L2 V4 07 C264 LHMI Configuration E 01

8/20/2019 L2 V4 07 C264 LHMI Configuration E 01

1/20

MiCOM C264 LHMI

Configuration

PCLPCLPCLPCL

PACiSPACiSPACiSPACiS TechnicalTechnicalTechnicalTechnical TrainingTrainingTrainingTraining LevelLevelLevelLevel 2 22 2

CS&PCS&PCS&PCS&P – –– – Support Team Support Team Support Team Support Team


2/20

Schneider Electric 2- CS&P – C264 LHMI Configuration – E01

• Content

GHU Board Configuration

Bitmaps configuration

LCD configuration

LED assignment


3/20


• Content



LCD configuration

LED assignment


4/20


• Configure the GHU board1) C264 with or without LCD => 2 possible GHU boards

2) GHU attributes

HMI Type :- Simple : no LCD and LED#4 is notconfigurable - Complete : LCD, LED#4 is configurable andGHU should be linked to a graphic objecttyped Computer Workspace


5/20


• GHU Board Sons & Relations

Board status MPS

Set of LED :LED#4 not configurable if GHU type = Simple

Relation with graphic configuration :Completed if GHU type = Complete


6/20


• Content



LCD configuration

LED assignment


7/20


• What for?1) On C264 LCD, in bay panels

= > Single Line Diagrams- static objects (lines, bitmaps)- animated objects

2) Graphic table for bitmaps (up to 150)

Note : Starting database is containing bitmap table (IEC)


8/20


• Bitmap Attributes

Short Name :Rule : put bitmap index in prefix

Bitmap index :Bitmap index = bitmap identification used atLCD configuration level

Bitmap type :

-5-uple = animated - single = non-animated


9/20


• Bitmap Representation (1)

Default

Open*

Closed*

Note : bitmap max size = 64x64 pixels

* associatedinformation inClosed/Set orOpen/Reset state


10/20


• Bitmap Representation (2)

Note : withdrawn = combination of DPS position + withdrawn SPS

Default Open Closed Withdrawn

Open

Withdrawn

Closed


11/20


• Content



LCD configuration

LED assignment


12/20


• Add / Configure a Computer Workspace1) Graphic Part / Computer Workspace

2) Attributes

Short Name

L/R password protection :Operator has to enter password when

changing bay control mode (Local/Remote)


13/20


• Add / Configure a Bay Mimic1) Graphic Part / Computer Workspace

2) Attributes

Short Name

MV bargraph :Horizontal / Vertical Advise to not use

Module Name display

3) Relations => relation with the represented bay

Mimic rank :one bay can be represented on 1 or 2mimics


14/20


• Add Graphic Objects in Bay Mimic (1)1) Typical Bay Mimic (128x128 pixels)

Mandatory :- Bay L/R - Interlock bypass (local activation) - Synchrocheck bypass (local activation)

Time :optional

Controllable devices :- LHMI Gen Modules - up to 9 per mimic

Static graphics :lines, single bitmaps

Note : no graphics outside of area => C264 failure


15/20


• Add Animated Objects in Bay Mimic (2)2) Add a LHMI Gen Module

Short Name :different from displayed name

Control availability :Yes = controllable from LCD

3) Configure a LHMI Gen Module

4) LHMI Gen Module Sons

Graphic object with datapoint relationis managed by SPS or DPS

Displayed name4 characters

Representing bitmap index


16/20


• Add Animated Objects in Bay Mimic (3)5) Add a LHMI Transformer

6) LHMI Transformer configuration

Graphic object with TPI relationis managed by TPI

Bitmap index

Minimum, Current and

Maximum TPI valuesare mandatory


17/20


• Content


Bitmaps configurationLCD configuration

LED assignment


18/20


• Reminder1) LED can be animated by SPS or DPS status

13 available LED for Complete HMI12 available LED for Simple HMI (LED#4 = C264 Local/Remote)

LED can be :- Off

- On- Blinking fast- Blinking slow


19/20


• Assign a SPS/DPS to LED1) Under SPS, add the relation “has state displayed on LED”

2) Complete the relation

Complete the relationby selecting LED ofthe GHU board


20/20


• Assign a SPS/DPS to LED3) Configure the relation for behaviour of LED :

LED Behaviour per status :Closed / OPEN / Invalid behaviour Off / On / Blinking Slow / Blinking Fast

Note 1 : 1 LED represents only 1 datapoint

LED Behaviour :- For status - For alarm

LED Behaviour for alarm :

Off / On / Blinking Slow / Blinking Fast

Note 2 : behaviour for alarm will depend on alarm

definition in datapoint profile of this DP.

L2 V4 07 C264 LHMI Configuration E 01

Documents

Transcript of L2 V4 07 C264 LHMI Configuration E 01