Meshing of a detailed DrivAer Body with ANSYS Meshing and ...
Meshing Curve Surface With Lusas
-
Upload
shamsukarim2009 -
Category
Documents
-
view
216 -
download
0
Transcript of Meshing Curve Surface With Lusas
-
7/31/2019 Meshing Curve Surface With Lusas
1/4
-
7/31/2019 Meshing Curve Surface With Lusas
2/4
Select the created surface with ur mouse and the surface will be darkened as shown below
Select the mesh settings on the left side with ur mouse and ensure that the surface has beenlselected (still dark), drag and drop the mesh 4 x 4 to the darkened surface.
The surface will be meshed by 4 divison and 4 division in perpendicular direction.
-
7/31/2019 Meshing Curve Surface With Lusas
3/4
Using this mesh scheme, u may see that the curvy portion of the original shape was not connectedby curvy lines...but in order to increase ur accuracy, u need to use finer mesh .
Select the whole surface and right click and pick copy. Under copy dialog box, pick rotate and inputthe angle to be 90 degrees (-ve rotation) and input the origin of the rotation to be x =0, y=0, z=0
Change the number of copied surface to be 3 times and click OK
-
7/31/2019 Meshing Curve Surface With Lusas
4/4
Walla. You just created a 3D circular shape with 4 x 4 mesh in each quadrant.
Regards
Syahrul Fithry Senin
UiTM Penang