IRISH STANDARDS PUBLISHED BASED ON CEN/CENELEC … · 6. I.S. ENV 1996-3:1999 Eurocode 6: Design of...

IRISH STANDARDS PUBLISHED BASED ON CEN/CENELEC STANDARDS

I.S. ENV 1402-8:19991.

Unshaped refractory products - Part 8: Determination of complementary properties

14 APRIL 2000Date published

I.S. ENV 1627:19992.

Windows, doors, shutters - Burglar resistance - Requirements and classification


I.S. ENV 1628:19993.

Windows, doors, shutters - Burglar resistance - Test method for the determination ofresistance under static loading


I.S. ENV 1629:19994.

Windows, doors, shutters - Burglar resistance - Test method for the determination ofresistance under dynamic loading


I.S. ENV 1630:19995.

Windows, doors, shutters - Burglar resistance - Test method for the determination ofresistance to manual burglary attempts


I.S. ENV 1996-3:19996.

Eurocode 6: Design of masonry structures - Part 3: Simplified calculation methods andsimple rules for masonry structures


I.S. ENV 12625-2:19997.

Tissue paper and tissue products - Part 2: Procedures for sampling and conditioning


I.S. ENV 13321-1:19998.

Data communication for HVAC application automation net - Part 1: BACnet, Profibus,World FIP


I.S. ENV ISO 13438:19999.

Geotextiles and geotextile-related products - Screening test method for determining theresistance to oxidation (ISO/TR 13438:1999)


I.S. ENV 387:199910.

Glued laminated timber - Large finger joints - Performance requirements and minimumproduction requirements


I.S. ENV 1300:199911.

Secure storage units - Classification for high security locks according to their resistanceto unauthorized opening


I.S. ENV 12299:199912.

Railway applications - Ride comfort for passengers - Measurement and evaluation


Date: 18/07/2018

I.S. ENV 13372:199913.

Road Traffic and Transport Telematics (RTTT) - Dedicated Short-Range Communication(DSRC) - DSRC Profiles for RTTT Applications


I.S. ENV 1186-13:199914.

Materials and articles in contact with foodstuffs - Plastics - Part 13: Test method foroverall migration at high temperatures


I.S. ENV 1186-14:199915.

Materials and articles in contact with foodstuffs - Plastics - Part 14: Test methods for‘substitute tests’ for overall migration from plastics intended to come into contact withfatty foodstuffs using test media iso-octane and 95% ethanol


I.S. ENV 1402-4:199916.

Unshaped refractory products - Part 4: Determinations of consistency of castables


I.S. ENV 1402-5:199917.

Unshaped refractory products - Part 5: Preparation and treatment of test pieces


I.S. ENV 1997-2:199918.

Eurocode 7: Geotechnical design -Part 2: Design assisted by laboratory testing


I.S. ENV 13130-1:199919.

Materials and articles in contact with foodstuffs - Plastics substances subject to limitation- Part 1: Guide to the test methods for the specific migration of substances from plasticsinto foods and food simulants and the determination of substances in plastics and theselection of conditions of exposure to food simulants


I.S. ENV 13130-2:199920.

Materials and articles in contact with foodstuffs - Plastics substances subject to limitation- Part 2: Determination of terephthalic acid in food simulants


I.S. ENV 13130-3:199921.

Materials and articles in contact with foodstuffs - Plastics substances subject ot limitation- Part 3: Determination of acrylonitrile in food and food simulants


I.S. ENV 13130-4:199922.

Materials and articles in contact with foodstuffs - Plastics substances subject to limitation- Part 4: Determination of 1,3-butadiene in plastics


I.S. ENV 13130-5:199923.

Materials and articles in contact with foodstuffs - Plastics substances subject to limitation- Part 5: Determination of vinylidene chloride in food simulants


I.S. ENV 13130-6:199924.

Materials and articles in contact with foodstuffs - Plastics substances subject to limitation- Part 6: Determination of vinylidene chloride in plastics


Date: 18/07/2018

I.S. ENV 13130-7:199925.

Materials and articles in contact with foodstuffs - Plastics substances subject to limitation- Part 7: Determination of monoethylene glycol and diethylene glycol in food simulants


I.S. ENV 13130-8:199926.

Materials and articles in contact with foodstuffs - Plastics substances subject to limitation- Part 8: Determination of isocyanates in plastics


I.S. ENV 50166-1:199527.

Human exposure to electromagnetic fields - Low-frequency (0 Hz to 10 kHz)


I.S. ENV 50166-2:199528.

Human exposure to electromagnetic fields - High frequency (10 kHz to 300 GHz)


I.S. ENV 1995-1-2:199429.

Eurocode 5: Design of timber structures – Part 1-2: General rules – Structural fire design


I.S. ENV 1993-6:199930.

Eurocode 3: Design of steel structures -Part 6: Crane supporting structures


I.S. ENV 13004:199931.

Nomenclature system for medical devices for thew purposes of regulatory dataexchange – Recommendations for an interim system and rules for a future


I.S. ENV 1997-3:199932.

Eurocode 7: Geotechnical design - Part 3: Design assisted by fieldtesting


I.S. ENV ISO 8502-1:199933.

Preparation of steel substrates before application of paints and related products - Testsfor the assessment of surface cleanliness - Part 1: Field test for soluble iron corrosionproducts (ISO/TR 8502-1:1991)


I.S. ENV 10169-2:199934.

Continuously organic coated (coil coated) steel flat products - Part 2: Products forbuilding exterior applications


I.S. ENV 12940:199935.

Footwear manufacturing wastes - Waste classification and management


I.S. ENV 13376:199936.

Geographic information - Data description - Rules for application schemes


I.S. 343:200037.

Food Safety Management Incorporating Hazard Analysis and Critical Control Point(HACCP)


Date: 18/07/2018

I.S. EN 60601-2-25:1995/A1:200038.

Medical electrical equipment -- Part 2-25: Particular requirements for the safety ofelectrocardiographs (IEC 60601-2-25:1993/A1:1999 (EQV))

7 JANUARY 2000Date published

I.S. EN 60603-14:200039.

Connectors for frequencies below 3 MHz for use with printed boards -- Part 14: Detailspecification for circular connectors for low-frequency audio and video applications suchas audio, video and audio-visual equipment (IEC 60603-14:1998 (EQV))


I.S. EN 60609-2:200040.

Cavitation pitting evaluation in hydraulic turbines, storage pumps and pump-turbines --Part 2: Evaluation in Pelton turbines (IEC 60609-2:1997 (EQV))


I.S. EN 60695-11-20:200041.

Fire hazard testing -- Part 11-20: Test flames - 500 W flame test methods (IEC 60695-11-20:1999 (EQV))


I.S. EN 60730-1:1995/A16:200042.

Automatic electrical controls for household and similar use -- Part 1: Generalrequirements


I.S. EN 60811-5-1:200043.

Insulating and sheathing materials of electric and optical cables - Common test methods-- Part 5-1: Methods specific to filling compounds - Drop point - Separation of oil - Lowertemperature brittleness - Total acid number - Absence of corrosive components -Permittivity at 23 ∞C - D.C. resistivity at 23 ∞C and 100 ∞C (IEC 60811-5-1:1990


I.S. EN 60966-1:200044.

Radio frequency and coaxial cable assemblies -- Part 1: Generic specification - Generalrequirements and test methods (IEC 60966-1:1999 (EQV))


I.S. EN 60976:200045.

Medical electrical equipment - Medical electron accelerators - Functional performancecharacteristics (IEC 60976:1989 (EQV))


I.S. EN 186310:200046.

Sectional Specification: Connector sets for optical fibres and cables - Type MF


I.S. EN 60086-1:1997/A2:200047.

Primary batteries -- Part 1: General (IEC 60086-1:1996/A2:1999 (EQV))


I.S. EN 60335-2-6:200048.

Safety of household and similar electrical appliances -- Part 2-6: Particular requirementsfor stationary cooking ranges, hobs, ovens and similar appliances for household use(IEC 60335-2-6:1997 (MOD) + corrigendum Mar. 1998 (EQV))


I.S. EN 60335-2-21:200049.

Safety of household and similar electrical appliances -- Part 2-21: Particularrequirements for storage water heaters (IEC 60335-2-21:1997 (MOD) + corrigendumApr. 1998 (EQV))


Date: 18/07/2018

I.S. EN 62019:200050.

Electrical accessories - Circuit-breakers and similar equipment for household use -Auxiliary contact units (IEC 62019:1999 (EQV))


I.S. EN 61837-1:200051.

Surface mounted piezoelectric devices for frequency control and selection - Standardoutlines and terminal lead connections -- Part 1: Plastic moulded enclosure outlines (IEC61837-1:1999 (EQV))


I.S. EN 61964:200052.

Integrated circuits - Memory devices pin configurations (IEC 61964:1999 (EQV))


I.S. EN 61300-3-6:1997/A2:200053.

Fibre optic interconnecting devices and passive components - Basic test andmeasurement procedures -- Part 3-6: Examinations and measurements - Return loss(IEC 61300-3-6:1997/A2:1999 (EQV))


I.S. 820:200054.

Non-domestic gas installations

28 MARCH 2000Date published

I.S. EN 267:200055.

Forced draught oil burners - Definitions, requirements, testing, marking


I.S. EN 313-2:200056.

Plywood - Classification and terminology - Part 2: Terminology


I.S. EN 316:200057.

Wood fibreboards - Definition, classification and symbols


I.S. EN 461:200058.

Specification for dedicated liquefied petroleum gas appliances - Flueless non-domesticspace heaters not exceeding 10 kW


I.S. EN ISO 642:200059.

Steel - Hardenability test by end quenching (Jominy test) (ISO 642:1999)


I.S. EN ISO 683-17:200060.

Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearingsteels (ISO 683-17:1999)


I.S. EN 777-1:200061.

Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part1: System D, safety


I.S. EN 777-2:200062.

Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part2: System E, safety


Date: 18/07/2018

I.S. EN 848-3:200063.

Safety of woodworking machines - One side moulding machines with rotating tool -Part 3: Numerical control (NC) boring machines and routing machines


I.S. EN 877:200064.

Cast iron pipes and fittings, their joints and accessories for the evacuation of water frombuildings - Requirements, test methods and quality assurance


I.S. EN 893:200065.

Mountaineering equipment - Crampons - Safety requirements and test methods


I.S. EN ISO 898-1:200066.

Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts,screws and studs (ISO 898-1:1999)


I.S. EN 900:200067.

Chemicals used for treatment of water intended for human consumption - Calciumhypochlorite


I.S. EN 901:200068.

Chemicals used for treatment of water intended for human consumption - Sodiumhypochlorite


I.S. EN 912:200069.

Timber fasteners - Specifications for connectors for timber


I.S. EN 938:200070.

Chemicals used for treatment of water intended for human consumption - Sodiumchlorite


I.S. EN 939:200071.

Chemicals used for treatment of water intended for human consumption - Hydrochloricacid


I.S. EN 962:1996/A1:200072.

Transportable gas cylinders - Valve protection caps and valve guards for industrial andmedical gas cylinders - Design, construction and tests


I.S. EN 980:1996/A1:200073.

Graphical symbols for use in the labelling of medical devices


I.S. EN 1015-9:200074.

Methods of test for mortar for masonry - Part 9: Determination of workable life andcorrection time of fresh mortar


I.S. EN 1015-10:200075.

Methods of test for mortar for masonry -Part 10: Determination of dry bulk density of hardened mortar


Date: 18/07/2018

I.S. EN 1015-11:200076.

Methods of test for mortar for masonry -Part 11: Determination of flexural and compressive strength of hardened mortar


I.S. EN 1052-2:200077.

Methods of test for masonry - Part 2: Determination of flexural strength


I.S. EN 1075:200078.

Timber structures - Test methods - Joints made with punched metal plate fasteners


I.S. EN 1097-4:200079.

Tests for mechanical and physical properties of aggregates - Part 4: Determination ofthe voids of dry compacted filler


I.S. EN 1169:200080.

Precast concrete products - General rules for factory production control of glass-fibrereinforced cement


I.S. EN ISO 1183-3:200081.

Plastics - Methods for determining the density of non-cellular plastics - Part 3: Gaspyknometer method (ISO 1183-3:1999)


I.S. EN 1218-1:200082.

Safety of woodworking machines - Tenoning machines - Part 1: Single end tenoningmachines with sliding table


I.S. EN 1253-4:200083.

Gullies for buildings - Part 4: Access covers


I.S. EN 1265:200084.

Noise test code for foundry machines and equipment


I.S. EN 1267:200085.

Valves - Test of flow resistance using water as test fluid


I.S. EN 1319:1998/A2:200086.

Domestic gas-fired forced convection air heaters for space heating, with fan-assistedburners not exceeding a net heat input of 70 kW


I.S. EN 1380:200087.

Timber structures - Test methods - Load bearing nailed joints


I.S. EN 1381:200088.

Timber structures - Test methods - Load bearing stapled joints


I.S. EN 1382:200089.

Timber structures - Test methods - Withdrawal capacity of timber fasteners

4 FEBRUARY 2000Date published

Date: 18/07/2018

I.S. EN 1383:200090.

Timber structures - Test methods - Pull through resistance of timber fasteners


I.S. EN 1425:200091.

Bitumen and bituminous binders - Characterization of perceptible properties


I.S. EN 1426:200092.

Bitumen and bituminous binders - Determination of needle penetration


I.S. EN 1427:200093.

Bitumen and bituminous binders - Determination of softening point - Ring and Ballmethod


I.S. EN 1428:200094.

Bitumen and bituminous binders - Determination of water content in bitumen emulsions -Azeotropic distillation method


I.S. EN 1429:200095.

Bitumen and bituminous binders - Determination of residue on sieving of bitumenemulsions, and determination of storage stability by sieving


I.S. EN 1430:200096.

Bitumen and bituminous binders - Determination of particle polarity of bitumenemulsions


I.S. EN 1431:200097.

Bitumen and bituminous binders - Determination of recovered binder and oil distillatefrom bitumen emulsions by distillation


I.S. EN 1516:200098.

Surfaces for sports areas - Determination of resistance to indentation


I.S. EN 1569:200099.

Surfaces for sports areas - Determination of the behaviour under a rolling load


I.S. EN 1593:2000100.

Non-destructive testing - Leak testing - Bubble emission techniques


I.S. EN 1651:2000101.

Paragliding equipment - Harnesses - Safety requirements and strength tests


I.S. EN ISO 1680:2000102.

Acoustics - Test code for the measurement of airborne noise emitted by rotatingelectrical machinery (ISO 1680:1999)


I.S. EN 1723:2000103.

Light conveyor belts - Method of test for the determination of the relaxed elastic modulus


Date: 18/07/2018

I.S. EN 1779:2000104.

Non-destructive testing - Leak testing - Criteria for method and technique selection


I.S. EN 1807:2000105.

Safety of woodworking machines - Band sawing machines


I.S. EN 1865:2000106.

Specifications for stretchers and other patient handling equipment used in roadambulances


I.S. EN 1902:2000107.

Adhesives - Test methods for adhesives for floor coverings and wall coverings - Shearcreep test


I.S. EN 1903:2000108.

Adhesives - Test method for adhesives for plastic or rubber floor coverings or wallcoverings - Determination of dimensional changes after accelerated ageing


I.S. EN 1937:2000109.

Test method for hydraulic setting floor smoothing and/or levelling compounds - Standardmixing procedures


I.S. ENV 1993-1-6:2000110.

Eurocode 3: Design of steel structures - Part 1-6: General rules - Supplementary rulesfor the shell structures


I.S. ENV 1993-1-7:2000111.

Eurocode 3: Design of steel structures - Part 1-7: General rules - Supplementary rulesfor planar plated structural elements with out of plane loading


I.S. ENV 1993-4-1:2000112.

Eurocode 3: Design of steel structures - Part 4-1: Silos, tanks and pipelines - Silos


I.S. ENV 1993-4-2:2000113.

Eurocode 3: Design of steel structures -Part 4-2: Silos, tanks and pipelines - Tanks


I.S. ENV 1993-4-3:2000114.

Eurocode 3: Design of steel structures -Part 4-3: Silos, tanks and pipelines - Pipelines


I.S. EN ISO 2450:2000115.

Cream - Determination of fat content - Gravimetric method (Reference method)(ISO 2450:1999)


I.S. EN ISO 5270:2000116.

Pulps - Laboratory sheets - Determination of physical properties (ISO 5270:1998)


Date: 18/07/2018

I.S. EN ISO 6103:2000117.

Bonded abrasive products - Permissible unbalances of grinding wheels as delivered -Testing (ISO 6103:1999)


I.S. EN ISO 6506-1:2000118.

Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:1999)


I.S. EN ISO 6506-2:2000119.

Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testingmachines (ISO 6506-2:1999)


I.S. EN ISO 6506-3:2000120.

Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks(ISO 6506-3:1999)


I.S. EN ISO 6508-1:1999121.

Metallic materials - Rockwell hardness test - Part 1: Test method (scales A, B, C, D, E,F, G, H, K, N, T) (ISO 6508-1:1999)


I.S. EN ISO 6508-2:2000122.

Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testingmachines (scales A, B, C, D, E, F, G H, K, N, T) (ISO 6508-2:1999)


I.S. EN ISO 6508-3:2000123.

Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks(scales A, B, C, D, E, F, G, H, K, N, T) (ISO 6508-3:1999)


I.S. EN ISO 7085:2000124.

Mechanical and performance requirements of case hardened and tempered metricthread rolling screws (ISO 7085:1999)


I.S. EN ISO 7500-1:2000125.

Metallic materials - Verification of static uniaxial testing machines -Part 1: Tension/compression testing machines (ISO 7500-1:1999)


I.S. EN ISO 9241-16:2000126.

Ergonomic requirements for office work with visual display terminals (VDTs) -Part 16: Direct manipulation dialogues (ISO 9241-16:1999)


I.S. EN ISO 9917-2:2000127.

Dental water-based cements - Part 2: Light-activated cements (ISO 9917-2:1998)


I.S. EN ISO 10079-1:2000128.

Medical suction equipment - Part 1: Electrically powered suction equipment - Safetyrequirements (ISO 10079-1:1999)


I.S. EN ISO 10079-2:2000129.

Medical suction equipment - Part 2: Manually powered suction equipment (ISO 10079-2:1999)


Date: 18/07/2018

I.S. EN ISO 10079-3:2000130.

Medical suction equipment - Part 3: Suction equipment powered from a vacuum orpressure source (ISO 10079-3:1999)


I.S. EN 10228-4:2000131.

Non-destructive testing of steel forgings - Part 4: Ultrasonic testing of austenitic andaustenitic-ferritic stainless steel forgings


I.S. EN 10243-1:2000132.

Steel die forgings - Tolerances on dimensions - Part 1: Drop and vertical press forgings


I.S. EN 10243-2:2000133.

Steel die forgings - Tolerances on dimensions - Part 2: Upset forging made on horizontalforging machines


I.S. EN 10250-1:2000134.

Open die steel forgings for general engineering purposes - Part 1: General requirements


I.S. EN 10254:2000135.

Steel closed die forgings - General technical delivery conditions


I.S. EN 10269:2000136.

Steels and nickel alloys for fasteners with specified elevated and/or low temperatureproperties


I.S. EN ISO 10510:2000137.

Tapping screw and washer assemblies with plain washers (ISO 10510:1999)


I.S. EN ISO 10618:2000138.

Carbon fibre - Determination of tensile properties of resin-impregnated yarns(ISO 10618:1999)


I.S. EN ISO 10669:2000139.

Plain washers for tapping screw and washer assemblies - Normal and large series -Product grade A (ISO 10669:1999)


I.S. EN ISO 10664:2000140.

Hexalobular internal driving feature for bolts and screws (ISO 10664:1999)


I.S. EN ISO 10666:2000141.

Drilling screws with tapping screw thread - Mechanical and functional properties(ISO 10666:1999)


I.S. EN ISO 11130:2000142.

Corrosion of metals and alloys - Alternate immersion test in salt solution(ISO 11130:1999)


Date: 18/07/2018

I.S. EN ISO 11199-2:2000143.

Walking aids manipulated by both arms - Requirements and test methods -Part 2: Rollators (ISO 11199-2:1999)


I.S. EN ISO 11670:2000144.

Lasers and laser-related equipment - Test methods for laser beam parameters - Beampositional stability (ISO 11670:1999)


I.S. EN 12039:2000145.

Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determinationof adhesion of granules


I.S. EN 12051:2000146.

Building hardware - Door and window bolts - Requirements and test methods


I.S. EN 12182:2000147.

Technical aids for disabled persons - General requirements and test methods


I.S. EN 12221-1:2000148.

Changing units for domestic use - Part 1: Safety requirements


I.S. EN 12221-2:2000149.

Changing units for domestic use -Part 2: Test methods


I.S. EN 12227-1:2000150.

Playpens for domestic use -Part 1: Safety requirements


I.S. EN 12227-2:2000151.

Playpens for domestic use -Part 2: Test methods


I.S. EN 12294:2000152.

Plastics piping systems - Systems for hot and cold water - Test method for leaktightnessunder vacuum


I.S. EN 12295:2000153.

Plastics piping systems - Thermoplastics pipes and associated fittings for hot and coldwater - Test method for resistance of joints to pressure cycling


I.S. EN 12310-1:2000154.

Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing -Determination of resistance to tearing (nail shank)


I.S. EN 12311-1:2000155.

Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing -Determination of tensile properties


Date: 18/07/2018

I.S. EN 12316-1:2000156.

Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing -Determination of peel resistance of joints


I.S. EN 12317-1:2000157.

Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing -Determination of shear resistance of joints


I.S. EN 12324-2:2000158.

Irrigation techniques - Reel machine systems - Part 2: Specifications of polyethylenetubes for reel machines


I.S. EN 12324-3:2000159.

Irrigation techniques - Reel machine systems - Part 3: Presentation of technicalcharacteristics


I.S. EN 12324-4:2000160.

Irrigation techniques - Reel machine systems - Part 4: Check list of users requirements


I.S. EN 12325-2:2000161.

Irrigation techniques - Centre pivot and moving lateral systems - Part 2: Minimumperformances and technical characteristics


I.S. EN 12325-3:2000162.

Irrigation techniques - Centre pivot and moving lateral systems - Part 3: Terminologyand classification


I.S. EN 12350-1:2000163.

Testing fresh concrete - Part 1: Sampling


I.S. EN 12350-2:2000164.

Testing fresh concrete - Part 2: Slump test


I.S. EN 12350-3:2000165.

Testing fresh concrete - Part 3: Vebe test


I.S. EN 12350-4:2000166.

Testing fresh concrete - Part 4: Degree of compactability


I.S. EN 12350-5:2000167.

Testing fresh concrete - Part 5: Flow table test


I.S. EN 12350-6:2000168.

Testing fresh concrete - Part 6: Density


I.S. EN 12351:2000169.

Industrial valves - Protective caps for valves with flanged connections


Date: 18/07/2018

I.S. EN 12402:2000170.

Lead and lead alloys - Methods of sampling for analysis


I.S. EN 12409:2000171.

Rubber and plastics machines - Thermoforming machines - Safety requirements


I.S. EN 12414:2000172.

Vehicle parking control equipment - Pay and display ticket machine - Technical andfunctional requirements


I.S. EN 12433-1:2000173.

Industrial, commercial and garage doors and gates - Terminology - Part 1: Types ofdoors


I.S. EN 12433-2:2000174.

Industrial, commercial and garage doors and gates - Terminology - Part 2: Parts ofdoors


I.S. EN 12455:2000175.

Resilient floor coverings - Specification for corkment underlay


I.S. EN 12507:2000176.

Transportation services - Guidance notes on the application of EN ISO 9002 to the roadtransportation, storage and distribution industries


I.S. EN 12534:2000177.

Welding consumables - Wire electrodes, wires, rods and despoits for gas shielded metalarc welding of high strength steels - Classification


I.S. EN 12543-4:2000178.

Non-destructive testing - Characteristics of focal spots in industrial X-ray systems foruse in non-destructive testing -Part 4: Edge method


I.S. EN 12543-1:2000179.

Non-destructive testing - Characteristics of focal spots in industrial X-ray systems foruse in non-destructive testing - Part 1: Scanning method


I.S. EN 12543-2:2000180.

Non-destructive testing - Characteristics of focal spots in industrial X-ray systems foruse in non-destructive testing - Part 2: Pinhole camera radiographic method


I.S. EN 12543-3:2000181.

Non-destructive testing - Characteristics of focal spots


I.S. EN 12543-5:2000182.

Non-destructive testing - Characteristics of focal spots in industrial X-ray systems foruse in non-destructive testing - Part 5: Measurement of the effective focal spot size ofmini and micro focus X-ray tubes


Date: 18/07/2018

I.S. EN 12544-1:2000183.

Non-destructive testing - Measurement and evaluation of the X-ray tube voltage -Part 1: Voltage divider method


I.S. EN 12544-3:2000184.

Non-destructive testing - Measurement and evaluation of the X-ray tube voltage -Part 3: Spectrometric method


I.S. EN 12548:2000185.

Lead and lead alloys - Lead alloy ingots for electric cable sheathing and for sleeves


I.S. EN 12569:2000186.

Industrial valves - Valves for chemical and petrochemical process industry -Requirements and tests


I.S. EN 12586:2000187.

Child care articles - Soother holder - Safety requirements and test methods


I.S. EN 12606-1:2000188.

Bitumen and bituminous binders - Determination of the parafin wax content - Part 1:Method by distillation


I.S. EN 12606-2:2000189.

Bitumen and bituminous binders - Determination of the paraffin wax content - Part 2:Method by extraction


I.S. EN 12607-1:2000190.

Bitumen and bituminous binders - Determination of the resistance to hardening underthe influence of heat and air - Part 1: RTFOT method


I.S. EN 12607-2:2000191.

Bitumen and bituminous binders - Determination of the resistance to hardening underthe influence of heat and air - Part 2: TFOT Method


I.S. EN 12607-3:2000192.

Bitumen and bituminous binders - Determination of the resistance to hardening underthe influence of heat and air - Part 3: RFT method


I.S. EN 12659:2000193.

Lead and lead alloys - Lead


I.S. EN 12679:2000194.

Non-destructive testing - Determination of the size of industrial radiographic sources -Radiographic method


I.S. EN 12703:2000195.

Adhesive for paper and board, packaging and disposable sanitary products -Determination of low temperature flexibility or cold crack temperature


Date: 18/07/2018

I.S. EN 12743:2000196.

Footwear - Test methods for outsoles - Compression energy


I.S. EN 12744:2000197.

Footwear - Test methods for insoles - Delamination resistance


I.S. EN 12745:2000198.

Footwear - Test methods for insoles - Heel pin holding strength


I.S. EN 12255-5:2000199.

Wastewater treatment plants - Part 5: Lagooning processes


I.S. EN 12749:2000200.

Footwear - Ageing conditioning


I.S. EN 12747:2000201.

Footwear - Test methods for insoles - Abrasion resistance


I.S. EN 12748:2000202.

Footwear - Test methods for outsoles, insoles, lining and insocks - Water solublecontent


I.S. EN 12752-1:2000203.

Gas-fired type B tumble dryers of nominal heat input not exceeding 20 kW - Part 1:Safety


I.S. EN 12752-2:2000204.

Gas-fired type B tumble dryers of nominal heat input not exceeding 20 kW -Part 2: Rational use of energy


I.S. EN 12760:2000205.

Valves - Socket welding ends for steel valves


I.S. EN 12786:2000206.

Safety of machinery - Guidance for the drafting of the vibration clauses of safetystandards


I.S. EN 12868:2000207.

Child use and care articles - Methods for determining the release of N-Nitrosamines andN-Nitrosatable substances from elastomer or rubber teats and soothers


I.S. EN 12877-1:2000208.

Colouring materials in plastics - Determination of colour stability to heat duringprocessing of colouring materials in plastics - Part 1: General introduction


I.S. EN 12877-2:2000209.

Colouring materials in plastics - Determination of colour stability to heat duringprocessing of colouring materials in plastics - Part 2: Determination by injectionmoulding


Date: 18/07/2018

I.S. EN 12877-3:2000210.

Colouring materials in plastics - Determination of colour stability to heat duringprocessing of colouring materials in plastics - Part 3: Determination by oven test


I.S. EN 12877-4:2000211.

Colouring materials in plastics - Determination of colour stability to heat duringprocessing of colouring materials in plastics - Part 4: Determination by two-roll milling


I.S. EN 12901:2000212.

Products used for treatment of water intended for human consumption - Inorganicsupporting and filtering materials - Definitions


I.S. EN 12902:2000213.

Products used for treatment of water intended for human consumption - Inorganicsupporting and filtering materials - Methods of test


I.S. EN 12903:2000214.

Products used for treatment of water intended for human consumption - Powderedactivated carbon


I.S. EN 12904:2000215.

Products used for treatment of water intended for human consumption - Sand andgravel


I.S. EN 12905:2000216.

Products used for treatment of water intended for human consumption - Expandedaluminosilicate


I.S. EN ISO 14031:2000217.

Environmental management – Environmental performance evaluation – Guidelines(ISO 14031:1999)


I.S. EN 12906:2000218.

Products used for treatment of water intended for human consumption - Pumice


I.S. EN 12907:2000219.

Products used for treatment of water intended for human consumption - Pyrolised coalmaterial


I.S. EN 12909:2000220.

Products used for treatment of water intended for human consumption - Anthracite


I.S. EN 12910:2000221.

Products used for treatment of water intended for human consumption - Garnet


I.S. EN 12911:2000222.

Products used for treatment of water intended for human consumption - ManganeseGreensand


Date: 18/07/2018

I.S. EN 12912:2000223.

Products used for treatment of water intended for human consumption - Barite


I.S. EN 12913:2000224.

Products used for treatment of water intended for human consumption - Powdereddiatomaceous earth


I.S. EN 12914:2000225.

Products used for treatment of water intended for human consumption - Powderedperlite


I.S. EN 12915:2000226.

Products used for treatment of water intended for human consumption - Granularactivated carbon


I.S. EN 12919:2000227.

Workplace atmospheres - Pumps for the sampling of chemical agents with a volumeflow rate of over 5 l/min - Requirements and test methods


I.S. EN 12934:2000228.

Feather and down - Composition labelling of processed feathers and down for use assole filling material


I.S. EN ISO 13406-1:2000229.

Ergonomic requirements for work with visual display based on flat panels - Part 1:Introduction (ISO 13406-1:1999)


I.S. ENV 13419-1:1999230.

Building products - Determination of the emission of volatile organic compounds - Part 1:Emission test chamber method


I.S. ENV 13419-2:1999231.

Building products - Determination of the emission of volatile organic compounds - Part 2:Emission test cell method


I.S. ENV 13419-3:1999232.

Building products - Determination of the emission of volatile organic compounds - Part 3:Procedure for sampling, storage of samples and preparation of test specimens


I.S. ENV 13459-1:1999233.

Road marking materials - Quality control - Part 1: Sampling from storage and testing


I.S. ENV 13459-2:1999234.

Road marking materials - Quality control - Part 2: Guidelines for preparing quality plansfor materials application


I.S. ENV 13459-3:1999235.

Road marking materials - Quality control - Part 3: Performance in use


Date: 18/07/2018

I.S. EN 13527:1999236.

Shutters and blinds - Measurement of operating force - Test methods


I.S. ENV 13550:1999237.

Advanced Manufacturing Technology - Systems Architecture - Enterprise ModelExecution and Integration Services


I.S. EN ISO 13786:2000238.

Thermal performance of building components - Dynamic thermal characteristics -Calculation methods (ISO 13786:1999)


I.S. EN ISO 13789:2000239.

Thermal performance of buildings - Transmission heat loss coefficient - Calculationmethod (ISO 13789:1999)


I.S. EN ISO 13997:2000240.

Protective clothing - Mechanical properties - Determination of resistance to cutting bysharp objects (ISO 13997:1999)


I.S. EN ISO 14126:2000241.

Fibre-reinforced plastic composities - Determination of compressive properties in the in-plane direction (ISO 14126:1999)


I.S. EN ISO 15330:2000242.

Fasteners - Preloading test for the detection of hydrogen embrittlement - Parallelbearing surface method (ISO 15330:1999)


I.S. EN ISO 15480:1999243.

Hexagon washer head drilling screws with tapping screw thread (ISO 15480:1999)


I.S. EN ISO 15481:2000244.

Cross recessed pan head drilling screws with tapping screw thread (ISO 15481:1999)


I.S. EN ISO 15482:2000245.

Cross recessed countersunk head drilling screws with tapping screw thread (ISO15482:1999)


I.S. EN ISO 15483:2000246.

Cross recessed raised countersunk head drilling screws with tapping screw thread (ISO15483:1999)


I.S. EN 46003:2000247.

Quality systems - Medical devices - Particular requirements for the application of ENISO 9003


I.S. EN 228:2000248.

Automotive fuels - Unleaded petrol - Requirements and test methods


Date: 18/07/2018

I.S. EN 590:2000249.

Automotive fuels - Diesel - Requirements and test methods


I.S. EN 89:1999/A1:2000250.

Gas-fired storage water heaters for the production of domestic hot water


I.S. EN ISO 389-5:2000251.

Acoustics - Reference zero for the calibration of audiometric equipment - Part 5:Reference equivalent threshold sound pressure levels for pure tones in the frequencyrange 8 kHz to 16 kHz (ISO/TR 389-5:1998)


I.S. EN 89:2000252.

Gas-fired storage water heaters for the production of domestic hot water


I.S. EN 419-1:2000253.

Non-domestic gas-fired overhead luminous radiant heaters - Part 1: Safety


I.S. EN 437:1993/A2:2000254.

Test gases - Test pressures - Appliance categories


I.S. EN 483:2000255.

Gas-fired central heating boilers - Type C boilers of nominal heat input not exceeding 70kW


I.S. EN 502:2000256.

Roofing products from metal sheet - Specification for fully supported roofing products ofstainless steel sheet


I.S. EN 504:2000257.

Roofing products from metal sheet - Specification for fully supported roofing products ofcopper sheet


I.S. EN 505:2000258.

Roofing products from metal sheet - Specification for fully supported roofing products ofsteel sheet


I.S. EN 507:2000259.

Roofing products from metal sheet - Specification for fully supported roofing products ofaluminium sheet


I.S. EN 609-2:2000260.

Agricultural and forestry machinery - Log splitters - Safety - Part 2: Screw splitters


I.S. EN 656:2000261.

Gas-fired central heating boilers - Type B boilers of nominal heat input exceeding 70 kWbut not exceeding 300 kW


Date: 18/07/2018

I.S. EN 777-3:2000262.

Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part3: System F, safety


I.S. EN 902:2000263.

Chemicals used for treatment of water intended for human consumption - Hydrogenperoxide


I.S. ENV 926-2:1999264.

Paragliding equipment - Paragliders - Part 2: Requirements and flight tests


I.S. EN 932-5:2000265.

Tests for general properties of aggregates - Part 5: Common equipment and calibration


I.S. EN 933-4:2000266.

Tests for geometrical properties of aggregates - Part 4: Determination of particle shape -Shape index


I.S. EN 1047-2:2000267.

Secure storage units - Classification and methods of test for resistance to fire - Part 2:Data rooms and data containers


I.S. EN 1063:2000268.

Glass in building - Security glazing - Testing and classification of resistance againstbullet attack


I.S. EN 1192:2000269.

Doors - Classification of strength requirements


I.S. EN 1213:2000270.

Building valves - Copper alloy stopvalves for potable water supply in buildings - Testsand requirements


I.S. EN 1304:1998/A1:2000271.

Clay roofing tiles for discontinuous laying - Products definitions and specifications


I.S. EN 1363-1:2000272.

Fire resistance tests -Part 1: General requirements


I.S. EN 1363-2:2000273.

Fire resistance tests - Part 2: Alternative and additional procedures


I.S. EN 1364-1:2000274.

Fire resistance tests for non-loadbearing elements -Part 1: Walls


Date: 18/07/2018

I.S. EN 1364-2:2000275.

Fire resistance tests for non-loadbearing elements -Part 2: Ceilings


I.S. EN 1365-1:2000276.

Fire resistance tests for loadbearing elements -Part 1: Walls


I.S. EN 1365-4:2000277.

Fire resistance tests for loadbearing elements -Part 4: Columns


I.S. EN 1366-1:2000278.

Fire resistance tests for service installations - Part 1: Ducts


I.S. EN 1366-2:2000279.

Fire resistance tests for service installations - Part 2: Fire dampers


I.S. EN 1458-1:2000280.

Domestic direct gas-fired tumble dryers of types B22D and B23D, of nominal heat inputnot exceeding 6 kW - Part 1: Safety


I.S. EN ISO 1478:2000281.

Tapping screw thread (ISO 1478:1999)


I.S. EN 1515-1:2000282.

Flanges and their joints - Bolting - Part 1: Selection of bolting


I.S. EN 1529:2000283.

Doors leaves - Height, width, thickness and squareness - Tolerance classes


I.S. EN 1530:2000284.

Door leaves - General and local flatness - Tolerance classes


I.S. EN 1546-1:2000285.

Identification card systems - Inter-sector electronic purse - Part 1: Definitions, conceptsand structures


I.S. EN 1546-4:2000286.

Identification card systems - Inter-sector electronic purse - Part 4: Data objects


I.S. EN 1553:2000287.

Agricultural machinery - Agricultural self-propelled, mounted, semi-mounted and trailedmachines - Common safety requirements


I.S. EN 1567:2000288.

Building valves - Water pressure reducing valves and combination water pressurereducing valves - Requirements and tests


Date: 18/07/2018

I.S. EN 1611-1:2000289.

Sawn timber - Appearance grading of softwoods - Part 1: European spruces, firs, pinesand Douglas firs


I.S. EN 1624:2000290.

Textiles and textile products - Burning behaviour of industrial and technical textiles -Procedure to determine the flame spread of vertically oriented specimens


I.S. EN 1625:2000291.

Textiles and textile products - Burning behaviour of industrial and technical textiles -Procedure to determine the ignitability of vertically oriented specimens


I.S. EN ISO 1628-3:2000292.

Plastics - Determination of viscosity number and limiting viscosity number -Part 3: Polyethylenes and polypropylenes (ISO 1628-3:1991, including TechnicalCorrigendum 1: 1992)


I.S. EN 1778:2000293.

Characteristic values for welded thermoplastics constructions - Determination ofallowable stresses and moduli for design of thermoplastics equipment


I.S. EN 1789:2000294.

Medical vehicles and their equipment - Road ambulances


I.S. EN ISO 1798:2000295.

Flexible cellular polymeric materials - Determination of tensile strength and elongation atbreak (ISO 1798:1997)


I.S. EN 1848-1:2000296.

Flexible sheets for waterproofing - Determination of length, width and straightness - Part1: Bitumen sheets for roof waterproofing


I.S. EN 1849-1:2000297.

Flexible sheets for waterproofing - Determination of thickness and mass per unit area -Part 1: Bitumen sheets for roof waterproofing


I.S. EN 1850-1:2000298.

Flexible sheets for waterproofing - Determination of visible defects - Part 1: Bitumensheets for roof waterproofing


I.S. EN ISO 2440:2000299.

Flexible and rigid cellular polymeric materials - Accelerated ageing tests(ISO 2440:1997)


I.S. EN ISO 2738:2000300.

Sintered metal materials, excluding hardmetals - Permeable sintered metal materials -Determination of density, oil content and open porosity (ISO 2738:1999)


Date: 18/07/2018

I.S. EN ISO 3741:2000301.

Acoustics - Determination of sound power levels of noise sources using sound pressure- Precision methods for reverberation rooms (ISO 3741:1999)


I.S. EN ISO 4611:2000302.

Plastics - Determination of the effects of exposure to damp heat, water spray and saltmist (ISO 4611:1987)


I.S. 17799-1:2000303.

Information security management – Part 1: Code of practice for information securitymanagement

15 AUGUST 2000Date published

I.S. 17799-2:2000304.

Information security management – Part 2: Specification for information securitymanagement systems


I.S. EN ISO 4612:2000305.

Plastics - Preparation of PVC pastes for test purposes - Planetary-mixer method(ISO 4612:1999)


I.S. EN ISO 7208:2000306.

Skimmed milk, whey and buttermilk - Determination of fat content - Gravimetric method(Reference method) (ISO 7208:1999)


I.S. EN 10230-1:2000307.

Steel wire nails - Part 1: Loose nails for general applications


I.S. EN 10246-3:2000308.

Non-destructive testing of steel tubes - Part 3: Automatic eddy current testing ofseamless and welded (except submerged arc-welded) steel tubes for the detection ofimperfections


I.S. EN 10246-4:2000309.

Non-destructive testing of steel tubes - Part 4: Automatic full peripheral magnetictransducer/flux leakage testing of seamless ferromagnetic steel tubes for the detectionof transverse imperfections


I.S. EN 10246-5:2000310.

Non-destructive testing of steel tubes - Part 5: Automatic full peripheral magnetictransducer/flux leakage testing of seamless and welded (except submerged arc welded)ferromagnetic steel tubes for the detection of longitudinal imperfections


I.S. EN 1089-3:1997/A1:2000311.

Transportable gas cylinders - Cylinder identification - Part 3: Colour coding


I.S. EN 10246-6:2000312.

Non-destructive testing of steel tubes - Part 6: Automatic full peripheral ultrasonic testingof seamless steel tubes for the detection of transverse imperfections


Date: 18/07/2018

I.S. EN 10246-8:2000313.

Non-destructive testing of steel tubes - Part 8: Automatic ultrasonic testing of the weldseam of electric welded steel tubes for the detection of longitudinal imperfections


I.S. EN 10246-14:2000314.

Non-destructive testing of steel tubes - Part 14: Automatic ultrasonic testing of seamlessand welded (except submerged arc-welded) steel tubes for the detection of laminarimperfections


I.S. EN 10250-2:2000315.

Open die steel forgings for general engineering purposes - Part 2: Non-alloy quality andspecial steels


I.S. EN 10250-3:2000316.

Open die steel forgings for general engineering purposes - Part 3: Alloy special steels


I.S. EN 10250-4:2000317.

Open die steel forgings for general engineering purposes - Part 4: Stainless steels


I.S. EN 10278:2000318.

Dimensions and tolerances of bright steel products


I.S. EN ISO 10432:2000319.

Petroleum and natural gas industries - Downhole equipment - Subsurface safety valveequipment (ISO 10432:1999)


I.S. EN ISO 11244:2000320.

Dental brazing investments (ISO 11244:1998)


I.S. EN ISO 11539:2000321.

Ophthalmic optics - Contact lenses - Classification of contact lenses and contact lensmaterial (ISO 11539:1999)


I.S. EN 12070:2000322.

Welding consumables - Wire electrodes, wires and rods for arc welding of creep-resisting steels - Classification


I.S. EN 12071:1999323.

Welding consumables - Tubular cored electrodes for gas shielded metal arc welding ofcreep-resisting steels - Classification


I.S. EN 12072:2000324.

Welding consumables - Wire electrodes, wires and rods for arc welding of stainless andheat resisting steels - Classification


I.S. EN 12073:2000325.

Welding consumables - Tubular cored electrodes for metal arc welding with or without agas shield of stainless and heat-resisting steels - Classification


Date: 18/07/2018

I.S. EN 12193:1999326.

Light and lighting - Sports lighting


I.S. EN 12207:2000327.

Windows and doors - Air permeability - Classification


I.S. EN 12208:2000328.

Windows and doors - Watertightness - Classification


I.S. EN 12210:2000329.

Windows and doors - Resistance to wind load - Classification


I.S. EN 12219:2000330.

Doors - Climatic influences - Requirements and classification


I.S. EN 12241:2000331.

Touch and close fasteners - Method for closure prior to washing and drying or drycleaning


I.S. EN 12242:2000332.

Touch and close fasteners - Determination of peel strength


I.S. EN 12243:2000333.

Touch and close fasteners - Determination of dimensional change in washing and dryingand dry cleaning


I.S. ENV 12443:2000334.

Medical Informatics - Healthcare Information Framework (HIF)


I.S. EN 12590:2000335.

Textiles - Industrial sewing threads made wholly or partly from synthetic fibres


I.S. EN 12591:2000336.

Bitumen and bituminous binders - Specifications for paving grade bitumens


I.S. EN 12592:1999337.

Bitumen and bituminous binders - Determination of solubility


I.S. EN 12593:1999338.

Bitumen and bituminous binders - Determination of the Fraass breaking point


I.S. EN ISO 14402:2000339.

Water quality - Determination of phenol index by flow analysis(FIA and CFA) (ISO 14402:1999)


I.S. EN ISO 14419:2000340.

Textiles - Oil repellency - Hydrocarbon resistance test (ISO 14419:1998)


Date: 18/07/2018

I.S. EN ISO 14526-1:2000341.

Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 1: Designationsystem and basis for specifications (ISO 14526-1:1999)


I.S. EN ISO 14526-2:2000342.

Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 2: Preparation of testspecimens and determination of properties (ISO 14526-2:1999)


I.S. EN ISO 14526-3:2000343.

Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 3: Requirements forselected moulding


I.S. EN ISO 14527-1:2000344.

Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder mouldingcompounds (UF- and UF/MF- PMCs) - Part 1: Designation system and basis forspecifications (ISO 14527-1:1999)


I.S. EN ISO 14527-2:2000345.

Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder mouldingcompounds (UF- and UF/MF- PMCs) - Part 2: Preparation of test specimens anddetermination of properties (ISO 14527-2:1999)


I.S. EN 12595:2000346.

Bitumen and bituminous binders - Determination of kinematic viscosity


I.S. EN 12596:2000347.

Bitumen and bituminous binders - Determination of dynamic viscosity by vacuumcapillary


I.S. EN 12653:2000348.

Footwear, leather and imitation leather manufacturing machines - Nailing machines -Safety requirements


I.S. EN 12704:1999349.

Adhesives for paper and board, packaging and disposable sanitary products -Determination of foam formation for aqueous adhesives


I.S. EN 12705:2000350.

Adhesives for leather and footwear materials - Determination of colour change of whiteor bright coloured leather surfaces by migration


I.S. EN 12706:2000351.

Adhesives - Test methods for hydraulic setting floor smoothing and/or levellingcompounds - Determination of flow characteristics


I.S. EN 12728:2000352.

Surface active agents - Determination of foaming power - Perforated disc beatingmethod


Date: 18/07/2018

I.S. EN 12772:1999353.

Footwear - Test methods for outsoles - Dimensional stability


I.S. EN 12773:2000354.

Footwear - Test methods for outsoles - Needle tear strength


I.S. EN 12814-1:2000355.

Testing of welded joints of thermoplastics semi-finished products - Part 1: Bend test


I.S. EN 12832:1999356.

Characterisation of sludges - Utilisation and disposal of sludges - Vocabulary


I.S. EN 12938:2000357.

Methods for the analysis of pewter - Determination of alloying and impurity elementcontents by atomic spectrometry


I.S. EN 12943:2000358.

Filler materials for thermoplastics - Scope, designation, requirements, tests


I.S. EN 12944-1:2000359.

Fertilizers and liming materials and soil improvers - Vocabulary - Part 1: General terms


I.S. EN 12944-2:2000360.

Fertilizers and liming materials and soil improvers - Vocabulary - Part 2: Terms relatingto fertilizers


I.S. EN 13100-1:2000361.

Non destructive testing of welded joints of thermoplastics semi-finished products -Part 1: Visual examination


I.S. ENV 13149-1:2000362.

Public transport - Road vehicle scheduling and control systems - Part 1: WORLDFIPdefinition and application rules for onboard data transmission


I.S. EN ISO 14527-3:2000363.

Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder mouldingcompounds (UF- and UF/MF- PMCs) - Part 3: Requirements for selected mouldingcompounds (ISO 14527-3:1999)


I.S. EN ISO 14528-1:2000364.

Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) -Part 1: Designation system and basis for specifications (ISO 14528-1:1999)


I.S. EN ISO 14528-2:2000365.

Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) -Part 2: Preparation of test specimens and determination of properties (ISO 14528-2:1999)


Date: 18/07/2018

I.S. EN ISO 14528-3:2000366.

Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) -Part 3: Requirements for selected moulding compounds (ISO 14528-3:1999)


I.S. EN ISO 14529-1:2000367.

Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) -Part 1: Designation system and basis for specifications (ISO 14529-1:1999)


I.S. EN ISO 14529-2:2000368.

Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) -Part 2: Preparation of test specimens and determination of properties (ISO 14529-2:1999)


I.S. EN ISO 14529-3:2000369.

Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) -Part 3: Requirements for selected moulding compounds (ISO 14529-3:1999)


I.S. EN ISO 14530-1:2000370.

Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) -Part 1: Designation system and basis for specifications (ISO 14530-1:1999)


I.S. EN ISO 14530-3:1999371.

Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) -Part 3: Requirements for selected moulding compounds (ISO 14530-3:1999)


I.S. EN ISO 15252-1:2000372.

Plastics - Epoxy powder moulding compounds (EP-PMCs) - Part 1: Designation systemand basis for specifications (ISO 15252-1:1999)


I.S. EN ISO 15252-2:2000373.

Plastics - Epoxy powder moulding compounds (EP-PMCs) - Part 2: Preparation of testspecimens and determination of properties (ISO 15252-2:1999)


I.S. EN ISO 15252-3:2000374.

Plastics - Epoxy powder mulding compounds (EP-PMCs) - Part 3: Requirements forselected moulding compounds (ISO 15252-3:1999)


I.S. EN ISO 15318:2000375.

Pulp, paper and board - Determination of 7 specified polychlorinated biphenyls (PCB)(ISO 15318:1999)


I.S. EN 45510-3-1:2000376.

Guide for procurement of power station equipment - Part 3-1: Boilers - Water tubeboilers


I.S. EN 45510-3-2:2000377.

Guide for procurement of power station equipment - Part 3-2: Boilers - Shell boilers


Date: 18/07/2018

I.S. EN 45510-3-3:2000378.

Guide for procurement of power station equipment - Part 3-3: Boilers - Boilers withfluidized bed firing


I.S. EN 45510-4-8:2000379.

Guide for procurement of power station equipment - Part 4-8: Boiler auxiliaries - Dusthandling plant


I.S. EN 45510-4-10:2000380.

Guide for procurement of power station equipment - Part 4-10: Boiler auxiliaries - Fluegas denitrification (De-NOx) plant


I.S. EN 45510-4-9:1999381.

Guide for procurement of power station equipment - Part 4-9: Boiler auxiliaries -Sootblowers


I.S. EN 45510-6-4:2000382.

Guide for procurement of power station equipment -- Part 6-4: Turbine auxiliaries -Pumps


I.S. EN 45510-6-5:2000383.

Guide for procurement of power station equipment - Part 6-5: Turbine auxiliaries - Drycooling systems


I.S. EN 45510-6-6:2000384.

Guide for procurement of power station equipment - Part 6-6: Turbine auxiliaries - Wetand wet/dry cooling towers


I.S. EN 45510-6-8:2000385.

Guide for procurement of power station equipment - Part 6-8: Turbine auxiliaries -Cranes


I.S. EN 45510-6-9:2000386.

Guide for procurement of power station equipment - Part 6-9: Turbine auxiliaries -Cooling water systems


I.S. EN 45510-7-1:2000387.

Guide for procurement of power station plant, equipment, and systems - Part 7-1: Pipework and valves - High pressure Piping systems


I.S. EN 45510-7-2:2000388.

Guide for procurement of power station plant, equipment, and systems - Part 7-2: Pipework and valves - Boiler and high pressure piping valves


I.S. EN ISO 14530-2:2000389.

Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) -Part 2: Preparation of test specimens and determination of properties (ISO 14530-2:1999)


Date: 18/07/2018

I.S. EN ISO 140-12:2000390.

Acoustics - Measurement of sound insulation in buildings and of building elements -Part 12: Laboratory measurement of room-to-room airborne and impact sound insulationof an access floor (ISO 140-12:2000)


I.S. EN 209:2000391.

Steel drums - Removable head (open head) drums with a minimum total capacity of210 L


I.S. EN 210:2000392.

Steel drums - Non-removable head (tight head) drums with a minimum total capacityof 216,5 L


I.S. EN 250:2000393.

Respiratory equipment - Open-circuit self-contained compressed air diving apparatus -Requirements, testing, marking


I.S. EN 303-6:2000394.

Heating boilers - Part 6: Heating boilers with forced draught burners - Specificrequirements for the domestic hot water operation of combination boilers with atomizingoil burners of nominal heat input not exceeding 70kW


I.S. EN 356:2000395.

Glass in building - Security glazing - Testing and classification of resistance againstmanual attack


I.S. EN 358:2000396.

Personal protective equipment for work positioning and prevention of falls from a height- Belts for work positioning and restraint and work positioning lanyards


I.S. EN 415-2:2000397.

Packaging machines safety - Part 2: Pre-formed rigid container packaging machines


I.S. EN 415-3:2000398.

Safety of packaging machines - Part 3: Form, fill and seal machines


I.S. EN 455-3:1999399.

Medical gloves for single use - Part 3: Requirements and testing for biological evaluation


I.S. EN ISO 505:1999400.

Conveyor belts - Method for the determination of the tear propagation resistance oftextile conveyor belts (ISO 505:1999)


I.S. EN 509:2000401.

Decorative fuel-effect gas appliances


I.S. EN 514:2000402.

Unplasticized polyvinylchoride (PVC-U) profiles for the fabrication of windows and doors- Determination of the strength of welded corners and T-joints


Date: 18/07/2018

I.S. EN 527-1:2000403.

Office Furniture - Work Tables and Desks Part 1: Dimensions


I.S. EN ISO 583-1:2000404.

Conveyor belts with a textile carcass - Total thickness and thickness of elements -Part 1: Methods of test(ISO 583-1:1999)


I.S. EN 737-2:1998/A1:2000405.

Medical gas pipeline systems - Part 2: Anaesthetic gas scavenging disposal systems -Basic requirements


I.S. EN 737-3:1998/A1:2000406.

Medical gas pipeline systems - Part 3: Pipelines for compressed medical gases andvacuum


I.S. EN 741:2000407.

Continuous handling equipment and systems - Safety requirements for systems andtheir components for pneumatic handling of bulk materials


I.S. EN 746-4:2000408.

Industrial thermoprocessing equipment - Part 4: Particular safety requirements for hotdip galvanising thermoprocessing equipment


I.S. EN 866-4:2000409.

Biological systems for testing sterilizers and sterilization processes - Part 4: Particularsystems for use in irradiation sterilizers


I.S. EN 866-5:2000410.

Biological systems for testing sterilizers and sterilization processes - Part 5: Particularsystems for use in low temperature steam and formaldehyde sterilizers


I.S. EN 866-6:2000411.

Biological systems for testing sterilizers and sterilization processes - Part 6: Particularsystems for use in dry heat sterilizers


I.S. EN 866-7:2000412.

Biological systems for testing sterilizers and sterilization processes - Part 7: Particularrequirements for self-contained biological indicator systems for use in moist heatsterilizers


I.S. EN 866-8:2000413.

Biological systems for testing sterilizers and sterilization processes - Part 8: Particularrequirements for self-contained biological indicator systems for use in ethylene oxidesterilizers


I.S. EN 934-4:2000414.

Admixtures for concrete, mortar and grout - Part 4: Admixtures for grout for prestressingtendons - Definitions, requirements and conformity


Date: 18/07/2018

I.S. EN 1013-4:2000415.

Light transmitting profiled plastic sheeting for single skin roofing - Part 4: Specificrequirements, test methods and performance of polycarbonate (PC) sheets


I.S. EN 1013-5:2000416.

Light transmitting profiled plastic sheeting for single skin-roofing - Part 5: Specificrequirements, test methods and performance of polymethylmethacrylate (PMMA) sheets


I.S. EN 1034-3:2000417.

Safety of machinery - Safety requirements for the design and construction of papermaking and finishing machines - Part 3: Winders and slitters, plying machines


I.S. EN 1069-2:2000418.

Water slides of 2 m height and more - Part 2: Instructions


I.S. EN 1097-8:2000419.

Tests for mechanical and physical properties of aggregates - Part 8: Determination ofthe polished stone value


I.S. EN 1330-4:2000420.

Non destructive testing - Terminology - Part 4: Terms used in ultrasonic testing


I.S. EN 1341:2000421.

Slabs of natural stone for eternal paving - Requirements and test methods


I.S. EN 1342:2000422.

Setts of natural stone for external paving - Requirements and test methods


I.S. EN 1365-2:2000423.

Fire resistance tests for loadbearing elements -Part 2: Floors and roofs


I.S. EN 1365-3:2000424.

Fire resistance tests for loadbearing elements -Part 3: Beams


I.S. EN 1367-1:2000425.

Tests for thermal and weathering properties of aggregates - Part 1: Determination ofresistance to freezing and thawing


I.S. EN ISO 1401:2000426.

Rubber hoses for agricultural spraying (ISO 1401:1999)


I.S. EN 1453-1:2000427.

Plastics piping systems with structured-wall pipes for soil and waste discharge (low andhigh temperature) inside buildings -Unplasticized poly(vinyl chloride) (PVC-U) - Part 1:Specifications for pipes and the system


Date: 18/07/2018

I.S. EN 1463-2:2000428.

Road marking materials - Retroreflecting road studs - Part 2: Road test performancespecifications


I.S. EN 1517:2000429.

Surfaces for sports areas - Determination of resistance to impact


I.S. EN 1537:2000430.

Execution of special geotechnical work - Ground anchors


I.S. EN 1644-2:2000431.

Test methods for nonwoven compresses for medical use - Part 2: Finished compresses


I.S. EN ISO 1737:2000432.

Evaporated milk and sweetened condensed milk - Determination of fat content -Gravimetric method (Reference method) (ISO 1737:1999)


I.S. EN 1834-1:2000433.

Reciprocating internal combustion engines - Safety requirements for design andconstruction of engines for use in potentially explosive atmospheres - Part 1: Group llengines for use in flammable gas and vapour atmospheres


I.S. EN 1834-2:2000434.

Reciprocating internal combustion engines - Safety requirements for design andconstruction of engines for use in potentially explosive atmospheres - Part 2: Group 1engines for use in underground workings susceptible to firedamp and/or combustibledust


I.S. EN 1835:2000435.

Respiratory protective devices - Light duty construction compressed air line breathingapparatus incorporating a helmet or a hood - Requirements, testing, marking


I.S. 228:1997/A2:2000436.

Monitoring centres for intruder alarm systems

16 MAY 2000Date published

I.S. EN 12580:2000437.

Soil improvers and growing media – Determination of a quantity


I.S. EN 1863-1:2000438.

Glass in building - Heat strengthened soda lime silicate glass - Part 1 : Definition anddescription


I.S. EN 1871:2000439.

Road marking materials - Physical properties


I.S. EN 1910:2000440.

Wood and parquet flooring and wood panelling and cladding - Determination ofdimensional stability


Date: 18/07/2018

I.S. EN 1969:2000441.

Surfaces for sports areas - determination of thickness of synthetic sports surfaces


I.S. EN 1984:2000442.

Industrial valves - Steel gate valves


I.S. EN 2138:2000443.

Aerospace series - Washers, flat, in steel, cadmium plated


I.S. EN ISO 2740:2000444.

Sintered metal materials, excluding hardmetals - Tensile test pieces


I.S. EN 2913:2000445.

Aerospace series - Washers, flat, large diameter, in steel, cadmium plated


I.S. EN ISO 3673-2:2000446.

Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination ofproperties (ISO 3673-2:1999)


I.S. EN ISO 4753:2000447.

Fasteners - Ends of parts with external ISO metric screw thread (ISO 4753:1999)


I.S. EN ISO 4957:2000448.

Tool steels (ISO 4957:1999)


I.S. EN ISO 7027:2000449.

Water quality - Determination of turbidity


I.S. EN ISO 7328:2000450.

Milk-based edible ices and ice mixes - Determination of fat content - Gravimetric method(Reference method) (ISO 7328:1999)


I.S. EN ISO 9241-6:2000451.

Ergonomic requirements for office work with visual display terminals (VDTs) -Part 6: Guidance on the work environment (ISO 9241-6:1999)


I.S. EN ISO 9906:2000452.

Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1 and 2(ISO 9906:1999)


I.S. EN ISO 9997:2000453.

Dental cartridge syringes (ISO 9997:1999)


I.S. EN ISO 10082:2000454.

Plastics - Phenolic resins - Classification and test methods (ISO 10082:1999)


I.S. EN 10222-2:1999455.

Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels withspecified elevated temperature properties


Date: 18/07/2018

I.S. EN 10222-5:2000456.

Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels


I.S. EN 10279:2000457.

Hot rolled steel channels - Tolerances on shape, dimensions and mass


I.S. EN ISO 10456:2000458.

Building materials and products - Procedures for determining declared and designthermal values (ISO 10456:1999)


I.S. EN ISO 11064-3:1999459.

Ergonomic design of control centres - Part 3: Control room layout (ISO 11064-3:1999)


I.S. EN ISO 11143:2000460.

Dental equipment - Amalgam separators (ISO 11143:1999)


I.S. EN ISO 11979-1:2000461.

Ophthalmic implants - Intraocular lenses - Part 1: Vocabulary (ISO 11979-1:1999)


I.S. EN ISO 11979-2:2000462.

Ophthalmic implants - intraocular lenses - Part 2: Optical properties and test methods(ISO 11979-2:1999)


I.S. EN 12007-4:2000463.

Gas supply systems - Pipelines for maximum operating pressure up to and including16 bar - Part 4: Specific functional recommendations for renovation.


I.S. EN ISO 11984:2000464.

Ophthalmic optics - Contact lenses - Determination of rigid lens flexure and breakage(ISO 11984:1999)


I.S. EN 12154:2000465.

Curtain walling - Watertightness - Performance requirements and classification


I.S. EN 12223:2000466.

Non-destructive testing - Ultrasonic examination - Specification for calibration blockNo. 1


I.S. EN 12229:2000467.

Surface for sports areas - Procedure for the preparation of synthetic turf and textile testpieces


I.S. EN 12309-2:2000468.

Gas-fired absorption and adsorption air-conditioning and/or heat pump appliances with anet heat input not exceeding 70 kW - Part 2: Rational use of energy


Date: 18/07/2018

I.S. EN 12353:2000469.

Chemical disinfectants and antiseptics - Preservation of microbial strains used for thedetermination of bactericidal and fungicidal activity


I.S. EN 12368:2000470.

Traffic control equipment - Signal heads


I.S. EN 12525:2000471.

Agricultural machinery - Front loaders - Safety


I.S. EN 12566-1:2000472.

Small wastewater treatment systems for up to 50 PT - Part 1; Prefabricated septic tanks


I.S. EN 12579:2000473.

Soil improvers and growing media - Sampling


I.S. EN 12594:2000474.

Bitumen and bituminous binders - Preparation of test samples


I.S. EN 12641-1:2000475.

Swap bodies - Tarpaulines - Part 1 - Minimum requirements


I.S. EN 12702:2000476.

Adhesives for paper and board, packaging and disposable sanitary products -Determination of blocking behaviour of potentially adhesive layers


I.S. EN 12707:2000477.

Plastics drums - Non-removable head (tight head) drums with a nominal capacity of 210L, 220 L and 225 L


I.S. EN 12708:2000478.

Plug/bung closure systems for plastics containers with a nominal capacity of 20 L to 225L


I.S. EN 12709:2000479.

Plastics drums - Non-removable head (tight head) circular cross-section drums with anominal capacity of 20 L to 120 L


I.S. EN 12710:2000480.

Fibreboard drums - Removable head (open head) drums with closing rings with anominal capacity of 15 L to 250 L


I.S. EN 12712:2000481.

Plastics jerricans - Jerricans with a nominal capacity of 20 L to 60 L for optimal utilizationof pallet sizes 800 mm x 1200 mm, 1000 mm x 1200 mm and 1140 mm x 1140 mm


I.S. EN 12711:2000482.

Steel drums - Non-removable head (tight head) drums with a minimum total capacityof 230 L


Date: 18/07/2018

I.S. EN 12713:2000483.

Screw cap closure systems for plastics containers with a nominal capacity of 20 L to 60L


I.S. EN 12714:2000484.

Plastics drums - Removable head (open head) drums with a nominal capacity of 25 L to220 L


I.S. EN 12755:2000485.

Transportable gas cylinders - Filling conditions for acetylene bundles


I.S. EN 12770:2000486.

Footwear - Test methods for outsoles - Abrasion resistance


I.S. EN 12771:2000487.

Footwear - Test methods for outsoles - Tear strength


I.S. EN 12774:2000488.

Footwear - Test methods for outsoles – Determination of split tear strength anddelamination resistance


I.S. EN 12782:2000489.

Footwear - Test methods for insoles - Resistance to stitch tear


I.S. EN 12784:2000490.

Footwear - Test methods for whole shoe - Thermal insulation


I.S. EN 12802:2000491.

Road marking materials - Laboratory methods for identification


I.S. EN 12814-2:2000492.

Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test


I.S. EN 12814-3:2000493.

Testing of welded joints of thermoplastics semi-finished products - Part 3: Tensilecreep test


I.S. EN 12814-6:2000494.

Testing of welded joints of thermoplastics semi-finished products - Part 6: Lowtemperature tensile test


I.S. EN 12889:2000495.

Trenchless construction and testing of drains and sewers


I.S. EN 12946:2000496.

Liming materials – Determination of calcium content and magnesium content -Complexometric method


Date: 18/07/2018

I.S. EN 12974:2000497.

Surface active agents – Determination of the 1,4-dioxane content in alkyl-ethoxy-sulfateproducts by GLC/head surface procedure


I.S. EN 13007:2000498.

Steel drums - Non-removable head (tight head) drums with a nominal capacity of 20 L to60 L


I.S. EN 13008:2000499.

Steel drums – Removable head (open head) drums with a nominal capacity of 15 L to62 L


I.S. EN 13009:2000500.

Hygrothermal performance of building materials and products – Determination of hygricexpansion coefficient


I.S. EN 13014:2000501.

Connections for gas sampling tubes to anaesthetic and respiratory equipment


I.S. EN 13037:2000502.

Soil improvers and growing media – determination of pH


I.S. EN 13038:2000503.

Soil improvers and growing media – Determination of electrical conductivity


I.S. EN 13039:2000504.

Soil improvers and growing media – Determination of organic matter content and ash


I.S. EN 13040:2000505.

Soil improvers and growing media – Sample preparation for chemical and physical tests,determination of dry matter content, moisture content and laboratory compacted bulkdensity


I.S. EN 13041:2000506.

Soil improvers and growing media – Determination of physical properties – Dry bulkdensity, air volume, water volume, shrinkage value and total pore space


I.S. EN 13068-1:2000507.

Non-destructive testing - Radioscopic testing - Part 1: quantitative measurement ofimaging properties


I.S. EN 13068-2:2000508.

Non-destructive testing – Radioscopic testing - Part 2: Check of long term stability ofimaging devices


I.S. EN 13091:2000509.

Biotechnology – Performance criteria for filter elements and filtration assemblies


Date: 18/07/2018

I.S. EN 13092:2000510.

Biotechnology – Equipment - Guidance on sampling and inoculation procedures


I.S. EN 13095:2000511.

Biotechnology – Performance criteria for off-gas systems


I.S. EN 13510:2000512.

Earth-moving machinery – Roll-over protective structures - Laboratory tests andperformance requirements (ISO 3471:1994, including amendment 1:1997 modified)


I.S. EN ISO 14182:2000513.

Animal feeding stuffs – Determination of residues of organophosphorus pesticides - Gaschromatographic method (ISO 14182:1999).


I.S. EN ISO 15029-1:2000514.

Petroleum and related products - Determination of spray ignition characteristics of fire-resistant fluids – Part 1 : Spray flame persistence - Hollow-cone nozzle method (ISO15029-1:1999)


I.S. EN ISO 15606:2000515.

Dental handpieces - Air-powered scalers and scaler tips (ISO 15606:1999)


I.S. EN 45544-1:2000516.

Workplace atmospheres - Electrical apparatus used for the direct detection and directconcentration measurement of toxic gases and vapours - Part 1: General requirementsand test methods


I.S. EN 45544-2:2000517.

Workplace atmospheres - Electrical apparatus used for the direct detection and directconcentration measurement of toxic gases and vapours - Part 2: Performancerequirements for apparatus used for measuring concentrations in the region of limitvalues


I.S. EN 45544-3:2000518.

Workplace atmospheres - Electrical apparatus used for the direct detection and directconcentration measurement of toxic gases and vapours - Part 3: Performancerequirements for apparatus used for measuring concentrations well above limit values


I.S. EN 45544-4:2000519.

Workplace atmospheres - Electrical apparatus used for the direct detection and directconcentration measurement of toxic gases and vapours - Part 4: Guide for selection,installation, use and maintenance


I.S. EN ISO 81714-1:2000520.

Design of graphical symbols for use in the technical documentation of products - Part 1 :Basic rules (ISO 81714-1:1999)


I.S. EN 50049-1:1998/A1:2000521.

Domestic and similar electronic equipment interconnection requirements: Peritelevisionconnector


Date: 18/07/2018

I.S. EN 50157-2-1:2000522.

Domestic and similar electronic equipment interconnection requirements: AV.link -- Part2-1: Signal quality matching and automatic selection of source devices


I.S. EN 50157-2-2:2000523.

Domestic and similar electronic equipment interconnection requirements: AV.link -- Part2-2: Basic system oriented commands


I.S. EN 50157-2-3:2000524.

Domestic and similar electronic equipment interconnection requirements: AV.link -- Part2-3: System oriented application


I.S. EN 60065:2000525.

Audio, video and similar electronic apparatus - Safety requirements (IEC 60065:1998(MOD))


I.S. EN 60118-1:1995/A1:2000526.

Hearing aids -- Part 1: Hearing aids with induction pick-up coil input (IEC 60118-1:1995/A1:1998 (EQV))


I.S. EN 60598-1:1997/A13:2000527.

Luminaires -- Part 1: General requirements and tests


I.S. EN 61000-4-3:1996/A1:1998528.

Electromagnetic compatibility (EMC) -- Part 4-3: Testing and measurement techniques -Radiated, radio-frequency, electromagnetic field immunity test (IEC 61000-4-3:1995/A1:1998 (EQV))


I.S. EN 140402:2000529.

Blank Detail Specification: Fixed low power wire wound surface mounting (SMD)resistors


HD 630-2-1 (S3):2000530.

Low-voltage fuses -- Part 2-1: Supplementary requirements for fuses for use byauthorized persons (fuses mainly for industrial application) -- Sections I to V: Examplesof types of standardized fuses for use by authorized persons (IEC 60269-2-1:1996(MOD))


I.S. EN 60118-6:2000531.

Hearing aids -- Part 6: Characteristics of electrical input circuits for hearing aids (IEC60118-6:1999 (EQV))


I.S. EN 60317-52:2000532.

Specifications for particular types of winding wires -- Part 52: Aromatic polyamide(aramid) tape wrapped round copper wire, temperature index 220 (IEC 60317-52:1999(EQV))


Date: 18/07/2018

I.S. EN 60317-53:2000533.

Specifications for particular types of winding wires -- Part 53: Aromatic polyamide(aramid) tape wrapped rectangular copper wire, temperature index 220 (IEC 60317-53:1999 (EQV))


I.S. EN 60335-2-76:2000534.

Safety of household and similar electrical appliances -- Part 2-76: Particularrequirements for electric fence energizers (IEC 60335-2-76:1997 (MOD))


I.S. EN 60424-1:2000535.

Ferrite cores - Guide on the limits of surface irregularities -- Part 1: General specification(IEC 60424-1:1999 (EQV))


I.S. EN 60424-3:2000536.

Ferrite cores - Guide on the limits of surface irregularities -- Part 3: ETD-cores and E-cores (IEC 60424-3:1999 (EQV))


I.S. EN 60601-2-39:2000537.

Medical electrical equipment -- Part 2-39: Particular requirements for the safety ofperitoneal dialysis equipment (IEC 60601-2-39:1999 (EQV))


I.S. EN 60684-3-409:2000538.

Flexible insulating sleeving -- Part 3: Specifications for individual types of sleeving --Sheet 409: Glass textile sleeving with polyurethane (PUR)-based coating (IEC 60684-3-409:1999 (EQV))


I.S. EN 61300-3-2:2000539.

Fibre optic interconnecting devices and passive components - Basic tests andmeasurement procedures -- Part 3-2: Examinations and measurements - Polarizationdependence of attenuation in a single-mode fibre optic device (IEC 61300-3-2:1999(EQV))


I.S. EN 61943:2000540.

Integrated circuits - Manufacturing line approval application guideline (IEC 61943:1999(EQV))


I.S. EN 60317-23:1995/A2:2000541.

Specifications for particular types of winding wires -- Part 23: Solderable polyesterimideenamelled round copper wire, class 180 (IEC 60317-23:1990/A2:1999 (EQV))


I.S. EN 60445:2000542.

Basic and safety principles for man-machine interface, marking and identification -Identification of equipment terminals and of terminations of certain designatedconductors, including general rules for an alphanumeric system (IEC 60445:1999(EQV))


I.S. EN 60672-2:2000543.

Ceramic and glass insulating materials -- Part 2: Methods of test (IEC 60672-2:1999(EQV))


Date: 18/07/2018

I.S. EN 60695-1-1:2000544.

Fire hazard testing -- Part 1-1: Guidance for assessing the fire hazard of electrotechnicalproducts - General guidelines (IEC 60695-1-1:1999 (EQV) + corrigendum Jan. 2000(EQV))


I.S. EN 60936-1:2000545.

Maritime navigation and radiocommunication equipment and systems - Radar -- Part 1:Shipborne radar - Performance requirements - Methods of testing and required testresults (IEC 60936-1:1999 (EQV))


I.S. EN 60958-1:2000546.

Digital audio interface -- Part 1: General (IEC 60958-1:1999 (EQV))


I.S. EN 60958-3:2000547.

Digital audio interface -- Part 3: Consumer applications (IEC 60958-3:1999 (EQV))


I.S. EN 60958-4:2000548.

Digital audio interface -- Part 4: Professional applications (IEC 60958-4:1999 (EQV))


I.S. EN 60034-1:1998/A2:2000549.

Rotating electrical machines -- Part 1: Rating and performance (IEC 60034-1:1996/A2:1999 (EQV))


I.S. EN 60086-2:1997/A1:2000550.

Primary batteries -- Part 2: Specification sheets (IEC 60086-2:1997/A1:1999 (EQV))


I.S. EN 60335-2-5:1995/A1:2000551.

Safety of household and similar electrical appliances -- Part 2-5: Particular requirementsfor dishwashers (IEC 60335-2-5:1992/A1:1999 (EQV))


I.S. EN 60335-2-15:1996/A1:2000552.

Safety of household and similar electrical appliances -- Part 2-15: Particularrequirements for appliances for heating liquids (IEC 60335-2-15:1995/A1:1999 (EQV))


I.S. EN 60439-4:1991/A2:2000553.

Low-voltage switchgear and controlgear assemblies -- Part 4: Particular requirementsfor assemblies for construction sites (ACS) (IEC 60439-4:1990/A2:1999 (EQV))


I.S. EN 60626-3:1997/A1:2000554.

Combined flexible materials for electrical insulation -- Part 3: Specifications for individualmaterials (IEC 60626-3:1996/A1:1999 (EQV))


I.S. EN 60928:1995/A1:2000555.

Auxiliaries for lamps - A.C. supplied electronic ballasts for tubular fluorescent lamps -General and safety requirements (IEC 60928:1995/A1:1999 (EQV))


Date: 18/07/2018

I.S. EN 60947-5-1:1997/A1:2000556.

Low-voltage switchgear and controlgear -- Part 5-1: Control circuit devices and switchingelements - Electromechanical control circuit devices (IEC 60947-5-1:1997/A1:1999(EQV))


I.S. EN 60947-5-2:1998/A1:2000557.

Low-voltage switchgear and controlgear -- Part 5-2: Control circuit devices and switchingelements - Proximity switches (IEC 60947-5-2:1997/A1:1999 (EQV))


I.S. EN 60947-7-1:1991/A1:2000558.

Low-voltage switchgear and controlgear -- Part 7-1: Ancillary equipment - Terminalblocks for copper conductors (IEC 60947-7-1:1989/A1:1999 (EQV))


I.S. EN 60044-1:2000559.

Instrument transformers -- Part 1: Current transformers (IEC 60044-1:1996 (MOD))


I.S. EN 60335-2-24:2000560.

Safety of household and similar electrical appliances -- Part 2-24: Particularrequirements for refrigerating appliances, ice-cream appliances and ice-makers (IEC60335-2-24:1997 (EQV) + A1:1998 (EQV))


I.S. EN 61000-4-17:2000561.

Electromagnetic compatibility (EMC) -- Part 4-17: Testing and measurement techniques- Ripple on d.c. input power port immunity test (IEC 61000-4-17:1999 (EQV))


I.S. EN 61069-7:2000562.

Industrial-process measurement and control - Evaluation of system properties for thepurpose of system assessment -- Part 7: Assessment of system safety (IEC 61069-7:1999 (EQV))


I.S. EN 61069-8:2000563.

Industrial-process measurement and control - Evaluation of system properties for thepurpose of system assessment -- Part 8: Assessment of non-task-related systemproperties (IEC 61069-8:1999 (EQV))


I.S. EN 61587-1:2000564.

Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 --Part 1: Climatic, mechanical tests and safety aspects for cabinets, racks, subracks andchassis (IEC 61587-1:1999 (EQV))


I.S. EN 61747-1:2000565.

Liquid crystal and solid-state display devices -- Part 1: Generic specification (IEC 61747-1:1998 (EQV))


I.S. EN 61747-3:2000566.

Liquid crystal and solid state display devices -- Part 3: Sectional specification for liquidcrystal display (LCD) cells (IEC 61747-3:1998 (EQV))


Date: 18/07/2018

I.S. EN 61747-3-1:2000567.

Liquid crystal and solid-state display devices -- Part 3-1: Liquid crystal display (LCD)cells - Blank detail specification (IEC 61747-3-1:1998 (EQV))


I.S. EN 61754-4:1997/A1:2000568.

Fibre optic connector interfaces -- Part 4: Type SC connector family (IEC 61754-4:1997/A1:1999 (EQV))


I.S. EN 61754-13:2000569.

Fibre optic connector interfaces -- Part 13: Type FC-PC connector family (IEC 61754-13:1999 (EQV))


I.S. EN 60317-0-2:1998/A1:2000570.

Specifications for particular types of winding wires -- Part 0-2: General requirements -Enamelled rectangular copper wire (IEC 60317-0-2:1997/A1:1999 (EQV))


I.S. EN 60317-0-3:1998/A1:2000571.

Specifications for particular types of winding wires -- Part 0-3: General requirements -Enamelled round aluminium wire (IEC 60317-0-3:1997/A1:1999 (EQV))


I.S. EN 60317-0-4:1998/A1:2000572.

Specifications for particular types of winding wires -- Part 0-4: General requirements -Glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copperwire (IEC 60317-0-4:1997/A1:1999 (EQV))


I.S. EN 60317-0-5:1994/A2:2000573.

Specifications for particular types of winding wires -- Part 0-5: General requirements -Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copperwire (IEC 60317-0-5:1992/A2:1999 (EQV))


I.S. EN 60317-2:1994/A2:2000574.

Specifications for particular types of winding wires -- Part 2: Solderable polyurethaneenamelled round copper wire, class 130, with a bonding layer (IEC 60317-2:1990/A2:1999 (EQV))


I.S. EN 60317-4:1994/A2:2000575.

Specifications for particular types of winding wires -- Part 4: Solderable polyurethaneenamelled round copper wire, class 130 (IEC 60317-4:1990/A2:1999 (EQV))


I.S. EN 60317-19:1995/A2:2000576.

Specifications for particular types of winding wires -- Part 19: Solderable polyurethaneenamelled round copper wire overcoated with polyamide, class 130 (IEC 60317-19:1990/A2:1999 (EQV))


I.S. EN 60317-20:1995/A2:2000577.

Specifications for particular types of winding wires -- Part 20: Solderable polyurethaneenamelled round copper wire, class 155 (IEC 60317-20:1990/A2:1999 (EQV))


Date: 18/07/2018

I.S. EN 60317-21:1995/A2:2000578.

Specifications for particular types of winding wires -- Part 21: Solderable polyurethaneenamelled round copper wire overcoated with polyamide, class 155 (IEC 60317-21:1990/A2:1999 (EQV))


I.S. EN 60335-2-3:1995/A2:2000579.

Safety of household and similar electrical appliances -- Part 2-3: Particular requirementsfor electric irons (IEC 60335-2-3:1993/A2:1999 (EQV))


I.S. EN 60068-2-38:2000580.

Environmental testing -- Part 2: Tests - Test Z/AD: Composite temperature/humiditycyclic test (IEC 60068-2-38:1974 (EQV))


I.S. EN 60630:1998581.

Maximum lamp outlines for incandescent lamps (IEC 60630:1994 (MOD) + A1:1997(MOD) + A2:1998 (MOD))


I.S. EN 60684-3-217:2000582.

Flexible insulating sleeving -- Part 3: Specifications for individual types of sleeving --Sheet 217: Heat-shrinkable polyolefin sleeving, flame retarded shrink ratio 3:1 (IEC60684-3-217:1998 (EQV))


I.S. EN 60904-6:1994/A1:2000583.

Photovoltaic devices -- Part 6: Requirements for reference solar modules (IEC 60904-6:1994/A1:1998 (EQV))


I.S. EN 60947-5-2:2000584.

Low-voltage switchgear and controlgear -- Part 5-2: Control circuit devices and switchingelements - Proximity switches (IEC 60947-5-2:1997 (MOD))


I.S. EN 60974-1:2000585.

Arc welding equipment -- Part 1: Welding power sources (IEC 60974-1:1998 (EQV))


I.S. EN 61512-1:2000586.

Batch control -- Part 1: Models and terminology (IEC 61512-1:1997 (EQV))


I.S. EN 61558-1:1997/A1:2000587.

Safety of power transformers, power supply units and similar -- Part 1: Generalrequirements and tests (IEC 61558-1:1997/A1:1998 (EQV))


I.S. EN 61701:2000588.

Salt mist corrosion testing of photovoltaic (PV) modules (IEC 61701:1995 (EQV))


I.S. EN 61721:2000589.

Susceptibility of a photovoltaic (PV) module to accidental impact damage (resistance toimpact test) (IEC 61721:1995 (EQV))


I.S. EN 35:2000590.

Pedestal bidets with over-rim supply - Connecting dimensions


Date: 18/07/2018

I.S. EN 40-3-2:2000591.

Lighting columns - Part 3-2: Design and verification - Verification by testing


I.S. EN 141:2000592.

Respiratory protective devices - Gas filters and combined filters - Requirements, testing,marking


I.S. EN 143:2000593.

Respiratory protective devices - Particle filters - Requirements, testing, marking


I.S. EN 270:1994/A1:2000594.

Respiratory protective devices - Compressed air line breathing apparatus incorporatinga hood - Requirements, testing, marking


I.S. EN 271:1995/A1:2000595.

Respiratory protective devices - Compressed air line or powered fresh air hosebreathing apparatus incorporating a hood for use in abrasive blasting operations -Requirements, testing, marking


I.S. EN 378-2:2000596.

Refrigerating systems and heat pumps - Safety and environmental requirements - Part2: Design, construction, testing, marking and documentation


I.S. EN 378-3:2000597.

Refrigerating systems and heat pumps - Safety and environmental requirements -Part 3: Installation site and personal protection


I.S. EN 378-4:2000598.

Refrigerating systems and heat pumps - Safety and environmental requirements -Part 4: Operation, maintenance, repair and recovery


I.S. EN ISO 389-1:2000599.

Acoustics - Reference zero for the calibration of audiometric equipment -Part 1: Reference equivalent threshold sound pressure levels for pure tones and supra-aural earphones (ISO 389-1:1998)


I.S. EN 671-3:2000600.

Fixed firefighting systems - Hose systems - Part 3: Maintenance of hose reels with semi-rigid hose and hose systems with lay-flat hose


I.S. EN ISO 703-1:2000601.

Conveyor belts - Transverse flexibility and troughability - Part 1: Test method (ISO 703-1:1999)


I.S. EN ISO 748:2000602.

Measurement of liquid flow in open channels - Velocity-area methods (ISO 748:1997)


I.S. EN ISO 772:2000603.

Hydrometric determinations - Vocabulary and symbols (ISO 772:1996)


Date: 18/07/2018

I.S. EN 805:2000604.

Water supply - Requirements for systems and components outside buildings


I.S. EN 846-2:2000605.

Methods of test for ancillary components for masonry - Part 2: Determination of bondstrength of prefabricated bed joint reinforcement in mortar joints


I.S. EN 846-6:2000606.

Methods of test for ancillary components for masonry - Part 6: Determination of tensileand compressive load capacity and load displacement characteristics of wall ties (singleend test)


I.S. EN 846-8:2000607.

Methods of test for ancillary components for masonry - Part 8: Determination of loadcapacity and load-deflection characteristics of joist hangers


I.S. EN 846-9:2000608.

Methods of test for ancillary components for masonry - Part 9: Determination of flexuralresistance and shear resistance of lintels


I.S. EN 846-10:2000609.

Methods of test for ancillary components for masonry - Part 10: Determination of loadcapacity and load deflection characteristics of brackets


I.S. EN 846-11:2000610.

Methods of test for ancillary components for masonry - Part 11: Determination ofdimensions and bow of lintels


I.S. EN 934-6:2000611.

Admixtures for concrete, mortar and grout - Part 6: Sampling, conformity control,evaluation of conformity, marking and labelling


I.S. EN 1015-12:2000612.

Methods of test for mortar for masonry - Part 12: Determination of adhesive strength ofhardened rendering and plastering mortars on substrates


I.S. EN 1251-1:2000613.

Cryogenic vessels - Transportable vacuum insulated vessels of not more than1000 litres volume - Part 1: Fundamental requirements


I.S. EN 1251-2:2000614.

Cryogenic vessels - Transportable vacuum insulated vessels of not more than1000 litres volume - Part 2: Design, fabrication, inspection and testing


I.S. EN 1251-3:2000615.

Cryogenic vessels - Transportable vacuum insulated vessels of not more than1000 litres volume - Part 3: Operational requirements


Date: 18/07/2018

I.S. EN 1294:2000616.

Door leaves - Determination of the behaviour under humidity variations in successiveuniform climates


I.S. EN 1330-9:2000617.

Non-destructive testing - Terminology - Part 9: Terms used in acoustic emission testing


I.S. EN 1335-2:2000618.

Office furniture - Office work chair - Part 2: Safety requirements

2 JUNE 2000Date published

I.S. EN 1335-3:2000619.

Office furniture - Office work chair - Part 3: Safety test methods


I.S. EN 1343:2000620.

Kerbs of natural stone for external paving - Requirements and test methods


I.S. EN 1349:2000621.

Industrial process control valves


I.S. EN 1538:2000622.

Execution of special geotechnical works - Diaphragm walls


I.S. EN 1539:2000623.

Dryers and ovens, in which flammable substances are released - Safety requirements


I.S. EN 1559-2:2000624.

Founding - Technical conditions of delivery - Part 2: Additional requirements for steelcastings


I.S. EN 1634-1:2000625.

Fire resistance tests for door and shutter assemblies - Part 1: Fire doors and shutters


I.S. EN 1656:2000626.

Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluationof bactericidal activity of chemical disinfectants and antiseptics used in veterinary field -Test method and requirements (phase 2/step 1)


I.S. EN 1657:2000627.

Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluationof fungicidal activity of chemical disinfectants and antiseptics used in veterinary field -Test method and requirements (phase 2, step 1)


I.S. EN 1711:2000628.

Non-destructive examination of welds - Eddy current examination of welds by complexplane analysis


I.S. EN 1736:2000629.

Refrigerating systems and heat pumps - Flexible pipe elements, vibration isolators andexpansion joints - Requirements, design and installation


Date: 18/07/2018

I.S. EN 1766:2000630.

Products and systems for the protection and repair of concrete structures - Testmethods - Reference concretes for testing


I.S. EN 1775:1998/A2:2000631.

Gas supply - Gas pipework for buildings - Maximum operating pressure ≤ 5 bar -Functional recommendations


I.S. EN 1834-3:2000632.

Reciprocating internal combustion engines - Safety requirements for design andconstruction of engines for use in potentially explosive atmospheres - Part 3: Group IIengines for use in flammable dust atmospheres


I.S. EN 1859:2000633.

Chimneys - Metal Chimneys - Test Methods


I.S. EN 1989:2000634.

Thermoplatics piping systems - Joints for buried non-pressure sewerage applications -Test method for long-term sealing performance of joints with thermoplastic elastomer(TPE) seals by estimating the sealing pressure


I.S. EN ISO 3382:2000635.

Acoustics - Measurement of the reverberation time of rooms with reference to otheracoustical parameters (ISO 3382:1997)


I.S. EN ISO 4824:1996/A1:2000636.

Dentistry - Ceramic denture teeth (ISO 4824:1996/AM1:2000)


I.S. EN ISO 6873:2000637.

Dental gypsum products (ISO 6873:1998)


I.S. EN ISO 7393-2:2000638.

Water quality - Determination of free chlorine and total chlorine - Part 2: Chlorimetricmethod using N,N-diethyl-1, 4-phenylenediamine for routing control purposes (ISO 7393-2:1985)


I.S. EN ISO 7393-3:2000639.

Water quality - Determination of free chlorine and total chlorine - Part 3: Iodometrictitration method for the determination of total chlorine (ISO 7393-3:1990)


I.S. EN ISO 7438:2000640.

Metallic materials - Bend test (ISO 7438:1985)


I.S. EN 300220-1 V.1.2.1:2000641.

Electromagnetic compatibility and Radio spectrum Matters (ERM); Short range devices;Technical characteristics and test methods for radio equipment to beused in the 25 MHz to 1 000 MHz frequency range with power levelsranging up to 500 mW; Part 1: Parameters intended for regulatory purposes


Date: 18/07/2018

I.S. EN ISO 7799:2000642.

Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test(ISO 7799:1985)


I.S. EN ISO 9241-9:2000643.

Ergonomic requirements for office work with visual display terminals (VDTs) -Part 9: Requirements for non-keyboard input devices (ISO 9241-9:2000)


I.S. EN ISO 9606-5:2000644.

Approval testing of welders - Fusion welding - Part 5: Titanium and titanium alloys,zirconium and zirconium alloys


I.S. EN ISO 9913-2:2000645.

Optics and optical instruments - Contact lenses - Part 2: Determination of oxygenpermeability and transmissibility by the coulometric method (ISO 9913-2:2000)


I.S. EN 10028-7:2000646.

Flat products made of steels for pressure purposes - Part 7: Stainless steels


I.S. EN 10246-12:2000647.

Non-destructive testing of steel tubes - Part 12: Magnetic particle inspection of seamlessand welded ferromagnetic steel tubes for the detection of surface imperfections


I.S. EN 10273:2000648.

Hot rolled weldable steel bars for pressure purposes with specified elevated temperatureproperties


I.S. EN ISO 10504:2000649.

Starch derivatives - Determination of the composition of glucose syrups, fructose syrupsand hydrogenated glucose syrups - Method using high-performance liquidchromatography (ISO 10504:1998)


I.S. EN ISO 10715:2000650.

Natural gas - Sampling guidelines (ISO 10715:1997)


I.S. EN 12007-1:2000651.

Gas supply systems - Pipelines for maximum operating pressure up to and including 16bar - Part 1: General functional recommendations


I.S. EN 12007-2:2000652.

Gas supply systems - Pipelines for maximum operating pressure up to and including 16bar - Part 2: Specific functional recommendations for polyethylene (MOP up to andincluding 10 bar)


I.S. EN 12007-3:2000653.

Gas supply systems - Pipelines for maximum operating pressure up to and including 16bar - Part 3: Specific functional recommendations for steel


Date: 18/07/2018

I.S. EN ISO 12020:2000654.

Water quality - Determination of aluminium - Atomic absorption spectrometric methods(ISO 12020:1997)


I.S. EN 12046-2:2000655.

Operating forces - Test method - Part 2: Doors


I.S. EN 12186:2000656.

Gas supply systems - Gas pressure regulating stations for transmission and distribution- Functional requirements


I.S. EN 12259-4:2000657.

Fixed firefighting systems - Components for sprinkler and water spray systems -Part 4: Water motor alarms


I.S. EN 12326-2:2000658.

Slate and stone products for discontinuous roofing and cladding - Part 2: Methods of test


I.S. EN 12327:2001659.

Gas supply systems - Pressure testing, commissioning and decommissioningprocedures - Functional requirements


I.S. EN 12352:2000660.

Traffic control equipment - Warning and safety light devices


I.S. EN 12470-1:2000661.

Clinical thermometers - Part 1: Metallic liquid-in-glass thermometers with maximumdevice


I.S. EN 12470-3:2000662.

Clinical thermometers - Part 3: Performance of compact electrical thermometers (Non-predictive and predictive) with maximum device


I.S. EN 12473:2000663.

General principles of cathodic protection in sea water


I.S. EN 12495:2000664.

Cathodic protection for fixed steel offshore structures


I.S. EN 12535:2000665.

Welding consumables - Tubular cored electrodes for gas shielded metal arc welding ofhigh strength steels - Classification


I.S. EN 12536:2000666.

Welding consumables - Rods for gas welding of non alloy and creep-resisting steels -Classification


I.S. EN 12639:2000667.

Liquid pumps and pump units - Noise test code - Grade 2 and grade 3 of accuracy


Date: 18/07/2018

I.S. EN 12644-2:2000668.

Cranes - Information for use and testing -Part 2: Marking


I.S. EN 12785:2000669.

Footwear - Test methods for whole shoe - Heel attachment


I.S. EN 12800:2000670.

Footwear - Test methods for insoles - Dimensional stability


I.S. EN 12801:2000671.

Footwear - Test methods for insoles, lining and insocks - Perspiration resistance


I.S. EN 12803:2000672.

Footwear - Test methods for outsoles - Tensile strength and elongation


I.S. EN 12821:2000673.

Foodstuffs - Determination of vitamin D by high performance liquid chromatography -Measurement of cholecalciferol (D3) and ergocalciferol (D2)


I.S. EN 12823-2:2000674.

Foodstuffs - Determination of vitamin A by high performance liquid chromatography -Part 2: Measurement of ß-carotene


I.S. EN 12823-1:2000675.

Foodstuffs - Determination of vitamin A by high performance liquid chromatography -Part 1: Measurement of all-trans-retinol and 13-cis-retinol


I.S. EN 12838:2000676.

Installations and equipment for liquefied natural gas- Suitability testing of LNG samplingsystems


I.S. EN 12958:2000677.

Footwear - Test methods for shanks - Fatigue resistance


I.S. EN 12959:2000678.

Footwear - Test methods for shanks - Longitudinal stiffness


I.S. EN 12982:2000679.

Industrial valves - End-to-end and centre-to-end dimensions for butt welding end valves


I.S. EN 13056:2000680.

INLAND NAVIGATION VESSELS - STAIRS WITH INCLINATION ANGLES OF 30O TO< 45O - REQUIREMENTS, TYPES


I.S. EN 13221:2000681.

High-pressure flexible connections for use with medical gases


Date: 18/07/2018

I.S. EN 13299:2000682.

Fertilizers - Determination of flow rate


I.S. EN ISO 15098-2:2000683.

Dental tweezers - Part 2: Meriam types (ISO 15098-2:2000)


I.S. EN ISO 15098-3:2000684.

Dental tweezers - Part 3: College types (ISO 15098-3:2000)


I.S. EN 50177:1996685.

Automatic electrostatic spraying installations for flammable coating powder


I.S. EN 50176:1996686.

Automatic electrostatic spraying installations for flammable liquid spraying material


I.S. EN 175301-801:2000687.

Detail Specification: High density rectangular connectors, round removable crimpcontacts


I.S. EN 175101-802:2000688.

Detail specification: Two-part connectors for printed boards for high number of contactswith basic grid of 2,54 mm on 3 or 4 rows


I.S. EN 175301-803:2000689.

Detail Specification: Rectangular connectors - Flat contacts, 0,8 mm thickness, lockingscrew not detachable


I.S. EN 175201-804:2000690.

Detail Specification: Circular connectors - Round contacts, size diameter 1,6 mm,threaded coupling


I.S. EN 175101-809:2000691.

Detail Specification: Two-part connectors for printed boards having a grid of 2,54 mm,short version in compliance with CECC 75 101-801, with assessed quality


I.S. EN 50133-7:2000692.

Alarm systems - Access control systems for use in security applications -- Part 7:Application guidelines


I.S. EN 50144-2-1:2000693.

Safety of hand-held electric motor operated tools -- Part 2-1: Particular requirements fordrills


I.S. EN 50144-2-2:2000694.

Safety of hand-held electric motor operated tools -- Part 2-2: Particular requirements forscrewdrivers and impact wrenches


Date: 18/07/2018

I.S. EN 50144-2-4:2000695.

Safety of hand-held electric motor operated tools -- Part 2-4: Particular requirements forsanders


I.S. EN 50144-2-5:2000696.

Safety of hand-held electric motor operated tools -- Part 2-5: Particular requirements forcircular saws and circular knives


I.S. EN 50144-2-17:2000697.

Safety of hand-held electric motor operated tools -- Part 2-17: Particular requirementsfor routers


I.S. EN 50144-2-18:2000698.

Safety of hand-held electric motor operated tools -- Part 2-18: Particular requirementsfor laminate trimmers


I.S. EN 50146:2000699.

Cable ties for electrical installations


I.S. EN 50160:2000700.

Voltage characteristics of electricity supplied by public distribution systems


I.S. EN 50164-1:2000701.

Lightning Protection Components (LPC) -- Part 1: Requirements for connectioncomponents


I.S. EN 50170:1996/A2:2000702.

General purpose field communication system


I.S. EN 50173:1995/A1:2000703.

Information technology - Generic cabling systems


I.S. EN 50183:2000704.

Conductors for overhead lines - Aluminium-magnesium-silicon alloy wires


I.S. EN 50189:2000705.

Conductors for overhead lines - Zinc coated steel wires


I.S. EN 50194:2000706.

Electrical apparatus for the detection of combustible gases in domestic premises - Testmethods and performance requirements


I.S. EN 50200:2000707.

Method of test for resistance to fire of unprotected small cables for use in emergencycircuits


I.S. EN 50239:2000708.

Railway applications - Radio remote control system of traction vehicle for freight traffic


Date: 18/07/2018

I.S. EN 50263:2000709.

Electromagnetic compatibility (EMC) - Product standard for measuring relays andprotection equipment


I.S. EN 50268-1:2000710.

Common test methods for cables under fire conditions - Measurement of smoke densityof cables burning under defined conditions -- Part 1: Apparatus


I.S. EN 50268-2:2000711.

Common test methods for cables under fire conditions - Measurement of smoke densityof cables burning under defined conditions -- Part 2: Procedure


I.S. EN 50319:2000712.

Proximity devices - Requirements for proximity devices with analogue output


I.S. EN 50332-1:2000713.

Sound system equipment: Headphones and earphones associated with portable audioequipment - Maximum sound pressure level measurement methodology and limitconsiderations -- Part 1: General method for one package equipment


I.S. EN 60298:1996/A11:2000714.

A.C. metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up toand including 52 kV


I.S. EN 60335-1:1994/A14:2000715.

Safety of household and similar electrical appliances -- Part 1: General requirements


I.S. EN 60335-1:1994/A15:2000716.

Safety of household and similar electrical appliances -- Part 1: General requirements


I.S. EN 60383-1:1996/A11:2000717.

Insulators for overhead lines with a nominal voltage above 1 kV -- Part 1: Ceramic orglass insulator units for a.c. systems - Definitions, test methods and acceptance criteria


I.S. EN 60570:1998/A12:2000718.

Electrical supply track systems for luminaires


I.S. EN 60898:1991/A19:2000719.

Circuit-breakers for overcurrent protection for household and similar installations


I.S. EN 60920:1992/A11:2000720.

Ballasts for tubular fluorescent lamps - General and safety requirements


I.S. EN 60947-5-1:1997/A12:2000721.

Low-voltage switchgear and controlgear -- Part 5-1: Control circuit devices and switchingelements - Electromechanical control circuit devices


I.S. EN 61230:1995/A11:2000722.

Live working - Portable equipment for earthing or earthing and short-circuiting


Date: 18/07/2018

I.S. EN 61008-1:1994/A17:2000723.

Electrical accessories - Residual current operated circuit-breakers without integralovercurrent protection for household and similar uses (RCCB's) -- Part 1: General rules


I.S. EN 61800-3:1996/A11:2000724.

Adjustable speed electrical power drive systems -- Part 3: EMC product standardincluding specific test methods


I.S. EN 61009-1:1994/A19:2000725.

Electrical accessories - Residual current operated circuit-breakers with integralovercurrent protection for household and similar uses (RCBO's) -- Part 1: General rules


I.S. EN 61926-1:2000726.

Design automation -- Part 1: Standard test language for all systems - Commonabbreviated test language for all systems (C/ATLAS) (IEC 61926-1:1999 (EQV))


I.S. EN 60774-2:2000727.

Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on typeVHS -- Part 2: FM audio recording (IEC 60774-2:1999 (EQV))


I.S. EN 60335-2-64:2000728.

Safety of household and similar electrical appliances -- Part 2-64: Particularrequirements for commercial electric kitchen machines (IEC 60335-2-64:1997 (MOD))


I.S. EN 60317-48:2000729.

Specifications for particular types of winding wires -- Part 48: Glass-fibre wound resin orvarnish impregnated, bare or enamelled round copper wire, temperature index 155 (IEC60317-48:1999 (EQV))


I.S. EN 60317-49:2000730.



I.S. EN 60317-50:2000731.



I.S. EN 60317-38:1994/A2:2000732.

Specifications for particular types of winding wires -- Part 38: Polyester or polyesterimideovercoated with polyamide-imide enamelled round copper wire, class 200, with abonding layer (IEC 60317-38:1992/A2:1999 (EQV))


I.S. EN 60317-27:1998/A1:2000733.

Specifications for particular types of winding wires -- Part 27: Paper tape coveredrectangular copper wire (IEC 60317-27:1998/A1:1999 (EQV))


Date: 18/07/2018

I.S. EN 60044-7:2000734.

Instrument transformers -- Part 7: Electronic voltage transformers (IEC 60044-7:1999(EQV))


I.S. EN 60193:2000735.

Hydraulic turbines, storage pumps and pump-turbines - Model acceptance tests (IEC60193:1999 (EQV))


I.S. EN 60238:1998/A1:2000736.

Edison screw lampholders (IEC 60238:1998/A1:1999 (EQV))


I.S. EN 60505:2000737.

Evaluation and qualification of electrical insulation systems (IEC 60505:1999 (EQV))


I.S. EN 60601-1-4:1996/A1:2000738.

Medical electrical equipment -- Part 1-4: General requirements for safety - Collateralstandard: Programmable electrical medical systems (IEC 60601-1-4:1996/A1:1999(EQV))


I.S. EN 60660:2000739.

Insulators - Tests on indoor post insulators of organic material for systems with nominalvoltages greater than 1 kV up to but not including 300 kV (IEC 60660:1999 (EQV))


I.S. EN 60834-1:2000740.

Teleprotection equipment of power systems - Performance and testing -- Part 1:Command systems (IEC 60834-1:1999 (EQV))


I.S. EN 60838-1:1998/A1:2000741.

Miscellaneous lampholders -- Part 1: General requirements and tests (IEC 60838-1:1997/A1:1999 (EQV))


I.S. EN 60869-1:2000742.

Fibre optic attenuators -- Part 1: Generic specification (IEC 60869-1:1999 (EQV))


I.S. EN 60926:1996/A1:2000743.

Auxiliaries for lamps - Starting devices (other than glow starters) - General and safetyrequirements (IEC 60926:1995/A1:1999 (EQV))


I.S. EN 60927:1996/A1:2000744.

Auxiliaries for lamps - Starting devices (other than glow starters) - Performancerequirements (IEC 60927:1996/A1:1999 (EQV))


I.S. EN ISO/IEC 17025:2000745.

General requirements for the competence of testing and calibration laboratories(ISO/IEC 17025:1999)


Date: 18/07/2018

I.S. EN 145:1997/A1:2000746.

Respiratory protective devices - Self-contained closed-circuit breathing apparatuscompressed oxygen or compressed oxygen-nitrogen type - Requirements, testing,marking


I.S. EN ISO 175:2000747.

Plastics - Methods of test for the determination of the effects of immersion in liquidchemicals(ISO 175:1999)


I.S. EN 201:1997/A1:2000748.

Rubber and plastics machines - Injection moulding machines - Safety requirements


I.S. EN 241:2000749.

Liquid petroleum products - Determination of sodium content - Atomic absorptionspectrometric method


I.S. EN 397:1995/A1:2000750.

Industrial safety helmets


I.S. EN 453:2000751.

Food processing machinery - Dough mixers - Safety and hygiene requirements


I.S. EN 454:2000752.

Food processing machinery - Planetary mixers - Safety and hygiene requirements


I.S. EN 603-3:2000753.

Aluminium and aluminium alloys - Wrought forging stock - Part 3: Tolerances ondimensions and form


I.S. EN 708:1996/A1:2000754.

Agricultural machinery - Soil working machines with powered tools - Safety


I.S. EN 771-2:2000755.

Specification for masonry units - Part 2: Calcium silicate masonry units


I.S. EN 771-4:2000756.

Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units


I.S. EN 772-11:2000757.

Methods of test for masonry units - Part 11: Determination of water absorption ofaggregate concrete, manufactured stone and natural stone masonry units due tocapillary action and the initial rate of water absorption of clay masonry units


I.S. EN 772-15:2000758.

Methods of test for masonry units - Part 15: Determination of water vapour permeabilityof autoclaved aerated concrete masonry units


Date: 18/07/2018

I.S. EN 772-18:2000759.

Methods of test for masonry units - Part 18: Determination of freeze-thaw resistance ofcalcium silicate masonry units


I.S. EN 772-19:2000760.

Methods of test for masonry units - Part 19: Determination of moisture expansion oflarge horizontally perforated clay masonry units


I.S. EN 772-20:2000761.

Methods of test for masonry units - Part 20: Determination of flatness of faces ofaggregate concrete, manufactured stone and natural stone masonry units


I.S. EN 818-6:2000762.

Short link chain for lifting purposes - Safety - Part 6: Chain slings - Specification forinformation for use and maintenance to be provided by the manufacturer


I.S. EN 846-3:2000763.

Methods of test for ancillary components for masonry - Part 3: Determination of shearload capacity of welds in prefabricated bed joint reinforcement


I.S. EN 846-5:2000764.

Methods of test for ancillary components for masonry - Part 5: Determination of tensileand compressive load capacity and load displacement characteristics of wall ties (coupletest)


I.S. EN 846-7:2000765.

Methods of test for ancillary components for masonry - Part 7: Determination of shearload capacity and load displacement characteristics of shear ties and slip ties (couplettest for mortar joint connections)


I.S. EN 868-9:2000766.

Packaging materials and systems for medical devices which are to be sterilized -Part 9: Uncoated nonwoven materials of poolyolefines for use in the manufacture of heatsealable pouches, reels and lids - Requirements and test methods


I.S. EN 868-10:2000767.

Packaging materials and systems for medical devices which are to be sterilized -Part 10: Adhesive coated nonwoven materials of polyolefines for use in the manufactureof heat sealable pouches, reels and lids - Requirements and test methods


I.S. EN 894-3:2000768.

Safety of machinery - Ergonomics requirements for the design of displays and controlactuators - Part 3: Control actuators


I.S. EN 966:1996/A1:2000769.

Helmets for airborne sports


I.S. EN 1015-17:2000770.

Methods of test for mortar for masonry - Part 17: Determination of water-soluble chloridecontent of fresh mortars


Date: 18/07/2018

I.S. EN 1082-2:2000771.

Protective clothing - Gloves and arm guards protecting against cuts and stabs by handknives - Part 2: Gloves and arm guards made of material other than chain mail


I.S. EN 1191:2000772.

Windows and doors - Resistance to repeated opening and closing - Test method


I.S. EN 1414:1996/A1:2000773.

Touch and close fasteners - Cycling procedure for subsequent testing


I.S. EN ISO 1854:2000774.

Whey cheese – Determination of fat content – Gravimetric method (reference method)(ISO 1854:1999)


I.S. EN ISO 3262-8:1999775.

Extenders for paints – Specifications and methods of test – Part 8: Natural clay(ISO 3262-8:1999)


I.S. EN ISO 9363-1:1999776.

Optics and optical instruments – Contact lenses – Determination of cytotoxicity ofcontact lens material – Part 1: Agar overlay test and growth inhibition test (ISO 9363-1:1994)


I.S. EN ISO 9488:2000777.

Solar energy – Vocabulary (ISO 9488:1999)


I.S. EN 10253-1:2000778.

Butt-welding pipe fittings – Part 1: Wrought carbon steel for general use and withoutspecific inspection requirements


I.S. EN 1487:2000779.

Building valves - Hydraulic safety groups - tests and requirements


I.S. EN 1488:2000780.

Building valves - Expansion groups - Tests and requirements


I.S. EN 1489:2000781.

Building valves - Pressure safety valves - Tests and requirements


I.S. EN ISO 14660-1:2000782.

Geometric product specifications (GPS) – Geometical features – Part 1: General termsand definitions (ISO 14660-1:1999)


I.S. EN 1490:2000783.

Building valves - Combined temperature and pressure relief valves - Tests andrequirements


I.S. EN 1491:2000784.

Building valves - Expansion valves - Tests and requirements


Date: 18/07/2018

I.S. EN ISO 1518:2000785.

Paints and varnishes - Scratch test (ISO 1518:1992)


I.S. EN ISO 14660-2:2000786.

Geometrical product specifications (GPS) – Geometrical features – Part 2: Extractedmedian line of a cylinder and a cone, extracted median surface, local size of anextracted feature (ISO 14660-2:1999)


I.S. EN 1533:2000787.

Wood and parquet flooring - Determination of bending properties - Test methods


I.S. EN 1534:2000788.

Wood and parquet flooring - Determination of resistance to indentation (Brinell) - Testmethod


I.S. EN 1594:2000789.

Gas supply systems - Pipelines for maximum operating pressure over 16 bar -Functional requirements


I.S. EN ISO 1736:2000790.

Dried milk and dried milk products - Determination of fat content - Gravimetric method(Reference method) (ISO 1736:2000)


I.S. EN 1755:2000791.

Safety of Industrial trucks - Operation in potentially explosive atmospheres - Use inflammable gas, vapour, mist and dust


I.S. EN 1772:2000792.

Surface active agents - Determination of wetting power by immersion(ISO 8022:1990 modified)


I.S. EN 1787:2000793.

Foodstuffs - Detection of irradiated food containing cellulose by ESR spectroscopy


I.S. EN 1928:2000794.

Flexible sheets for waterproofing – Bitumen, plastic and rubber sheets for roofwaterproofing – Determination of watertightness


I.S. EN 1964-3:2000795.

Transportable gas cylinders - Specification for the design and construction ofrefillable transportable seamless steel gas cylinders of water capacities from 9,5litre up to an including 150 litres - Part 3: Cylinders made of seamless stainlesssteel with an R value of less than 1100 MPa


I.S. EN ISO 2064:2000796.

Metallic and other inorganic coatings - Definitions and conventions concerning themeasurement of thickness (ISO 2064:1996)


Date: 18/07/2018

I.S. EN ISO 2495:2000797.

Iron blue pigments - Specifications and methods of test (ISO 2495:1995)


I.S. EN ISO 3248:2000798.

Paints and varnishes - Determination of the effect of heat (ISO 3248:1998)30 JUNE 2000Date published

I.S. EN ISO 3405:2000799.

Petroleum products - Determination of distillation characteristics at atmosphericpressure (ISO 3405:2000)


I.S. EN ISO 3452-2:2000800.

Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials(ISO 3452-2:2000)


I.S. EN ISO 4063:2000801.

Welding and allied processes - Nomenclature of processes and reference numbers(ISO 4063:1998)


I.S. EN 4179:2000802.

Aerospace series - Qualification and approval of personnel for non-destructive testing


I.S. EN ISO 4617:2000803.

Paints and varnishes - List of equivalent terms (ISO 4617:2000)


I.S. EN ISO 5436-1:2000804.

Geometrical Product Specifications (GPS) - Surface texture: Profile method;Measurement standards - Part 1: Material measures (ISO 5436-1:2000)


I.S. EN ISO 6320:2000805.

Animal and vegetable fats and oils - Determination of refractive index (ISO 6320:2000)


I.S. EN ISO 6603-1:2000806.

Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1: Non-instrumented impact testing (ISO 6603-1:2000)


I.S. EN ISO 6945:1996/A1:2000807.

Rubber hoses - Determination of abrasion resistance of the outer cover(ISO 6945:1991, amendment 1: 1998)


I.S. EN ISO 7096:2000808.

Earth-moving machinery - Laboratory evaluation of operator seat vibration(ISO 7096:2000)


I.S. EN ISO 7837:2000809.

Fertilizers - Determination of bulk density (loose) of fine-grained fertilizers(ISO 7837:1992)


Date: 18/07/2018

I.S. EN ISO 7393-1:2000810.

Water quality - Determination of free chlorine and total chlorine - Part 1: Titrimetricmethod using N,N-diethyl-1,4 phenylenediamine (ISO 7393-1:1985)


I.S. EN ISO 7980:2000811.

Water quality - Determination of calcium and magnesium - Atomic absorptionspectrometric method (ISO 7980:1986)


I.S. EN ISO 8321-2:2000812.

Ophthalmic optics - Specifications for material, optical and dimensional properties ofcontact lenses - Part 2: Single-vision hydrogel lenses (ISO 8321-2:2000)


I.S. EN ISO 8330:2000813.

Rubber and plastics hoses and hose assemblies - Vocabulary(ISO 8330:1998)


I.S. EN ISO 8689-1:2000814.

Water quality - Biological classification of rivers - Part 1: Guidance on the interpretationof biological quality data from surveys of benthic macroinvertebrates (ISO 8689-1:2000)


I.S. EN ISO 8689-2:2000815.

Water quality - Biological classification of rivers - Part 2: Guidance on the presentation ofbiological quality data from surveys of benthic macroinvertebrates (ISO 8689-2:2000)


I.S. EN ISO 9360-1:2000816.

Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) forhumidifying respired gases in humans - Part 1: HMEs for use with minimum tidalvolumes of 250 ml (ISO 9360-1:2000)


I.S. EN 10020:2000817.

Definition and classification of grades of steel


I.S. EN ISO 10075-2:2000818.

Ergonomic principles related to mental workload - Part 2: Design principles (ISo 10075-2:1996)


I.S. EN 10132-1:2000819.

Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 1:General


I.S. EN 10132-2:2000820.

Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 2:Case hardening steels


I.S. EN 10132-3:2000821.

Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 3:Steels for quenching and tempering


Date: 18/07/2018

I.S. EN 10132-4:2000822.

Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 4:Spring steels and other applications


I.S. EN 10246-2:2000823.

Non-destructive testing of steel tubes - Part 2: Automatic eddy current testing ofseamless and welded (except submerged arc-welded) austenitic and austenitic-ferriticsteel tubes for verification of hydraulic lead-tightness


I.S. EN 10246-9:2000824.

Non-destructive testing of steel tubes - Part 9: Automatic ultrasonic testing of the weldseam of submerged arc welded steel tubes for the detection of longitudinal and/ortransverse imperfections


I.S. EN 10246-11:2000825.

Non-destructive testing of steel tubes - Part 11: Liquid penetrant testing of seamlessand welded steel tubes for the detection of surface imperfections


I.S. EN 10246-13:2000826.

Non-destructive testing of steel tubes - Part 13: Automatic full peripheral ultrasonicthickness testing for seamless and welded (except submerged arc welded) steel tubes


I.S. EN 10246-15:2000827.

Non-destructive testing of steel tubes - Part 15: Automatic ultrasonic testing of strip/plateused in the manufacture of welded steel tubes for the detection of laminar imperfections


I.S. EN 10246-16:2000828.

Non-destructive testing of steel tubes - Part 16: Automatic ultrasonic testing of the areaadjacent to the weld seam of welded steel tubes for the detection of laminarimperfections


I.S. EN 10246-17:2000829.

Non-destructive testing of steel tubes - part 17: Ultrasonic testing of tube ends ofseamless and welded steel tubes for the detection of laminar imperfections


I.S. EN 10246-18:2000830.

Non-destructive testing of steel tubes - Part 18: Magnetic particle inspection of tubeends of seamless and welded ferromagnetic steel tubes for the detection of laminarimperfections


I.S. EN 10284:2000831.

Malleable cast iron fittings with compression ends for polyethylene (PE) piping systems


I.S. EN ISO 10360-3:2000832.

Geometrical Product Specifications (GPS) - Acceptance and reverification tests forcoordinate measuring machines (CMM) - Part 3: CMMs with the axis of a rotary table asthe forth axis(ISO 10360-3:2000)


Date: 18/07/2018

I.S. EN ISO 10360-4:2000833.

Geometrical Products Specifications (GPS) - Acceptance and reverification tests forcoordinate measuring machines (CMM) - Part 4: CMMs used in scanning measuringmode (ISO 10360-4:2000)


I.S. EN ISO 10426-1:2000834.

Petroleum and natural gas industries - Cements and materials for well cementing - Part1: Specification (ISO 10426-1:2000)


I.S. EN ISO 11737-2:2000835.

Sterilization of medical devices - Microbiological methods - Part 2: Tests of sterilityperformed in the validation of a sterilization process (ISO 11737-2:1998)


I.S. EN ISO 11978:2000836.

Ophthalmic optics - Contact lenses and contact lens care products - Informationsupplied by the manufacturer (ISO 11978:2000)


I.S. EN ISO 11816-1:2000837.

Milk and milk products - Determination of alkaline phosphatase activity using afluorimetric method - Part 1: Milk and milk-based drinks (ISO 11816-1:1997)


I.S. EN 12012-1:2000838.

Rubber and plastics machines - Size reduction machines - Part 1: Safety requirementsfor blade granulators


I.S. EN 12114:2000839.

Thermal performance of buildings - Air permeability of building components and buildingelements - Laboratory test method


I.S. EN ISO 12156-1:2000840.

Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) -Part 1: Test method (ISO 12156-1:1997, including Technical Corrigendum 1: 1998)


I.S. EN ISO 12179:2000841.

Geometrical Product Specifications (GPS) - Surface texture: Profile method - Calibrationof contact (stylus) instruments (ISO 12179:2000)


I.S. EN 12180:2000842.

Non-active surgical implants - Body contouring implants - Specific requirements formammary implants


I.S. EN 12279:2000843.

Gas supply systems - Gas pressure regulating installation on service lines - Functionalrequirements


I.S. EN 12329:2000844.

Corrosion protection of metals - Electrodeposited coatings of zinc with supplementarytreatment on iron or steel


Date: 18/07/2018

I.S. EN 12354-2:2000845.

Building acoustics - Estimation of acoustic performance of buildings from theperformance of elements - Part 2: Impact sound insulation between rooms


I.S. EN 12354-3:2000846.

Building acoustics - Estimation of acoustic performance of buildings from theperformance of elements - Part 3: Airborne sound insulation against outdoor sound


I.S. EN 12392:2000847.

Aluminium and aluminium alloys - Wrought products - Special requirements for productsintended for the production of pressure equipment


I.S. EN 12492:2000848.

Mountaineering equipment - Helmets for mountaineers - Safety requirements and testmethods


I.S. EN 12504-1:2000849.

Testing concrete in structures - Part 1: Cored specimens - Taking, examining andtesting in compression


I.S. EN 12508:2000850.

Corrosion protection of metals and alloys - Surface treatment, metallic and otherinorganic coatings - Vocabulary


I.S. EN 12514-1:2000851.

Installations for oil supply systems for oil burners - Part 1: Safety requirements andtests; Parts, oil feed pumps, control and safety devices, supply tanks


I.S. EN 12514-2:2000852.

Installations for oil supply systems for oil burners - Part 2: Safety requirements andtests; Parts, valves, pipes, filters, oil de-aerators, meters


I.S. EN 12544-2:2000853.

Non-destructive testing - Measurement and evaluation of the X-ray tube voltage -Part 2: Constancy check by the thick filter method


I.S. EN 12545:2000854.

Footwear, leather and imitation leather goods manufacturing machines - Noise test code- Common requirements


I.S. EN ISO 12570:2000855.

Hygrothermal performance of building materials and products - Determination ofmoisture content by drying at elevated temperature (ISO 12570:2000)


I.S. EN ISO 12571:2000856.

Hygrothermal performance of building materials and products - Determination ofhygroscopic sorption properties (ISO 12571:2000)


Date: 18/07/2018

I.S. EN 12573-2:2000857.

Welded static non-pressurised thermoplastic tanks - Part 2: Calculation of verticalcylindrical tanks


I.S. EN 12573-3:2000858.

Welded static non-pressurised thermoplastic tanks - Part 3: Design and calculation forsingle skin rectangular tanks


I.S. EN 12573-4:2000859.

Welded static non-pressurised thermoplastic tanks - Part 4: Design and calculation offlanged joints


I.S. EN 12599:2000860.

Ventilation for buildings - Test procedures and measuring methods for handing overinstalled ventilation and air conditioning systems


I.S. EN 12668-3:2000861.

Non-destructive testing - Characterization and verification of ultrasonic examinationequipment - Part 3: Combined equipment


I.S. EN 12676-1:2000862.

Anti-glare systems for roads - Part 1: Performance and characteristics


I.S. EN 12676-2:2000863.

Anti-glare systems for roads - Part 2: Test methods


I.S. EN 12696:2000864.

Cathodic protection of steel in concrete


I.S. EN 12746:2000865.

Footwear - Test methods for insoles and insocks - Water absorption and desorption


I.S. EN 12766-1:2000866.

Petroleum products and used oils - Determination of PCBs and related products - Part 1:Separation and determination of selected PCB congeners by gas chromatography (GC)using an electron capture detector (ECD)


I.S. EN 12767:2000867.

Passive safety of support structures for road equipment - Requirements and testmethods


I.S. EN 12822:2000868.

Foodstuffs - Determination of vitamin E by high performance liquid chromatography -Measurement of and tocopherols


I.S. EN 12826:2000869.

Footwear - Test methods for lining and insocks - Static friction


Date: 18/07/2018

I.S. EN 12842:2000870.

Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods


I.S. EN 12890:2000871.

Founding - Patterns, pattern equipment and coreboxes for the production of sandmoulds and sand cores


I.S. EN 12892:2000872.

Founding - Equipment for the production of lost patterns for the lost foam castingprocess


I.S. EN 12893:2000873.

Copper and copper alloys - Determination of spiral elongation number


I.S. EN 12952-4:2000874.

Water-tube boilers and auxiliary installations - Part 4: In-service boiler life expectancycalculations


I.S. EN 12980:2000875.

Materials and articles in contact with foodstuffs - Non-metallic articles for catering andindustrial use - Method of test for the determination of impact resistance


I.S. EN 13087-1:2000876.

Protective helmets - Test methods - Part 1: Conditions and conditioning


I.S. EN 13087-2:2000877.

Protective helmets - Test methods - Part 2: Shock absorption


I.S. EN 13087-3:2000878.

Protective helmets - Test methods - Part 3: Resistance to penetration


I.S. EN 13087-6:2000879.

Protective helmets - Test methods - Part 6: Field of vision


I.S. EN 13131:2000880.

Liquid petroleum products - Determination of nickel and vanadium content - Atomicabsorption spectrometric method


I.S. EN 13132:2000881.

Liquid petroleum products - Unleaded petrol - Determination of organic oxygenatecompounds and total organically bound oxygen content by gas chromatography usingcolumn switching


I.S. EN 13158:2000882.

Protective clothing - Protective jackets, body and shoulder protectors for horse riders -Requirements and test methods

7 JULY 2000Date published

I.S. EN 13196:2000883.

Fruit and vegetable juices - Determination of total sulfur dioxide by distillation


Date: 18/07/2018

I.S. EN 13215:2000884.

Condensing units for refrigeration - Rating conditions, tolerances and presentation ofmanufacturer’s performance data


I.S. EN 13319:2000885.

Diving accessories - Depth guages and combined depth and time measuring devices -Functional and safety requirements, test methods


I.S. EN 13503-8:2000886.

Ophthalmic implants - Intraocular lenses - Part 8: Fundamental requirements(ISO 11979-8:1999, modified)


I.S. EN 13562:2000887.

Geotextiles and geotextile-related products - Determination of resistance to penetrationby water(hydrostatic pressure test)


I.S. EN ISO 13734:2000888.

Natural gas - Organic sulfur compounds used as odorants - Requirements and testmethods (ISO 13734:2000)


I.S. EN ISO 13937-1:2000889.

Textiles - Tear properties of fabrics -Part 1: Determination of tear force using ballistic pendulum method (Elmendorf)(ISO 13937-1:2000)


I.S. EN ISO 13937-2:2000890.

Textiles - Tear properties of fabrics -Part 2: Determination of tear force of trouser-shaped test specimens (Single tearmethod) (ISO 13937-2:2000)


I.S. EN ISO 13937-3:2000891.

Textiles - Tear properties of fabrics -Part 3: Determination of tear force of wing-shaped test specimens (Single tear method)(ISO 13937-3:2000)


I.S. EN ISO 13937-4:2000892.

Textiles - Tear properties of fabrics -Part 4: Determination of tear force of tongue-shaped test specimens (Double tear test)(ISO 13937-4:2000)


I.S. EN ISO 14042:2000893.

Environmental management - Life cycle assessment - Life cycle impact assessment(ISO 14042:2000)


I.S. EN ISO 14043:2000894.

Environmental management - Life cycle assessment - Life cycle interpretation(ISO 14043:2000)


Date: 18/07/2018

I.S. EN ISO 15225:2000895.

Nomenclature - Specification for a nonmenclature system for medical devices for thepurpose of regulatory data exchange (ISO 15225:2000)


I.S. EN 45510-2-3:2000896.

Guide for procurement of power station equipmetn - Part 2-3: Electrical equipment -Stationary batteries and chargers


I.S. EN 45510-2-4:2000897.

Guide for procurement of power station equipment - Part 2-4: Electrical equipment -High power static convertors


I.S. EN 45510-2-6:2000898.

Guide for procurement of power station equipment - Part 2-6: Electrical equipment -Generators


I.S. EN 60068-2-47:2000899.

Environmental testing -- Part 2-47: Test methods - Mounting of components, equipmentand other articles for vibration, impact and similar dynamic tests (IEC 60068-2-47:1999(EQV))


I.S. EN 60099-1:1994/A1:2000900.

Surge arresters -- Part 1: Non-linear resistor type gapped surge arresters for a.c.systems (IEC 60099-1:1991/A1:1999 (EQV))


I.S. EN 60439-1:2000901.

Low-voltage switchgear and controlgear assemblies -- Part 1: Type-tested and partiallytype-tested assemblies (IEC 60439-1:1999 (EQV))


I.S. EN 60335-2-5:1995/A2:2000902.

Safety of household and similar electrical appliances -- Part 2-5: Particular requirementsfor dishwashers (IEC 60335-2-5:1992/A2:1999 (EQV))


I.S. EN 60335-2-21:1999/A1:2000903.

Safety of household and similar electrical appliances -- Part 2-21: Particularrequirements for storage water heaters (IEC 60335-2-21:1997/A1:1999 (EQV))


I.S. EN 60335-2-82:2000904.

Safety of household and similar electrical appliances -- Part 2-82: Particularrequirements for service machines and amusement machines (IEC 60335-2-82:1999(EQV))


I.S. EN 60427:2000905.

Synthetic testing of high-voltage alternating current circuit-breakers (IEC 60427:2000(EQV))


I.S. EN 60439-2:2000906.

Low-voltage switchgear and controlgear assemblies -- Part 2: Particular requirementsfor busbar trunking systems (busways) (IEC 60439-2:2000 (EQV))


Date: 18/07/2018

I.S. EN 60947-5-1:1997/A2:2000907.

Low-voltage switchgear and controlgear -- Part 5-1: Control circuit devices and switchingelements - Electromechanical control circuit devices (IEC 60947-5-1:1997/A2:1999(EQV))


I.S. EN 61340-2-3:2000908.

Electrostatics -- Part 2-3: Methods of test for determining the resistance and resistivity ofsolid planar materials used to avoid electrostatic charge accumulation (IEC 61340-2-3:2000 (EQV))


I.S. EN 61966-3:2000909.

Multimedia systems and equipment - Colour measurement and management -- Part 3:Equipment using cathode ray tubes (IEC 61966-3:2000 (EQV))


I.S. EN 61966-4:2000910.

Multimedia systems and equipment - Colour measurement and management -- Part 4:Equipment using liquid crystal display panels (IEC 61966-4:2000 (EQV))


I.S. EN 60099-5:1996/A1:2000911.

Surge arresters -- Part 5: Selection and application recommendations (IEC 60099-5:1996/A1:1999 (EQV))


I.S. EN 61316:2000912.

Industrial cable reels (IEC 61316:1999 (EQV))


I.S. EN 61557-9:2000913.

Electrical safety in low voltage distribution systems up to 1 kV a.c. and 1,5 kV d.c. -Equipment for testing, measuring or monitoring of protective measures -- Part 9:Equipment for insulation fault location in IT systems (IEC 61557-9:1999 (EQV))


I.S. EN 61595-3:2000914.

Multichannel digital audio tape recorder (DATR), reel-to-reel system, for professionaluse -- Part 3: 24-bit operation for 16-bit media (IEC 61595-3:1999 (EQV))


I.S. EN 61599:2000915.

Videodisk players - Methods of measurement (IEC 61599:1999 (EQV))


I.S. EN 61663-1:2000916.

Lightning protection - Telecommunication lines -- Part 1: Fibre optic installations (IEC61663-1:1999 (EQV) + corrigendum Oct. 1999 (EQV))


I.S. EN 61881:2000917.

Railway applications - Rolling stock equipment - Capacitors for power electronics (IEC61881:1999 (EQV))


I.S. EN 61954:2000918.

Power electronics for electrical transmission and distribution systems - Testing ofthyristor valves for static VAR compensators (IEC 61954:1999 (EQV))


Date: 18/07/2018

I.S. EN 62005-4:2000919.

Reliability of fibre optic interconnecting devices and passive optical components -- Part4: Product screening (IEC 62005-4:1999 (EQV))


I.S. EN 60947-4-3:2000920.

Low-voltage switchgear and controlgear -- Part 4-3: Contactors and motor-starters - ACsemiconductor controllers and contactors for non-motor loads (IEC 60947-4-3:1999(EQV))


I.S. EN 61076-3:2000921.

Connectors for use in d.c., low-frequency analogue and digital high-speed dataapplications -- Part 3: Rectangular connectors with assessed quality - Sectionalspecification (IEC 61076-3:1999 (EQV))


I.S. EN 61076-3-001:2000922.

Connectors for use in d.c., low-frequency analogue and digital high-speed dataapplications -- Part 3-001: Rectangular connectors with assessed quality - Blank detailspecification (IEC 61076-3-001:1999 (EQV))


I.S. EN 61076-3-100:2000923.

Connectors for use in d.c., low-frequency analogue and digital high speed dataapplications -- Part 3-100: Rectangular connectors with assessed quality - Detailspecification for a range of shielded connectors with trapezoidal-shaped shells and non-removable ribbon contacts on a 1,27 mm double row (IEC 61076-3-100:1999 (EQV))


I.S. EN 62056-31:2000924.

Electricity metering - Data exchange for meter reading, tariff and load control -- Part 31:Use of local area networks on twisted pair with carrier signalling (IEC 62056-31:1999(EQV))


I.S. EN 60191-3:2000925.

Mechanical standardization of semiconductor devices -- Part 3: General rules for thepreparation of outline drawings of integrated circuits (IEC 60191-3:1999 (EQV))


I.S. EN 60191-4:2000926.

Mechanical standardization of semiconductor devices -- Part 4: Coding system andclassification into forms of package outlines for semiconductor device packages (IEC60191-4:1999 (EQV))


I.S. EN 60335-2-3:1995/A1:2000927.

Safety of household and similar electrical appliances -- Part 2-3: Particular requirementsfor electric irons (IEC 60335-2-3:1993/A1:1999 (EQV))


I.S. EN 60669-1:2000928.

Switches for household and similar fixed-electrical installations -- Part 1: Generalrequirements (IEC 60669-1:1998 (MOD))


I.S. EN 60968:1990/A2:2000929.

Self-ballasted lamps for general lighting services - Safety requirements (IEC60968:1988/A2:1999 (EQV))


Date: 18/07/2018

I.S. EN 60990:2000930.

Methods of measurement of touch current and protective conductor current (IEC60990:1999 (EQV))


I.S. EN 61023:2000931.

Maritime navigation and radiocommunication equipment and systems - Marine speedand distance measuring equipment (SDME) - Performance requirements - Methods oftesting and required test results (IEC 61023:1999 (EQV))


I.S. EN 61169-31:2000932.

Radio-frequency connectors -- Part 31: RF coaxial connectors with inner diameter ofouter conductor 1,0 mm (0,039 in) with screw coupling - Characteristic impedance 50ohms (type 1,0) (IEC 61169-31:1999 (EQV))


I.S. EN 61169-32:2000933.

Radio-frequency connectors -- Part 32: RF coaxial connectors with inner diameter ofouter conductor 1,85 mm (0,072 in) with screw coupling - Characteristic impedance 50ohms (type 1,85) (IEC 61169-32:1999 (EQV))


I.S. EN 61189-3:1997/A1:2000934.

Test methods for electrical materials, printed boards and other interconnectionstructures and assemblies -- Part 3: Test methods for interconnection structures (printedboards) (IEC 61189-3:1997/A1:1999 (EQV))


I.S. EN 40-5:2000935.

Lighting columns - Part 5: Specification for steel lighting columns


I.S. EN 40-6:2000936.

Lighting columns - Part 6: Specification for aluminium lighting columns


I.S. EN 71-3:1994/A1:2000937.

Safety of toys - Part 3: Migration of certain elements


I.S. EN 172:1994/A1:2000938.

Personal eye protection - Sunglare filters for industrial use


I.S. EN 414:2000939.

Safety of machinery - Rules for the drafting and presentation of safety standards


I.S. EN 415-1:2000940.

Packaging machines safety - Part 1: Terminology and classification of packagingmachines and associated equipment


I.S. EN 1034-1:2000941.

Safety of machinery - Safety requirements for the design and construction of papermaking and finishing machines - Part 1: Common requirements


Date: 18/07/2018

I.S. EN 1052-4:2000942.

Methods of test for masonry - Part 4: Determination of shear strength including dampproof course


I.S. EN 1074-1:2000943.

Valves for water supply - Fitness for purpose requirements and appropriate verificationtests - Part 1: General requirements


I.S. EN 1074-2:2000944.

Valves for water supply - Fitness for purpose requirements and appropriate verificationtests - Part 2: Isolating valves


I.S. EN 1074-3:2000945.

Valves for water supply - Fitness for purpose requirements and appropriate verificationtests - Part 3: Check valves


I.S. EN 1082-3:2000946.

Protective clothing - Gloves and arm guards protecting against cuts and stabs by handknives - Part 3: Impact cut test for fabric, leather and other materials


I.S. EN 1317-3:2000947.

Road restraint systems - Part 3: Performance classes, impact test acceptance criteriaand test methods for crash cushions


I.S. EN 1335-1:2000948.

Office furniture - Office work chair -Part 1: Dimensions - Determination of dimensions


I.S. EN ISO 1522:2000949.

Paints and varnishes - Pendulum damping test (ISO 1522:1997)


I.S. EN 1551:2000950.

Safety of industrial trucks - Self propelled trucks over 10 000 kg capacity


I.S. EN ISO 1567:2000951.

Dentistry - Denture base polymers (ISO 1567:1999)


I.S. EN ISO 1746:2000952.

Rubber or plastic hoses and tubing - Bending tests (ISO 1746:1998, including technicalcorrigendum 1: 1999)


I.S. EN 1806:2000953.

Chimneys - Clay/ceramic flue blocks for single wall chimneys - Requirements and testmethods


I.S. EN 1946-4:2000954.

Thermal performance of building products and components - Specific criteria for theassessment of laboratories measuring heat transfer properties - Part 4: Measurementsby hot box methods


Date: 18/07/2018

I.S. EN ISO 2411:2000955.

Rubber- or plastics-coated fabrics - Determination of coating adhesion (ISO 2411:2000)


I.S. EN ISO 3262-14:2000956.

Extenders for paints - Specifications and methods of test - Part 14: Cristobalite (ISO3262-14:2000)


I.S. EN ISO 3262-16:2000957.

Extenders for paints - Specifications and methods of test - Part 16: Aluminiumhydroxides (ISO 3262-16:2000)


I.S. EN ISO 3262-17:2000958.

Extenders for paints - Specifications and methods of test - Part 17: Precipitated calciumsilicate (ISO 3262-17:2000)


I.S. EN ISO 3262-18:2000959.

Extenders for paints - Specifications and methods of test - Part 18: Precipitated sodiumaluminium silicate (ISO 3262:2000)


I.S. EN ISO 3262-19:2000960.

Extenders for paints - Specifications and methods of test - Part 19: Precipitated silica(ISO 3262-19:2000)


I.S. EN ISO 3262-20:2000961.

Extenders for paints - Specifications and methods of test - Part 20: Fumed silica(ISO 3262-20:2000)


I.S. EN ISO 3262-21:2000962.

Extenders for paints - Specifications and methods of test - Part 21: Silica sand(underground natural quartz) (ISO 3262:2000)


I.S. EN ISO 3596-1:2000963.

Animal and vegetable fats and oils - Determination of unsaponifiable matter - Part 1:Method using diethyl ether extraction (Reference method) (ISO 3596-1:1988, includingAmendment 1: 1997)


I.S. EN ISO 3994:2000964.

Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction anddischarge of aqueous materials - Specification (ISO 3994:1998)


I.S. EN ISO 4671:2000965.

Rubber and plastics hose and hose assemblies - Methods of measurement ofdimensions (ISO 4671:1999)


I.S. EN ISO 4796-1:2000966.

Laboratory glassware - Bottles - Part 1: Screw-neck bottles (ISO 4796-1:2000)


I.S. EN ISO 4796-2:2000967.

Laboratory glassware - Bottles - Part 2: Conical neck bottles (ISO 4796-2:2000)


Date: 18/07/2018

I.S. EN ISO 4796-3:2000968.

Laboratory glassware - Bottles - Part 3: Aspirator bottles (ISO 4796-3:2000)


I.S. EN ISO 5183-1:2000969.

Resistance welding equipment - Electrode adaptors, male taper 1:10 - Part 1: Conicalfixing, taper 1:10 (ISO 5183-1:1998)


I.S. EN ISO 5509:2000970.

Animal and vegetable fats and oils - Preparation of methyl esters of fatty acids (ISO5509:2000)


I.S. EN ISO 5774:2000971.

Plastics hoses, textile-reinforced, for compressed air - Specification (ISO 5774:1997)


I.S. EN ISO 5778:2000972.

Ships and marine technology - Small weathertight steel hatches(ISO 5778:1998)


I.S. EN ISO 6042:2000973.

Ships and marine technology - Weathertight single-leaf steel doors (ISO 6042:1998)


I.S. EN ISO 6808:2000974.

Plastics hoses and hose assemblies for suction and low-pressure discharge ofpetroleum liquids - Specification (ISO 6808:1999)


I.S. EN ISO 7899-2:2000975.

Water quality - Detection and enumeration of intestinal enterococci - Part 2: Membranefiltration method (ISO 7899-2:2000)


I.S. EN ISO 9439:2000976.

Water quality - Evaluation of ultimate aerobic biodegradability or organic compounds inaqueous medium - Carbon dioxide evolution test (ISO 9439:1999)


I.S. EN ISO 9454-2:2000977.

Soft soldering fluxes - Classification and requirements - Part 2: Performancerequirements (ISO 9454-2:1998)


I.S. EN ISO 9832:2000978.

Animal and vegetable fats and oils - Determination of residual technical hexane content(ISO 9832:1992, including Amendment 1: 1998)


I.S. EN ISO 9455-10:2000979.

Soft soldering fluxes - Test methods - Part 10: Flux efficacy test, solder spread method(ISO 9455-10:1998)


I.S. EN ISO 9873:2000980.

Dental hand instrument - Reusable mirrors and handles (ISO 9873:1998)


Date: 18/07/2018

I.S. EN 10028-1:2000981.

Flat products made of steels for pressure purposes - Part 1: General requirements


I.S. EN 10241:2000982.

Steel threaded pipe fittings


I.S. EN 10142:2000983.

Continuously hot-dip zinc coated low carbon steel strip and sheet for cold forming -Technical delivery conditions


I.S. EN 10147:2000984.

Continuously hot-dip zinc coated structural steel strip and sheet - Technical deliveryconditions


I.S. EN 10246-10:2000985.

Non-destructive testing of steel tubes - Part 10: Radiographic testing of the weld seamof automatic fusion arc welded steel tubes for the detection of imperfections


I.S. EN 10256:2000986.

Non-destructive testing of steel tubes - Qualification and competence of level 1 and 2non-destructive testing personnel


I.S. EN 10292:2000987.

Continuously hot-dip coated strip and sheet of steels with higher yield strength for coldforming - Technical delivery conditions


I.S. EN ISO 10695:2000988.

Water quality - Determination of selected organic nitrogen and phosphorus compounds -Gas chromatographic methods (ISO 10695:2000)


I.S. EN 12074:2000989.

Welding consumables - Quality requirements for manufacture, supply and distribution ofconsumables for welding and allied processes


I.S. EN 12269-1:2000990.

Determination of the bond behaviour between reinforcing steel and autoclaved aeratedconcrete by the “beam test” - Part 1: Short term test


I.S. EN 12350-7:2000991.

Testing fresh concrete - Part 7: Air content - Pressure methods


I.S. EN 12354-1:2000992.

Building Acoustics - Estimation of acoustic performance of buildings from theperformance of elements - Part 1: Airborne sound insulation between rooms


I.S. EN 12390-4:2000993.

Testing hardened concrete - Part 4: Compressive strength - Specification for testingmachines


Date: 18/07/2018

I.S. EN 12476:2000994.

Phosphate conversion coatings of metals - Method of specifying requirements


I.S. EN 12487:2000995.

Corrosion protection of metals - Rinsed and non-rinsed chromate conversion coatingson aluminium and aluminium alloys


I.S. EN 12518:2000996.

Chemicals used for treatment of water intended for human consumption - High-calciumlime


I.S. EN 12524:2000997.

Building materials and products - Hygrothermal properties - Tabulated design values


I.S. EN 12540:2000998.

Corrosion protection of metals - Electrodeposited coatings of nickel, nickel pluschromium, copper plus nickel and copper plus nickel plus chromium


I.S. EN 12546-1:2000999.

Materials and articles in contact with foodstuffs - Insulated containers for domestic use -Part 1: Specification for vacuum ware, insulated flasks and jugs


I.S. EN 12546-2:20001000.

Materials and articles in contact with foodstuffs - Insulated containers for domestic use -Part 2: Specification for insulated bags and boxes


I.S. EN 12546-3:20001001.

Materials and articles in contact with foodstuffs - Insulated containers for domestic use -Part 3: Specification for thermal packs


I.S. EN 12604:20001002.

Industrial, commercial and garage doors and gates - Mechanical aspects -Requirements


I.S. EN 12605:20001003.

Industrial, commercial and garage doors and gates - Mechanical aspects - Test Methods


I.S. EN 12668-1:20001004.

Non-destructive testing - Characterization and verification of ultrasonic examinationequipment - Part 1: Instruments


I.S. EN 12671:20001005.

Chemicals used for treatment of water intended for human consumption - Chlorinedioxide


I.S. EN 12678:20001006.

Chemicals used for treatment of water intended for human consumption - Potassiumperoxomonosulfate


Date: 18/07/2018

I.S. EN 12732:20001007.

Gas supply systems - Welding steel pipework - Functional requirements


I.S. EN ISO 12777-2:20001008.

Methods of test for pallet joints - Part 2: Determination of withdrawal and head pull-through resistance of pallet nails and staples (ISO 12777-2:2000)


I.S. EN 12876:20001009.

Chemicals used for treatment of water intended for human consumption - Oxygen


I.S. EN 12916:20001010.

Petroleum products - Determination of aromatic hydrocarbon types in middle distillates -High performance liquid chromatography method with refractive index detection


I.S. EN 12931:20001011.

Chemicals used for treatment of water intended for human consumption - Chemicals foremergency use - Sodium dichloroisocyanurate, anhydrous


I.S. EN 12932:20001012.

Chemicals used for treatment of water intended for human consumption - Chemicals foremergency use - Sodium dischloroisocyanurate, dihydrate


I.S. EN 12933:20001013.

Chemicals used for treatment of water intended for human consumption - Chemicals foremergency use - Trichloroisocyanuric acid


I.S. EN 12973:20001014.

Value management


I.S. EN 12983-1:20001015.

Cookware - Domestic cookware for use on top of a stove, cooker or hob - Part 1:General requirements


I.S. EN 13178:20001016.

Personal eye-protection - Eye protectors for snowmobile users


I.S. EN ISO 13694:20001017.

Optics and optical instruments - Lasers and laser-related equipment - Test methods forlaser beam power (energy) density distribution (ISO 13694:2000)


I.S. EN ISO 13844:20001018.

Plastics piping systems - Elastomeric-sealing-ring-type socket joints of unplasticizedpoly(vinyl chloride) (PVC-U) for use with PVC-U pipes - Test method for leaktightnessunder negative pressure (ISO 13844:2000)


I.S. EN ISO 13845:20001019.

Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use withunplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for leaktightness underinternal pressure and with angular deflection (ISO 13845:2000)


Date: 18/07/2018

I.S. EN ISO 14554-1:20001020.

Quality requirements for welding - Resistance welding of metallic materials - Part 1:Comprehensive quality requirements (ISO 14554-1:2000)


I.S. EN ISO 14554-2:20001021.

Quality requirements for welding - Resistance welding of metallic materials - Part 2:Elementary quality requirements (ISO 14554-2:2000)


I.S. EN ISO 14744-1:20001022.

Welding - Acceptance inspection of electron beam welding machines - Part 1: Principlesand acceptance conditions (ISO 14744-1:2000)


I.S. EN ISO 14744-2:20001023.

Welding - Acceptance inspection of electron beam welding machines - Part 2:Measurement of accelerating voltage characteristics (ISO 14744-2:2000)


I.S. EN ISO 14744-3:20001024.

Welding - Acceptance inspection of electron beam welding machines - Part 3:Measurement of beam current characteristics (ISO 14744-3:2000)


I.S. EN ISO 14744-4:20001025.

Welding - Acceptance inspection of electron beam welding machines - Part 4:Measurement of welding speed (ISO 14744-4:2000)


I.S. EN ISO 14744-5:20001026.

Welding - Acceptance inspection of electron beam welding machines - Part 5:Measurement of run-out accuracy (ISO 14744-5:2000)


I.S. EN ISO 14744-6:20001027.

Welding - Acceptance inspection of electron beam welding machines - Part 6:Measurement of stability of spot position (ISO 14744-6:2000)


I.S. EN ISO 15087-2:20001028.

Dental elevators - Part 2: Warwick James elevators (ISO 15087-2:2000)


I.S. EN 60244-15:20001029.

Methods of measurement for radio transmitters -- Part 15: Amplitude-modulatedtransmitters for sound broadcasting (IEC 60244-15:1999 (EQV))


I.S. EN 60249-2-1:1994/A4:20001030.

Base materials for printed circuits -- Part 2: Specifications - Specification No. 1: Phenoliccellulose paper copper-clad laminated sheet, high electrical quality (IEC 60249-2-1:1985/A4:2000 (EQV))


I.S. EN 60249-2-2:1994/A5:20001031.

Base materials for printed circuits -- Part 2: Specifications -- Specification No. 2:Phenolic cellulose paper copper-clad laminated sheet, economic quality (IEC 60249-2-2:1985/A5:2000 (EQV))


Date: 18/07/2018

I.S. EN 60249-2-3:1994/A4:20001032.

Base materials for printed circuits -- Part 2: Specifications -- Specification No. 3: Epoxidecellulose paper copper-clad laminated sheet of defined flammability (vertical burningtest) (IEC 60249-2-3:1987/A4:2000 (EQV))


I.S. EN 60249-2-4:1994/A5:20001033.

Base materials for printed circuits -- Part 2: Specifications -- Specification No. 4: Epoxidewoven glass fabric copper-clad laminated sheet, general purpose grade (IEC 60249-2-4:1987/A5:2000 (EQV))


I.S. EN 60601-2-38:1996/A1:20001034.

Medical electrical equipment -- Part 2-38: Particular requirements for the safety ofelectrically operated hospital beds (IEC 60601-2-38:1996/A1:1999 (EQV))


I.S. EN 61202-1:20001035.

Fibre optic isolators -- Part 1: Generic specification (IEC 61202-1:2000 (EQV))


I.S. EN 61300-3-36:20001036.

Fibre optic interconnecting devices and passive components - Basic test andmeasurement procedures -- Part 3-36: Examinations and measurements - Measurementmethods for the inside and outside diameters of fibre optic connector ferrules (IEC61300-3-36:2000 (EQV))


I.S. EN 61754-16:20001037.

Fibre optic connector interfaces -- Part 16: Type PN connector family (IEC 61754-16:1999 (EQV))


I.S. EN 61834-3:20001038.

Recording - Helical-scan digital video cassette recording system using 6,35 mmmagnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) -- Part3: HD format for 1125-60 and 1250-50 systems (IEC 61834-3:1999 (EQV))


I.S. EN 45510-2-3:20001039.

Guide for procurement of power station equipment -- Part 2-3: Electrical equipment -Stationary batteries and chargers


I.S. EN 45510-2-4:20001040.

Guide for procurement of power station equipment -- Part 2-4: Electrical equipment -High power static convertors


I.S. EN 45510-2-6:20001041.

Guide for procurement of power station equipment -- Part 2-6: Electrical equipment -Generators


I.S. EN 50244:20001042.

Electrical apparatus for the detection of combustible gases in domestic premises - Guideon the selection, installation, use and maintenance


Date: 18/07/2018

I.S. EN 60335-2-36:20001043.

Safety of household and similar electrical appliances -- Part 2-36: Particularrequirements for commercial electric cooking ranges, ovens, hobs and hob elements(IEC 60335-2-36:2000 (EQV))


I.S. EN 60335-2-37:20001044.

Safety of household and similar electrical appliances -- Part 2-37: Particularrequirements for commercial electric deep fat fryers (IEC 60335-2-37:2000 (EQV))


I.S. EN 60335-2-38:20001045.

Safety of household and similar electrical appliances -- Part 2-38: Particularrequirements for commercial electric griddles and griddle grills (IEC 60335-2-38:2000(EQV))


I.S. EN 60335-2-39:20001046.

Safety of household and similar electrical appliances -- Part 2-39: Particularrequirements for commercial electric multi-purpose cooking pans (IEC 60335-2-39:2000(EQV))


I.S. EN 60335-2-47:20001047.

Safety of household and similar electrical appliances -- Part 2-47: Particularrequirements for commercial electric boiling pans (IEC 60335-2-47:2000 (EQV))


I.S. EN 60335-2-42:20001048.

Safety of household and similar electrical appliances -- Part 2-42: Particularrequirements for commercial electric forced convection ovens, steam cookers andsteam-convection ovens (IEC 60335-2-42:2000 (EQV))


I.S. EN 60335-2-48:20001049.

Safety of household and similar electrical appliances -- Part 2-48: Particularrequirements for commercial electric grillers and toasters (IEC 60335-2-48:2000 (EQV))


I.S. EN 60335-2-49:20001050.

Safety of household and similar electrical appliances -- Part 2-49: Particularrequirements for commercial electric hot cupboards (IEC 60335-2-49:2000 (EQV))


I.S. EN 60335-2-50:20001051.

Safety of household and similar electrical appliances -- Part 2-50: Particularrequirements for commercial electric bains-marie (IEC 60335-2-50:2000 (EQV))


I.S. EN 60843-4:20001052.

Helical-scan video tape cassette system using 8 mm magnetic tape (8 mm video) -- Part4: Video subcode (VSC) (IEC 60843-4:2000 (EQV))


I.S. EN 60947-5-6:20001053.

Low-voltage switchgear and controlgear -- Part 5-6: Control circuit devices and switchingelements - DC interface for proximity sensors and switching amplifiers (NAMUR) (IEC60947-5-6:1999 (EQV))


Date: 18/07/2018

I.S. EN 61969-1:20001054.

Mechanical structures for electronic equipment - Outdoor enclosures -- Part 1: Designguidelines (IEC 61969-1:1999 (EQV))


I.S. EN 61969-2:20001055.

Mechanical structures for electronic equipment - Outdoor enclosures -- Part 2: Sectionalspecification - Coordination dimensions for cases and cabinets (IEC 61969-2:2000(EQV))


I.S. EN 61969-2-1:20001056.

Mechanical structures for electronic equipment - Outdoor enclosures -- Part 2-1: Detailspecification - Dimensions for cabinets (IEC 61969-2-1:2000 (EQV))


I.S. EN 61969-2-2:20001057.

Mechanical structures for electronic equipment - Outdoor enclosures -- Part 2-2: Detailspecification - Dimensions for cases (IEC 61969-2-2:2000 (EQV))


I.S. EN 60092-507:20001058.

Electrical installations in ships -- Part 507: Pleasure craft (IEC 60092-507:2000 (EQV))


I.S. EN 589:20001059.

Automotive fuels – LPG – Requirements and test methods


I.S. EN 840-5:1997/A1:20001060.

Mobile waste containers – Part 5: Performance requirements and test methods


I.S. EN 1023-2:20001061.

Office furniture – Screens – Part 2: Mechanical safety requirements


I.S. EN 1023-3:20001062.

Office furniture – Screens – Part 3: Test methods


I.S. EN 1280-1:1997/A1:20001063.

Agent specific filling systems for anaesthetic vaporizers – Part 1: Rectangular keyedfilling systems


I.S. EN 1730:20001064.

Domestic furniture - Tables - Test methods for determination of strength, durability andstability


I.S. EN 1946-5:20001065.

Thermal performance of building products and components – Scientific criteria for theassessment of laboratories measuring heat transfer properties – Part 5: Measurementsby pipe test methods


I.S. EN 1957:20001066.

Domestic furniture – Beds and mattresses – Test methods for the determination offunctional characteristics


Date: 18/07/2018

I.S. EN ISO 3098-2:20001067.

Technical product documentation – Lettering – Part 2: Latin alphabet, numeral andmarks (ISO 3098-2:2000)


I.S. EN ISO 3098-3:20001068.

Technical product documentation – Lettering – Part 3: Greek alphabet (ISO 3098-3:2000)


I.S. EN ISO 3098-4:20001069.

Technical product documentation – Lettering – Part 4: Diacritical and particular marksfor the Latin alphabet (ISO 3098-4:2000)


I.S. EN ISO 3098-6:20001070.

Technical product documentation – Lettering – Part 6: Cyrillic alphabet (ISO 3098-6:2000)


I.S. EN ISO 3262-10:20001071.

Extenders for paints – Specifications and methods of test – Part 10: Natural talc/chloritein lamellar form (ISO 3262-10:2000)


I.S. EN ISO 3262-11:20001072.

Extenders for paints – Specifications and methods of test – Part 11: Natural talc, inlamellar form, containing carbonates (ISO 3262-11:2000)


I.S. EN ISO 3262-15:20001073.

Extenders for paints – Specifications and methods of test – Part 15: Vitreous silica(ISO 3262-15:2000)


I.S. EN ISO 4759-3:20001074.

Tolerances for fasteners – Part 3: Plain washers for bolts, screws and nuts – Productgrades A and C (ISO 4759-3:2000)


I.S. EN ISO 4869-4:20001075.

Acoustics – Hearing protectors – Part 4: Measurement of effective sound pressurelevels for level-dependent sound-restoration ear-muffs (ISO/TR 4869-4:1998)


I.S. EN ISO 7029:20001076.

Acoustics – Statistical distribution of hearing thresholds as a function of age(ISO 7029:2000)


I.S. EN ISO 8249:20001077.

Welding – Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals (ISO 8249:200)


I.S. EN ISO 9974-1:20001078.

Connections for general use and fluid power – Ports and stud ends with ISO 261threads with elastomeric or metal-to-metal sealing – Part 1: Treaded ports (ISO 9974-1:1996)


Date: 18/07/2018

I.S. EN ISO 9337-1:20001079.

Contact lenses – Determination of back vertex power – Part 1: Method using focimeterwith manual focusing (ISO 9337-1:1999)


I.S. EN ISO 9974-2:20001080.

Connections for general use and fluid power – Ports and stud ends with ISO 261threads with elastomeric or metal-to-metal sealing – Part 2: Stud ends with elastomericsealing (type E) (ISO 9974-2:1996)


I.S. EN ISO 9974-3:20001081.

Connections for general use and fluid power – Ports and stud ends with ISO 261threads with elastomeric or metal-to-metal sealing – Part 3: Stud ends with metal-to-metal sealing (type B) (ISO 9974-3:1996)


I.S. EN 10276-1:20001082.

Chemical analysis of ferrous materials – Determination of oxygen in steel and iron – Part1: Sampling and preparation of steel samples for oxygen determination


I.S. EN ISO 10477:1996/A1:20001083.

Dentistry - Polymer based crown and bridge materials (ISO 10477 : 1992)


I.S. EN ISO 11469:20001084.

Plastics – Generic identification and marking of plastics products (ISO 11469:2000)


I.S. EN ISO 11986:20001085.

Ophthalmic optics – Contact lenses and contact lens care products – Guidelines for thedetermination of preservative uptake and release (ISO 11986:1999)


I.S. EN 12104:20001086.

Resilient floor coverings – Cork floor tiles – Specification


I.S. EN 12164:1998/A1:20001087.

Copper and copper alloys - Rod for free machining purposes


I.S. EN 12168:1998/A1:20001088.

Copper and copper alloys - Hollow rod for free machining purposes


I.S. EN 12198-1:20001089.

Safety of Machinery – Assessment and reduction of risks arising from radiation emittedby Machinery – Part 1: General principles


I.S. EN 12259-3:20001090.

Fixed firefighting systems – Components for sprinkler and water spray systems – Part 3:Dry alarm valve assemblies


I.S. EN 12286:1998/A1:20001091.

In vitro diagnostic medical devices - Measurement of quantities in smaples of biologicalorigin - Presentation of reference measurement procedures


Date: 18/07/2018

I.S. EN 12396-3:20001092.

Non-fatty foods – Determination of dithiocarbamate and thiuram disulfide residues – Part3: UV spectrometric xanthogenate method


I.S. EN 12407:20001093.

Natural stone test methods – Petrographic examination


I.S. EN 12418:20001094.

Masonry and stone cutting-off machines for job site – Safety


I.S. EN 12469:20001095.

Biotechnology – Performance criteria for microbiological safety cabinets


I.S. EN 12484-2:20001096.

Irrigation techniques – Automatic turf irrigation systems – Part 2: Design and definition oftypical technical templates


I.S. EN 12484-3:20001097.

Irrigation techniques – Automatic turf irrigation systems – Part 3: Automatic control andsystem management


I.S. EN 12570:20001098.

Industrial valves – Method for sizing the operating element


I.S. 265:20001099.

Installation of Gas Service Pipes - Parts 1 and 2 (Fourth Edition)

19 DECEMBER 2000Date published

I.S. EN 12723:20001100.

Liquid pumps – General terms for pumps and installations – Definitions, quantities, lettersymbols and units

1 SEPTEMBER 2000Date published

I.S. EN ISO 15087-4:20001101.

Dental elevators – Part 4: Coupland elevators (ISO 15087-4:2000)


I.S. EN ISO 14556:20001102.

Steel – Charpy V-notch pendulum impact test – Instrumented test method (ISO14556:2000)


I.S. EN ISO 13943:20001103.

Fire safety – Vocabulary (ISO 13943:1999)


I.S. EN ISO 13706:20001104.

Petroleum and natural gas industries – Air cooled heat exchangers (ISO 13706:1998)


I.S. EN ISO 13565-3:20001105.

Geometrical Product Specifications (GPS) – Surface texture: Profile method: Surfaceshaving stratified functional properties – Part 3: Height characterization using the materialprobability curve (ISO 13565-3:1998)


Date: 18/07/2018

I.S. EN 13275:20001106.

Cryogenic vessels – Pumps for cryogenic service


I.S. EN 13202:20001107.

Ergonomics of the thermal environment – Temperatures of touchable hot surfaces –Guidance for establishing surface temperature limit values in production standards withthe aid of EN 563


I.S. EN 13193:20001108.

Packaging – Packaging and the environment – Terminology


I.S. EN 13191-2:20001109.

Non-fatty food – Determination of bromide residues – Part 2: Determination of inorganicbromide


I.S. EN 13191-1:20001110.

Non-fatty food – Determination of bromide residues – Part 1: Determination of totalbromide as inorganic bromide


I.S. EN 13117-2:20001111.

Transport packaging – Reusable, rigid plastics distribution boxes – Part 2 : Generalspecifications for testing


I.S. EN 13117-1:20001112.

Transport packaging – Reusable, rigid plastics distribution boxes – Part 1: Generalpurpose application


I.S. EN 12928:20001113.

Inserted flange type closure systems for steel drums with a total capacity of 17 L to230 L


I.S. EN 12862:20001114.

Transportable gas cylinders – Specification for the design and construction of refillabletransportable welded aluminium alloy gas cylinders


I.S. EN 12734:20001115.

Irrigation techniques – Quick coupling pipes for movable irrigation supply – Technicalcharacteristics and testing


I.S. EN 12726:20001116.

Packaging – Cork mouth finish with a bore diameter of 18,5mm for corks and tamperevident capsules


I.S. EN ISO 15087-5:20001117.

Dental elevators – Part 5: Bien elevators (ISO 15087-5:2000)


I.S. EN ISO 15087-6:20001118.

Dental elevators – Part 6: Flohr elevators


Date: 18/07/2018

I.S. EN ISO 15667:20001119.

Acoustics – Guidelines for noise control by enclosures and cabins (ISO 15667:2000)


I.S. EN 60244-1:20001120.

Methods of measurement for radio transmitters -- Part 1: General characteristics forbroadcast transmitters (IEC 60244-1:1999 (EQV))


I.S. EN 60368-1:20001121.

Piezoelectric filters of assessed quality -- Part 1: Generic specification (IEC 60368-1:2000 (EQV))


I.S. EN 60519-4:1997/A1:20001122.

Safety in electroheat installations -- Part 4: Particular requirements for arc furnaceinstallations (IEC 60519-4:1995/A1:2000 (EQV))


I.S. EN 60947-4-2:20001123.

Low-voltage switchgear and controlgear -- Part 4-2: Contactors and motor-starters - ACsemiconductor motor controllers and starters (IEC 60947-4-2:1999 (EQV))


I.S. EN 60974-1:1998/A1:20001124.

Arc welding equipment -- Part 1: Welding power sources (IEC 60974-1:1998/A1:2000(EQV))


I.S. EN 60264-3-1:20001125.

Packaging of winding wires -- Part 3-1: Taper barrelled delivery spools - Basicdimensions (IEC 60264-3-1:1999 (EQV))


I.S. EN 60317-0-1:1998/A1:20001126.

Specifications for particular types of winding wires -- Part 0-1: General requirements -Enamelled round copper wire (IEC 60317-0-1:1997/A1:1999 (EQV))


I.S. EN 60335-2-34:20001127.

Safety of household and similar electrical appliances -- Part 2-34: Particularrequirements for motor-compressors (IEC 60335-2-34:1999 (EQV))


I.S. EN 60534-3-1:20001128.

Industrial-process control valves -- Part 3-1: Dimensions - Face-to-face dimensions forflanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged,two-way, globe-type, angle pattern control valves (IEC 60534-3-1:2000 (EQV))


I.S. EN 60580:20001129.

Medical electrical equipment - Dose area product meters (IEC 60580:2000 (EQV))


I.S. EN 60601-2-30:20001130.

Medical electrical equipment -- Part 2-30: Particular requirements for the safety,including essential performance, of automatic cycling non-invasive blood pressuremonitoring equipment (IEC 60601-2-30:1999 (EQV))


Date: 18/07/2018

I.S. EN 60974-7:20001131.

Arc welding equipment -- Part 7: Torches (IEC 60974-7:2000 (EQV))


I.S. EN 61754-12:20001132.

Fibre optic connector interfaces -- Part 12: Type FS connector family (IEC 61754-12:1999 (EQV))


I.S. EN 61993-1:20001133.

Maritime navigation and radiocommunication equipment and systems -- Part 1:Shipborne automatic transponder system installation using VHF digital selective calling(DSC) techniques - Operational and performance requirements, methods of testing andrequired test results (IEC 61993-1:1999 (EQV))


I.S. EN 62037:20001134.

RF connectors, connector cable assemblies and cables - Intermodulation levelmeasurement (IEC 62037:1999 (EQV))


I.S. 328:20001135.

Code of Practice for Gas Transmission Pipelines and Pipeline Installations


I.S. EN 326-2:20001136.

Wood-based panels - Sampling, cutting and inspection - Part 2: Quality control in thefactory

27 OCTOBER 2000Date published

I.S. EN 327:20001137.

Heat exchangers - Forced convection air cooled refrigerant condensors - Test procedurefor establishing performance


I.S. EN 378-1:20001138.

Refrigerating systems and heat pumps - Safety and environmental requirements -Part 1: Basic requirements, definitions, classification and selection criteria


I.S. EN 614-2:20001139.

Safety of machinery - Ergonomic design principles - Part 2: Interactions between thedesign of machinery and work tasks


I.S. EN 681-2:20001140.

Elastomeric Seals - Materials requirements for pipe joint seals used in water anddrainage applications - Part 2: Thermoplastic elastomers


I.S. EN 681-3:20001141.

Elastomeric seals - Materials requirements for pipe joints seals used in water anddrainage applications - Part 3: Cellular materials of vulcanized rubber


I.S. EN 681-4:20001142.

Elastomeric seals - Materials requirements for pipe joint seals used in water anddrainage applications - Part 4: Cast polyurethane sealing element


Date: 18/07/2018

I.S. EN 772-1:20001143.

Methods of test for masonry units - Part 1: Determination of compressive strength


I.S. EN 772-13:20001144.

Methods of test for masonry units - Part 13: Determination of net and gross dry densityof masonry units (except for natural stone)


I.S. EN 772-16:20001145.

Methods of test for masonry units - Part 16: Determination of dimensions


I.S. EN 792-1:20001146.

Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power toolsfor non-threaded mechanical fasteners


I.S. EN 792-2:20001147.

Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off andcrimping power tools


I.S. EN 792-3:20001148.

Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers


I.S. EN 792-4:20001149.

Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotarypercussive power tools


I.S. EN 792-6:20001150.

Hand-held non-electric power tools - Safety requirements -Part 6: Assembly power tools for threaded fasteners


I.S. EN 792-5:20001151.

Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussivedrills


I.S. EN 792-10:20001152.

Hand-held non-electric power tools - Safety requirements - Part 10: Compression powertools


I.S. EN 792-11:20001153.

Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears


I.S. EN 792-12:20001154.

Hand-held non-electric power tools - Safety requirements - Part 12: Small circular, smalloscillating and reciprocating saws


I.S. EN 792-13:20001155.

Hand-held non-electric power tools - Safety requirements - Part 13: Fastener drivingtools


Date: 18/07/2018

I.S. EN 848-1:1998/A1:20001156.

Safety of woodworking machines - One side moulding machines with rotating tool -Part 1: Single spindle vertical moulding machines


I.S. EN ISO 887:20001157.

Plain washers for metric bolts, screws and nuts for general purposes - General plan(ISO 887:2000)


I.S. EN 927-3:20001158.

Paints and varnishes - Coating materials and coating systems for exterior wood -Part 3: Natural weathering test


I.S. EN 927-4:20001159.

Paints and varnishes - Coating materials and coating systems for exterior wood -Part 4: Assessment of the water-vapour permeability


I.S. EN 927-5:20001160.

Paints and varnishes - Coating materials and coating systems for exterior wood -Part 5: Assessment of the liquid water permeability


I.S. EN 1027:20001161.

Windows and doors - Watertightness - Test method


I.S. EN 1069-1:20001162.

Water slides of 2 m height and more - Part 1: Safety requirements and test methods


I.S. EN 1074-4:20001163.

Valves for water supply - Fitness for purpose requirements and appropriate verificationtests - Part 4: Air valves


I.S. EN 1288-2:20001164.

Glass in building - Determination of the bending strength of glass - Part 2: Coaxialdouble ring test on flat specimens with large test surface areas


I.S. EN 1288-3:20001165.

Glass in building - Determination of the bending strength of glass - Part 3: Test withspecimen supported at two points(four point bending)


I.S. EN 1288-4:20001166.

Glass in building - Determination of the bending strength of glass - Part 4: Testing ofchannel shaped glass


I.S. EN 1288-5:20001167.

Glass in building - Determination of the bending strength of glass - Part 5: Coaxialdouble ring test on flat specimens with small test surface areas


I.S. EN 1374:20001168.

Agricultural machinery - Silos stationary unloaders for round silos - Safety


Date: 18/07/2018

I.S. EN 1337-1:20001169.

Structural bearings - Part 1: General design rules


I.S. EN 1492-2:20001170.

Textile slings - Safety - Part 2: Roundslings, made of man-made fibres, for generalpurpose use


I.S. EN 1612-2:20001171.

Rubber and plastics machines - Reaction moulding machines - Part 2: Safetyrequirements for reaction moulding plant


I.S. EN 1708-2:20001172.

Welding - Basic weld joint details in steel - Part 2: Non internal pressurised components


I.S. EN 1870-9:20001173.

Safety of woodworking machines - Circular sawing machines - Part 9: Double bladecircular sawing machines for cross-cutting with integrated feed and with manual loadingand/or unloading.


I.S. EN ISO 1872-2:1997/A1:20001174.

Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation oftest specimens and determination of properties - Amendment 1 (ISO 1872-2:1997/AM 1:2000)


I.S. EN 1877-1:20001175.

Products and systems for the protection and repair of concrete structures - Testmethods - Reactive functions related to epoxy resins - Part 1: Determination of epoxyequivalent


I.S. EN 1877-2:20001176.

Products and systems for the protection and repair of concrete structures - Testmethods - Reactive functions related to epoxy resins - Part 2: Determination of aminefunctions using the total basicity number


I.S. EN 1919:20001177.

Transportable gas cylinders - Cylinders for liquefied gases (excluding acetylene andLPG) - Inspection at time of filling


I.S. EN 1920:20001178.

Transportable gas cylinders - Cylinders for compressed gases (excluding acetylene) -inspection at time of filling


I.S. EN 1931:20001179.

Flexible sheets for waterproofing - Bitumen and rubber sheets for roof waterproofing -Determination of water vapour transmission properties


I.S. EN ISO 3146:20001180.

Plastics - Determination of melting behaviour (melting temperature or melting range) ofsemi-crystalline polymers by capillary tube and polarizing-microscope methods(ISO 3146:2000)


Date: 18/07/2018

I.S. EN ISO 3269:20001181.

Fasteners - Acceptance inspection (ISO 3269:2000)


I.S. EN ISO 3747:20001182.

Acoustics - Determination of sound power levels of noise sources using sound pressure- Comparison method for use in situ (ISO 3747:2000)


I.S. EN ISO 3767-1:20001183.

Tractors, machinery for agriculture and forestry, powered lawn and garden equipment -Symbols for operator controls and other displays - Part 1: Common symbols (ISO 3767-1:1998)


I.S. EN ISO 3767-2:1995/A2:20001184.

Tractors, machinery for agriculture and forestry, powered lawn and garden equipment -Symbols for operator controls and other displays - Part 2: Symbols for agriculturaltractors and machinery (ISO 3767-2:1991, Amendment 2:1998)


I.S. EN ISO 5267-1:20001185.

Pulps - Determination of drainability - Part 1: Schopper-Riegler method (ISO 5267-1:1999)


I.S. EN ISO 5269-1:20001186.

Pulps - Preparation of laboratory sheets for physical testing - Part 1: Conventionalsheet-former method (ISO 5269-1:1998)


I.S. EN ISO 5269-2:20001187.

Pulps - Preparation of laboratory sheets for physical testing - Part 2: Rapid-Köthenmethod (ISO 5269-2:1998)


I.S. EN ISO 7089:20001188.

Plain washers - Normal series - Product grade A (ISO 7089:2000)


I.S. EN ISO 7090:20001189.

Plain washers, chamfered - Normal series - Product grade A (ISO 7090:2000)


I.S. EN ISO 7091:20001190.

Plain washers - Normal series - Product grade C (ISO 7091:2000)


I.S. EN ISO 7092:20001191.

Plain washers - Small series - Product grade A (ISO 7092:2000)


I.S. EN ISO 7093-1:20001192.

Plain washers - Large series - Part 1: Product grade A (ISO 7093-1:2000)


I.S. EN ISO 7094:20001193.

Plain washers - Extra large series - Product grade C (ISO 7094:2000)


Date: 18/07/2018

I.S. EN ISO 8980-4:20001194.

Ophthalmic optics - Uncut finished spectacle lenses - Part 4: Specifications and testmethods for anti-reflection coatings (ISO 8980-4:2000)


I.S. EN ISO 9653:20001195.

Adhesives - Test method for shear impact strength of adhesive bonds (ISO 9653:1998)


I.S. EN ISO 9665:20001196.

Adhesives - Animal glues - Methods for sampling and testing (ISO 9665:1998)


I.S. EN ISO 11151-1:20001197.

Lasers and laser-related equipment - Standard optical components -Part 1: Components for the UV, visible and near-infrared spectral ranges (ISO 11151-1:2000)


I.S. EN ISO 11151-2:20001198.

Lasers and laser-related equipment - Standard optical components -Part 2: Components for the infrared spectral range (ISO 11151-2:2000)


I.S. EN ISO 11245:20001199.

Dental restorations - Phosphate-bonded refractory die materials (ISO 11245:1999)


I.S. EN 12013:20001200.

Rubber and plastics machines - Internal mixers - Safety requirements


I.S. EN 12045:20001201.

Shutters and blinds power operated - Safety in use - Measurement of the transmittedforce


I.S. EN 12056-1:20001202.

Gravity drainage systems inside buildings -Part 1: General and performance requirements


I.S. EN 12056-2:20001203.

Gravity drainage systems inside buildings -Part 2: Sanitary pipework, layout and calculation


I.S. EN 12056-3:20001204.

Gravity drainage systems inside buildings -Part 3: Roof drainage, layout and calculation


I.S. EN 12056-4:20001205.

Gravity drainage systems inside buildings - Part 4: Wastewater lifting plants - Layoutand calculation


I.S. EN 12056-5:20001206.

Gravity drainage systems inside buildings -Part 5: Installation and testing, instructions for operating, maintenance and use


Date: 18/07/2018

I.S. EN 12150-1:20001207.

Glass in building - Thermally toughened soda lime silicate safety glass - Part 1:Definition and description


I.S. EN 12153:20001208.

Curtain walling - Air permeability - Test method


I.S. EN 12155:20001209.

Curtain walling - Watertightness - Laboratory test under static pressure


I.S. EN 12179:20001210.

Curtain walling - Resistance to wind load - Test Method


I.S. EN 12211:20001211.

Windows and doors - Resistance to wind load - Test method


I.S. EN 12302:20001212.

Crude tar and crude benzole - Terminology


I.S. EN 12337-1:20001213.

Glass in building - Chemically strengthened soda lime silicate glass - Part 1: Definitionand description


I.S. EN 12348:20001214.

Core drilling machines on stand - Safety


I.S. EN 12467:20001215.

Fibre-cement flat sheets - Product specifications and test methods


I.S. EN 12500:20001216.

Protection of metallic materials against corrosion - Corrosion likelihood in atmosphericenvironment -Classification, determination and estimation of corrosivity of atmosphericenvironments


I.S. EN 12625-7:20001217.

Tissue paper and tissue products - Part 7: Determination of optical properties


I.S. EN 12629-1:20001218.

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 1: Common requirements


I.S. EN 12640:20001219.

Securing of cargo on road vehicles - Lashing points on commercial vehicles for goodstransportation - Minimum requirements and testing


I.S. EN 12669:20001220.

Direct gas-fired hot air blowers for use in greenhouses and supplementary non-domesticspace heating


Date: 18/07/2018

I.S. EN 12715:20001221.

Execution of special geotechnical work - Grouting


I.S. EN 12799:20001222.

Brazing - Non-destructive examination of brazed joints


I.S. EN 12814-5:20001223.

Testing of welded joints of thermoplastics semi-finished products - Part 5: Macroscopicexamination


I.S. EN 12883:20001224.

Founding - Equipment for the production of lost patterns for the lost wax casting process


I.S. EN 12895:20001225.

Industrial trucks - Electromagnetic compatibility


I.S. EN 12947:20001226.

Liming materials - Determination of magnesium content - Atomic absorptionspectrometric method


I.S. EN 13044:20001227.

Swap bodies - Coding, identification and marking


I.S. EN 13045:20001228.

Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances


I.S. EN 13046:20001229.

Packaging - Flexible cylindrical metallic tubes - Dimensions and tolerances


I.S. EN 13047:20001230.

Packaging - Flexible conical metallic tubes - Dimensions and tolerances


I.S. EN 13048:20001231.

Packaging - Flexible aluminium tubes - Internal lacquer film thickness measurementmethod


I.S. EN 13086:20001232.

Lead and lead alloys - Lead oxides


I.S. EN 13087-7:20001233.

Protective helmets - Test methods - Part 7: Flame resistance


I.S. EN 13199-1:20001234.

Packaging - Small Load Carrier Systems - Part 1: Common requirements and testmethods


I.S. EN 13199-2:20001235.

Packaging - Small Load Carrier Systems - Part 2: Column Stackable System (CSS)


Date: 18/07/2018

I.S. EN 13199-3:20001236.

Packaging - Small Load Carrier Systems - Part 3: Bond Stackable System


I.S. EN 13281:20001237.

Inland navigation vessels - Safety requirements for walkways and working places


I.S. EN 13309:20001238.

Construction machinery - Electromagnetic compatibility of machines with internalelectrical power supply


I.S. EN 13318:20001239.

Screed material and floor screeds - Definitions


I.S. EN 13329:20001240.

Laminate floor coverings - Specifications, requirements and test methods


I.S. EN 13503-3:20001241.

Ophthalmic implants - Intraocular lenses - Part 3: Mechanical properties and testmethods (ISO 11979-3:1999)


I.S. EN 144-1:20001242.

Respiratory protective devices - Gas cylinder valves -Part 1: Thread connections for insert connector

2 NOVEMBER 2000Date published

I.S. EN ISO 734-1:20001243.

Oilseed residues - Determination of oil content - Part 1: Extraction method with hexane(or light petroleum) (ISO 734-1:1998)


I.S. EN ISO 734-2:20001244.

Oilseed residues - Determination of oil content - Part 2: Rapid extraction method(ISo 734-2:1998)


I.S. EN 771-6:20001245.

Specification for masonry units - Part 6: Natural stone masonry units


I.S. EN 962:1996/A2:20001246.

Transportable gas cylinders - Valve protection caps and valve guards for industrial andmedical gas cylinders - Design, construction and tests


I.S. EN 1026:20001247.

Windows and doors - Air permeability - Test method


I.S. EN 1653:1997/A1:20001248.

Copper and copper alloys - Plate, sheet and circles for boilers, pressure vessels and hotwater storage units


I.S. EN 1677-1:20001249.

Components for slings - Safety - Part 1: Forged steel components, Grade B


Date: 18/07/2018

I.S. EN 1677-2:20001250.

Components for slings - Safety - Part 2: Forged steel lifting hooks with latch, Grade 8


I.S. EN 1775:1998/A1:20001251.

Gas supply - Gas pipework for buildings - Maximum operating pressure up to andincluding 5 bar - Functional recommendations


I.S. EN 1930:20001252.

Child care articles - Safety barriers - Safety requirements and test method


I.S. EN ISO 2114:20001253.

Plastics (polyester resins) and paints and varnishes (binders) - Determination of partialacid value and total acid value (ISO 2114:2000)


I.S. EN ISO 3596-2:20001254.

Animal and vegetable fats and oils - Determination of unsaponifiable matter - Part 2:Rapid method using hexane extraction (ISO 3596-2:1988, including Amendment 1:1999)


I.S. EN ISO 4049:20001255.

Dentistry - Polymer-based filling, restorative and luting materials (ISO 4049:2000)


I.S. EN ISO 8502-9:20001256.

Preparation of steel substrates before application of paints and related products - Testsfor the assessment of surface cleanliness - Part 9: Field method for the conductometricdetermination of water-soluble salts (ISO 8502-9:1998)


I.S. EN ISO 10519:20001257.

Rapeseed - Determination of chlorophyll content - Spectrometric method(ISO 10519:1997)


I.S. EN ISO 12163:20001258.

Dental baseplate/modelling wax (ISO 12163:1999)


I.S. EN 12252:20001259.

Equipping of Liquefied Petroleum Gas (LPG) road tankers


I.S. EN 12301:20001260.

Rubber and plastics machines - Calenders - Safety requirements


I.S. EN 12424:20001261.

Industrial, commercial and garage doors and gates - Resistance to wind load -Classification


I.S. EN 12426:20001262.

Industrial, commercial and garage doors and gates - Air permeability - Classification


I.S. EN 12434:20001263.

Cryogenic vessels - Cryogenic flexible hoses


Date: 18/07/2018

I.S. EN 12425:20001264.

Industrial, commercial and garage doors and gates - Resistance to water penetration -Classification


I.S. EN 12427:20001265.

Industrial, commercial and garage doors and gates - Air permeability - Test method


I.S. EN 12428:20001266.

Industrial, commercial and garage doors and gates - Thermal transmittance -Requirements for the calculation


I.S. EN 12489:20001267.

Industrial, commercial and garage doors and gates - Resistance to water penetration -Test method


I.S. EN 12505:20001268.

Food processing machinery - Centrifugal machines for processing edible oils and fats -Safety and hygiene requirements


I.S. EN 12583:20001269.

Gas supply systems - Compressor stations - Functional requirements


I.S. EN 12663:20001270.

Railway applications - Structural requirements of railway vehicle bodies


I.S. EN 12672:20001271.

Chemicals used for treatment of water intended for human consumption - Potassiumpermanganate


I.S. EN 12879:20001272.

Characterization of sludges - Determination of the loss on ignition of dry mass


I.S. EN 12880:20001273.

Characterization of sludges - Determination of dry residue and water content


I.S. EN 12926:20001274.

Chemicals used for treatment of water intended for human consumption - Sodiumperoxodisulfate


I.S. EN 13087-5:20001275.

Protective helmets - Test methods - Part 5: Retention system strength


I.S. EN 13133:20001276.

Brazing - Brazer approval.


I.S. EN 13134:20001277.

Brazing - Procedure approval


Date: 18/07/2018 Page

I.S. EN 13176:20001278.

Chemicals used for treatment of water intended for human consumption - Ethanol


I.S. EN 13179-1:20001279.

Tests for filler aggregate used in bituminous mixtures - Part 1: Delta ring and ball test


I.S. EN 13188:20001280.

Vinegar - Product made from liquids of agricultural origin - Definitions, requirements,marking


I.S. EN 13189:20001281.

Acetic acid food grade - Product made from materials of non-agricultural origin -Definitions, requirements, marking


I.S. EN 13194:20001282.

Chemicals used for treatment of water intended for human consumption - Acetic acid


I.S. EN 13277-1:20001283.

Protective equipment for martial arts - Part 1: General requirements and test methods


I.S. EN 13277-2:20001284.

Protective equipment for martial arts - Part 2: Additional requirements and test methodsfor instep protectors, shin protectors and forearm protectors


I.S. EN 13277-3:20001285.

Protective equipment for martial arts - Part 3: Additional requirements and test methodsfor trunk protectors


I.S. EN 13297:20001286.

Textile floor coverings - Classification of needled pile floor coverings


I.S. EN 13342:20001287.

Characterization of sludges - Determination of Kjeldahl nitrogen


I.S. EN 13346:20001288.

Characterization of sludges - Determination of trace elements and phosphorus - Aquaregia extraction methods


I.S. EN 13611:20001289.

Safety and control devices for gas burners and gas-burning appliances - Generalrequirements


I.S. EN ISO 15528:20001290.

Paints, varnishes and raw materials for paints and varnishes - Sampling (ISO15528:2000)


Date: 18/07/2018 Page

I.S. EN ISO 8434-4:20001291.

Metallic tube connections for fluid power and general use Part 4: 24° cone connectorswith O-ring weld-on nipples (ISO 8434-4:1995)


I.S. EN ISO 15087-3:20001292.

Dental elevatorsPart 3: Cryer elevators (ISO 15087-3:2000)


I.S. EN 61000-3-2:1995/A14:20001293.

Electromagnetic compatibility (EMC) -- Part 3-2: Limits - Limits for harmonic currentemissions (equipment input current up to and including 16 A per phase)


I.S. EN ISO 8381:20001294.

Milk-based infant foods - Determination of fat content - Gravimetric method (Referencemethod) (ISO 8381:2000)


I.S. EN 26:1997/A1:20001295.

Gas-fired instantaneous water heaters for the production of domestic hot water, fittedwith atmospheric burners


I.S. EN ISO 182-3:20001296.

Plastics - Determination of the tendency of compounds and products based on vinylchloride homopolymers and copolymers to evolve hydrogen chloride and any otheracidic products at elevated temperatures - Part 3: Conductometric method(ISO 182-3:1993)


I.S. EN ISO 182-4:20001297.

Plastics - Determination of the tendency of compounds and products based on vinylchloride homopolymers and copolymers to evolve hydrogen chloride and any otheracidic products at elevated temperatures - Part 4: Potentiometric method (ISO 182-4:1993)


I.S. EN 334:1999/A1:20001298.

Gas pressure regulators for inlet pressures up to 100 bar


I.S. EN 506:20001299.

Roofing products from metal sheet - Specification for self-supporting products of copperor zinc sheet


I.S. EN 508-1:20001300.

Roofing products from metal sheet - Specification for self-supporting products for steel,aluminium or stainless steel sheet -Part 1: Steel


I.S. EN 508-2:20001301.

Roofing products from metal sheet - Specification for self-supporting products of steel,aluminium or stainless steel sheet -Part 2: Aluminium


Date: 18/07/2018 Page

I.S. EN 508-3:20001302.

Roofing products from metal sheet - Specification for self-supporting products of steel,aluminium or stainless steel sheet - Part 3: Stainless steel


I.S. EN ISO 591-1:20001303.

Titanium dioxide pigments for paints - Part 1: Specifications and methods of test (ISO591-1:2000)


I.S. EN 624:20001304.

Specification for dedicated LPG appliances - Room sealed LPG space heatingequipment for installation in vehicles and boats


I.S. EN 646:20001305.

Paper and board intended to come into contact with foodstuffs - Determination of colourfastness of dyed paper and board


I.S. EN ISO 665:20001306.

Oilseeds - Determination of moisture and volatile matter content (ISO 665:2000)


I.S. EN 746-5:20001307.

Industrial thermoprocessing equipment - Part 5: Particular safety requirements for saltbath thermoprocessing equipment


I.S. EN 746-8:20001308.

Industrial thermoprocessing equipment - Part 8: Particular safety requirements forquenching equipment


I.S. EN 806-1:20001309.

Specifications for installations inside buildings conveying water for human consumptionPart 1 : General


I.S. EN 840-6:1997/A1:20001310.

Mobile waste containersPart 6: Safety and health requirements


I.S. EN 920:20001311.

Paper and board intended to come into contact with foodstuffsDetermination of dry matter content in an aqueous extract


I.S. EN 1011-3:20001312.

Welding - Recommendations for welding of metallic materialsPart 3: Arc welding of stainless steels


I.S. EN 1011-4:20001313.

Welding - Recommendations for welding of metallic materialsPart 4: Arc welding of aluminium and aluminium alloys


Date: 18/07/2018 Page

I.S. EN 1097-6:20001314.

Tests for mechanical and physical properties of aggregates- Part 6: Determination of particle density and water absorption


I.S. EN 1197:20001315.

Chemicals used for treatment of water intended for human consumption- Monozinc phosphate solution


I.S. EN 1270:1998/A1:20001316.

Playing field equipment - Basketball equipmentFunctional and safety requirements,

test methods


I.S. EN 1271:1998/A1:20001317.

Playing field equipment - Volleyball equipmentFunctional and safety requirements

Test methods


I.S. EN 1673:20001318.

Food processing machinery - Rotary rack ovens Safety and hygiene requirements


I.S. EN 1674:20001319.

Food processing machinery - Dough and pastry brakes - Safety and hygienerequirements


I.S. EN 1726-2:20001320.

Safety of industrial trucks - Self-propelled trucks up to and including 10 000 kg capacityand tractors with a drawbar pull up to and including 20 000 N- Part 2: Additional requirements for trucks with elevating operator position and trucksspecifically designed to travel with elevated loads


I.S. EN 1822-4:20001321.

High efficiency particulate air filters(HEPA and ULPA)Part 4: Determining leakage of filter element(Scan method)


I.S. EN 1822-5:20001322.

High efficiency particulate air filters(HEPA and ULPA)Part 5: Determining the efficiency of filter element


I.S. EN ISO 1874-1:20001323.

Plastics - Polyamide (PA) moulding and extrusion materials - Part 1: Designation(ISO 1874-1:1992)


I.S. EN 1904:20001324.

Precious metals - The finenesses of solders used with precious metal jewellery alloys


Date: 18/07/2018 Page

I.S. EN ISO 2439:20001325.

Flexible cellular polymeric materials - Determination of hardness (indentation technique)ISO 2439:1997 Including Technical Corrigendum 1 : 1998


I.S. EN ISO 2556:20001326.

Plastics - Determination of the gas transmission rate of films and thin sheets undEratmospheric pressureManometric method

(ISO 2556:1974)


I.S. EN ISO 3451-4:20001327.

Plastics - Determination of ashPart 4: Polyamides (ISO 3451-4:1998)


I.S. EN ISO 6885:20001328.

Animal and vegetable fats and oils - Determination of anisidine value(ISO 6885:1998)


I.S. EN ISO 7214:20001329.

Cellular plastics - PolyethyleneMethods of test(ISO 7214:1998)


I.S. EN ISO 7491:20001330.

Dental materials - Determination of colour stability(ISO 7491:2000)


I.S. EN ISO 7823-1:20001331.

Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristicsPart 1: Cast sheets (ISO 7823-1:1998)


I.S. EN ISO 8028:20001332.

Rubber and/or plastics hoses and hose assemblies for airless paintspraying - Specification(ISO 8028:1999)


I.S. EN ISO 9308-1:20001333.

Water quality - Detection and enumeration of Escherichia coli and coliform bacteriaPart 1: Membrane filtration method

(ISO 9308-1:2000)


I.S. EN ISO 9396:20001334.

Plastics - Phenolic resins - Determination of the gel time at a given temperature usingautomatic apparatus(ISO 9396:1997)


I.S. EN ISO 9693:20001335.

Metal-ceramic dental restorative systems (ISO 9693:1999)


Date: 18/07/2018 Page

I.S. EN ISO 10239:20001336.

Small craft - Liquefied petroleum gas (LPG) systems (ISO 10239:2000)


I.S. EN ISO 10350-1:20001337.

Plastics - Acquisition and presentation of comparable single-point dataPart 1: Moulding materials(ISO 10350-1:1998)


I.S. EN ISO 10993-8:20001338.

Biological evaluation of medical devicesPart 8: Selection and qualification of reference materials for biological tests(ISO 10993-8:2000)


I.S. EN ISO 11680-1:20001339.

achinery for forestrySafety requirements and testing for pole-mounted powered prunersPart 1: Units fitted with an integral combustion engine (ISO 11680-1:2000)


I.S. EN 11680-2:20001340.

Machinery for forestry -Safety requirements and testing for pole-mounted powered pruners -Part 2: Units for use with a backpack power source(ISO 11680-2:2000)


I.S. EN 12041:20001341.

Food processing machineryMoulders - Safety and hygiene requirements


I.S. EN 12043:20001342.

Food processing machinery -Intermediate provers - Safety and hygiene requirements


I.S. EN 12158-1:20001343.

Builders hoists for goodsPart 1: Hoists with accessible platforms


I.S. EN 12159:20001344.

Builders hoists for persons and materials with vertically guided cages


I.S. EN 12200-1:20001345.

Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U)Part 1: Specifications for pipes, fittings and the system


I.S. EN ISO 12215-1:20001346.

Small craft - Hull construction and scantlings - Part 1: Materials: Thermosetting resins,glass-fibre reinforcement, reference laminate (ISO 12215-1:2000)


Date: 18/07/2018 Page

I.S. EN 12224:20001347.

Geotextiles and geotextile-related products - Determination of the resistance toweathering


I.S. EN 12225:20001348.

Geotextiles and geotextile-related products - Method for determining the microbiologicalresistance by a soil burial test


I.S. EN 12255-3:20001349.

Wastewater treatment plants -Part 3: Preliminary treatment


I.S. EN 12226:20001350.

Geotextiles and geotextile-related products - General tests for evaluation followingdurability testing


I.S. EN 12310-2:20001351.

Flexible sheets for waterproofing - Determination of resistance to tearing -Part 2: Plastic and rubber sheets for roof waterproofing


I.S. EN 12311-2:20001352.

Flexible sheets for waterproofing - Determination of tensile propertiesPart 2: Plastic and rubber sheets for roof waterproofing


I.S. EN 12316-2:20001353.

Flexible sheets for waterproofing - Determination of peel resistance of joints - Part 2:Plastic and rubber sheets for roof waterproofing


I.S. EN 12317-2:20001354.

Flexible sheets for waterproofing - Determination of shear resistance of joints - Part 2:Plastic and rubber sheets for roof waterproofing


I.S. EN 12354-4:20001355.

Building Acoustics - Estimation of acoustic performance of buildings from theperformance of elements Part 4: Transmission of indoor sound to the outside


I.S. EN 12373-11:20001356.

Aluminium and aluminium alloys - AnodizingPart 11: Measurement of specular reflectance and specular gloss of anodic oxidationcoatings at angles of 20°, 45°, 60° or 80°.


I.S. EN 12373-12:20001357.

Aluminium and aluminium alloys - Anodizing - Part 12: Measurement of reflectancecharacteristics of aluminium surfaces using integrating-sphere instruments


I.S. EN 12373-13:20001358.

Aluminium and aluminium alloys - Anodizing -Part 13: Measurement of reflectance characteristics of aluminium surfaces using agoniophotometer or an abridged goniophotometer.


Date: 18/07/2018 Page

I.S. EN 12373-14:20001359.

Aluminium and aluminium alloys - Anodizing -Part 14: Visual determination of image clarity of anodix oxidation coatings - Chart scalemethod


I.S. EN 12373-15:20001360.

Aluminium and aluminium alloys - Anodizing -Part 15: Assessment of resistance of anodic oxidation coatings to cracking bydeformation


I.S. EN 12442-1:20001361.

Animal tissues and their derivatives utilized in the manufacture of medical devices - Part1: Analysis and management of risk


I.S. EN 12442-2:20001362.

Animal tissues and their derivativesutilised in the manufacture of medical devices - Part 2: Controls on sourcing, collectionand handling


I.S. EN 12442-3:20001363.

Animal tissues and their derivatives utilized in the manufacture of medical devices - Part3: Validation of the elimination and/or inactivation of viruses and transmissible agents


I.S. EN ISO 11979-4:20001364.

Ophthalmic implants - Intraocular lenses Part 4: Labelling and information(ISO 11979-4:2000)


I.S. EN ISO 11254-1:20001365.

Lasers and laser-related equipment - Determination of laser-induced damage thresholdof optical surfaces - Part 1: 1 on 1 test (ISO 11254-1:2000)


I.S. EN 315:20001366.

Plywood - Tolerances for dimensions


I.S. EN 442-2:1996/A1:20001367.

Radiators and convectors - Part 2: Test Methods and rating


I.S. EN 357:20001368.

Glass in building - Fire resistant glazed elements with trannsparent or translucent glassproducts - Classification of fire resistance


I.S. EN ISO 9000:20001369.

Quality management systems - Fundamentals and vocabulary (ISO 9000:2000)


I.S. EN ISO 9001:20001370.

Quality management systems - Requirements (ISO 9001:2000)


Date: 18/07/2018 Page

I.S. EN ISO 9004:20001371.

Quality management systems - Guidelines for performance improvements (ISO9004:2000)


I.S. EN 46003:19991372.

Quality systems - Medical devices - Particular requirements for the application of ENISO 9003


I.S. EN 13179-2:20001373.

Tests for filler aggregate used in bituminous mixtures - Part 2: Bitumen number


I.S. EN 12763:20001374.

Fibre-cement pipes and fittings for discharge systems for buildings - Dimensions andtechnical terms of delivery


I.S. EN 12567:20001375.

Industrial valves - Isolating valves for LNG - Specification for suitability and appropriateverification tests


I.S. EN 12303:20001376.

Coal tar based oils - Terminology


I.S. EN 1147:20001377.

Portable ladders for fire service use


I.S. EN 1121:20001378.

Doors - Behaviour between two different climates - Test method


I.S. EN 12797:20001379.

Brazing - Destructive tests of brazed joints


I.S. EN ISO 7093-2:20001380.

Plain washers - Large series - Part 2: Product grade C (ISO 7093-2:2000)


I.S. EN ISO 10075-1:20001381.

Ergonomic principles related to mental work-load - Part 1: General terms and definitions(ISO 10075:1991)


I.S. ENV 927-2:20001382.

Paints and varnishes - Coating materials and coating systems for exterior wood - Part 2:Performance specification


I.S. EN ISO 5456-2:19991383.

Technical drawings - Projection methods - Part 2: Orthographic representations (ISO5456-2:1996)


Date: 18/07/2018 Page

IRISH STANDARDS PUBLISHED BASED ON CEN/CENELEC … · 6. I.S. ENV 1996-3:1999 Eurocode 6: Design of...

Documents

Transcript of IRISH STANDARDS PUBLISHED BASED ON CEN/CENELEC … · 6. I.S. ENV 1996-3:1999 Eurocode 6: Design of...