KLOECKNER ARCHITECTURAL...(3 kn/m loading to BS 6180) Ready-to-install kit Cost effective system...

KLOECKNER ARCHITECTURAL

1780

ELEGANCE

ARCHITECTURAL SOLUTIONS FOR THE STEEL SECTOR

FAST INSTALLATION

Designed to be installed without the need of

ensuring the fitting surface is totally level.

FULLY ADJUSTABLE AFTER INSTALLATIONE Line uses a unique, simple adjustment system

allowing horizontal alignment of each glass panel.

12mm (toughened glass)

21.5mm (laminated glass)

GLASS THICKNESS

LIGHT WEIGHT & EXTREMELY STRONGFor added protection we anodise our system

increasing protection against the elements.

EXCELLENTLY ENGINEEREDOur system is tested & engineered to meet the

strictest building regulations (with the

appropriate fixing and glass thickness) in both

domestic and commercial installations. It can be

installed in a wide variety of applications.

Fit the base channel (D1) to thesubstructure (Details on suitable fixingcan be found on our website).

Clip the glass slip clamps (D2) to thebottom edge of the glass panel (Weproduce different sized clamps for

different glass thicknesses).Place the bolt screws in the pivotclamp (D3).

Position the glass in the channel.

Using the adjustment bolts; loosening

one side and tightening the other.This will allow the alignment of theglass with the next panel and enableplumbing of the glass.

Attaching the cover strip (D4)and bead gasket (D5).

E LINE IS SO EASY TO INSTALL

E Line is our innovative aluminium railing system

www.kloecknermetalsuk.com

Commercial installationE Line is suitable for many

applications from residential to commercial settings using the same

profiles giving manyadvantages over other

products on the market. These advantages will give

key help to the installerwith quick and easy

product selection and installation.

COMMERCIAL INSTALLATION 3 meter of base drilled kit

CODE SGBE5100 BFALSO AVAILABLE IN 6 METER. PLEASE CONTACT US FOR DETAILS.

E LINE BASE DRILLED KIT COMPRISES OF:1 x 3m Base Drilled Channel2 x 3m Top Clip Bead1 x Clamp kit to suit specified glass thickness1 x Spanner

3 meter of side drilled kit CODE SGBE5101 SF Bottom CladALSO AVAILABLE IN 6 METER. PLEASE CONTACT US FOR DETAILS.E LINE SIDE DRILLED KIT COMPRISES OF:1 x 3m Side Drilled Channel1 x 3m Top Clip Bead1 x 3m Side Cladding1 x Clamp kit to suit specified glass thickness1 x Spanner

E Line is our innovative aluminium railing system

E LINE PARTS & ACCESSORIES

Base Drilled E Line6m ASOL POA

SGBE5100 BFBase Drilled E Line channel. This is the main section that hold the glass. It is predrilled at 100mm from the ends and then 200mm there after. The hole is to suit a 12mm fixing bolt and is counter bored to sink the bolt head.

Side Drilled E Line3m Mill Finish or Satin Annodised6m Available P.O.A

SGBE5101 SF Sided Drilled E Line channel. This is the main section that hold the glass. It is predrilled at 100mm from the ends and then 200mm thereafter. The hole is to suit a 12mm fixing bolt and is counter bored to sink the bolt head. Drilled through both walls.

90° CornerS/S Brushed

SGBE5306 A Pre-fabricated 90° corner. Supplied with four dowels for easier fitting. Does not include extra top seal strip or side cladding.

Top Seal Strip3m S/S Brushed6m Available

SGBE5300 LIGHT

The top seal strip holds the gasket in place and is pressed on to the channel at the end. Covers the clamps from view. Generally two are used with base channel unless otherwise instructed.

Bottom Cladding3m S/S Brushed

SGBE5302 BTM CLADDING

To be used with side fixed channel if chosen. It is angled to lose the square finish of just having channel. Clips into the grooves under the channel.

Side Cladding3m S/S Brushed

SGBE5301 SIDE CLADDING

As with the top seal strip it holds the gasket in place and covers the clamps from view. To be used with side drilled channel to cover the drill holes from view. Requires adhesive to hold flat surface against channel. Some prefer side cladding with base channel as there is no join line.

PRODUCT CODE PRODUCT DESCRIPTION

*All our channel’s are available powder coated P.O.A

A Pre-fabricated 90° corner. Supplied with four dowels for easier fitting. Does not include extra top seal strip or side cladding.

E LINE PARTS & ACCESSORIES

12mm Glass 15mm Glass 17.5mm Glass19mm Glass21.5mm Glass

SGBE 5212 3M KITSGBE 5215SGBE 5217SGBE 5219SGBE 5221

Clamp kits have enough items to suit a 3m length of channel. The clamps can fit glass thicknesses 1mm either way of said glass thickness i.e. 15mm glass clamps will suit 14 - 16mm glass. Included are the clamp bars which sit into the top mold of the clamps and the clamp bolts which screw into the bars and are then undone to hold the glass in place. These are undone and tightened each side allowing the glass alignment.

Gasket1m Large Gasket1m Small Gasket

SGBE 5402 SGBE 5403

Extra gasket can be supplied in any length. The small gasketsuits 19 - 21mm glass, the large gasket suits 12 - 17.5mm glass.

End CapsEnd Cap Base DrilledEnd Cap One Side-Clad

SGBE 5303SGBE 5304

Stainless steel end caps cut to suit each option.An adhesive will need to be used to hold them in place.

Dowel SGBE 5401 DOWEL

The dowels are used to allow for better aligning when joining channel sections together. There are three slots in the channel to hold dowels although two would be enough.

Spanner SGBE 5400 SPANNER

Steel spanner with angle to reach the clamp bolts totighten/loosen the glass.

Drain Block SGBE DRAIN

Aluminium drain block. Can be fitted underneath the channel to allow water to flow more freely out of the channel.

PRODUCT CODE PRODUCT DESCRIPTION

www.kloecknermetalsuk.com

PROFILE DIMENSIONS

FITTING APPLICATIONS

6 BSI with 6180:2011Meets BSI standard 6180:2011.We’ve designed E Line to meetBSi 6180:2011, 1.5kN loading.

Please note these are only fittingsuggestions, E Line should always be fitted to a suitable sub structure, if in

doubt contact a qualified professional.

100 100 100 100

100 200 200 100

11

14

28

14

28

72

111.

511

9.5

A

A

B

B

SIDECLADDINGEXTRUSION

74.5

11

9.5

182

28

57

6

15

BASECLADDINGEXTRUSION

17

PROFILE DIMENSIONS


ELEGANCE SGSTRUCTURAL GLASS BALUSTRADE


Elegance PF Point Fixing

• Tested to BS 6399• Easy to install (3D Adjustment)• Contemporary design• Ex-stock Sheffield

1. Glass tightening screw2. Protective washer3. Protective washer4. Flange(To be fixed with M12)

5. Absorber6. Adjustment pin7. Body8. Threaded back plate(with slot for M12 fixing bolt)

• Residential, offices and retail• Indoor & outdoor• (Available in 304 and 316)• Suitable for 17.5 to 25.5mm glass

Technical Drawings

1100m axi8 00 maxi

1000

260m

ini

10

600m axi

120m

ini

70mini

5

70mini

40 a4 5 70

1000

120

70

260

mini

ø20+0,50

ø24+0,50

V

40 V

ø50

ø50

800m ini

70mini

120m

ini

100

100

H

40

ø50

+-5mm

+-5mm

1 2 3 4 5 6 7 8

Long lasting, lowmaintenance stainlesssteel handrail

Universal range of gasketsto suit toughened &toughened laminated glass

Wedge system for fast& clean installation(no cement required)

Stainless cladding giving

Aluminium base channelfor easy handling

Pre-drilled channel,ready to install

Free standing dry-glazed Balustrade systemSecure & Tested

(3 kn/m loading to BS 6180)

Ready-to-install kit

Cost effective system(reduced labour costs on site)

Modern frameless design

Commercial, residential and public buildings

Indoor and outdoor applications

Suitable for 15, 17.5, 19, 21.5, 25 & 25.5mm glass

Long lasting, lowmaintenance stainlesssteel handrail

Universal range of gasketsto suit toughened &toughened laminated glass

Wedge system for fast& clean installation(no cement required)

Stainless cladding giving

Aluminium base channelfor easy handling

Pre-drilled channel,ready to install

BSI BARRIER LOAD TEST SUMMARY

0.74kN/mGlass 0.8kN/m 1.5kN/m 3kN/m

A15mm

17.5mm EVA

19mm

21.5mm EVA

25mm

25.5mm EVA

(Fischer FII 12/10Sf ixings through 150x150x10support angles &M 12 (10.9) forc hannelt os traps)

(Fischer FII 12/10S+ M12( 10.9) fors upport angles)B15mm

19mm

25mm

C15mm

17.5mm EVA

19mm

21.5mm EVA

25mm

25.5mm EVA

(withM 12 10.9H ex head bolt)

D15mm

19mm

21.5mm EVA

25mm

25.5mm EVA

(withM 12 10.9H ex head bolt)

E15mm

19mm

21.5mm EVA

25mm

(Fischer FII 12/10SF ixings)

F15mm

17.5mm EVA

19mm

21.5mm EVA

25.5mm EVA

(Fischer FII 12/10SF ixings)

G15mm

19mm

(Fischer FHBI IA LM 12x120/10Sf ixings into concrete& 75x75x6 steel straps& M12( 10.9))

STEP 1

STEP 2

Ensure the base channel is plumb and true and that other base channels are aligned.

Use laser or spirit level, shim if required.

Secure the glass by tapping the aluminium wedges into place, using nylon hammer and suitable chisel. Make sure aluminium wedges are fitted against channel wall (4 wedges required per linear meter except for 3KN loading) NB. When fitting the aluminium wedge it is essential after pressing it in firmly by hand that it protrudes by approx.

15-20mm above the top of the alloy shoe channel.

STEP 3Fit handrail to the top of the glass with appropriate gasket and bond stainless steel cladding to the base channel. (All joints to be silicon sealed)

Simple and fast deglazing

The removal tool allows the wedges to be removed with ease. The tool effortlessly removes the aluminium wedges from the shoe allowing quick & easy replacement of damaged or incorrect panes of glass.

Newcastle University

SAS Building, Newcastle

Swindon Academy

Residential Apartment, Cornwall

Simple and fast installation

Newcastle University

SAS Building, Newcastle

Swindon Academy

Residential Apartment, Cornwall

Product

* Specify oneo ft he two options

** Specify grade3 04 or 316(MP) also availablei nm irror polishedP lease consulto ur technical departmentf or 12mmg lass

Wedge pack (4 perp ack)1p ack/lin.m

Satin s/sc ladding (3ml engthfor basec hannel)(also availablei nM P)

Handrail42.4 20x20mm **

Aluminium Shoe0100.BF BaseF ixed 3m length0101.SFS ideF ixed 3m length

Glass Thickness

15mm 17.5mm 19mm 21.5mm 25mm

SGBE-0200.15S GBE-0202.17.5S GBE-0201.19S GBE-0205.21.5S GBE-0203.25 SGBE-0204.25.5

1x SGBE-0300.151x SGBE-0301.19

2x SGBE-0301.192 xS GBE-0301.192 xS GBE-0301.191 xS GBE-0302.251x SGBE-0301.19

foru se with gasket090.42.12

silicon glazed na na na na






na na

Handrail48.3 27x30mm **(also availablei nM P)





siliconeg lazed silicon glazed








25.5mm

ProductGlass Thickness

15mm 17.5mm 19mm 21.5mm 25mm 25.5mm

************

Satin s/se nd cap(also availablei nM P) SGBE-0304.ENDS GBE-0304.ENDS GBE-0304.ENDS GBE-0304.ENDS GBE-0304.ENDS GBE-0304.END

1x SGBE-0302.251x SGBE-0301.19

4

Slotted Tube Fittings

D H

081.42.36 - D: 90 H: 30081.48.36 - D: 95 H: 35

081.48.36 MP - D: 95 H: 35

6H H

H

H

084.42.36 - H: 30084.48.36 - H: 35

82

ø14

12-30 40-80

ø

ø50 ø25

023.42.36023.48.36

12-3060

ø

ø50 ø14

86

024.42.36024.48.36

Offset Glass Fittings

5

G

27

Glazing Gaskets

5

G

24

092.48.15 - G: 15092.48.21 - G: 19-21.5

5

G

35

093.60.15 - G: 15-17.5093.60.19 - G: 19-21.5093.60.25 - G: 21-25.5

Ø60.3

Stainless Steel Tubes and Bars

42.4 x 1.5 (25 x 25 Slot)48.3 x 1.5 (27 x 30 Slot)*60.3 x 1.5 (35 x 34 Slot)

60 x 40 x 1.5(33 x 25 Slot)

80 x 40 x 2(33 x 26.3 Slot)

100 x 40 x 1.5(33 x 26.3 Slot)

* Also available mirror polished ex-stock

Oval

091.42.15 - G: 15091.42.17 - G: 17091.42.19 - G: 19 091.42.21 - G: 21

101.5

64

0100.BF - Pre Drilled - Base0101.SF - Pre Drilled - Side

0200.150201.19

0205.21.5

0203.250204.25.5

0300.15SP0301.19SP0305.21SP0302.25SP

0310.15MP0311.19MP0315.21MP0312.25MP

0304.END SP0314.END MP

94611FDouble sidedadhesive tape

Cladding

TapeEnd cap

SP MP

080.42.36080.48.36

080.48.36 MP080.60.36

082.42.36082.48.36

082.48.36 MP082.60.36

083.42.36 - H: 30083.48.36 - H: 35

083.48.36 MP - H: 35083.60.36 - H: 40

GLAZING TABLE FOR ELEGANCE SG(All items stocked in the UK)

Please find below component list for each glass thickness.

GLAZING SPECIFICATION

101.5

64

0100.BF-P re Drilled- Base0101.SF-P re Drilled - Side

OPTIONS FOR BASIC CHANNEL

OPTIONS FOR HANDRAIL ( SATIN FINISH)

COMPATIBLE FITTINGS FOR SLOTTED HANDRAIL ( END CAP, CONNECTORS, WALL FIXING

ELBOWS

GLASS CLAMPS

END CAPS

ADHESIVE

ENTRUSTED TO DELIVER MULTI-METAL SOLUTIONS

040.420.36040.426.36040.486.36

041.420.36041.426.36041.486.36

030.00.36F030.00.36FMP

047.420.36047.426.36047.486.36

043.420.36043.426.36043.486.36

031.00.36F

044.420.36044.426.36044.486.36

037.42.36037.48.36

045.420.36045.426.36045.486.36

037.00.36F

046.420.36046.426.36046.486.36

032.42.36032.48.36

049.420.36049.426.36049.486.36

032.00.36F

9320

073.420.36073.426.36073.486.36

070.420.36070.426.36070.486.36

031.42.36031.48.36

030.42.36030.48.36

030.48.36MP

INNOVATIVE & SUSTAINABLE ARCHITECTURAL SYSTEMS IN METAL & GLASS

FLOOR BRACKETS / COVERS

SADDLES

WALL BRACKETS

010.420.36010.426.36010.486.36

050.420.36050.426.36050.486.36

011.420.36011.486.36

051.420.36051.426.36051.486.36

052.420.36052.426.36052.486.36

053.420.36053.426.36053.486.36

054.420.36054.426.36054.486.36

055.420.36055.426.36055.486.36

056.420.36056.426.36056.486.36

060.420.36060.426.36060.486.36

061.420.36061.426.36061.486.36

012.420.36012.486.36

020.000.36 021.42.36021.48.36

022.42.36022.48.36

025.42.36025.48.36

026.420.36026.486.36

029.42.36Fixed

029.48.36Fixed

029.42.36.270 Deg

029.48.36.270Deg

KLOECKNER ELEGANCE PR - POST & RAIL FITTINGS PRODUCT KEY

Codee.g.

Itemxxx010

Sizexxx420

Gradexx36

FinishxxMP

420 = 42.4 x 2mm

426 = 42.4 x 2.6mm

486 = 48.3 x 2.6mm

600 = 60.3 x 1.5mm

MP0= Mirror Polish

KLOECKNER ELEGANCE SG E-LINE SYSTEMS

0100.BFN0101.SFN

080.42.36080.48.36

080.48.36MP080.60.36

080.6040.36080.8040.36

5100.BF5101.SF

0200.150201.19

0205.21.50203.25

0204.25.5

081.42.36081.48.36

081.48.36MP

52125215521752195221

0300.150301.19

082.42.36082.48.36

082.48.36MP082.60.36

082.6040.36

083.42.36083.48.36

083.48.36MP083.60.36

083.6040.36

084.42.36084.48.36

5303

End capBase Fixed

End cap Size Fixed

5304

Adjustment Spanner

5400

Dowels

5401

5300 5301 5302

SG SYSTEM

SLOTTED TUBE FITTINGS

E-LINE ACCESSORIES

E-LINE

WWW.KLOECKNERMETALS.CO.UK

00.01.10

42.4 x 2mm42.4 x 2.5mm48.3 x 2mm

48.3 x 2.5mm

42.4 x 1.5(24x24mm slot)

48.3 x 1.5(27x30mm slot)

60.3 x 1.5(35x34mm slot)

60 x 40 x 1.5(24 x 24mm slot)

80 x 40 x 1.5(24 x 24mm slot)

091.42.12-G:12091.42.15-G:15091.42.17-G:17091.42.19-G:19091.42.21-G:21

092.48.10-G:10092.48.12-G:12

092.48.15-G:15-17.5092.48.21-G19-21.5

093.60.15-G:15-17.5093.60.19-G:19-21.5093.60.25-G:21-25.5

094.8040.17-G:17094.8040.19-G:19-21.5

023.42.36023.49.36

024.42.36024.48.36

063.486.36

064.42.36064.48.36

071.42.36071.48.36

071.00.36F071.00.36F 10MM 071.00.36F 20MM071.00.36F 40MM

078.40.36

OFFSET GLASS FITTINGS

STAINLESS STEEL TUBES

GLAZING GASKETS

WWW.KLOECKNERMETALSUK.COM

00.01.10

42.4 x 2mm42.4 x 2.5mm48.3 x 2mm

48.3 x 2.5mm

42.4 x 1.5(24x24mm slot)

48.3 x 1.5(27x30mm slot)

60.3 x 1.5(35x34mm slot)

60 x 40 x 1.5(24 x 24mm slot)

80 x 40 x 1.5(24 x 24mm slot)

091.42.12-G:12091.42.15-G:15091.42.17-G:17091.42.19-G:19091.42.21-G:21

092.48.10-G:10092.48.12-G:12

092.48.15-G:15-17.5092.48.21-G19-21.5

093.60.15-G:15-17.5093.60.19-G:19-21.5093.60.25-G:21-25.5

094.8040.17-G:17094.8040.19-G:19-21.5

023.42.36023.49.36

024.42.36024.48.36

063.486.36

064.42.36064.48.36

071.42.36071.48.36

071.00.36F071.00.36F 10MM 071.00.36F 20MM071.00.36F 40MM

078.40.36

OFFSET GLASS FITTINGS

STAINLESS STEEL TUBES

GLAZING GASKETS

WWW.KLOECKNERMETALSUK.COM

Clearvue Tilt Lock

• All adjustments can be achieved from one side• Allows for glass to be tilted 30 mm back or forward• Aluminum construction available in multi strength glass• Fully engineer tested using 6063T5 anodizing grade• Available in models to suit glass from 12mm to 22.28 mm• Suitable for indoor and outdoor installations• Designed to suit top or side fixed applications• Tilt and Lock strength grades• Tested for use with SGP

Product Features

Clearvue Tilt Lock can be adjusted by hand by one person from one side , simply level by hand and tighten the grub screws once in position for a perfect finish everytime in half the time.

Tilt & Lock

Valley Farm Road, Stourton, Leeds, West Yorkshire, LS10 1SDt: 0113 254 0711 | e: [email protected]

4411

39

Kloeckner Metals UK

6 Park Square, Newton Chambers Road, Thorncliffe Park, Sheffield, S35 2PH t: +44(0)330 333 4247 | e: [email protected]

Kloeckner Metals UK | Architectural

KLOECKNER ARCHITECTURAL...(3 kn/m loading to BS 6180) Ready-to-install kit Cost effective system...

Documents

Transcript of KLOECKNER ARCHITECTURAL...(3 kn/m loading to BS 6180) Ready-to-install kit Cost effective system...