OF CENTRAL AIR-HANdLINg UNITs - JANKA · • Directive 2010/31/EU Energy Performance of Buildings....
2
CASING QUALITY CATEGORIES AVAILABLE Marking Casing panel external metal sheet layer Casing panel internal metal sheet layer Corner profile STD Zinc-coated Zinc-coated Anodized aluminum zinc coating density 275 g/m 2 zinc coating density 275 g/m 2 STD 1 Steel sheet Zinc-coated Anodized aluminum painted by RAL 9002 zinc coating density 275 g/m 2 LAK Steel sheet Steel sheet Anodized aluminum lpainted by RAL 9002 lpainted by RAL 9002 LAK 1 Steel zinc-coated sheet Steel zinc-coated sheet Anodized aluminumý painted by any RAL color shade painted by any RAL color shade NER * Zinc-coated Stainless steel sheet AISI 304 Anodized aluminum zinc coating density 275 g/m 2 NER 1 Stainless steel sheet AISI 304 Stainless steel sheet AISI 304 Anodized aluminum * Only for indoor air-handling units. External joints between panels are sealed with putty on outdoor air-handling units. DESIGN CONFORMING TO CODES: • Directive 2010/31/EU Energy Performance of Buildings. • Low No. 299/2011 Energy Saving Management. • Regulation No. 337/2011 Energy Labeling and Ecodesign of Products Related to Energy Use. • ČSN EN 1886 - Air-handling units - mechanical properties. • ČSN EN 12599 - Testing procedures and measuring methods for handover of complete ventilation and air-conditioning equipment. • ČSN EN 15240 - Air-conditioning systems checks. • ČSN EN 15239 - Ventilation systems checks. • ČSN EN 13779 - Basic requirements on ventilation and air-conditioning systems. • ČSN EN 13053+A1 - Air-handling units - assessment and design of air-handling units, their components and parts. • VDI 6022 - Hygiene requirements on ventilation equipment. DELIVERY OPTIONS Fully assembled air-handling unit - Air-handling unit is assembled in JANKA ENGINEERING s.r.o. production facility and shipped as a one piece of equipment. Delivery of assembly blocks of air-handling unit - The air-handling unit is split into adequate number of installation blocks during the design process, size of which is to meet to transport needs and constraint conditions on site such as in plantrooms or roof transport paths. Delivery of disassembled air-handling unit - The air-handling unit is delivered completely disassembled to basic elements and parts such as casing sandwich panels, corner profiles, metal slide rails and fixing profiles, ventilators, motors, exchangers etc. Final field assembly of the unit is carried out by JANKA ENGINEERING s.r.o. staff inside the room of final installation (plantroom, roof etc.). This delivery option is particularly suitable for reconstruction projects or installation of new ventilation systems in plantrooms with difficult access or in heritage listed buildings. TYPICAL APPLICATIONS: • Hospital facilities with enhanced hygiene requirements. • Industrial facilities with strict clean room requirements (electronics production facility, pharmacy etc.) • Laboratories. • Swimming pool ventilation. • Reconstruction of ventilation equipment in heritage listed buildings. • Office buildings. • Shopping and culture centers. • Industrial applications. CASING SPECIFICATION according to the code ČSN EN 1886 Categorization Mineral wool Polyurethane Mechanical strength D1 D2 Tightness L2 L2 Heat transmission T2 T2 Thermal bridges TB2 TB2 CASING SPECIFICATION • 50mm thick sandwich casing panels • Mineral wool thermal insulation (grade of reaction to flame A1 conforms to ČSN EN 13501-1) OR • Polyurethane foam thermal insulation (grade of reaction to flame C3 conforms to ČSN EN 13501-1) MOST FLEXIBLE GENERATION OF CENTRAL AIR-HANDLING UNITS In reaction to the increasing quality demands, JANKA has come up with a new generation of central air-handling unit PremiAir complementing the existing range of our reputable products. The key advantage of the PremiAir unit is extraordinary flexibility. Thanks to the special modular structure of the unit allowing for as many as 32 basic cross-section sizes, the unit can be customized to almost any design requirement. Superior energy efficiency is a distinctive feature of the unit. New production range of air-handling units offers airflow rates from 800 up to 83,000 m 3 /h. During the design and engineering process, JANKA has drawn on many years of experience with design, production and servicing of air-handling units and ventilators. Thanks to JANKA’s above-standard technology and know-how background, a unique casing system has been developed conforming to stringent requirements set out in the latest updates of European codes. WE HAVE DEVELOPED THE MOST FLEXIBLE AIR-HANDLING UNIT ON THE MARKET! PremiAir is the most flexible JANKA air-handling unit as yet. It offers infinite number of installation versions and can be tailored to any design requirements whatsoever. Low energy use, maximum operational efficiency and minimized air leakage are of utmost priority to us. As a result, we have developed a unique casing system making the PremiAir air-handling units outstandingly efficient. • Modular structure - 32 basic cross-section sizes • Unique casing system providing prolonged service life • Direct installation of „BMS JANKA” control in the air-handling unit • Smooth inside surface without dead spots www.janka.cz I [email protected] I (+420) 251 088 777 3 2 BASIC CROSS-SECTION SIZES • • •
Transcript of OF CENTRAL AIR-HANdLINg UNITs - JANKA · • Directive 2010/31/EU Energy Performance of Buildings....
CAsINg QUALITY CATEgORIEs AvAILABLEMarking Casing panel external metal sheet layer Casing panel internal metal sheet layer Corner profi le
STD Zinc-coated Zinc-coated Anodized aluminum zinc coating density 275 g/m2 zinc coating density 275 g/m2 STD 1 Steel sheet Zinc-coated Anodized aluminum painted by RAL 9002 zinc coating density 275 g/m2 LAK Steel sheet Steel sheet Anodized aluminum lpainted by RAL 9002 lpainted by RAL 9002
LAK 1 Steel zinc-coated sheet Steel zinc-coated sheet Anodized aluminumý painted by any RAL color shade painted by any RAL color shade NER * Zinc-coated Stainless steel sheet AISI 304 Anodized aluminum zinc coating density 275 g/m2
NER 1 Stainless steel sheet AISI 304 Stainless steel sheet AISI 304 Anodized aluminum
* Only for indoor air-handling units. External joints between panels are sealed with putty on outdoor air-handling units.
DESIGN CONFORMING TO CODES:• Directive 2010/31/EU Energy Performance of Buildings.• Low No. 299/2011 Energy Saving Management.• Regulation No. 337/2011 Energy Labeling and Ecodesign of Products Related to Energy Use.• ČSN EN 1886 - Air-handling units - mechanical properties.• ČSN EN 12599 - Testing procedures and measuring methods for handover of complete ventilation and air-conditioning equipment.• ČSN EN 15240 - Air-conditioning systems checks.• ČSN EN 15239 - Ventilation systems checks.• ČSN EN 13779 - Basic requirements on ventilation and air-conditioning systems.• ČSN EN 13053+A1 - Air-handling units - assessment and design of air-handling units, their components and parts.• VDI 6022 - Hygiene requirements on ventilation equipment.
dELIvERY OPTIONs
Fully assembled air-handling unit- Air-handling unit is assembled in JANKAENGINEERING s.r.o. production facility andshipped as a one piece of equipment.Delivery of assembly blocks of air-handlingunit- The air-handling unit is split into adequatenumber of installation blocks during thedesign process, size of which is to meet totransport needs and constraint conditions onsite such as in plantrooms or roof transportpaths.Delivery of disassembled air-handling unit- The air-handling unit is deliveredcompletely disassembled to basic elementsand parts such as casing sandwich panels,corner profi les, metal slide rails and fi xingprofi les, ventilators, motors, exchangers etc.Final fi eld assembly of the unit is carried outby JANKA ENGINEERING s.r.o. staff insidethe room of fi nal installation (plantroom, roofetc.). This delivery option is particularlysuitable for reconstruction projects orinstallation of new ventilation systems inplantrooms with diffi cult access or inheritage listed buildings.
TYPICAL APPLICATIONs:• Hospital facilities with enhanced hygiene requirements.• Industrial facilities with strict clean room requirements (electronics production facility, pharmacy etc.)• Laboratories.• Swimming pool ventilation.• Reconstruction of ventilation equipment in heritage listed buildings.• Offi ce buildings.• Shopping and culture centers.• Industrial applications.
CAsINg sPECIFICATION according to the code ČSN EN 1886 Categorization
Mineral wool PolyurethaneMechanical strength D1 D2Tightness L2 L2Heat transmission T2 T2Thermal bridges TB2 TB2
CAsINg sPECIFICATION
• 50mm thick sandwich casing panels• Mineral wool thermal insulation (grade of reaction to fl ame A1 conforms to ČSN EN 13501-1)
OR
• Polyurethane foam thermal insulation (grade of reaction to fl ame C3 conforms to ČSN EN 13501-1)
MOsT FLEXIBLE gENERATIONOF CENTRAL AIR-HANdLINg UNITs
In reaction to the increasing quality demands, JANKA has come up with a new generation of central air-handling unit PremiAir complementing the existing range of our reputable products. The key advantage of the PremiAir unit is extraordinary fl exibility. Thanks to the special modularstructure of the unit allowing for as many as 32 basic cross-section sizes, the unit can be customized to almost any design requirement.
Superior energy effi ciency is a distinctive feature of the unit. New production range of air-handling units off ers airfl ow rates from 800 up to 83,000 m3/h.
During the design and engineering process, JANKA has drawn on many years of experience with design, production and servicing of air-handling units and ventilators. Thanks to JANKA’s above-standard technology and know-how background, a unique casing system has been developed conforming to stringent requirements set out in the latest updates of European codes.
WE HAVE DEVELOPED THE MOST FLEXIBLE AIR-HANDLING UNIT ON THE MARKET!
PremiAir is the most fl exible JANKA air-handling unit as yet. It off ers infi nite number ofinstallation versions and can be tailored to any design requirements whatsoever. Lowenergy use, maximum operational effi ciency and minimized air leakage are of utmostpriority to us. As a result, we have developed a unique casing system making thePremiAir air-handling units outstandingly effi cient.
• Modular structure - 32 basic cross-section sizes
• Unique casing system providing prolonged service life
• Direct installation of „BMS JANKA” control in the air-handling unit
• Smooth inside surface without dead spots
www.janka.cz I [email protected] I (+420) 251 088 777 32BASICCROSS-SECTIONSIZES
•
•
•
FLEXIBLE APPLICATION
Modular construction of PremiAirair-handling units enables customizingthe height, width and length of the unit tomatch the actual requirements of a project.
32 basic cross-section sizes.
Basic modular dimension of 155mm and 310mm enablesdesign of great variety of space configurations.
MAIN AdvANTAgEs:• Design of air-handling unit customized to meet needs of actual project.• Smooth internal surface without dead spots and folds enables easy cleaning and avoids bacterial growth and dust accumulation in deficiently flushed areas.• Well-engineered design of the air-handling units contributes to reduce energy use to a minimum.• No special tools necessary for unit’s assembly thanks to sophisticated construction of unit’s components.• Possibility of delivery of fully assembled unit as one shipping unit up to overall length of 5,910mm.• Optional installation of an open control system “BMS JANKA” direct inside the unit.• Installation of built-in cooling circuit including stepless controlled reciprocating or scroll compressor and safety elements pre-filled with R407C or R410A refrigerants.• Outstanding casing quality with prolonged service life.• High quality components proved by EUROVENT certificates.• Fan motors with EFF1 (IE2) efficiency rating or EC motors.• Easy field installation, authorized JANKA service.• Basic warranty as many as 60 months.
EXTRAORdINARY QUALITY LEvEL• Production process certified in accordance with ISO 9001 by certification institute TÜV SÜD Czech• Production of each component is subject of several interim checks. Once assembled, the transport blocks of air-handling units are subject of final visual and functional review and testing.• All workplaces at the production line adhere to the principles of “5S” methodology are their performance is being permanently assessed and improved on weekly basis.
The result of implementation ofadvanced tools for quality checks is a high-quality product we can offer to our customers manufactured under lower production costs.
ENERGY EFFICIENCYPremiAir air-handling units designed for optimum energy efficiency considering specificneeds of each project.
Energy Airflow velocity Heat recovery Pressure loss Energy efficiency efficiency class at unobstructed cross-section efficiency (%) at heat recovery (Pa) of fan air movement (-)
A ≤ 1,8 ≥ 75 ≤ 280 ≤ 0,9B ≤ 2,0 ≥ 67 ≤ 230 ≤ 0,95C ≤ 2,2 ≥ 57 ≤ 170 ≤ 1,0D ≤ 2,5 ≥ 47 ≤ 125 ≤ 1,06E ≤ 2,8 ≥ 37 ≤ 100 ≤ 1,12F No extra requirements.G Dedicated ventilator chamber.
Type title External dimensionsAxB (mm)
TYPICAL STANDARD CROSS-SECTION SIZE
SUPPLEMENTARY CROSS-SECTION SIZE
