N.S STEEL ENGINEERINGN.S STEEL ENGINEERING

865/8/A, GIDC, Makarpura, Vadodara-390 010, Gujarat, India.

+91 9426229083, +91 8530113540nssteelengineering@gmail.com

www.nssteelengineering.in www.nssteelengineering.com

About Us

VISION

VALUES ADDED GOALS

MISSIONWe have the goal of increasing corporate value through profitable growth. Our strategy is therefore based on the following strategic dimensions and our fundamental values.

We thank our customers, who were the driving force to achieve the “Hallmark of Quality of Stainless Steel Products".

PASSION: We are very enthusiast for our work and for our company. Whatever we do, we do it wholeheartedly.

DISCIPLINE: We develop solutions in a focused manner through consistent and rapid implementation of decisions once they have been made.

RESPECT: We understand the importance of teamwork, recognize the efforts made by other and respect their opinions. Here, we are referring not only to our relationships with one another but also our relationship with suppliers and other partners-especially our customers.

HONESTY: We believe in fairness and credibility in our dealings with one another. Our actions are guided by high ethical standards and we are convinced that these values are the key to our company's future success.

Our Core Strength

Our Valued Clients

We are a dependable and famous manufacturer of“ N.S. Steel Engineering”

a broad range of HAMMER MILL, AIR SWEPT MILL, PIN MILL, INDUSTRIAL

SHREDDER, RIBBON BLENDER, SCREEN VIBRATOR, SCREW CONVEYOR, etc.We are a Sole Proprietorship company, which is located in Vadoara (Gujarat, India). We provide these products in diverse specifications to attain the complete satisfaction of the clients. Further, Our Strong Logistics support make sure that these products are delivered within the promised time-frame.

Under the supervision of (Proprietor), we have gained “Mr. Nitish Thakur”huge Clientele in our country

Our Products

1) HAMMER MILL:

Hammer mill ( Screen Type Equipment ) is employed to disintegrate

almost everything, from paper products to limestone and spices.

Traditional disintegrators are technologically replaced by these modern

and highly versatile machines, having total flexibility. Combination of

different hammer styles, liner plates, sieve inserts and wear resistance

technology offer almost unlimited possibilities of crushing lumpy, bulky,

irregularly shaped, hard & fibrous materials, into coarse to medium fine

powders. Materials enters at periphery of swing hammers undergoing

size reduction along liner plates before discharging through perforated

sieve at bottom. Hammer mill machine manufacturers, suppliers,

exporters, dealers and traders in India and worldwide.

2) Air Swept Mill

Air Swept Mill (Screenless Equipment) are recommended for micro fine pulverizing of soft to medium hard , fibrous and slightly moist materials. Mill is uneconomical where frequent change over of product is required and material is abrasive. Such Impact Mills efficiently handle fibrous materials and products having similar structure. Water circulation jacket is an optional feature, apart from different styles of grinding elements. Air swept mill machine manufacturers, suppliers, exporters, dealers and traders in India and worldwide from Gujarat.

Axially fed material is swept across the periphery of hammers and whizzer type retainer plate. Grinding action takes place between high speed hammers and serrated liners. Micro fine powder is discharged through a built-in blower to a cyclone separator, coupled with a dust filter unit. Mills are supplied with pneumatic conveying system.

3) Screen Vibrator

4) RIBBON BLENDER

For faster, more accurate sizing, splitting or correcting.Vibrating screening machine is designed for the use in sizing of minerals, ceramics, refractories and other powders. The principle on which the Jaykrishna multi-form grader operates is equally adaptable for the handling of many ceramic products.The unit is more than “Just a screen” it is a precision tool for producing accurate grades, a not merely rough grouping of sizes. It is economical of power and space; screen life is long; upkeep low. Flexible in its adaptability to widely different materials and conditions, it is unyielding in the uniformity of grades produced. Multi-Deck vibrating screens are available in different models.machine using high quality materials like cast iron and mild steel. To provide a defect free range, we check this machine on construction and performance parameters. We offer this Pulverizer at pocket friendly prices.

Ribbon Mixer Machine widely used for the manufacture of dry powder, talcum powder, granules, spice and low-viscosity paste and liquid in chemicals, pharmaceuticals, food and cosmetics industries. It's especially suitable for mixing solids with solids and solids with liquids, Approximate two third of the volume of the container of Ribbon Blender/mixer is filled to ensure proper mixing. Ribbon Blender mixer is Suitable for Pharmaceutical Materials, Crystalline, Insecticides, Pesticides, and Food industry and heat sensitive, Chemical and Cosmetic products handling large Dry and wet powder volume. It consists of a horizontal “U” Vessel with horizontally installed shaft.

RIBBON Mixers has been developed with advanced technology to achieve high blending capabilities and is among the most efficient machines in the market. The ribbon mixing equipment can be used in either the batch or continuous flow form to achieve an even and homogeneous blend in a wide range of products

5) Industrial Shredder

Industrial shredder machine – shred paper, plastic, wood, rubber, glass, metal almost anything.All our Industrial shredder machines are engineered,designed and proudly manufactured in INDIA for heavy non stop usage namely for –Destroying and protecting waste materials from misuse (safe to dispose as per norms)Reducing volumes saving transportation and storage costs (proper waste management)Processing material for production (breaking bigger into smaller pieces for greater efficiency)No matter for what purpose you want an industrial shredder machine, we offer customized solutions for your application. These machines are designed keeping in mind – the material,the throughput required and finally the purpose of shredding.

6) Muller Mixture

We are leading manufacturer and exporter of Muller Mixer .Muller Mixer is also knows as a Sand Muller, Sand Mixer, Edge Runner etc. Muller Mixer is used in Foundry, Ayurvedic& Herbal Products, Pharmaceutical, Minerals (Mica powder Grinding), Lime Mortar Grinding, Fly Ash Mixing, Rice Ash Husk Mixing , Carbon Black Mixing, Snuff, Batteries, Welding rod flux, Abrasives , Soaps, Putty, Paints.Having Machine pan and wall of height the whole pan is fitted on heavy duty channels stand . Roller is casted. Roller fitted in such a way that maximum bottom area is covered . Both rollers are overlapping each other. So that no material is left Un-ground. The rollers are running on ball bearing with sealing arrangement to prevent the powder going in to rollers are driven by oil filled specially design heavy duty 2 stage gear box and powdered by As per model electric motor complete with starter & control panel and There is available top conical type top cover. The main drive from motor to gearbox by V-Belt pulley.

OUR PRODUCT RANGE

HAMMER MILL

AIR SWEPT MILL

PIN MILL

INDUSTRIAL SHREDDER

RIBBON BLENDER

SCREEN VIBRATOR

SCREW CONVEYOR

BELT CONVEYOR

MULLER MIXTURE

AIR LOCK VALVE

PULSE ZET DUST COLLECTOR

SYSTEM

Add: 865/8/A, GIDC, Makarpura, Vadodara-390 010,Gujarat, India.Mobile NO: +91 9426229083, +91 8530113540Email: nssteelengineering@gmail.comWeb: www.nssteelengineering.in l www.nssteelengineering.com

N.S STEEL ENGINEERINGN.S STEEL ENGINEERING

SALT PROCESSING PLANT

SPICES PROCESSING PLAT

CATTLE MESH FEED PLANT

CHARCOAL AND

SAWDUST(AGARBATI)

PROCESSING PLAT