Kirchheimunter Teck

Reutlingen

Ulm

Stuttgart

Metzingen

Sindelfingen

BAD URACH

SINGEN

MEMMINGEN

KARLSRUHEPFORZHEIM

HEILBRONN

MÜNCHEN

FEUCHTWANGEN

A7

A8

B28

B10

B27

A81

Heidenheim

Göppingen

Tübingen

Leonberg

Nürtingen

Grabenstetten

Böhringen

HÜLBEN Merklingen

PRECISION INJECTIONMOULDING

SINCE 1957

Gustav Magenwirth GmbH & Co. KGBusiness Unit CompositeUracher Straße 27 · D-72584 Hülben, Germanyphone +49 (0)7125 9694 410 · fax +49 (0)7125 9694 443kunststoff@magura.de · www.kunststoff.magura.com MAGURA COMPOSITE

» Established: 1893» Headquarters: 72574 Bad Urach, Germany» Family Enterprise currently in the fourth management generation» Turnover (consolidated): 113.0 million Euro (2016)» 575 Employees (2016) Synergy effects within the group» International procurement» Electronic assemblies» Hydraulic applications

» Established: 1957» Injection moulding machines with handling systems» Tool clamping force range from 125 kN to 3,200 kN» In-house mould, tool and assembly equipment design and manufacture» 100 Employees (2016)

Specialisation» Technical injection moulded parts and ready-to-install assemblies» Full thermoplastic material range» Multi-component technology (hard / soft and hard / hard / soft)» Micro-injection moulding currently with a minimum part weight of 0.01 g» Metal insert parts» Thermoplastic elastomer components (combined plastic and rubber technology)

MAGURA COMPOSITE

MAGURACORPORATE GROUP

MAGURA COMPOSITE

2017

/ 03

Kirchheimunter Teck

Reutlingen

Ulm

Stuttgart

Metzingen

Sindelfingen

BAD URACH

SINGEN

MEMMINGEN

KARLSRUHEPFORZHEIM

HEILBRONN

MÜNCHEN

FEUCHTWANGEN

A7

A8

B28

B10

B27

A81

Heidenheim

Göppingen

Tübingen

Leonberg

Nürtingen

Grabenstetten

Böhringen

HÜLBEN Merklingen

PRECISION INJECTIONMOULDING

SINCE 1957

Gustav Magenwirth GmbH & Co. KGBusiness Unit CompositeUracher Straße 27 · D-72584 Hülben, Germanyphone +49 (0)7125 9694 410 · fax +49 (0)7125 9694 443kunststoff@magura.de · www.kunststoff.magura.com MAGURA COMPOSITE

» Established: 1893» Headquarters: 72574 Bad Urach, Germany» Family Enterprise currently in the fourth management generation» Turnover (consolidated): 113.0 million Euro (2016)» 575 Employees (2016) Synergy effects within the group» International procurement» Electronic assemblies» Hydraulic applications

» Established: 1957» Injection moulding machines with handling systems» Tool clamping force range from 125 kN to 3,200 kN» In-house mould, tool and assembly equipment design and manufacture» 100 Employees (2016)

Specialisation» Technical injection moulded parts and ready-to-install assemblies» Full thermoplastic material range» Multi-component technology (hard / soft and hard / hard / soft)» Micro-injection moulding currently with a minimum part weight of 0.01 g» Metal insert parts» Thermoplastic elastomer components (combined plastic and rubber technology)

MAGURA COMPOSITE

MAGURACORPORATE GROUP

MAGURA COMPOSITE

2017

/ 03

Kirchheimunter Teck

Reutlingen

Ulm

Stuttgart

Metzingen

Sindelfingen

BAD URACH

SINGEN

MEMMINGEN

KARLSRUHEPFORZHEIM

HEILBRONN

MÜNCHEN

FEUCHTWANGEN

A7

A8

B28

B10

B27

A81

Heidenheim

Göppingen

Tübingen

Leonberg

Nürtingen

Grabenstetten

Böhringen

HÜLBEN Merklingen

PRECISION INJECTIONMOULDING

SINCE 1957

Gustav Magenwirth GmbH & Co. KGBusiness Unit CompositeUracher Straße 27 · D-72584 Hülben, Germanyphone +49 (0)7125 9694 410 · fax +49 (0)7125 9694 443kunststoff@magura.de · www.kunststoff.magura.com MAGURA COMPOSITE

» Established: 1893» Headquarters: 72574 Bad Urach, Germany» Family Enterprise currently in the fourth management generation» Turnover (consolidated): 113.0 million Euro (2016)» 575 Employees (2016) Synergy effects within the group» International procurement» Electronic assemblies» Hydraulic applications

» Established: 1957» Injection moulding machines with handling systems» Tool clamping force range from 125 kN to 3,200 kN» In-house mould, tool and assembly equipment design and manufacture» 100 Employees (2016)

Specialisation» Technical injection moulded parts and ready-to-install assemblies» Full thermoplastic material range» Multi-component technology (hard / soft and hard / hard / soft)» Micro-injection moulding currently with a minimum part weight of 0.01 g» Metal insert parts» Thermoplastic elastomer components (combined plastic and rubber technology)

MAGURA COMPOSITE

MAGURACORPORATE GROUP

MAGURA COMPOSITE

2017

/ 03

05 14 14

15

1413

1511 1515

0706

1212

08

10

0902

03 04

01

YOUR TRUST

01 Sketch02 Decades of know-how in plastics correct design, in accordance with DIN 16742 (Top Level: -TG2)03 Quotation for unit pricing with tooling and assembly costs and full project schedule04 Mould fill simulation / FEM calculation (if necessary)05 Functional injected prototypes in serial material YOUR SATISFACTION

YOUR IDEA YOUR REQUIREMENT YOUR SOLUTION PARTNER

MAGURA COMPOSITE

JOINT CONSULTINGDEVELOPMENTSOLUTION FINDING

06 Design and production of injection moulding tooling and equipment managed fully in-house or optionally together with a designated project partner07 Individual project assistance with regular status reports08 Reliable project planning09 Initial sample release-procedure / PPAP according to VDA standard10 Series production with quality documentation according to inspection and test procedures11 Top Level: 6-axis robots and camera observation systems controlling the process12 Specialists in insert and multi-component technology Networked archiving of process data (production control station)

13 Multi-component assembly injection moulding14 Multipart assembly and post production processing as required15 Customer-focused global logistics

ASSEMBLY LOGISTICS

QUALITY AND PRECISION SINCE 1957» Full in-house design and development know-how (plastic technology) and within the corporate group (hydraulic, electronic and mechanical know-how)» Material selection according to application conditions; know-how and experience with material development if required» Expertise based on long-term company affiliation and qualification of the staff» Production of demands up to >30 million pieces per year » Short delivery time for prototypes, manufactured from series materials» Certified according to VDA 6.1, ISO 9001:2008 and ISO 14001» Direct availability and quick response of contact staff in sales, development, production and quality assurance

PROJECT MANAGEMENTSERIES PRODUCTION2 3 41

05 14 14

15

1413

1511 1515

0706

1212

08

10

0902

03 04

01

YOUR TRUST

01 Sketch02 Decades of know-how in plastics correct design, in accordance with DIN 16742 (Top Level: -TG2)03 Quotation for unit pricing with tooling and assembly costs and full project schedule04 Mould fill simulation / FEM calculation (if necessary)05 Functional injected prototypes in serial material YOUR SATISFACTION

YOUR IDEA YOUR REQUIREMENT YOUR SOLUTION PARTNER

MAGURA COMPOSITE

JOINT CONSULTINGDEVELOPMENTSOLUTION FINDING

06 Design and production of injection moulding tooling and equipment managed fully in-house or optionally together with a designated project partner07 Individual project assistance with regular status reports08 Reliable project planning09 Initial sample release-procedure / PPAP according to VDA standard10 Series production with quality documentation according to inspection and test procedures11 Top Level: 6-axis robots and camera observation systems controlling the process12 Specialists in insert and multi-component technology Networked archiving of process data (production control station)

13 Multi-component assembly injection moulding14 Multipart assembly and post production processing as required15 Customer-focused global logistics

ASSEMBLY LOGISTICS

QUALITY AND PRECISION SINCE 1957» Full in-house design and development know-how (plastic technology) and within the corporate group (hydraulic, electronic and mechanical know-how)» Material selection according to application conditions; know-how and experience with material development if required» Expertise based on long-term company affiliation and qualification of the staff» Production of demands up to >30 million pieces per year » Short delivery time for prototypes, manufactured from series materials» Certified according to VDA 6.1, ISO 9001:2008 and ISO 14001» Direct availability and quick response of contact staff in sales, development, production and quality assurance

PROJECT MANAGEMENTSERIES PRODUCTION2 3 41

05 14 14

15

1413

1511 1515

0706

1212

08

10

0902

03 04

01

YOUR TRUST

01 Sketch02 Decades of know-how in plastics correct design, in accordance with DIN 16742 (Top Level: -TG2)03 Quotation for unit pricing with tooling and assembly costs and full project schedule04 Mould fill simulation / FEM calculation (if necessary)05 Functional injected prototypes in serial material YOUR SATISFACTION

YOUR IDEA YOUR REQUIREMENT YOUR SOLUTION PARTNER

MAGURA COMPOSITE

JOINT CONSULTINGDEVELOPMENTSOLUTION FINDING

06 Design and production of injection moulding tooling and equipment managed fully in-house or optionally together with a designated project partner07 Individual project assistance with regular status reports08 Reliable project planning09 Initial sample release-procedure / PPAP according to VDA standard10 Series production with quality documentation according to inspection and test procedures11 Top Level: 6-axis robots and camera observation systems controlling the process12 Specialists in insert and multi-component technology Networked archiving of process data (production control station)

13 Multi-component assembly injection moulding14 Multipart assembly and post production processing as required15 Customer-focused global logistics

ASSEMBLY LOGISTICS

QUALITY AND PRECISION SINCE 1957» Full in-house design and development know-how (plastic technology) and within the corporate group (hydraulic, electronic and mechanical know-how)» Material selection according to application conditions; know-how and experience with material development if required» Expertise based on long-term company affiliation and qualification of the staff» Production of demands up to >30 million pieces per year » Short delivery time for prototypes, manufactured from series materials» Certified according to VDA 6.1, ISO 9001:2008 and ISO 14001» Direct availability and quick response of contact staff in sales, development, production and quality assurance

PROJECT MANAGEMENTSERIES PRODUCTION2 3 41

05 14 14

15

1413

1511 1515

0706

1212

08

10

0902

03 04

01

YOUR TRUST

01 Sketch02 Decades of know-how in plastics correct design, in accordance with DIN 16742 (Top Level: -TG2)03 Quotation for unit pricing with tooling and assembly costs and full project schedule04 Mould fill simulation / FEM calculation (if necessary)05 Functional injected prototypes in serial material YOUR SATISFACTION

YOUR IDEA YOUR REQUIREMENT YOUR SOLUTION PARTNER

MAGURA COMPOSITE

JOINT CONSULTINGDEVELOPMENTSOLUTION FINDING

06 Design and production of injection moulding tooling and equipment managed fully in-house or optionally together with a designated project partner07 Individual project assistance with regular status reports08 Reliable project planning09 Initial sample release-procedure / PPAP according to VDA standard10 Series production with quality documentation according to inspection and test procedures11 Top Level: 6-axis robots and camera observation systems controlling the process12 Specialists in insert and multi-component technology Networked archiving of process data (production control station)

13 Multi-component assembly injection moulding14 Multipart assembly and post production processing as required15 Customer-focused global logistics

ASSEMBLY LOGISTICS

QUALITY AND PRECISION SINCE 1957» Full in-house design and development know-how (plastic technology) and within the corporate group (hydraulic, electronic and mechanical know-how)» Material selection according to application conditions; know-how and experience with material development if required» Expertise based on long-term company affiliation and qualification of the staff» Production of demands up to >30 million pieces per year » Short delivery time for prototypes, manufactured from series materials» Certified according to VDA 6.1, ISO 9001:2008 and ISO 14001» Direct availability and quick response of contact staff in sales, development, production and quality assurance

PROJECT MANAGEMENTSERIES PRODUCTION2 3 41

Kirchheimunter Teck

Reutlingen

Ulm

Stuttgart

Metzingen

Sindelfingen

BAD URACH

SINGEN

MEMMINGEN

KARLSRUHEPFORZHEIM

HEILBRONN

MÜNCHEN

FEUCHTWANGEN

A7

A8

B28

B10

B27

A81

Heidenheim

Göppingen

Tübingen

Leonberg

Nürtingen

Grabenstetten

Böhringen

HÜLBEN Merklingen

PRECISION INJECTIONMOULDING

SINCE 1957

Gustav Magenwirth GmbH & Co. KGBusiness Unit CompositeUracher Straße 27 · D-72584 Hülben, Germanyphone +49 (0)7125 9694 410 · fax +49 (0)7125 9694 443kunststoff@magura.de · www.kunststoff.magura.com MAGURA COMPOSITE

» Established: 1893» Headquarters: 72574 Bad Urach, Germany» Family Enterprise currently in the fourth management generation» Turnover (consolidated): 113.0 million Euro (2016)» 575 Employees (2016) Synergy effects within the group» International procurement» Electronic assemblies» Hydraulic applications

» Established: 1957» Injection moulding machines with handling systems» Tool clamping force range from 125 kN to 3,200 kN» In-house mould, tool and assembly equipment design and manufacture» 100 Employees (2016)

Specialisation» Technical injection moulded parts and ready-to-install assemblies» Full thermoplastic material range» Multi-component technology (hard / soft and hard / hard / soft)» Micro-injection moulding currently with a minimum part weight of 0.01 g» Metal insert parts» Thermoplastic elastomer components (combined plastic and rubber technology)

MAGURA COMPOSITE

MAGURACORPORATE GROUP

MAGURA COMPOSITE

2017

/ 03