Ives Price Book Revised 8_14

8/12/2019 Ives Price Book Revised 8_14

1/137

Marketing Bulletin

Please make the following corrections in your price book:

Page 14, Allegion Connect (CON) added to chart Page 17, Allegion Connect (CON) Added Page 19, Allegion Connect (CON) Added

Brand/product Ives

Date August 1, 2014

Subject Price Book Update


2/137

Effective March 3, 2014 Rev. 8/14

Price book 1


3/137


4/137

Ives Price Book 1Effective March 3, 2014 Rev. 3/14

Bold pricing indicates item is in stock and available forFast TrackContact Ives Customer Service for pricing on additional sizes and finishes

Table Of Contents

Terms and Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii-v

How to use this book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi

Index by Product Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii

Keys to Finishes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii-ix

Hinges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-15

Continuous Hinge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16-19

Pivots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20-21

Architectural Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23-75

Hobby Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inside Back Cover

BAA/ARRAFor a list of available BAA/ARRA compliant products please contact yourlocal SSC or Customer Care at 877-671-7011


5/137

Ives Price Book 1Effective March 3, 2014 Rev. 3/14ii

Terms and Conditions

1. GENERAL/ACCEPTANCE. (a) This Agreement contains the only terms and conditions bywhich Company will quote and sell Deliverables to Customer; (b) The terms purchase orderor order for the purposes of this Agreement include the term request for quotation, asappropriate; (c) This Agreement supersedes all pre-printed or boilerplate terms and conditionsset forth in any purchase order issued by Customer; (d) No reference herein to Customerspurchase order will in any way incorporate different or additional terms and conditions, allof which Company hereby expressly objects to; (e) ANY ACCEPTANCE BY COMPANY OFCUSTOMERS PURCHASE ORDER IS EXPRESSLY CONDITIONED ON THE CUSTOMERSASSENT TO AND ACCEPTANCE OF THE TERMS AND CONDITIONS CONTAINED INTHIS AGREEMENT;(f) Company reserves the right to decline any order, in whole or in part,for any reason.

2. ORDERS. a. Order Processing. When Customer wishes to place an order for Deliverables, it willdeliver to Company a purchase order. All such purchase orders must (i) be in a written formatacceptable to Company, (ii) be legible, (iii) include a purchase order number, (iv) includeCustomers account number, invoice address, ship to address, shipping method, shippersletter of instruction for international shipments, part number, pricing, and designated contactinformation, (v) include, if applicable, any special configuration ID numbers, necessaryprogramming information, special factory instructions, and requested specifications regardinga particular finish, handing, design, backset, or strike, and (vi) reference any applicable pricingdiscounts under an ongoing buying program or based on a written quote from Company, alongwith the applicable buying program number or quotation number.

b. Minimum Orders. In the event the order value does not meet any required minimumnet Deliverable value, Company may, at its sole discretion, (i) increase the quantity of itemsin the order to meet the minimum net Deliverable value requirement; (ii) apply a minimumorder charge; (iii) reject the order, or (iv) waive the requirement, provided that the waiver ofa requirement for one order shall not constitute a waiver of the requirement for any futureorders. c. Acceptance of Purchase Orders. Company will endeavor to (i) acknowledge receiptof each purchase order issued in accordance with this Agreement, and (ii) notify Customerwhether Company accepts or rejects the purchase order. If Company fails to accept or rejecta purchase order within a reasonable time period, such failure to respond will be deemed arejection of the entire order. d. Changes to Order/ Cancellation of Orders. Additional terms and conditions regarding

order changes and cancellations are available on the Allegion customer website,WHICHTERMS ARE EXPRESSLY INCORPORATED HEREIN BY REFERENCE. Unless otherwiseprovided herein, Customer acknowledges that (i) requesting a Change Order may causea delay in the scheduled shipment date, a longer lead time or result in a new scheduledshipment date; (ii) Orders may not be changed after 48 hours of Companys orderacknowledgment; (iii) After 48 hours of Companys order acknowledgment, all changesto an accepted purchase order will be subject to a Change Order charge of 25% of the netDeliverable value, plus the cost of labor and fabrication or raw material that Company incurredprior to the receipt of the Change Order from Customer, or that may be required due to theChange Order; (iv) the requested change may result in additional charges for labor, fabrication,and raw material, and (v) if Customer cancels an order or portion of an order that includesDeliverables that have been manufactured and prepped for shipping, a 35% restocking feewill apply. Notwithstanding the foregoing, Customer cannot change or cancel credentialorders, reader orders, biometrics orders or any non-cataloged, special, Custom or nonstandarditems once they have been placed. All cancelled orders for a Non Recurring Expense (NRE),credential orders, reader orders, biometrics orders, and/or Custom orders will be subject to acancellation charge of 100% of the acknowledged price.

e. Add-ons. Add-on orders will not be accepted. Additions to orders will be entered asseparate stand-alone orders and must qualify for all terms of sale, including discounts, on anindividual basis.

f. Fast-Track Orders. No changes or cancellations will be accepted on the 24-Hour FastTrack Program. For 3-day Fast Track orders, changes and cancellations may only be requested

by Customer within 24 hours of Companys order acknowledgment if the order has notshipped. For 5-Day Fast Track orders, changes and cancellations may only be requested byCustomer if the order has not shipped and if the request is made to Company within 48 hoursof Companys order acknowledgment. Return Material Authorization (RMA) for Deliverablesmust be processed through Fast Track Customer Service.

g. Steelcraft Orders. For all Steelcraft orders, changes or cancellations are allowed withoutpenalty only if made within 48 hours of Companys order acknowledgment, and provided thatthe order has not shipped. Some exceptions do apply please consult the factory. Changesare not allowed on Rapid Program orders after the order has been entered and acknowledged.After 48 hours of Companys order acknowledgment, all changes or cancellations are subjectto a charge of 25% of the order. Unless otherwise specified by Company in writing, anychanges to orders acknowledged by Company that affect the delivery date will be deemeda new order and will require acknowledgement by Company as provided in this Section.Additional products, features, terms and conditions regarding the Rapid Program areavailable on the Allegion,WHICH TERMS ARE EXPRESSLY INCORPORATED HEREIN BYREFERENCE.

3. PRICES, INVOICES AND PAYMENT. a. Prices. The prices in Companys Price Book are subject to change at any time, withoutnotice to Customer. Company may charge Customer additional amounts if Customer requestsspecial packing, marking, shipment, product modification, or engineering services. Oral pricesspecified by Company are null and void. Quote numbers must be referenced on Customerspurchase order in order for the Companys quoted pricing to apply. Orders that do notreference a quote number will receive buy program pricing or book net pricing. Quoted pricesare for those specific products quoted for a specified job, and are subject to the Price Book ineffect at the time the quote was issued by Company.

b. Taxes. Prices do not include any present or future federal, state or local property, license,privilege, sales, use, excise, gross receipts or other like taxes or assessments which may resultfrom transactions or any services performed in connection therewith. Any taxes, charges,or duties imposed by any governmental authority on the sale of Deliverables will be paid byCustomer, in addition to the selling price specified by Company.

c. Payment Terms. Company will deliver to Customer an invoice with each shipment ofDeliverables hereunder. Customer will pay all invoiced amounts within 35 days of the invoicedate, provided that Customer may take a 2% discount if Customer pays in cash and Companyreceives said payment within 20 days of the invoice date. For the avoidance of doubt, cashdiscounts do not apply to credit card payments. Customer will make all payments in UnitedStates dollars. Past due invoices will be subject to a late payment service charge of 1.5%per month on any overdue unpaid balance, equivalent to 18% per annum, or the maximumrate permitted by law, whichever is less. Customer shall reimburse Company for all costs of

collection, including, without limitation, reasonable attorneys fees, for any overdue amountowed by Customer to Company, and such collection costs shall also be subject to interestcharges.

4. QUOTATIONS. a. Project Quotations. Project or new construction quotes are restricted to the specificproject quoted for the quantities, finishes, and series of Deliverables referenced on the quote.Company reserves the right to require proof of sale of Company products for any quotedproject.

b. Stock Quotations. Deliverables fulfilling stock quotations may only be used for thefollowing: i) Stocking of the Customers shelves for small, quick-turn, discretionary projects, orii) Sale to a general contractor or installer for new construction. Stock quotations may not beused for any project containing any Company no-substitution, specified products. Deliverablespurchased under Stock Quotations cannot be redistributed to other Customer branch locationsor re-sold to other resellers or used for aftermarket sales, end-user annual contracts or soldover the counter to any walk in trade.

c. General. All quotes are subject to this Agreement, unless otherwise specified byCompany, and are subject to change at any time prior to Companys acceptance of a purchaseorder referencing the applicable quote number. Company, its representatives and employeesreserve the right, in their sole discretion and for any reason, to refuse a Customers requestto quote a price other than the standard list price, regardless of whether Company or itsrepresentatives or employees have previously quoted discounted prices to the Customer onsome or all of its orders. Customers failure to comply with this Section 4 will be considereda material breach of this Agreement, and will entitle Company to immediately terminate anypurchase orders and/or Customers ability to distribute Companys products.

5. SECURITY INTEREST. Customer grants Company, and Company retains, a purchasemoney security interest and lien on any and all of Customers rights, title and interest ineach Deliverable sold by Company to Customer, wherever located, until the invoice for theapplicable Deliverable(s) is paid in full, including any late charges and costs of collection.Customer authorizes Company to, and will assist Company in, taking all necessary steps toperfect and maintain Companys interest in such Deliverables.

6. CREDIT TERMS. Unless Customer pre-pays all of its purchase orders in advance, itspurchase orders will be subject to the credit limit and other terms of credit (Credit Terms)

set forth in Companys credit application, which Credit Terms Customer acknowledges aresubject to change by Company at any time. Company reserves the right to request payment inadvance of shipment or any order or to request adequate assurances for Customers paymentof an order and may withhold or stop shipment, without any liability to Company, untilCustomer submits payment or adequate assurance of payment.

7. RE SALE OF DELIVERABLE S. Customer agrees and warrants that it will offer Companyproducts in support of Company-written specifications and will maintain sufficient inventoryto adequately support End Users, installers, and/or general contractors needs. Customerwill adhere to any MSRP or resale pricing programs of Company. Failure to comply with thisprovision will be considered a material breach of this Agreement, and will entitle Company toimmediately terminate any purchase order and/or Customers ability to distribute Companysproducts. Customer shall, at its own expense, gain and maintain sufficient knowledge of theindustry and products competitive with Deliverables so as to be able to (a) explain in detail toEnd Users, installers, and/or general contractors the differences between the Deliverables andcompeting products, (b) ensure that an adequate number of trained, capable and qualifiedtechnical personnel with sufficient knowledge of the Deliverables and who have obtained allnecessary licenses and permits are available to assist End Users, installers, and/or generalcontractors, and (c) respond to such End Users, installers, and/or general contractors withrespect to the general operation and use of the Deliverables including, but not limited to, (1)acting as a liaison between the End Users, installers and/or general contractors and Companyin matters requiring Company participation, (2) providing general product information and

configuration support on standard protocols and features, (3) collecting relevant technicalproblem identification information, and (4) posting and distributing any warranty informationconcerning the Products in accordance with Companys instructions. Customer is responsiblefor all service and support resulting from the re-sale of any Deliverable to End-Users, installersand/or general contractors, examples of which may include, but are not limited to, supportactivities such as installation, initialization, software set-up, training, trouble-shooting,technical support and field service. In the event Customer is unwilling or unable to performsaid support activities, Company reserves the right to recover from Customer any and allexpenses incurred by Company to resolve the afore-mentioned End-User, installer and/orgeneral contractor issues. Technical product training is recommended for Customer in order tofully service and support Deliverables purchased from Company that are resold to End-Users,installers and/or general contractors.

8. DEFAULT. If Customer is in default of payment or otherwise with respect to any purchaseorder or other contract with Company, Company shall have the right, in addition to all otherlegal remedies and without prejudice to any of its right hereunder, to defer further shipmentsunder that or any other purchase order until such default is corrected and to declare alloutstanding bills of Customer to be immediately due and payable.

9. INSPECTION AND DELIVERY.a. Inspection. Customer will inspect all Deliverables immediately after receiving them.

Customer will be deemed to have accepted the Deliverables unless Customer notifiesCompany in writing of any nonconformance within 10 days of delivery and provides Companywritten evidence reasonably documenting that nonconformance. Inspection of Deliverables atCompanys facility is not permitted. b. Delivery. Delivery schedules for Deliverables are based upon current productioncapacities, material or component availability, and inventory, and may be changed byCompany as conditions require. Delivery schedules for services are based upon Companysprompt receipt of, and prompt access to, Customers equipment and all information necessaryto complete the services. In no event will any delivery date be construed as falling within themeaning of time is of the essence. Partial delivery shall be accepted by Customer and paidfor at the price and on the terms stated herein. Any partial delivery shall constitute a separatesale, and payment shall be separately made when due. If any part of a delivery hereunder isnot delivered by Company in accordance with Customers purchase order, this Agreement shallnot be affected thereby.

10. TITLE & RISK OF LOSS. Unless otherwise specified by Company, (i) where the Customeris located in the United States, all Deliverables will be sold Uniform Commercial Code, FOBOrigin, Companys factory; and (ii) where the Customer is located outside of the United

Allegion General Terms and Conditions of Sale and Service


6/137


States, all Products will be sold Ex-works, Companys factory (Incoterms 2010). In eitherinstance, title and risk of loss will pass to Customer upon delivery to the carrier at Companysfactory, provided, however, as set forth herein, Company shall retain a security interest in theDeliverables until full payment has been made therefore, and Customer agrees, upon request,to do all things and acts necessary to protect Companys interest by adequately insuringthe Deliverables against loss or damage from any cause and to have Company named asan additional insured. Customer will promptly provide Company with a copy of the relevantcertificate of insurance upon Companys request.

11. SHIPPING & SHIPPING PROGRAMS. a. Freight Charges. Company will ship all Deliverables in accordance with Companysfreight shipment guidelines, which are set forth on the Allegion customer website (FreightShipping Guidelines), WHICH TERMS ARE EXPRESSLY INCORPORATED HEREIN. b. Rush Charges. Expedited order options are available as set forth in Companys freightshipping guidelines. c. Packing and Marking. Company will pack, mark, and ship Deliverables according to itsstandard procedures for shipment, unless the parties agree, in writing, that Company willcomply with any special instructions provided by Customer. Special instructions may result inan increased price.

d. International Shipments. For all international orders, a Shippers letter of instructionmust be submitted in writing with the order. Failure to do so will result in the order beingrejected. Complete adherence to this order requirement will be strictly enforced. Companywill not be held liable for any charges resulting from delays due to lack of complete requiredinformation being supplied.e. Once received by the Company, a purchase order cannot be combined with any otherorder to qualify for freight allowances. In addition, Customer may not combine any Companybrands or product categories on a single order to meet the applicable net freight allowance,except in the case of: i) FastTrack 24 Hour/5 Day Program, which is available for Schlage,Von Duprin, LCN and Glynn-Johnson products; ii) FastTrack 24 Hour/3 Day Program, whichis available for Falcon Locks, Exits and Closers and Ives products. When an order includesproducts from the brands listed in both (i) and (ii) above, the order will automatically defaultto the FastTrack 24 Hour/5 Day Program lead times and freight allowance.

12. CLAIMS. All claims must be submitted in writing to Company as follows: (i) All claimsfor prices must be submitted within thirty (30) days from the date of invoice; (ii) All claims

regarding Deliverable quantity or incorrect orders must be submitted within ten (10) daysfrom the date of delivery; (iii) All claims for damage to Deliverables (while in the care,custody, and control of Company) must be submitted within thirty (30) days from the dateof invoice; (iv) All claims for loss or damage to Deliverables while in the care, custody, and/or control of a carrier will be the responsibility of Customer, unless otherwise agreed by theparties.

13. PRODUCT CHANGES. Companys product policy is one of ongoing update and revision,and accordingly, Company reserves the right to change, without notice, the design of, or theprocess of manufacturing, the Deliverables covered by this Agreement.

14. PRODUCT USAGE LIMITATION. Customer agrees: (i) not to sell or use a Deliverable inany manner contrary to the manner in which the Deliverable is intended to be used; and/or(ii) not to modify the design of any Deliverable for use with another product without the priorwritten consent of Company.

15. PRODUCT RETURNS. Unless otherwise agreed by the parties in writing, Deliverablesthat are correctly furnished by Company per the purchase order may not be returnedunless Customer receives written authorization from Company. If returns are authorizedby Company, a return merchandise authorization (RMA) number must be provided byCompany. Deliverables identified under such RMA must be returned to Company within 90days of issuance of the RMA. Such RMA number and any accompanying RMA documents, the

original invoice number, and a written explanation for the return must be included with thereturned Deliverables in order for Company to inspect and approve a credit for the return. Forwarranty returns, a credit in the amount of the original purchase price will only be issued if,after Companys receipt and inspection of the returned Deliverables, Company confirms, inits sole discretion, the defect is valid and approves the return. For non-warranty returns, (a)in the event Company approves such a return, a credit will be made to Customers accountin the amount of the original purchase price less freight and a handling charge of 35% of thenet material on the original invoice; and (b) Only Deliverables that are new, current, standard,non-obsolete, non-specially manufactured, unused, in their original condition as at the timeof sale by Company to Customer, in their original packaging and in Customers inventory lessthan 180 days from the date of shipment by the Company may be considered by Companyfor return. Such credit will only be issued if, after Companys receipt and inspection ofDeliverables, Company approves the return. The amount of final credit will be determinedupon receipt at the factory and following Companys inspection and analysis of the conditionof the returned material. Company retains the right to deny credit to anyone for any reason.

16. CONFIDENTIAL INFORMATION. a. Non-Use And Non-Disclosure. Customer shall not use the Confidential Information ofthe Company except for the purpose of performing its obligations under this Agreement orexercising the rights granted herein (the Purpose). Customer shall protect ConfidentialInformation of the Company from disclosure and unauthorized use in the same manner thatit protects its own Confidential Information, but in no event shall such standard of care beless than reasonable care. Customer may disclose Confidential Information of the Companyonly to its employees who require such information for the Purpose and who are subject toconfidentiality obligations at least as protective as those set forth herein.

b. Proprietary Information and Advice. (a) All designs, data, and specifications provided byCompany are proprietary and may not be disclosed or reused by Customer without the priorwritten consent of Company; (b) Company assumes no obligation or liability for any advicegiven by Company, the results obtained, or damages incurred as a result of such advice, andall such advice is given and accepted at Customers risk. c. Return. Upon the termination or expiration of a purchase order or this Agreementor upon the request of the Company, the Customer agrees to end all further use of, toimmediately return to the Company the original version of, and to delete or destroy all copiesof, any and all Confidential Information of the Company.

17. TRADEMARKS. Except as agreed to by Company in writing, Customer agrees not to (a)use Companys name in any form of publicity; or (b) use, create, register or market, directly orindirectly, in whole or in part, Companys names, logos, brands, or any other trademarks, ornames that are now or may hereafter be owned by Company, as part of Customers corporate

or business name, as part of an internet domain name, uniform resource locator (URL), orin any way connected with Customers business, trade address or other designations. Upontermination of this Agreement or upon the request of company for any reason, any use ofCompanys trademarks or names will be immediately discontinued.

18. LIMITED WARRANTY.COMPANY MAKES NO OTHER WARRANTIES EXCEPT THOSE STATED INCOMPANYS LIMITED WARRANTY IN EFFECT ON THE DATE COMPANY ACCEPTSEACH APPLICABLE PURCHASE ORDER (LIMITED WARRANTY). THE LIMITEDWARRANTY MAY BE FOUND IN THE APPLICABLE PRICE BOOK AND ON THEALLEGION CUSTOMER WEBSITE, WHICH TERMS ARE EXPRESSLY INCORPORATEDHEREIN BY REFERENCE. COMPANY WILL MAIL CUSTOMER A HARD COPY OFTHIS WARRANTY UPON CUSTOMERS WRITTEN REQUEST. IN THE EVENT THATCERTAIN DELIVERABLE WARRANTIES ARE NOT FURNISHED BY THE COMPANY TOCUSTOMER, COMPANY WARRANTS ONLY TO CUSTOMER THAT THE DELIVERABLESWILL BE FREE FROM DEFECTS IN MATERIAL AND WORKMANSHIP FOR APERIOD OF 12 MONTHS FROM THE DATE OF SHIPMENT OF THE DELIVERABLES.COMPANYS SOLE OBLIGATION UNDER THIS WARRANTY IS LIMITED TO REPAIRINGOR REPLACING, AT COMPANYS OPTION, THE DEFECTIVE DELIVERABLE,PROVIDED WRITTEN NOTICE OF THE DEFECT OR NONCONFORMANCE ISPROVIDED BY CUSTOMER WITHIN 30 DAYS OF DISCOVERY OF THE DEFECT ORNONCONFORMANCE. COMPANY DISCLAIMS ALL OTHER WARRANTIES, EXPRESSOR IMPLIED, WITH RESPECT TO THE DELIVERABLES, INCLUDING BUT NOT LIMITEDTO, ANY IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY, ORFITNESS FOR A PARTICULAR PURPOSE. a. Exclusions. The provisions of this Limited Warranty do not apply to Deliverables that:(A) are not the proper size for the application; (B) are not installed in accordance withCompanys published installation instructions; (C) are installed with improper or incorrectparts and/or are used for purposes for which they are not designed or intended; (D) havebeen repaired or altered without the Companys prior written consent; (E) have beensubjected to misuse, abuse, negligence or accident; (F) have been improperly stored, installedmaintained or operated; (G) have been used in violation of written instructions provided byCompany to Customer; (H) have been subjected to improper temperature, humidity, or otheenvironmental conditions, or (I) have been affected by normal wear and tear. In addition,the provisions of this Limited Warranty do not apply to any defects or issues with the design

or performance of equipment or products not manufactured by Company, nor does it applyto any code compliance or permit requirements for the assembly, installation, erection orconstruction of any goods. Company is not responsible for loss or damage resulting fromuse of Deliverables in conjunction with parts or systems not manufactured by Company.Accessories or products furnished by the Company, but manufactured by others, shall carrywhatever warranty the manufacturers have conveyed to the Company and which can bepassed to Customer. b. Services. Company warrants that its services will be free from defects in materialand workmanship for a period of 12 months from the date of completion of the particularitems of service. Companys sole obligation under this service warranty is limited to repairor reperformance, at its option of the service, provided however, if repair or reperformanceis either impractical or impossible, the Company will refund to Customer that portion of theprice paid to Company for any defective service, provided written notice of the defect ornonconformance is provided by Customer within 30 days of discovery of the nonconformance c. Notification. Customer agrees to immediately notify Company in writing if any claim ismade against Customer for any damages caused by any modules, parts, products, service orother Deliverables which may be the direct result of any defect in the manufacture of suchaforementioned products. Customer agrees to cooperate with Company and its counsel inthe defense of such claim and Customer agrees not to settle such claim without Companyswritten consent. If Customer fails to notify Company of such claim or fails to cooperate insuch defense as aforesaid, then Company shall be discharged from any obligations under thisSection and shall have no further liability to Customer.

d. Exceptions. The following costs and expenses are not covered by the provisions of theslimited warranties: (i) labor costs for the removal and reinstallation of Deliverables or othermanufacturers products; (ii) shipping and freight expenses required to return Deliverablesto Company; (iii) normal maintenance; and (iv) economic losses. In addition, the provisionsof this warranty are not applicable to anything other than defects in Companys material(products only) or workmanship.

19. LIMITATION OF REMEDIES.CUSTOMERS EXCLUSIVE AND SOLE REMEDY ON ACCOUNT OF, OR IN RESPECTOF, THE FURNISHING OF NON-CONFORMING DELIVERABLES, SHALL BE TO (A)SECURE REPAIR OR REPLACEMENT OF THE PRODUCTS; OR (B) SECURE REPAIROR RE-PERFORMANCE OF THE SERVICES OR TO OBTAIN A REFUND OF THEPRICE PAID FOR THE DEFECTIVE SERVICE, ALL AT COMPANYS OPTION. IN NOEVENT WILL THE COMPANYS MAXIMUM LIABILITY EXCEED THE SELLING PRICEFOR THE DELIVERABLE. THE WARRANTY, OBLIGATIONS AND LIABILITIES OFCOMPANY (INCLUDING ITS SUPPLIERS) AND THE RIGHTS AND REMEDIES OFCUSTOMER ARE EXCLUSIVE AND ARE IN LIEU OF AND CUSTOMER HEREBY WAIVESAND RELEASES ALL OTHER WARRANTIES, OBLIGATIONS, REPRESENTATIONSOR LIABILITIES EXPRESS OR IMPLIED ARISING BY LAW, IN CONTRACT, TORT(INCLUDING NEGLIGENCE OR STRICT LIABILITY) OR OTHERWISE, INCLUDING BUTNOT LIMITED TO (I) ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESSFOR A PARTICULAR PURPOSE OR ANY WARRANTY IMPLIED THROUGH COURSEOF PERFORMANCE, COURSE OF DEALING, OR USAGE OF TRADE OR (II) CLAIMSARISING OUT OF THE NEGLIGENCE OF COMPANY OR COMPANYS SUPPLIERS OR(III) ANY OTHER CLAIM ARISING OUT OF, CONNECTED WITH, OR RESULTING FROMTHE PERFORMANCE OF COMPANY OR FROM THE DESIGN, MANUFACTURE, SALE,REPAIR, LEASE OR USE OF THE DELIVERABLE, OR ANY COMPONENT THEREOF,DELIVERED OR RENDERED HEREUNDER OR OTHERWISE.

20. INDEMNIFICATION AND LIMITATION OF LIABILITY. a. Customer shall indemnify,defend and hold Company, and its officers, directors, employees, customers, Affiliates,suppliers, users and agents, (collectively the Indemnitees) harmless from and against anyand all damages, claims, losses, expenses, costs, obligations, liabilities, including withoutlimiting the generality of the foregoing, liabilities for court costs and attorneys fees, suffereddirectly or indirectly by an Indemnitee by reason of, or arising out of any injury, death or loss toany person, or injury to any property (collectively, Damages), receivedor sustained by any person(s) or property, arising out of, occasioned by, attributable or relateto i) any breach of any representation or warranty made by Customer, its officers,



7/137

Ives Price Book 1Effective March 3, 2014 Rev. 3/14iv

directors, employees, affiliates, users, agents, representatives or customers to Company orany third party, (ii) any failure by Customer to perform or fulfill any of its covenants, acts and/or omissions to Company or to any third party, or (iii) any litigation, proceeding or claim byany third party relating in any way to the obligations of Customer and/or the Deliverablessold by Company to Customer hereunder. Customer shall not consummate any settlementof any indemnified claim without the Indemnitees prior written consent. Customersobligation to indemnify Indemnitees will continue in full force and effect notwithstandingthe termination or expiration of any order under this Agreement. In any claim against anIndemnitee by an employee of Customer or any subcontractor or anyone directly or indirectlyemployed by any of them or anyone for whose acts they may be liable, the indemnificationobligations set forth in this Section shall not be limited in any way by or for Customer or anysubcontractor under any applicable workers compensation act, disability or other employeebenefit act. This provision shall survive termination of any order or Agreement.IN NOEVENT WILL COMPANY, ITS OFFICERS, DIRECTORS, EMPLOYEES, CUSTOMERS,AFFILIATES, USERS AND AGENTS, (NOR COMPANYS SUPPLIERS) BE LIABLE FORANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGESOF ANY KIND OR NATURE UNDER ANY CIRCUMSTANCES INCLUDING, BUT NOTLIMITED TO, LOSS OF USE OF THE PRODUCTS, SERVICE INTERRUPTION, LOSSOF PROFITS, LOSS OF REVENUE, LOSS OF INTEREST, LOST GOODWILL, LOSS OFDATA, WORK STOPPAGE, IMPAIRMENT OF OTHER GOODS, LOSS BY REASON OFSHUTDOWN OR NON-OPERATION, INCREASED EXPENSES OF OPERATION, ORCLAIMS OF CUSTOMERS CUSTOMERS, OR ANY OTHER LOSSES OR DAMAGESARISING OUT OF ANY LACK OR LOSS OF USE OF THE DELIVERABLES WHETHERBASED ON CONTRACT, WARRANTY, TORT (INCLUDING, BUT NOT LIMITED TO,STRICT LIABILITY OR NEGLIGENCE), PATENT INFRINGEMENT, OR OTHERWISE,EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.b) INTELLECTUAL PROPERTY INDEMNITY.Company makes no representation orwarranty to the Customer that the Deliverables shall not infringe any intellectual propertyrights including, without limitations, claims arising from patent, copyright, trademark, tradesecret, or other intellectual property infringement. Customer agrees to hold Companyharmless from and defend the Company against any such claim of intellectual propertyinfringement, including any Damages resulting from that claim, the cost of complyingwith any preliminary or permanent injunction, and all other costs of defense (including theattorneys fees and costs), in connection with the foregoing.c) To the extent that applicable law does not permit any limitations set out in this

Agreement, such limitation shall not be applied or invoked. Nothing in this Agreement willbe interpreted to disclaim liability of Company or the Indemnitees for gross negligence orwillful misconduct. The limitations of remedy and liability herein shall not be interpreted toaffect Companys obligations, if any, for claims for (i) property damage, (ii) personal injury,or (iii) wrongful death asserted by persons who are not parties to or beneficiaries of thisAgreement. Further, the limitations of remedy and liability herein shall not be interpretedto limit Companys or Customers right, if permitted by applicable law, to assert a claim forcontribution among joint tortfeasors in connection with a claim by a person who is not a partyto this Agreement.

21. CERTIFICATIONS. Certification of Deliverables for compliance with UL and ANSIstandards are tested and performed by third-party independent laboratories. Any fieldmodification or alteration of certified Deliverables will void certification and Company is notliable to Customer to certify any modified or altered Deliverable.

22. TERM FOR CLAIMS. NO ACTION ARISING OUT OF ANY CLAIMED BREACH OF THISAGREEMENT BY COMPANY MAY BE BROUGHT BY CUSTOMER MORE THAN ONE (1)

YEAR AFTER THE CAUSE OF ACTION HAS ARISEN.

23. CONSUMER PRODUCTSWITH RESPECT TO CONSUMER PRODUCTS AS DEFINED UNDER THE MAGNUSON-MOSS WARRANTY ACT (MMWA), THE FOLLOWING STATEMENTS ARE MADE. (A)

SOME STATES OR LOCAL LAWS DO NOT ALLOW LIMITATIONS ON HOW LONG ANIMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU;(B) IF ANY IMPLIED WARRANTY IS PROVIDED UNDER THE MMWA, IT IS LIMITEDTO THE DURATION OF THE WARRANTY PROVIDED IN SECTION 18 ABOVE. (C)SOME STATES OR LOCAL LAWS DO NOT ALLOW THE EXCLUSION OR LIMITATIONOF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONOR EXCLUSION MAY NOT APPLY TO YOU; AND (D) THIS WARRANTY GIVES YOUSPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARYFROM STATE TO STATE OR LOCATION TO LOCATION.

24. FORCE MAJEURE/EXCUSABLE DELAY. Any delay or failure of Company to perform itsobligations hereunder will be excused to the extent that it is caused by an event or occurrencebeyond Companys control such as, by way of example and not by way of limitation, actsof God, acts by any governmental authority (whether valid or invalid), governmental lawsand regulations not presently in effect, fires, floods, windstorms, explosions, riots, naturaldisasters, wars, sabotage, accidents, labor problems (including, without limitation, lockouts,strikes, and slowdowns) at Companys facility, its source plant or their suppliers, inabilityto obtain power, material, labor equipment, or transportation, or court injunction or order.The delivery date will be extended for a time equal to that of the delay and the schedule forCompanys performance will be deemed adjusted to that effect.

25. ENTIRE AGREEMENT AND AMENDMENT. This Agreement, together with theattachments, exhibits, webpages, or supplements specifically referenced and incorporatedherein, constitute the entire agreement between Company and Customer with respect tothe matters contained herein and supersede all previous communications, representations,or agreements, either oral or written between Company and Customer. No agreement orunderstanding varying or expanding this Agreement will be binding upon either party unless itis in writing and signed by a duly authorized representative of each party hereto.

26. CONFLICTS. In the event of any conflict or inconsistency between the terms of anyagreement, or any part of an agreement or the various documents (including, but notlimited to, electronic documents) between Company and Customer, unless the partiesagree otherwise in writing, the various components of the agreements shall be given thefollowing precedence (in descending order of precedence): a) any master agreement or longterm agreement between Company and Customer; b) any specific terms, conditions and/or warranties of the individual products or Deliverables; c) the terms and conditions of thisAgreement, and d) any purchase order.

27. UNSATISFACTORY CREDIT/TERMINATION FOR INSOLVENCY OR DEFAULT.Customer shall furnish Company with statements evidencing Customers financial condition

as Company may, from time to time, reasonably request, and shall notify Companyimmediately of any and all events that may have a material adverse effect on Customersbusiness or financial condition. If Company determines, in its sole discretion, that Customersfinancial condition or creditworthiness is inadequate or unsatisfactory, then in addition toCompanys other rights, Company may without liability or penalty, take any of the followingactions: (i) modify the payment terms for any outstanding and/or future purchases; (ii)cancel any previously accepted orders; (iii) delay any further shipment of Deliverables toCustomer; or (iv) any combination of the above.

Company may immediately terminate an order from Customer by giving written notice toCustomer in the event of the happening of any of the following or any other comparableevent: (i) insolvency of the Customer; (ii) filing of a petition in bankruptcy by or against theCustomer; (iii) appointment of a receiver or trustee for the Customer; (iv) execution of anassignment for the benefit of creditors by the Customer, all of which will allow Company todemand reclamation of all affected orders; (v) Customer ceases or threatens to cease totrade; (vi) Company determines that Customer does not meet or no longer meets the creditrequirements of Company or Customers credit account is closed; (vii) any Customer violationof law, specifically including, without limitation, those laws set forth in this Agreement.

In the event of termination in accordance with this section, Company will not be obligatedto accept any existing or additional orders from Customer and Company will be releasedfrom its obligation to deliver under orders accepted prior to such termination. The rejectionor termination of any order by Company will not entitle Customer to any termination orseverance compensation, or to any payment in respect to any goodwill established byCustomer, or render Company liable for damages on account of the loss of prospectiveprofits, or on account of any loss, expenditure, investment or obligation incurred or made byCustomer.

No action taken under this Section 27 by Company (nor any failure of Company to act underthis Section 27) will constitute a waiver by Company of any of its rights to enforce Customersobligations, including the obligation of Customer to make payments as required under thisAgreement. Upon termination of any order, all amounts owed by Customer to Company willbecome immediately due and payable, whether or not otherwise then due or payable.

28. CREDIT RISK ON RESALE OF DELIVERABLES. Customer is responsible for all credit

risks with respect to, and for collecting payment for, all Deliverables sold to third parties(including End Users, installers, and/or general contractors) whether or not Customer hasmade full payment to Company for such Deliverables. The inability of Customer to collectpayment for any Deliverable shall not affect Customers obligation to pay Company for anyDeliverable.

29. GOVERNING LAW; VENUE; AND EXPENSES. Any dispute or claim relating to thisAgreement shall be governed by and construed according to the laws of the State of Indiana(excluding its conflict of laws principles); and not by the provisions of the 1980 United NationsConvention on the International Sale of Goods. Any disputes or claims shall be institutedand maintained in the courts of the State of Indiana. Customer consents to the exercise ofjurisdiction over it by such courts and agrees that Indiana is not an inconvenient forum for anyaction arising from or relating to this Agreement. Customer agrees to pay for all expenses(including, but not limited to, collection costs, court costs and attorneys fees) incurred byCompany in enforcing the obligations of Customer under this Agreement.

30. RELATIONSHIP OF THE PARTIES. Nothing in this Agreement or any other documentcreates an employment, partnership, joint venture, or agency relationship between Companyand Customer, including that of franchisee/franchisor. No party will have any power orauthority to enter into any commitment on behalf of or otherwise bind the any other partyon any matter. No employee of Customer will be deemed to be an employee of Company.If any provision of this Agreement is deemed to create a franchise relationship or business

opportunity between the Parties, then Company may terminate any purchase order or thisAgreement or the Parties shall negotiate in good faith to modify this Agreement so as toeffect the original intent of the Parties as closely as possible in a mutually acceptable mannerin order that the transactions contemplated hereby are consummated as a reseller agreementand not a franchise or business opportunity agreement.

31. SETOFF. Customer does not have the right to setoff or to back charge against anyamounts which become payable to Company under this Agreement or otherwise. Companywill not accept responsibility for backcharges for the cost of material or labor by Customer orany third party.

32. ELECTRONIC COMMUNICATIONS AND ELECTRONIC SIGNATURES. Both partiesexpressly agree to electronic transactions and acknowledge that documents they signelectronically will bind them to the same extent as a paper signature. Customer representsand warrants to Company that only employees authorized to bind Customer legally shallelectronically sign any document under this Agreement. Customer shall comply with anymethod of electronic communication/payment processing specified by Company, includingelectronic funds transfer, pay-on-receipt processes/systems, order transmission, releases,electronic signature, and electronic communication systems, including, without limitation, theuse of electronic data interchange (EDI) portals. Notwithstanding the foregoing, e-mails,even those containing a signature block of one of Companys representatives, shall notconstitute a signed writing.

33. COMPLIANCE WITH APPLICABLE LAWS. a. General. Company and Customer will comply with all applicable federal, state andmunicipal laws, regulations, codes, ordinances and orders that pertain to the Deliverables,including but not limited to full compliance with any applicable provisions of The HealthInsurance Portability and Accountability Act. Where the Customer is located outside theUnited States, or where the customer intends to ship the product outside the United States,the Customer shall be responsible for compliance with all U.S. export laws, and for filing allU.S. Electronic Export Information, as applicable.

b. The Customer acknowledges and agrees that: (i) it shall not violate applicable lawsand regulations in performing its duties under this Agreement; (ii) it does not and shall notengage in any conduct that shall violate any applicable anti-bribery or anti-corruption lawsor regulations; (iii) it (and its owners, officers, directors, employees and agents) shall notpay, offer, promise or authorize the payment of, either directly or indirectly, anything of value(including but not limited to cash, gifts and entertainment) to (a) any government officialor employee of any government; (b) any official or employee of any department, agency, orinstrumentality of a government; (c) any employee of any corporation or entity owned orcontrolled by a government; (d) any family member of such officials or employees; (e) any



8/137



political party, party official, or political candidate; or (f) any other persons, owners, officers,directors, employees and agents of any corporation or entity; to improperly or illegally assistin obtaining or retaining business (including but not limited to any contracts, avoidanceof duties or reduction of tariffs, reduction of taxes or to obtain money owed, or to obtainregulatory approval) or for the purpose of causing, soliciting or inducing the sale and purchaseof the Deliverables by any party, and (iv) it has full knowledge of and will comply with theCompanys Code of Conduct for Business Partners as set forth on the Allegion customerwebsite, WHICH IS HEREBY INCORPORATED BY REFERENCE.

c. The Customer shall indemnify and hold the Company harmless from any claim, demand,expense or cost arising from any breach of this Article.d. The Customer shall permit the Company to conduct an audit or review of the Customersfinancial books and records and business operations at such other times that the Companyconsiders it necessary to confirm compliance with this provision. Such audit may beconducted by representatives of the Company or, at the Companys sole discretion, by acertified public accounting firm selected by the Company. The Customer shall cooperate withany inquiries from the Companys Ethics & Compliance Group.e. A violation of this provision constitutes a material breach of this Agreement and theCompany may terminate any purchase order or this Agreement immediately, with noopportunity to cure, in accordance with Section 27 of this Agreement.f. Notwithstanding the foregoing provisions of this Section 33, (i) Company is not responsiblefor obtaining or maintaining any permits for the performance of services or the verificationor compliance with any code requirements relative to the performance of services, (ii) to theextent any sale of Deliverables pursuant to this Agreement may require approval of the U.S.Government, Companys obligations under this Agreement are conditioned upon the grant ofsuch approval and upon compliance by Customer with any restrictions imposed by the U.S.Government in connection with such approval, and (iii) in the event the Deliverables are tobe used in a nuclear facility, the Customer shall, prior to such use, arrange for insurance orgovernmental indemnity protecting Company against liability. The Customer hereby releasesand agrees to indemnify Company and its suppliers for any nuclear damage including, but notlimited to, loss of use, in any manner arising out of the nuclear incident, whether alleged to bedue, in whole or in part by Company or its suppliers.

g. No Inducements. Each party represents to each other that neither it nor any personacting on its behalf has, in contravention of any applicable law, given or offered to give or willgive or offer to give, any sum of money or other material consideration to any person, directlyor indirectly, as an inducement to obtain business hereunder or to influence the granting

of licenses or other governmental permissions to enter into this Agreement or performobligations hereunder. h. Equal Employment Opportunity. Company is a U.S. federal contractor that complies withExecutive Order 11246, as amended, and applicable regulations in 41 CFR Parts 60-1 through60-60, 29 U.S.C. 793 and applicable regulations in 41 CFR 60-741; and 38 U.S.C. 4212 andapplicable regulations in 41 CFR Part 60-250 and 60-300.THE FOLLOWING PROVISIONSARE INCORPORATED HEREIN BY REFERENCE:Executive Order 11246 and 41 CFR 60-4.3(a); Executive Order 11701 and 41 CFR 60-250.5(a), 60-300.5; Executive Order 11758and 41 CFR 60-741.5(a); U.S. immigration laws, including the L-1 Visa Reform Act of 2004and the H-1B Visa Reform Act of 2004; and Executive Order 13496. i. Ethical Business Conduct. Customer shall adopt and comply with Companys BusinessPartner Code of Conduct which is EXPRESSLY INCORPORATED HEREIN BY REFERENCE.

34. REPRESENTATIONS AND WARRANTIES. Customer represents, warrants andcovenants to Company that: (a) it has the right, power, and authority to enter into thisAgreement and fully perform its obligations hereunder; (b) it has all necessary rights in andto its respective Content and Marks for use within the scope of this Agreement, includingthe licenses granted herein; and (c) it complies, and at all times shall comply, with all laws,rules, and regulations in effect that are applicable to its performance under this Agreement,including obtaining all such approvals and/or permits as may be required hereunder.

35. NO THIRD-PARTY BENEFICIARY. Each party is entering into this Agreement solely

based on the representations contained herein for its own purposes and not for the benefit ofany third party.

36. NOTICES AND CHANGE OF ADDRESS. All notices or other communications underthis Agreement shall be in writing and delivered in person, or sent by receipted courier,express mail, e-mail, or postage prepaid certified or registered mail, addressed to the partyfor whom it is intended, at the addresses set forth in this Agreement. Either party maychange its address for notice by giving written notice to the other party. Any notice or othercommunication shall be deemed given no later than the date actually received. Notice bycourier, express mail, certified mail, or registered mail shall be deemed given on the date itis officially recorded as delivered and, in the absence of such record of delivery, it shall berebuttably presumed to have been delivered on the third Business Day after it was deposited.Notices sent by e-mail require tangible confirmation of receipt from addressee.

37. ASSIGNMENT. Customer may not assign this Agreement without the prior writtenconsent of Company. Company may assign its rights and delegate its duties under thisAgreement, without the prior consent of Customer, to an Affiliate, or to a third party in theevent of a spin-off, merger, business combination, consolidation or sale of all, or substantiallyall, of its assets or business that are related to this Agreement. The rights and duties in thisAgreement shall bind and inure to the benefit of any such assignee.

38. SEVERABILITY. If any provision of this Agreement is held to be invalid, illegal, orunenforceable under any statute, regulation, ordinance, executive order, or other rule of law,that provision will be deemed severed to the extent necessary to comply with such statute,regulation, ordinance, order, or rule. In the event such provision is deemed severed, the partieswill negotiate in good faith to arrive at an alternative arrangement approximating the originalbusiness objective of the parties. The remaining terms and conditions of this Agreement willremain in effect.

39. NO IMPLIED WAIVER.The failure of either party at any time to require performance bythe other party of any provision of this Agreement will in no way affect the right to requiresuch performance at any time thereafter, nor will the waiver of either party of a breach of anyprovision of this Agreement constitute a waiver of any succeeding breach of the same or anyother provision.

40. MISCELLANEOUS.(a) This Agreement does not make either party the agent or legalrepresentative of the other party. Neither party is authorized to create any obligation onbehalf of the other party including, but not limited to, the obligation for payment of anyservice or warranty obligation hereunder; (b) The rights and remedies herein reserved to

Company are cumulative and additional to any other rights and remedies provided at law orequity; (c) The official text of this Agreement is in the English language. If this Agreement istranslated into another language, the English text will govern any question with respect tointerpretation; (d) The headings in this Agreement are for convenience of reference only anddo not affect the meaning of this Agreement in any manner.

DEFINITIONS.Capitalized terms have the meanings set forth in this Section, or in the Section in which theyfirst appear in this Agreement.Agreementmeans these Allegion Terms and Conditions of Sale and Service, together witany applicable Country Supplement or Region Supplement provided by Company, and all ofthe documents referenced herein or therein.Affiliatemeans any Person that directly or indirectly, through one or more intermediaries,controls, is controlled by, or is under common control with, the Company. The termcontrol (including the terms controlled by and under common control with) meansthe possession, directly or indirectly, of the power to direct or cause the direction of themanagement and policies of a Person, whether through the ownership of voting securities, bycontract or otherwise.Business Day means any day except Saturday, Sunday or any other day on whichcommercial banks located in the United States are authorized or required by Law to be closedfor business.Company means Schlage Lock Company, LLC or any subsidiary or affiliate thereof sellingproducts that are part of the Allegion product portfolio. Schlage Lock Company and/or itssubsidiary or affiliates will be severally but not jointly liable under the Agreement.Company Marksrefers to the Marks of Company.Confidential Informationshall mean any and all information provided by either partyto the other party pertaining to the disclosing partys business. Confidential Informationshall include, but not be limited to, any bitting lists, formulae for products, manufacturingprocesses, production techniques, packaging processes, methods, research materials, ideas,marketing plans and related materials, quality standards, test results and data, apparatus,engineering drawings, contract documents, computer software, hardware, or firmware,business activities information such as financial information, reports, projections, booksand records, customer and supplier information, and operations, customer and supplier listsand data, specifications, know how, and other Proprietary Information or Trade Secrets (asdefined herein) that either party may furnish to the other party. Confidential Information

shall not include information that: (a) is or becomes publicly known if such public knowledgeor disclosure is not the result of any act or failure to act on the part of the receiving party;(b) is, at the time of disclosure, already known to the Receiving Party without utilizing theConfidential Information; (c) is information disclosed to the Receiving Party by a third partywhich is not to the Receiving Partys knowledge, after inquiry of the third party, under a dutyof confidentiality to the Disclosing Party; or (d) is independently developed by the ReceivingParty without the use of Confidential Information. The Receiving Party shall have the burdenof proof as to prior knowledge and absence of breach. Confidential Information may befurnished in any tangible or intangible form including, but not limited to, writings, drawings,computer and other electronic media, logic diagrams, component specifications, graphs,prototypes, samples, or verbal communications and regardless of whether such informationis marked or designated as confidential. For the avoidance of doubt, all information,knowledge or data disclosed by Company to Customer, regardless of whether disclosed inwritten, tangible, oral, visual or other form, including, without limitation, sample products,equipment, software, or other objects or material, provided by Company to Customer, and alinformation, knowledge or data which was obtained by Customer from visits to Companysfacilities, shall be considered Confidential Information under this Agreement.Contentmeans all information (including without limitation any text, music, sound,photographs, video, graphics, data or software), in any medium, on a particular CompanyWeb page or Website or in Marketing Materials.Customer means the purchaser of Deliverables from Company.Deliverablesmeans any good or service or both purchased by Customer from Company

under these General Terms and Conditions of Sale and Service.End Usersmeans the purchaser that (a) has acquired a Deliverable from Customer for (i)its own and its Affiliates/Affiliates internal use and not for resale, remarketing or distributionor (ii) incorporation into its own products and (b) is an individual or entity, other than anyfederal, state or local agency, office or division.IPmeans all intellectual property and industrial property rights comprising or relating to/of the following: (a) Patents; (b) Trademarks; (c) internet domain names, whether or notTrademarks, registered by any authorized private registrar or Governmental Authority, webaddresses, web pages, website and URLs; (d) works of authorship, expressions, designs anddesign registrations, whether or not copyrightable, including copyrights and copyrightableworks, software and firmware, application programming interfaces, architecture, files, recordsschematics, data, data files, and databases and other specifications and documentation; (e)Trade Secrets; and (f) all other intellectual property and industrial property rights, and allrights, interests and protections that are associated with, equivalent or similar to, or requiredfor the exercise of, any of the foregoing, however arising, in each case whether registered orunregistered and including all registrations and applications for, and renewals or extensionsof, such rights or forms of protection pursuant to the Laws of any jurisdiction throughout inany part of the world.Marketing Materialsmeans all marketing brochures, buckslips, pamphlets, emails, text,call scripts or other material, whether in printed format, audio or audiovisual format, or inany other format, that contain any (i) Content relating to the Company Deliverables or (ii)Company Marks.Marksmeans collectively the domain names, trademarks, trade names, service marks,trade dress, logos, and the like used or provided by either party for use in connection with thisAgreement.Patents means all patents (including all reissues, divisionals, provisionals, continuationsand continuations-in-part, re-examinations, renewals, substitutions and extensions thereof),patent applications, and other patent rights and any other Governmental Authority-issuedindicia of invention ownership (including inventors certificates, petty patents and patentutility models).Person means a person or entity.Price Books mean Companys current Price Book in effect for the applicable Deliverablebeing purchased by Customer.Trade Secretsmeans and includes business or technical information of either party,including processes, formulas, devices, techniques, compilations and other material thata party attempts to maintain in secret and that derive commercial value for such partyfrom not being generally known to the public or readily ascertainable through independentdevelopment or reverse engineering.


9/137

HINGES

1-059

59-437

438-1021

115

2-8190

8200-9340



vi

How to use this book

Products are shown in four groups; Hinges, Continuous Hinges, Pivots and Architectural Hardware. Each group isorganized in numerical order and no longer in alpha/numerical. Particularly in the Architectural Hardware group, theproducts are organized by the part number regardless of the prefix or suffix. Example WS33X Wall Stop will be innumerical sequence of 33; CS115 Crash Stop numerical sequence 115.

For convenience there are a few exceptions where an accessory follows the associated product; example, the COR72Coordinator is followed by MB1 Mounting Bracket.

The service parts section of previous books has been changed. Service parts for many products have been listed with theproduct. A full list of available service parts may be obtained from the Ives website. You may also contact your local salesrepresentative or Ives customer service for more assistance on the availability of service parts.

Information contained in the list price table:

Model:Column contains model family description and general catalog informationSubstrate:Column contains material substrate information (i.e. aluminum, brass, steel)Model Number:Column contains the model number and additional prefix for other distinguishing features or packagingtype. Package type prefixes (C, CGC, SC, SP, SPS) descriptions are as follows:

C CardedCGC Commercial Grade CardedSC Schlage Branded CardSP Slim PackSPS Schlage Branded Slim Pack

Item Number:Item number field is UPC number or sku number, where available.

Weight:Contains the total weight of product in box quantity. Not all weights shown.

Order Quantity: Contains the minimum order quantity for identified product, if required.

Box Quantity: Number of items in master carton or special package type.

Markings Cartons:Markings (e.g., door locations, stock reference numbers) on acknowledgements and individual prod-uct cartons will be provided at $2.00 each net. Products available to mark: Hinges, Continuous Hinges, Pivots, ProtectionPlates, Coordinators, Flush Bolts.


10/137


hinges3PB1 . . . . . . . . . . . . . . . 1,23CB1 . . . . . . . . . . . . . . 3,43CB1 HW . . . . . . . . . . . 53CB1 WT . . . . . . . . . . 6,73SP1 . . . . . . . . . . . . . . . . 75PB1 . . . . . . . . . . . . . . 8,95BB1 . . . . . . . . . . . . . 9,105BB1 HW . . . . . . . . . . . 11

5BB1 SC . . . . . . . . . . . 125BB1 WT. . . . . . . . .13,141010 . . . . . . . . . . . . 15, 521011 . . . . . . . . . . . . . 15, 521012 . . . . . . . . . . . . 15, 521020. . . . . . . . . . . .15, 521021 . . . . . . . . . . . . 15, 52

continuous hinges600 . . . . . . . . . . . . . . . 16602 . . . . . . . . . . . . . . . 16611. . . . . . . . . . . . . . . . . 1 6700 . . . . . . . . . . . . . . . 16702 . . . . . . . . . . . . . . . . 16705 . . . . . . . . . . . . . . . . 16711 . . . . . . . . . . . . . . . . . 16715 . . . . . . . . . . . . . . . . 16045HD . . . . . . . . . . . . 180 4 6 H D . . . . . . . . . . . . 1 8053HD . . . . . . . . . . . . 18054HD . . . . . . . . . . . . 18112HD . . . . . . . . . . . . . . 18157X4 . . . . . . . . . . . . . 18157HD . . . . . . . . . . . . . 19210HD . . . . . . . . . . . . . 19224HD. . . . . . . . . . . . . 1 9

pivots7212 . . . . . . . . . . . . . . .20

7212V . . . . . . . . . . . . . . 207215 . . . . . . . . . . . . . . .207215F . . . . . . . . . . . . . . 207222 . . . . . . . . . . . . . . .207226. . . . . . . . . . . . . . .207226F . . . . . . . . . . . . .207227 . . . . . . . . . . . . . . .207227F. . . . . . . . . . . . . . 2 07230F . . . . . . . . . . . . .207237F . . . . . . . . . . . . . . 207244F . . . . . . . . . . . . .207245F . . . . . . . . . . . . . 217253 . . . . . . . . . . . . . . . 217255 . . . . . . . . . . . . . . . 217255J . . . . . . . . . . . . . . 21

7256 . . . . . . . . . . . . . . 217259 . . . . . . . . . . . . . . 219110F . . . . . . . . . . . . . . 21

architectural hardware

CB1 . . . . . . . . . . . . . . . . 23DP1 . . . . . . . . . . . . . . . . 23LG1 . . . . . . . . . . . . . . . . 23M B 1 . . . . . . . . . . . . . . . 2 8DP2 . . . . . . . . . . . . . . . 23MB2 . . . . . . . . . . . . . . .28MB2F . . . . . . . . . . . . . . 28

MB2V . . . . . . . . . . . . . 282 . . . . . . . . . . . . . . . . . . 23MB3F . . . . . . . . . . . . . . 28MB3V . . . . . . . . . . . . . 28LG7 . . . . . . . . . . . . . . . . 23COR7G . . . . . . . . . . . . . 2307, . . . . . . . . . . . . . . . . 24COR9G . . . . . . . . . . . . 24FS9 . . . . . . . . . . . . . . . 24

LG10 . . . . . . . . . . . . . . . 24CL11 . . . . . . . . . . . . . . . 24LG11 . . . . . . . . . . . . . . . 24W S 1 1 . . . . . . . . . . . . . . 2 4WS11X . . . . . . . . . . . . . 25CL12 . . . . . . . . . . . . . . . 25LG12 . . . . . . . . . . . . . . . 25FS13 . . . . . . . . . . . . . . . 25LG13 . . . . . . . . . . . . . . . 25CL14 . . . . . . . . . . . . . . . 25LG14 . . . . . . . . . . . . . . . 25FS17 . . . . . . . . . . . . . . . 25R14 . . . . . . . . . . . . . . . . 25AS18 . . . . . . . . . . . . . . 25FS18 . . . . . . . . . . . . . . 25FL20 . . . . . . . . . . . . . . 28WS20 . . . . . . . . . . . . . 25WS20X . . . . . . . . . . . . 26CL21 . . . . . . . . . . . . . . . 26C L 2 1 A . . . . . . . . . . . . . 2 622 . . . . . . . . . . . . . . . . . 26CL22. . . . . . . . . . . . . . .2625 . . . . . . . . . . . . . . . . . 26026, . . . . . . . . . . . 26-27RL30 . . . . . . . . . . . . . . 2 7RL30A . . . . . . . . . . . . . 2 7FB31 . . . . . . . . . . . . . . . 27COR32 . . . . . . . . . . . . . 2 7FB32 . . . . . . . . . . . . . . 29

FL32. . . . . . . . . . . . . . . 2 8RL32 . . . . . . . . . . . . . . 29RL32A . . . . . . . . . . . . . 29FB33 . . . . . . . . . . . . . . 29W S 3 3 . . . . . . . . . . . . . 2 9WS33X . . . . . . . . . . . . 29RL36 . . . . . . . . . . . . . . 29RL36A . . . . . . . . . . . . . 29RL38 . . . . . . . . . . . . . . 2940 . . . . . . . . . . . . . 2 9-30F S 4 0 . . . . . . . . . . . . . . 3 0WS40 . . . . . . . . . . . . .30FB41 . . . . . . . . . . . . . . .30FS41 . . . . . . . . . . . . . . .3042 . . . . . . . . . . . . . . . . .30

COR42. . . . . . . . . . . . . 2 7FB42 . . . . . . . . . . . . . . 31FS42 . . . . . . . . . . . . . . 31FS43 . . . . . . . . . . . . . . 31FL44 . . . . . . . . . . . . . . 28WS45 . . . . . . . . . . . . . 31WS45X . . . . . . . . . . . . 31S48 . . . . . . . . . . . . . . . 31FB51 . . . . . . . . . . . . . . . 31COR52 . . . . . . . . . . . . . 28FB52 . . . . . . . . . . . . . . 32FB53 . . . . . . . . . . . . . . 32

054 . . . . . . . . . . . . . . . 32059 . . . . . . . . . . . . . . . 3259 . . . . . . . . . . . . . . . . . 3360 . . . . . . . . . . . . . . . . . 33060, . . . . . . . . . . . . . . . 33COR60 . . . . . . . . . . . . 28061 . . . . . . . . . . . . . . . . 3461 . . . . . . . . . . . . . 34-35FB61 . . . . . . . . . . . . . . . 35

FB62 . . . . . . . . . . . . . . 3563 . . . . . . . . . . . . . . . . . 3564 . . . . . . . . . . . . . . . . . 35SR64 . . . . . . . . . . . . . . 35SR65 . . . . . . . . . . . . . . 35WS65 . . . . . . . . . . . . . 350 6 6 . . . . . . . . . . . . . . . 3 666 . . . . . . . . . . . . . . . . . 36SR66 . . . . . . . . . . . . . . 3569 . . . . . . . . . . . . . . . . . 3670 . . . . . . . . . . . . . 36-3771 . . . . . . . . . . . . . . . . . . 3772 . . . . . . . . . . . . . . . . . 37COR72 . . . . . . . . . . . . . 2873 . . . . . . . . . . . . . . . . . 3790 . . . . . . . . . . . . . . . . . 37CS115 . . . . . . . . . . . . . . 37HB159 . . . . . . . . . . . . . 3 72 1 8 . . . . . . . . . . . . . . . . 3 8221 . . . . . . . . . . . . . . . . 38222 . . . . . . . . . . . . . . . . 38223 . . . . . . . . . . . . . . . . 38227 . . . . . . . . . . . . . . . . 38230 . . . . . . . . . . . . . . . . 38253 . . . . . . . . . . . . . . . . 392 6 1 . . . . . . . . . . . . . . . . 3 9262 . . . . . . . . . . . . . . . . 39265 . . . . . . . . . . . . . . . . 39325 . . . . . . . . . . . . . . . . 39

326 . . . . . . . . . . . . . . . . 39327 . . . . . . . . . . . . . . . . 39330 . . . . . . . . . . . . . . . . 39335 . . . . . . . . . . . . . . . . 39336 . . . . . . . . . . . . . . . . 39345 . . . . . . . . . . . . . . . 40347 . . . . . . . . . . . . . . . 40349 . . . . . . . . . . . . . . 40FB358 . . . . . . . . . . . . 40SB360 . . . . . . . . . . . . 40WS401-CVX .. . . . . 40WS401-CCV . . . . . . 40WS402-CVX .. . . . . 40WS402-CCV .. . . . . . 41WS404 . . . . . . . . . . . . 41

405 . . . . . . . . . . . . . . . 41WS406-CVX. . . . . . . 4 1WS406-CCV .. . . . . . 41WS407-CVX . . . . . . . 41WS407-CCV .......42FS410 . . . . . . . . . . . . . 42411 . . . . . . . . . . . . . . . . . 42430 . . . . . . . . . . . . . . . 42FS434 . . . . . . . . . . . . . 42R 4 3 5 . . . . . . . . . . . . . . 4 2FS436 . . . . . . . . . . . . . 42R437 . . . . . . . . . . . . . . 42

FS438 . . . . . . . . . . . . . 43F S 4 3 9 . . . . . . . . . . . . 4 3FS441 . . . . . . . . . . . . . 43WS443 . . . . . . . . . . . . 43FS444 . . . . . . . . . . . . . 43WS445 . . . . . . . . . . . . 43FS446 . . . . . . . . . . . . . 43W S 4 4 7 . . . . . . . . . . . . 4 4FS448 . . . . . . . . . . . . .44

WS449 . . . . . . . . . . . .44FS450 . . . . . . . . . . . . .44FS452 . . . . . . . . . . . . .44SB453 . . . . . . . . . 44-45FS455 . . . . . . . . . . . . . 45FB457 . . . . . . . . . . . . . 45FB458 . . . . . . . . . . . . . 45RB470 . . . . . . . . . . . . .45RB471 . . . . . . . . . . . . .45RB472 . . . . . . . . . . . . .45481 . . . . . . . . . . . . . . . .46482 . . . . . . . . . . . . . . .46F S 4 9 5 . . . . . . . . . . . . 4 6FS496 . . . . . . . . . . . . .46FS497 . . . . . . . . . . . . .46FS544 . . . . . . . . . . . . .46FS555 . . . . . . . . . . . . .46571 . . . . . . . . . . . . . . . . 47572 . . . . . . . . . . . . . . . . 47574 . . . . . . . . . . . . . . . .48575 . . . . . . . . . . . . . . . .48580 . . . . . . . . . . . . . . .485 8 1 . . . . . . . . . . . . 4 8 - 4 9582 . . . . . . . . . . . . . . . .49585. . . . . . . . . . . . . . . .49586 . . . . . . . . . . . . . . .49601 . . . . . . . . . . . . . . . .496 2 0 . . . . . . . . . . . . . . . 5 0STK685 . . . . . . . . . . .50

STK685L . . . . . . . . . .50U696 . . . . . . . . . . . . . . 50698 . . . . . . . . . . . . . . .507 0 0 . . . . . . . . . . . . . . . 5 0701 . . . . . . . . . . . . . . . .50VR810DT . . . . . . . . . .50VR814DT . . . . . . . . . .50VR810NL . . . . . . . . . .50VR814NL . . . . . . . . . .50VR810NL-V . . . . . . . .50VR814NL-V ........50AS895 . . . . . . . . . . . . .50VR900 . . . . . . . . . . . . 51VR904 . . . . . . . . . . . . 51VR900LLP . . . . . . . . 51

VR904LLP . . . . . . . . 51VR910DT . . . . . . . . . . 51VR914DT . . . . . . . . . . 51VR910NL . . . . . . . . . . 51VR914NL . . . . . . . . . . 51VR910M-DT . . . . . . . 51VR914M-DT . . . . . . . 51VR910M-NL . . . . . . . 51VR914M-NL . . . . . . . 51980 . . . . . . . . . . . . . . . 51990 . . . . . . . . . . . . . . . 519 9 1 . . . . . . . . . . . . . . . . 5 2

1010 . . . . . . . . . . . . 15, 521011 . . . . . . . . . . . . . 15, 521012 . . . . . . . . . . . . 15, 521020. . . . . . . . . . . .15, 521021 . . . . . . . . . . . . 15, 52RL1152 . . . . . . . . . . . . 53FS1153 . . . . . . . . . . . . . 53FS1154 . . . . . . . . . . . . . 53SB1600M1 . . . . . . . . .53

SB1600M2 . . . . . . . .53SB1630 . . . . . . . . . . . . 54SB1640 . . . . . . . . . . . . 5430X6. . . . . . . . . . . . . . 553107 . . . . . . . . . . . . . . . 5631251 . . . . . . . . . . . . . . 5631252 . . . . . . . . . . . . . . 568102 . . . . . . . . . . . . . . 608103 . . . . . . . . . . . 60-618103EZ . . . . . . . . . . . . 618105 . . . . . . . . . . . . . . . 618111 . . . . . . . . . . . . . . . . 628112 . . . . . . . . . . . . . . . 628121 . . . . . . . . . . . . . . . 628190 . . . . . . . . . . . . . . 628200 . . . . . . . . . . . . . . 638302 . . . . . . . . . . 64-658303 . . . . . . . . . . 66-678305 . . . . . . . . . . 67-688311 . . . . . . . . . . . . . . 698400 . . . . . . . . . . . 7 0-719100 . . . . . . . . . . . . . . 7 29103EZ . . . . . . . . .72-739190 . . . . . . . . . . .73-749264 . . . . . . . . . . . . . . 759264F . . . . . . . . . . . . . 759265 . . . . . . . . . . . . . . 759265F . . . . . . . . . . . . . 759266 . . . . . . . . . . . . . . 75

9266F . . . . . . . . . . . . . 759267 . . . . . . . . . . . . . . 759267F . . . . . . . . . . . . . 75

hobby hardware78 . . . . . . . . . . . . . . . . . 7686 . . . . . . . . . . . . . . . . . 769011 . . . . . . . . . . . . . . . 769031 . . . . . . . . . . . . . . . 769041 . . . . . . . . . . . . . . 769042 . . . . . . . . . . . . . . 769051 . . . . . . . . . . . . . . . 769070 . . . . . . . . . . . . . . 769071 . . . . . . . . . . . . . . . 769072 . . . . . . . . . . . . . . 76

9110 . . . . . . . . . . . . . . . 769120 . . . . . . . . . . . . . . . 769130 . . . . . . . . . . . . . . . 769210 . . . . . . . . . . . . . . . 769220 . . . . . . . . . . . . . . 769311 . . . . . . . . . . . . . . . 769320 . . . . . . . . . . . . . . 769321 . . . . . . . . . . . . . . . 769330 . . . . . . . . . . . . . . 769340 . . . . . . . . . . . . . . 76

Numerical IndexPart No. Page Part No. Page Part No. Page Part No. Page Part No. Page


11/137

HINGES

1-059

59-437

438-1021

115

2-8190

8200-9340



viii

IVES FINISH ANSI/BHMA US Number Finish Description Base Material

A3 666 US3 Bright Brass, Clear Coat Aluminum

A5 US5 Satin Brass, Blackened, Satin Relieved Aluminum

A10 668 US10 Satin Bronze, Clear Coat Aluminum

A10B 703 US10B Dark Bronze, Oil Rubbed Aluminum

A14 669 US14 Bright Nickel, Clear Coat Aluminum

A15 670 US15 Satin Nickel, clear Coat Aluminum

A19 671 US19 Flat Black Coated Aluminum

A26 672 US26 Bright Chrome Aluminum

A26D 702 US26D Satin Chrome Aluminum

A716 Aged Bronze Aluminum

A92 673 Aluminum Clear Coat Aluminum

A-Almond Almond Aluminum

A-BLK Black Aluminum

A-W White Aluminum

PA28 628 US28 Satin Aluminum, Clear Anodized Aluminum

B3 605 US3 Bright Brass, Clear Coat Brass/Bronze

B4 606 US4 Satin Brass, Clear Coat Brass/Bronze

B5 609 US5 Satin Brass, Blackened, Satin Relieved Brass/Bronze

B9 611 US9 Bright Bronze, Clear coat Brass/Bronze

B10 612 US10 Satin Bronze, Clear Coat Brass/Bronze

B10B 613 US10B Dark Bronze, Oil Rubbed Brass/Bronze

614 US10A Satin Bronze, Relieved, Clear Coated Brass/Bronze

616 US11 Satin Bronze, Blackened, Clear Coated Brass/Bronze

B14 618 US14 Bright Nickel, Clear Coat

B15 619 US15 Satin Nickel, Clear Coat Brass/Bronze

B15A 620 US15A Satin Nickel, Blackened, Satin Relieved Brass/Bronze

B26 625 US26 Bright Chrome Brass/Bronze

B26D 626 US26D Satin Chrome Brass/Bronze

B716 Aged Bronze Brass/Bronze

F2C 604 US2C Zink Plated Steel

F3 632 US3 Bright Brass, Clear Coat Steel

F4 633 US4 Satin Brass, Clear Coat SteelF5 638 US5 Satin Brass, Blackened, Satin Relieved Steel

F10 639 US10 Satin Bronze, Clear Coat Steel

F10B 640 US10B Dark Bronze, Oil Rubbed Steel

641 US10A Oxidized Satin Bronze, Relieved, Clear Coated Steel

643 US11 Satin Bronze, Blackened, Relieved, Clear Coated Steel

F14 645 US14 Bright Nickel, Clear Coat Steel

F15 646 US15 Satin Nickel, Clear Coated Steel

F26 651 US26 Bright Chrome Steel

F26D 652 US26D Satin Chrome Steel

664 US27 Satin Aluminum, Clear Anodized Aluminum Aluminum

F716 Aged Bronze Steel

F-W White SteelSP4 Dull Brass Painted All

SP10 691 Dull Bronze Painted All

SP28 689 Aluminum Painted All

SP313 695 Dark Bronze Painted All

SPBLK 622 Flat Black All

USP 600 USP Primed For Paint All

US32 629 US32 Bright Stainless Steel Stainless Steel

US32D 630 US32D Satin Stainless Steel Stainless Steel

US32D 654 Satin Stainless Steel Stainless Steel

Key to Finishes


12/137


13/137

HINGES

1-059

59-437

438-1021

115

2-8190

8200-9340



x

Notes


14/137



STEEL BASED BRASS / STAINLESS BASED

DESCRIPTION SIZE BHMA FINISH LIST BHMA FINISH LIST US REFERENCE BOX CASE NOTES

3PB1

Three KnucklePlain Bearing

Standard WeightFor use on standard

weight doors with mediumfrequency usage

Available in:Steel w/Steel PinBrass w/Brass Pin

Stainless w/Stainless Pin

Non-removable Pin(Steel Based 4.5 x 4.5 Hinges

add $3.00all others add $6.00 list)

Packed with:Wood and machine screws

Available options:SEC - Security Screws

HT - Hospital tip

RC - Round cornersSH - Security StudsSee page 14 for pricing

3.5"x3.5"

(89x89mm)

600 $9.30 ---- ---- USP 3 24

632 13.70 605 $47.80 US3 3 24

633 9.90 606 39.80 US4 3 24

639 10.40 612 37.10 US10 3 24

640 13.70 613 47.80 US10B 3 24

641 13.70 614 47.80 US10A 3 24

643 14.50 616 47.80 US11 3 24

646 14.50 619 47.80 US15 3 24651 13.70 625 50.50 US26 3 24

652 11.50 626 45.10 US26D 3 24

---- ---- 629 54.70 US32 3 24

---- ---- 630 52.50 US32D 3 24

4"x4"

(102x102mm)

600 10.30 ---- USP 3 24

632 15.30 605 53.80 US3 3 24

633 10.80 606 44.80 US4 3 24

639 11.50 612 41.90 US10 3 24

640 15.30 613 53.90 US10B 3 24

641 15.30 614 53.90 US10A 3 24

643 16.00 616 53.90 US11 3 24

646 16.00 619 53.90 US15 3 24651 15.30 625 56.80 US26 3 24

652 12.80 626 50.90 US26D 3 24

---- ---- 629 61.60 US32 3 24

---- ---- 630 59.20 US32D 3 24

4.5"x4"

(114x102mm)

600 5.60 ---- USP 3 24

632 11.00 605 31.10 US3 3 24

633 5.60 606 26.00 US4 3 24

639 6.80 612 24.10 US10 3 24

640 10.00 613 31.10 US10B 3 24

641 10.60 614 31.10 US10A 3 24

643 11.00 616 31.10 US11 3 24

646 11.00 619 31.10 US15 3 24651 11.00 625 32.80 US26 3 24

652 8.90 626 29.30 US26D 3 24

---- ---- 629 35.50 US32 3 24

---- ---- 630 34.50 US32D 3 24

4.5"x4.5"

(114x114mm)

600 5.60 ---- USP 3 24

632 11.00 605 31.10 US3 3 24

633 5.60 606 26.00 US4 3 24

639 6.80 612 24.10 US10 3 24

640 11.00 613 31.10 US10B 3 24

641 11.00 614 31.10 US10A 3 24

643 11.00 616 31.10 US11 3 24

646 11.00 619 31.10 US15 3 24

651 11.00 625 32.80 US26 3 24

652 6.80 626 29.30 US26D 3 24

---- ---- 629 35.50 US32 3 24

---- ---- 630 34.50 US32D 3 24

Note: Specify BHMA finish code when ordering.Shaded items may require extended lead time.


15/137

HINGES

1-059

59-437

438-1021

115

2-8190

8200-9340



2



3PB1


Standard Weight

For use on standardweight doors with mediumfrequency usage

5"x4.5"(127x114mm)

600 $ 26.60 ---- $ ---- USP 3 24

632 39.70 605 72.80 US3 3 24

633 28.20 606 60.60 US4 3 24

639 29.80 612 56.50 US10 3 24

640 39.70 613 72.80 US10B 3 24

641 39.70 614 72.80 US10A 3 24

643 41.30 616 72.80 US11 3 24

646 41.30 619 72.80 US15 3 24

651 39.70 625 76.70 US26 3 24652 33.10 626 68.70 US26D 3 24

---- ---- 629 83.20 US32 3 24

---- ---- 630 80.00 US32D 3 24



16/137





3PB1


Standard Weight

For use on standardweight doors with medium

frequency usage







HT - Hospital tipRC - Round corners

SH - Security StudsSee page 14 for pricing

3.5"x3.5"(89x89mm)

600 $21.90 ---- $ ---- USP 3 24

632 33.10 605 47.80 US3 3 24

633 23.40 606 39.80 US4 3 24

639 24.80 612 37.10 US10 3 24

640 33.10 613 47.80 US10B 3 24

641 33.10 614 47.80 US10A 3 24

643 34.50 616 47.80 US11 3 24

646 34.50 619 47.80 US15 3 24651 33.10 625 50.50 US26 3 24

652 27.60 626 45.10 US26D 3 24

---- ---- 629 54.70 US32 3 24

---- ---- 630 52.50 US32D 3 24

4"x4"

(102x102mm)

600 23.60 ---- ---- USP 3 24

632 35.50 605 53.90 US3 3 24

633 25.10 606 44.80 US4 3 24

639 26.70 612 41.90 US10 3 24

640 35.50 613 53.90 US10B 3 24

641 35.50 614 53.90 US10A 3 24

643 37.00 616 53.90 US11 3 24

646 37.00 619 53.90 US15 3 24651 35.50 625 56.80 US26 3 24

652 29.60 626 50.90 US26D 3 24

---- ---- 629 61.60 US32 3 24

---- ---- 630 59.20 US32D 3 24

4.5"x4"

(114x102mm)

600 13.30 ---- ---- USP 3 24

632 18.70 605 47.40 US3 3 24

633 13.30 606 39.40 US4 3 24

639 14.50 612 36.90 US10 3 24

640 13.30 613 47.40 US10B 3 24

641 13.30 614 47.40 US10A 3 24

643 18.70 616 47.40 US11 3 24

646 20.80 619 47.40 US15 3 24651 18.70 625 50.10 US26 3 24

652 16.70 626 44.70 US26D 3 24

---- ---- 629 54.30 US32 3 24

---- ---- 630 51.10 US32D 3 24

4.5"x4.5"

(114x114mm)

600 8.90 ---- ---- USP 3 24 NRP also in Fast Track

632 18.70 605 52.60 US3 3 24

633 13.30 606 39.40 US4 3 24

639 14.50 612 36.90 US10 3 24

640 18.70 613 52.60 US10B 3 24

641 18.70 614 47.40 US10A 3 24

643 18.70 616 47.40 US11 3 24

646 18.70 619 39.20 US15 3 24

651 18.70 625 50.10 US26 3 24

652 11.00 626 44.70 US26D 3 24 NRP also in Fast Track

---- ---- 629 54.30 US32 3 24

---- ---- 630 52.20 US32D 3 24



17/137

HINGES

1-059

59-437

438-1021

115

2-8190

8200-9340



4



3CB1

Full MortiseThree Knuckle

Concealed Bearing

Standard WeightFor use on standard

weight doors with mediumfrequency usage







HT - Hospital tip

RC - Round cornersSH - Security StudsTW - Electric Thru WireSee page 14 for pricing

5"x4.5"

(127x114mm)

600 $ 19.90 --- $ ---- USP 3 24

632 29.80 605 58.90 US3 3 24

633 21.00 606 49.20 US4 3 24

639 22.40 612 45.90 US10 3 24

640 29.80 613 58.90 US10B 3 24

641 29.80 614 58.90 US10A 3 24

643 31.00 616 58.90 US11 3 24

646 31.00 619 58.90 US15 3 24651 29.80 625 62.30 US26 3 24

652 24.80 626 55.70 US26D 3 24

---- ---- 629 67.60 US32 3 24

---- ---- 630 64.00 US32D 3 24

5"x5"

(127x127mm)

600 35.60 ---- ---- USP 3 24

632 53.40 605 58.90 US3 3 24

633 37.90 606 49.20 US4 3 24

639 40.10 612 45.90 US10 3 24

640 53.40 613 58.90 US10B 3 24

641 53.40 614 58.90 US10A 3 24

643 55.70 616 58.90 US11 3 24

646 55.70 619 58.90 US15 3 24651 53.40 625 62.30 US26 3 24

652 44.50 626 55.70 US26D 3 24

---- ---- 629 67.60 US32 3 24

---- ---- 630 65.00 US32D 3 24



18/137





3CB1 HW

Full MortiseThree Knuckle

Concealed BearingHeavy Weight

For use on heavyweight doors with medium

frequency usage







HT - Hospital tipRC - Round cornersSH - Security

Ives Price Book Revised 8_14

Documents

Transcript of Ives Price Book Revised 8_14