Mobile User Manual - DVR
-
Upload
roger-ricardo-rukat -
Category
Documents
-
view
232 -
download
0
Transcript of Mobile User Manual - DVR
-
7/31/2019 Mobile User Manual - DVR
1/13
Mobile Surveillance User Manual
-
7/31/2019 Mobile User Manual - DVR
2/13
Mobile Surveillance User Manual
CONTANTCONTANTCONTANTCONTANT
1. System Introduction .... .. . ... 31.1 Overview .... .. . . 3
1.2 Operating Environment .... . ... 3
2. Operation Instruction .. ..... . .. 3
2.1 DVR Setting .... .. .. .. 3
2.1.1 Code Setting ..... .. . . 3
2.1.2 User Account.
....
..
. 4
2.2 Mobile Setting .... ... .... 4
2.2.1 Android systems ... ... ... .... . 4
2.2.2 Blackberry systems .... ... .. . 7
2.2.3 Iphone systems .... . .. .. ... 8
2.2.4 Symbian mobile .... .. ... . .10
2.2.5 Windows mobile .... .. .. . . 12
1
-
7/31/2019 Mobile User Manual - DVR
3/13
Mobile Surveillance User Manual
Chapter I System Introduction 1.1 Overview
Main functions
Real time video viewing from Mobile device
PTZ control for device with PTZ function1.2 Operating Environment
Support mobile operation system for Android 1.5or higher;
Support mobile operation system for BlackBerry 4.6;
Support mobile operation system for iPhone 3.1.2 or higher;
Support mobile operation system for Symbian 3.0 or Symbian 5.0;
Support mobile operation system for Windows Mobile 5.0 or higher
Enable the Sub Stream on the linked device
H264 compression
Chapter II Operation InstructionOperation set is divided into two parts, one side is for the DVR side Seting in the DVR main
menu, and the other part was done on the Mobile Side.
2.1 DVR SettingSet up the encoding system to accommodate mobile phone surveillance. (The mobile
phones streaming quality is proportional to network quality).
Setup can be completed by WEB log-in or DVR setup. The following instruction is for DVR
setup.
Note To ensure that mobile viewer wont affect the video quality of your DVR, only sub
stream is used by the mobile phone .
2.1.1 Code setup
2
-
7/31/2019 Mobile User Manual - DVR
4/13
-
7/31/2019 Mobile User Manual - DVR
5/13
Mobile Surveillance User Manual
1) InstallPlease refer to the mobile phone device User Manual on how to install the software
Step1 Download the mobile phone synchronization software "HTCSync.exe ", and install to
your computer
Step2 Connect the phone to a computer
Step3 Double click the icon applied VS500 to the phone
2) UninstallOpen Menu Settings Applications Manage applications VS500 SelectUninstall.
2.2.1.2 Network Setting
Select Menu Set Wirless & network settings
Please refer to the mobile phone user manual orcontact your network operator
2.2.1.3 Login Select Menu VS500 to run the program, then login.
4
-
7/31/2019 Mobile User Manual - DVR
6/13
Mobile Surveillance User Manual
Input device IP, port number, user name and password, click Login. After successful login,
enter the video selection interface. System will record the last logged IP and other information,
easy for login next timeProblems may occurred: 1: Please check input information is correct 2: Please check
the network connection 3: The equipment is running properly
2.2.1.4 Video Browsing
Button:
Return: back to system interface, close all the video
channel
Exit: exit the system
Open the video channel
Click the video channel by direction key or touch screen
Open the video channel and into the system interface
2.2.1.5 Video Channel Button
Video Switch to Video channel
Full Switch to full screen when video browsing
About View Software version et
Exit Exit programPTZ Control
Click "up / down" and "left / right"
switch in both directions, left and right button for
command operation
Click Zoom in / out and iris + / - ,
Focus + / - left and right button for command
operation
Full screen instructions
Click the video window or click the full screenbutton to switch to full-screen interface, click the video
5
-
7/31/2019 Mobile User Manual - DVR
7/13
Mobile Surveillance User Manual
window again to return In full screen mode, the arrow keys can control PTZ
2.2.1.5 Exit: Press the Exit key to exit the system.2.2.2 Blackberry systems2.2.2.1 Install / Uninstall1) Install
Please refer to the mobile phone device User Manual, use synchronization software, and
install to your computer
Step1 Download the mobile phone synchronization software "BSync.exe", and install to
your computer
Step2 Connect the phone to a computer
Step3 Double click the icon applied VS500 to the phone
2) UninstallOpen Menu Settings Applications Manage applications VS500 Select Uninstall.
2.2.2.2 Network Setting
Select Menu Manage Connections Please
refer to the mobile phone user manual or
contact your network operator
2.2.2.3 Login
Select Menu Downloads VS500 to run
the program, then login.
Input device IP, port number, user name
and password, click Login. After successful
login, enter the video selection interface.
System will record the last logged IP and other
information, easy for login next time
6
-
7/31/2019 Mobile User Manual - DVR
8/13
Mobile Surveillance User Manual
Select Menu VS500 to run the program, then login.
Problems may occurred 1: Please check input information is correct 2: Please check the
network connection 3: The equipment is running properly
2.2.2.4 Video BrowsingReturn: back to system interface, close all thevideo channel
Exit: exit the system
Open the video channel
Click the video channel by direction key or touch
screen
Open the video channel and into the system
interface
2.2.2.5 Video ChannelVideo Switch to Video channel
Full Switch to full screen when video browsing
About View Software version et
Exit Exit program
PTZ Control
Click "up / down" and "left
/ right" switch in both directions, left and right
button for command operation
Click Zoom in / out and
iris + / - , Focus + / - left and right button for command operation
Full screen instructions Click the video window or click the full screen button to switch to
full-screen interface, click the video window again to return In full screen mode, the arrow keys
can control PTZ
2.2.2.6 Set
RTSP port equal with the device default is554
Stream Type Setting the stream type
2.2.2.7 ExitPress the Exit key to exit the system.
2.2.3 Iphone systems2.2.3.1 Install
7
-
7/31/2019 Mobile User Manual - DVR
9/13
Mobile Surveillance User Manual
Please refer to the mobile phone device User Manual on how to install the software
Step1 Download the mobile phone synchronization software "iTunes.exe", and install to
your computer
Step2 Connect the phone to a computer
Step3 Double click the icon applied VS500 to the phone
2.2.3.2 UninstallTouch the VS500 icon for a while, when the icon shaking and appears symbol, click to remove.
2.2.3.2 LoginSelect VS500 to run the program, then login (as image shows below). Input device IP, port
number, user name and password, click Login. After successful login, enter the video selection
interface. System will record the last logged IP and other information, easy for login next time
Problems may occurred:1: Please check input information is correct; 2:Please check the
network connection; 3: The equipment is running properly
Start Login
2.2.3.3 Video Browsing
Button:
Return back to system interface, close all the video
channel
Open the video channel
Click the video channel by direction key or touch screen
Open the video channel and into the system interface.
8
-
7/31/2019 Mobile User Manual - DVR
10/13
Mobile Surveillance User Manual
2.2.3.4 Video ChannelButton:
Login Switch to Login
Video Switch to Video channel
Camera Switch to Camera ListFull Switch to full screen when video browsing
PTZ Control
Click "up / down" and "left / right"
switch in both directions, left and right button for
command operation
Click Zoom in / out and iris + /
- , Focus + / - left and right button for command
operation
Full screen instructions Click the video window or
click the full screen button to switch to full-screen
interface, click the video window again to return
2.2.3.5 ExitPress the Home to exit the system.
2.2.4 Symbian mobile
2.2.4.1 InstallNote
VS500 (Symbian) V1.01.0.sisx, there are 3 S60 OpenC database in the install package,
please click continue when installation, will take half a minute for whole installation.
1) Download the mobile phone synchronization software e.g.:N85
Nokia_PC_Suite_7_1_26_0_chi_sc_web.exe .
2) Before installation please set the mobile phone:
Select Menu Settings Applications App.manager
Set Software installation is All Online certificate check is Off3) Download the VS500(Symbian)V1.01.0.sisx to computer. Connect mobile phone via
data cable. Double-click the program, follow the installation wizard to complete
installation
Note: You can also copy the file to the phone to complete the installation
2.2.4.2 UninstallSelect Menu Installations App.mgr. Installed apps. VS500 SelectUninstall
2.2.4.3 Login
9
-
7/31/2019 Mobile User Manual - DVR
11/13
-
7/31/2019 Mobile User Manual - DVR
12/13
Mobile Surveillance User Manual
the video window again to return In full screen mode, the arrow keys can control PTZ
2.2.4.6 ExitPress the Exit key to exit the system.
2.2.5 Windows mobile
2.2.5.1 InstallCopy the filevs500Setup.cab to the phone use the PC mobile phone synchronization
software or net download, follow the images as below . Double-click the program follow the
installation wizard to complete installation
Install Install completed
2.2.5.2 loginSelect Start->Programs click the icon, to run the program, then login.
11
-
7/31/2019 Mobile User Manual - DVR
13/13
Mobile Surveillance User Manual
Menu Login
Input device IP, port number, user name and password, click Login. After successful login,
enter the video selection interface. System will record the last logged IP and other information,
easy for login next time
Problems may occurred 1 Please check input information is correct 2 Please check thenetwork connection 3 The equipment is running properly
2.2.5.3 Video BrowsingAfter login select any Chanel to open the video
Full screen instructions Click the video window or click the full screen button to switch to
full-screen interface, click the video window again to
return
Video channel Video
2.2.5.4 PTZ Control Click "up / down" and "left / right" switch in both directions, left and right
button for command operation
Click Zoom in / out and iris + / - , Focus + / - left and right button forcommand operation
2.2.5.5 ExitClick the button in red area to exit the system
12