Newsco International Energy Services Inc. Newsco’s Safety and Training Program Presented by Klaus...
-
Upload
marsha-rice -
Category
Documents
-
view
216 -
download
1
Transcript of Newsco International Energy Services Inc. Newsco’s Safety and Training Program Presented by Klaus...
Newsco International Energy Services Inc.
Newsco’s Safety and Training Program
Presented by Klaus Rimke
Global Safety & Training Coordinator HSSE Manager
www.newsco.ca
group company
Presentation Outline
I. Introduction to Newsco Training System
II. Standards required
III. Training methodology
IV. Mission Statement
V. Online LMS implementation requirements
VI. Accreditations and Certifications
www.newsco.ca
group company
Newsco’s Safety and Training program
Newsco International Energy Services is a Global Company therefore:
www.newsco.ca
group company
Newsco’s Safety and Training program
Safety standards
Training standards
Processes & procedures
Verification and conformance must be standardized to ensure our global footprint is the same regardless of where work is being done.
www.newsco.ca
group company
Newsco’s Safety and Training program
NEWSCO Training Structure
Training(safety and job competency)
Theoretical Knowledge and skills
Practical (Hands on training with
verification.)
Certification
Requirements:
IADC RigPass/S
afeGulfIRP 16, COR,
ISNWORLD
Implementation costs
Upgrades and improvements
www.newsco.ca
group company
Newsco’s Safety and Training program
“Mission Statement”
To create a comprehensive e-learning program consisting of theoretical & practical training with a method of verification created to document compliance and understanding by the employees.
www.newsco.ca
group company
Newsco’s Safety and Training program
The Oil and Gas industry, in particular the many service industries are not regulated by set standards such as found in the Automotive, Construction, and Medical field where a governmental standard with approved training curriculums are established throughout Colleges and Universities issuing licences and diplomas.
www.newsco.ca
group company
Newsco’s Safety and Training program
Therefore a comprehensive Apprenticeship for the company specific job descriptions was needed to meet the following goals:
• Leading industry standards for MWD, DD operators, Lab Technicians and Office personnel
• Online certification for Rig Pass & Safe Gulf for our global operations
• 100% Compliance to all owner clients in ISNetworld• Exceeding Certificate of Recognition (COR) by
maintaining an average audit of over 90%• Meet all requirements for IRP-16
www.newsco.ca
group company
Newsco’s Safety and Training program
Building TLM Database Process(The Learning Matrix) is the name chosen to describe the structured matrix at Newsco International Energy Services.
Before putting a system together the company must examine each job description by task and required skills by a pre-determined level requirement. Once the basic structure has been determined as to who does what, when, and how. A lesson plan for each skill / task can be written or videoed covering that specific training agenda. These lessons are then are then combined or grouped into a training module to cover the theoretical information being instructed, a question base is then added to test module covering the theoretical knowledge and retention of the employee, (ensure there are enough questions in the data base to ensure the main points are covered and that a random number of questions can be drawn upon to allow for variation of each test to prevent questions from being copied and passed around)
www.newsco.ca
group company
Newsco’s Safety and Training program
International Association of Drilling Contractors (IADC )
IADC is the basis of where the safety program was derived from with the base safety curriculum coming from the RIGPASS® Program.
Newsco is RIGPASS with Offshore endorsement certified. It has expanded to include the SafeGulf® Certification for possible work
in the Gulf of Mexico and possibly any environmentally sensitive area in the US continental shelf
www.newsco.ca
group company
Newsco’s Safety and Training program
International Association of Drilling Contractors (IADC )
To meet these requirements there are certain parameter's dictated by IADC, they are:1. Prior to taking the Course there are two documents that need to be signed and read.2. Student must be verified to be who they say they are 3. Complete currently external courses in First Aid, H2s, Fall protection, WHMIS, TDG.
i. These courses are covered in the on-line program and hopefully if and when allowed can certified and have a IADC certification card issued through IADC for Internationally approved verification. (My Goal is to discuss this with IADC in February after the IADC Conference.)
4. Students must meet the minimum required 90% for Safe Gulf and 80 % for Rig Pass qualification and
5. Instructors need to be approved in the IADC program and trained.
www.newsco.ca
group company
Newsco’s Safety and Training program
Certificate of Recognition (COR)
COR Certification is certified through Enform expires every 3 years with
2 Yearly Maintenance audits and 1 compliance audit
Minimum Pass 80% Newsco Maintains an above 90% for the
last 3 years, which as resulted in i. Reduced Workers Compensation
Payments (WCB) as seen in the premium rate statement (53.61% lower than industry average)
ii. IRP16 (Industry recommended Practices) Certified and Verified through the COR Audit (is an additional requirement from some clients)
www.newsco.ca
group company
Newsco’s Safety and Training program
One has to remember that meeting and exceeding any regulatory requirement requires proof of compliance through documentation and demonstration of commitment from the entire company from the top down. This cannot be done through the use of e-learning or hands on training alone, but further requires a change in the safety culture within the company and the industry itself.
The Basic Safety Protocol's (BSP) changed in 2011, Industry average scores dropped by at least 10-15% (Red line above indicates the minimum requirement to pass the COR audit) Newsco maintained above 90% for the last 3 years.
www.newsco.ca
group company
Newsco’s Safety and Training program
ISNetworld Compliance
Since 2009 Newsco has gone from 2-7 owner clients and has maintained a 100% compliance with all of them
www.newsco.ca
group company
Newsco’s Safety and Training program
Summary:Safety and Training are only one area needed to maintain our high standards, World Class equipment requires world class operators.
Documentation and verification further covers the due diligence of our company in ensuring the safety and welfare of our employees.
The added benefits of meeting and exceeding regulatory requirements will be seen in savings in WCB payments, plus helps the sales department set us apart from our competition and the fact that If, in the case of an OHS incident, it cannot be proven that a worker was competent or that everything "reasonably practicable" was done to ensure a worker’s competence, the organization may be charged and held liable under applicable OHS Law, including potential criminal prosecution.”