NDT Course Prospectus

en

ASNT NDT Level II Program

Ultrasonic Testing

Radiographic Testing

Magnetic Particle Testing

Dye Penetrant Testing

20 December – 20 January' 2014

Prospectus

Organized by:

Industrial Inspection & Training Services (IITS)

Industrial Inspection & Training Services (IITS) House 162, Road 11, DOHS Mirpur, Dhaka Cantonment, Dhaka 1216 Cell: 01913303031, email: [email protected], web: www.iitsbd.com

Intro to NDT

Nondestructive testing or Non-destructive testing (NDT) is a wide group of analysis techniques

used in science and industry to evaluate the properties of a material, component or system without

causing damage. NDT is used in a variety of settings that covers a wide range of industrial activity,

with new NDT methods and applications, being continuously developed. Non-destructive testing

methods are routinely applied in industries where a failure of a component would cause significant

hazard or economic loss, such as in transportation, pressure vessels, building structures, piping,

and hoisting equipment. NDT can be used to:

Accident prevention & to reduce costs

To improve product reliability

To determine acceptance to a given equipment

To give information on repair criteria

To ensure structural integrity

Prevent accidents to save human life and environment

To minimize unscheduled plant shutdown

To reduce wastage of line and material by controlling manufacturing process

Details of the course

Course standard ASNT (American Society for Non Destructive Testing) SNT-TC-1A.

Methods Ultrasonic Test (UT), Radiography Test (RT), Magnetic Particle Test (MT), Penetrant Test (PT).

Duration of course 200 hours (UT-80hrs, RT-80 hrs, MT-20 hrs, PT-20 hrs).

Method of course Both theory (explaining, demonstrating & collaborating) and practical.

Learning assistive Special training videos thru projector screen.

Practical execution In-house and out-house*. (* out-house depends on availability)

Course suitable for

Personnel such as Engineers, Inspectors, Surveyors, QA/QC managers, Production Engineer, Technicians who required a thorough and comprehensive knowledge of NDT method basics, applications, practically using of the method, condition monitoring can attend the course.


Sectors that uses NDT:

NDT contractors Quality Control and Quality Assurance Mechanical Construction Motor vehicles manufacturing Steel structures/buildings Aircraft Water craft Power stations Gas and oil sectors Refineries Fertilizer factories Aerospace Aviation Construction Manufacturing Railroad Alternative Energy: Nuclear, Wind, Solar etc.

Courses Contents:

1. UT Level-I (40 hrs):

1.1 Introduction

1.2 Basic Principal of Acoustic

1.3 Equipment

1.4 Basic Testing Method

1.5 Testing Method (Contact, Immersion & Comparison of Method)

1.6 Calibration (Electronic & Functional)

1.7 Straight Beam Examination to Specific Procedure

1.8 Angle Beam Examination to Specific Procedure

2. UT Level-II (40 hrs.)

2.1 Review of Ultrasonic Technique Course

2.2 Evaluation of Base Material Product

2.3 Evaluation of Weldments

2.4 Evaluation of bonded structures

2.5 Discontinuity detection

2.6 Evaluation


3. RT Level-I (40 hours)

3.1 Personnel Monitoring

3.2 Survey instrument

3.3 Leak testing and sealed radioactive sources

3.4 Radiation survey reports

3.5 Radiographic work practices

3.6 Exposure device

3.7 State and federal regulations

4. RT Level-II (40 hours)

4.1 Radiographic viewing

4.2 Application techniques

4.3 Evaluation of casting

4.4 Evaluation of weldments

4.5 Standards, codes and procedures for radiography

4.6 Review of basic radiography principles

4.7 Darkroom facilities, technique and processing

4.8 Identification, discontinuities and defects

4.9 Manufacturing processing and associated defects

4.10 Radiation safety principles review

5. MT Level-I & II (24 hours)

5.1 Principles of magnets and magnetic fields

5.2 Characteristics of magnetic fields

5.3 Magnetization by means of electrical current

5.4 Selecting the proper method of magnetization

5.5 Inspection material

5.6 Principle of demagnetization

5.7 Magnetic particle testing equipment

5.8 Type of discontinuities detected by Magnetic Particle Testing

5.9 Magnetic Particle Test indications and interpretations

5.10 Flux field

5.11 Effects of discontinuities on materials

5.12 Longitudinal Technique

5.13 Selecting the proper method of magnetization

5.14 Demagnetization procedure

5.15 Evaluation techniques

5.16 Quality control of equipment and processes


6. PT Level-I & II (20 Hour)

6.1 Introduction

6.2 Liquid Penetrant Processing

6.3 Various Penetrant Testing Methods

6.4 Liquid Penetrant Processing

6.5 Review of PT Level-I

6.6 Selection of the Appropriate Penetrant Testing Method

6.7 Inspection & evaluation of Indications

6.8 Inspection Standards and Procedures

Eligibility for Examination:

ASNT has no restrictions relative to the gender, creed, race or nationality of applicants.

Applicants shall document the combination of education and experience in accordance with

the Level II guidelines published in Recommended Practice No. SNT-TC-1A.

The Candidate shall agree to abide by the code of ethics for ASNT Level II personnel.

Examination Grading:

The grading of qualification examinations shall be done by ASNT Level-III certified personnel in accordance with SNT-TC-1A regulations.

At IITS, We bring in every aspect of training. Our purpose is not just to impart knowledge,

but to handhold and help our students understand and apply what they learn.

Guideline of Application:

Interested applicants should submit the enrolment form along with course fee (cheque or cash), passport size 6 copy of passport size photograph, copies of certificates, experience certificate etc. The application should be sent to the following address before the closing date:

Md. Safiq Uddin Technical Manager Industrial Inspection & Training Services (IITS) House 162, Road 11, DOHS Mirpur, Dhaka cantonment, Dhaka-1216 Cell: -01913303031 Venue:

Industrial Inspection & Training Services (IITS) House 162, Road 11, DOHS Mirpur, Dhaka cantonment Dhaka-1216


Application Deadline: The last date of application is

10 December' 2014 Course fee and payment

Course fee should be paid along with the enrolment form in 100& full advance. Any candidate has to apply for minimum 02 courses. Although, IITS strongly recommend to attend the "All courses package". The course fee is as below:

Course Fees

Radiographic Testing (RT) Level-II 18,000.00 [Taka eighteen thousand only]

Ultrasonic Testing (UT) Level-II 18,000.00 [Taka eighteen thousand only]

Magnetic Particle Testing (MT) Level-II 10,000.00 [Taka ten thousand only]

Dye Penetrant Testing (PT) Level-II 10,000.00[Taka ten thousand only]

All course package 48,000.00 [Forty eight thousand only] Above fees does not include any tax/vat Fees are excluding of any kinds of T/A, D/A, Foods, Kitchen amenities. Fees do not include any kinds of accidental or incidental demurrage of property or personnel during travel to or from course.

Upcoming course:

CSWIP 3.1 certified welding inspector. Please visit www.iitsbd.com or ask: 01913-303031.

NDT Course Prospectus

Documents

Transcript of NDT Course Prospectus