Certification of products including material products ... · ČSN P CEN/TS 15117 ČSN EN 15725 b)...
Transcript of Certification of products including material products ... · ČSN P CEN/TS 15117 ČSN EN 15725 b)...
The Appendix is an integral part of
Certificate of Accreditation No. 689/2020 of 12/11/2020
Accredited entity according to ČSN EN ISO/IEC 17065:2013:
PAVUS, a.s. Product Certification Body
Prosecká 412/74, 190 00 Praha 9 - Prosek
Page 1 of 27 11_01-P508_V-20130510
Certification of products (including material products, processes, services)
Material Products
Ordinal number1)
Product/Product group name Certification scheme Specification of standards
(normative documents)
1 Fire safety storage cabinets, secure
storage units, storage cabinets
PAVUS-2 (follows
from the scheme 5
ISO/IEC 17067, based
on testing and SM
audit)
ČSN 91 6010
ČSN EN 14470-1
ČSN EN 14470-2
ČSN EN 1047-1
ČSN EN 1047-2
ČSN EN 1143-1
ČSN EN 15659
ČSN EN 1300
2 Cables and wires
Cable tray systems and cable ladder
systems preserving functionality in the
case of fire
PAVUS-2 (follows
from the scheme 5
ISO/IEC 17067, based
on testing and SM
audit)
ČSN 73 0848
ČSN EN 61537 ed. 2
DIN 4102-12
ZP-27/2008:2008, p. 10, 11
ČSN EN 1366-11, p.13
ČSN EN 50575
ČSN EN 50577, Annex B
ČSN EN 50200 ed. 3, Annex D
ID to the Council Directive 89/106/ EEC,
bas. req. no. 2:1994
ČSN 73 0895
STN 92 0205
STN 92 0206
3* Fire classification of construction
products and building elements:
a) material building products
PAVUS-1 (follows
from the scheme 1a
ISO/IEC 17067, based
on SM audit and from
the scheme 1b
ISO/IEC 17067, based
on testing)
ČSN EN 13501-1+A1
ČSN EN 13501-1
ČSN 73 0810
ČSN 73 0824
ČSN 73 0863
ČSN ISO 13785-1
ISO 13785-2
Commission Decision 2006/751/ES:2006
b) general building products ČSN EN 13501-2
ČSN 73 0821 ed. 2
ČSN 73 0822
ČSN 73 0865
ZP-28/2004:2004
c) fire resisting ducts and fire dampers ČSN EN 13501-3+A1
d) smoke control systems ČSN EN 13501-4
e) roofs, roof cladding ČSN EN 13501-5
f) electric cables ČSN EN 13501-6
ČSN EN 13501-6 ed. 2
ČSN EN 50200
ČSN EN 50575
The Appendix is an integral part of
Certificate of Accreditation No. 689/2020 of 12/11/2020
Accredited entity according to ČSN EN ISO/IEC 17065:2013:
PAVUS, a.s. Product Certification Body
Prosecká 412/74, 190 00 Praha 9 - Prosek
Page 2 of 27 11_01-P508_V-20130510
Ordinal number1)
Product/Product group name Certification scheme Specification of standards
(normative documents)
ČSN CLC/TS 50576
4* Fire classification of construction
products and building elements on the
basis of extended application of test
results:
a) reaction to fire
ČSN EN
ISO/IEC 17067:2014,
scheme 1a and 1b
ČSN EN 13501-1+A1
ČSN EN 13501-1
ČSN 73 0810
ČSN P CEN/TS 15117
ČSN EN 15725
b) fire resistance
ČSN EN 13501-2
ČSN 73 0810
ČSN EN 81-58
ČSN EN 15080-8
ČSN EN 15080-12
prEN 15080-13:2009
ČSN EN 15254-2
ČSN EN 15254-4
ČSN EN 15254-5
ČSN EN 15254-6
ČSN EN 15254-7
ČSN EN 15269-1
ČSN EN 15269-2
ČSN EN 15269-3
ČSN EN 15269-5+A1
prEN 15269-6:2014
ČSN EN 15269-7
ČSN EN 15269-10
ČSN EN 15269-11+AC
ČSN EN 15269-20
ČSN EN 15882-3
ČSN EN 15882-4
ČSN EN 13501-3+A1
ČSN EN 13501-4
ČSN 73 0810
ČSN EN 15882-1+A1
ČSN EN 15882-2
c) roofs, roof cladding ČSN P CEN/TS 16459
ČSN EN 13501-5
5 Building products, determination,
evaluation and assessment of
conformity
PAVUS-2 (follows
from the scheme 5
ISO/IEC 17067, based
on testing and SM
audit)
ČSN 73 0540-2
ČSN 73 0810
ČSN 73 0532
ČSN 73 2030
ČSN 74 4505
ČSN EN 1990
ČSN EN 1990 ed. 2
ČSN EN 1991-1-1
The Appendix is an integral part of
Certificate of Accreditation No. 689/2020 of 12/11/2020
Accredited entity according to ČSN EN ISO/IEC 17065:2013:
PAVUS, a.s. Product Certification Body
Prosecká 412/74, 190 00 Praha 9 - Prosek
Page 3 of 27 11_01-P508_V-20130510
Ordinal number1)
Product/Product group name Certification scheme Specification of standards
(normative documents)
PAVUS-3 (follows
from the scheme 5
ISO/IEC 17067, based
on testing and SM
audit)
ČSN EN 1991-1-2
ČSN EN 1991-1-3
ČSN EN 1991-1-3 ed.2
ČSN EN 1991-1-4
ČSN EN 1991-1-4 ed.2
ČSN EN 1991-1-5
ČSN EN 1993-1-1
ČSN EN 1993-1-1 ed.2
ČSN EN 1993-1-2
ČSN EN 1995-1-1
ČSN EN 1995-1-2
ČSN EN ISO 11600
MoI Regulation No. 202/1999 Coll.
ID to the Council Directive 89/106/ EEC,
bas. req. no. 2: 1994
TR 035:2009 1) Asterisk at the ordinal number identifies that within the scope of accreditation, the certification body is allowed to include
new/updated/revised normative documents from time to time. Current list of activities based on the flexible scope of
accreditation is available from the Certification Body from the Certification Body Manager.
Accreditation for authorization / notification purposes
Ordinal number
1)
Product/Product group name Conformity assessment
procedure/module
Basic requirements:
Product specifications/
characteristics/ technical
standards 2)
1 Construction products acc. to GR No. 163/2002 Coll.
1.1* Construction products for concrete and reinforced concrete parts of buildings
1.1.1* Non load-bearing permanent shuttering
kits/systems, to be filled with normal
concrete and, where relevant, with
reinforcement, based on either blocks made
of an insulating material (or a combination
of an insulating material and other
materials)
a) for the construction of external and
internal walls subject to fire regulations, in
buildings, with the prescribed level
A11, A21, B1, C1
A12, A22, B2, C2, D, E, (A1 to E)3, F
(product group 1/12)
Gov. Reg. No. 163/2002 Coll.
§ 5, 5a, 6
TN 01_12_01 a, b
TN 01_12_02 a, b
1.2* Construction products for masonry buildings
1.2.1* Masonry elements with built-in thermal
insulation materials on the surface and
inside, which may be exposed to fire in
walls and partitions, subject to reaction to
fire requirements with the prescribed level
A11, A21, B1, C1
A12, A22, B2, C2, D ,E
(A1 to E)3, F
(product group 2/4)
Gov. Reg. No. 163/2002 Coll.
§ 5, 5a, 6
TN 02_04_01
The Appendix is an integral part of
Certificate of Accreditation No. 689/2020 of 12/11/2020
Accredited entity according to ČSN EN ISO/IEC 17065:2013:
PAVUS, a.s. Product Certification Body
Prosecká 412/74, 190 00 Praha 9 - Prosek
Page 4 of 27 11_01-P508_V-20130510
Ordinal number
1)
Product/Product group name Conformity assessment
procedure/module
Basic requirements:
Product specifications/
characteristics/ technical
standards 2)
1.3* Building products made of wood and wooden structures
1.3.1* Timber frame and log prefabricated
building kits
(product group 3/2)
Gov. Reg. No. 163/2002 Coll.
§ 5, 5a
TN 03_02_01
1.3.2* Structural glued laminated products and
other glued timber products
Bridge elements, truss elements, floor
elements, wall elements, roof elements,
ceiling elements and roofing elements such
as beams, arches, joists, rafters, columns,
poles, piles etc.
Truss beams, floors, walls, roofs, frames,
stairs.
The products may or may not be treated
against fire or biological damage.
(product group 3/4)
Gov. Reg. No. 163/2002 Coll.
§ 5, 5a
TN 03_04_05
TN 03_04_06
TN 03_04_07
TN 03_04_08
ČSN EN 300
ČSN EN 312
ČSN EN 315
ČSN EN 338
ČSN EN 384+A1
ČSN EN 622-1
ČSN EN 622-2
ČSN EN 622-3
ČSN EN 622-4
ČSN EN 622-5
ČSN EN 635-1
ČSN EN 635-2
ČSN EN 635-3
ČSN EN 636+A1
ČSN EN 942
ČSN EN 1058
ČSN EN 1438
ČSN EN 12369-1
ČSN EN 12825
ČSN EN 13213
ČSN EN 13271
ČSN EN 14964
ČSN EN 26891
ČSN 49 2120
ČSN 49 2411
ČSN 73 2810
ČSN 73 4130
1.3.3* Elements for timber-concrete composite
structures
(product group 3/8)
Gov. Reg. No. 163/2002 Coll.
§ 5, 6
TN 03_08_01
TN 03_08_02
TN 03_08_03
1.4* Building products for metal structures
1.4.1* Structural metal construction products
a) finished metallic products such as
girders, columns, stairs, piles and sheet
piling, rails and sleepers, products cut to
size sections designed for certain
applications
These products can be used in bearing
structures including the foundation
structures for building construction and
civil engineering
b) finished metallic frame structures for
suspended ceilings (high load) for the use
in frame structures of buildings
subject to reaction to fire regulations with
the prescribed level
A11, A21, B1, C1
A12, A22, B2, C2, D, E, (A1 to E)3,F
With or without corrosion protection
Gov. Reg. No. 163/2002 Coll.
§ 5, 5a, 6
TN 04_02_01_a_b
TN 04_02_08_a
TN 04_02_09_a_b
ČSN 74 6930
The Appendix is an integral part of
Certificate of Accreditation No. 689/2020 of 12/11/2020
Accredited entity according to ČSN EN ISO/IEC 17065:2013:
PAVUS, a.s. Product Certification Body
Prosecká 412/74, 190 00 Praha 9 - Prosek
Page 5 of 27 11_01-P508_V-20130510
Ordinal number
1)
Product/Product group name Conformity assessment
procedure/module
Basic requirements:
Product specifications/
characteristics/ technical
standards 2)
coating, welded or non-welded
(product group 4/2)
1.5* Protective thermal insulation materials and products, waterproofing materials,
roof coverings and adhesives 1.5.1* Damp-proofing
a) waterproofing layers, roof underlays,
water vapour control layers in buildings,
liquid applied roof waterproofing kits
b) flexible sheets for waterproofing, roof
flexible sheets for waterproofing in
buildings
c) flexible sheets for waterproofing,
waterproofing layers, roof underlays, roof
flexible sheets for waterproofing, water
vapour control layers, liquid applied roof
waterproofing kits for uses subject to
reaction to fire regulations with the
prescribed level
A11, A21, B1, C1
A12, A22, B2, C2, D, E
(A 1 to E)3, F
d) roof underlays, flexible sheets for
waterproofing, liquid applied roof
waterproofing kits for uses subject to
requirements for the classification of roof
loading by external fire
- products requiring testing
- products "considered conforming"
without testing
(product group 5/2)
Gov. Reg. No. 163/2002 Coll.
§ 5, 5a, 6, 7
TN 05_02_01_a_b_c_d
TN 05_02_02_a_b
TN 05_02_03_a_b_c_d
TN 05_02_04_a_b_c_d
TN 05_02_05_a_b_c_d
ČSN EN 13967+A1
ČSN EN 13491 ed. 2
1.5.2* Roofing tiles, slates, stones and shingles,
factory-bonded composite or sandwich
panels
a) for uses subject to fire resistance
requirements (e.g. for the separation of fire
sections)
b) for uses subject to reaction to fire
regulations with the prescribed level
A11, A21, B1, C1
A12, A22, B2, C2, D, E
(A1 to E)3, F
c) for uses subject to requirements
for the classification of roof loading by
external fire
- products requiring testing
- products "considered conforming"
without testing
d) for uses contributing to the
reinforcement of roof structure
e) for uses subject to hazardous substances
regulations
f) for other uses
(product group 5/6)
Gov. Reg. No. 163/2002 Coll.
§ 5, 5a, 7
TN 05_06_01_b_c
TN 05_06_03_a_b_c_d
TN 05_06_04_a_b
TN 05_06_06_b_c
ČSN EN 490+A1
ČSN EN 501
ČSN EN 612
ČSN 73 1901
1.5.3* Self-supporting translucent roof kits
(excluding glass-based kits)
a) for use in roofs and roof finishes
b) for uses subject to requirements for the
Gov. Reg. No. 163/2002 Coll.
§ 5, 5a, 7
TN 05_07_01_a_b_c
TN 05_07_02_a
TN 05_07_02_c
The Appendix is an integral part of
Certificate of Accreditation No. 689/2020 of 12/11/2020
Accredited entity according to ČSN EN ISO/IEC 17065:2013:
PAVUS, a.s. Product Certification Body
Prosecká 412/74, 190 00 Praha 9 - Prosek
Page 6 of 27 11_01-P508_V-20130510
Ordinal number
1)
Product/Product group name Conformity assessment
procedure/module
Basic requirements:
Product specifications/
characteristics/ technical
standards 2)
classification of roof loading by external
fire
- products requiring testing
- products "considered conforming”
without testing
c) for uses subject to reaction to fire
regulations with the prescribed level
A11, A21, B1, C1
A12, A22, B2, C2, D, E
(A1 to E)3, F
(product group 5/7)
1.5.4* a) Fascias and soffit boards for uses subject
to reaction to fire regulations with the
prescribed level
A11, A21, B1, C1
A12, A22, B2, C2, D, E
(A1 to E)3, F
b) Roof access systems, walkways
and footholds, accessories for roof
coverings for uses subject to requirements
for the classification of roof loading by
external fire
- products requiring testing
- products "considered conforming"
without testing
c) Fascias and soffit boards, mechanical
fasteners for roofing, accessories for roof
coverings for other uses
(product group 5/8)
Gov. Reg. No. 163/2002 Coll.
§ 5, 5a, 7
TN 05_08_05_a_c
TN 05_08_08_c
TN 05_08_10_b_c
TN 05_08_13_b
TN 05_08_14_b
TN 05_08_15_b_c
TN 05_08_16_b_c
ČSN EN 607
ČSN EN 612
1.5.5* External thermal insulation systems
including mounted with/without an air gap
and window insulation inserts
a) for external walls subject to reaction to
fire requirements with the prescribed level
A11,A21,B1,C1
A12,A22,B2,C2, D, E (A1 to E)3, F
b) for external walls not subject to reaction
to fire requirements
(product group 5/10)
Gov. Reg. No. 163/2002 Coll.
§ 5, 5a
TN 05_10_01_a_b
TN 05_10_02_a_b
TN 05_10_03_a_b
1.5.6* Sealants, mortars, adhesives and sealing
tapes
a) for structural use in building
construction and civil engineering
b) for indoor and outdoor use in building
construction and civil engineering
c) for uses subject to reaction to fire
regulations with the prescribed level
A11, A21, B1, C1
A12, A22, B2 , C2, D, E
(A1 to E)3,, F
(product group 5/11)
Gov. Reg. No. 163/2002 Coll.
§ 5, 5a, 6, 7
TN 05_11_01_c
TN 05_11_03_b
TN 05_11_04_b
TN 05_11_05_b
TN 05_11_11_a_b_c
1.5.7* Fire stopping, fire sealing and fire
protective products (including protective
coatings)
a) subject to fire resistance requirements
b) for uses subject to reaction to fire
regulations with the prescribed level
A11, A21, B1, C1
Gov. Reg. No. 163/2002 Coll.
§ 5, 5a, 7
TN 05_12_01_a_b
TN 05_12_02_a_b
The Appendix is an integral part of
Certificate of Accreditation No. 689/2020 of 12/11/2020
Accredited entity according to ČSN EN ISO/IEC 17065:2013:
PAVUS, a.s. Product Certification Body
Prosecká 412/74, 190 00 Praha 9 - Prosek
Page 7 of 27 11_01-P508_V-20130510
Ordinal number
1)
Product/Product group name Conformity assessment
procedure/module
Basic requirements:
Product specifications/
characteristics/ technical
standards 2)
A12, A22, B2 , C2, D, E
(A1 to E)3, F
(product group 5/12)
1.5.8* Products for fire retardant coatings,
coverings, spray-coatings
(product group 5/13)
Gov. Reg. No. 163/2002 Coll.
§ 5, 5a
TN 05_13_01
TN 05_13_02
TN 05_13_03
TN 05_13_04
1.5.9* Wood impregnation agents, protective
paints and coatings for wood, metals and
masonry
(product group 5/14)
Gov. Reg. No. 163/2002 Coll.
§ 5
TN 05_14_01
TN 05_14_02
TN 05_14_03
TN 05_14_04
ČSN EN 442-1, ed. 2
ČSN EN 927-1
ČSN EN 927-2
ČSN EN ISO 12944-1
ČSN EN ISO 12944-2
ČSN EN ISO 12944-6
ČSN EN 16623
ČSN 49 0630
1.6* Glass building products
1.6.1* Flat, curved, profiled, insulated glazing
a) for use in glazing kits subject to fire
resistance regulations including surface
spread of fire
b) for uses subject to reaction to fire
regulations with the prescribed level
A1, A2, B, C, D, E
(A1 to E)3 F
c) for uses subject to requirements
for the classification of roof loading by
external fire
- products requiring testing
- products "considered conforming"
without testing
(product group 6/1)
Gov. Reg. No. 163/2002 Coll.
§ 5, 5a, 7
TN 06_01_01_a_b
TN 06_01_02_c
TN 06_01_03_b_ c
1.6.2* Glass block and wall panels made of glass
blocks
a) for use in glazing kits subject to fire
resistance regulations
b) for uses subject to reaction to fire
regulations with the prescribed level
A1, A2, B, C, D, E
(A1 to E)3 F
c) for use as bullet-proof or blast-proof
glass
d) for other uses subject to “safety risks in
use” to which such regulations apply
e) for uses related to the reduction of
energy consumption and/or noise
f) for other uses
(product group 6/5)
Gov. Reg. No. 163/2002 Coll.
§ 5, 5a, 7
TN 06_05_01_a_b_c
TN 06_05_02_d_e
TN 06_05_03_f
1.7* Construction products for sewerage systems and distribution of liquids and gases
1.7.1* Pipeline systems, pipes, tanks, leakage
alarm systems and overfill prevention
equipment, valves, adhesives, fittings,
sealing for fittings and gaskets, pipelines
and protective conduits, bearing structures
Gov. Reg. No. 163/2002 Coll.
§ 5, 5a, 7
TN 07_08_11_b
TN 07_08_12_b
TN 07_08_13_b
TN 07_08_14_b
TN 07_08_18_b
The Appendix is an integral part of
Certificate of Accreditation No. 689/2020 of 12/11/2020
Accredited entity according to ČSN EN ISO/IEC 17065:2013:
PAVUS, a.s. Product Certification Body
Prosecká 412/74, 190 00 Praha 9 - Prosek
Page 8 of 27 11_01-P508_V-20130510
Ordinal number
1)
Product/Product group name Conformity assessment
procedure/module
Basic requirements:
Product specifications/
characteristics/ technical
standards 2)
for pipes and pipelines, safety accessories
(except tube assemblies and their elements
from plastic and rubber)
a) in installations for transport, distribution
and storage of water intended for human
consumption
b) in installations for transport, distribution
and storage of water not intended for
human consumption, if they are subject to
reaction to fire requirements with the
prescribed level
A11, A21, B 1, C 1
A1 2, A2 2, B 2, C 2, D, E
(A1 to E) 3, F
c) in installations for transport, distribution
and storage of water not intended for
human consumption and for heating
systems, if they are subject to energy
saving requirements
(product group 7/8)
TN 07_08_21_b
TN 07_08_22_a_b_c
TN 07_08_23_a_ b_ c
TN 07_08_24_a_ b_ c
TN 07_08_26_a_b_ c
TN 07_08_27_a_b_c
TN 07_08_34_b
ČSN EN 681-1
ČSN EN 681-2+A1
ČSN EN 681-3+A1
ČSN EN 681-4 +A1
ČSN EN 1123-1
ČSN EN 1124-1
ČSN EN 1253-1
ČSN EN 1253-2
1.7.2* Pipeline systems, pipes, tanks, leakage
alarm systems and overfill prevention
equipment, valves, adhesives, sealing for
fittings and gaskets, pipelines, bearing
structures for pipes and pipelines, safety
accessories (excluding plastic pipeline
systems, gas hoses and transition joints)
a) in installations for transport/distribution/
storage of gas/fuel supplying
heating/cooling systems of buildings from
an external reservoir or from the last mains
control equipment to the inlet of the
building heating/cooling systems
b) in installations subject to fire resistance
requirements designed for
transport/distribution/storage of gas/fuel
supplying heating/cooling systems of
buildings from an external reservoir or
from the last mains control equipment to
the inlet of the building heating/cooling
systems
c) in installations subject to reaction to fire
requirements designed for
transport/distribution/storage of gas/fuel
supplying heating/cooling systems of
buildings from an external reservoir or
from the last mains control equipment to
the inlet of the building heating/cooling
systems
(product group 7/10)
Gov. Reg. No. 163/2002 Coll.
§ 5, 5a, 7
TN 07_10_05_b_c
TN 07_10_07_b_c
TN 07_10_15_a_b_c
TN 07_10_16_a_b_c
TN 07_10_17_a_b_c
TN 07_10_18_a_c
TN 07_10_19_a_c
TN 07_10_20_b
TN 07_10_21_a_c
TN 07_10_22_a_b_c
TN 07_10_23_a_b_c
ČSN EN 1775 ed. 2, Annex A
ČSN EN 15266
1.8* Construction products for doors and windows
1.8.1* Windows, doors and gates (with or without
related hardware) for the separation of
fire/smoke sections and for emergency
routes
(product group 8/1)
Gov. Reg. No. 163/2002 Coll.
§ 5
TN 08_01_01_a
TN 08_01_01_b
TN 08_01_02
TN 08_01_03
ČSN EN 81-58
ČSN EN 1527
ČSN EN 1529
The Appendix is an integral part of
Certificate of Accreditation No. 689/2020 of 12/11/2020
Accredited entity according to ČSN EN ISO/IEC 17065:2013:
PAVUS, a.s. Product Certification Body
Prosecká 412/74, 190 00 Praha 9 - Prosek
Page 9 of 27 11_01-P508_V-20130510
Ordinal number
1)
Product/Product group name Conformity assessment
procedure/module
Basic requirements:
Product specifications/
characteristics/ technical
standards 2)
ČSN EN 1530
ČSN EN 1627
ČSN EN 1670
ČSN 16 5190
ČSN 16 5771
ČSN 16 6110
ČSN EN 12209
ČSN EN 12365-1
ČSN EN 14351-2
1.8.2* Hardware for doors and gates for the
separation of fire/smoke sections and for
emergency routes, for the protection
against pressure water
(product group 8/2)
Gov. Reg. No. 163/2002 Coll.
§ 5, 5a
TN 08_02_01
1.8.3* Windows, doors and gates (with and
without related hardware) for uses subject
to specific requirements, especially
requirements for noise and heat protection,
tightness and safety
(product group 8/3)
Gov. Reg. No. 163/2002 Coll.
§ 5, 5a, 7
TN 08_03_01
TN 08_03_02
1.8.4* Frames
(product group 8/5) Gov. Reg. No. 163/2002 Coll.
§ 5, 5a, 7
TN 08_05_01
1.8.5* Roof lights, roof windows
a) for uses subject to fire resistance
requirements (e.g. for the separation of fire
sections)
b) for uses subject to reaction to fire
regulations with the prescribed level
A11, A21, B1, C1
A12, A22, B2, C2, D, E
(A1 to E) 3, F
c) for uses subject to requirements
for the classification of roof loading by
external fire
- products requiring testing
- products "considered conforming"
without testing
d) for uses contributing to the
reinforcement of roof structure
e) for uses subject to hazardous substances
regulations
f) for other uses
(product group 8/6)
Gov. Reg. No. 163/2002 Coll.
§ 5, 5a, 7
TN 08_06_01_a_b_c_d_e_f
TN 08_06_02_a_b_c_d_e_f
ČSN EN 1873+A1
ČSN EN 14963
ČSN 74 6350
1.9* Special materials, products, structures and equipment
1.9.1* Internal partition kits
a) for uses subject to reaction to fire
regulations with the prescribed level
A11, A21, B 1, C 1
A12, A22, B2, C2, D, E
(A1 to E )3, F
b) for use in kits subject to fire resistance
regulations
c) for uses subject to hazardous substances
regulations
d) for uses subject to safety in use risks
e) for other uses
(product group 9/7)
Gov. Reg. No. 163/2002 Coll.
§ 5, 5a, 7
TN 09_07_01_a_b_c_d_e
The Appendix is an integral part of
Certificate of Accreditation No. 689/2020 of 12/11/2020
Accredited entity according to ČSN EN ISO/IEC 17065:2013:
PAVUS, a.s. Product Certification Body
Prosecká 412/74, 190 00 Praha 9 - Prosek
Page 10 of 27 11_01-P508_V-20130510
Ordinal number
1)
Product/Product group name Conformity assessment
procedure/module
Basic requirements:
Product specifications/
characteristics/ technical
standards 2)
1.9.2* Structural sealant glazing systems with
mechanical means for the transfer of dead
weight of the glass to the sealant frame
and, from there, to the bearing structure for
external walls and roofing
a) for the transfer of forces fully dependent
on the structural sealing system
b) for reducing danger in case of sealing
failure
(product group 9/8)
Gov. Reg. No. 163/2002 Coll.
§ 5, 5a, 6
TN 09_08_01_a_b
TN 09_08_02_a_b
ČSN EN 15651-1 ed. 3
1.9.3* Curtain walling systems
a) as external walls subject to reaction to
fire requirements with the prescribed level
A11, A21, B11, C1
A12, A22, B2, C2, D, E, (A1 to E)3, F
b) as external walls not subject to reaction
to fire requirements
c) for use in kits subject to fire resistance
regulations including spread of fire
(product group 9/9)
Gov. Reg. No. 163/2002 Coll.
§ 5, 5a, 7
TN 09_09_01_a_b_c
ČSN EN 14019
ČSN EN 16758
1.9.4* Prefabricated building units
(product group 9/26) Gov. Reg. No. 163/2002 Coll.
§ 5, 6
TN 09_26_01
1.10* Site equipment
1.10.1* Prefabricated chimneys (floor height
elements), flue liners (elements or blocks),
multilayer chimneys (elements or blocks),
single-layer chimney blocks, parts of free-
standing chimneys and adjacent chimneys
(product group 10/1)
Gov. Reg. No. 163/2002 Coll.
§ 5, 6
ČSN EN 1443
ČSN EN 13384-1+A1
ČSN EN 13384-2+A1
ČSN EN 13084-6
ČSN 73 4201 ed.2
1.10.2* Chimney stacks
(product group 10/2) Gov. Reg. No. 163/2002 Coll.
§5, 5a, 7
ČSN EN 16475-2
ČSN EN 16475-3+A1
ČSN EN 16475-7
1.10.3* Fixed fire-fighting systems (products for
fire alarm/detection, fixed extinguishing,
fire and smoke control, and explosion
suppression)
(excluding products for explosion
suppression)
(product group 10/3)
Gov. Reg. No. 163/2002 Coll.
§ 5, 5a
TN 10_03_03
TN 10_03_11
TN 10_03_12
TN 10_03_13
TN 10_03_14
TN 10_03_15
TN 10_03_16
TN 10_03_17
TN 10_03_18
TN 10_03_19
TN 10_03_20
TN 10_03_21
TN 10_03_26
TN 10_03_27
TN 10_03_28
TN 10_03_32
TN 10_03_33
TN 10_03_34
TN 10_03_35
TN 10_03_36
TN 10_03_37
TN 10_03_38
TN 10_03_39
TN 10_03_44
TN 10_03_46
The Appendix is an integral part of
Certificate of Accreditation No. 689/2020 of 12/11/2020
Accredited entity according to ČSN EN ISO/IEC 17065:2013:
PAVUS, a.s. Product Certification Body
Prosecká 412/74, 190 00 Praha 9 - Prosek
Page 11 of 27 11_01-P508_V-20130510
Ordinal number
1)
Product/Product group name Conformity assessment
procedure/module
Basic requirements:
Product specifications/
characteristics/ technical
standards 2)
TN 10_03_48
TN 10_03_49
TN 10_03_52
TN 10_03_53
TN 10_03_54
TN 10_03_55
TN 10_03_56
TN 10_03_57
TN 10_03_58
TN 10_03_59
TN 10_03_60
TN 10_03_61
TN 10_03_62
TN 10_03_63
TN 10_03_64
ČSN 34 2710
ČSN 73 0875
ČSN EN 54-1
ČSN EN 54-13
ČSN EN 54-22
ČSN EN 54-26
ČSN EN 54-27
ČSN EN 54-28
ČSN EN 54-29
ČSN EN 54-30
ČSN EN 54-31+A1
ČSN EN 16763
ČSN EN 50130-4 ed. 2
ČSN EN 55032 ed. 2
ČSN EN 50561-1
ČSN EN 60950-1 ed. 2
ČSN EN 61000-6-1 ed. 2
ČSN EN 61000-6-2 ed. 4
ČSN EN 61000-6-3 ed. 2
ČSN EN 61000-6-4 ed. 2
ČSN 07 8304
ČSN EN 1074-6
ČSN EN 12094-16
ČSN P CEN/TR 12101-4
ČSN P CEN/TR 12101-5
ČSN EN 12259-9
ČSN EN 12236
pr EN 12259-12:2005
ČSN EN 12416-1+A2
ČSN EN 12416-2+A1
ČSN EN 12845
ČSN EN 13403
ČSN EN 13565-1
ČSN EN 13565-2+AC
ISO 14520-1
ČSN P CEN/TS 14816
ČSN P CEN/TS 14972
ČSN EN 15004-1
ČSN EN 15276-1
ČSN EN 15276-2
ČSN EN 16750
ČSN EN 16763
ČSN EN 16925
The Appendix is an integral part of
Certificate of Accreditation No. 689/2020 of 12/11/2020
Accredited entity according to ČSN EN ISO/IEC 17065:2013:
PAVUS, a.s. Product Certification Body
Prosecká 412/74, 190 00 Praha 9 - Prosek
Page 12 of 27 11_01-P508_V-20130510
Ordinal number
1)
Product/Product group name Conformity assessment
procedure/module
Basic requirements:
Product specifications/
characteristics/ technical
standards 2)
ČAP CEA 4001:2004
NFPA 11
NFPA 13
NFPA 20:2013, chap. 4, 6, 7, 9, 10,
11; 12
NFPA 750:2015
NFPA 2001
ČSN ISO 6183
ONORM F 3007
ONORM F 3008
ONORM F 3073
VdS 2100-06
VdS 2100-07
VdS 2100-09
VdS 2100-13
VdS 2100-18
VdS 2100-20
VdS 2100-24
VdS 2100-26
VdS 2100-29
VdS 2100-30
VdS 3527
FM Approval 1011
FM Approval 1012
FM Approval 1020
FM Approval 1112
FM Approval 1120/1130
FM Approval 2000
FM Approval 2008
UL 199
UL 2166
UL 2167
BS 7346-7
1.10.4* Fire shutters excluding products listed
under the ord. number 1 in tab. 8
(product group 10/4)
Gov. Reg. No. 163/2002 Coll.
§ 5
TN 10_04_01
TN 10_04_02
TN 10_04_05
TN 10_04_06
TN 10_04_07
TN 10_04_09
ČSN EN 14975+A1
1.10.5* Distribution systems of air-handling and
air-conditioning equipment
a) for uses subject to fire safety regulations,
b) for uses not subject to fire safety
regulations,
(product group 10/9)
Gov. Reg. No. 163/2002 Coll.
§ 5, 5a, 7
TN 10_09_01_a
TN 10_09_01_b
TN 10_09_02_a
TN 10_09_02_b
1.10.6* Fasteners and fastening systems for
pipelines and air-handling ducts
a) for uses subject to fire safety regulations,
b) for uses not subject to fire safety
regulations,
(product group 10/10)
Gov. Reg. No. 163/2002 Coll.
§ 5, 5a, 7
TN 10_10_01_a
TN 10_10_01_b
ČSN EN 12236
ČSN EN 15727
1.10.7* Wall mounted switchboards, flush- and
surface- mounted
b) subject to fire and smoke resistance
requirements
(product group 10/14)
Gov. Reg. No. 163/2002 Coll.
§ 5, 5a
TN 10_14_01_b
The Appendix is an integral part of
Certificate of Accreditation No. 689/2020 of 12/11/2020
Accredited entity according to ČSN EN ISO/IEC 17065:2013:
PAVUS, a.s. Product Certification Body
Prosecká 412/74, 190 00 Praha 9 - Prosek
Page 13 of 27 11_01-P508_V-20130510
Ordinal number
1)
Product/Product group name Conformity assessment
procedure/module
Basic requirements:
Product specifications/
characteristics/ technical
standards 2)
1.10.8* Systems for fire protection of cable tray
systems and cable ladder systems
(product group 10/16)
Gov. Reg. No. 163/2002 Coll.
§ 5, 5a
TN 10_16_01
TN 10_16_02
1.10.9* Cable tray systems and cable ladder
systems preserving functionality in the case
of fire
(product group 10/17)
Gov. Reg. No. 163/2002 Coll.
§ 5, 5a
TN 10_17_01
ČSN EN 61537 ed. 2
1.11* Construction products for interior and exterior finishes of walls, ceilings and
floors
1.11.1* Rigid flooring products:
components: paving elements, tiles,
profiles, mosaics, parquets, panel or grate
covers, grill flooring, solid laminated
floorings, wood based products, pouring
and screed materials
bearing systems marketed as assemblies:
access ramps, double floors for indoor use
including closed spaces of public transport
subject to reaction to fire regulations with
the prescribed level
A1FL1, A2FL
1, BFL1, CFL
1
A1FL2, A2FL
2, BFL2, CFL
2, DFL, EFL
(A1FL to EFL)3, FFL
(product group 11/1)
Gov. Reg. No. 163/2002 Coll.
§ 5, 5a, 7
TN 11_01_13
TN 11_01_16
ČSN EN 13226
ČSN EN 13488
1.11.2* Panels, boards, tiles and sections, facing
tiles, suspended ceilings, suspended
frames, coverings in roll form and shingles
a) for uses subject to requirements for fire
safety of buildings, including surface
spread of fire and dripping of materials
from ceilings or safety and hygiene in use,
b) for uses subject to requirements for
thermal or sound insulation
c) for uses subject to reaction to fire
regulations with the prescribed level
A11, A21, B1, C1
A12, A22, B2, C2, D, E
(A1 to E) 3, F
(product group 11/5)
Gov. Reg. No. 163/2002 Coll.
§ 5, 5a, 7
TN 11_05_01_a
TN 11_05_01_b
TN 11_05_01_c
TN 11_05_02_a
TN 11_05_02_b
TN 11_05_02_c
ČSN EN 477
ČSN EN 1013+A1
ČSN EN ISO 7823-1
ČSN EN ISO 7823-2
ČSN EN ISO 7823-3
ČSN EN ISO 11963
ČSN EN ISO 12017
ČSN EN ISO 14632
ČSN EN 14915+A1
ČSN EN ISO 15013
ČSN EN 15102
ČSN 64 0011
ČSN 64 3211
ČSN 64 3213
ČSN 64 4002
ČSN 73 1601
1.11.3* Plasterboards, plasters and ceiling elements
with thin laminations, fibre-reinforced
gypsum panels and composite panels
(laminates) including relevant ancillary
products
a) in fire walls, partitions, ceilings (or
linings thereof) subject to reaction to fire
requirements with the prescribed level
A11, A21, B1, C1
A12, A22, B2, C2, D, E
(A1 to E)3, F
Gov. Reg. No. 163/2002 Coll.
§ 5, 5a, 7
TN 11_06_01_a_b
ČSN EN 14353
The Appendix is an integral part of
Certificate of Accreditation No. 689/2020 of 12/11/2020
Accredited entity according to ČSN EN ISO/IEC 17065:2013:
PAVUS, a.s. Product Certification Body
Prosecká 412/74, 190 00 Praha 9 - Prosek
Page 14 of 27 11_01-P508_V-20130510
Ordinal number
1)
Product/Product group name Conformity assessment
procedure/module
Basic requirements:
Product specifications/
characteristics/ technical
standards 2)
b) in walls, partitions, ceilings intended for
increasing fire resistance of structural
elements and /or for the separation of fire
sections
(product group 11/6)
2. Construction products acc. to Regulation (EU) No. 305/2011
2.1* Precast normal/ lightweight concrete / autoclaved aerated concrete products
2.1.1* Precast normal/ lightweight concrete /
autoclaved aerated concrete products (1/1):
Precast concrete products made of
common/lightweight concrete and
autoclaved aerated concrete – for structural
use
(according to Annex III of Commission
Decision No. 1999/94/EC, as amended by
Commission Decision 2012/202/EU)
Regulation No. 305/2011
System 2+
ČSN EN 1168+A3
ČSN EN 12737+A1
ČSN EN 12794+A1
ČSN EN 13224
ČSN EN 13225
ČSN EN 13747+A2
ČSN EN 13963
ČSN EN 13978-1
ČSN EN 14843
ČSN EN 14991
ČSN EN 14992+A1
ČSN EN 15037-1
ČSN EN 15037-2+A1
ČSN EN 15037-3+A1
ČSN EN 15435
ČSN EN 15498
2.1.2* Beam/block floor units and elements
containing organic materials (2/2)
for uses subject to reaction to fire
regulations
(according to Annex III of Commission
Decision No. 1999/94/EC, as amended by
Commission Decision 2012/202/EU)
Regulation No. 305/2011
System 1, 3
ČSN EN 15037-4+A1
ČSN EN 15037-5
2.2* Doors, windows, shutters, gates and related finish hardware
2.2.1* Doors, windows, shutters, gates and related
finish hardware (1/1)
Doors and gates (with and without related
hardware), Windows (with and without
related hardware), hardware for doors,
gates and windows
for the separation of fire/smoke sections
and for emergency routes
(according to Annex III of Commission
Decision No. 1999/93/EC, as amended by
Commission Decision 2011/246/EU)
Regulation No. 305/2011
System 1
ČSN EN 179
ČSN EN 1125
ČSN EN 1154
ČSN EN 1155
ČSN EN 1158
ČSN EN 1935
ČSN EN 12209
ČSN EN 13241+A2
ČSN EN 13659+A1
ČSN EN 14351-1+A2
ČSN EN 16034
EAD 020001-01-0405
EAD 020011-00-0405
EAD 020029-00-1102
2.2.2* Doors, windows, shutters, gates and related
finish hardware (1/1) Doors and gates (with
and without related hardware)
for declared specific uses and/or uses
subject to other specific requirements, in
particular noise, energy, tightness and
safety-in-use (i.e. NOT for the separation
of fire/smoke sections and NOT for
emergency routes)
(according to Annex III of Commission
Regulation No. 305/2011
System 3
ČSN EN 13241+A2
ČSN EN 14351-1+A2
The Appendix is an integral part of
Certificate of Accreditation No. 689/2020 of 12/11/2020
Accredited entity according to ČSN EN ISO/IEC 17065:2013:
PAVUS, a.s. Product Certification Body
Prosecká 412/74, 190 00 Praha 9 - Prosek
Page 15 of 27 11_01-P508_V-20130510
Ordinal number
1)
Product/Product group name Conformity assessment
procedure/module
Basic requirements:
Product specifications/
characteristics/ technical
standards 2)
Decision No. 1999/93/EC, as amended by
Commission Decision 2011/246/EU)
2.2.3* Windows (with and without related
hardware) for any other uses
(according to Annex III of Commission
Decision No. 1999/93/EC, as amended by
Commission Decision 2011/246/EU)
Regulation No. 305/2011
System 3
ČSN EN 13241+A2
ČSN EN 14351-1+A2
2.3* Membranes, including liquid applied and kits (for water and/or vapour control)
2.3.1* Waterproofing (1/3)
Damp proof courses, roof underlays, water
vapour control layers, damp proofing
sheets, roof sheets
for use in buildings
(according to Annex III of Commission
Decision No. 1999/90/EC, as amended by
Commission Decision 2001/596/EC)
Regulation No. 305/2011
System 2+ ČSN EN 13707+A2
ČSN EN 13967 ed.2
ČSN EN 13969
ČSN EN 14967
2.3.2* Waterproofing (2/3)
Flexible sheets for waterproofing,
waterproofing layers, roof underlays, roof
flexible sheets for waterproofing, water
vapour control layer
for uses subject to reaction to fire
regulations
(according to Annex III of Commission
Decision No. 1999/90/EC, as amended by
Commission Decision 2001/596/EC)
Regulation No. 305/2011
System 1, 3 ČSN EN 13707+A2
ČSN EN 13859-1
ČSN EN 13859-2
ČSN EN 13956
ČSN EN 13967 ed.2
ČSN EN 13970
ČSN EN 13984
ČSN EN 14909 ed.2
ČSN EN 14967
2.3.3* Waterproofing (3/3)
Roof underlays, roof sheets
for uses subject to external fire
performance regulations
(according to Annex III of Commission
Decision No. 1999/90/EC, as amended by
Commission Decision 2001/596/EC)
Regulation No. 305/2011
System 3 ČSN EN 13707+A2
ČSN EN 13956
2.4* Thermal insulation products. Composite insulation kits or systems
2.4.1* Thermal insulating products (1/2)
Thermal insulation products (factory-made
products and products intended to be
formed in-situ)
For any other uses
Thermal insulating products (21337/2)
Thermal insulation products (factory-made
products and products intended to be
formed in-situ)
for uses subject to reaction to fire
regulations
(according to Annex III of Commission
Decision No. 1999/91/EC, as amended by
Commission Decision 2001/596/EC)
Regulation No. 305/2011
System 1, 3 ČSN EN 13162+A1
ČSN EN 13163+A1
ČSN EN 13164+A1
ČSN EN 13165+A2
ČSN EN 13166+A2
ČSN EN 13168+A1
ČSN EN 13169+A1
ČSN EN 13170+A1
ČSN EN 13171+A1
ČSN EN 14303+A1
ČSN EN 14307+A1
ČSN EN 14308+A1
ČSN EN 14309+A1
ČSN EN 14933
ČSN EN 14934
The Appendix is an integral part of
Certificate of Accreditation No. 689/2020 of 12/11/2020
Accredited entity according to ČSN EN ISO/IEC 17065:2013:
PAVUS, a.s. Product Certification Body
Prosecká 412/74, 190 00 Praha 9 - Prosek
Page 16 of 27 11_01-P508_V-20130510
Ordinal number
1)
Product/Product group name Conformity assessment
procedure/module
Basic requirements:
Product specifications/
characteristics/ technical
standards 2)
2.5* Chimneys, flues and specific products
2.5.1* Chimneys, flues and specific products (1/1)
Prefabricated chimneys (floor height
elements), flue liners (elements or blocks),
multilayer chimneys (elements or blocks),
single-layer chimney blocks, parts of free-
standing chimneys and adjacent chimneys
Prefabricated chimneys (storey height
elements), flue liners (elements or blocks),
multi-shell chimney (elements or blocks),
single walled chimneys blocks, kits of free
standing chimneys and attached chimneys,
chimney terminals for uses subject to
reaction to fire regulations
(according to Annex III of Commission
Decision No. 95/467/EC, as amended by
Commission Decision 2001/596/EC,
2002/592/EC, and 2010/679/EU)
Regulation No. 305/2011
System 1, 2+, 3 ČSN EN 1457-1
ČSN EN 1457-2
ČSN EN 1806
ČSN EN 1856-1
ČSN EN 1856-2
ČSN EN 1857
ČSN EN 1858+A1
ČSN EN 12446 ed.2
ČSN EN 13063-1+A1
ČSN EN 13063-2+A1
ČSN EN 13063-3
ČSN EN 13069
ČSN EN 13084-5
ČSN EN 13084-7
ČSN EN 13502
ČSN EN 14471+A1
ČSN EN 14989-1
ČSN EN 14989-2
2.6* Gypsum products
2.6.1* Gypsum products (1/4)
Plasterboards and ceiling elements with
thin laminations, fibrous gypsum boards,
fibrous gypsum plaster casts, and
composite panels (laminates), in which the
incorporated material is placed on a face
susceptible to be exposed to fire, including
relevant ancillary products, for uses in
walls, partitions or ceilings (or lining
thereof)
(according to Annex III of Commission
Decision No. 95/467/EC, as amended by
Commission Decision 2001/596/EC,
2002/592/EC, and 2010/679/EU)
Regulation No. 305/2011
System 1, 3 ČSN EN 13658-1
ČSN EN 13658-2
ČSN EN 13693+A1
ČSN EN 13815
ČSN EN 13950 ed.2
ČSN EN 13963
ČSN EN 14190 ed. 2
ČSN EN 14209 ed. 2
ČSN EN 14353+A1
ČSN EN 14496
ČSN EN 14566+A1
EAD 070001-01-0504
2.6.2* Gypsum products (2/4)
Plasterboards, blocks, ceiling elements and
gypsum plasters, fibrous gypsum plasters
casts, including relevant ancillary products
for uses in walls, partitions or ceilings, as
relevant, intended for fire protection of
structural elements and/or fire
compartmentation in buildings
(according to Annex III of Commission
Decision No. 95/467/EC, as amended by
Commission Decision 2001/596/EC,
2002/592/EC, and 2010/679/EU)
Regulation No. 305/2011
System 3 ČSN EN 12859
ČSN EN 12860
ČSN EN 13279-1
ČSN EN 14195
ČSN EN 14246
ČSN EN 520+A1
2.6.3* Gypsum products (3/4)
Plasterboards, including relevant ancillary
products for stiffening timber-framed
windload bearing walls or timber roof
struss structures (3/4)
Regulation No. 305/2011
System 3 ČSN EN 14190 ed. 2
ČSN EN 15283-1+ A1
ČSN EN 15283-2+A1
The Appendix is an integral part of
Certificate of Accreditation No. 689/2020 of 12/11/2020
Accredited entity according to ČSN EN ISO/IEC 17065:2013:
PAVUS, a.s. Product Certification Body
Prosecká 412/74, 190 00 Praha 9 - Prosek
Page 17 of 27 11_01-P508_V-20130510
Ordinal number
1)
Product/Product group name Conformity assessment
procedure/module
Basic requirements:
Product specifications/
characteristics/ technical
standards 2)
(according to Annex III of Commission
Decision No. 95/467/EC, as amended by
Commission Decision 2001/596/EC,
2002/592/EC, and 2010/679/EU)
2.7* Geotextiles, geomembranes and related products
2.7.1* Geosynthetics (membranes and textiles),
geocomposites, geogrids, geomembranes
and geonets used for separation, protection,
drainage, filtration, or soil reinforcement
- for all essential characteristics except for
reaction to fire
- for reaction of fire of products for which a
clearly identifiable stage in their production
process results in an improvement of their
reaction to fire performance (e.g. by adding
fire retardants or limiting of organic
materials)
- for reaction of fire of products not listed
above
(according to Annex II of Commission
Decision 2015/1958)
Regulation No. 305/2011
System 1, 2+, 3
ČSN EN 13251
ČSN EN 13251+A1
ČSN EN 13255
ČSN EN 13256
ČSN EN 13491
2.8* Curtain walling/sheathing/structural sealed glazing
2.8.1* Curtain walling (1/1)
Curtain walling systems
- As external walls subject to reaction to
fire requirements
- As external walls not subject to reaction
to fire requirements
(according to Annex III of Commission
Decision No. 96/580/EC, as amended by
Commission Decision 2001/596/EC)
Regulation No. 305/2011
System 1, 3
ČSN EN 13830
2.9* Fixed fire-extinguishing systems (products for fire alarm/detection, fixed
products for fire extinguishing, fire and smoke control, and explosion
suppression)
2.9.1* Products for fire alarm/detection, fixed
extinguishing, fire and smoke control, and
explosion suppression (1/1) 2 for fire safety
- First aid hose systems
- Dry and wet fire-fighting hydrant systems
- Sprinkler and water spray systems-kits
- Smoke and heat exhaust ventilation
systems-kits
- Control and indicating devices
- Manual call points
- Multiple controls
- Fire hydrants
- Water flow detectors/switches
- Nozzles/sprinklers/outlets
- Wet alarm valve assemblies
- Dry alarm valve assemblies
- Deluge alarm valve assemblies
- Multiple controls
- High pressure container valve assemblies
and their actuators
- Selector valves and their actuators
Regulation No. 305/2011
System 1
ČSN EN 671-1 ed. 2
ČSN EN 671-2 ed. 2
ČSN EN 12094-1
ČSN EN 12094-2
ČSN EN 12094-3
ČSN EN 12094-4
ČSN EN 12094-5
ČSN EN 12094-6
ČSN EN 12094-7
ČSN EN 12094-8
ČSN EN 12094-9
ČSN EN 12094-10
ČSN EN 12094-11
ČSN EN 12094-12
ČSN EN 12094-13
ČSN EN 12101-1
ČSN EN 12101-2
ČSN EN 12101-3 ed. 2
ČSN EN 12101-6
ČSN EN 12101-7
ČSN EN 12101-8
The Appendix is an integral part of
Certificate of Accreditation No. 689/2020 of 12/11/2020
Accredited entity according to ČSN EN ISO/IEC 17065:2013:
PAVUS, a.s. Product Certification Body
Prosecká 412/74, 190 00 Praha 9 - Prosek
Page 18 of 27 11_01-P508_V-20130510
Ordinal number
1)
Product/Product group name Conformity assessment
procedure/module
Basic requirements:
Product specifications/
characteristics/ technical
standards 2)
- Non-electrical disable devices
- Flexible connectors
- Check valves and non-return valves
- Smoke curtains
- Dampers
- Ducts
- Powered ventilators
(according to Annex II of Commission
Decision No. 96/577/EC, as amended by
Commission Decision 2002/592/EC)
ČSN EN 12101-10
ČSN EN 12259-1+A1
ČSN EN 12259-2
ČSN EN 12259-3
ČSN EN 12259-4
ČSN EN 12259-5
ČSN EN 14339
ČSN EN 14384
ČSN EN 15650
2.10* Products and elements of structural wood and accessories
2.10.1* Structural timber products (1/3)
Solid structural timber products
Elements
Bridge elements, truss elements,
sleepers, floor elements,
wall elements, roof elements such as
beams, arches, joists,
rafters, columns, poles, piles
Assemblies
Truss beams, floors, walls,
roofs, frames
for bridges, railways and civil engineering
constructions
Timber poles for overhead lines
(according to Annex III of Commission
Decision No. 97/176/EC, as amended by
Commission Decision 2001/596/EC)
Regulation No. 305/2011
System 1, 2+
ČSN EN 14081-1+A1
ČSN EN 14250
EAD 130002-00-0304
EAD 130005-00-0304
EAD 130011-00-0304
EAD 130012-00-0304
EAD 130013-00-0304
EAD 130022-00-0304
EAD 130087-00-0204
2.10.2* Structural timber products (2/3)
Structural glued laminated products and
other glued timber products
Elements
Bridge elements, truss elements,
floor elements, wall elements,
roof elements such as beams,
arches, joists, rafters,
columns, poles, piles.
Assemblies
Truss beams, floors, walls,
roofs, frames
for bridges and civil engineering structures
(according to Annex III of Commission
Decision No. 97/176/EC, as amended by
Commission Decision 2001/596/EC)
Regulation No. 305/2011
System 1
ČSN EN 14080
ČSN EN 14374
EAD 130010-01-0304
2.10.3* Structural timber products (3/3)
Fasteners for structural timber products
- connectors for timber, split ring
connectors, cylindrical steel and wood
dowels, wood screws, threaded bolts, wood
nails.
(according to Annex III of Commission
Decision No. 97/176/EC, as amended by
Commission Decision 2001/596/EC)
Regulation No. 305/2011
System 3
ČSN EN 14592+A1
2.10.4* Timber frame and log prefabricated
building kits (acc. to Annex II CD
1999/455/EC)
Regulation No. 305/2011
System 1
EAD 340308-00-0203
ETAG 007
The Appendix is an integral part of
Certificate of Accreditation No. 689/2020 of 12/11/2020
Accredited entity according to ČSN EN ISO/IEC 17065:2013:
PAVUS, a.s. Product Certification Body
Prosecká 412/74, 190 00 Praha 9 - Prosek
Page 19 of 27 11_01-P508_V-20130510
Ordinal number
1)
Product/Product group name Conformity assessment
procedure/module
Basic requirements:
Product specifications/
characteristics/ technical
standards 2)
2.11* Wood based panels and elements
2.11.1* Wood-based panels (1/2), (2/2)
Wood based panels without surface
treatment, with surface treatment
and veneered or laminated
for indoor or outdoor bearing
structures
(according to Annex III of Commission
Decision No. 97/462/EC, as amended by
Commission Decision 2001/596/EC)
Regulation No. 305/2011
System 1, 2+, 3
ČSN EN 13986+A1
2.12* Masonry and related products. Masonry units, mortars and ancillaries
2.12.1*
Masonry and related products (1/3)
- Category I masonry units in walls,
columns and partitions
(according to Annex 3 of Commission
Decision No. 97/740/EC, as amended by
Commission Decision 2001/596/EC)
Regulation No. 305/2011
System 2+
ČSN EN 771-1+A1
ČSN EN 771-2+A1
ČSN EN 771-3+A1
ČSN EN 771-4+A1
ČSN EN 771-5+A1
ČSN EN 771-6+A1
ČSN EN 15824 ed. 2
2.12.2* Masonry and related products (2/3)
- Ties, tension straps, joist hangers,
brackets, support angles, reinforcement
of sheet joints and lintels in walls and
partitions
(according to Annex 3 of Commission
Decision No. 97/740/EC, as amended by
Commission Decision 2001/596/EC)
Regulation No. 305/2011
System 3
ČSN EN 845-1+A1
ČSN EN 845-2+A1
ČSN EN 845-3+A1
2.12.3* Masonry and related products (3/3)
Masonry units incorporating thermal
insulating materials placed on a face
susceptible to be exposed to fire (in walls
and partitions subject to reaction to fire
regulations)
(according to Annex III of Commission
Decision No. 97/740/EC, as amended by
Commission Decision 2001/596/EC)
Regulation No. 305/2011
System 1, 3
ČSN EN 998-1 ed. 3
ČSN EN 998-2 ed. 3
ČSN EN 15824 ed. 2
2.13* Floorings
2.13.1* Product group flooring and outdoor
surfaces (2/2)
Products for solid floors
A) Components
Paving units, tiles, mosaics,
parquets, panel or grate covers, grill
flooring, solid laminated
floorings, wood based products
B) Bearing systems marketed as assemblies
Access ramps, double floors
for internal uses including enclosed
public transport premises with a prescribed
level of reaction to fire
(according to Annex III of Commission
Decision 97/808/EC, as amended by
Commission Decision 1999/453,
Commission Decision 2001/596 and
Commission Decision 2006/190 EC)
Regulation No. 305/2011
System 1, 3
ČSN EN 12057
ČSN EN 12058
ČSN EN 13813
ČSN EN 14041
ČSN EN 14342
ČSN EN 14411 ed. 2
2.13.2* Resilient and textile floorings
Homogeneous and heterogeneous flexible
floor coverings supplied either in tile,
Regulation No. 305/2011
System 1, 3
ČSN EN 14041
ČSN EN 14904
The Appendix is an integral part of
Certificate of Accreditation No. 689/2020 of 12/11/2020
Accredited entity according to ČSN EN ISO/IEC 17065:2013:
PAVUS, a.s. Product Certification Body
Prosecká 412/74, 190 00 Praha 9 - Prosek
Page 20 of 27 11_01-P508_V-20130510
Ordinal number
1)
Product/Product group name Conformity assessment
procedure/module
Basic requirements:
Product specifications/
characteristics/ technical
standards 2)
sheet or roll form (textile floor
covering including tiles; plastic and rubber
sheets (aminoplastic thermosetting
floorings); linoleum and cork; anti-static
sheet; floor loose laid tiles; resilient
laminated floorings)
for internal uses with a prescribed level of
reaction to fire
(according to Annex III of Commission
Decision 97/808/EC, as amended by
Commission Decision 1999/453,
Commission Decision 2001/596 and
Commission Decision 2006/190 EC)
2.13.3* Floor screed materials for internal uses
with a prescribed level of reaction to fire
(according to Annex III of Commission
Decision 97/808/EC, as amended by
Commission Decision 1999/453,
Commission Decision 2001/596 and
Commission Decision 2006/190 EC)
Regulation No. 305/2011
System 1, 3
ČSN EN 13813
ČSN EN 13454-1
2.14* Structural metallic products and ancillaries
2.14.1* Structural metal products and accessories
(2/4)
Structural metal construction products:
- finished metallic products (trusses,
girders, columns, stairs, ground piles,
bearing piles and sheet piling, cut to size
sections designed for certain applications,
and rails and sleepers, gabions);
- finished metal framing for suspended
ceilings with a prescribed level of reaction
to fire;
unprotected or protected against corrosion
by coating, welded or not, for uses in
work's frames
(according to Annex III of Commission
Decision No. 98/214/EC, as amended by
Commission Decision 2001/596/EC)
Regulation No. 305/2011
System 2+
ČSN EN 1091-1+A1
2.15* Indoor and outdoor coating of walls and ceilings, internal partition kits
2.15.1* Internal and external wall and ceiling
finishes (1/5)
Panels,
intended to be used as internal or external
finishes, as completed elements, for fire
protection of walls and ceilings
suspended ceilings (kits) intended to be
used as internal or external finishes for fire
protection of walls and ceilings
(according to Annex III of Commission
Decision No. 98/437/EC, as amended by
Commission Decision 2001/596/EC)
Regulation No. 305/2011
System 3
ČSN EN 13964 ed.2
ČSN EN 14509 ed.2
2.15.2* Internal and external wall and ceiling
finishes (2/5)
Suspended ceilings (kits)
as internal or external finish in walls and
ceilings subject to safety in use
requirements
Regulation No. 305/2011
System 3
ČSN EN 492 ed. 2
ČSN EN 12057
ČSN EN 13964 ed.2
The Appendix is an integral part of
Certificate of Accreditation No. 689/2020 of 12/11/2020
Accredited entity according to ČSN EN ISO/IEC 17065:2013:
PAVUS, a.s. Product Certification Body
Prosecká 412/74, 190 00 Praha 9 - Prosek
Page 21 of 27 11_01-P508_V-20130510
Ordinal number
1)
Product/Product group name Conformity assessment
procedure/module
Basic requirements:
Product specifications/
characteristics/ technical
standards 2)
Tiles. Panels
in internal or external suspended ceilings to
which safety in use requirements apply
(according to Annex III of Commission
Decision No. 98/437/EC, as amended by
Commission Decision 2001/596/EC)
2.15.3* Internal and external wall and ceiling
finishes (3/5)
Wall coverings in roll form, linings,
shingles, boards, suspended ceilings (kits),
tiles, facing tiles, panels, featured profiles,
suspended frames,
- as internal or external finishes in walls
and ceilings or intended to support internal
or external finishes in walls and ceilings
and suspended ceilings, subject to reaction
to fire regulations
(according to Annex III of Commission
Decision No. 98/437/EC, as amended by
Commission Decision 2001/596/EC)
Regulation No. 305/2011
System 1, 3
ČSN EN 494+A1
ČSN EN 1469 ed. 2
ČSN EN 12467 ed. 2
ČSN EN 14716
ČSN EN 14915
ČSN EN 15102+A1
EAD 210024-00-0504
2.15.4* Internal and external wall and ceiling
finishes (4/5)
Internal and external wall and ceiling
finishes (4/5)
Suspended ceilings (kits), tiles, shingles,
facing tiles, boards, panels
as internal or external finishes in walls and
ceilings subject to regulations on dangerous
substances
(according to Annex III of Commission
Decision No. 98/437/EC, as amended by
Commission Decision 2001/596/EC)
Regulation No. 305/2011
System 3
ČSN EN 494+A1
ČSN EN 14915
ČSN EN 15285
EAD 090062-00-0404
2.15.5* Kits for exterior wall claddings (1/2)
Kits for exterior wall claddings
- for external walls, or external finishes of
walls
Kits for exterior wall claddings (2/2)
- for uses subject to reaction to fire
regulations
(according to Annex II of Commission
Decision 2003/640/EC)
Regulation No. 305/2011
System 1, 2+, 3
EAD 090001-00-0404
EAD 090019-00-0404
EAD 090034-00-0404
EAD 090062-00-0404
EAD 210046-00-1201
2.16* Roof coverings, roof lights, roof windows and ancillary products, roof kits
2.16.1* Roof coverings, roof lights, roof windows
(1/6)
Flat and profiled sheets, roofing tiles,
slates, stones and shingles, factory-bonded
composite or sandwich panels, rooflights,
roof windows for uses subject to fire
resistance regulations (e.g. for fire
compartmentation)
(according to Annex III of Commission
Decision No. 98/436/EC, as amended by
Commission Decision 2001/596/EC)
Regulation No. 305/2011
System 3
ČSN EN 492 ed. 2
ČSN EN 544 ed. 2
ČSN EN 1304
ČSN EN 1873
ČSN EN 12326-1 ed. 2
ČSN EN 14509 ed.2
ČSN EN 14782
ČSN EN 14783
ČSN EN 14963
EAD 220013-01-0401
EAD 220021-00-0402
2.16.2* Roof coverings, roof lights, roof windows
and ancillary products (2/6)
Flat and profiled sheets, roofing tiles,
slates, stones and shingles, factory-bonded
Regulation No. 305/2011
System 1, 3
ČSN EN 490 ed. 2
ČSN EN 492 ed. 2
ČSN EN 494+A1
ČSN EN 534+A1
The Appendix is an integral part of
Certificate of Accreditation No. 689/2020 of 12/11/2020
Accredited entity according to ČSN EN ISO/IEC 17065:2013:
PAVUS, a.s. Product Certification Body
Prosecká 412/74, 190 00 Praha 9 - Prosek
Page 22 of 27 11_01-P508_V-20130510
Ordinal number
1)
Product/Product group name Conformity assessment
procedure/module
Basic requirements:
Product specifications/
characteristics/ technical
standards 2)
composite or sandwich panels, rooflights,
roof windows, fascias and soffit boards for
uses subject to reaction to fire regulations
(according to Annex III of Commission
Decision No. 98/436/EC, as amended by
Commission Decision 2001/596/EC)
ČSN EN 544 ed. 2
ČSN EN 1013+A1
ČSN EN 1304
ČSN EN 1873
ČSN EN 12326-1 ed. 2
ČSN EN 14351-1+A2
ČSN EN 14509 ed.2
ČSN EN 14782
ČSN EN 14783
ČSN EN 14963
ČSN EN 14964
ČSN EN 16153+A1
EAD 220010-00-0402
2.16.3* Roof coverings, roof lights, roof windows
and ancillary products (3/6)
Flat and profiled sheets
Roofing tiles, slates, stones and shingles
Systems for roof access; walkways and
steps
for uses subject to external fire
performance regulations
(according to Annex III of Commission
Decision No. 98/436/EC, as amended by
Commission Decision 2001/596/EC)
Regulation No. 305/2011
System 3
ČSN EN 490 ed. 2
ČSN EN 492 ed. 2
ČSN EN 494+A1
ČSN EN 516
ČSN EN 534+A1
ČSN EN 544 ed. 2
ČSN EN 1013+A1
ČSN EN 1304
ČSN EN 1873
ČSN EN 12326-1 ed. 2
ČSN EN 14351-1+A2
ČSN EN 14509 ed.2
ČSN EN 14782
ČSN EN 14783
ČSN EN 14963
ČSN EN 16153+A1
2.16.4* Roof coverings, roof lights, roof windows
and ancillary products (4/6)
Flat and profiled sheets, factory-bonded
composite or sandwich panels, rooflights,
roof windows
for uses contributing to stiffening the roof
structure (4/6)
(according to Annex III of Commission
Decision No. 98/436/EC, as amended by
Commission Decision 2001/596/EC)
Regulation No. 305/2011
System 3
ČSN EN 494+A1
ČSN EN 1873
ČSN EN 14963
2.16.5* Roof coverings, roof lights, roof windows
and ancillary products (5/6)
All roof coverings, rooflights, roof
windows and ancillary products for uses
subject to regulations on dangerous
substances
(according to Annex III of Commission
Decision No. 98/436/EC, as amended by
Commission Decision 2001/596/EC)
Regulation No. 305/2011
System 3
ČSN EN 492 ed. 2
ČSN EN 1013+A1
ČSN EN 1873
ČSN EN 14509 ed.2
ČSN EN 14963
2.16.6* Roof coverings, roof lights, roof windows
and ancillary products (6/6)
Roof access systems, walkways and
footholds, roof safety hooks and
anchorages, mastic asphalt roofing,
rooflights, roof windows for uses other
than those specified in families (1/6), (2/6),
(3/6), (4/6), (5/6)
(according to Annex III of Commission
Decision No. 98/436/EC, as amended by
Regulation No. 305/2011
System 3
ČSN EN 516
ČSN EN 517
ČSN EN 1873
ČSN EN 12951
ČSN EN 14351-1+A2
ČSN EN 14963
The Appendix is an integral part of
Certificate of Accreditation No. 689/2020 of 12/11/2020
Accredited entity according to ČSN EN ISO/IEC 17065:2013:
PAVUS, a.s. Product Certification Body
Prosecká 412/74, 190 00 Praha 9 - Prosek
Page 23 of 27 11_01-P508_V-20130510
Ordinal number
1)
Product/Product group name Conformity assessment
procedure/module
Basic requirements:
Product specifications/
characteristics/ technical
standards 2)
Commission Decision 2001/596/EC)
2.17* Road construction products
2.17.1* Road construction products (2/2)
Bituminous mixtures, surface treatment
for uses subject to reaction to fire
regulations
(according to Annex III of Commission
Decision No. 98/601/EC, as amended by
Commission Decision 2001/596/EC)
Regulation No. 305/2011
System 1, 3
ČSN EN 14023
ČSN EN 14695
2.18* Construction adhesives
2.18.1* Construction adhesives
for use in buildings and other civil
engineering works (1/2)
- for uses subject to reaction to fire
regulations (2/2)
Adhesives
- for internal and external use in buildings
and other civil engineering works (1/2)
- for uses subject to reaction to fire
regulations (2/2)
(according to Annex III of Commission
Decision No. 1999/470/EC, as amended by
Commission Decision 2001/596/EC)
Regulation No. 305/2011
System 3
ČSN EN 12004+A1
ČSN EN 15274
ČSN EN 15275
2.19* Products related to concrete, mortar and grout
2.19.1* Products related to concrete, mortar and
grout (1/2)
Admixtures and additions (type I) for
concrete, mortar and grout
(according to Annex III of Commission
Decision No. 1999/469/EC, as amended by
Commission Decision 2001/569/EC)
Regulation No. 305/2011 System 2+
ČSN EN 934-2+A1
ČSN EN 934-3+A1
ČSN EN 934-4
ČSN EN 934-5
EAD 260017-00-0301
2.19.2* Concrete protection and repair products
- for other uses in buildings and other civil
engineering works (1/2)
Products related to concrete, mortar and
grout (2/2)
Concrete protection and repair products
for uses subject to reaction to fire
regulations (2/2)
(according to Annex III of Commission
Decision No. 1999/469/EC, as amended by
Commission Decision 2001/569/EC)
Regulation No. 305/2011 System 1, 2+, 3
ČSN EN 1504-2
ČSN EN 1504-3
ČSN EN 1504-4
ČSN EN 1504-5
ČSN EN 1504-6
ČSN EN 1504-7
2.20* Tubes, tanks and ancillaries, which are not in contact with water intended for
human consumption
2.20.1* Piping, tanks and ancillaries, which are not
in contact with water intended for human
consumption (1/5)
- tubes
- tanks
- valves and taps
- valves, adhesives, sealing for
fittings and gaskets,
in installations for transport/distribution/
storage of gas/fuel supplying
heating/cooling systems of buildings
from the external storage reservoir or the
Regulation No. 305/2011 System 3
ČSN EN 682
ČSN EN 13341+A1
ČSN EN 14800
ČSN EN 15069
The Appendix is an integral part of
Certificate of Accreditation No. 689/2020 of 12/11/2020
Accredited entity according to ČSN EN ISO/IEC 17065:2013:
PAVUS, a.s. Product Certification Body
Prosecká 412/74, 190 00 Praha 9 - Prosek
Page 24 of 27 11_01-P508_V-20130510
Ordinal number
1)
Product/Product group name Conformity assessment
procedure/module
Basic requirements:
Product specifications/
characteristics/ technical
standards 2)
last pressure reduction unit
of the network to the inlet of the
heating/cooling
systems of the building
(according to Annex III of Commission
Decision No. 1999/472/EC, as amended by
Commission Decision 2001/596/EC)
2.21* Joint sealants
2.21.1* Sealants
- for facade elements; for glazing, for
pedestrian walkways and for sanitary joints
for use in building construction (1/2)
- for non-structural use in joints in
buildings and pedestrian walkways, for
uses subject to reaction to fire regulations
(2/2)
(according to Annex II of Commission
Decision 2011/19/EC)
Regulation No. 305/2011 System 3
ČSN EN 15651-1 ed. 2
2.22* Building kits, units, and prefabricated elements
2.22.1* Metal frame building kits, concrete frame
building kits, prefabricated building units,
cold storage room kits (for use in building
works)
(according to Annex II of Commission
Decision 2003/728/EC)
Regulation No. 305/2011 System 1
ETAG 023
EAD 340037-00-0204
2.23* Products for fire stopping, fire sealing and fire protection and retardation
products
2.23.1* Fire stopping, fire sealing and fire
protection (1/2)
Fire stopping and fire sealing products
Fire protective products (including
protective coatings)
for fire compartmentation and/or
fire protection or fire performance
Fire stopping, fire sealing and fire
protection products (2/2)
Fire stopping and fire sealing products
Fire protective products (including
protective coatings)
for uses subject to reaction to fire
regulations
(according to Annex II of Commission
Decision No. 1999/454/EC, as amended by
Commission Decision 2001/596/EC)
Regulation No. 305/2011 System 1, 3
EAD 350003-00-1109
EAD 350005-00-1104
EAD 350022-01-1107
EAD 350134-00-1104
EAD 350140-00-1106
EAD 350141-00-1106
EAD 350142-00-1106
EAD 350402-00-1106
EAD 350454-00-1104
EAD 350865-00-1106
ETAG 026-4
ETAG 026-5
ETAG 028
3* Selected products acc. to GR No. 173/1997 Coll. 3.1* Extinguishing agents (excluding water
without additives)
(area code 2 according to the Government
Regulation No. 173/1997 Coll., Annex No.
2)
Gov. Reg. No. 173/1997 Coll.
§ 3
ČSN EN 615
ČSN EN 1568-1 ed. 2
ČSN EN 1568-2 ed. 2
ČSN EN 1568-3 ed. 2
ČSN EN 1568-4 ed. 2
ČSN EN ISO 5923
ISO 14520-1
ISO 14520-2
ISO 14520-5
ISO 14520-6
ISO 14520-8
The Appendix is an integral part of
Certificate of Accreditation No. 689/2020 of 12/11/2020
Accredited entity according to ČSN EN ISO/IEC 17065:2013:
PAVUS, a.s. Product Certification Body
Prosecká 412/74, 190 00 Praha 9 - Prosek
Page 25 of 27 11_01-P508_V-20130510
Ordinal number
1)
Product/Product group name Conformity assessment
procedure/module
Basic requirements:
Product specifications/
characteristics/ technical
standards 2)
ISO 14520-9
ISO 14520-10
ISO 14520-11
ISO 14520-12
ISO 14520-13
ISO 14520-14
ISO 14520-15
ČSN EN 15004-2
ČSN EN 15004-3
ČSN EN 15004-4
ČSN EN 15004-5
ČSN EN 15004-6
ČSN EN 15004-7
ČSN EN 15004-8
ČSN EN 15004-9
ČSN EN 15004-10
3.2* Fire-fighting hoses, branchpipes and valves
(area code 3, 4 according to the
Government Regulation No. 173/1997
Coll., Annex No. 2)
Gov. Reg. No. 173/1997 Coll.
§ 3
ČSN EN 3-7+A1
ČSN EN 3-8
ČSN EN 3-9
ČSN EN 3-10
ČSN EN 593
ČSN EN 694
ČSN EN 1028-1+A1
ČSN EN 1074-1
ČSN EN 1074-2
ČSN EN 1074-3
ČSN EN 1074-4
ČSN EN 1074-5
ČSN EN 1074-6
ČSN EN 1147
ČSN EN ISO 1403
ČSN EN 1866-1
ČSN EN 1866-2
ČSN EN 1866-3
ČSN EN 1869
ČSN EN 1947
ÖNORM F 2105
ČSN EN ISO 2398
ČSN EN ISO 3949
ČSN EN ISO 6224
ČSN EN 13731
ČSN EN 14466+A1
ČSN EN 14540
ČSN EN ISO 14557
ČSN EN 14710-1+A2
ČSN EN 14710-2+A2
ČSN EN 15182-1+A1
ČSN EN 15182-2+A1
ČSN EN 15182-3+A1
ČSN EN 15182-4+A1
ČSN EN 15767-1
ČSN EN 15767-2
ČSN EN 15767-3
ČSN 38 9403
ČSN 38 9420
ČSN 38 9424
ČSN 38 9426
ČSN 38 9427
The Appendix is an integral part of
Certificate of Accreditation No. 689/2020 of 12/11/2020
Accredited entity according to ČSN EN ISO/IEC 17065:2013:
PAVUS, a.s. Product Certification Body
Prosecká 412/74, 190 00 Praha 9 - Prosek
Page 26 of 27 11_01-P508_V-20130510
Ordinal number
1)
Product/Product group name Conformity assessment
procedure/module
Basic requirements:
Product specifications/
characteristics/ technical
standards 2)
ČSN 38 9441
ČSN 38 9445
ČSN 38 9481
ČSN 38 9490
ČSN 80 8711
1) Asterisk at the ordinal number identifies that within the scope of accreditation, the certification body is allowed to
include new/updated/revised technical specifications listed in the relevant conformity assessment procedure for the
assessment of conformity with basic requirements. The precondition is that the product area, regulations and
conformity assessment procedure must not change. 2) Updated list of standards/normative documents is available from the Certification Body from the Certification
Body Manager.
The Appendix is an integral part of
Certificate of Accreditation No. 689/2020 of 12/11/2020
Accredited entity according to ČSN EN ISO/IEC 17065:2013:
PAVUS, a.s. Product Certification Body
Prosecká 412/74, 190 00 Praha 9 - Prosek
Page 27 of 27 11_01-P508_V-20130510
Explanations and abbreviations: TN - Technical manual (ÚNMZ document available on the website www.tzus.cz)
Gov. Reg. No. 163/2002 Coll. – Government Regulation No. 163/2002 Coll. on technical requirements for
specified construction products, as amended by the Government Regulation No. 312/2005 Coll. and Government
Regulation No. 215/2016 Coll.
Gov. Reg. No. 173/1997 Coll. is the Government Regulation No. 173/1997 Coll., laying down specific products
for the assessment of conformity, as amended by the Gov. Reg. No. 174/1998 Coll., Gov. Reg. No. 78/1999
Coll., Gov. Reg. No. 323/2000 Coll. , Government regulation No. 329/2002 Coll. and Government Regulation
No. 88/2010 Coll.
Regulation (EU) No. 305/2011 of the European Parliament and of the Council of 9 March 2011, laying down
harmonized conditions for the marketing of construction products and repealing Council Directive 89/106/EEC
as amended by the correction published in the Official Journal of the European Union L 103/10 of 12 April 2013
ČAP CEA – Regulation of the Czech Association of Insurance Companies adopted from the European Insurance
and Reinsurance Federation (CEA)
EOTA – The European Organisation for Technical Approvals
ETAG – European Technical Approval Guidelines issued by EOTA
EAD – European Assessment Document issued by EOTA
ID to the Council Directive – Interpretative Document to the Council Directive 89/106/EEC on Construction
products, Basic requirement No. 2
NFPA – Standard of the National Fire Protection Association, Massachusetts, USA
ÖNORM – Austrian Technical Standard (ÖsterreichischeNorm)
BS – British Standard
Commission Decision 2006/751/EC of 27 October 2006, amending the Decision 2000/147/EC, implementing the
Council Directive 89/106/EEC, in relation to the classification of reaction of construction products to fire
TR – Technical Report issued by EOTA
ZP-28/2004 – PAVUS, a.s. Test Instruction for the determination of fire resistance of building materials; The
documents is available from the Certification Body Manager.
ZP-27/2008 – PAVUS, a.s. Test Instruction for the determination of the functionality class of cables, cable tray
systems and cable ladder systems (Routing) in case of fire; ; The documents is available from the Certification
Body Manager.
MoI Regulation No. 202/1999 Coll., laying down the technical conditions for fire doors, smoke resistant doors
and smoke resistant fire doors