List of Codes & Standards

8/10/2019 List of Codes & Standards

1/28

EM 385-1-115 Sep 08

APPENDIX S

REFERENCES AND RESOURCES

SECTION A. REFERENCES

1. NUMBERED PUBLICATIONS

ACI 347 Guide to Formwork for Concrete

ANSI 01.1 Woodworking Machinery

ANSI A10.3 Safety Requirements for Powder- Activated Fastening Systems

ANSI A10.4 Safety Requirements for PersonnelHoists and Employee Elevators forConstruction and DemolitionOperations

ANSI A10.5 Safety Requirement for Material Hoists

ANSI A10.6 Safety Requirements for Demolition

ANSI A10.7 Safety Requirements for CommercialExplosives and Blasting Agents

ANSI A10.8 Safety Requirements for Scaffolding

ANSI A10.22 Safety Requirements for Rope-Guidedand Non Guided Workers Hoists

ANSI A10.34 Protection of the Public on or Adjacentto Construction Sites

ANSI A14.1 Ladders Wood SafetyRequirements

S-1


2/28

EM 3851-115 Sep 08

ANSI A14.2 Ladders Portable Metal Safety

Requirements

ANSI A14.3 -2008 Ladders Fixed SafetyRequirements

ANSI A14.4 Safety Requirements for Job MadeWooden Ladders

ANSI B74.2 Specifications for Shapes and Sizes ofGrinding Wheels, and for Shapes andSizes and Identifications of Mounted

Wheels

ANSI C95.4 Radio Frequency Antennas WhenUsing Electric Blasting Caps DuringExplosive Operations

ANSI D6.1 Manual on Uniform Traffic ControlDevices for Streets and Highways

ANSI Z41 Personnel Protection ProtectiveFootwear

ANSI Z80.3 Requirements for NonprescriptionSunglasses and Fashion Eyewear

ANSI Z88.2 Practices for Respiratory Protection

ANSI Z89.1 Personal Protection - ProtectiveHeadwear for Industrial Workers

ANSI Z117.1 Confined Spaces

ANSI Z136.1 Safe Use of Lasers ANSI Z244.1 Personnel Protection

Lockout/Tagout of Energy Sources

S-2


3/28

EM 385-1-115 Sep 08

ANSI Z308.1 Minimum Requirements for Workplace

First Aid Kits ANSI Z358.1 Emergency Eyewash and Shower

Equipment

ANSI Z490.1 Accepted Practices for Safety, Healthand Environmental Training

ANSI Z535.1 Safety Color Code

ANSI Z535.2 Environmental and Facility Safety

Signs ANSI Z535.5 Accident Prevention Tags (for

temporary hazards)

ANSI/ACDE-01 Divers Commercial Diver Training Minimum Standard

ANSI/AGA GPTC GPTC Guide for the Gas TransmissionZ380.1 and Distribution Piping System

ANSI/API 2C Specification for Offshore Cranes ANSI/ASME A13.1 Scheme for the Identification of Piping

Systems

ANSI/ASME A17.1 Safety Code for Elevators andEscalators

ANSI/ASME B30.2 Overhead and Gantry Cranes, TopRunning Bridge, Single or MultipleGirder, Top Running Trolley Hoist

ANSI/ASME B30.3 Construction Tower Cranes

ANSI/ASME B30.4 Portal, Tower, and Pedestal Cranes

S-3


4/28

EM 3851-115 Sep 08

ANSI/ASME B30.5 Mobile and Locomotive Cranes

ANSI/ASME B30.6 Derricks

ANSI/ASME B30.8 Floating Cranes and Floating Derricks

ANSI/ASME B30.9 Slings

ANSI/ASME B30.10 Hooks

ANSI/ASME B30.11 Monorails and Underhung Cranes

ANSI/ASME B30.12 Handling Loads Suspended fromRotorcraft

ANSI/ASME B30.17 Overhead and Gantry Cranes (TopRunning Bridge, Single Girder,Underhung Hoist)

ANSI/ASME B30.22 Articulating Boom Cranes

ANSI/ASME B30.26 Rigging Hardware

ANSI/ASME B31.1 Power Piping

ANSI/ASME B56.1 Safety Standard for Low Lift and HighLift Trucks

ANSI/ASSE A10.38 Basic Elements of an EmployersProgram to Provide a Safe andHealthful Work Environment

ANSI/ASSE A10.44 Control of Energy Sources(Lockout/Tagout) for Construction and

Demolition

S-4


5/28

EM 385-1-115 Sep 08

ANSI/ASSE Z87.1 Practice for Occupational and

EducationalEye and Face Protection

ANSI/ASSE Z359 Fall Protection Code

ANSI/ASSE Z359.0 Definitions and Nomenclature Used forFall Protection and Fall Arrest

ANSI/ASSE Z359.1 Safety Requirements for Personal Fall Arrest Systems, Subsystems andComponents

ANSI/ASSE Z359.2 Minimum Requirements for aComprehensive Managed FallProtection Program

ANSI/ASSE Z359.3 Safety Requirements for Positioningand Travel Restraint Systems

ANSI/ASSE Z359.4 Safety Requirements for Assisted-Rescue and Self-Rescue systems,Subsystems and Components

ANSI/AWS D1.0 Code for Welding in BuildingConstruction

ANSI/AWS D1.1 Structural Welding Code - Steel

ANSI/AWS F4.1 Recommended Safe Practices forPreparation for Welding and Cutting ofContainers and Piping

ANSI/AWS Z49.1 Safety in Welding, Cutting and AlliedProcesses

ANSI/IEEE C95.2 Standard for Radio Frequency Energyand Current Flow Symbols

S-5


6/28

EM 3851-115 Sep 08

ANSI/IESNA RP-1 Practice for Office Lighting

ANSI/IESNA RP-8 Roadway Lighting ANSI Approved

ANSI/IESNA RP-12 Marine Lighting

ANSI/ISEA 105 Hand Protection Selection Criteria

ANSI/ISEA 107 High Visibility Safety Apparel

ANSI/SIA A92.2 Vehicle-Mounted Elevating andRotating Aerial Devices

ANSI/SIA A92.3 Manually Propelled Elevating AerialPlatforms

ANSI/SIA A92.5 Boom-supported Elevated WorkingPlatforms

ANSI/SIA A92.6 Self-Propelled Elevating WorkPlatforms

ANSI/UL 1313 Nonmetallic Safety Cans for Petroleum

Products

AR 11-9 The Army Radiation Safety Program

AR 11-34 The Army Respiratory ProtectionProgram

AR 40-5 Preventive Medicine

AR 95 Series Aviation

AR 200-1 Environmental Protection andEnhancement

AR 385-10 The Army Safety Program

S-6


7/28

EM 385-1-115 Sep 08

AR 385-11 Ionizing Radiation Protection

AR 385-40 Accident Reporting and Records

AR 385-55 Prevention of Motor Vehicle Accidents

AR 700-136 Tactical Land Based Water ResourcesManagement in ContingencyOperations

ASCE 7-98 Guide to the Use of Wind LoadProvisions

ASTM D120 Standard Specification for RubberInsulating Gloves

ASTM D1051 Standard Specification for RubberInsulating Sleeves

ASTM F496 Standard Specification for In-ServiceCare of Insulating Gloves and Sleeves

ASTM F696 Standard Specification for Leather

Protectors for Rubber InsulatingGloves and Mittens

ASTM F852 Standard Specification for PortableGasoline Containers for ConsumerUse

ASTM F976 Standard Specification for PortableKerosine Containers for ConsumerUse

ASTM F1117 Standard Specification for DielectricOvershoe Footwear

S-7


8/28

EM 3851-115 Sep 08

ASTM F1166 Standard Practice for Human

Engineering Design for MarineSystems, Equipment and Facilities

ASTM F1236 Standard Guide for Visual Inspectionof Electrical Protective RubberProducts

ASTM F1506 Standard Performance Specificationfor Flame Resistant Textile Materialsfor Wearing Apparel for Use byElectrical Workers Exposed to

Momentary Electric Arc and RelatedThermal Hazards

ASTM F1897 Standard Specification for LegProtection for Chain Saw Users

ASTM F2412 Standard Test Methods for FootProtection

ASTM F2413 Standard Specification forPerformance Requirements for Foot

ProtectionCGA C6 Standard for Visual Inspection of Steel

Compressed Gas Cylinders

CGA C8 Standard for Requalification of DOT-3HT, CTC-3HT, and TC-3HTMSeamless Steel Cylinders

CGA G7.1 Commodity Specification for Air

CMAA 70 Multiple Girder Electric OverheadTraveling Cranes

S-8


9/28

EM 385-1-115 Sep 08

DDESB TP No. 18 Minimum Qualifications for UXO

Technicians and Personnel, Dec 2004DFARS Subpart Drug-Free Work Force

252.223-7004

DOD 6055.09-STD DOD Ammunition and ExplosivesSafety Standards, Feb 08

DODI 4715.5-G Overseas Environmental BaselineGuidance Document

DODI 6055.1 DOD Safety and Occupational HealthProgram

DODI 6055.3 Hearing Conservation

DODI 6055.12 DOD Hearing Conservation Program

EM 385-1-97 Munitions and Explosives Response Actions

EO 12196 Occupational Safety and HealthPrograms for Federal Employees

EP 75-1-2 Unexploded Ordnance (UXO) SupportDuring Hazardous, Toxic andRadioactive Waste (HTRW) andConstruction Activities

EP 75-1-3 Recovered Chemical Warfare Materiel(RCWM) Responses

EP 310-1-6A Sign Standards Manual, Volume 1

EP 310-1-6B Sign Standards Manual, Volume 2

S-9


10/28

EM 3851-115 Sep 08

EP 385-1-95a Basic Safety Concepts and

Considerations for OE Operations

EP 385-1-95b Explosives Safety Submissions

EP 1130-2-500 Inspection and Certification Agreement Appendix L Between USACE andUSCG

EP 1130-2-540 Project Operations and EnvironmentalStewardship Operations andMaintenance Guidance and

ProceduresER 95-1-1 Control and Use of Aircraft

ER 385-1-6 Standard Color and Markings forHardhats

ER 385-1-91 Training, Testing, and Licensing ofBoat Operators

ER 385-1-95 Safety and Health Requirements for

Munitions and Explosives of Concern(MEC) Operations

FAR Clause 52.236-13 Accident Prevention

Federal Aviation General Operating and Flight RulesRegulation 91

Federal Aviation Rotorcraft External-Load OperationsRegulation 133

Federal Aviation Operating Requirements: CommuterRegulation 135 and On DemandOperations and Rules GoverningPersons On Board Such Aircraft

S-10


11/28


12/28

EM 3851-115 Sep 08

NFPA 51 Standard Design and Installation of

Oxygen-Fuel Gas Systems forWelding, Cutting, and Allied Processes

NFPA 58 Liquefied Petroleum Gas Code

NFPA 70E Standard for Electrical SafetyRequirements for EmployeeWorkplaces

NFPA 101 Life Safety Code

NFPA 241 Safeguarding Construction, Alteration,and Demolition Operations

NFPA 295 Wildfire Control

NFPA 302 Pleasure and Commercial Motor Craft

NFPA 327 Cleaning or Safeguarding Small Tanksand Containers without Entry

NFPA 386 Portable Shipping Tanks for

Flammable and Combustible Liquids

NFPA 1977 Protective Clothing and Equipment forWildland Fire Fighting

NIST Voluntary Product American Softwood Lumber StandardStandard DOC PS 20

Power Crane and DraglinesShovel AssociationStandard No. 4

SAE J167 Overhead Protection for AgriculturalTractors - Test Procedures andPerformance Requirements

S-12


13/28


14/28


15/28


16/28

EM 3851-115 Sep 08

29 CFR 1910.141 Sanitation

29 CFR 1910.145 Specifications for Accident PreventionSigns and Tags

29 CFR 1910.146 Permit-Required Confined Spaces

29 CFR 1910.155 Scope, Application and Definitions Applicable to Subpart L

29 CFR 1910.178 Powered Industrial Trucks

29 CFR 1910.213 Woodworking MachineryRequirements

29 CFR 1910.219 Mechanical Power-Transmission Apparatus

29 CFR 1910.1000 Air contaminants

29 CFR 1910.1000 Mineral DustsTable Z-3

29 CFR 1910.1001 Asbestos

29 CFR 1910.1020 Access to Employee Exposure andMedical Records

29 CFR 1910.1025 Lead

29 CFR 1910.1030 Bloodborne Pathogens

29 CFR 1910.1096 Ionizing Radiation

29 CFR 1910.1200 Hazard Communication

29 CFR 1915 Occupational Safety and HealthStandards for Shipyard Employment

S-16


17/28

EM 385-1-115 Sep 08

29 CFR 1915 Confined and Enclosed Spaces for

Subpart B Other Dangerous Atmospheres in Shipyard Employment

29 CFR 1918.66 Cranes and Derricks Other ThanVessels Gear

29 CFR 1926 Safety and Health Regulations forConstruction

29 CFR 1926 Excavations Subpart P

29 CFR 1926 Steel Erection Subpart R29 CFR 1926 Blasting and the Use of Explosives

Subpart U

29 CRF 1926.35 Employee Emergency Action Plans

29 CFR 1926.59 Hazard Communication

29 CFR 1926.62 Lead

29 CFR 1926.64 Process Safety Management of HighlyHazardous Chemicals

29 CFR 1926.65 Hazardous Waste Operations andEmergency Response

29 CFR 1926.754 Structural Steel Assembly

29 CFR 1926.803 Compressed Air

29 CFR 1926.1101 Asbestos

29 CFR 1960 Basic Program Elements for FederalEmployees OSHA

S-17


18/28


19/28

EM 385-1-115 Sep 08

40 CFR Protection of Environment

40 CFR 61 National Emission Standard forSubpart M Asbestos

40 CFR 141 National Primary Drinking WaterRegulations

40 CFR 143 National Secondary Drinking WaterRegulations

40 CFR 302 Designation, Reportable Quantities,

and Notification42 CFR Public Health

42 CFR 84 Approval of Respiratory ProtectiveDevices

46 CFR Shipping

46 CFR 25.30-15 Fixed Fire Extinguishing Systems

46 CFR 45.115 Bulwarks and Guardrails

46 CFR 58.50-10 Diesel Fuel Tanks

46 CFR 64 Marine Portable Tanks and CargoHandling Systems

46 CFR 98.30 Handling and Storage of PortableTanks

46 CFR 160 Lifesaving Equipment

46 CFR 173 Special Rules Pertaining to VesselUse

S-19


20/28

EM 3851-115 Sep 08

49 CFR Transportation

49 CFR U.S. DOT Hazardous MaterialsChapter 1 Regulations

49 CFR 171 General Information, Regulations, andDefinitions

49 CFR 172 Hazardous Materials Table, SpecialProvisions, Hazardous MaterialsCommunications, EmergencyResponse Information and Training

Requirements

49 CFR 173 Shipping Container SpecificationRegulations of the Department ofTransportation

49 CFR 174 Carriage by Rail

49 CFR 175 Carriage by Aircraft

49 CFR 176 Carriage by Vessel

49 CFR 177 Carriage by Public Highway

49 CFR 177.835 Class 1 (Explosive) Materials

49 CFR 178 Specifications for Packaging

49 CFR 179 Specifications for Tank Cars

49 CFR 192 Welding of Steel in Pipelines

49 CFR 571 Federal Motor Vehicle SafetyStandards

S-20


21/28

EM 385-1-115 Sep 08

2. UNNUMBERED PUBLICATIONS

ABS, Guide for Certification of Cranes .

ACGIH, Threshold Limit Values and Biological Exposure Indices .

AIHA, Welding Health and Safety: A Field Guide for OEHSProfessionals.

ASME, Boiler and Pressure Vessel Code .

ASME, Code for Unfired Pressure Vessels .

DOT Federal Highway Administration's, Manual on Uniform TrafficControl Devices for Streets and Highways .

ILO International Classification of Radiographs of Pneumoconioses ,most recent edition.

National Classification Committee, National Motor FreightClassification, National Motor Freight Traffic Association,

Alexandria, VA.

NBBI, National Board Inspection Code .NIOSH, Respirator Decision Logic .

NIOSH, Work Practice Guide for Manual Lifting .

Occupational Safety and Health Act of 1970.

Oil Pollution Act of 1990.

Uniform Classification Committee, Uniform Freight Classification ,

National Railroad Freight Committee, Atlanta, GA.United Nations, Recommendations on the Transport of DangerousGoods , United Nations, New York, 1995.

S-21


22/28


23/28


24/28

EM 3851-115 Sep 08

American Society of Safety Engineers (ASSE), 1800 E. Oakton St.,

Des Plaines, IL 60018-2187 ; (847) 699-2929, (847) 768-3434 (fax)

American Society for Testing and Materials (ASTM), 100 BarrHarbor Dr., West Conshohocken, PA 19428-2959; (610) 832-9585,(610) 832-9555 (fax)

American Welding Society (AWS), 550 LeJeune Rd., N.W., MiamiFL 33126; (305) 443-9353, (305) 443-7559 (fax)

Association of Diving Contractors (ADC), 5206 FM 1960 West,Suite 202, Houston, TX 77069; (281) 893-8388, (281) 893-5118

(fax)

Compressed Air and Gas Institute (CAGI), 1300 Sumner Ave.,Cleveland, OH 44115-2851; (216) 241-7333, (216) 241-0105 (fax)

Compressed Gas Association (CGA), 4221 Walney Rd., 5 th Floor,Chantilly, VA 20151-2923; (703) 788-2700, (703) 961-1831 (fax)

Concrete Reinforcing Steel Institute (CRSI), 933 Plum Grove Rd.,Schaumberg, IL 60173; (847) 517-1200, (708) 517-1206 (fax)

Conveyor Equipment Manufacturers Association (CEMA), 6724Lone Oak Blvd, Naples, FL 34109; (239) 514-3441, (239) 514-3470(fax)

Gas Piping Technology Committee (GPTC, ANSI Z380.1), American Gas Association, 400 N. Capitol Street, N.W.,Washington, DC 20001; (202) 824-7000

Grinding Wheel Institute (GWI), 30200 Detroit Rd., Cleveland, OH44115-1967; (216) 899-0010, (216) 892-1404 (fax)

Hardwood Plywood and Veneer Association. 1825 Michael FaradayDr., Reston, VA 20195-0789; (703) 435-2900, (703) 435-2537 (fax)

S-24


25/28

EM 385-1-115 Sep 08

Human Factors and Ergonomics Society, P.O. Box 1369, Santa

Monica, CA 90406-1369; (310) 394-1811, (310) 394-2410 (fax)

Illuminating Engineering Society of North America (IESNA), 120Wall St., Floor 17, New York, NY 10005; (212) 248-500, (212) 248-5017 (fax)

Institute of Electrical and Electronics Engineers (IEEE), 3 Park Ave,17 th Floor, New York, NY 10016-5997; (212) 419-7900, (212) 752-4929 (fax)

Institute of Makers of Explosives (IME), 1120 19th St., N.W., Suite

310, Washington, DC 20036; (202) 429-9280, (202) 293-2420 (fax)International Organization for Standardization, 1, rue de Varemb,Case postale 56, CH-1211 Geneva 20, Switzerland; +41 22 749 0111, +41 22 7333 34 30 (fax)

International Safety Equipment Association, 1901 N. Monroe St., Arlington, VA 22209-1762; (703) 525-1695, (703) 528-2148 (fax)

Material Handling Institute (MHI), 8720 Red Oak Blvd., Suite 201,Charlotte, NC 28217; (704) 676-1190, (704) 676-1199 (fax)

Mine Safety and Health Administration (MSHA), 1100 Wilson Blvd.,21 st Floor, Arlington, VA 22209-3939; (202) 693-9400, (202) 693-9401 (fax)

National Association of Marine Surveyors, P.O. Box 9306,Chesapeake, VA 23321-9306; (757) 488-9538, (757) 488-0584(fax)

National Association of Safe Boating Law Administrator (NASBLA),1500 Leestown Rd., Suite 330, Lexington, KY 40511; (859) 225-9487, (859) 231-6403 (fax)

S-25


26/28

EM 3851-115 Sep 08

National Board of Boiler and Pressure Vessel Inspectors (NBBI),

1055 Crupper Ave., Columbus, OH 43229; (614) 888-8320, (614)888-0750 (fax)

National Bureau of Standards (NBS). See National Institute forStandards and Technology (NIST)

National Electrical Manufacturers Association (NEMA), 1300 N. 17 th St., Suite 1847, Rosslyn, VA, 22209; (703) 841-3200, (703) 841-5900 (fax)

National Fire Protection Association (NFPA), 1 Batterymarch Park,

P.O. Box 9101, Quincy, MA 02169-7471; (617) 770-3000, (617)770-0700 (fax)

National Institute for Occupational Safety and Health, 200Independence Ave, S.W., Rm 715H, Washington, DC 20201;(202) 401-6997

National Institute for Standards and Technology (NIST), 100Bureau Dr., Stop 3460, Gaithersburg, MD 20899-6478; (301) 975-6478, (301) 975-2128 (fax)

National Safety Council (NSC), 1121 Spring Lake Dr., Itasca, IL60143-3201; (630) 285-1121, (630) 285-1315 (fax)

Naval Sea Systems Command (NAVSEA), 1333 Isaac Hull Ave,S.E., Washington Navy Yard, DC 20376; (202) 781-000

Occupational Safety and Health Administration (OSHA), 200Constitution Avenue, NW, Washington, DC 20210; 1-800-321-6742

Power Tool Institute (PTI), 1300 Sumner Ave, Cleveland, OH44115-2851; (216) 241-7333, (216) 241-0105 (fax)

Scaffold Industry Association (SIA), 20335 Ventura Blvd., Suite420, Woodland Hills, CA 91364; (818) 610-0320, (818) 610-0323(fax)

S-26


27/28

EM 385-1-115 Sep 08

Scaffold, Shoring, and Forming Institute (SSFI), 1300 Sumner Ave,

Cleveland, OH 44115-2851; (216) 241-7333, (216) 241-0105 (fax)

Society of Automotive Engineers (SAE), 400 Commonwealth Dr.,Warrendale, PA 15096-0001; (724) 776-4841, (724) 776-0790 (fax)

Underwriters Laboratory (UL). 333 Pfingsten Rd., Northbrook,IL60062; (847) 282-8800, (847) 407-1395 (fax)

United States Government Printing Office (GPO), Superintendent ofDocuments, U.S. Government Printing Office, Washington, DC20402; (202) 512-1530, (202) 512-1262 (fax)

S-27


28/28

List of Codes & Standards

Documents

Transcript of List of Codes & Standards