KLOECKNER ARCHITECTURAL
1780
ELEGANCE
ARCHITECTURAL SOLUTIONS FOR THE STEEL SECTOR
FAST INSTALLATION
Designed to be installed without the need of
ensuring the fitting surface is totally level.
FULLY ADJUSTABLE AFTER INSTALLATIONE Line uses a unique, simple adjustment system
allowing horizontal alignment of each glass panel.
12mm (toughened glass)
21.5mm (laminated glass)
GLASS THICKNESS
LIGHT WEIGHT & EXTREMELY STRONGFor added protection we anodise our system
increasing protection against the elements.
EXCELLENTLY ENGINEEREDOur system is tested & engineered to meet the
strictest building regulations (with the
appropriate fixing and glass thickness) in both
domestic and commercial installations. It can be
installed in a wide variety of applications.
Fit the base channel (D1) to thesubstructure (Details on suitable fixingcan be found on our website).
Clip the glass slip clamps (D2) to thebottom edge of the glass panel (Weproduce different sized clamps for
different glass thicknesses).Place the bolt screws in the pivotclamp (D3).
Position the glass in the channel.
Using the adjustment bolts; loosening
one side and tightening the other.This will allow the alignment of theglass with the next panel and enableplumbing of the glass.
Attaching the cover strip (D4)and bead gasket (D5).
E LINE IS SO EASY TO INSTALL
E Line is our innovative aluminium railing system
www.kloecknermetalsuk.com
Commercial installationE Line is suitable for many
applications from residential to commercial settings using the same
profiles giving manyadvantages over other
products on the market. These advantages will give
key help to the installerwith quick and easy
product selection and installation.
COMMERCIAL INSTALLATION 3 meter of base drilled kit
CODE SGBE5100 BFALSO AVAILABLE IN 6 METER. PLEASE CONTACT US FOR DETAILS.
E LINE BASE DRILLED KIT COMPRISES OF:1 x 3m Base Drilled Channel2 x 3m Top Clip Bead1 x Clamp kit to suit specified glass thickness1 x Spanner
3 meter of side drilled kit CODE SGBE5101 SF Bottom CladALSO AVAILABLE IN 6 METER. PLEASE CONTACT US FOR DETAILS.E LINE SIDE DRILLED KIT COMPRISES OF:1 x 3m Side Drilled Channel1 x 3m Top Clip Bead1 x 3m Side Cladding1 x Clamp kit to suit specified glass thickness1 x Spanner
E Line is our innovative aluminium railing system
E LINE PARTS & ACCESSORIES
Base Drilled E Line6m ASOL POA
SGBE5100 BFBase Drilled E Line channel. This is the main section that hold the glass. It is predrilled at 100mm from the ends and then 200mm there after. The hole is to suit a 12mm fixing bolt and is counter bored to sink the bolt head.
Side Drilled E Line3m Mill Finish or Satin Annodised6m Available P.O.A
SGBE5101 SF Sided Drilled E Line channel. This is the main section that hold the glass. It is predrilled at 100mm from the ends and then 200mm thereafter. The hole is to suit a 12mm fixing bolt and is counter bored to sink the bolt head. Drilled through both walls.
90° CornerS/S Brushed
SGBE5306 A Pre-fabricated 90° corner. Supplied with four dowels for easier fitting. Does not include extra top seal strip or side cladding.
Top Seal Strip3m S/S Brushed6m Available
SGBE5300 LIGHT
The top seal strip holds the gasket in place and is pressed on to the channel at the end. Covers the clamps from view. Generally two are used with base channel unless otherwise instructed.
Bottom Cladding3m S/S Brushed
SGBE5302 BTM CLADDING
To be used with side fixed channel if chosen. It is angled to lose the square finish of just having channel. Clips into the grooves under the channel.
Side Cladding3m S/S Brushed
SGBE5301 SIDE CLADDING
As with the top seal strip it holds the gasket in place and covers the clamps from view. To be used with side drilled channel to cover the drill holes from view. Requires adhesive to hold flat surface against channel. Some prefer side cladding with base channel as there is no join line.
PRODUCT CODE PRODUCT DESCRIPTION
*All our channel’s are available powder coated P.O.A
A Pre-fabricated 90° corner. Supplied with four dowels for easier fitting. Does not include extra top seal strip or side cladding.
E LINE PARTS & ACCESSORIES
12mm Glass 15mm Glass 17.5mm Glass19mm Glass21.5mm Glass
SGBE 5212 3M KITSGBE 5215SGBE 5217SGBE 5219SGBE 5221
Clamp kits have enough items to suit a 3m length of channel. The clamps can fit glass thicknesses 1mm either way of said glass thickness i.e. 15mm glass clamps will suit 14 - 16mm glass. Included are the clamp bars which sit into the top mold of the clamps and the clamp bolts which screw into the bars and are then undone to hold the glass in place. These are undone and tightened each side allowing the glass alignment.
Gasket1m Large Gasket1m Small Gasket
SGBE 5402 SGBE 5403
Extra gasket can be supplied in any length. The small gasketsuits 19 - 21mm glass, the large gasket suits 12 - 17.5mm glass.
End CapsEnd Cap Base DrilledEnd Cap One Side-Clad
SGBE 5303SGBE 5304
Stainless steel end caps cut to suit each option.An adhesive will need to be used to hold them in place.
Dowel SGBE 5401 DOWEL
The dowels are used to allow for better aligning when joining channel sections together. There are three slots in the channel to hold dowels although two would be enough.
Spanner SGBE 5400 SPANNER
Steel spanner with angle to reach the clamp bolts totighten/loosen the glass.
Drain Block SGBE DRAIN
Aluminium drain block. Can be fitted underneath the channel to allow water to flow more freely out of the channel.
PRODUCT CODE PRODUCT DESCRIPTION
www.kloecknermetalsuk.com
PROFILE DIMENSIONS
FITTING APPLICATIONS
6 BSI with 6180:2011Meets BSI standard 6180:2011.We’ve designed E Line to meetBSi 6180:2011, 1.5kN loading.
Please note these are only fittingsuggestions, E Line should always be fitted to a suitable sub structure, if in
doubt contact a qualified professional.
100 100 100 100
100 200 200 100
11
14
28
14
28
72
111.
511
9.5
A
A
B
B
SIDECLADDINGEXTRUSION
74.5
11
9.5
182
28
57
6
15
BASECLADDINGEXTRUSION
17
PROFILE DIMENSIONS
KLOECKNER ARCHITECTURAL
ELEGANCE SGSTRUCTURAL GLASS BALUSTRADE
KLOECKNER ARCHITECTURAL
Elegance PF Point Fixing
• Tested to BS 6399• Easy to install (3D Adjustment)• Contemporary design• Ex-stock Sheffield
1. Glass tightening screw2. Protective washer3. Protective washer4. Flange(To be fixed with M12)
5. Absorber6. Adjustment pin7. Body8. Threaded back plate(with slot for M12 fixing bolt)
• Residential, offices and retail• Indoor & outdoor• (Available in 304 and 316)• Suitable for 17.5 to 25.5mm glass
Technical Drawings
1100m axi8 00 maxi
1000
260m
ini
10
600m axi
120m
ini
70mini
5
70mini
40 a4 5 70
1000
120
70
260
mini
ø20+0,50
ø24+0,50
V
40 V
ø50
ø50
800m ini
70mini
120m
ini
100
100
H
40
ø50
+-5mm
+-5mm
1 2 3 4 5 6 7 8
Long lasting, lowmaintenance stainlesssteel handrail
Universal range of gasketsto suit toughened &toughened laminated glass
Wedge system for fast& clean installation(no cement required)
Stainless cladding giving
Aluminium base channelfor easy handling
Pre-drilled channel,ready to install
Free standing dry-glazed Balustrade systemSecure & Tested
(3 kn/m loading to BS 6180)
Ready-to-install kit
Cost effective system(reduced labour costs on site)
Modern frameless design
Commercial, residential and public buildings
Indoor and outdoor applications
Suitable for 15, 17.5, 19, 21.5, 25 & 25.5mm glass
Long lasting, lowmaintenance stainlesssteel handrail
Universal range of gasketsto suit toughened &toughened laminated glass
Wedge system for fast& clean installation(no cement required)
Stainless cladding giving
Aluminium base channelfor easy handling
Pre-drilled channel,ready to install
BSI BARRIER LOAD TEST SUMMARY
0.74kN/mGlass 0.8kN/m 1.5kN/m 3kN/m
A15mm
17.5mm EVA
19mm
21.5mm EVA
25mm
25.5mm EVA
(Fischer FII 12/10Sf ixings through 150x150x10support angles &M 12 (10.9) forc hannelt os traps)
(Fischer FII 12/10S+ M12( 10.9) fors upport angles)B15mm
19mm
25mm
C15mm
17.5mm EVA
19mm
21.5mm EVA
25mm
25.5mm EVA
(withM 12 10.9H ex head bolt)
D15mm
19mm
21.5mm EVA
25mm
25.5mm EVA
(withM 12 10.9H ex head bolt)
E15mm
19mm
21.5mm EVA
25mm
(Fischer FII 12/10SF ixings)
F15mm
17.5mm EVA
19mm
21.5mm EVA
25.5mm EVA
(Fischer FII 12/10SF ixings)
G15mm
19mm
(Fischer FHBI IA LM 12x120/10Sf ixings into concrete& 75x75x6 steel straps& M12( 10.9))
STEP 1
STEP 2
Ensure the base channel is plumb and true and that other base channels are aligned.
Use laser or spirit level, shim if required.
Secure the glass by tapping the aluminium wedges into place, using nylon hammer and suitable chisel. Make sure aluminium wedges are fitted against channel wall (4 wedges required per linear meter except for 3KN loading) NB. When fitting the aluminium wedge it is essential after pressing it in firmly by hand that it protrudes by approx.
15-20mm above the top of the alloy shoe channel.
STEP 3Fit handrail to the top of the glass with appropriate gasket and bond stainless steel cladding to the base channel. (All joints to be silicon sealed)
Simple and fast deglazing
The removal tool allows the wedges to be removed with ease. The tool effortlessly removes the aluminium wedges from the shoe allowing quick & easy replacement of damaged or incorrect panes of glass.
Newcastle University
SAS Building, Newcastle
Swindon Academy
Residential Apartment, Cornwall
Simple and fast installation
Newcastle University
SAS Building, Newcastle
Swindon Academy
Residential Apartment, Cornwall
Product
* Specify oneo ft he two options
** Specify grade3 04 or 316(MP) also availablei nm irror polishedP lease consulto ur technical departmentf or 12mmg lass
Wedge pack (4 perp ack)1p ack/lin.m
Satin s/sc ladding (3ml engthfor basec hannel)(also availablei nM P)
Handrail42.4 20x20mm **
Aluminium Shoe0100.BF BaseF ixed 3m length0101.SFS ideF ixed 3m length
Glass Thickness
15mm 17.5mm 19mm 21.5mm 25mm
SGBE-0200.15S GBE-0202.17.5S GBE-0201.19S GBE-0205.21.5S GBE-0203.25 SGBE-0204.25.5
1x SGBE-0300.151x SGBE-0301.19
2x SGBE-0301.192 xS GBE-0301.192 xS GBE-0301.191 xS GBE-0302.251x SGBE-0301.19
foru se with gasket090.42.12
silicon glazed na na na na
Handrail42.4 24x24mm **
foru se with gasket091.42.15
foru se with gasket091.42.17
foru se with gasket091.42.19
foru se with gasket091.42.21
na na
Handrail48.3 27x30mm **(also availablei nM P)
foru se with gasket092.48.15
foru se with gasket092.48.15
foru se with gasket092.48.21
foru se with gasket092.48.21
siliconeg lazed silicon glazed
Handrail60.3 35x34mm **
foru se with gasket093.60.15
foru se with gasket093.60.15
foru se with gasket093.60.19
foru se with gasket093.60.19
foru se with gasket093.60.25
foru se with gasket093.60.25
25.5mm
ProductGlass Thickness
15mm 17.5mm 19mm 21.5mm 25mm 25.5mm
************
Satin s/se nd cap(also availablei nM P) SGBE-0304.ENDS GBE-0304.ENDS GBE-0304.ENDS GBE-0304.ENDS GBE-0304.ENDS GBE-0304.END
1x SGBE-0302.251x SGBE-0301.19
4
Slotted Tube Fittings
D H
081.42.36 - D: 90 H: 30081.48.36 - D: 95 H: 35
081.48.36 MP - D: 95 H: 35
6H H
H
H
084.42.36 - H: 30084.48.36 - H: 35
82
ø14
12-30 40-80
ø
ø50 ø25
023.42.36023.48.36
12-3060
ø
ø50 ø14
86
024.42.36024.48.36
Offset Glass Fittings
5
G
27
Glazing Gaskets
5
G
24
092.48.15 - G: 15092.48.21 - G: 19-21.5
5
G
35
093.60.15 - G: 15-17.5093.60.19 - G: 19-21.5093.60.25 - G: 21-25.5
Ø60.3
Stainless Steel Tubes and Bars
42.4 x 1.5 (25 x 25 Slot)48.3 x 1.5 (27 x 30 Slot)*60.3 x 1.5 (35 x 34 Slot)
60 x 40 x 1.5(33 x 25 Slot)
80 x 40 x 2(33 x 26.3 Slot)
100 x 40 x 1.5(33 x 26.3 Slot)
* Also available mirror polished ex-stock
Oval
091.42.15 - G: 15091.42.17 - G: 17091.42.19 - G: 19 091.42.21 - G: 21
101.5
64
0100.BF - Pre Drilled - Base0101.SF - Pre Drilled - Side
0200.150201.19
0205.21.5
0203.250204.25.5
0300.15SP0301.19SP0305.21SP0302.25SP
0310.15MP0311.19MP0315.21MP0312.25MP
0304.END SP0314.END MP
94611FDouble sidedadhesive tape
Cladding
TapeEnd cap
SP MP
080.42.36080.48.36
080.48.36 MP080.60.36
082.42.36082.48.36
082.48.36 MP082.60.36
083.42.36 - H: 30083.48.36 - H: 35
083.48.36 MP - H: 35083.60.36 - H: 40
GLAZING TABLE FOR ELEGANCE SG(All items stocked in the UK)
Please find below component list for each glass thickness.
GLAZING SPECIFICATION
101.5
64
0100.BF-P re Drilled- Base0101.SF-P re Drilled - Side
OPTIONS FOR BASIC CHANNEL
OPTIONS FOR HANDRAIL ( SATIN FINISH)
COMPATIBLE FITTINGS FOR SLOTTED HANDRAIL ( END CAP, CONNECTORS, WALL FIXING
ELBOWS
GLASS CLAMPS
END CAPS
ADHESIVE
ENTRUSTED TO DELIVER MULTI-METAL SOLUTIONS
040.420.36040.426.36040.486.36
041.420.36041.426.36041.486.36
030.00.36F030.00.36FMP
047.420.36047.426.36047.486.36
043.420.36043.426.36043.486.36
031.00.36F
044.420.36044.426.36044.486.36
037.42.36037.48.36
045.420.36045.426.36045.486.36
037.00.36F
046.420.36046.426.36046.486.36
032.42.36032.48.36
049.420.36049.426.36049.486.36
032.00.36F
9320
073.420.36073.426.36073.486.36
070.420.36070.426.36070.486.36
031.42.36031.48.36
030.42.36030.48.36
030.48.36MP
INNOVATIVE & SUSTAINABLE ARCHITECTURAL SYSTEMS IN METAL & GLASS
FLOOR BRACKETS / COVERS
SADDLES
WALL BRACKETS
010.420.36010.426.36010.486.36
050.420.36050.426.36050.486.36
011.420.36011.486.36
051.420.36051.426.36051.486.36
052.420.36052.426.36052.486.36
053.420.36053.426.36053.486.36
054.420.36054.426.36054.486.36
055.420.36055.426.36055.486.36
056.420.36056.426.36056.486.36
060.420.36060.426.36060.486.36
061.420.36061.426.36061.486.36
012.420.36012.486.36
020.000.36 021.42.36021.48.36
022.42.36022.48.36
025.42.36025.48.36
026.420.36026.486.36
029.42.36Fixed
029.48.36Fixed
029.42.36.270 Deg
029.48.36.270Deg
KLOECKNER ELEGANCE PR - POST & RAIL FITTINGS PRODUCT KEY
Codee.g.
Itemxxx010
Sizexxx420
Gradexx36
FinishxxMP
420 = 42.4 x 2mm
426 = 42.4 x 2.6mm
486 = 48.3 x 2.6mm
600 = 60.3 x 1.5mm
MP0= Mirror Polish
ELBOWS
GLASS CLAMPS
END CAPS
ADHESIVE
ENTRUSTED TO DELIVER MULTI-METAL SOLUTIONS
040.420.36040.426.36040.486.36
041.420.36041.426.36041.486.36
030.00.36F030.00.36FMP
047.420.36047.426.36047.486.36
043.420.36043.426.36043.486.36
031.00.36F
044.420.36044.426.36044.486.36
037.42.36037.48.36
045.420.36045.426.36045.486.36
037.00.36F
046.420.36046.426.36046.486.36
032.42.36032.48.36
049.420.36049.426.36049.486.36
032.00.36F
9320
073.420.36073.426.36073.486.36
070.420.36070.426.36070.486.36
031.42.36031.48.36
030.42.36030.48.36
030.48.36MP
INNOVATIVE & SUSTAINABLE ARCHITECTURAL SYSTEMS IN METAL & GLASS
FLOOR BRACKETS / COVERS
SADDLES
WALL BRACKETS
010.420.36010.426.36010.486.36
050.420.36050.426.36050.486.36
011.420.36011.486.36
051.420.36051.426.36051.486.36
052.420.36052.426.36052.486.36
053.420.36053.426.36053.486.36
054.420.36054.426.36054.486.36
055.420.36055.426.36055.486.36
056.420.36056.426.36056.486.36
060.420.36060.426.36060.486.36
061.420.36061.426.36061.486.36
012.420.36012.486.36
020.000.36 021.42.36021.48.36
022.42.36022.48.36
025.42.36025.48.36
026.420.36026.486.36
029.42.36Fixed
029.48.36Fixed
029.42.36.270 Deg
029.48.36.270Deg
KLOECKNER ELEGANCE PR - POST & RAIL FITTINGS PRODUCT KEY
Codee.g.
Itemxxx010
Sizexxx420
Gradexx36
FinishxxMP
420 = 42.4 x 2mm
426 = 42.4 x 2.6mm
486 = 48.3 x 2.6mm
600 = 60.3 x 1.5mm
MP0= Mirror Polish
KLOECKNER ELEGANCE SG E-LINE SYSTEMS
0100.BFN0101.SFN
080.42.36080.48.36
080.48.36MP080.60.36
080.6040.36080.8040.36
5100.BF5101.SF
0200.150201.19
0205.21.50203.25
0204.25.5
081.42.36081.48.36
081.48.36MP
52125215521752195221
0300.150301.19
082.42.36082.48.36
082.48.36MP082.60.36
082.6040.36
083.42.36083.48.36
083.48.36MP083.60.36
083.6040.36
084.42.36084.48.36
5303
End capBase Fixed
End cap Size Fixed
5304
Adjustment Spanner
5400
Dowels
5401
5300 5301 5302
SG SYSTEM
SLOTTED TUBE FITTINGS
E-LINE ACCESSORIES
E-LINE
WWW.KLOECKNERMETALS.CO.UK
00.01.10
42.4 x 2mm42.4 x 2.5mm48.3 x 2mm
48.3 x 2.5mm
42.4 x 1.5(24x24mm slot)
48.3 x 1.5(27x30mm slot)
60.3 x 1.5(35x34mm slot)
60 x 40 x 1.5(24 x 24mm slot)
80 x 40 x 1.5(24 x 24mm slot)
091.42.12-G:12091.42.15-G:15091.42.17-G:17091.42.19-G:19091.42.21-G:21
092.48.10-G:10092.48.12-G:12
092.48.15-G:15-17.5092.48.21-G19-21.5
093.60.15-G:15-17.5093.60.19-G:19-21.5093.60.25-G:21-25.5
094.8040.17-G:17094.8040.19-G:19-21.5
023.42.36023.49.36
024.42.36024.48.36
063.486.36
064.42.36064.48.36
071.42.36071.48.36
071.00.36F071.00.36F 10MM 071.00.36F 20MM071.00.36F 40MM
078.40.36
OFFSET GLASS FITTINGS
STAINLESS STEEL TUBES
GLAZING GASKETS
WWW.KLOECKNERMETALSUK.COM
00.01.10
42.4 x 2mm42.4 x 2.5mm48.3 x 2mm
48.3 x 2.5mm
42.4 x 1.5(24x24mm slot)
48.3 x 1.5(27x30mm slot)
60.3 x 1.5(35x34mm slot)
60 x 40 x 1.5(24 x 24mm slot)
80 x 40 x 1.5(24 x 24mm slot)
091.42.12-G:12091.42.15-G:15091.42.17-G:17091.42.19-G:19091.42.21-G:21
092.48.10-G:10092.48.12-G:12
092.48.15-G:15-17.5092.48.21-G19-21.5
093.60.15-G:15-17.5093.60.19-G:19-21.5093.60.25-G:21-25.5
094.8040.17-G:17094.8040.19-G:19-21.5
023.42.36023.49.36
024.42.36024.48.36
063.486.36
064.42.36064.48.36
071.42.36071.48.36
071.00.36F071.00.36F 10MM 071.00.36F 20MM071.00.36F 40MM
078.40.36
OFFSET GLASS FITTINGS
STAINLESS STEEL TUBES
GLAZING GASKETS
WWW.KLOECKNERMETALSUK.COM
Clearvue Tilt Lock
• All adjustments can be achieved from one side• Allows for glass to be tilted 30 mm back or forward• Aluminum construction available in multi strength glass• Fully engineer tested using 6063T5 anodizing grade• Available in models to suit glass from 12mm to 22.28 mm• Suitable for indoor and outdoor installations• Designed to suit top or side fixed applications• Tilt and Lock strength grades• Tested for use with SGP
Product Features
Clearvue Tilt Lock can be adjusted by hand by one person from one side , simply level by hand and tighten the grub screws once in position for a perfect finish everytime in half the time.
Tilt & Lock
Valley Farm Road, Stourton, Leeds, West Yorkshire, LS10 1SDt: 0113 254 0711 | e: [email protected]
4411
39
Kloeckner Metals UK
6 Park Square, Newton Chambers Road, Thorncliffe Park, Sheffield, S35 2PH t: +44(0)330 333 4247 | e: [email protected]
Kloeckner Metals UK | Architectural
Top Related