NORTEK - s3.amazonaws.com · Linear’s 2-N-1 reader is a proximity reader designed to fulfill two...

NORTEKSECURITY & CONTROL

COMMERCIAL ACCESSMaster Index

Karol

Stempel

Linear’s 2-N-1 reader is a proximity reader designed to fulfill two different mounting requirements – without needing any additional hardware! The 2-N-1 can be installed as either a mullion-mount reader or, when paired with the provided adapter plate, turns the reader into a single-gang electrical box style reader. Customers get a clean, low profile for both mullion and single-gang installations ready to install right out of the box for either configuration. Linear’s cards and tags do not contain batteries, requiring no maintenance. Reduce your stock and never be on the job again without the right model reader!

Dual-Mount Prox reaDer

Convertible for both Single Gang and Mullion-Mount

2-n-1 Proximity reader

applications Door, gate and parking access

electrical junction box mounting in wallboard, block walls, etc.

Metal or wood-frame doors, windows or gates

System Compatibility

Works with certain HID 125kHz formats and card readers from aWID™-, Farpointe®- and Secura Key®

Benefits Stock only one reader for both mullion and gang box mounting

always have the right reader when on the job

Sleek, modern design

Fully potted for weather protection

up to 6-inch read range; nearly twice the range of others

n Please visit nortekcontrol.com, or contact your local Sales Manager.

2-N-1 Proximity reader SpeCifiCaTioNS & TeChNoLogy

SyStem SPeCifiCationS

reader type: proximity; 26- to 37-bit Wiegand

frequency: 125 khz

mounting: Mullion or Single gang

dimensions (H x W x d):

Single-Gang: 4.77" x 2.96" x 1.33" (121.1 x 75.1 x 33.7 mm)mullion: 3.92" x 1.74" x 0.98" (99.5 x 44.2 x 24.9 mm)

Weight: 3 oz. (85g)

iP Code: ip67

Voltage1: +5 to +16 VDC

Current draw2: 30 ma typical, 75 ma peak @ 12VDC

read range3: Up to 6 inches (152 mm)

Cabling4: 24 aWg minimum, multi-conductor stranded with an overall foil shield 500’

interface: Wiegand aBa Track ii

operating temperature:

-40° f to 149° f, (-40° C to +65° C)

Color: Black

audio tone: Sounder included

indoor & outdoor installation:

electronics sealed in weather and tamper-resistant epoxy potting

Warranty: Limited lifetime warranty

Led: four-state indicator (red, green, amber, off)

Certification: eTL listed to UL294, fCC, iCC, Ce, C-Tick

1 Linear brand power supplies are recommended for best operation2 Using PSC-1 Standard Light Proximity Card with 12VDC at the reader3 Self-evaluated4 For example, Belden® 9535 or similar

modeLS and teCHnoLoGieS SuPPorted

order # 620-100451 (2-n-1ProxHaF)

designed for these credentials:

• AWID™ 125 khz proximity protocols*

• Farpointe® Data pyramid Series proximity Cards and Tags*

• WorkswithcertainHID125kHzformatsandcardreaders

order # 620-100452 (2-n-1ProxHaS)

designed for these credentials:

• AWID™ 125 khz proximity protocols*

• SecuraKey® Series proximity Cards and Tags

• WorkswithcertainHID125kHzformatsandcardreaders

*Other compatible credential models include: Farpointe PSC-1, PSI-4, PSM-2, PSK-3, and PDT-1; HID ProxCard® II, ISOProx® II and ProxKey® II, and AWID models CS Prox Card, GR (ISO) Graphics Quality Prox Card and KT Key Tag

Single gang Mullion

© 2015 Nortek Security & Control LLC. All Rights Reserved 1950 Camino Vida Roble, Suite 150 • Carlsbad CA 92008 • 760.438.7000 • 760.800.421.1587nortekcontrol.com p/N 237020a X3

To begin the process of selecting the appropriate product for your application, we have organized this guide to walk you through the selection process. The following charts outline the performance, options, and functionality available with different keypad styles.

Quick selection guide

Select your style according to your needs

Door•Gard™

PR

OXI

MIT

Y C

AR

D R

EAD

ER

IND

OO

R

OU

TDO

OR

LIG

HT/

MED

IUM

DU

TY

BA

CK

LIT

KEY

S

BR

AIL

LE K

EYS

ALP

HA

-NU

MER

IC

KEY

S

MA

GN

ETIC

CA

RD

REA

DER

MU

LLIO

NS

UR

FAC

E M

OU

NT

FLU

SH

M

OU

NT

UL

LIS

TED

e

eM

R

SE

i

W

iLM

iLW

233

FX

prox.pad

Performance

Styl

e

HAR

SH C

ON

DIT

ION

S

HEA

VY D

UTY

Now Part of

Copyright © 2010 Linear LLC Printed in China 229981A

Now Part ofChoose the functionality

2000

242

232

212

Combine functionality with style

2000

212

232

242

e

eM

R

SE

i

W

iLM

iLW

233

FX

prox.pad

2000e

212R 232R

212SE 232SE

212i 232i

212w 232w

212iLM 232iLM

212iLW 242iLW

233

232FX

prox.pad

2000eM

Functionality

Styl

e

WIE

GAN

D

OU

TPU

TS

IND

EPEN

DEN

T

OU

TPU

TS

CO

NFI

GU

RAB

LE

OU

TPU

TS

DO

OR

PO

SITI

ON

INPU

T

REQ

UES

T TO

EXIT

INPU

T

DO

OR

AJA

RO

UTP

UTS

FOR

CED

DO

OR

OU

TPU

TS

ALAR

M S

HU

NT

SEC

UR

ED S

ERIE

S

OU

TPU

TS

2000

212

232

242

Options

Func

tion

alit

y

MAI

N R

ELAY

OVERVIEW:The 2000 Series access control keypads combineall of IEI’s functionality groups into one powerfulplatform. The 2000 Series access control keypadsmanage up to 500 users and provide completeaccess control functionality including monitoringdoor position; controlling locking hardware;triggering a propped or forced door alert or alarmshunt output. The 2000 Series outputs can beexpanded using the output expansion module [p/n2000-8EX] that provides 8 additional Form Coutputs for a total of 10 outputs.

Users can select between two modes offunctionality with the e Style 2000 Series keypad. Itcan operate as a keypad front end to IEI accesssystems and most Wiegand access systemcontrollers, or as a stand alone access controldevice.

All operation mode changes are made in the fieldby programming the desired functionality from thekeypad. No separate programmer is required toachieve this unique product flexibility.

The 2000 Series offers expanded user typesbeyond any other access control keypad solutionon the market place. The available user types arethe following: Toggle, Standard, Lockout, Singleuse, Emergency, Duress and Two-Part users.possible.

2000 Series

Stand Alone Access Control

Multi-Function Access Control Keypads

PRODUCT HIGHLIGHTS:

• Multiple operation modes; Stand-alone, devicecontrol, access control with door positionmonitoring and Wiegand or IEI protocol reader.

• Widest array of user types including; single use,lockout and two-part.

• Features Auto Voltage Sensing (AVS) a uniqueIEI power feature that does not require anyadjustments for the different input voltages. The2000 series recognizes the voltage and adjustsautomatically.

• Up to 10 Form C relay outputs with the optional2000-8EX output expansion module.

e-Styleilluminated keypad

eM-StyleBraille metal keys & trim

BENEFITS:

1. The large number of outputs allows for unique installations including elevator control.

2. If system needs change, the keypad does not need to be replaced. Simply add it to a larger scale access system as a reader.

3. The two style choices (e & eM) will fulfill most any application.

4. The field configurable operation modes, make sure that application needs are met.

FEATURE SUMMARY:

• 500 users

• Uniform IEI programming & wiring

• Illuminate backlit keys

• Door position input

• Request to Exit

• 2 form C SPDT relay outputs - default for accesscontrol function

• Optional expansion relay module (2000-8EX) – 8additional outputs for elevator and otherapplications.

• Sounder for key press and alert conditions

• All outputs can be programmed to triggerindependently

• Door bell feature

• Option for Secure installation with control electronicsin protected area

• Widest array of user type options including single useand two part rule

• 10-30 VDC and 12-24 VAC “AVA”(auto-voltage-adjust) operation

• Over-voltage protection for reliable operation

• Programmable Wiegand formats

• Supports 8-bit burst mode

• Works with all IEI access systems

• Power Requirements

• Voltage: 12-24VDC/AC

• Current draw: 140mA (max) @ 24 VDC

• Inputs

• Door position monitor - Normally closed drycontact

• Request to exit (REX) - Normally open drycontact

• Outputs

• Relay contact: 2A @ 30 VAC/DC (Main & Aux)

• Capcities

• users: 500

• events: n/a

• Mechanical

• Dimensions: 4.5”H x 2.75”W x 0.60”D

• Wiegand format

• 26 - 40 bit

• Environmental

• Indoor/Outdoor

• -30oF to 151oF (-35oC) to (66oC)

• Communication

• Wiegand or IEI front end reader protocol

Stand Alone Access Control

2

RECOMMENDED ACCESSORIES:

Note: For a complete list of system features and functionality, please visit ieib.com

2000 Series

• 2000-8EX - 8 output relay expansion module

• PWRTMPR-12 - a filtered & regulated tamper proof 12VDC/16VAC 1amp board power supply

• 285 (Black) & 268 (Chrome) surface mount back boxes.

• Pip12VDC – 12VDC 1 amp plug in transient protected transformer.

• Pip 24VDC – 24VDC 1 amp plug in transient protected transformer.

• Pip 12VAC – 12VAC 40VA plug in transient protected transformer.

• Pip 16.5VAC – 12VAC 40VA plug in transient protected transformer.

• Pip 24VAC – 24VAC 40VA plug in transient protected transformer.

2000-8EX PWRTMPR-12 285 (Black) & 268 (Chrome)surface mount back boxes Pips

3

International Electronics, Inc. • 427 Turnpike Street Canton, MA 02021 • www.ieib.com

Phone: 781-821-5566 Fax: 781-821-4443 Toll Free: 800-343-9502 6090008 Rev01 Jun07

2000 Series

ORDERING INFORMATION:

Marketing # Description

2000e

2000 series e style access control keypad. Indoor/outdoor flush mount design. Single gang. 500users. Features illuminated backlit keys and sounder. Two on-board output relays –programmable. Door monitor input and REX input. Keypad program. Stand alone mode Wiegandoutput mode and IEI Secured Series output mode selectable. 10-30 VDC; 12-25VAC. 5 yearwarranty.

2000eM

2000 series eM style access control keypad. Indoor/outdoor flush mount design. Single gang.500 users. Durable metal trim. Features heavy duty metal keys with Braille and sounder. Twoon-board output relays – programmable. Door monitor input and REX input. Keypad program.Stand alone mode Wiegand output mode and IEI Secured Series output mode selectable. 10-30VDC; 12-24VAC. 5 year warranty

2000-8EX

Output expansion module for 2000 series keypads-adds 8 control relay outputs to 2000 seriesaccess control keypads. Receives power from and installs remotely from the keypad in doublegang box or attaches to double gang plate. Requires 6 conductor shielded cable forinterconnect. Includes power LED and individual LEDs indicating status of each of the 8 relayoutputs.

285 Surface Mount, Single Gang backbox - Black - for i & e style keypads. Single lot

286 Surface Mount, Single Gang backbox; Chrome plated for i & e style keypads. Single lot

PWRTMPR12Access Control Power Supply with Tamper Module - board level Provides filtered and regulated1 amp, 12 volt power. Switch selectable AC/DC. Built-in suppression for locking mechanism.

PIP12VDC PIP: Plug-in-Power Supply 12VDC - Auto Resetting Poly Fuse)

4

The eMerge Essential™ and Essential Plus™ embedded browser-based network appliances make advanced security technology reliable and affordable for any entry-level access control application. With tens of thousands of access control systems deployed in the field, and backed by decades of experience, Linear continues to deliver unprecedented value and innovation.

These full-featured, self-contained hardware/software access systems are perfect for commercial, industrial, banking, medical, retail, hospitality, and other businesses where users need to secure their facilities, manage access of personnel, create and analyze reports, and monitor the system remotely from any web browser.

The comprehensive wizard is fast and intuitive, saving significant set-up time. Both the Essential and Essential Plus can be seamlessly scaled up, via software keys, to other eMerge E3-Series systems providing increased door and reader capacity, enhanced features, and higher level capabilities. The eMerge E3-Series makes expansion easy.

The eMerge Essential and Essential Plus set new standards of excellence for reliability, ease-of-use, expandability, best-in-class value and lowest cost of ownership.

eMerge Essential™

Access Control Made EasyAffordable, Scalable, Browser-Based Access Control

The eMerge E3-Series represents the next step in the evolution of Linear’s access control technologies, delivering faster set-up, enhanced features, and industry-leading scalability that outperforms the competition.

eMerge Essential™

eMerge Essential Plus™

eMerge EssentialCapabilities that Outshine Other Systems

Features

• Shared hardware and software architecture across all eMerge E3-Series means easy upgrades and expansion.

• Reliable, IT-friendly embedded Linux operating system eliminates: o Virus / spyware attacks o Operating System update dependency

• eMerge Essential and Essential Plus supply the right amount of access control businesses need: o Starts at 1-door / 2-reader capacity with out-of-the box expansion capability to 4-doors / 8-readers o License key-based scalability (No additional hardware is needed to expand to 2, 3, or 4 doors)

• Intuitive quick-start wizard allows for ultra-fast setup, saves hours of time versus traditional systems

• Browser-based management enables system status and updates from any place, with any browser, on any operating system

• Easily scalable via software upgrade to higher-capacity E3-Series eMerge systems

• Enclosure sizes: o Small footprint ruggedized plastic enclosure (eMerge Essential) o Midsized metal enclosure with key lock (eMerge Essential Plus)

• UL 294 Certification (pending)

• Includes ODBC-compliant MySQL database with API

Hardware Features

• 100% solid state components for extended service life

• High-speed processor handles multiple simultaneous users and more than 30 transactions per second

• Integrated tamper switch and inputs / outputs for additional functionality

• Optional Power over Ethernet (PoE) available on both Essential models (allows for backup power through a UPS)

• eMerge Essential Plus includes: o A 5-amp 12 VDC supervised power supply o Battery backup-ready enclosure o Capable of housing an additional expansion module

Software Features

• One common software for all platforms, based on Linear’s industry leading access control software

• Dashboard displays full system status at a glance including: o Event and activity log o Customizable door diagrams/floor plans with factory default templates

• Time-saving and convenient features: o Integrated card decoder o Usable from iPhone, iPad, Android

o CSV flat file database import or other mobile devices o Dynamic event filtering o E-mail, text message notifications o Built in audit-trail o Simple, easy-to-use predefined o Automatic daily data backup to reports

Micro SD or FTP-based storage o Built-in documentation library

• Optional software updates for new feature and product enhancements

Quick-Start Setup Wizard: Saves Hours of Time Getting You Up and Running

eMerge Essential & eMerge Essential Plus:Access Control Selection Simplified

Additional Options & Accessories

MODEL DEscriptiOn

System & Reader Combination Packages

Es-1cB Essential 1-door system with 1-reader bundle

Es-4cB Essential 4-door system with 4-reader bundle

Es-1MB Essential Plus 1-door system with 1-reader bundle

Es-4MB Essential Plus 4-door system with 4-reader bundle

License & Reader Combination Packages

Es-1DLB Essential 1-door license with 1-reader bundle

System Upgrade

Es-U36 Essential upgrade to Emerge Elite 36-door system

Power Options

E3-pOE PoE Module - adds PoE capability

pip12VDcrU Plug-in-Power Supply 12V DC 24 Watt

pip12V60W Plug-in-Power Supply 12V DC 60 Watt

B-12VDc7A Battery - 12VDC 7 AH

MODEL DEscriptiOn

Proximity Readers

p-300HA Proximity Reader, Mullion Mount*

p-500HA Proximity Reader, Single Gang Mount*

p-640HA Proximity Keypad Reader*

Cards

psc-1H Proximity Clamshell Card*

psM-2pH Proximity ISO PVC Card*

Key Fobs

psK-3H Proximity Keyfob*

proxKey Wiegand 125 kHz Proximity Key Fobs*

REX

EZ-rex Easy Touch Request to Exit (Heavy Duty)

Essential Plus

Metal Cabinet with SupervisedPower Supply Charging Circuit

Essential

Plastic Cabinet; Power Supply Sold Separately

DOOrs

1

2

3

4

1

2

3

4

OrDEr #(no readers)

Es-1M

Es-1M + Es-1DL

Es-1M + Es-1DL x 2

Es-4M

Es-1c

Es-1c + Es-1DL

Es-1c + Es-1DL x 2

Es-4c

OrDEr #p-300HA reader Bundle

Es-1MB

Es-1MB + Es-1DLB

Es-1MB + Es-1DLB x 2

Es-4MB

Es-1cB

Es-1cB + Es-1DLB

Es-1cB + Es-1DLB x 2

Es-4cB

DEscriptiOn

1 Door Essential Plus System*

1 Door Essential Plus System*+ 1 Additional Door License

1 Door Essential Plus System*+ 2 Additional Door Licenses

4 Door Essential Plus System*

1 Door Essential System**

1 Door Essential System**+ 1 Additional Door License

1 Door Essential System**+ 2 Additional Door Licenses

4 Door Essential System**

** Power supply sold separately All models can be equipped with optional PoE power (see options list below)

* UL 294 Certified Power Supply Included

*works with certain HID 125 kHz formats and card readers from AWID and HID

For more information, please visit www.nortekcontrol.com.Specifications subject to change without notice.

Specifications

processor: 1GHz

On-board rAM: 512MB DDR2 (333MHz)

storage: Micro SD Storage Media Supplied

power: 12V-DC

Operating system: Embedded Linux

simultaneous system users: 8

transactions per second: > 30

plastic enclosure (W x H x D): 12.25 in x 11.1 in x 2.23 in (31.1 cm x 28.2 cm x 5.7 cm)

steel enclosure (W x H x D): 18.75 in x 14.25 in x 6.5 in (47.6 cm x 36.2 cm x 16.5 cm)

Doors/portals: 1 (scalable to 4+)

Maximum readers: 8

inputs: Up to 12 / plus 2 digital

Outputs: Up to 8

cardholders: 1,000

Access cards: 8,000

cards per person: 12

card formats: 32

Access levels: 8

time specs: 100

Online transactions: 15,000

Supported Web Browsers and Partners

© 2015 Nortek Security & Control LLC. All Rights Reserved 1950 Camino Vida Roble, Suite 150 • Carlsbad CA 92008 • 760.438.7000 • 760.800.421.1587nortekcontrol.com P/N 234034B X1

Now Part of

eMerge is a Network Appliance. What exactly does that mean?

Basically, a network or computer appliance is an embedded system that is based on a dedicated hardware platform and designed to perform a specific range of functions. Hardware and software are pre-configured and installed by the manufacturer and can be easily operated to provide a range of functions – in this case all targeting physical security and fast access over a network to the system’s controls and capabilities.

eMerge is a configurable, integrated security management and access control system that can be managed from anywhere there is a network connection and access to a standard Internet browser. It is based on the industry-standard Linux operating system and requires no server or client software to be installed because it is a browser based and managed platform. This ensures there are no software compatibility issues with existing network equipment and computers. Additionally, since eMerge has been designed as a native IP device, there are no new gateways, communication wiring or plug-in hardware adapters to install.

The eMerge system runs on an ODBC compliant object-relational PostgreSQL database with an API designed to have much lower maintenance and tuning requirements than proprietary databases. The database has outstanding scalability and performance. Its SQL implementation strongly conforms to the ANSI-SQL 92/99 standards.

Since eMerge works over a network infrastructure, there are some technical considerations and requirements necessary to allow the security appliance to function seamlessly and reliably across your network and as a part of your total security system.

What are some of the topology issues to keep in mind when deploying and using the eMerge appliance?

The eMerge physical security appliance is all about simplicity and worry-free reliability across your network, so factors to consider in installing the system include wiring and bandwidth requirements, the architecture of your current wired and wireless network, site distances and the number of security resources linked to the appliance.

In the most common setup, and the one that will fit most small organizations, eMerge will share the same local area networking (LAN) resources as the users on the network. This means, the appliance will plug into the network much like a server, network router, or wireless access point and provide physical security services through the corporate LAN. A more secure configuration would have the emerge appliance connected to a separate security LAN and then linked to the corporate LAN through a dedicated router. This setup not only increases the level of security by channeling eMerge functions through a dedicated pipeline, but alleviates any bandwidth issues that may occur in high-traffic or media-rich applications.

What you need to know about the eMerge browser managed security platform

FAQ’s for the Network Administrator

Now Part of

What should I be aware of when using an eMerge Network Expansion Node as part of an eMerge security solution?

eMerge Network Expansion Nodes allow your eMerge security solution to be deployed in the most cost effective manner by making best use of your existing network infrastructure. Additionally, Expansion Nodes allow your system to scale modularly as your security requirements change.

Communication between the eMerge physical security appliance (Network Controller) and its Expansion Nodes can be accomplished securely across the local area network (LAN), wide area network (WAN), or even across the public Internet.

Each message between the eMerge appliance and eMerge Expansion Nodes is encrypted and then authenticated using a unique 160-bit message digest (SHA-1) to ensure security.

In some cases, it may be more cost-effective and desirable to link a series of eMerge Network Expansion Nodes to the eMerge appliance by placing an eMerge Network Node at one end or floor of a site and wire all local system resources to this node. Typically, this configuration is more desirable when extending the security environment across large distances in a building or throughout multiple floors. Important points to keep in mind with this type of layout include:

Reader wiring that exceeds 500 feet (152 meters) will require an additional node to reduce the wire lengths to less than the • maximum allowed by reader standards;

Input or output wiring that exceeds 2000 feet (610 meters) will require additional nodes to reduce the wire lengths and • distance between devices;

The need for dispersed system resources - for example, at both ends of a large building - may require the addition of more• eMerge Network Nodes.

How do eMerge Nodes and the Network Controller use the network?

When an Expansion Node boots, it initially selects for itself a temporary random IP address in the zeroconf address space. The Node then multicasts for a Network Controller at a specific UDP port (7262), and presents a Unique Identifier (UID) to distinguish the Node. A Network Controller then responds to this multicast through the same UDP port 7262, providing its own IP address and presents a unique addressing method for the Node.

There are three IP addressing methods available:

An existing DHCP server on the network can assign IP addresses;a.

A static IP address can be assigned using nnconfig.exe (This application is on the CD provided with the Network Controller);b.

The Network Controller can provide IP addresses to Nodes, but only to specific address ranges.c.

Once a proper IP address for the Node is selected, further communications between the Node and the Network Controller occur directly between their respective IP addresses using TCP port 7262. The Network Controller may also require:

TCP Port 23 for Telnet server access. This can be used for remote support. The Telnet server is disabled by default.• TCP Port 3000 open for communication from video management system inputs• TCP Port 3306 open for PostgreSQL report usage•


Now Part of

How do eMerge Network Expansion Nodes connect to the eMerge appliance across subnets or the public Internet?

Connecting eMerge Expansion Nodes across various subnets or even over the Internet is relatively easy, although there are some important points to remember to make the connections as effective and reliable as possible.

Typically, a subnet may represent all the machines at one geographic location, in one building, or on the same local area network. Subnets connect to the central network through a router, hub or gateway, are defined as all devices whose IP addresses have the same prefix. Addresses within a subnet are reachable without going through a router, and thus can be reached by broadcast.

In installations where Expansion Nodes are on a separate subnet or LAN from the Network Controller, you will have to directly supply the Expansion Node with an IP addressing method and the address of the Network Controller that will manage it. This is because the Expansion Node multicast transmissions and Network Controller responses are usually blocked across subnet boundaries.

Direct addressing of the Expansion Node can be accomplished by using nnconfig.exe (This application is on the CD provided with the Network Controller). Please keep in mind that when communicating across subnets or networks, you must transmit through a router, and this may mean that a port must be opened to allow communication (refer to NetworkPort Usage Table on next page).

eMerge Security NetworkInformation Requirement Checklist

DNS (Domain Name Server) IP address (es) ✓

Gateway IP address, if any ✓

Subnet mask and IP addresses for the eMerge Controller and Nodes ✓

E-mail relay server address or name ✓

E-mail address name for the eMerge and setup on the e-mail server to accept mail ✓

for the eNC relay

Domain account name and password for a server providing network attached storage ✓

(NAS) *Optional

NAS server name in Universal Naming Convention (UNC) format: ✓

\\domain name\\machine name\\share name

NTP (Network Time Protocol) server name (s) if the network has no Internet access ✓

(Pool.ntp.org is specified by default).


USA & Canada (800) 421-1587 & (800) 392-0123(760) 438-7000 - Toll Free FAX (800) 468-1340

www.linearcorp.comCopyright © 2010 Linear LLC Printed in China Lit. Order # 229983 B

Network Port Usage Table (Versions 1.4 and higher)

TCP Port 80Must be open to the Network Controller for Browsers to access the Security Application. This can be configured on a different port.

TCP Port 443Must be open to the Network Controller for Browses to access the Security Application using HTTPS (SSL). This can be configured on a different port.

TCP Port 7262Must be open to the Network Controller for communications between the Controller and Nodes. Be sure that this port is open through routers and firewalls for any Nodes on different subnets from the Network Controller.

TCP Port 23 (For support only)Must be open to the Network Controller using a jumper on the Controller module for Telnet access to the Controller.

TCP Port 3000Must be open to the Network Controller for Video Management System virtual inputs to communicate camera up/down and motion detection messages.

TCP Port 3306, 5432 Must be open to the Network Controller for PostgreSQL report usage.

TCP Port 20, 21

When using active FTP, these ports must be open to the FTP server for FTP backup from the Network Controller.

When using passive FTP, port 20 is not required.

Ports must also be left open to the network Controller for the FTP server responses. The network administrator must set up these ports.

MicroNode


e3 Essential & Elite Systemse3 Tele Entry Systems

Comprehensive embedded OS and browser-managed access systems

Browser-managed Access Control and Telephone Entry Solutions

e3 ACCESS CONTROL SERIESOut-of-the-box Ready Access Control

Managed and Self-Managed, Embedded Browser-Managed Access Control & Telephone Entry Systems with optional Remote Management Console.

The proven e3-Series delivers faster set-up,enhanced features, and scalability with tens ofthousands systems installed. These feature-rich, self-contained access systems are designed for small & mid-sized applications where users need to secure their facilities, manage access of personnel, create and analyze reports, and monitor the system remotely.

The e3-Series’ comprehensive wizard is fast and intuitive, saving significant set-up time. The latest addition to the e3 family are the Entry 4.3" models which provide access control and telephone entry all-in-one, designed for single and multi-tenant applications. All e3 systems share one common database and programming interface.

Scalable for any small and mid-sized application:

Whether you are commercial, industrial, medical, retail, hospitality or other businesses where users need to secure their facilities, e3 systems are perfect for you. The addition of multiple licenses can expand typical access control systems far beyond their normal parameters and allow coverage of a wide variety of applications. Common hardware and one code-based platform allow easy feature deployment via licensing. e3 system is scalable 128 doors, 256 readers, 1K – 20K users.

Out-of-the-box ready:

e3 systems do not require PC or software to install. The embedded Linux OS and common hardware platform provide the ideal solution at the right price and optimum performance without the indirect soft costs of other systems.. Embedded mySQL enables quick and easy set-up via integrated tools for data import. Many of our expansion modules and accessories offer the right specifications to fit any system design. Design provides long term reliability and reduced customer support issues.

Additional RMR via services:

Embedded (optional) Remote Management Console - RMC is a Re-occurring Monthly Revenue portal to provide remotely managed access control and services. Extend your ability to manage clients fast and efficiently. View and access one or many systems through one portal with one click. RMC enables management from anywhere with any smart device. It is accessible through standard browser utilizing industry SSL and hand shake. RMC eliminates set-up of remote software and enables faster support.

LOWER TOTAL COST OF OWNERSHIP FOR CUSTOMERSBetter Profitability for the DealersMarket leading capabilities & value targeting entry-level to mid-market access control applications. Our technology focus drives profitability in the “sweet” spot of installations. Thanks to e3 series’ lower cost for installation, lower cost for support and RMR platform, e3 sells more jobs.

• Faster to setup, simple to maintain

• Embedded Linux Operating System (OS) - MVP (Minimized Virus Potential) - No Microsoft update dependencies

• Independent network, server, and dedicated workstation hardware are not required

• Includes SQL database engine; no add-on database software licenses required

• Browser managed eliminates the need to load client licenses

• Common hardware reduces installer training and inventory cost

• Common software user interface means reduced training costs

• Open platform allows for cost-effective integration with other technologies,

• Flat cost for replacement / service hardware.

Software Feature Comparison Essential™ Elite™ EntryDashboard • •

Graphic floorplans • •

Card decoder • • •

First-in-unlock rule • • •

Manager first rule • • •

2-man rule • • •

Portal unlock scheduling by time • • •

Multiple holiday schedules • • •

Multiple language support • • •

Audit trail • • •

Toggle/Passage • • •

CSV file import tool • • •

Built-in reports • • •

One time events • •

Threat Level Management

-Alters access control system behavior globally •

-Threat levels 5

Network-secure API for external application integration •

Distributed Redundant Database architecture (DRD) • •

User-definable fields 5 10 32

Maximum concurrent web users 8 16 16

$System Setup

Viruses

PC Updates

LINEAR E3 SERIES OVERVIEW OF SYSTEM FEATURES

e3 EssentialThe entry-level value leading 1–4 door system with immediate expansion capability to 4-doors / 8-readers (no additional hardware is needed to expand doors).

• System easily expands capabilities via License-To-Go—grow your capabilities as your needs change.

• Essential: Housed in a compact plastic enclosure

• Essential Plus: Housed in a steel enclosure; includes supervised AC battery back-up

• Easily scalable via software upgrade keys to higher-capacity e3-Series eMerge Elite models

• UL 294 Certification (Plus and Standard model)

e3 Elite• Feature rich system designed for 4 - 128 multi-door,

multi-site systems

• Elite ships starting with door license; expandable up to 128-doors

• Includes Distributed Redundant Database (DRD) architecture

• More users, doors, readers, online transactions and overall capacity

• Advanced access control features & capabilities

• Centralized and/or distributed hardware

• X86 VM version for hundreds of additional doors and sites

Entry Series• Entry ships starting with 2 doors; expandable up to

36-doors

• Includes 4 in/out readers

• Includes MegaCode Receiver, TTY Port, Power Transformer and mounting hardware

• Works with all types of 2 wire telephony

• Remote management capable

• Integrated Networking / TCIP Port, RS485, RS422 Port and TTY Port

• Durable ArmorTech polycarbonate and metal housing options

LINEAR E3 SERIES OVERVIEW OF SYSTEM FEATURES

Common Features• Shared hardware and

software architecture across all e3-Series

• Reliable, IT-friendly embedded Linux operating system

• SQL database with optional API available (Elite only)

• Intuitive quick-start wizard

• Browser-based management enables system status and updates from any place, on nearly any browser

• Easily upgradable to incorporate future e3 technology integrations

• UL 294 Certification

Hardware Features• High-speed, 1GHz

processor handles multiple simultaneous users and more than 30 transactions per second

• Long-term event storage via micro-USB card and FTP back-up

• Optional Power over Ethernet (PoE)

• Controller and Expansion Node enclosure options:

– Small footprint ruggedized plastic enclosure

– All metal enclosures include supervised AC battery backup system

• Step-up Power Supply (integrated and stand-alone)

– 10Amp - with Step-up Regulators provides both 12 and 24 VDC at the same time

– Designed to lower the cost of installation by eliminating the conduit, interconnected wiring to power locks and auxiliary

Software Features• Mobile-friendly user interface

• Set-up wizard

• Dashboard displays full system status-at-a-glance including:

– Event and activity log – Customizable door

diagrams/floor plans

– Remote door lock and unlock with status view camera’s, photo id’s and defined events with acknologments

• Time-saving and convenient features:

– Integrated card decoder tool

– Dynamic event filtering – Built-in audit-trail – Automatic daily data

backup – Built-in documentation

library – CSV flat file database

import and export – E-mail, text message

notifications – Simple, easy-to-use

predefined reports – Micro SD or FTP-based

storage

Capabilities that Outshine Other Systems

1 Family - ModuleES - EssentialEL36 - EliteEC - Entry StandaloneEN - Entry NetworkedEN-EXN - Expansion NodeEV - Elevator ModuleEN-ACM - Access Control Module

2 Select Screen Size (Entry)0 - no screen1 - 1” monochrome2 - 2” monochrome4 - 4.3” inch color7 - 7” inch color touch10 -10” inch color touch

2 Select Module Door Capacity1 - 1 door2 - 2 door4 - 4 door

3 Select Enclosure TypeC - Compact PlasticA - ArmorTech™ PolycarbonateM - SteelB – Board Only

EN-2A4B 4 Select Reader Bundle B - Reader bundle matches moduledoor capacity (1, 2, or 4)

No “B” at the end of the model numberindicates no readers are included

LINEAR E3 SERIES ORDERING GUIDE

MODEL DESCRIPTION

ACM Modules (to add into existing enclosures) EliteACM2D 2-Door ACM Module

ACM4D 4-Door ACM Module

ACMEV Elevator ACM Module

ACM2DB 2-Door ACM Module w/2-Reader Bundle

ACM4DB 4-Door ACM Module w/4-Reader Bundle

License & Reader Combination PackagesES-1DL Essential 1-door license

ES-1DLB Essential 1-door license with 1-reader bundle

EL36-4CBElite-36 4-door system w/4-reader bundle, compact

EL36-4MB Dashboard

Add-on Licenses

ES-U36 Elite-36 4-door system w/4-reader bundle

EL-U64Upgrade license for Elite 36 to 64-door capacity

EL-U96 Elite 64 to Elite 96 upgrade

EL-U128 Elite 96 to Elite 128 upgrade

EL-BADGE-L Elite Badging License

Extended WarrantiesE3-EW5 Extended 5-year warranty (per board)

MODEL DESCRIPTION

Power OptionsE3-POE PoE Module - adds PoE capability

PIP12VDCRU Plug-in-Power Supply 12V DC 24 Watt

PIP12V60W Plug-in-Power Supply 12V DC 60 Watt

Proximity Readers2-N-1Prox HAF / HAS

Essential 1-door license

2-N-1Prox HASHID, HWID, Securekey compatible 125 kHz

WOR Wiegand Output Receiver

Cards & Key Fobs

ProxCard II Wiegand 125 kHz Proximity Card

ProxKeyHID, HWID, Securekey compatible 125 kHz

ACT-31C & 34C 1 or 4 Channel Block Key Ring Transmitter

ACT-31C & 34C 1 or 4 Channel Block Key Ring Transmitter

REX

EZ-Rex Easy Touch Request to Exit (Heavy Duty)

Additional Options & Accessories

Stand-Alone Power SuppliesPS124D-02A4 12 VDS, 2 Amps

PS124D-05A4 12 VDS, 5 Amps

PS124D-10A8 120 VAC, IEC Cord

LINEAR E3 SERIES SPECIFICATION COMPARISONS

e3 Essential™ Elite™ Entry EC Entry EN

Processor 1GHz/All Models 16 GHz

On-board RAM 512MB DDR2 (333MHz) 1 Gig DDR 3C

Storage 4 GB Micro SD 8 GB Micro SD 8 GB Micro SD 16 GB Micro SD

Operating System Embedded Linux

Maximum Concurrent Administrators

8 16 8 16

Transactions Per Second Per Module

30+

Doors/Portals 1 to 4 128 2 36

Maximum Readers (in/out)

8 256 4 72

Expansion Modules N/A 32 N/A 8

Elevator Control Modules N/A 5 N/A

-Elevators / Cabs N/A 5 N/A

-Floors / Module N/A 36 N/A

-Elevator Groups /Module

N/A 16 N/A

Inputs Up to 12 8 to 280 8 Up to 126

Outputs Up to 8 4 to 140 4 Up to 72

Maximum Users /Cardholders / Dir

1,000 5,000-20,000 1,000 10,000

Access Cards 8,000 120,000 5,000 120,000

Cards Per Person 12 32

UL CertificationUL294 for Standard

and Plus modelsUL294 Series 6

Badging N/A Optional N/A

Antipasspack N/A Timed N/A

Card Types Toggle, One Time, First In Manager,

2 Man Rule, Passage, Relock, Extended Unlock, Latchkey

Scheduled One Time Events / Outputs

N/A 50 150

Card Formats / Integrated Card Reader

32/Yes

Total System Access Levels

25 250

Time Specs (schedules) 25 128 250

Holidays 30 60 30 60

Online Transactions 15,000 30,000 10,000 50,000

User Defined Data Fields 5 10 10 10

For more information, please visit www.nortekcontrol.com.Specifications subject to change without notice.

Copyright © 2017 Nortek Security & Control LLC. All rights reserved. Linear is a registered trademark of Linear LLC. Specifications and product availability subject to change without notice. Connect with us today—NortekControl.com or 1.800.421.1587.

Nortek Security & Control | 1950 Camino Vida Roble | Suite 150 | Carlsbad, CA 92008 | 800.421.1587 | linear-solutions.com

10018070A

Optional RMC - Remote Management Console

REMOTE ACCESS FOR MANAGED AND SELF-MANAGED

1. Central with Total Mobility: Securely access and manage control systems anywhere and anytime from one location - yours

2. Save Time & Money: Web-based secure access without preinstalled desktop software supports embedded access control and video platforms

3. Be There, Right Now: Manage systems remotely, programming and software setup personnel do not need to be on-site

4. Focus on Your Work, not Getting it to Work: One GUI with easy-to-use dashboard and toolbar will increase customer support speed and reduce support costs

Always Connected—Always In Control—Always New Opportunities

SECURE REMOTE CONNECTIVITY FOR MANAGED ACCESS CONTROL SYSTEMS

RMC 2.0 incorporates encrypted firewall tunneling technology linked to remote back-end UI toprotect remote access to your connected devices.

RMC 2.0 solution gives dealers a single, easy-to-use graphical-user-interface (GUI) to view allconnected panels, assign role-based on both user and device and connect to each one with asimple click. It provides both IP video and managed access control systems access to web-based applications, and provides dealers with resources to create highly secure, value-added services to end-users.

Key Features • Leverages most existing networks

• Demonstrated firewall-friendly web socket protocols

• Secure, encrypted (SSL/TLS) connections

• Assign access to one or many systems. Group systems for easy of management.

• Forward with variety of TCP/IP based protocols, inc. HTTP(S)

• Highly scalable up to thousands

• Ability to customize dealer portal

• API available for third party integration and customization

Key Benefits• Mobile friendly user interface: program and manage

anywhere, anytime

• Reduce the need to send technicians on-site to perform routine system maintenance and troubleshooting

• Increase customer support speed and satisfaction

• Generate recurring monthly revenues by offering value-added services

OVERVIEW:Hub Manager Professional Software makes programming and operation of Secured Series Access Systems fast and mistake free. It is a powerful and easy-to-use software solution for most applications and takes “Access Control Simplified” to a new level. With its fast and comprehensive management reports, Hub Manager Professional Software meets the needs of the mainstream commercial access control market. With Version 8.0 of Hub Manager Professional Software, IEI provides new features and improved functionality for access control.

Version 8.0 of Hub Manger Professional is included with all IEI Secured Series systems and kits, and with prox.pad Plus series of products and LS2 Series of products. It can also be down-loaded free of charge from the IEI website at http://www.ieib.com/support-software-downloads.html. Version 8.0 is reverse compatible to all pre-existing Secured Series controllers.

Vista CompatibilityWith Windows Vista more prevalent in the marketplace, Version 8.0 of Hub Manager Professional Software will support Windows Vista operating systems, including Vista Home Premium and Vista Business. It also supportsWindows server 2003 and 2008 Standard and Enterprise. The requirements to support the current Windows Vista operating systems are a major enhancement for this version of the software.

Max 3 Output Module SupportedThis version of Hub Manager Professional Software will sup-port programming for the new Max 3 Output Module (M3-OM). The Output Module will add 8 outputs per door. The software will allow you to specify a custom name and timer value for each of the 8 outputs. Any combination of these outputs can be assigned to a user. Applications for this version of the software and the Output Module can include elevator control, handicapped door control, and controlling or triggering a camera or DVR upon a card read or PIN code.

Temporary UsersThe use of Temporary Users is included with this version of the software and the Max 3 v2 controller. With this option you can specify whether or not to grant access to users that are set to ‘Temporary’ status. You can specify the start and stop date of each user individually, thereby granting or denying access to specific users based on date. With this feature, a user will only have access between a start date and a fixed stop date

Access Level Detail ScreenThis version of Hub Manager Professional Software includes enhancements to the Access Level edit screen which now make it easier for you to set up access levels. The Access Level Detail screen in the software follows a logical flow identified with numbered steps. You can assign individual users access levels to specific doors, enabling you to trigger pre- determined outputs for those doors and users. This adds a new level of flexibility to your access control requirements.

Hub Manager Professional Software

Version 8.0 Software UpdateSecured SeriesTM

pROduct hIghlIghts

Major Functionality

• Windows Vista Compatible (Vista Business & Vista Home Premium)

• Supports the Max 3 Output Module (M3-OM), which adds 8 outputs per door

• Temporary Users feature

• Improved access level detail screen with each door edited separately

• Delete user feature

• Expanded time management reports

Additional New Features & Enhancements

• Selectable modem retries

• Selectable installation directory, important for Latin America versions of Windows

• First-In auto unlock can be triggered by user

• DTD printer support – Data Transfer Device for LS & prox.pad Plus IR

• Faster data communication across IP networks

1950 Camino Vida Roble, Ste 150Carlsbad, CA 92008 T 781.821.5566 F 781.821.4443 Toll Free: 800.421.1587www.ieib.com

Hub Manager Professional Software

Delete User FeatureThe Delete User feature allows you to select specific users and delete them from the system. It allows a user to be completely deleted from the database. This function is useful in installations that are reaching the maximum number of users per site. It also makes large database management easier. The Disable User and Retire User options continue to work as another option.

Expanded Time Management ReportsThe Time Management Report has been expanded to include three types of reports. A Detailed Daily Report shows the de-tailed daily activity of each user and includes the total number of gross and clear time at the end of each day. A Summarized Daily Report only shows the daily total gross and clear time. A Summary Report shows the total gross and clear time for a specified date range. (Gross time is defined as the total amount of time from the first IN event of the day to the last OUT event of the day, including any time between IN and OUT events throughout the course of the day. Clear time is defined as the total amount of time, from the first IN event of the day to the last OUT event of the day, excluding any time between IN and OUT events during the day.)

Selectable Modem RetriesHub Manager Professional 8.0 will now attempt to retry the modem dialing sequence if a connection fails for any reason. You can now define the number of modem retries. The number of redials is set to 3 by default.

Selectable Installation DirectoryVersion 8.0 will allow you to select the drive and folder where you want to install Hub Manager Professional software. This feature allows you to install the program to any location you choose, such as a D drive.

First In Auto UnlockThe First In Auto Unlock feature is useful for applications where a door – such as the main front door of an office – is to remain in the locked state until a designated person – such as the receptionist who monitors that door – comes in. In this scenario, when the receptionist presents their credentials to unlock the front door, that door will remain unlocked until the specified time zone expires (normally at the end of the busi-ness day). This feature allows you to designate which users can trigger a First In Auto Unlock.

DTD Printer SupportThe DTD (Data Transfer Device) Printer utility will include a print button in the software which will allow you to print a log file directly from the program. The saved data can then be viewed on the DTD screen and/or transferred to the PC as a text file. This feature will also enable the DTD to function like an HP Printer with early versions of prox.pad.

Faster Data Communication across IP NetworksThis version of Hub Manager Professional increases the speed of data communications across IP networks. It supports the SEG-M at speeds of 100 Mbps.

Secured SeriesTM

P/N 229665 X1

Linear eMerge 50P/5000P

Key Features � 100% Web user interface supports common browsers

� Wizard-driven 5-minute setup from power-up to access card read

� Solid state design for years of trouble-free operation

� Supports proven eMerge Network Nodes and MicroNodes

� Single cabinet design with expansion space for 4 blades

� Supplied external 12VDC power supply

� System “landing page” shows full system status at a glance

� Widget Desktop support for customized monitoring display

The Linear eMerge blends advanced capabilities with ease of

configuration and use for small to mid-sized commercial and high end

residential applications. eMerge integrates credential-based access

control, intrusion detection, and video surveillance for a small to mid-

sized facilities. It is part of Linear’s access family, proven over hundreds

of thousands of operating hours in the field.

eMerge family is a 100% IP-based, solid state, web-based network

appliance. Other than terminal connections for access controlled

doors and intrusion detection points, an IP network is all of the

connectivity the system requires. A common web browser provides

all configuration, administrative, and monitoring functions. Solid state

design means no moving parts - and a trouble-free, low maintenance

ownership experience.

eMerge streamlines access control configuration by automatically

locating network connected Network Nodes and MicroNodes on its

local subnet, allowing them to be statically or dynamically addressed.

Wizards then automatically create access control alarms, access levels,

and configuration parameters. By following a few simple steps,

eMerge can be brought from first power-up to the first access card

read in about five minutes.

eMerge is provided in an enclosure that includes the eMerge

controller, one Access Control Module, and space for up to three

additional modules. Available add-on modules support two full

portals (2 readers, 4 inputs, and 4 outputs), eight inputs, eight

outputs, or eight temperature points apiece. Installers can mix and

match blade types to achieve the required mix for their applications.

Further expansion is easily obtained by adding additional nodes or

MicroNodes to a limit of 192 readers*, 512 inputs, and 512 outputs.

Overview

The Landing Page automatically displays upon login, giving instant access to commonly used system commands alongside complete status information and video. Users can run a camera tour or display a multi-camera view right on the landing page.

*See models for varying number of doors.

Features Specifications SystemOnline transactions 40,000,000Available access levels 512Simultaneous users 5Readers (per enclosure) 8Portals (nodes) 32 (16) - * Varies by modelMax inputs/outputs 512/512

Platform Storage (internal) 4.0 GB Processor Atom N2800RAM 2.0 GB OS Ubuntu Linux 10.04 LTSNIC (10/100/1000) 1 Certifications / Compliances FCC Warranty 1 YearDimensions (H, W, D) 13in x 13in x 8.5in Weight 11lbs (5Kg) Operation Temperature 32° – 95° F (0° – 35° C) Storage Temperature -4° – 158° F (-20° – 70° C) AC Input 85-260 VAC (Max 49 W)

Part Numbers * � 230219P eMerge 50P System = 32 Doors � 230220P eMerge 5000P System = 140 doors with

add-on option to 192 � 620-00346 eMerge 52 Additional License Upgrade

(Total of 192 Doors) *Only for 5000P Model � 620-10034 eMerge 50P Controller Only

Replacement (housing & controller package only) � 0-580100-L eMerge Access Control Blade � 0-587004 eMerge Expansion Node � 0-589004 eMerge Expansion Node with Line Power � 0-580110 eMerge Input Blade � 230222 eMerge Micronode � 0-580120 eMerge Output Blade � 0-580130 eMerge Temperature Monitoring Blade � 0-580131 eMerge Temperature Monitoring Probe


www.linearcorp.com

Schematic only. Not a network diagram.

P/N 235377 X6

eMerge 50P eMerge 5000P

Access Control Readers 32 140 *Option 192

Maximum number of cameras 256 256

Maximum number of card holders 5k 20K

Email and SMS Yes Yes

NAS back-up Yes Yes

Burg Interface (loops) Yes Yes

Widget Desktop Yes Yes

Custom Reports No Yes

User Roles No Yes

Threat Levels No Yes

Floor Plans No Yes

Badging No Optional

Video Management System (VMS) Optional Optional

OVERVIEW:“PIPs” That’s short for Plug‑in Power Supplies. With these little gems, you won’t waste your time and money installing hardwired transformers, power supply boards, or dedicated power supply cabinets in your next CCTV, security, or access control installation.

Go GREEN! These plug-in power supplies are EISA 2007 compliant with less than ½-watt standby power. They offer excellent efficiency and energy savings compared to the typical transformer/rectifier/regulator designs of the past.

On the input side, these PIPs contain built‑in surge protection to quickly suppress harmful AC line voltage transients and line spikes.

On the output side, these PIPs provide accurate 12‑volt or 24‑volt DC regulation from 0% to 100% load. This is a tremendous bonus that allows these power supplies to be used for low current battery maintaining applications as well as intermittent load and continuous load high current applications.

The lighter weight of these PIPs also saves you on freight!

These DC output PIPs are short‑circuit proof. They contain auto‑resetting poly fuses that protect the supply, and your installer’s reputation. Be sure to carry one of each in your service truck so you’ll be ready the next time some old tired power supply goes down in the field.

Features & Benefits• Outputvoltageregulatedat±1%from0%to100%load,expandsoptionsforuseinlow-loadandhigh-loadapplications

• Poly-fuseautomaticallyresetsafterashortcircuit,preventsunnecessaryservicecalls

• GroundprongonACpowerinputandgroundoutputterminal,providesinputprotectionandeasypanelgroundconnection

• Robustsurgeprotection,preventsAClinespikesandtransientsfromharmingthepowersupplyortheconnectedequipment

• RedLEDpowerindicator,showsataglancethatthesupplyisoperating

• PlugsdirectlyintoACoutlet,knockoutforwalloutletretainingscrew,easyandquicktoinstall

• Actsastransformerandpowersupplyin-one,nocabinettomount

PIPs Low Voltage Plug-in DC Power Supplies

Plug-in Power Supplies

PIP12VDCRU 12 VDC Output

PIP24VDCRU 24 VDC Output

Regulated DC Output Supplies

SPECIFICATIONS

MODEL # ORDER # INPUT OUTPUT DIMENSIONS

PIP12VDCRU0-291312RU

100-240VAC@50/60Hz 12VDC@2Amps(24Watts) 2.5”Wx3.5”Hx2.25”D

PIP24VDCRU0-291324RU

100-240VAC@50/60Hz 24VDC@1Amp(24Watts) 2.5”Wx3.5”Hx2.25”D


www.linearcorp.comCopyright © 2011 Linear LLC 231366 A

REGULATORY INFORMATION

UL and ULC Listed

• UL/cUL1310ListedClassIIPowerSuppliesfordrylocations

EISA Compliant

• BothmodelsareenergyefficiencyLevelIVandarecompliantwiththeEnergyIndependenceandSecurityActof2007

FCC Compliant

• CompliantwithFCCRulesforClassBdevices

ROHS Compliant

• ElectricalandelectroniccomponentsusedinthesepowersuppliesarecompliantwiththeRestrictionofHazardousSubstancesDirectiveof2003

RoHS

Acts as transformer and power supply in-one, no cabinet to mount

® LINUX is a registered trademark of Linus Torvalds in the U.S. and other countries.

® iPad is a registered trademark of Apple Inc. 230913A

When it comes to security and access control, look no further than Linear – your

single source for the largest product selection in the industry – with solutions that

are simple and fast to install and use.

Linear and International Electronics (now part of Linear) proudly offer more choices

than any other manufacturer, from a single door to systems that monitor hundreds

of entry points and integrate many different technologies.

Let Linear help you select the right solution for any application!

Now Part of

Many Doors. One Solution.

Make Linear Your Source for All Your Security and Access Control Needs.

Find all of these products, and many others, in your neighborhood, at any of hundreds of distributors across the country.

Available when and where you need them, Linear and IEI bring you more than 40 years of reliable, proven products at

competitive prices – backed by strong warrantees, technical support and attentive service. We value your business!

Get More Information, and Register to Win an Apple iPad®!

• To enter our drawing, simply register online at: www.linearcorp.com/IEI for your chance to win an iPad®.

Drawing Closes July 31, 2010• Request a full-line IEI or Linear catalog; or, sign up to receive ongoing updates and sales support materials!

Linear puts you in control with hundreds of additional residential and commercial products, from Communications

and Audio/Video/Data Solutions, to Central Vacuum, Personal Emergency and Security Systems, to a host of

Access Solutions, including Operators for Gates, Garage and Commercial Doors; Telephone Entry Systems

and convenient Radio Frequency Devices.

Visit www.linearcorp.com today!

C o m m u n i C A t i o n | P e r s o n A L e m e r g e n C y | A C C e s s C o n t r o L s | s e C u r i t y | A u d i o / V i d e o / d A t A | C e n t r A L V A C u u m

800.421.1587 | www.linearcorp.com

PRINTER’S INSTRUCTIONS:

BroCHure,iei soLutions - LineAr P/n: 230913A - inK: 5/5: 4-CoLor ProCess + Pms 431C grAy + oVerALL sAtin AQueous CoAting - PAPer stoCK: 100# sterLing gLoss teXt or eQuiVALent - siZe: FLAt: 15.000” X 10.750”, FoLds to 7.500” X 10.750

Browser Managed Security Platforms

Win Over IT Managers and Get More Jobs with eMerge

The eMerge family of network appliances gives you high-end features and a lower total

cost of ownership on an operationally superior platform your customers will choose

over traditional, PC-based access control systems.

• No Software to Purchase or Support! Includes Embedded LINUX®

Operating System; Embedded PostsgreSQL Database Engine, and

Built-In Web Server

• Sets Up Fast

• Easy-to-Use Intuitive Interface

• Complete, Scalable Security in One Integrated System

(Access Control; Video Management; Event Monitoring;

Management and Custom Reporting Tools; Alarm Panel Interface)

Software Managed Access Systems

A Smart and Easy-to-Use Solution for Small to Midsize Applications: Secured Series Access Control Systems

The ideal line for dealers and installers seeking simplicity, cost flexibility and

easy installation, the Secured Series gives you:

• Complete Systems, Inclusive of Hub Manager Software, or

• Your Choice of Individual Control Panel, Reader and Keypad Components

Install, program and even troubleshoot easier than any other access control

system, with:

- Simple, Easy-to-Use Set-Up Tutorials

- Multiple Hardware Options Equipped with Many LEDs and Test Points

Choose from the Max 3 and MiniMax 3 systems, and the Prox.pad Plus

Series, and ensure trouble-free operation!

Electronic Locksets

Easy to Install and Use Keypads – Stand Alone or Software-Managed – the LS Series Access Control Locksets

Get value in field-proven keypad technology with ANSI-compliant and UL-listed Grade 1 locksets,

used alone or managed with Hub Manager software:

• Various Lock Configurations Including Cylindrical, Mortise, Deadbolt, and Exit

• Multiple Finishes

• Designed for Indoor/Outdoor Durability and Low Maintenance:

- One ¾ inch Hole with ANSI Door Preparation

- Unique Wire Raceway Protects Wires and Eliminates Service Calls

- UV Conformal-Coated Electronics and Neoprene Gasket for Exceptional Weather Proofing

Stand Alone Keypads

The Most Diverse Line of Stand Alone Keypads Available from One Manufacturer

Stop buying from more than one manufacturer and wasting time learning different systems.

Simplicity, uniform wiring and cutting-edge keypad technology result in lower operational costs

compared with other manufacturers.

Linear keypads provide automatic sensing voltage input from 12 - 24 volts, and are available in

styles and functionality to fit virtually any application:

• Indoors/Outdoors

• Wiegand

• Proximity

• Magnetic Strip

• Backlit

• Mullion Mount

• And More

Please visit your local dealer or distributor; or, go online to www.linearcorp.com for more product details.

Learn one uniform wiring/programming method across all Linear products and open the door to faster, smarter installations.

OVERVIEW:The Secured Series Max 3 access system with Hub Manager Professional software is a powerful and easy-to-use solution for small to mid-sized applications. The Max 3 system provides a secure and trusted access control system that uses hardware architecture that is based upon the Secured Series HubMax II system. The Max 3 system is available in two cabinet configurations – Max 3 system and MiniMax 3. System expansion is made simple with the modular design of the two available configurations.

Expanded features and functionality are achieved when the system is programmed with the Hub Manager Professional software. The software provides fast and easy setup with its included video tutorials and setup wizards. Communication to the access system hardware from a PC can be either over a LAN/WAN connection or through a RS485 serial connection. Both communication methods are made easy with communication accessories. The SEG-M is a secure TCP/IP adapter and the USB-Serial or the RS232-485 serial adapters make direct PC connection virtually effortless.

All door settings and user information are programmed into the Max 3 door control module (p/n: Max3Mod).

Max 3 Access System

Product Bulletin

NEW FEATURE SUMMARY:

• Supports Wiegand and Secured Series readers. Max 3 supports both in and out readers connected directly to the module. Max 3 supports any Wiegand format up to 39 bits. Supports sounder and LED control.

• Faster and more reliable communications – Imports transactions in 1/3 of the time as compared to the HubMaxII system. The Max 3 system doors will continue to operate normally during a log import or a system export.

• Hub Manager Professional software operational features: System Dashboard – Lock and unlock sys-tem door[s] with a click of the mouse from the soft-ware and view the door status or event log through “System Dashboard.”

• Added panel diagnostics for faster installation and improved troubleshooting of communication and relay status on each module.

Max 3 Module - All transaction events are stored, and system programming decisions are made, in the Max 3 Module. Up to 64 door modules can be networked together per site with virtually unlimited sites.

Secured SeriesTM

Max 3 – The Max 3 cabinet configuration provides the simplest expansion of one to four doors per cabinet when the system needs to be installed in a central location.

Choose the cabinet configuration that best fits the application. Mix and match cabinet configuration in any system for the ultimate in system flexibility.

MiniMax 3 – The MiniMax 3 configuration is ideal for applications where the doors are far apart and/or the control is located at the door.

Max 3

MiniMax 3

To Network or PC

To Network or PC

Secured SeriesTM

Max 3 Access System

Hub Manager Professional “System Dashboard” The latest major feature addition to Hub Manager Professional system software is the “System Dashboard”. This powerful application allows the software operator to view the status of system doors and access system events as they happen. These events are stored in the Max 3 door control module and can be imported for further reporting and historical archive. Another feature of “System Dashboard” is the ability to lock or relock any system door from a PC.

Hardware and Software features

SOFTWARE FEATURES:

• System set up checklist

- Hyperlinked to each step with video tutorial

• Easy to use set up wizard

• System Dashboard- Lock/unlock doors at the PC- View status of each door- View transactions as they occur

• Manage from multiple PC’s

• Customize each operator’s privileges

• Supports Hub Max II; Max 3; prox.pad plus hardwire panels

• Supports communication across network (TCP/IP)

• Auto set up for LAN – dynamic device detection

• Supports serial communication

• Supports wireless IR communications for LS2 Series access control locksets and prox.pad plus IR

• Manage virtually unlimited sites

• Manage multiple device types simultaneously

• Communications troubleshooter feature

• Network query shows hardware type, firmware, and version

• i Update – easily update application automatically

• 20,000 users in the database

• Easily produce management reports

MAX 3 HARDWARE FEATURES:

• Distributed processing

• Network up to 64 doors per site and unlimited sites

• Optional plug on network gateway (SEG-M)

• Support all Wiegand readers

• Card, PIN code, card and/or PIN code

• In and out readers

• Wiegand sounder and LED control

• Support formats up to 40 bits

• Supports Secured Series readers and keypads

• 2000 users per Max 3 module

• Door monitor and request to exit inputs

• Forced door output

• Propped door output

• Alarm Shunt output

• First in auto-unlock

• 2,000 transactions buffered in audit trail

• Diagnostic LED’s for communication and relay status

• Daylight savings time auto update (2007 standard)

Note: For a complete list of system features and functionality, please visit nortekcontrol.com

ORDERING INFORMATION:

Max3 access control system kits( works with certain 125kHz formats and card readers from AWID, HID, XceedID, and Casi/ProxLite)

Max3 SYS

Max 3 single door access control system kit. Contains Max 3 Door Control Module and backplane to support 3 additional Max 3 control modules in oversized metal cabinet with cam lock. Includes XF 1050 proximity reader; Hub Manager Profesional access control soft-ware; 12/24 VDC board power supply for locks; AC Transformer for system and AC transformer for lock power supply.

MiniMax3 SYS

MiniMax 3 single door access control system kit. Includes metal cabinet, cam lock, AC transformer, built-in 12 VDC 1 Amp power supply, Max 3 Door Control Module (DCM). Includes Hub Manager Professional access control software, programming keypad, Includes XF 1050 proximity reader.

Max 3 expansion kits (works with certain 125kHz formats and card readers from HID; AWID; XceedID; Casi ProxLite)

Max3Mod EXMax 3 Module single door access control kit for system expansion. Plugs into Max 3 backplane to expand system capacity one door at a time. Contains Max 3 Door Control Module and Includes XF 1050 proximity reader.

Max 3 panel options (Reader purchased separately)

Max3 Max 3 single door access control panel. Contains Max 3 Door Control Module and Hub Man-ager Professional software.

MiniMax3 MiniMax 3 single door access control panel. Includes Max 3 Door Control Module (DCM), built-in 12 VDC 2.5 Amp power supply, Hub Manager Professional software.

Max3Mod Max 3 Module single door access control module. Plugs into Max 3 backplane to expand sys-tem capacity one door at a time.

Note: All Max 3 systems require a communication module [optional RS232-485 converter, USB - serial converter, or SEG-M a TCP/IP Secure Ethernet Gateway Module.

The industry’s only single door access control system kits. We have pre-packaged the Max3 and MiniMax3 into system kits that include the Max 3 door control module, Hub Manager Professional software, proximity reader, and power supplies for the access system and a lock device. The grid below is the available configurations.

© 2015 Nortek Security & Control LLC. All Rights Reserved 1950 Camino Vida Roble, Suite 150 • Carlsbad CA 92008 • 760.438.7000 • 760.800.421.1587nortekcontrol.com P/N 229659B X1

OVERVIEW:The IEI Max 3 Output Module (M3-OM) adds 8 form C control relay outputs to a Max 3 Module. The module enables Secured Series customers to handle a greater number of applications such as elevator control, handi-capped door control, and controlling or triggering a camera or DVR upon a card read or PIN code.

Version 8.0 or higher of Hub Manager Professional Soft-ware is required for the Output Module. The Output Module is compatible with the Max 3 v2 or higher controller.

Using the Max 3 Output Module will allow you to control multiple outputs for each Max 3 system user from any given reader or keypad. Hub Manager Professional software will allow you to specify a custom name and timer value for each of the 8 outputs. Each output can be set to toggle, or for timed operation. Any combination of these outputs can be assigned to a user and the user will trigger these outputs when they gain access.

The Max 3 Output Module installs into and is powered from the Max 3 module. For faster installation and troubleshoot-ing, each Output Module includes power LED and individ-ual relay status LEDs. The Output Module comes packaged with Hub Manager Professional Software, wire harnesses, and mounting hardware.

Max 3 Output Module

Data SheetSecured SeriesTM

pROduct hIghlIghts:

• Adds 8 form C Control relay outputs to a Max 3 module

• Includes power LED and individual relay status LEDs

• Ability to specify a custom name and timer value for each of the 8 outputs

• Convenient “stackable” mounting to the Max 3 module

• Securely installs in Max 3 and MiniMax 3 cabinet

• Primary and back-up power from Max 3 or MiniMax 3 system

• Plug & Play design

EasE Of InstallatIOn: As with the Max 3 modem, the Max 3 Output Module uses IEI’s new “stack-able” design. The Output Module mounts directly on top of a Max 3 door module. A plug-in wire harness easily connects power and communication between the modules. Removable terminal blocks provide easy connection for each output relay to field wiring. All connections and wiring are secure within the locked Max 3 or MiniMax 3 cabinet.

Max 3 Output Module

spEcIfIcatIOns

Mechanical: 2.90" W x 3.45" L

Environmental: Indoor only

Temperature tolerance: 32° F to 120° F (0° C to 49° C)

Software compatibility: Hub Manager Professional version 8.0 or higher

Controller compatibility: Max 3 v2 controller type or higher

Electrical:

Operating voltage: 12 VDC from Max 3 Control Module

Current draw: 142 mA

Aux Relay Contact Rating: 12 – 24 VAC/DC 1A

System Compatibility: Hub Manager Professional Version 8.0 (or higher)

ORdERIng InfORmatIOn:

marketing # description

m3-Om

Adds 8 form C control relay outputs to Max 3 module for applications such as elevator control. Installs onto and is powered from Max 3 module. Includes power LED and individual relay status LEDs. System requirements: Software must be Hub Manager Professional v 8.0 or higher. Package includes soft-ware, wire harnesses, and mounting hardware.

Secured SeriesTM

1950 Camino Vida Roble, Ste 150Carlsbad, CA 92008 T 781.821.5566 F 781.821.4443 Toll Free: 800.421.1587www.ieib.com P/N 229666 X1

OVERVIEWUse this guide to list the equipment needed for a one to eight door Secured Series access system using Max 3 access control system kits. The system kits come with software and include – for each door - Max 3 or MiniMax 3 controller, mini mullion proximity reader (works with certain HID 125 kHz formats and card readers from HID and AWID), system power supply and transformer, and power supply and transformer for the door lock hardware. Separately order lock hardware, door monitor, REX and other accessories as

STEP TWO – SELECT PROXIMITY CREDENTIALSFor each SYSTEM, select the brand and type of proximity credential for each system user.

Type/Brand HID p/n AWID p/n

Clamshell ProxCardII CS26S

Key Fob ProxKey KT26S

Graphic Quality ISOprox GR26S

STEP ONE – SELECT COMMUNICATION ACCESSORYFor each SYSTEM, select at least one communication accessory – a way to connect the control[s] to the PC. Choose from the following three options:

Option #1 - For direct connection to PC - enable communication to controllers from a single PC – p/n USB-Serial.

Option # 2 - Plug on Secure Ethernet Gateway – enable communication across an IP network. Manage from any PC on the network on which the software is installed – p/n SEG-M.

Option # 3 - Plug on modem module for dial up remote site applications – enable communication across telephone lines from PC on which the software is installed - p/n M3M

Secured Series Access SystemsGuide to Building a Max 3 System


STEP THREE – SELECT CONTROL EQUIPMENTFor each DOOR, select a cabinet configuration: Max 3 or MiniMax 3. Mix and match cabinet configurations

within each SYSTEM as needed to simplify wiring.

The Max 3 cabinet configuration provides the simplest expansion one to four doors when the system

needs to be installed in a central location.

The MiniMax 3 cabinet configuration is ideal for applications where the doors are far apart and/or the

control is located at the door.

1 Door SystemOption # 1 - Max 3 Cabinet Configuration - Controller/ reader/power

1 Max3SYS - Comes with proximity reader as well as power for both panel and locks.

Option # 2 - MiniMax 3 Cabinet Configuration - Controller/ reader/power

1 MiniMax3SYS - Comes with proximity reader as well as power for both panel and locks.

2 Door SystemOption # 1 - Max 3 Cabinet Configuration - Controller/ reader/power

1 Max3SYS Comes with proximity reader as well as power for both panel and locks.

PLUS

1 Max3ModEX - Door control module, comes with proximity reader.



1 Do

or S

yste

m2

Door

Sys

tem


3 Door System

Option # 1 - Max 3 Cabinet Configuration - Controller/ reader/power


PLUS




4 Door System



PLUS




5 Door System



PLUS




3 Do

or S

yste

m4

Door

Sys

tem

5 Do

or S

yste

m


Contact Customer Support for assistance designing Secured Series Access Control Systems. Customer Support can be reached at (800) 421-1587

6 Door System



PLUS




7 Door System



PLUS




8 Door System



PLUS




6 Do

or S

yste

m7

Door

Sys

tem

8 Do

or S

yste

m

© 2015 Nortek Security & Control LLC. All Rights Reserved 1950 Camino Vida Roble, Suite 150 • Carlsbad CA 92008 • 760.438.7000 • 760.800.421.1587nortekcontrol.com P/N 229980A X1

Everything you need to know to build a basic e3 Access Control in less than a minute.

One-Door System A One (1) ES-1MB1 1-Door, 1-Mullion Mount Reader Essential Access System Bundle (Part # ES-1MB)B One (1) ProxCard II 25-Pack, 125 kHz, Wiegand Proximity Access Cards (Part # ProxCardII)

A B

1 Includes One (1) 2N1 Reader HAF 125 kHz, HID-Compatible, Proximity Access Card Reader (Part # P-300HA)2 Includes Four (4) 2N1 Reader HAF 125 kHz, HID, AWID and Farpointe compatible, Proximity Access Card Reader (2N1ProxHAF – Item #620-100451)3 Includes Two (2) 2N1 Reader HAF 125 kHz, HID, AWID and Farpointe compatible, Proximity Access Card Reader (2N1ProxHAF – Item #620-100451)

A One (1) ES-1MB1 1-Door, 1-Mullion Mount Reader Essential Access System Bundle (Part # ES-1MB)B One (1) ES-1DLB1 Single Door License with Reader Bundle (Part # ES-1DLB)C One (1) ProxCard II 25-Pack, 125 kHz, Wiegand Proximity Access Cards (Part # ProxCardII)

A B C

Two-Door System

Three-Door System

Four-Door System

A One (1) ES-1MB1 1-Door, 1-Mullion Mount Reader Essential Access System Bundle (Part # ES-1MB)B Two (2) ES-1DLB1 Single Door License with Reader Bundle (Part # ES-1DLB)C One (1) ProxCard II 25-Pack, 125 kHz, Wiegand Proximity Access Cards (Part # ProxCardII)

A B C

BECOME A 60 SECOND E3 EXPERT

A One (1) ES-4MB2 4-Door, 4-Mullion Mount Reader Essential Access System Bundle (Part # ES-4MB)B One (1) ProxCard II 25-Pack, 125 kHz, Wiegand Proximity Access Cards (Part # ProxCardII)

A B

A One (1) EL36-4MB2 4-Door, 4-Reader Elite Access System Bundle (Part # EL36-4MB)B One (1) ACM2DB3 2-Door, 2-Reader ACM with Reader Bundle (Part # ACM2DB); ACM mounts

inside either the ES or EL standard metal enclosureC One (1) ProxCard II 25-Pack, 125 kHz, Wiegand Proximity Access Cards (Part # ProxCardII)

A B C

Six-Door System

A One (1) EL36-4MB2 4-Door, 4-Reader Elite Access System Bundle (Part # EL36-4MB)B One (1) ACM4DB2 4-Door, 4-Reader Access System Bundle (Part # ACM4DB); ACM mounts inside

either the ES or EL standard metal enclosureC One (1) ProxCard II 25-Pack, 125 kHz, Wiegand Proximity Access Cards (Part # ProxCardII)

A B C

Eight-Door System

A One (1) EL36-4MB2 4-Door, 4-Reader Elite Access System Bundle (Part # EL36-4MB)B One (1) EXN-2MB3 2-Door, 2-Reader Access System Expansion Bundle (Part # EXN-2MB)C One (1) ACM4DB2 4-Door, 4-Reader Access Control Module Bundle (Part # ACM4DB); ACM

mounts inside either the ES or EL standard metal enclosureD One (1) ProxCard II 25-Pack, 125 kHz, Wiegand Proximity Access Cards (Part # ProxCardII)

A B C D

Ten-Door System

1 Includes One (1) 2N1 Reader HAF 125 kHz, HID-Compatible, Proximity Access Card Reader (Part # P-300HA)2 Includes Four (4) 2N1 Reader HAF 125 kHz, HID, AWID and Farpointe compatible, Proximity Access Card Reader (2N1ProxHAF – Item #620-100451)3 Includes Two (2) 2N1 Reader HAF 125 kHz, HID, AWID and Farpointe compatible, Proximity Access Card Reader (2N1ProxHAF – Item #620-100451)

Copyright © 2017 Nortek Security & Control LLC. All rights reserved. GoControl is a registered trademark of Linear LLC. All other product names/marks of others are the property of their respective owners. Made in China. Specifications and product availability subject to change without notice. Connect with us today—NortekControl.com or 1.800.421.1587.

Nortek Security & Control | 1950 Camino Vida Roble | Suite 150 | Carlsbad, CA 92008 | 800.421.1587 | linear-solutions.com

P/N 236022B

NORTEK - s3.amazonaws.com · Linear’s 2-N-1 reader is a proximity reader designed to fulfill two...

Documents

Transcript of NORTEK - s3.amazonaws.com · Linear’s 2-N-1 reader is a proximity reader designed to fulfill two...