IRISH STANDARDS PUBLISHED BASED ON CEN/CENELEC … · 2018. 7. 18. · 10. I.S. HD 632 S1:1999...
Transcript of IRISH STANDARDS PUBLISHED BASED ON CEN/CENELEC … · 2018. 7. 18. · 10. I.S. HD 632 S1:1999...
-
IRISH STANDARDS PUBLISHED BASED ON CEN/CENELEC STANDARDS
I.S. CR 1100:19931.
Memorandum on Health and Safety Standardization in Support of "New Approach"Directives – Application in the Field of Machinery
18 MARCH 2007Date published
S.R. CR 1404:19942.
Determination of Emissions from Appliances Burning Gaseous Fuels During Type-Testing
18 MARCH 2007Date published
I.S. CR 12349:19963.
Mechanical vibration - Guide to the health effects of vibration on the human body.18 MARCH 2007Date published
I.S. CR 12700:19974.
Supporting document to ENV 1613:1994 - Messages for Exchange of LaboratoryInformation
18 MARCH 2007Date published
CR 12787:198975.
Status report on Diesel fuel lubricity18 MARCH 2007Date published
I.S. CR 1472:19976.
General guidance for the marking of gas appliances18 MARCH 2007Date published
CR 12968:19977.
Comparison document between Council Regulations (EEC) 1836/93 of June 1993allowing voluntary participation by companies in the industrial sector in a Communityeco-management and audit scheme, and the ISO 14000 series
18 MARCH 2007Date published
I.S. CR 13033:19978.
Personal protective equipment - Lifejackets and buoyancy aids - Guide for selection anduse
18 MARCH 2007Date published
CR 13058:19989.
Medical Data Interchange: Mapping between the models specified in ENV 12539:1997and NEMA PS3 Supplement 10
18 MARCH 2007Date published
I.S. HD 632 S1:199910.
Power cables with extruded insulation and their accessories for rated voltages above 36kV (Um = 42 kV) up to 150 kV (Um = 170 kV)
15 FEBRUARY 2007Date published
I.S. CR 12739:199911.
Biotechnology - Laboratories for research, development and analysis - Report on theselection of equipment needed for biotechnology laboratories according to the degree ofhazard
18 MARCH 2007Date published
CWA 13404:199912.
Catalogue of high-level naming schemes and imcompatibility issues18 MARCH 2007Date published
Date: 18/07/2018 Page 1
-
CR 1749:199913.
European scheme for the classification of gas appliances according to the method ofevacuation of the products of combustion (types)
18 MARCH 2007Date published
I.S. CR 1752:199914.
Ventilation for buildings - Design criteria for the indoor environment18 MARCH 2007Date published
CR 12660:199915.
Geographic information - Processing - Query and update: spatial aspects18 MARCH 2007Date published
CR 13388:199916.
Copper and copper alloys - Compendium of compositions and products18 MARCH 2007Date published
CR 13425:199917.
Geographic information - Overview18 MARCH 2007Date published
CR 13436:199918.
Geographic information - Vocabulary18 MARCH 2007Date published
CR 13568:199919.
Geographic information - Data description - Conceptual schema language18 MARCH 2007Date published
CR 13576:199920.
Implementation of EN 729 on quality requirements for fusion welding of metallicmaterials
18 MARCH 2007Date published
CWA 13620-1:199921.
ESCROWGUIDE - Source Code EScrow - Guidelines for Acquirers, Developers, EscrowAgents and Quality Assessors - Part 1: An introduction to source code escrow
18 MARCH 2007Date published
CWA 13620-2:199922.
ESCROWGUIDE - Source Code Escrow - Guidelines for Acquirers, Developers, EscrowAgents and Quality Assessors - Part 2: A guide to using source code escrow to protectprocurement
18 MARCH 2007Date published
CWA 13620-3:199923.
ESCROWGUIDE - Source Code Escrow - Guidelines for Acquirers, Developers, EscrowAgents and Quality Assessors - Part 3: A developer’s guide to taking part in source codeescrow
18 MARCH 2007Date published
CWA 13620-4:199924.
ESCROWGUIDE - Source Code Escrow - Guidelines for Acquirers, Developers, EscrowAgents and Quality Assessors - Part 4: A guide to providing a reliable escrow service
18 MARCH 2007Date published
CWA 13620-5:199925.
ESCROWGUIDE - Source Code Escrow - Guidelines for Acquirers, Developers, EscrowAgents and Quality Assessors - Part 5: A guide to auditing the escrow process
18 MARCH 2007Date published
Date: 18/07/2018 Page 2
-
S.R. CR 13582:199926.
Heat meter installation - Some guidelines for selecting, installation and operation of heatmeters
18 MARCH 2007Date published
CWA 13678:199927.
Guidelines for naming in the Directory18 MARCH 2007Date published
CWA 13679:199928.
Guidelines for naming in the Internet environment18 MARCH 2007Date published
CWA 13680:199929.
X.500 Profile ADY61 - Administrative Areas18 MARCH 2007Date published
CWA 13681:199930.
X.500 Profile ADY63 - Schema administration and publication18 MARCH 2007Date published
CWA 13682:199931.
X.500 Profile ADY72 - Hierarchical Operational Bindings18 MARCH 2007Date published
CWA 13691:199932.
Message Implementation Guidelines (MIGs)18 MARCH 2007Date published
CWA 13692:199933.
Product and Business Data Harmonisation (PBDH)18 MARCH 2007Date published
CWA 13699:199934.
Model for Metadata for Multimedia Information18 MARCH 2007Date published
CWA 13700:199935.
Requirements for Metadata for Multimedia Information18 MARCH 2007Date published
I.S. ENV 583-6:200036.
Non-destructive testing - Ultrasonic examination - Part 6: Time-of-flight diffractiontechnique as a method for detection and sizing of discontinuities
18 MARCH 2007Date published
I.S. ENV 13563:200037.
Traffic control equipment - Vehicle detectors18 MARCH 2007Date published
S.R. CR 13825:200038.
Luer connectors - A report to CEN chef from the CEN forum task group “Luer fittings”18 MARCH 2007Date published
I.S. ENV 12520:200039.
Domestic furniture - Seating - Mechanical and structural safety requirements18 MARCH 2007Date published
S.R. CR 13695-1:200040.
Packaging - Requirements for measuring and verifying the four heavy metals and otherdangerous substances present in packaging and their release into the environment -Part 1: Requirements for measuring and verifying the four heavy metals present inpackaging
18 MARCH 2007Date published
Date: 18/07/2018 Page 3
-
CWA 13874:200041.
Dublin Core Metadata Element Set - Reference Description - Version 1.118 MARCH 2007Date published
I.S. CR ISO 15608:200042.
Welding - Guidelines for a metallic material grouping system (ISO/TR 15608:2000)18 MARCH 2007Date published
I.S. ENV 581-2:200043.
Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 2:Mechanical safety requirements and test methods for sampling
18 MARCH 2007Date published
I.S. ENV 1852-2:200044.
Plastics piping systems for non-pressure underground drainage and sewerage -Polypropylene (PP) - Part 2: Guidance for the assessment of conformity
18 MARCH 2007Date published
I.S. ENV 12313-4:200045.
Traffic and Traveller Information (TTI) - TTI Messages via Traffic Message Coding - Part4: Coding Protocol for Radio Data System - Traffic Message Channel (RDS-TMC) -RDS-TMC using ALERT Plus with ALERT C
18 MARCH 2007Date published
I.S. ENV 12521:200046.
Domestic furniture - Tables - Mechanical and structural safety requirements18 MARCH 2007Date published
I.S. ENV 12837:200047.
Paints and varnishes - Qualification of inspectors for corrosion protection of steelstructures by protective paint systems
18 MARCH 2007Date published
I.S. ENV 13712:200048.
Postal services - Forms - Harmonised vocabulary18 MARCH 2007Date published
S.R. CR 13688:200049.
Packaging - Material recycling - Report on requirements for substances and materials toprevent a sustained impediment to recycling
18 MARCH 2007Date published
CWA 13881:200050.
X-500 profiel ADY62 - Establishment and Utilisation of Shadowing Agreements18 MARCH 2007Date published
CWA 13882:200051.
X-500 profile ADY41 - Directory User Agent (DUA) Authentication As Directory AccessProtocol (DAP) Initiator
18 MARCH 2007Date published
CWA 13883:200052.
X-500 profile ADY41- Directory System Agent (DSA) Access Control18 MARCH 2007Date published
CWA 13884:200053.
X-500 profile ADY41 - Directory User Agent (DUA) - Support of Directory AccessProtocol (DAP)
18 MARCH 2007Date published
CWA 13896:200054.
Lightweight Directory Access Protocol (LDAP) client profile18 MARCH 2007Date published
Date: 18/07/2018 Page 4
-
I.S. CR 13930:200055.
Rotodynamic pumps - Design of pump intakes - Recommendations for installation ofpumps
18 MARCH 2007Date published
I.S. CR 13931:200056.
Rotodynamic pumps - Forces and moments on flanges centrifugal, mixed flow and axialflow pumps - Horizontal and vertical shafts
18 MARCH 2007Date published
I.S. CR 13932:200057.
Rotodynamic pumps - Recommendations for fitting of inlet and outlet on piping18 MARCH 2007Date published
I.S. CWA 13992:200058.
Recommendations for Standardization in the field of XML for Electronic DataInterchange
18 MARCH 2007Date published
I.S. CWA 13992:200059.
Recommendations and Guidance on the use of XML for Electronic Data Interchange18 MARCH 2007Date published
I.S. CWA 13994:200060.
X.500 Profile ADY12 - DUA Support of Distributed Operations18 MARCH 2007Date published
I.S. CWA 13995:200061.
X.500 Profile ADY21 - DAS Support of Directory Access Protocol18 MARCH 2007Date published
I.S. ENV 12169:200062.
Criteria for the assessment of conformity of a lot of sawn timber17 MARCH 2007Date published
I.S. ENV 13106:200063.
Road transport and traffic telematics - DATEX traffic and travel data dictionary (version3.1a)
18 MARCH 2007Date published
I.S. ENV 13608-3:200064.
Health informatics - Security for healthcare communication - Part 3: Secure datachannels
18 MARCH 2007Date published
I.S. ENV 13777:200065.
Road transport and traffic telematics - DATEX specifications for data exchange betweentraffic and travel information centres (version 1.2a)
18 MARCH 2007Date published
S.R. CR 13901:200066.
The use of the concept of concrete families for the production and conformity control ofconcrete
18 MARCH 2007Date published
I.S. ENV 13735:200167.
Health informatics - Interoperability of patient connected medical devices18 MARCH 2007Date published
I.S. ENV 13759:200168.
Domestic furniture - Seating - Test method for the determination of the durability ofreclining and/or tilting mechanisms and operating mechanisms for convertible sofa beds
18 MARCH 2007Date published
Date: 18/07/2018 Page 5
-
I.S. ENV 13834:200169.
Cookware - Ovenware for use in conventional domestic ovens18 MARCH 2007Date published
I.S. CWA 14040:200070.
A Standardisation Work Programme for "Learning and Training Technologies andEducational Multimedia Software”
18 MARCH 2007Date published
I.S. ENV 1993-3-2:199771.
Eurocode 3: Design of steel structures - Part 3-2: Towers, masts and chimneys -Chimneys
1 JANUARY 2007Date published
I.S. ENV 12108:200172.
Plastics piping systems - Guidance for the installation inside buildings of pressure pipingsystems for hot and cold water intended for human consumption
17 MARCH 2007Date published
S.R. CR 13910:200073.
Packaging - Report on criteria and methodologies for life cycle analysis of packaging18 MARCH 2007Date published
I.S. CWA 13989:200074.
Description of structure and maintenance of the web based Observatory of Europeanwork on metadata
18 MARCH 2007Date published
I.S. CWA 14051-1:200175.
Information Technology - European generic locales - Part 1: General specifications18 MARCH 2007Date published
I.S. CWA 14051-2:200176.
Information Technology - European generic locales - Part 2 Narrative culturalspecifications, POSIX locales, and repertoiremap
18 MARCH 2007Date published
S.R. CR 14060:200077.
Medical device traceability18 MARCH 2007Date published
I.S. CWA 14088-1:200178.
European Electronic Commerce for Hospital Procurement (ECHOP) - Part 1: Commonoperations carried out by HPDs (Hospital Procurement Department) in Europe
18 MARCH 2007Date published
I.S. CWA 14088-2:200179.
European Electronic Commerce for Hospital Procurement (ECHOP) - Part 2: List ofstandardised functional and technical specifications V.O.1
18 MARCH 2007Date published
I.S. CWA 14088-3:200180.
European Electronic Commerce for Hospital Procurement (ECHOP) - Part 3: Protocolsof security and the interoperable authentication at the level of the sector V.O.1
18 MARCH 2007Date published
I.S. CWA 14088-4:200181.
European Electronic Commerce for Hospital Procurement (ECHOP) - Part 4: Futureoperations that should need to be standardised (due to the appearance of astandardised denomination of products)
18 MARCH 2007Date published
Date: 18/07/2018 Page 6
-
I.S. CWA 14088-5:200182.
European Electronic Commerce for Hospital Procurement (ECHOP) - Part 5:Technology that still needs to be standardised
18 MARCH 2007Date published
I.S. CWA 14088-6:200183.
European Electronic Commerce for Hospital Procurement (ECHOP) - Part 6: Legalissues to facilitate the standardisation of electronic commerce
18 MARCH 2007Date published
I.S. CWA 14113-1:200184.
Electronic Commerce for the Sanitaryware and Heating Systems Industry - Part 1:Product Terminology and Classification
18 MARCH 2007Date published
I.S. CWA 14113-2:200185.
Electronic Commerce for the Sanitaryware and Heating Systems Industry - Part 2:Digital Formats
18 MARCH 2007Date published
I.S. CWA 14113-3:200186.
Electronic Commerce for the Sanitaryware and Heating Systems Industry - Part 3:Rights and Rules
18 MARCH 2007Date published
I.S. CWA 14113-4:200187.
Electronic Commerce for the Sanitaryware and Heating Systems Industry - Part 4:Industry Common Data Bank
18 MARCH 2007Date published
I.S. CWA 14162:200188.
Datatyping for Electronic Data Interchange18 MARCH 2007Date published
I.S. HD 472 S1:200289.
Nominal voltages for low-voltage public electricity supply systems (IEC 60038:1983(MOD))
24 FEBRUARY 2007Date published
I.S. CWA 13988:200390.
Guidance information for the use of Dublin Core in Europe18 MARCH 2007Date published
I.S. EN 60704-2-13:2003-200791.
Household and similar electrical appliances - Test code for the determination of airborneacoustical noise -- Part 2-13: Particular requirements for range hoods (IEC 60704-2-13:2000 (EQV))
8 JUNE 2007Date published
I.S. EN 62330-1:200492.
Helical-scan digital video cassette recording system using 12,65 mm (0,5 in) magnetictape - Format HD-D5 -- Part 1: VTR specifications (IEC 62330-1:2003 (EQV))
25 FEBRUARY 2007Date published
I.S. EN 62330-2:200493.
Helical-scan digital video cassette recording system using 12,65 mm (0,5 in) magnetictape - Format HD-D5 -- Part 2: Compression format (IEC 62330-2:2003 (EQV))
25 FEBRUARY 2007Date published
Date: 18/07/2018 Page 7
-
I.S. EN 62330-3:200494.
Helical-scan digital video cassette recording system using 12,65 mm (0,5 in) magnetictape - Format HD-D5 -- Part 3: Data stream format (IEC 62330-3:2003 (EQV))
25 FEBRUARY 2007Date published
S.R. CWA 14890-1:200495.
Application Interface for smart cards used as Secure Signature Creation Devices - Part1: Basic requirements
18 MARCH 2007Date published
I.S. EN 1993-1-2:200596.
Eurocode 3: Design of steel structures - Part 1-2: General rules - Structural fire design29 JANUARY 2007Date published
I.S. EN 1993-1-8:200597.
Eurocode 3: Design of steel structures - Part 1-8: Design of joints29 JANUARY 2007Date published
I.S. EN 1993-1-9:200598.
Eurocode 3: Design of steel structures - Part 1-9: Fatigue29 JANUARY 2007Date published
I.S. EN 1993-1-10:200599.
Eurocode 3: Design of steel structures - Part 1-10: Material toughness and through-thickness properties
29 JANUARY 2007Date published
I.S. EN ISO/IEC 17025:2005100.
General requirements for the competence of testing and calibration laboratories(ISO/IEC 17025:2005)
1 APRIL 2007Date published
I.S. EN 12264:2005101.
Health informatics - Categorial structures for systems of concepts16 JULY 2007Date published
I.S. EN 1710:2005102.
Equipment and components intended for use in potentially explosive atmospheres inunderground mines
18 MARCH 2007Date published
I.S. EN 60061-1:1993/A36:2005103.
Lamp caps and holders together with gauges for the control of interchangeability andsafety -- Part 1: Lamp caps (IEC 60061-1:1969/A36:2005 (EQV))
6 JUNE 2007Date published
I.S. EN 60061-3:1993/A35:2005104.
Lamp caps and holders together with gauges for the control of interchangeability andsafety -- Part 3: Gauges (IEC 60061-3:1969/A35:2005 (EQV))
6 JUNE 2007Date published
I.S. EN 60938-2:1999105.
Fixed inductors for electromagnetic interference suppression -- Part 2: Sectionalspecification (IEC 60938-2:1999 (EQV))
21 MARCH 2007Date published
I.S. EN 61242:1997/A12:2006106.
Electrical accessories - Cable reels for household and similar purposes25 FEBRUARY 2007Date published
Date: 18/07/2018 Page 8
-
I.S. EN 60311:2003/A1:2006107.
Electric irons for household or similar use - Methods for measuring performance (IEC60311:2002/A1:2005 (EQV))
18 OCTOBER 2007Date published
I.S. EN 13445-5:2002/LC:2006108.
Unfired pressure vessels - Part 5: Inspection and testing16 MARCH 2007Date published
I.S. EN 1992-3:2006109.
Eurocode 2 - Design of concrete structures - Part 3: Liquid retaining and containmentstructures
21 SEPTEMBER 2007Date published
I.S. EN 165:2006/LC:2007110.
Personal eye-protection - Vocabulary16 MARCH 2007Date published
I.S. EN 15167-1:2006111.
Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 1:Definitions, specifications and conformity criteria
25 APRIL 2007Date published
I.S. EN 12353:2006/LC:2006112.
Chemical disinfectants and antiseptics - Preservation of test organisms used for thedetermination of bactericidal, mycobactericidal, sporicidal and fungicidal activity (incl.corrig. Sept 06)
7 FEBRUARY 2007Date published
I.S. EN 13480-4:2006113.
Metallic industrial piping - Part 4: Fabrication and installation7 FEBRUARY 2007Date published
I.S. EN 3425:2006/LC:2006114.
Aerospace series - Groove dimensions for axial mouting internal type retaining rings(incl. corrig. Sept 06)
7 FEBRUARY 2007Date published
I.S. CEN TS 14999:2006/LC:2006115.
Adhesives for thermoplastic piping systems - Accelerated ageing test of adhesives (incl.corrig. Sept 06)
7 FEBRUARY 2007Date published
I.S. EN 3426:2006/LC:2006116.
Aerospace series - Groove dimensions for axial mounting external type retaining rings(incl. corrig. Sept 06)
7 FEBRUARY 2007Date published
I.S. EN ISO 21969:2006/LC:2006117.
High-pressure flexible connections for use with medical gas systems (ISO 21969:2005)(incl. corrig. Sept 06)
7 FEBRUARY 2007Date published
I.S. EN 61747-3-1:2006118.
Liquid crystal display devices -- Part 3-1: Liquid crystal display (LCD) cells - Blank detailspecification (IEC 61747-3-1:2006 (EQV))
26 JANUARY 2007Date published
I.S. EN 1993-1-3:2006119.
Eurocode 3 - Design of steel structures - Part 1-3: General rules - Supplementary rulesfor cold-formed members and sheeting
29 JANUARY 2007Date published
Date: 18/07/2018 Page 9
-
I.S. EN 1993-1-4:2006120.
Eurocode 3 - Design of steel structures - Part 1-4: General rules - Supplementary rulesfor stainless steels
29 JANUARY 2007Date published
I.S. EN 1993-1-5:2006121.
Eurocode 3 - Design of steel structures - Part 1-5: Plated structural elements29 JANUARY 2007Date published
I.S. EN 1993-2:2006122.
Eurocode 3 - Design of steel structures - Part 2: Steel Bridges29 JANUARY 2007Date published
I.S. EN 1993-1-11:2006123.
Eurocode 3 - Design of steel structures - Part 1-11: Design of structures with tensioncomponents
29 JANUARY 2007Date published
I.S. EN 1993-3-1:2006124.
Eurocode 3 - Design of steel structures - Part 3-1: Towers, masts and chimneys -Towers and masts
29 JANUARY 2007Date published
I.S. EN 1993-3-2:2006125.
Eurocode 3 - Design of steel structures - Part 3-2: Towers, masts and chimneys -Chimneys
29 JANUARY 2007Date published
I.S. EN 62002-1:2006126.
Mobile and portable DVB-T/H radio access -- Part 1: Interface specification (IEC 62002-1:2005 (EQV))
26 JANUARY 2007Date published
I.S. EN ISO 13501:2006127.
Petroleum and natural gas industries - Drilling fluids - Processing systems evaluation(ISO 13501:2005)
22 JANUARY 2007Date published
I.S. EN ISO 13628-7:2006128.
Petroleum and natural gas industries - Design and operation of subsea productionsystems - Part 7: Completion/workover riser systems (ISO 13628-7:2005)
22 JANUARY 2007Date published
I.S. EN 15035:2006129.
Heating boilers - Special requirements for oil fired room sealed units up to 70 kW22 JANUARY 2007Date published
I.S. EN 3-8:2006130.
Portable fire extinguishers - Part 8: Additional requirements to EN 3-7 for theconstruction, resistance to pressure and mechanical tests for extinguishers with amaximum allowable pressure equal to or lower than 30 bar
22 JANUARY 2007Date published
I.S. EN 3-9:2006131.
Portable fire extinguishers - Part 9: Additional requirements to EN 3-7 for pressureresistance of CO2 extinguishers
22 JANUARY 2007Date published
I.S. EN 1015-1:1998/A1:2006132.
Methods of test for mortar for masonry - Part 1: Determination of particle size distribution(by sieve analysis)
22 JANUARY 2007Date published
Date: 18/07/2018 Page 10
-
I.S. EN 1015-10:1999/A1:2006133.
Methods of test for mortar for masonry - Part 10: Determination of dry bulk density ofhardened mortar
22 JANUARY 2007Date published
I.S. EN 1015-11:1999/A1:2006134.
Methods of test for mortar for masonry - Part 11: Determination of flexural andcompressive strength of hardened mortar
22 JANUARY 2007Date published
I.S. EN 1015-2:1998/A1:2006135.
Methods of test for mortar for masonry - Part 2: Bulk sampling of mortars andpreparation of test mortars
22 JANUARY 2007Date published
I.S. EN 1015-3:1999/A2:2006136.
Methods of test for mortar for masonry - Part 3: Determination of consistence of freshmortar (by flow table)
22 JANUARY 2007Date published
I.S. EN 1015-6:1998/A1:2006137.
Methods of test for mortar for masonry - Part 6: Determination of bulk density of freshmortar
22 JANUARY 2007Date published
I.S. EN 1015-9:1999/A1:2006138.
Methods of test for mortar for masonry - Part 9: Determination of workable life andcorrection time of fresh mortar
22 JANUARY 2007Date published
I.S. EN 15219:2006139.
Water equipment inside buildings - Nitrate removal devices - Requirements forperformance, safety and testing
22 JANUARY 2007Date published
I.S. EN 15161:2006140.
Water equipment inside buildings - Nitrate removal devices - Requirements forperformance, safety and testing
22 JANUARY 2007Date published
I.S. CEN TS 14421:2006141.
Hose tail and ferrule for crimping and swaging22 JANUARY 2007Date published
I.S. EN 15238:2006142.
Soil improvers and growing media - Determination of quantity for materials with particlesize greater than 60 mm
22 JANUARY 2007Date published
I.S. EN 1936:2006143.
Natural stone test methods - Determination of real density and apparent density, and oftotal and open porosity
22 JANUARY 2007Date published
I.S. EN 12372:2006144.
Natural stone test methods - Determination of flexural strength under concentrated load22 JANUARY 2007Date published
I.S. EN 15202:2006145.
LPG equipment and accessories - Essential operational dimensions for LPG cylindervalve outlet and associated equipment connections
22 JANUARY 2007Date published
Date: 18/07/2018 Page 11
-
I.S. EN 14140:2003+A1:2006146.
LPG equipment and accessories - Transportable refillable welded steel cylinders forLPG - Alternative design and construction
22 JANUARY 2007Date published
I.S. EN 14879-2:2006147.
Organic coating systems and linings for protection of industrial apparatus and plantsagainst corrosion caused by aggressive media - Part 2: Coatings on metalliccomponents
22 JANUARY 2007Date published
I.S. EN 14879-3:2006148.
Organic coating systems and linings for protection of industrial apparatus and plantsagainst corrosion caused by aggressive media - Part 3: Coatings on concretecomponents
22 JANUARY 2007Date published
I.S. EN 10130:2006149.
Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions22 JANUARY 2007Date published
I.S. EN 30-1-4:2002/A1:2006150.
Domestic cooking appliances burning gas - Part 1-4: Safety - Appliances having one ormore burners with an automatic burner control system
22 JANUARY 2007Date published
I.S. CEN TS 13547:2006151.
Industrial valves - Copper alloy ball valves22 JANUARY 2007Date published
I.S. CEN TS 15025:2006152.
Copper and copper alloys - Determination of magnesium content - Flame atomicabsorption spectrometry method (FAAS)
22 JANUARY 2007Date published
I.S. CEN TS 15023-3:2006153.
Copper and copper alloys - Determination of nickel content - Part 3: Flame atomicabsorption spectrometry method (FAAS)
22 JANUARY 2007Date published
I.S. CEN TS 15022-4:2006154.
Copper and copper alloys - Determination of tin content - Part 4: Medium tin content -Flame atomic absorption spectrometry method (FAAS)
22 JANUARY 2007Date published
I.S. EN ISO 1520:2006155.
Paints and varnishes - Cupping test (ISO 1520:2006)22 JANUARY 2007Date published
I.S. EN 14492-2:2006156.
Cranes - Power driven winches and hoists - Part 2: Power driven hoists22 JANUARY 2007Date published
I.S. EN 474-12:2006157.
Earth-moving machinery - Safety - Part 12: Requirements for cable excavators22 JANUARY 2007Date published
I.S. EN 474-1:2006158.
Earth-moving machinery - Safety - Part 1: General requirements22 JANUARY 2007Date published
Date: 18/07/2018 Page 12
-
I.S. EN 474-2:2006159.
Earth-moving machinery - Safety - Part 2: Requirements for tractor-dozers22 JANUARY 2007Date published
I.S. EN 474-3:2006160.
Earth-moving machinery - Safety - Part 3: Requirements for loaders22 JANUARY 2007Date published
I.S. EN 474-4:2006161.
Earth-moving machinery - Safety - Part 4: Requirements for backhoe loaders22 JANUARY 2007Date published
I.S. EN 474-5:2006162.
Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators22 JANUARY 2007Date published
I.S. EN 474-6:2006163.
Earth-moving machinery - Safety - Part 6: Requirements for dumpers22 JANUARY 2007Date published
I.S. EN 474-7:2006164.
Earth-moving machinery - Safety - Part 7: Requirements for scrapers22 JANUARY 2007Date published
I.S. EN 474-8:2006165.
Earth-moving machinery - Safety - Part 8: Requirements for graders22 JANUARY 2007Date published
I.S. EN 474-9:2006166.
Earth-moving machinery - Safety - Part 9: Requirements for pipelayers22 JANUARY 2007Date published
I.S. EN 474-10:2006167.
Earth-moving machinery - Safety - Part 10: Requirements for trenchers22 JANUARY 2007Date published
I.S. EN 474-11:2006168.
Earth-moving machinery - Safety - Part 11: Requirements for earth and landfillcompactors
22 JANUARY 2007Date published
I.S. CEN TS 15379:2006169.
Building management - Terminology and scope of services22 JANUARY 2007Date published
I.S. EN ISO 1805:2006170.
Fishing nets - Determination of breaking force and knot breaking force of netting yarns(ISO 1805:2006)
22 JANUARY 2007Date published
I.S. EN 13967:2004/A1:2006171.
Flexible sheets for waterproofing - Plastic and rubber damp proof sheets includingplastic and rubber basement tanking sheet - Definitions and characteristics
22 JANUARY 2007Date published
I.S. EN 13969:2005/A1:2006172.
Flexible sheets for waterproofing - Bitumen damp proof sheets including bitumenbasement tanking sheets - Definitions and characteristics
22 JANUARY 2007Date published
I.S. EN 13970:2005/A1:2006173.
Flexible sheets for waterproofing - Bitumen water vapour control layers - Definitions andcharacteristics
22 JANUARY 2007Date published
Date: 18/07/2018 Page 13
-
I.S. EN 13984:2004/A1:2006174.
Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitionsand characteristics
22 JANUARY 2007Date published
I.S. EN 13707:2004/A1:2006175.
Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing -Definitions and characteristics
22 JANUARY 2007Date published
I.S. EN 13858:2006176.
Corrosion protection of metals - Non-electrolytically applied zinc flake coatings on iron orsteel components
22 JANUARY 2007Date published
I.S. EN 15205:2006177.
Determination of hexavalent chromium in corrosion protectionlayers - Qualitative analysis
22 JANUARY 2007Date published
I.S. EN 13480-3:2002/A2:2006178.
Metallic industrial piping - Part 3: Design and calculation22 JANUARY 2007Date published
I.S. EN 15109:2006179.
Surface active agents - Determination of the active matter content ofalkylamidopropylbetaines
22 JANUARY 2007Date published
I.S. EN 15168:2006180.
Surface active agents - Determination of hydroxyl value - p-Toluensulfonyl isocyanate(TSI) method and potentiometric titration with tetrabutylammonium hydroxide
22 JANUARY 2007Date published
I.S. EN 13964:2004/A1:2006181.
Suspended ceilings - Requirements and test methods22 JANUARY 2007Date published
I.S. CEN TS 14997:2006182.
Characterization of waste - Leaching behaviour tests - Influence of pH on leaching withcontinuous pH-control
22 JANUARY 2007Date published
I.S. CEN TS 15440:2006183.
Solid recovered fuels - Method for the determination of biomass content22 JANUARY 2007Date published
I.S. EN 81-71:2005+A1:2006184.
Safety rules for the construction and installation of lifts - Particular applications topassenger lifts and goods passenger lifts - Part 71: Vandal resistant lifts
7 FEBRUARY 2007Date published
I.S. EN ISO 19903:2006185.
Petroleum and natural gas industries - Fixed concrete offshore structures (ISO19903:2006)
7 FEBRUARY 2007Date published
I.S. EN ISO 13628-8:2006186.
Petroleum and natural gas industries - Design and operation of subsea productionsystems - Part 8: Remotely Operated Vehicle (ROV) interfaces on subsea productionsystems (ISO 13628-8:2002)
7 FEBRUARY 2007Date published
Date: 18/07/2018 Page 14
-
I.S. EN ISO 13628-9:2006187.
Petroleum and natural gas industries - Design and operation of subsea productionsystems - Part 9: Remotely Operated Tool (ROT) intervention systems (ISO 13628-9:2000)
7 FEBRUARY 2007Date published
I.S. EN ISO 15663-1:2006188.
Petroleum and natural gas industries - Life cycle costing - Part 1: Methodology (ISO15663-1:2000)
7 FEBRUARY 2007Date published
I.S. EN 13445-6:2002/A2:2006189.
Unfired pressure vessels - Part 6: Requirements for the design and fabrication ofpressure vessels and pressure parts constructed from spheroidal graphite cast iron
7 FEBRUARY 2007Date published
I.S. EN 13947:2006190.
Thermal performance of curtain walling - Calculation of thermal transmittance7 FEBRUARY 2007Date published
I.S. EN 1093-2:2006191.
Safety of machinery - Evaluation of the emission of airborne hazardous substances -Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant
7 FEBRUARY 2007Date published
I.S. EN 1093-3:2006192.
Safety of machinery - Evaluation of the emission of airborne hazardous substances -Part 3: Test bench method for the measurement of the emission rate of a given pollutant
7 FEBRUARY 2007Date published
I.S. CEN TR 15481:2006193.
Welding of reinforcing steel - Tack weldability - Test methods and performancerequirements
7 FEBRUARY 2007Date published
I.S. EN ISO 15535:2006194.
General requirements for establishing anthropometric databases (ISO 15535:2006)7 FEBRUARY 2007Date published
I.S. EN ISO 14880-2:2006195.
Optics and photonics - Microlens arrays - Part 2: Test methods for wavefront aberrations(ISO 14880-2:2006)
7 FEBRUARY 2007Date published
I.S. EN 14358:2006196.
Timber structures - Calculation of characteristic 5-percentile values and acceptancecriteria for a sample
7 FEBRUARY 2007Date published
I.S. EN 541:2006197.
Aluminium and aluminium alloys - Rolled products for cans, closures and lids -Specifications
7 FEBRUARY 2007Date published
I.S. EN 15115:2006198.
Textile floor coverings - Determination of sensitivity to spilled water7 FEBRUARY 2007Date published
I.S. EN 958:2006199.
Mountaineering equipment - Energy absorbing systems for use in klettersteig (viaferrata) climbing - Safety requirements and test methods
7 FEBRUARY 2007Date published
Date: 18/07/2018 Page 15
-
I.S. EN 564:2006200.
Mountaineering equipment - Accessory cord - Safety requirements and test methods7 FEBRUARY 2007Date published
I.S. EN 565:2006201.
Mountaineering equipment - Tape - Safety requirements and test methods7 FEBRUARY 2007Date published
I.S. EN 566:2006202.
Mountaineering equipment - Slings - Safety requirements and test methods7 FEBRUARY 2007Date published
I.S. EN 415-6:2006203.
Safety of packaging machines - Part 6: Pallet wrapping machines7 FEBRUARY 2007Date published
I.S. EN 14439:2006204.
Cranes - Safety - Tower cranes7 FEBRUARY 2007Date published
I.S. EN 997:2003/A1:2006205.
WC pans and WC suites with integral trap7 FEBRUARY 2007Date published
I.S. EN 15091:2006206.
Sanitary tapware - Electronic opening and closing sanitary tapware7 FEBRUARY 2007Date published
I.S. EN 15146:2006207.
Solid softwood panelling and cladding - Machined profiles without tongue and groove7 FEBRUARY 2007Date published
I.S. EN 843-1:2006208.
Advanced technical ceramics - Mechanical properties of monolithic ceramics at roomtemperature - Part 1: Determination of flexural strength
7 FEBRUARY 2007Date published
I.S. EN 843-2:2006209.
Advanced technical ceramics - Mechanical properties of monolithic ceramics at roomtemperature - Part 2: Determination of Young's modulus, shear modulus and Poisson'sratio
7 FEBRUARY 2007Date published
I.S. EN 843-5:2006210.
Advanced technical ceramics - Mechanical properties of monolithic ceramics at roomtemperature - Part 5: Statistical analysis
7 FEBRUARY 2007Date published
I.S. CEN TR 12101-4:2006211.
Smoke and heat control systems - Part 4: Installed SHEVS systems for smoke and heatventilation
7 FEBRUARY 2007Date published
I.S. EN 455-3:2006212.
Medical gloves for single use - Part 3: Requirements and testing for biological evaluation7 FEBRUARY 2007Date published
I.S. EN 15257:2006213.
Cathodic protection - Competence levels and certification of cathodic protectionpersonnel
7 FEBRUARY 2007Date published
Date: 18/07/2018 Page 16
-
I.S. EN 12271:2006214.
Surface dressing - Requirements7 FEBRUARY 2007Date published
I.S. EN 1926:2006215.
Natural stone test methods - Determination of uniaxial compressive strength7 FEBRUARY 2007Date published
I.S. EN 14704-3:2006216.
Determination of the elasticity of fabrics - Part 3: Narrow fabrics7 FEBRUARY 2007Date published
I.S. EN 14932:2006217.
Plastics - Stretch thermoplastic films for wrapping bales - Requirements and testmethods
7 FEBRUARY 2007Date published
I.S. EN 14995:2006218.
Plastics - Evaluation of compostability - Test scheme and specifications7 FEBRUARY 2007Date published
I.S. EN 13803-2:2006219.
Railway applications - Track - Track alignment design parameters - Track gauges 1435mm and wider - Part 2: Switches and crossings and comparable alignment designsituations with abrupt changes of curvature
7 FEBRUARY 2007Date published
I.S. EN 12674-4:2006220.
Roll containers - Part 4: Performance requirements7 FEBRUARY 2007Date published
I.S. EN 15207:2006221.
Tanks for transport of dangerous goods - Plug/socket connection and supplycharacteristics for service equipment in hazardous areas with 24 V nominal supplyvoltage
7 FEBRUARY 2007Date published
I.S. EN ISO 14637:2006222.
Milk - Determination of urea content - Enzymatic method using difference in pH(Reference method) (ISO 14637:2004)
7 FEBRUARY 2007Date published
I.S. EN 14797:2006223.
Explosion venting devices7 FEBRUARY 2007Date published
I.S. EN 12588:2006224.
Lead and lead alloys - Rolled lead sheet for building purposes7 FEBRUARY 2007Date published
I.S. EN 3339:2006225.
Aerospace series - Aluminium alloy AL-P7010- - T76 - Die forgings - a = 200 mm7 FEBRUARY 2007Date published
I.S. EN 3476:2006226.
Aerospace series - Steel FE-PL1501 (30CrMo12) - Air melted - Softened - Forging stock- a or D = 300 mm
7 FEBRUARY 2007Date published
I.S. EN 3491:2006227.
Aerospace series - Steel FE-PM3901 (X15CrNi17-3) - Air melted - Hardened andtempered - Forgings - De = 100 mm - 900 MPa = Rm = 1 100 MPa
7 FEBRUARY 2007Date published
Date: 18/07/2018 Page 17
-
I.S. EN 3507:2006228.
Aerospace series - Steel FE-PL1501 (30CrMo12) - Air melted - Hardened and tempered- Forgings - De = 100 mm - 930 MPa = Rm = 1 080 MPa
7 FEBRUARY 2007Date published
I.S. EN 3645-003:2006229.
Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threadedcoupling, operating temperature 175 °C or 200 °C continuous - Part 003: Receptaclesquare flange mounting - Product standard
7 FEBRUARY 2007Date published
I.S. EN 3645-004:2006230.
Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threadedcoupling, operating temperature 175 °C or 200 °C continuous - Part 004: Receptacle,hermetic, square flange mounting - Product standard
7 FEBRUARY 2007Date published
I.S. EN 3645-006:2006231.
Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threadedcoupling, operating temperature 175 °C or 200 °C continuous - Part 006: Protectivecover for receptacle - Product standard
7 FEBRUARY 2007Date published
I.S. EN 3645-009:2006232.
Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threadedcoupling, operating temperature 175 °C or 200 °C continuous - Part 009: Receptacle,round flange, jam nut mounting - Product standard
7 FEBRUARY 2007Date published
I.S. EN 3645-010:2006233.
Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threadedcoupling, operating temperature 175 °C or 200 °C continuous - Part 010: Receptacle,hermetic, round flange, jam nut mounting - Product standard
7 FEBRUARY 2007Date published
I.S. EN 3645-011:2006234.
Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threadedcoupling, operating temperature 175 °C or 200 °C continuous - Part 011: Lanyardrelease plug with grounding fingers - Type 1 - Product standard
7 FEBRUARY 2007Date published
I.S. EN 3645-012:2006235.
Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threadedcoupling, operating temperature 175 °C or 200 °C continuous - Part 012: Lanyardrelease plug with grounding fingers - Type 2 - Product standard
7 FEBRUARY 2007Date published
I.S. EN 3155-014:2006236.
Aerospace series - Electrical contacts used in elements of connection - Part 014:Contacts, electrical, male, type A, crimp, class S - Product standard
7 FEBRUARY 2007Date published
I.S. EN 3155-015:2006237.
Aerospace series - Electrical contacts used in elements of connection - Part 015:Contacts, electrical, female, type A, crimp, class S - Product standard
7 FEBRUARY 2007Date published
I.S. EN 4049-001:2006238.
Aerospace series - Thermocouple extension cable - Operating temperatures between -65 °C to 260 °C - Part 001: Technical specification
7 FEBRUARY 2007Date published
Date: 18/07/2018 Page 18
-
I.S. EN 4049-003:2006239.
Aerospace series - Thermocouple extension cable - Operating tempera-tures between -65 C to 260 C - Part 003: Single core nickel chro-mium/nickel aluminium - Productstandard
7 FEBRUARY 2007Date published
I.S. EN 4049-004:2006240.
Aerospace series - Thermocouple extension cable - Operating tempera-tures between -65 C to 260 C - Part 004: Two core nickel chro-mium/nickel aluminium shielded andjacketed - Product standard
7 FEBRUARY 2007Date published
I.S. EN 4057-100:2006241.
Aerospace series - Cable ties for harnesses - Test methods - Part 100: General7 FEBRUARY 2007Date published
I.S. EN 4057-302:2006242.
Aerospace series - Cable ties for harnesses - Test methods - Part 302: Flammability7 FEBRUARY 2007Date published
I.S. EN 4057-304:2006243.
Aerospace series - Cable ties for harnesses - Test methods - Part 304: Loop tensilestrength at maximum working temperature
7 FEBRUARY 2007Date published
I.S. EN 4057-306:2006244.
Aerospace series - Cable ties for harnesses - Test methods - Part 306: Heat ageing test7 FEBRUARY 2007Date published
I.S. EN 4057-307:2006245.
Aerospace series - Cable ties for harnesses - Test methods - Part 307: Resistance toultra violet radiation
7 FEBRUARY 2007Date published
I.S. EN 4057-401:2006246.
Aerospace series - Cable ties for harnesses - Test methods - Part 401: Loop tensilestrength
7 FEBRUARY 2007Date published
I.S. EN 4057-402:2006247.
Aerospace series - Cable ties for harnesses - Test methods - Part 402: Life cycle7 FEBRUARY 2007Date published
I.S. EN 4057-406:2006248.
Aerospace series - Cable ties for harnesses - Test methods - Part 406: Locking deviceretention
7 FEBRUARY 2007Date published
I.S. EN 3155-059:2006249.
Aerospace series - Electrical contacts used in elements of connection - Part 059:Contacts, electrical, coaxial, size 16, female, type D, solder, class R Product standard
7 FEBRUARY 2007Date published
I.S. EN 3155-030:2006250.
Aerospace series - Electrical contacts used in elements of connection - Part 030:Contacts, electrical, coaxial, shielded, size 12, male, type D, crimp, class R - Productstandard
7 FEBRUARY 2007Date published
Date: 18/07/2018 Page 19
-
I.S. EN 3155-031:2006251.
Aerospace series - Electrical contacts used in elements of connection - Part 031:Contacts, electrical, coaxial, shielded, size 12, female, type D, crimp, class R - Productstandard
7 FEBRUARY 2007Date published
I.S. EN 3716-005:2006252.
Aerospace series - Connector, single-way with triaxial interface, for transmission ofdigital data - Part 005: Crimp receptacle - Product standard
7 FEBRUARY 2007Date published
I.S. EN 3716-006:2006253.
Aerospace series - Cable ties for harnesses - Test methods - Part 406: Locking deviceretention
7 FEBRUARY 2007Date published
I.S. EN 3155-035:2006254.
Aerospace series - Electrical contacts used in elements of connection - Part 035:Contacts, electrical, triaxial, size 08, female, type D, crimp, class R - Product standard
7 FEBRUARY 2007Date published
I.S. EN 3645-005:2006255.
Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threadedcoupling, operating temperature 175 °C or 200 °C continuous - Part 005: Receptacle,hermetic, round flange, brasage mounting - Product standard
7 FEBRUARY 2007Date published
I.S. EN 45020:2006256.
Standardization and related activities - General vocabulary (ISO/IEC Guide 2:2004)7 FEBRUARY 2007Date published
I.S. EN 4057-404:2006257.
Aerospace series - Cable ties for harnesses - Test methods - Part 404: Low temperatureinstallation
7 FEBRUARY 2007Date published
I.S. EN ISO 12402-2:2006/LC:2006258.
Personal flotation devices - Part 2: Lifejackets, performance level 275 - Safetyrequirements (ISO 12402-2:2006)(incl. corrig.Oct.06)
7 FEBRUARY 2007Date published
I.S. EN ISO 18369-3:2006259.
Ophthalmic optics - Contact lenses - Part 3: Measurement methods (ISO 18369-3:2006)7 FEBRUARY 2007Date published
I.S. EN 13480-3:2002/LC:2006-11260.
Metallic industrial piping - Part 3: Design and calculation7 FEBRUARY 2007Date published
I.S. EN 13445-6:2002/LC:2006261.
Unfired pressure vessels - Part 6: Requirements for the design and fabrication ofpressure vessels and pressure parts constructed from spheroidal graphite cast iron(incl.corrig Dec.06)
7 FEBRUARY 2007Date published
I.S. EN ISO 13705:2006262.
Petroleum, petrochemical and natural gas industries - Fired heaters for general refineryservice (ISO 13705:2006)
24 JANUARY 2007Date published
Date: 18/07/2018 Page 20
-
I.S. EN 89:1999/A4:2006263.
Gas-fired storage water heaters for the production of domestic hot water24 JANUARY 2007Date published
I.S. EN ISO 22674:2006264.
Dentistry - Metallic materials for fixed and removable restorations and appliances (ISO22674:2006)
24 JANUARY 2007Date published
I.S. EN ISO 13850:2006265.
Safety of machinery - Emergency stop - Principles for design (ISO 13850:2006)24 JANUARY 2007Date published
I.S. EN 14509:2006266.
Self-supporting double skin metal faced insulating panels - Factory made products -Specifications
24 JANUARY 2007Date published
I.S. EN 14960:2006267.
Inflatable play equipment - Safety requirements and test methods24 JANUARY 2007Date published
I.S. EN ISO 11890-2:2006268.
Paints and varnishes - Determination of volatile organic compound (VOC) content - Part2: Gas-chromatographic method (ISO 11890-2:2006)
24 JANUARY 2007Date published
I.S. EN ISO 20776-1:2006269.
Clinical laboratory testing and in vitro diagnostic test systems -Susceptibility testing of infectious agents and evaluation of performance of antimicrobialsusceptibility test devices - Part 1: Reference method for testing the in vitro activity ofantimicrobial agents against rapidly growing aerobic bacteria involved in infectious
24 JANUARY 2007Date published
I.S. EN 12012-4:2006270.
Plastics and rubber machines - Size reduction machines - Part 4: Safety requirementsfor agglomerators
24 JANUARY 2007Date published
I.S. EN 469:2005/A1:2006271.
Protective clothing for firefighters - Performance requirements for protective clothing forfirefighting
24 JANUARY 2007Date published
I.S. EN 14688:2006272.
Sanitary appliances - Wash basins - Functional requirements and test methods24 JANUARY 2007Date published
I.S. EN ISO 21178:2006273.
Light conveyor belts - Determination of electrical resistances (ISO 21178:2005)24 JANUARY 2007Date published
I.S. EN ISO 21179:2006274.
Light conveyor belts - Determination of the electrostatic field generated by a runninglight conveyor belt (ISO 21179:2005)
24 JANUARY 2007Date published
I.S. EN ISO 21180:2006275.
Light conveyor belts - Determination of the maximum tensile strength (ISO 21180:2005)24 JANUARY 2007Date published
Date: 18/07/2018 Page 21
-
I.S. EN ISO 21181:2006276.
Light conveyor belts - Determination of the relaxed elastic modulus (ISO 21181:2005)24 JANUARY 2007Date published
I.S. EN ISO 21182:2006277.
Light conveyor belts - Determination of the coefficient of friction (ISO 21182:2005)24 JANUARY 2007Date published
I.S. EN ISO 21183-1:2006278.
Light conveyor belts - Part 1: Principal characteristics and applications (ISO 21183-1:2005)
24 JANUARY 2007Date published
I.S. EN ISO 21183-2:2006279.
Light conveyor belts - Part 2: List of equivalent terms (ISO 21183-2:2005)24 JANUARY 2007Date published
I.S. EN 545:2006280.
Ductile iron pipes, fittings, accessories and their joints for water pipelines -Requirements and test methods
24 JANUARY 2007Date published
I.S. EN ISO 389-5:2006281.
Acoustics - Reference zero for the calibration of audiometric equipment - Part 5:Reference equivalent threshold sound pressure levels for pure tones in the frequencyrange 8 kHz to 16 kHz (ISO 389-5:2006)
24 JANUARY 2007Date published
I.S. EN 14987:2006282.
Plastics - Evaluation of disposability in waste water treatment plants - Test scheme forfinal acceptance and specifications
24 JANUARY 2007Date published
I.S. EN ISO 1269:2006283.
Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of volatilematter (including water) (ISO 1269:2006)
24 JANUARY 2007Date published
I.S. EN ISO 21549-4:2006284.
Health informatics - Patient healthcard data - Part 4: Extended clinical data (ISO 21549-4:2006)
24 JANUARY 2007Date published
I.S. EN 15020:2006285.
Railway applications - Rescue coupler - Performance requirements, specific interfacegeometry and test methods
24 JANUARY 2007Date published
I.S. EN 14398-2:2003/A1:2006286.
Cryogenic vessels - Large transportable non-vacuum insulated vessels - Part 2: Design,fabrication, inspection and testing
24 JANUARY 2007Date published
I.S. EN 15192:2006287.
Characterisation of waste and soil - Determination of Chromium(VI) in solid material byalkaline digestion and ion chromatography with spectrophotometric detection
24 JANUARY 2007Date published
Date: 18/07/2018 Page 22
-
I.S. EN ISO 787-25:2006288.
General methods of test for pigments and extenders - Part 25: Comparison of thecolour, in full-shade systems, of white, black and coloured pigments - Colorimetricmethod (ISO 787-25:1993)
24 JANUARY 2007Date published
I.S. EN 14756:2006289.
Determination of the limiting oxygen concentration (LOC) for flammable gases andvapours
24 JANUARY 2007Date published
I.S. EN ISO 10405:2006290.
Petroleum and natural gas industries - Care and use of casing and tubing (ISO10405:2000)
24 JANUARY 2007Date published
I.S. EN 1731:2006291.
Personal eye protection - Mesh eye and face protectors24 JANUARY 2007Date published
I.S. EN ISO 24013:2006292.
Optics and photonics - Lasers and laser-related equipment - Measurement of phaseretardation of optical components for polarized laser radiation (ISO 24013:2006)
24 JANUARY 2007Date published
I.S. EN ISO 140-18:2006293.
Acoustics - Measurement of sound insulation in buildings and of building elements - Part18: Laboratory measurement of sound generated by rainfall on building elements (ISO140-18:2006)
24 JANUARY 2007Date published
I.S. EN 13981-4:2006294.
Aluminium and aluminium alloys - Products for structural railway applications - Technicalconditions for inspection and delivery - Part 4: Forgings
24 JANUARY 2007Date published
I.S. EN ISO 12402-7:2006295.
Personal flotation devices - Part 7: Materials and components - Safety requirements andtest methods (ISO 12402-7:2006)
24 JANUARY 2007Date published
I.S. EN 1123-2:2006296.
Pipes and fittings of longitudinally welded hot-dip galvanized steel tube with spigot andsocket for waste water systems - Part 2: Dimensions
24 JANUARY 2007Date published
I.S. CEN TR 15310-1:2006297.
Characterization of waste - Sampling of waste materials - Part 1: Guidance on selectionand application of criteria for sampling under various conditions
24 JANUARY 2007Date published
I.S. CEN TR 15310-2:2006298.
Characterization of waste - Sampling of waste materials - Part 2: Guidance on samplingtechniques
24 JANUARY 2007Date published
I.S. CEN TR 15310-3:2006299.
Characterization of waste - Sampling of waste materials - Part 3: Guidance onprocedures for sub-sampling in the field
24 JANUARY 2007Date published
Date: 18/07/2018 Page 23
-
I.S. CEN TR 15310-4:2006300.
Characterization of waste - Sampling of waste materials - Part 4: Guidance onprocedures for sample packaging, storage, preservation, transport and delivery
24 JANUARY 2007Date published
I.S. CEN TR 15310-5:2006301.
Characterization of waste - Sampling of waste materials - Part 5: Guidance on theprocess of defining the sampling plan
24 JANUARY 2007Date published
I.S. CEN TS 15523:2006302.
Postal service - Statement of mailing submission24 JANUARY 2007Date published
I.S. CEN TS 15525:2006303.
Postal Services - Standard Interfaces - Interface between Machine Control and BarCode Printers
24 JANUARY 2007Date published
I.S. CEN TR 15524:2006304.
Postal services - Customer-directed information including track and trace - Generalconcepts and definitions
24 JANUARY 2007Date published
I.S. EN ISO 3166-1:2006305.
Codes for the representation of names of countries and their subdivisions - Part 1:Country codes (ISO 3166-1:2006)
24 JANUARY 2007Date published
I.S. EN 61300-2-16:2006306.
Fibre optic interconnecting devices and passive components - Basic test andmeasurement procedures -- Part 2-16: Tests - Mould growth (IEC 61300-2-16:2006(EQV))
26 JANUARY 2007Date published
I.S. EN 61300-2-38:2006307.
Fibre optic interconnecting devices and passive components - Basic test andmeasurement procedures -- Part 2-38: Tests - Sealing for pressurized fibre opticclosures (IEC 61300-2-38:2006 (EQV))
26 JANUARY 2007Date published
I.S. EN 175301-801:2006308.
Detail Specification: High density rectangular connectors, round removable crimpcontacts
26 JANUARY 2007Date published
I.S. EN 62317-8:2006309.
Ferrite cores - Dimensions -- Part 8: E-cores (IEC 62317-8:2006 (EQV))26 JANUARY 2007Date published
I.S. EN 61204-7:2006310.
Low voltage power supplies, d.c. output -- Part 7: Safety requirements (IEC 61204-7:2006 (EQV))
26 JANUARY 2007Date published
I.S. EN 60384-13:2006/AC2006311.
Fixed capacitors for use in electronic equipment -- Part 13: Sectional specification -Fixed polypropylene film dielectric metal foil d.c. capacitors (IEC 60384-13:2006 (EQV))
26 JANUARY 2007Date published
Date: 18/07/2018 Page 24
-
I.S. EN 60384-13-1:2006/AC:2006312.
Fixed capacitors for use in electronic equipment -- Part 13-1: Blank detail specification -Fixed polypropylene film dielectric metal foil d.c. capacitors - Assessment level E (IEC60384-13-1:2006 (EQV))
26 JANUARY 2007Date published
I.S. EN 60384-19:2006/AC:2006313.
Fixed capacitors for use in electronic equipment -- Part 19: Sectional specification -Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors(IEC 60384-19:2006 (EQV))
26 JANUARY 2007Date published
I.S. EN 60384-19-1:2006/AC:2006314.
Fixed capacitors for use in electronic equipment -- Part 19-1: Blank detail specification -Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors- Assessment level EZ (IEC 60384-19-1:2006 (EQV))
26 JANUARY 2007Date published
I.S. EN 60034-26:2006315.
Rotating electrical machines -- Part 26: Effects of unbalanced voltages on theperformance of three-phase cage induction motors (IEC 60034-26:2006 (EQV))
26 JANUARY 2007Date published
I.S. EN 61300-3-29:2006/AC:2006316.
Fibre optic interconnecting devices and passive components - Basic test andmeasurement procedures -- Part 3-29: Examinations and measurements - Measurementtechniques for characterizing the amplitude of the spectral transfer function of DWDMcomponents (IEC 61300-3-29:2005 (EQV))
26 JANUARY 2007Date published
I.S. EN 61937-5:2006317.
Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC60958 -- Part 5: Non-linear PCM bitstreams according to the DTS (Digital TheaterSystems) format(s) (IEC 61937-5:2006 (EQV))
26 JANUARY 2007Date published
I.S. EN 61163-1:2006318.
Reliability stress screening -- Part 1: Repairable assemblies manufactured in lots (IEC61163-1:2006 (EQV))
26 JANUARY 2007Date published
I.S. EN 62271-100:2001/a2:2006/AC:2006319.
High-voltage switchgear and controlgear -- Part 100: High-voltage alternating-currentcircuit-breakers (IEC 62271-100:2001/A2:2006 (EQV))
26 JANUARY 2007Date published
I.S. EN 62271-201:2006/AC:2006320.
High-voltage switchgear and controlgear -- Part 201: AC insulation-enclosed switchgearand controlgear for rated voltages above 1 kV and up to and including 52 kV (IEC 62271-201:2006 (EQV))
26 JANUARY 2007Date published
I.S. EN 62217:2006/AC:2006321.
Polymeric insulators for indoor and outdoor use with a nominal voltage > 1 000 V -General definitions, test methods and acceptance criteria (IEC 62217:2005 (EQV))
26 JANUARY 2007Date published
I.S. EN 61033:2006322.
Test methods for the determination of bond strength of impregnating agents to anenamelled wire substrate (IEC 61033:1991 (EQV) + A1:2006 (EQV))
26 JANUARY 2007Date published
Date: 18/07/2018 Page 25
-
I.S. EN 60464-2:2001/A1:2006323.
Varnishes used for electrical insulation -- Part 2: Methods of test (IEC 60464-2:2001/A1:2006 (EQV))
26 JANUARY 2007Date published
I.S. EN 61000-4-12:2006324.
Electromagnetic compatibility (EMC) -- Part 4-12: Testing and measurement techniques- Ring wave immunity test (IEC 61000-4-12:2006 (EQV))
26 JANUARY 2007Date published
I.S. EN 61672-3:2006325.
Electroacoustics - Sound level meters -- Part 3: Periodic tests (IEC 61672-3:2006(EQV))
26 JANUARY 2007Date published
I.S. EN 60317-0-6:2001/A1:2006326.
Specifications for particular types of winding wires -- Part 0-6: General requirements -Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire(IEC 60317-0-6:2001/A1:2006 (EQV))
26 JANUARY 2007Date published
I.S. EN 61326-2-4:2006327.
Electrical equipment for measurement, control and laboratory use - EMC requirements --Part 2-4: Particular requirements - Test configurations, operational conditions andperformance criteria for insulation monitoring devices according to IEC 61557-8 and forequipment for insulation fault location according to IEC 61557-9 (IEC 61326-2-4:2006
26 JANUARY 2007Date published
I.S. EN 60118-4:2006328.
Electroacoustics - Hearing aids -- Part 4: Induction loop systems for hearing aidpurposes - Magnetic field strength (IEC 60118-4:2006 (EQV))
26 JANUARY 2007Date published
I.S. EN 60947-4-2:2000/A2:2006329.
Low-voltage switchgear and controlgear -- Part 4-2: Contactors and motor-starters - ACsemiconductor motor controllers and starters (IEC 60947-4-2:1999/A2:2006 (EQV))
26 JANUARY 2007Date published
I.S. EN 60947-4-3:2000/A1:2006330.
Low-voltage switchgear and controlgear -- Part 4-3: Contactors and motor-starters - ACsemiconductor controllers and contactors for non-motor loads (IEC 60947-4-3:1999/A1:2006 (EQV))
26 JANUARY 2007Date published
I.S. EN 60947-5-8:2006331.
Low-voltage switchgear and controlgear -- Part 5-8: Control circuit devices and switchingelements - Three-position enabling switches (IEC 60947-5-8:2006 (EQV))
26 JANUARY 2007Date published
I.S. EN 61788-7:2006332.
Superconductivity -- Part 7: Electronic characteristic measurements - Surface resistanceof superconductors at microwave frequencies (IEC 61788-7:2006 (EQV))
26 JANUARY 2007Date published
I.S. EN 61212-2:2006333.
Insulating materials - Industrial rigid round laminated tubes and rods based onthermosetting resins for electrical purposes -- Part 2: Methods of test (IEC 61212-2:2006(EQV))
26 JANUARY 2007Date published
Date: 18/07/2018 Page 26
-
I.S. EN 62343-1-3:2006334.
Dynamic modules -- Part 1-3: Performance standards - Dynamic gain tilt equalizer withpigtails for use in controlled environments (Category C) (IEC 62343-1-3:2006 (EQV))
26 JANUARY 2007Date published
I.S. EN 60512-9-3:2006/AC:2006335.
Connectors for electronic equipment - Tests and measurements -- Part 9-3: Endurancetests - Test 9c: Mechanical operation (engaging/separating) with electrical load (IEC60512-9-3:2006 (EQV))
26 JANUARY 2007Date published
I.S. EN 60929:2006/AC:2006336.
AC-supplied electronic ballasts for tubular fluorescent lamps - Performancerequirements (IEC 60929:2006 (EQV))
26 JANUARY 2007Date published
I.S. EN 55016-1-2:2004/A2:2006337.
Specification for radio disturbance and immunity measuring apparatus and methods --Part 1-2: Radio disturbance and immunity measuring apparatus - Ancillary equipment -Conducted disturbances (CISPR 16-1-2:2003/A2:2006 (EQV))
26 JANUARY 2007Date published
I.S. EN 60335-2-15:2005/AC:2006338.
Household and similar electrical appliances - Safety -- Part 2-15: Particular requirementsfor appliances for heating liquids (IEC 60335-2-15:2002 (EQV))
30 MAY 2007Date published
I.S. EN 62271-109:2006339.
High-voltage switchgear and controlgear -- Part 109: Alternating-current series capacitorby-pass switches (IEC 62271-109:2006 (EQV))
26 JANUARY 2007Date published
I.S. EN 60512-12-2:2006/AC:2006340.
Connectors for electronic equipment - Tests and measurements -- Part 12-2: Solderingtests - Test 12b: Solderability, wetting, soldering iron method (IEC 60512-12-2:2006(EQV))
26 JANUARY 2007Date published
I.S. EN 60512-12-3:2006/AC:2006341.
Connectors for electronic equipment - Tests and measurements -- Part 12-3: Solderingtests - Test 12c: Solderability, de-wetting (IEC 60512-12-3:2006 (EQV))
26 JANUARY 2007Date published
I.S. EN 60512-12-4:2006/AC:2006342.
Connectors for electronic equipment - Tests and measurements -- Part 12-4: Solderingtests - Test 12d: Resistance to soldering heat, solder bath method (IEC 60512-12-4:2006 (EQV))
26 JANUARY 2007Date published
I.S. EN 60512-12-5:2006/AC:2006343.
Connectors for electronic equipment - Tests and measurements -- Part 12-5: Solderingtests - Test 12e: Resistance to soldering heat, soldering iron method (IEC 60512-12-5:2006 (EQV))
26 JANUARY 2007Date published
I.S. EN 61076-3-106:2006344.
Connectors for electronic equipment - Product requirements -- Part 3-106: Rectangularconnectors - Detail specification for protective housings for use with 8-way shielded andunshielded connectors for industrial environments incorporating the IEC 60603-7 seriesinterface (IEC 61076-3-106:2006 (EQV))
26 JANUARY 2007Date published
Date: 18/07/2018 Page 27
-
I.S. EN 60670-22:2006345.
Boxes and enclosures for electrical accessories for household and similar fixed electricalinstallations -- Part 22: Particular requirements for connecting boxes and enclosures(IEC 60670-22:2003 (MOD))
26 JANUARY 2007Date published
I.S. EN 62308:2006346.
Equipment reliability - Reliability assessment methods (IEC 62308:2006 (EQV))26 JANUARY 2007Date published
I.S. EN 55016-2-3:2006347.
Specification for radio disturbance and immunity measuring apparatus and methods --Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbancemeasurements (CISPR 16-2-3:2006 (EQV))
26 JANUARY 2007Date published
I.S. EN 55014-1:2006348.
Electromagnetic compatibility - Requirements for household appliances, electric toolsand similar apparatus -- Part 1: Emission (CISPR 14-1:2005 (EQV))
26 JANUARY 2007Date published
I.S. EN 55015:2006349.
Limits and methods of measurement of radio disturbance characteristics of electricallighting and similar equipment (CISPR 15:2005 (EQV))
26 JANUARY 2007Date published
I.S. CLC TS 61111:2006350.
Matting of insulating material for electrical purposes (IEC 61111:1992 (EQV) + A1:2002(EQV) + corrigendum May 2000 (EQV))
26 JANUARY 2007Date published
I.S. EN 62290-1:2006351.
Railway applications - Urban guided transport management and command/controlsystems -- Part 1: System principles and fundamental concepts (IEC 62290-1:2006(EQV))
26 JANUARY 2007Date published
I.S. CLC TS 61112:2006352.
Blankets of insulating material for electrical purposes (IEC 61112:1992 (EQV) + A1:2002(EQV) + corrigendum May 2000 (EQV))
26 JANUARY 2007Date published
I.S. EN 61241-0:2006353.
Electrical apparatus for use in the presence of combustible dust -- Part 0: Generalrequirements (IEC 61241-0:2004 (MOD) + corrigendum Nov. 2005 (EQV))
26 JANUARY 2007Date published
S.R. IEC TR 61010-3:2006354.
Safety requirements for electrical equipment for measurement, control, and laboratoryuse – Part 3: Protocol for the preparation of conformity verification reports for the IEC61010 2nd edition series
12 FEBRUARY 2007Date published
S.R. IEC TR 61010-3-1:2006355.
Safety requirements for electrical equipment for measurement, control, and laboratoryuse – Part 3-1: Conformity verification report for IEC 61010-1:2001 - Generalrequirements
12 FEBRUARY 2007Date published
I.S. 380:2007356.
Beauty and holistic therapy - Management of training centres23 MARCH 2007Date published
Date: 18/07/2018 Page 28
-
I.S. EN ISO 14224:2006357.
Petroleum, petrochemical and natural gas industries - Collection and exchange ofreliability and maintenance data for equipment(ISO 14224:2006)
16 FEBRUARY 2007Date published
I.S. EN 13445-1:2002/A2:2006358.
Unfired pressure vessels - Part 1: General16 FEBRUARY 2007Date published
I.S. EN 13445-2:2002/A2:2006359.
Unfired pressure vessels - Part 2: Materials16 FEBRUARY 2007Date published
I.S. EN 13445-3:2002/A11:2006360.
Unfired pressure vessels - Part 3: Design16 FEBRUARY 2007Date published
I.S. EN 13445-4:2002/A2:2006361.
Unfired pressure vessels - Part 4: Fabrication16 FEBRUARY 2007Date published
I.S. EN 13445-5:2002/A4:2006362.
Unfired pressure vessels - Part 5: Inspection and testing16 FEBRUARY 2007Date published
I.S. EN 14438:2006363.
Gas-fired insets for heating more than one room16 FEBRUARY 2007Date published
I.S. EN 14411:2006364.
Ceramic tiles - Definitions, classification, characteristics and marking16 FEBRUARY 2007Date published
I.S. EN 14975:2006365.
Loft ladders - Requirements, marking and testing16 FEBRUARY 2007Date published
I.S. EN ISO 14505-2:2006366.
Ergonomics of the thermal environment - Evaluation of thermal environments in vehicles- Part 2: Determination of equivalent temperature (ISO 14505-2:2006)
16 FEBRUARY 2007Date published
I.S. EN 546-1:2007367.
Aluminium and aluminium alloys - Foil - Part 1: Technical conditions for inspection anddelivery
16 FEBRUARY 2007Date published
I.S. EN 546-2:2007368.
Aluminium and aluminium alloys - Foil - Part 2: Mechanical properties16 FEBRUARY 2007Date published
I.S. EN 546-3:2007369.
Aluminium and aluminium alloys - Foil - Part 3: Tolerances on dimensions16 FEBRUARY 2007Date published
I.S. EN 546-4:2007370.
Aluminium and aluminium alloys - Foil - Part 4: Special property requirements16 FEBRUARY 2007Date published
I.S. EN 683-1:2006371.
Aluminium and aluminium alloys - Finstock - Part 1: Technical conditions for inspectionand delivery
16 FEBRUARY 2007Date published
Date: 18/07/2018 Page 29
-
I.S. EN 683-2:2006372.
Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties16 FEBRUARY 2007Date published
I.S. EN 683-3:2006373.
Aluminium and aluminium alloys - Finstock - Part 3: Tolerances on dimensions and form16 FEBRUARY 2007Date published
I.S. EN ISO 8501-4:2007374.
Preparation of steel substrates before application of paints and related products - Visualassessment of surface cleanliness - Part 4: Initial surface conditions, preparation gradesand flash rust grades in connection with high-pressure water jetting (ISO8501-4:2006)
21 FEBRUARY 2007Date published
I.S. EN 927-3:2006375.
Paints and varnishes - Coating materials and coating systems for exterior wood - Part 3:Natural weathering test
16 FEBRUARY 2007Date published
I.S. EN 927-5:2006376.
Paints and varnishes - Coating materials and coating systems for exterior wood - Part 5:Assessment of the liquid water permeability
16 FEBRUARY 2007Date published
I.S. EN ISO 1522:2006377.
Paints and varnishes - Pendulum damping test (ISO 1522:2006)16 FEBRUARY 2007Date published
I.S. EN 12923-1:2006378.
Advanced technical ceramics - Monolithic ceramics - Part 1: General practice forundertaking corrosion tests
16 FEBRUARY 2007Date published
I.S. CEN TR 15545:2006379.
Guide to the use of EN 54516 FEBRUARY 2007Date published
I.S. EN ISO 5667-1:2006380.
Water quality - Sampling - Part 1: Guidance on the design of sampling programmes andsampling techniques (ISO 5667- 1:2006)
16 FEBRUARY 2007Date published
I.S. EN 13758-2:2003+A1:2006381.
Textiles - Solar UV protective properties - Part 2: Classification and marking of apparel16 FEBRUARY 2007Date published
I.S. EN 13758-1:2001+A1:2006382.
Textiles - Solar UV protective properties - Part 1: Method of test for apparel fabrics16 FEBRUARY 2007Date published
I.S. EN ISO 5659-2:2006383.
Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test (ISO 5659-2:2006)
16 FEBRUARY 2007Date published
I.S. EN ISO 1874-2:2006384.
Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of testspecimens and determination of properties (ISO 1874-2:2006)
16 FEBRUARY 2007Date published
Date: 18/07/2018 Page 30
-
I.S. EN ISO 180:2000/A1:2006385.
Plastics - Determination of Izod impact strength - Amendment 1 (ISO 180:2000/Amd1:2006)
16 FEBRUARY 2007Date published
I.S. CEN TS 15568:2006386.
Foodstuffs - Methods of analysis for the detection of genetically modified organisms andderived products - Sampling strategies
16 FEBRUARY 2007Date published
I.S. EN ISO 2692:2006387.
Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum materialrequirement (MMR), least material requirement (LMR) and reciprocity requirement(RPR) (ISO 2692:2006)
16 FEBRUARY 2007Date published
I.S. EN 14346:2006388.
Characterization of waste - Calculation of dry matter by determination of dry residue orwater content
16 FEBRUARY 2007Date published
I.S. EN ISO 10535:2006389.
Hoists for the transfer of disabled persons - Requirements and test methods (ISO10535:2006)
16 FEBRUARY 2007Date published
I.S. EN 4158:2006390.
Aerospace series - Paints and varnishes - Test method for measurement of electricalsurface resistance of conductive layers
16 FEBRUARY 2007Date published
I.S. EN 4003:2006391.
Aerospace series - Aluminium alloy AL-P2219-T87 - Sheet andstrip 0,5 mm = a = 6 mm
16 FEBRUARY 2007Date published
I.S. EN 4530-005:2006392.
Aerospace series - Sealing sleeves used in elements of connection - Part 005: Sealingsleeves for external diameter cable 3 mm to 4,1 mm - Product standard
16 FEBRUARY 2007Date published
I.S. EN 4530-006:2006393.
Aerospace series - Sealing sleeves used in elements of connection - Part 006: Sealingsleeves for external diameter cable 4,68 mm to 5,05 mm - Product standard
16 FEBRUARY 2007Date published
I.S. EN 3375-006:2006394.
Aerospace series - Cable, electrical, for digital data transmission - Part 006: Single braid- 78 Ohms - Type XM - Product standard
16 FEBRUARY 2007Date published
I.S. EN 3375-007:2006395.
Aerospace series - Cable, electrical, for digital data transmission - Part 007: Doublebraid - 77 Ohms - Type WW - Product standard
16 FEBRUARY 2007Date published
I.S. EN 4008-017:2006396.
Aerospace series - Elements of electrical and optical connection - Crimping tools andassociated accessories - Part 017: Head for crimping tool M22520/4-01 - Productstandard
16 FEBRUARY 2007Date published
Date: 18/07/2018 Page 31
-
I.S. EN 4108:2006397.
Aerospace series - Wrenches, crow foot, attachment socket, socket drive16 FEBRUARY 2007Date published
I.S. EN 4109:2006398.
Aerospace series - Wrenches, face spanner16 FEBRUARY 2007Date published
I.S. EN 4110:2006399.
Aerospace series - Wrenches, open end, box16 FEBRUARY 2007Date published
I.S. EN 4354:2006400.
Aerospace series - Six lobe recess - Drivers, relieved16 FEBRUARY 2007Date published
I.S. EN 4356:2006401.
Aerospace series - Six lobe recess - Drivers, short16 FEBRUARY 2007Date published
I.S. EN 4357:2006402.
Aerospace series - Six lobe recess - Drivers, handle16 FEBRUARY 2007Date published
I.S. EN 4358:2006403.
Aerospace series - Six lobe recess - Drivers, double ended, 9016 FEBRUARY 2007Date published
I.S. EN 4359:2006404.
Aerospace series - Six lobe recess - Drivers - Technical specification16 FEBRUARY 2007Date published
I.S. EN 2947:2006405.
Aerospace series - Steel FE-PA3004 (X10CrNi18-09) - Air melted - Non heat treated -Cold drawn wire - a or D = 2,3 mm
16 FEBRUARY 2007Date published
I.S. EN 3114-001:2006406.
Aerospace series - Test method - Microstructure of (a + ß) titanium alloy wroughtproducts - Part 001: General requirements
16 FEBRUARY 2007Date published
I.S. EN 3114-003:2006407.
Aerospace series - Test method - Microstructure of (a + ß) titanium alloy wroughtproducts - Part 003: Microstructure of plate
16 FEBRUARY 2007Date published
I.S. EN 3114-004:2006408.
Aerospace series - Test method - Microstructure of (a + ß) titanium alloy wroughtproducts - Part 004: Microstructure of sheet for superplastic forming
16 FEBRUARY 2007Date published
I.S. EN 3668:2006409.
Aerospace series - Heat resisting alloy NI-PH2301 (NiCr21Fe18Mo9) - Non heat treated- Forging stock - a or D = 250 mm
16 FEBRUARY 2007Date published
I.S. EN 3816:2006410.
Aerospace series - Steel FE-PA3601 (X6CrNiTi18-10) - Air melted - Softened and coldrolled - Sheet and strip a = 3 mm - Rm = 800 MPa
16 FEBRUARY 2007Date published
Date: 18/07/2018 Page 32
-
I.S. EN 3969:2006411.
Aerospace series - Steel FE-PL1507 (40CrMoV12) - Air melted - Annealed - Forgingstock - a or D = 350 mm
16 FEBRUARY 2007Date published
I.S. EN 3971:2006412.
Aerospace series - Steel FE-PL1507 (40CrMoV12) - Consumable electrode remelted -Annealed - Forging stock - a or D = 350 mm
16 FEBRUARY 2007Date published
I.S. EN 3972:2006413.
Aerospace series - Steel FE-PL1507 (40CrMoV12) - Consumable electrode remelted -Hardened and tempered - Bar for machining - De = 50 mm - 1 250 MPa = Rm = 1 400MPa
16 FEBRUARY 2007Date published
I.S. EN 3973:2006414.
Aerospace series - Steel FE-CM3801 (X5CrNiCuNb16-4) - Homogenized, solutiontreated and precipitation hardened - Investment casting - De = 50 mm - Rm = 1 030MPa
16 FEBRUARY 2007Date published
I.S. EN 3976:2006415.
Aerospace series - Titanium and titanium alloys - Test method - Chemical analysis forthe determination of hydrogen content
16 FEBRUARY 2007Date published
I.S. EN 4382:2006416.
Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) - Solution treated -Seamless tubes - For hydraulic application - D = 50 mm, a = 3 mm
16 FEBRUARY 2007Date published
I.S. EN 4383:2006417.
Aerospace series - Heat resisting alloy NI-CH2601 (NiCr19Fe19Nb5Mo3) - Non heattreated - Remelting stock
16 FEBRUARY 2007Date published
I.S. EN ISO 21487:2006418.
Small craft - Permanently installed petrol and diesel fuel tanks (ISO 21487:2006)16 FEBRUARY 2007Date published
I.S. EN ISO 7500-2:2006419.
Metallic materials - Verification of static uniaxial testing machines - Part 2: Tensioncreep testing machines - Verification of the applied force (ISO 7500-2:2006)
16 FEBRUARY 2007Date published
I.S. EN 10021:2006420.
General technical delivery conditions for steel products16 FEBRUARY 2007Date published
I.S. CWA 15627:2006421.
Small Punch Test Method for Metallic Materials16 FEBRUARY 2007Date published
NA to I.S. EN 1991-1-2:2002-2014-07422.
Irish National Annex to Eurocode 1: Actions on structures - Part 1-2: General actions -Actions on structures exposed to fire
6 FEBRUARY 2007Date published
Date: 18/07/2018 Page 33
-
I.S. EN 3545-005:2006/LC:2006423.
Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear,plastic housing, locking device, operating temperatures - 55 oC to 175 oC - Part 005:Female coding and attachment System for mounting on free housing(plug) - Product standard(incl.corrig Oct. 06)
7 FEBRUARY 2007Date published
I.S. EN 14492-1:2006/LC:2006424.
Cranes - Power driven winches and hoists - Part 1: Power driven winches(incl. corrigNov.06)
7 FEBRUARY 2007Date published
I.S. EN ISO/IEC 17021:2006/LC:2006425.
Conformity assessment - Requirements for bodies providing audit and certification ofmanagement systems (ISO/IEC 17021:2006)(incl. corrig Nov 06)
7 FEBRUARY 2007Date published
I.S. EN 14876:2007426.
Transportable gas cylinders - Periodic inspection and testing of welded steel pressuredrums
21 FEBRUARY 2007Date published
I.S. EN 383:2007427.
Timber Structures - Test methods - Determination of embedment strength andfoundation values for dowel type fasteners
21 FEBRUARY 2007Date published
I.S. EN 14390:2007428.
Fire test - Large-scale room reference test for surface products21 FEBRUARY 2007Date published
I.S. EN 161:2007429.
Automatic shut-off valves for gas burners and gas appliances21 FEBRUARY 2007Date published
I.S. EN 13501-4:2007430.
Fire classification of construction products and building elements - Part 4: Classificationusing data from fire resistance tests on components of smoke control systems
21 FEBRUARY 2007Date published
I.S. EN 570:2007431.
Aluminium and aluminium alloys - Impact extrusion slugs obtained from wroughtproducts - Specification
21 FEBRUARY 2007Date published
I.S. EN 1396:2007432.
Aluminium and aluminium alloys - Coil coated sheet and strip for general applications -Specifications
21 FEBRUARY 2007Date published
I.S. EN ISO 2812-3:2007433.
Paints and varnishes - Determination of resistance to liquids - Part 3: Method using anabsorbent medium (ISO 2812-3:2007)
21 FEBRUARY 2007Date published
I.S. EN ISO 2812-4:2007434.
Paints and varnishes - Determination of resistance to liquids - Part 4: Spotting methods(ISO 2812-4:2007)
21 FEBRUARY 2007Date published
Date: 18/07/2018 Page 34
-
I.S. EN ISO 2812-5:2007435.
Paints and varnishes - Determination of resistance to liquids - Part 5: Temperature-gradient oven method (ISO 2812-5:2007)
21 FEBRUARY 2007Date published
I.S. EN ISO 2812-1:2007436.
Paints and varnishes - Determination of resistance to liquids - Part 1: Immersion inliquids other than water (ISO 2812-1:2007)
21 FEBRUARY 2007Date published
I.S. EN ISO 2812-2:2007437.
Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersionmethod (ISO 2812-2:2007)
21 FEBRUARY 2007Date published
I.S. CEN TR 15438:2007438.
Plastics piping systems - Guidance for coding of products and their intended uses21 FEBRUARY 2007Date published
I.S. EN ISO 17249:2004/A1:2007439.
Safety footwear with resistance to chain saw cutting - Amendment 1 (ISO17249:2004/Amd 1:2007)
21 FEBRUARY 2007Date published
I.S. EN 725-3:2007440.
Advanced technical ceramics - Methods of test for ceramic powders - Part 3:Determination of the oxygen content of nonoxides by thermal extraction with a carriergas
21 FEBRUARY 2007Date published
I.S. EN 725-5:2007441.
Advanced technical ceramics - Methods of test for ceramic powders - Part 5:Determination of particle size distribution
21 FEBRUARY 2007Date published
I.S. EN 14236:2007442.
Ultrasonic domestic gas meters21 FEBRUARY 2007Date published
I.S. EN 15206:2007443.
Vitreous and porcelain enamels - Production of specimens for testing enamel on sheetsteel, sheet aluminium and cast iron
21 FEBRUARY 2007Date published
I.S. EN 1473:2007444.
Installation and equipment for liquefied natural gas - Design of onshore installations21 FEBRUARY 2007Date published
I.S. EN ISO 15302:2007445.
Animal and vegetable fats and oils - Determination of benzo[a]pyrene content - Reverse-phase high-performance liquid chromatography method (ISO 15302:1998)
21 FEBRUARY 2007Date published
I.S. EN 14316-2:2007446.
Thermal insulating products for buildings - In-situ thermal insulation formed fromexpanded perlite (EP) products - Part 2: Specification for the installed products
21 FEBRUARY 2007Date published
I.S. EN 14317-2:2007447.
Thermal insulation products for buildings - In-situ thermal insulation formed fromexfoliated vermiculite (EV) products - Part 2: Specification for the installed products
21 FEBRUARY 2007Date published
Date: 18/07/2018 Page 35
-
I.S. EN 624:2000/A2:2007448.
Specification for dedicated LPG appliances - Room sealed LPG space heatingequipment for installation in vehicles and boats
21 FEBRUARY 2007Date published
I.S. EN 14420-1:2004+A1:2007449.
Hose fittings with clamp units - Part 1: Requirements, survey, designation and testing21 FEBRUARY 2007Date published
I.S. EN 14420-4:2004+A1:2007450.
Hose fittings with clamp units - Part 4: Flange connections21 FEBRUARY 2007Date published
I.S. EN 14420-6:2004+A1:2007451.
Hose fittings with clamp units - Part 6: TW tank truck couplings21 FEBRUARY 2007Date published
I.S. EN 14420-7:2004+A1:2007452.
Hose fittings with clamp units - Part 7: Cam locking couplings21 FEBRUARY 2007Date published
I.S. EN 14420-8:2004+A1:2007453.
Hose fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin system)21 FEBRUARY 2007Date published
I.S. EN 1395-1:2007454.
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 1:General requirements
21 FEBRUARY 2007Date published
I.S. EN 1395-2:2007455.
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 2:Flame spraying including HVOF
21 FEBRUARY 2007Date published
I.S. EN 1395-3:2007456.
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 3: Arcspraying
21 FEBRUARY 2007Date published
I.S. EN 1395-4:2007457.
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 4:Plasma spraying
21 FEBRUARY 2007Date published
I.S. EN 1395-5:2007458.
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 5:Plasma spraying in chambers
21 FEBRUARY 2007Date published
I.S. EN 1395-6:2007459.
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 6:Manipulator systems
21 FEBRUARY 2007Date published
I.S. EN 1395-7:2007460.
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 7:Powder feed systems
21 FEBRUARY 2007Date published
I.S. EN 1482-1:2007461.
Fertilizers and liming materials - Sampling and sample preparation - Part 1: Sampling21 FEBRUARY 2007Date published
Date: 18/07/2018 Page 36
-
I.S. EN 1482-2:2007462.
Fertilizers and liming materials - Sampling and sample preparation - Part 2: Samplepreparation
21 FEBRUARY 2007Date published
I.S. EN 12972:2007463.
Tanks for transport of dangerous goods - Testing, inspection and marking of metallictanks
21 FEBRUARY 2007Date published
I.S. EN 10280:2001+A1:2007464.
Magnetic materials - Methods of measurement of the magnetic properties of electricalsheet and strip by means of a single sheet tester
21 FEBRUARY 2007Date published
I.S. HD 488 S1:1987465.
Gassing of insulating liquids under electrical stress and ionization (IEC 60628:1985(EQV))
24 FEBRUARY 2007Date published
I.S. HD 382 S1:1979466.
Determination of the aromatic hydrocarbon content of new mineral insulating oils (IEC60590:1977 (EQV))
24 FEBRUARY 2007Date published
I.S. HD 415 S1:1981467.
Detection and determination of specified anti-oxidant additives in insulating oils (IEC60666:1979 (EQV))
24 FEBRUARY 2007Date published
I.S. HD 582 S1:1991468.
Specification for unused polybutenes (IEC 60963:1988 (EQV))24 FEBRUARY 2007Date published
I.S. HD 565 S1:1993469.
Specifications for silicone liquids for electrical purposes (IEC 60836:1988 (EQV))24 FEBRUARY 2007Date published
I.S. HD 618 S1:1992470.
General classification of insulating liquids (IEC 61039:1990 (EQV))24 FEBRUARY 2007Date published
I.S. HD 428.1 S1:1992471.
Three-phase oil-immersed distribution transformers 50 Hz, from 50 to 2500 kVA withhighest voltage for equipment not exceeding 36 kV -- Part 1: General requirements andrequirements for transformers with highest voltage for equipment not exceeding 24 kV
24 FEBRUARY 2007Date published
I.S. HD 428.2.1 S1:1994472.
Three phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2,5 MVA withhighest voltage for equipment not exceeding 36 kV -- Part 2: Distribution transformerswith cable boxes on the high-voltage and/or low-voltage side -- Section 1: Generalrequirements
24 FEBRUARY 2007Date published
I.S. HD 428.3 S1:1994473.
Three-phase oil-immersed distribution transformers 50 Hz, from 50 to 2500 kVA, withhighest voltage for equipment not exceeding 36 kV -- Part 3: Supplementaryrequirements for transformers with highest voltage for equipment equal to 36 kV
24 FEBRUARY 2007Date published
Date: 18/07/2018 Page 37
-
I.S. HD 428.4 S1:1994474.
Three phase oil-immersed distribution transformers 50 Hz, from 50 to 2500 kVA withhighest voltage for equipment not exceeding 36 kV -- Part 4: Determination of the powerrating of a transformer loaded with non-sinusoidal currents
24 FEBRU