IRISH STANDARDS PUBLISHED BASED ON CEN/CENELEC … · Rubber hoses and hose assemblies for...

IRISH STANDARDS PUBLISHED BASED ON CEN/CENELEC STANDARDS

I.S. EN 2336:1988/AC1:19881.

Aerospace Series - Bearings, Spherical Plain in Steel with Assembly Slots - Dimensionsand Loads

1 JANUARY 2006Date published

I.S. EN 28378-1:1989/AC1:19892.

Information Processing - Data Interchange on 130 mm (5.25") Flexible Disk CartridgesUsing Modified Frequency Modulation Recording at 7958 ftprad, 3.8 tpmm (96 tpi), onBoth Sides -Part 1: Dimensional, Physical and Magnetic Characteristics. (ISO 8378-1, 1st Edition,


I.S. HD 1215-2:1988/AC1:19893.

Thermostatic Radiator Valves - Part 2 : Dimensions and Details on Connection


I.S. EN 50203:1996/A1:19994.

Automatic channel installation (ACI)

2 FEBRUARY 2006Date published

I.S. EN 54-2:19995.

Fire detection and fire alarm systems -Part 2: Control and indicating equipment


I.S. EN 12737:20046.

Precast concrete products - Floor slats for livestock

28 JULY 2006Date published

I.S. EN 61009-1:1994/A13:20047.

Electrical accessories - Residual current operated circuit-breakers with integralovercurrent protection for household and similar uses (RCBO's) -- Part 1: General rules


I.S. EN 50091-1-1:20048.

Uninterruptible power systems (UPS) -- Part 1-1: General and safety requirements forUPS used in operator access areas


I.S. EN 60432-1:20049.

Incandescent lamps - Safety specifications -- Part 1: Tungsten filament lamps fordomestic and similar general lighting purposes (IEC 60432-1:1999 (MOD))


I.S. EN 61131-2:1994/A12:200410.

Programmable controllers -- Part 2: Equipment requirements and tests


I.S. EN 60335-2-35:1998/A1:200411.

Safety of household and similar electrical appliances -- Part 2-35: Particularrequirements for instantaneous water heaters (IEC 60335-2-35:1997/A1:1999 (EQV))


I.S. EN 61360-2:2002/A1:200412.

Standard data element types with associated classification scheme for electriccomponents -- Part 2: EXPRESS dictionary schema (IEC 61360-2:2002/A1:2003 (EQV))


Date: 18/07/2018

I.S. EN 1993-1-1:200513.

Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings

10 MAY 2006Date published

I.S. EN 13748-1:2004/A1:200514.

Terrazzo tiles - Part 1: Terrazzo tiles for internal use


I.S. EN 1994-1-2:200515.

Eurocode 4 - Design of composite steel and concrete structures - Part 1-2: Generalrules - Structural fire design

30 DECEMBER 2006Date published

I.S. EN ISO 13792:200516.

Thermal performance of buildings - Calculation of internal temperatures of a room insummer without mechanical cooling - Simplified methods (ISO 13792:2005)


I.S. EN ISO 4628-8:200517.

Paints and varnishes - Evaluation of degradation of coatings - Designation of quantityand size of defects, and of intensity of uniform changes in appearance - Part 8:Assessment of degree of delamination and corrosion around a scribe (ISO 4628-8:2005)


I.S. EN ISO 3126:200518.

Plastics piping systems - Plastics components - Determination of dimensions (ISO3126:2005)


I.S. EN ISO 10081-1:200519.

Classification of dense shaped refractory products - Part 1: Alumina-silica (ISO 10081-1:2003)


I.S. EN ISO 10081-2:200520.

Classification of dense shaped refractory products - Part 2: Basic products containingless than 7 % residual carbon (ISO 10081-2:2003)


I.S. EN ISO 10081-3:200521.

Classification of dense shaped refractory products - Part 3: Basic products containingfrom 7% to 50% residual carbon (ISO 10081-3:2003)


I.S. EN ISO 6134:200522.

Rubber hoses and hose assemblies for saturated steam - Specification (ISO 6134:2005)


I.S. EN ISO 2063:200523.

Thermal spraying - Metallic and other inorganic coatings - Zinc, aluminium and theiralloys (ISO 2063:2005)


I.S. EN 1992-2:200524.

Eurocode 2 - Design of concrete structures - Concrete bridges - Design and detailingrules


I.S. EN 1994-2:200525.

Eurocode 4 - Design of composite steel and concrete structures - Part 2: General rulesand rules for bridges


Date: 18/07/2018

I.S. EN ISO 15547-1:200526.

Petroleum, petrochemical and natural gas industries - Plate-type heat exchangers - Part1: Plate-and-frame heat exchangers (ISO 15547-1:2005)


I.S. EN ISO 15547-2:200527.

Petroleum, petrochemical and natural gas industries - Plate-type heat exchangers - Part2: Brazed aluminium plate-fin heat exchangers (ISO 15547-2:2005)


I.S. EN 71-11:200528.

Safety of toys - Part 11: Organic chemical compounds - Methods of analysis


I.S. EN ISO 22803:200529.

Dentistry - Membrane materials for guided tissue regeneration in oral and maxillofacialsurgery - Contents of a technical file (ISO 22803:2004)


I.S. EN 14487-1:200530.

Sprayed concrete - Part 1: Definitions, specifications and conformity


I.S. EN 13438:200531.

Paints and varnishes - Powder organic coatings for galvanized or sherardised steelproducts for construction purposes


I.S. EN 302-3:2004/A1:200532.

Adhesives for load-bearing timber structures - Test methods - Part 3: Determination ofthe effect of acid damage to wood fibres by temperature and humidity cycling on thetransverse tensilestrength


I.S. EN 14916:200533.

Domestic cookware - Graphical symbols (pictograms)


I.S. EN ISO 389-7:200534.

Acoustics - Reference zero for the calibration of audiometric equipment - Part 7:Reference threshold of hearing under freefield and diffuse-field listening conditions (ISO389-7:2005)


I.S. EN 14035-25:200535.

Fireworks - Part 25: Party Poppers - Specification and test methods


I.S. EN 14035-31:200536.

Fireworks - Part 31: Shell-in-mortars - Specification and test methods


I.S. EN 14035-21:200537.

Fireworks - Part 21: Jumping ground spinners - Specification and test methods


I.S. EN 14035-33:200538.

Fireworks - Part 33: Spinners - Specification and test methods


Date: 18/07/2018

I.S. EN 14952:200539.

Surfaces for sports areas - Determination of water absorption of unbound minerals


I.S. EN 14953:200540.

Surfaces for sport areas - Determination of thickness of unbound mineral surfaces foroutdoor sports areas


I.S. EN 14954:200541.

Surfaces for sports areas - Determination of hardness of natural turf and unboundmineral surfaces for outdoor sports areas


I.S. EN 14955:200542.

Surfaces for sports areas - Determination of composition and particle shape of unboundmineral surfaces for outdoor sports areas


I.S. EN 14956:200543.

Surfaces for sports areas - Determination of water content of unbound mineral surfacesfor outdoor sports areas


I.S. EN 13950:200544.

Gypsum plasterboard thermal/acoustic insulation composite panels - Definitions,requirements and test methods


I.S. EN 14908-1:200545.

Open Data Communication in Building Automation, Controls and Building Management -Building Network Protocol - Part 1: Protocol Stack


I.S. EN 1996-1-1:200546.

Eurocode 6 - Design of masonry structures - Part 1-1: General rules for reinforced andunreinforced masonry structures


I.S. EN ISO 9100-2:200547.

Glass containers - Vacuum lug finishes - Part 2: 33 medium (ISO 9100-2:2005)


I.S. EN ISO 9100-3:200548.

Glass containers - Vacuum lug finishes - Part 3: 38 regular (ISO 9100-3:2005)


I.S. EN ISO 9100-4:200549.

Glass containers - Vacuum lug finishes - Part 4: 38 medium (ISO 9100-4:2005)


I.S. EN 14887:200550.

Glass packaging - Cork removal devices - General requirements


I.S. EN 13025-1:200551.

Packaging - Light gauge metal containers - Part 1: Nominal filling volumes for round,cylindrical and tapered general use metal containers up to 40 000 ml


Date: 18/07/2018

I.S. EN 13025-2:200552.

Packaging - Light gauge metal containers - Part 2: Nonremovable head (tight head)round steel and tinplate containers with a nominal capacity of 20 000 ml, 25 000 ml and30 000 ml


I.S. EN 13025-3:200553.

Packaging - Light gauge metal containers - Part 3: Removable head (open head) roundsteel and tinplate containers with a nominal capacity of 20 000 ml, 25 000 ml and 30 000ml


I.S. EN ISO 21570:200554.

Foodstuffs - Methods of analysis for the detection of genetically modified organisms andderived products - Quantitative nucleic acid based methods (ISO 21570:2005)


I.S. EN ISO 14816:200555.

Road transport and traffic telematics - Automatic vehicle and equipment identification -Numbering and data structure (ISO 14816:2005)


I.S. EN ISO 4684:200556.

Leather - Chemical tests - Determination of volatile matter (ISO 4684:2005)


I.S. EN ISO 24450:200557.

Laboratory glassware - Wide-necked boiling flasks (ISO 24450:2005)


I.S. EN ISO 18453:200558.

Natural gas - Correlation between water content and water dew point (ISO 18453:2004)


I.S. EN ISO 11192:200559.

Small craft - Graphical symbols (ISO 11192:2005)


I.S. EN 12863:2002/A1:200560.

Transportable gas cylinders - Periodic inspection and maintenance of dissolvedacetylene cylinders


I.S. EN ISO 6360-3:200561.

Dentistry - Number coding system for rotary instruments - Part 3: Specific characteristicsof burs and cutters (ISO 6360-3:2005)


I.S. EN 165:200562.

Personal eye-protection - Vocabulary


I.S. EN ISO 20685:200563.

3-D scanning methodologies for internationally compatible anthropometric databases(ISO 20685:2005)


I.S. EN 1218-4:2004/A1:200564.

Safety of woodworking machines - Tenoning machines - Part 4: Edge banding machinesfed by chain(s)


Date: 18/07/2018

I.S. EN 14683:200565.

Surgical masks - Requirements and test methods


I.S. CEN TR 15172-1:200566.

Whole-body vibration - Guidelines for vibration hazards reduction - Part 1: Engineeringmethods by design of machinery


I.S. CEN TR 15172-2:200567.

Whole-body vibration - Guidelines for vibration hazards reduction - Part 2: Managementmeasures at the workplace


I.S. EN 14976:200568.

Textiles - Mattress ticking - Specifications and test methods


I.S. EN ISO 291:200569.

Plastics - Standard atmospheres for conditioning and testing (ISO 291:2005)


I.S. EN ISO 483:200570.

Plastics - Small enclosures for conditioning and testing using aqueous solutions tomaintain the humidity at a constant value (ISO 483:2005)


I.S. EN 14789:200571.

Stationary source emissions - Determination of volume concentration of oxygen (O2) -Reference method - Paramagnetism


I.S. EN 14790:200572.

Stationary source emissions - Determination of the water vapour in ducts


I.S. EN 14791:200573.

Stationary source emissions - Determination of mass concentration of sulphur dioxide -Reference method


I.S. CEN TR 13200-2:200574.

Spectator facilities - Layout criteria of service area - Part 2: Characteristics and nationalsituations


I.S. EN 14892:200575.

Transport service - City logistics - Guideline for the definition of limited access to citycenters


I.S. CEN TS 14778-1:200576.

Solid biofuels - Sampling - Part 1: Methods for sampling


I.S. EN 10049:200577.

Measurement of roughness average Ra and peak count RPc on metallic flat products


I.S. EN 10300:200578.

Steel tubes and fittings for onshore and offshore pipelines - Bituminous hot appliedmaterials for external coating


Date: 18/07/2018

I.S. CWA 15453:200579.

Harmonisation of vocabularies for eLearning


I.S. CWA 15454:200580.

A Simple Query Interface Specification for Learning Repositories


I.S. CWA 15455:200581.

A European Model for Learner Competencies


S.R. ISO/TS 16949:200682.

Quality management systems — Particular requirements for the application of ISO9001:2000 for automotive production and relevant service part organizations


I.S. EN 50144-1:1998/AC:200583.

Safety of hand-held electric motor operated tools -- Part 1: General requirements


I.S. EN 55016-1-4:2004/A2:200584.

Specification for radio disturbance and immunity measuring apparatus and methods --Part 1-4: Radio disturbance and immunity measuring apparatus - Ancillary equipment -Radiated disturbances (CISPR 16-1-4:2003/A2:2005 (EQV))


I.S. EN 60068-2-30:200585.

Environmental testing -- Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 hcycle) (IEC 60068-2-30:2005 (EQV))


I.S. EN 60255-27:200586.

Measuring relays and protection equipment -- Part 27: Product safety requirements (IEC60255-27:2005 (EQV))


I.S. EN 60317-0-4:1998/A2:200587.

Specifications for particular types of winding wires -- Part 0-4: General requirements -Glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copperwire (IEC 60317-0-4:1997/A2:2005 (EQV))


I.S. EN 60335-2-31:200588.

Household and similar electrical appliances - Safety -- Part 2-31: Particular requirementsfor range hoods (IEC 60335-2-31:2002 (EQV))


I.S. EN 60384-16:200589.

Fixed capacitors for use in electronic equipment -- Part 16: Sectional specification: Fixedmetallized polypropylene film dielectric d.c. capacitors (IEC 60384-16:2005 (EQV))


I.S. EN 60384-16-1:200590.

Fixed capacitors for use in electronic equipment -- Part 16-1: Blank detail specification:Fixed metallized polypropylene film dielectric d.c. capacitors - Assessment levels E andEZ (IEC 60384-16-1:2005 (EQV))


Date: 18/07/2018

I.S. EN 60384-17:200591.

Fixed capacitors for use in electronic equipment -- Part 17: Sectional specification: Fixedmetallized polypropylene film dielectric a.c. and pulse capacitors (IEC 60384-17:2005(EQV))


I.S. EN 60384-17-1:200592.

Fixed capacitors for use in electronic equipment -- Part 17-1: Blank detail specification -Fixed metallized polypropylene film dielectric a.c. and pulse capacitors - Assessmentlevels E and EZ (IEC 60384-17-1:2005 (EQV))


I.S. EN 60384-2:200593.

Fixed capacitors for use in electronic equipment -- Part 2: Sectional specification: Fixedmetallized polyethylene-terephthalate film dielectric d.c. capacitors (IEC 60384-2:2005(EQV))


I.S. EN 60384-2-1:200594.

Fixed capacitors for use in electronic equipment -- Part 2-1: Blank detail specification:Fixed metallized polyethylene-terephthalate film dielectric d.c. capacitors - Assessmentlevels E and EZ (IEC 60384-2-1:2005 (EQV))


I.S. EN 60534-8-4:200595.

Industrial-process control valves -- Part 8-4: Noise considerations - Prediction of noisegenerated by hydrodynamic flow (IEC 60534-8-4:2005 (EQV))


I.S. EN 60684-2:1997/A2:200596.

Flexible insulating sleeving -- Part 2: Methods of test (IEC 60684-2:1997/A2:2005(EQV))


I.S. EN 60684-3-214:200597.

Flexible insulating sleeving -- Part 3: Specifications for individual types of sleeving --Sheet 214: Heat-shrinkable, polyolefin sleeving, not flame retarded, shrink ratio 3:1 -Thick and medium wall (IEC 60684-3-214:2005 (EQV))


I.S. EN 61175:200598.

Industrial systems, installations and equipment and industrial products - Designation ofsignals (IEC 61175:2005 (EQV))


I.S. EN 62055-31:200599.

Electricity metering - Payment systems -- Part 31: Particular requirements - Staticpayment meters for active energy (classes 1 and 2) (IEC 62055-31:2005 (EQV))


I.S. EN ISO 13628-1:2006100.

Petroleum and natural gas industries - Design and operation of subsea productionsystems - Part 1: General requirements and recommendations (ISO 13628-1:2005)


I.S. EN ISO 10042:2006101.

Welding - Arc-welded joints in aluminium and its alloys - Quality levels for imperfections(ISO 10042:2005)


Date: 18/07/2018

I.S. EN 12984:2006102.

Food processing machinery - Portable and/or hand-guided machines and applianceswith mechanically driven cutting tools - Safety and hygiene requirements


I.S. EN 14052:2006103.

High performance industrial helmets


I.S. EN ISO 9342-2:2006104.

Optics and optical instruments - Test lenses for calibration of focimeters - Part 2: Testlenses for focimeters used for measuring contact lenses (ISO 9342-2:2005)


I.S. CEN TS 15176:2006105.

Evaluation of conformity for fixed firefighting systems standards


I.S. EN 1034-13:2006106.

Safety of machinery - Safety requirements for the design and construction of papermaking and finishing machines - Part 13: Machines for de-wiring bales and units


I.S. EN 1034-14:2006107.

Safety of machinery - Safety requirements for the design and construction of papermaking and finishing machines - Part 14: Reel splitter


I.S. CEN TS 15186:2006108.

Furniture - Assessment of the surface resistance to scratching


I.S. CEN TS 15185:2006109.

Furniture - Assessment of the surface resistance to abrasion


I.S. CEN TR 581-4:2006110.

Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 4:Requirements and test methods for durability under the influence of climatic conditions


I.S. EN 13923:2006111.

Filament-wound FRP pressure vessels - Materials, design, manufacturing and testing


I.S. EN 14209:2006112.

Preformed plasterboard cornices - Definitions, requirements and test methods


I.S. EN 14496:2006113.

Gypsum based adhesives for thermal/acoustic insulation composite panels andplasterboards - Definitions, requirements and test methods


I.S. CEN TR 14819-2:2006114.

Safety recommendations for cableway installations designed to carry persons -Prevention and fight against fire - Part 2: Other funicular railways and other installations


I.S. EN ISO 13000-1:2006115.

Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1: Requirementsand designation (ISO 13000-1:2005)


Date: 18/07/2018

I.S. EN ISO 13000-2:2006116.

Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation oftest specimens and determination of properties (ISO 13000-2:2005)


I.S. EN 14792:2006117.

Stationary source emissions - Determination of mass concentration of nitrogen oxides(NOx) - Reference method: Chemiluminescence


I.S. CEN TR 15018:2006118.

Characterization of waste - Digestion of waste samples using alkali-fusion techniques


I.S. EN 2002-001:2006119.

Aerospace series - Metallic materials - Test methods - Part 1: Tensile testing at ambienttemperature


I.S. EN 2002-002:2006120.

Aerospace series - Metallic materials - Test methods - Part 2: Tensile testing at elevatedtemperature


I.S. EN 2084:2006121.

Aerospace series - Cables, electric, single-core, general purpose, with conductors incopper or copper alloy - Technical specification


I.S. EN 2243-1:2006122.

Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 1:Single lap shear


I.S. EN 3545-001:2006123.

Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear,plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 001:Technical specification


I.S. EN 3545-002:2006124.

Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear,plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 002:Specification of performance and contact arrangements


I.S. EN 3545-003:2006125.

Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear,plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 003:Connectors with female contacts - Product standard


I.S. EN 3545-004:2006126.

Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear,plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 004:Connectors with male contacts - Product standard


Date: 18/07/2018

I.S. EN 3545-007:2006127.

Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear,plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 007:Cable clamp - Product standard


I.S. EN 4165-012:2006128.

Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature175 °C continuous - Part 012: Flange mounting receptacle 2 and 4 modules, series 3 -Product standard


I.S. EN 4165-013:2006129.

Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature175 °C continuous - Part 013: Cable clamp 2 and 4 modules for connectors, series 2and series 3 - Product standard


I.S. EN 4165-014:2006130.

Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature175 °C continuous - Part 014: Shielded accessory body, 2 and 4 modules forconnectors, series 2 and series 3 - Product standard


I.S. EN 4165-015:2006131.

Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature175 °C continuous - Part 015: Round chimney for accessory (1 per module cavity) -Product standard


I.S. EN 4165-016:2006132.

Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature175 °C continuous - Part 016: Double oval chimney for accessory (1 per 2 modules) -Productstandard


I.S. EN 4165-017:2006133.

Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature175 °C continuous - Part 017: Blank chimney for accessory (1 per module cavity) -Product standard


I.S. EN 4165-022:2006134.

Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature175 °C continuous - Part 022: Insertion/extraction tool for removal of modules - Productstandard


I.S. EN 4434:2006135.

Aerospace series - Copper or copper alloy lightweight conductors for electrical cables -Product standard (Normal and tight tolerances)


I.S. EN 4610:2006136.

Aerospace series - Pipe coupling 8° 30' in titanium alloy - Elbows 45°, with thrust wirenut


Date: 18/07/2018

I.S. EN 2267-002:2006137.

Aerospace series - Cables, electrical, for general purpose - Operating temperaturesbetween - 55 °C and 260 °C - Part 002: General


I.S. EN 2267-009:2006138.

Aerospace series - Cables, electrical, for general purpose - Operating temperaturesbetween - 55 °C and 260 °C - Part 009: DRA family, single and multicore assembly -Product standard


I.S. EN 2267-010:2006139.

Aerospace series - Cables, electrical, for general purpose - Operating temperaturesbetween - 55 °C and 260 °C - Part 010: DR family, single UV laser printable – Productstandard


I.S. EN 3475-408:2006140.

Aerospace series - Cables, electrical, aircraft use - Test methods - Part 408: Fireresistance


I.S. EN 3475-411:2006141.

Aerospace series - Cables, electrical, aircraft use - Test methods - Part 411: Resistanceto fluids


I.S. EN 3475-416:2006142.

Aerospace series - Cables, electrical, aircraft use - Test methods - Part 416: Thermalstability


I.S. EN 3745-202:2006143.

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 202:Fibre dimensions


I.S. EN 3745-306:2006144.

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 306:Variation of attenuation during temperature cycling


I.S. EN 3745-401:2006145.

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 401:Accelerated ageing


I.S. EN 3745-402:2006146.

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 402:Temperature cycling


I.S. EN 3745-404:2006147.

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 404:Thermal shock


I.S. EN 3745-406:2006148.

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 406:Cold bend test


Date: 18/07/2018

I.S. EN 3745-412:2006149.

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 412:Humidity resistance


I.S. EN 3745-503:2006150.

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 503:Scrape abrasion


I.S. EN 3745-703:2006151.

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 503:Scrape abrasion


I.S. EN 4049-002:2006152.

Aerospace series - Thermocouple extension cable - Operating temperatures between -65 °C to 260 °C - Part 002: General


I.S. EN 4057-201:2006153.

Aerospace series - Cable ties for harnesses - Test methods - Part 201: Visualexamination


I.S. EN 4057-202:2006154.

Aerospace series - Cable ties for harnesses - Test methods - Part 202: Examination ofmass and dimensions


I.S. EN 4057-301:2006155.

Aerospace series - Cable ties for harnesses - Test methods - Part 301: Salt mist test


I.S. EN 4057-303:2006156.

Aerospace series - Cable ties for harnesses - Test methods - Part 303: Resistance tofluids


I.S. EN 4057-305:2006157.

Aerospace series - Cable ties for harnesses - Test methods - Part 305: Colour fastness


I.S. EN 4057-405:2006158.

Aerospace series - Cable ties for harnesses - Test methods - Part 405: Compass safedistance


I.S. EN 4057-407:2006159.

Aerospace series - Cable ties for harnesses - Test methods - Part 407: Verification ofapplication tool settings


I.S. EN 2267-003:2006160.

Aerospace series - Cables, electrical, for general purpose - Operating temperaturesbetween - 55 °C and 260 °C - Part 003: Ink jet printable - Product standard


Date: 18/07/2018

I.S. EN 2267-007:2006161.

Aerospace series - Cables, electrical, for general purpose - Operating temperaturesbetween - 55 °C and 260 °C - Part 007: DMA family, single ink-jet printable andmulticore assembly - Product standard


I.S. EN 2267-008:2006162.

Aerospace series - Cables, electrical, for general purpose - Operating temperaturesbetween - 55 °C and 260 °C - Part 008: DM family, single UV laser printable andmulticore assembly - Product standard


I.S. EN 3745-407:2006163.

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 407:Flammability


I.S. EN 2266-002:2006164.

Aerospace series - Cables, electrical, for general purpose - Operating temperaturesbetween - 55 °C and 200 °C - Part 002: General


I.S. EN 2266-005:2006165.

Aerospace series - Cables, electrical, for general purpose - Operating temperaturesbetween - 55 °C and 200 °C - Part 005: UV laser printable - Product standard


I.S. EN 2266-007:2006166.

Aerospace series - Cables, electrical, for general purpose - Operating temperaturesbetween - 55 °C and 200 °C - Part 007: UV laser printable multicore jacketed cable -Product standard


I.S. EN 4458:2006167.

Aerospace series - Studs, MJ threads, in titanium alloy TIP64001, MoS2 coated, withserrated locking ring in corrosion resisting steel - Strength class: 1 100 MPa (at ambienttemperature) - Technical specification


I.S. EN 4175:2006168.

Aerospace series - Collars, flanged swage locking, sheartype, in titanium TI-P99002,metric series


I.S. CEN TS 15224:2006169.

Health services - Quality management systems - Guide for the use of EN ISO9001:2000


I.S. EN ISO 19739:2006170.

Natural gas - Determination of sulfur compounds using gas chromatography (ISO19739:2004)


I.S. CEN TR 14547:2006171.

Sampling schemes for third party conformity assessment of fineness in precious metalarticles


Date: 18/07/2018

I.S. EN ISO 1101:2006172.

Geometrical Product Specifications (GPS) - Geometrical tolerancing - Tolerances ofform, orientation, location and runout (ISO 1101:2004)


I.S. EN 3745-512:2006173.

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 512:Flexure endurance


I.S. EN 3745-513:2006174.

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 513:Crush resistance


I.S. EN 81-1:1998/A1:2006175.

Safety rules for the construction and installation of lifts - Part 1: Electric lifts


I.S. EN 81-2:1998/A1:2006176.

Safety rules for the construction and installation of lifts - Part 2: Hydraulic lifts


I.S. EN ISO 19901-1:2006177.

Petroleum and natural gas industries - Specific requirements for offshore structures -Part 1: Metocean design and operating considerations (ISO 19901-1:2005)


I.S. EN 14874:2006178.

Inland navigation vessels - Studless anchor chain - Cable lifter


I.S. EN 14394:2006179.

Heating boilers - Heating boilers with forced draught burners - Nominal heat output notexceeding 10 MW and maximum operating temperature of 110 C


I.S. EN 54-10:2002/A1:2005180.

Fire detection and fire alarm systems - Part 10: Flame detectors - Point detectors


I.S. EN 54-11:2001/A1:2006181.

Fire detection and fire alarm systems - Part 11: Manual call points


I.S. EN 14707:2006182.

Thermal insulating products for building equipment and industrial installations -Determination of maximum service temperature for preformed pipe insulation


I.S. CEN ISO TS 15883-5:2006183.

Washer-disinfectors - Part 5: Test soils and methods for demonstrating cleaning efficacy(ISO/TS 15883-5:2005)


I.S. EN 253:2003/A1:2006184.

District Heating Pipes - Preinsulated bonded pipe systems for directly buried hot waternetworks - Pipe assembly of steel service pipe, polyurethane thermal insulation andouter casing of polyethylene


Date: 18/07/2018

I.S. EN ISO 7730:2006185.

Ergonomics of the thermal environment - Analytical determination and interpretation ofthermal comfort using calculation of the PMV and PPD indices and local thermalcomfort criteria (ISO 7730:2005)


I.S. EN 14081-1:2006186.

Timber structures - Strength graded structural timber with rectangular cross section -Part 1: General requirements


I.S. EN 14081-2:2006187.

Timber structures - Strength graded structural timber with rectangular cross section -Part 2: Machine grading; additional requirements for initial type testing


I.S. EN 14081-3:2006188.

Timber structures - Strength graded structural timber with rectangular cross section -Part 3: Machine grading; additional requirements for factory production control


I.S. EN 14081-4:2005189.

Timber structures - Strength graded structural timber with rectangular cross section -Part 4: Machine Grading -Grading machine settings for machine controlled systems


I.S. EN 13782:2006190.

Temporary structures - Tents - Safety


I.S. EN 13566-2:2006191.

Plastics piping systems for renovation of underground nonpressure drainage andsewerage networks - Part 2: Lining with continuous pipes


I.S. EN 12259-2:1999/A2:2006192.

Fixed firefighting systems - Components for sprinkler and water spray systems - Part 2:Wet alarm valve assemblies


I.S. EN 12259-3:2000/A2:2006193.

Fixed firefighting systems - Components for sprinkler and water spray systems - Part 3:Dry alarm valve assemblies


I.S. EN 1034-4:2006194.

Safety of machinery - Safety requirements for the design and construction of papermaking and finishing machines - Part 4: Pulpers and their loading facilities


I.S. EN 12697-40:2006195.

Bituminous mixtures - Test methods for hot mix asphalt - Part 40: In situ drainability


I.S. EN 12697-1:2006196.

Bituminous mixtures - Test methods for hot mix asphalt - Part 1: Soluble binder content


I.S. EN 12697-42:2006197.

Bituminous mixtures - Test methods for hot mix asphalt - Part 42: Amount of coarseforeign matter in reclaimed asphalt


Date: 18/07/2018

I.S. EN 1998-2:2006198.

Eurocode 8 - Design of structures for earthquake resistance - Part 2: Bridges


I.S. EN 14067-4:2006199.

Railway applications - Aerodynamics - Part 4: Requirements and test procedures foraerodynamics on open track


I.S. EN 14847:2006200.

Aerosol containers - Tinplate containers - Dimensions of the 25,4 mm aperture


I.S. EN 14848:2006201.

Aerosol containers - Metal containers with 25,4 mm aperture - Dimensions of valve cups


I.S. EN 14849:2006202.

Aerosol containers - Glass containers - Dimensions of aerosol valve ferrules


I.S. EN 14850:2006203.

Aerosol containers - Metal containers with 25,4 mm aperture - Measurement of contactheight


I.S. EN 14851:2006204.

Aerosol containers - Aerosol foam flammability test


I.S. EN 14852:2006205.

Aerosol containers - Determination of the ignition distance of the spray jet


I.S. EN 14853:2006206.

Aerosol containers - Enclosed space ignition test


I.S. EN 14854:2006207.

Aerosol containers - Glass containers - Dimensions of the neck finish


I.S. EN 862:2006208.

Packaging - Child-resistant packaging - Requirements and testing procedures for non-reclosable packages for nonpharmaceutical products


I.S. EN 14795:2006209.

LPG equipment and accessories - Transportable refillable aluminium cylinders forLiquefied Petroleum Gas (LPG) - Periodic inspection


I.S. EN 1440:2006210.

LPG equipment and accessories - Transportable refillable welded and brazed steelLiquefied Petroleum Gas (LPG) cylinders - Periodic inspection


I.S. EN 13200-3:2006211.

Spectator facilities - Part 3: Separating elements - Requirements


I.S. EN 14765:2006212.

Bicycles for young children - Safety requirements and test methods


Date: 18/07/2018

I.S. EN 14766:2006213.

Mountain-bicycles - Safety requirements and test methods


I.S. EN 14781:2006214.

Racing bicycles - Safety requirements and test methods


I.S. EN ISO 4545-1:2006215.

Metallic materials - Knoop hardness test - Part 1: Test method (ISO 4545-1:2005)


I.S. EN ISO 4545-2:2006216.

Metallic materials - Knoop hardness test - Part 2: Verification and calibration of testingmachines (ISO 4545-2:2005)


I.S. EN ISO 4545-3:2006217.

Metallic materials - Knoop hardness test - Part 3: Calibration of reference blocks (ISO4545-3:2005)


I.S. EN ISO 4545-4:2006218.

Metallic materials - Knoop hardness test - Part 4: Table of hardness values (ISO 4545-4:2005)


I.S. EN 50240:2006219.

Electromagnetic compatibility (EMC) - Product standard for resistance weldingequipment


I.S. EN 50381:2004/AC:2005220.

Transportable ventilated rooms with or without an internal source of release


I.S. EN 60118-7:2006221.

Electroacoustics - Hearing aids -- Part 7: Measurement of the performancecharacteristics of hearing aids for production, supply and delivery quality assurancepurposes (IEC 60118-7:2005 (EQV))


I.S. EN 60118-8:2006222.

Electroacoustics - Hearing aids -- Part 8: Methods of measurement of performancecharacteristics of hearing aids under simulated in situ working conditions (IEC 60118-8:2005 (EQV))


I.S. EN 60317-30:1996/A2:2006223.

Specifications for particular types of winding wires -- Part 30: Polyimide enamelledrectangular copper wire, class 220 (IEC 60317-30:1990/A2:2005 (EQV))


I.S. EN 60317-31:1998/A2:2006224.

Specifications for particular types of winding wires -- Part 31: Glass-fibre wound resin orvarnish impregnated, bare or enamelled rectangular copper wire, temperature index 180(IEC 60317-31:1990/A2:2005 (EQV))


Date: 18/07/2018

I.S. EN 60317-32:1998/A2:2005225.

Specifications for particular types of winding wires -- Part 32: Glass-fibre wound, resin orvarnish impregnated, bare or enamelled rectangular copper wire, temperature index 155(IEC 60317-32:1990/A2:2005 (EQV))


I.S. EN 60317-33:1996/A2:2006226.

Specifications for particular types of winding wires -- Part 33: Glass-fibre wound, resin orvarnish impregnated, bare or enamelled rectangular copper wire, temperature index 200(IEC 60317-33:1990/A2:2005 (EQV))


I.S. EN 60317-39:1994/A2:2006227.

Specifications for particular types of winding wires -- Part 39: Glass-fibre braided, resinor varnish impregnated, bare or enamelled rectangular copper wire, temperature index180 (IEC 60317-39:1992/A2:2005 (EQV))


I.S. EN 60317-40:1994/A2:2006228.

Specifications for particular types of winding wires -- Part 40: Glass-fibre braided, resinor varnish impregnated, bare or enamelled rectangular copper wire, temperature index200 (IEC 60317-40:1992/A2:2005 (EQV))


I.S. EN 60601-2-37:2001/A2:2006229.

Medical electrical equipment -- Part 2-37: Particular requirements for the safety ofultrasonic medical diagnostic and monitoring equipment (IEC 60601-2-37:2001/A2:2005(EQV))


I.S. EN 60661:2001/A2:2006230.

Methods for measuring the performance of electric household coffee makers (IEC60661:1999/A2:2005 (EQV))


I.S. EN 60794-2-11:2006231.

Optical fibre cables -- Part 2-11: Indoor cables - Detailed specification for simplex andduplex cables for use in premises cabling (IEC 60794-2-11:2005 (EQV))


I.S. EN 60335-2-35:2006232.

Household and similar electrical appliances - Safety -- Part 2-35: Particular requirementsfor instantaneous water heaters (IEC 60335-2-35:2002 (EQV))


I.S. EN 61290-1-2:2006233.

Optical amplifiers - Test methods -- Part 1-2: Power and gain parameters - Electricalspectrum analyzer method (IEC 61290-1-2:2005 (EQV))


I.S. EN 61290-1-3:2006234.

Optical amplifiers - Test methods -- Part 1-3: Power and gain parameters - Opticalpower meter method (IEC 61290-1-3:2005 (EQV))


I.S. EN 61300-2-12:2006235.

Fibre optic interconnecting devices and passive components - Basic test andmeasurement procedures -- Part 2-12: Tests - Impact (IEC 61300-2-12:2005 (EQV))


Date: 18/07/2018

I.S. EN 61300-3-1:2006236.

Fibre optic interconnecting devices and passive components - Basic test andmeasurement procedures -- Part 3-1: Examinations and measurements - Visualexamination (IEC 61300-3-1:2005 (EQV))


I.S. EN 61332:2006237.

Soft ferrite material classification (IEC 61332:2005 (EQV))


I.S. EN 61744:2006238.

Calibration of fibre optic chromatic dispersion test sets (IEC 61744:2005 (EQV))


I.S. EN 61754-10:2006239.

Fibre optic connector interfaces -- Part 10: Type Mini-MPO connector family (IEC 61754-10:2005 (EQV))


I.S. EN 61754-5:2006240.

Fibre optic connector interfaces -- Part 5: Type MT connector family (IEC 61754-5:2005(EQV))


I.S. EN 61935-1:2006241.

Testing of balanced communication cabling in accordance with standards series EN50173 -- Part 1: Installed cabling (IEC 61935-1:2005 (MOD))


I.S. EN 61935-2:2006242.

Testing of balanced communication cabling in accordance with standards series EN50173 -- Part 2: Patch cords and work area cords (IEC 61935-2:2005 (EQV))


I.S. EN 62317-4:2006243.

Ferrite cores - Dimensions -- Part 4: RM-cores and associated parts (IEC 62317-4:2005(EQV))


I.S. HD 384.4.43 S2:2001/AC:2005244.

Electrical installations of buildings -- Part 4: Protection for safety -- Chapter 43:Protection against overcurrent (IEC 60364-4-43:1977 (MOD) + A1:1997 (MOD))


I.S. EN 60664-4:2006245.

Insulation coordination for equipment within low-voltage systems -- Part 4: Considerationof high-frequency voltage stress (IEC 60664-4:2005 (EQV))


I.S. EN 61267:2006246.

Medical diagnostic X-ray equipment - Radiation conditions for use in the determinationof characteristics (IEC 61267:2005 (EQV))


I.S. EN 61951-1:2003/A1:2006247.

Secondary cells and batteries containing alkaline or other non-acid electrolytes -Portable sealed rechargeable single cells -- Part 1: Nickel-cadmium (IEC 61951-1:2003/A1:2005 (EQV))


Date: 18/07/2018

I.S. EN 62132-5:2006248.

Integrated circuits - Measurement of electromagnetic immunity, 150 kHz to 1 GHz -- Part5: Workbench Faraday cage method (IEC 62132-5:2005 (EQV))


I.S. CWA 50487:2006249.

SmartHouse Code of Practice


I.S. EN 60794-2-21:2006250.

Optical fibre cables -- Part 2-21: Indoor cables - Detailed specification for multi-fibreoptical distribution cables for use in premises cabling (IEC 60794-2-21:2005 (EQV))


I.S. EN 60794-2-31:2006251.

Optical fibre cables -- Part 2-31: Indoor cables - Detailed specification for optical fibreribbon cables for use in premises cabling (IEC 60794-2-31:2005 (EQV))


I.S. EN 60320-2-4:2006252.

Appliance couplers for household and similar general purposes -- Part 2-4: Couplersdependent on appliance weight for engagement (IEC 60320-2-4:2005 (EQV))


I.S. EN 61770:1999/A1:2004253.

Electric appliances connected to the water mains - Avoidance of backsiphonage andfailure of hose-sets (IEC 61770:1998/A1:2004 (EQV))


I.S. EN 50122-2:1998/A1:2002254.

Railway applications - Fixed installations -- Part 2: Protective provisions against theeffects of stray currents caused by d.c. traction systems


I.S. EN 50144-2-3:2002/A1:2002255.

Safety of hand-held electric motor operated tools -- Part 2-3: Particular requirements forgrinders, disk type sanders and polishers


I.S. EN 50307:2002256.

Lead and lead alloys - Lead and lead alloy sheaths and sleeves of electric cables


I.S. EN 50324-1:2002257.

Piezoelectric properties of ceramic materials and components -- Part 1: Terms anddefinitions


I.S. EN 50325-1:2002258.

Industrial communications subsystem based on ISO 11898 (CAN) for controller-deviceinterfaces -- Part 1: General requirements


I.S. EN 50325-4:2002259.

Industrial communications subsystem based on ISO 11898 (CAN) for controller-deviceinterfaces -- Part 4: CANopen


I.S. EN 60122-1:2002260.

Quartz crystal units of assessed quality -- Part 1: Generic specification (IEC 60122-1:2002 (EQV))


Date: 18/07/2018

I.S. EN 60230:2002261.

Impulse tests on cables and their accessories (IEC 60230:1966 (EQV))


I.S. EN 60335-2-101:2002262.

Household and similar electrical appliances - Safety -- Part 2-101: Particularrequirements for vaporizers (IEC 60335-2-101:2002 (EQV))


I.S. EN 60335-2-17:2002263.

Household and similar electrical appliances - Safety -- Part 2-17: Particular requirementsfor blankets, pads and similar flexible heating appliances (IEC 60335-2-17:2002 (EQV))


I.S. EN 60335-2-44:2002264.

Household and similar electrical appliances - Safety -- Part 2-44: Particular requirementsfor ironers (IEC 60335-2-44:2002 (EQV))


I.S. EN 60335-2-69:1998/A11:2002265.

Safety of household and similar electrical appliances -- Part 2-69: Particularrequirements for wet and dry vacuum cleaners, including power brush, for industrial andcommercial use


I.S. EN 60335-2-70:2002266.

Household and similar electrical appliances - Safety -- Part 2-70: Particular requirementsfor milking machines (IEC 60335-2-70:2002 (EQV))


I.S. EN 60335-2-87:2002267.

Household and similar electrical appliances - Safety -- Part 2-87: Particular requirementsfor electrical animal-stunning equipment (IEC 60335-2-87:2002 (EQV))


I.S. EN 60335-2-9:1995/A13:2002268.

Safety of household and similar electrical appliances -- Part 2-9: Particular requirementsfor grills, toasters and similar portable cooking appliances


I.S. EN 60335-2-90:2002269.

Household and similar electrical appliances - Safety -- Part 2-90: Particular requirementsfor commercial microwave ovens (IEC 60335-2-90:2002 (EQV))


I.S. EN 61280-2-9:2002270.

Fibre optic communication subsystem test procedures -- Part 2-9: Digital systems -Optical signal-to-noise ratio measurement for dense wavelength-division multiplexedsystems (IEC 61280-2-9:2002 (EQV))


I.S. EN 61291-5-2:2002271.

Optical amplifiers -- Part 5-2: Qualification specifications - Reliability qualification foroptical fibre amplifiers (IEC 61291-5-2:2002 (EQV))


I.S. EN 61514:2002272.

Industrial-process control systems - Methods of evaluating the performance of valvepositioners with pneumatic outputs (IEC 61514:2000 (MOD))


Date: 18/07/2018

I.S. EN 61982-2:2002273.

Secondary batteries for the propulsion of electric road vehicles -- Part 2: Dynamicdischarge performance test and dynamic endurance test (IEC 61982-2:2002 (EQV))


I.S. EN 62271-100:2001/A1:2002274.

High-voltage switchgear and controlgear -- Part 100: High-voltage alternating-currentcircuit-breakers (IEC 62271-100:2001/A1:2002 (EQV))


I.S. EN 170100:2001275.

Sectional Specification: Waveguide type dielectric resonators


I.S. EN 187200:2001276.

Sectional Specification: Optical cables to be used along electrical power lines (OCEPL)


I.S. EN 60061-1:1993/A25:2001277.

Lamp caps and holders together with gauges for the control of interchangeability andsafety -- Part 1: Lamp caps (IEC 60061-1:1969/A25:2001 (EQV))


I.S. EN 60061-1:1993/A26:2001278.

Lamp caps and holders together with gauges for the control of interchangeability andsafety -- Part 1: Lamp caps (IEC 60061-1:1969/A26:2001 (EQV))


I.S. EN 60061-2:1993/A22:2001279.

Lamp caps and holders together with gauges for the control of interchangeability andsafety -- Part 2: Lampholders (IEC 60061-2:1969/A22:2001 (EQV))


I.S. EN 60061-2:1993/A23:2001280.



I.S. EN 60061-3:1993/A24:2001281.

Lamp caps and holders together with gauges for the control of interchangeability andsafety -- Part 3: Gauges (IEC 60061-3:1969/A24:2001 (EQV))


I.S. EN 60061-3:1993/A25:2001282.



I.S. EN 60076-3:2001283.

Power transformers -- Part 3: Insulation levels, dielectric tests and external clearances inair (IEC 60076-3:2000 (EQV) + corrigendum Dec. 2000 (EQV))


I.S. EN 60352-5:2001284.

Solderless connections -- Part 5: Press-in connections - General requirements, testmethods and practical guidance (IEC 60352-5:2001 (EQV))


I.S. EN 60424-4:2001285.

Ferrite cores - Guide on the limits of surface irregularities -- Part 4: Ring cores (IEC60424-4:2001 (EQV))


Date: 18/07/2018

I.S. EN 60598-2-3:1994/A2:2001286.

Luminaires -- Part 2-3: Particular requirements - Luminaires for road and street lighting(IEC 60598-2-3:1993/A2:2000 (EQV))


I.S. EN 60601-2-37:2001287.

Medical electrical equipment -- Part 2-37: Particular requirements for the safety ofultrasonic medical diagnostic and monitoring equipment (IEC 60601-2-37:2001 (EQV))


I.S. EN 60870-5-104:2001288.

Telecontrol equipment and systems -- Part 5-104: Transmission protocols - Networkaccess for IEC 60870-5-101 using standard transport profiles (IEC 60870-5-104:2000(EQV))


I.S. EN 61252:1995/A1:2001289.

Electroacoustics - Specifications for personal sound exposure meters (IEC61252:1993/A1:2000 (EQV))


I.S. EN 61744:2001290.

Calibration of fibre optic chromatic dispersion test sets (IEC 61744:2001 (EQV))


I.S. EN 62071:2001291.

Helical-scan compressed digital video cassette recording system using 6,35 mmmagnetic tape - Format D-7 (IEC 62071:2000 (EQV))


I.S. EN 62079:2001292.

Preparation of instructions - Structuring, content and presentation (IEC 62079:2001(EQV))


I.S. EN 50310:2000293.

Application of equipotential bonding and earthing in buildings with informationtechnology equipment


I.S. EN 60068-2-57:2000294.

Environmental testing -- Part 2-57: Tests - Test Ff: Vibration - Time-history method (IEC60068-2-57:1999 (EQV))


I.S. EN 60311:1997/A2:2000295.

Electric irons for household or similar use - Methods for measuring performance (IEC60311:1995/A2:1999 (EQV))


I.S. EN 60317-35:1994/A2:2000296.

Specifications for particular types of winding wires -- Part 35: Solderable polyurethaneenamelled round copper wire, class 155, with a bonding layer (IEC 60317-35:1992/A2:1999 (EQV))


I.S. EN 60317-36:1994/A2:2000297.

Specifications for particular types of winding wires -- Part 36: Solderable polyesterimideenamelled round copper wire, class 180, with a bonding layer (IEC 60317-36:1992/A2:1999 (EQV))


Date: 18/07/2018

I.S. EN 60317-37:1994/A2:2000298.

Specifications for particular types of winding wires -- Part 37: Polyesterimide enamelledround copper wire, class 180, with a bonding layer (IEC 60317-37:1992/A2:1999 (EQV))


I.S. EN 60335-2-2:1995/A2:2000299.

Safety of household and similar electrical appliances -- Part 2-2: Particular requirementsfor vacuum cleaners and water suction cleaning appliances (IEC 60335-2-2:1993/A2:1999 (EQV))


I.S. EN 60335-2-62:1997/A2:2000300.

Safety of household and similar electrical appliances -- Part 2-62: Particularrequirements for commercial electric rinsing sinks (IEC 60335-2-62:1996/A2:2000(EQV))


I.S. EN 60335-2-98:1997/A1:2000301.

Safety of household and similar electrical appliances -- Part 2-98: Particularrequirements for humidifiers (IEC 60335-2-98:1997/A1:1999 (EQV))


I.S. EN 60349-1:2000302.

Electric traction - Rotating electrical machines for rail and road vehicles -- Part 1:Machines other than electronic convertor-fed alternating current motors (IEC 60349-1:1999 (EQV))


I.S. EN 60400:2000303.

Lampholders for tubular fluorescent lamps and starterholders (IEC 60400:1999 (MOD))


I.S. EN 60470:2000304.

High-voltage alternating current contactors and contactor-based motor starters (IEC60470:1999 (EQV))


I.S. EN 60531:2000305.

Household electric thermal storage room heaters - Methods for measuring performance(IEC 60531:1999 (MOD))


I.S. EN 61000-4-28:2000306.

Electromagnetic compatibility (EMC) -- Part 4-28: Testing and measurement techniques- Variation of power frequency, immunity test (IEC 61000-4-28:1999 (EQV))


I.S. EN 61073-1:2000307.

Mechanical splices and fusion splice protectors for optical fibres and cables -- Part 1:Generic specification (IEC 61073-1:1999 (EQV))


I.S. EN 61076-7:2000308.

Connectors for use in d.c., low-frequency analogue and digital high speed dataapplications -- Part 7: Cable outlet accessories with assessed quality, includingqualification and capability approval - Sectional specification (IEC 61076-7:2000 (EQV))


Date: 18/07/2018

I.S. EN 61189-2:1997/A1:2000309.

Test methods for electrical materials, printed boards and other interconnectionstructures and assemblies -- Part 2: Test methods for materials for interconnectionstructures (IEC 61189-2:1997/A1:2000 (EQV))


I.S. EN 61243-2:1997/A1:2000310.

Live working - Voltage detectors -- Part 2: Resistive type to be used for voltages of 1 kVto 36 kV a.c. (IEC 61243-2:1995/A1:1999 (EQV))


I.S. EN 61290-3:2000311.

Optical fibre amplifiers - Basic specification -- Part 3: Test methods for noise figureparameters (IEC 61290-3:2000 (EQV))


I.S. EN 61290-5-1:2000312.

Optical fibre amplifiers - Basic specification -- Part 5-1: Test methods for reflectanceparameters - Optical spectrum analyser (IEC 61290-5-1:2000 (EQV))


I.S. EN 61300-2-24:2000313.

Fibre optic interconnecting devices and passive components - Basic test andmeasurement procedures -- Part 2-24: Tests - Screen testing of ceramic alignment splitsleeve by stress application (IEC 61300-2-24:1999 (EQV))


I.S. EN 61300-3-24:2000314.

Fibre optic interconnecting devices and passive components - Basic test andmeasurement procedures -- Part 3-24: Examinations and measurements - Keyingaccuracy of optical connectors for polarization maintaining fibre (IEC 61300-3-24:1999(EQV))


I.S. EN 61338-1-3:2000315.

Waveguide type dielectric resonators -- Part 1-3: General information and test conditions- Measurement method of complex relative permittivity for dielectric resonator materialsat microwave frequency (IEC 61338-1-3:1999 (EQV))


I.S. EN 61683:2000316.

Photovoltaic systems - Power conditioners - Procedure for measuring efficiency (IEC61683:1999 (EQV))


I.S. EN 61690-1:2000317.

Electronic Design Interchange Format (EDIF) -- Part 1: Version 3 0 0 (IEC 61690-1:2000(EQV))


I.S. EN 61690-2:2000318.

Electronic Design Interchange Format (EDIF) -- Part 2: Version 4 0 0 (IEC 61690-2:2000(EQV))


I.S. EN 61726:2000319.

Cable assemblies, cables, connectors and passive microwave components - Screeningattenuation measurement by the reverberation chamber method (IEC 61726:1999(EQV))


Date: 18/07/2018

I.S. EN 61808:2000320.

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealednickel-metal hydride button rechargeable single cells (IEC 61808:1999 (EQV))


I.S. EN 61858:2000321.

Electrical insulation systems - Thermal evaluation of modifications to an establishedwire-wound EIS (IEC 61858:1999 (EQV))


I.S. EN 61909:2000322.

Audio recording - Minidisc system (IEC 61909:2000 (EQV))


I.S. EN 62007-1:2000323.

Semiconductor optoelectronic devices for fibre optic system applications -- Part 1:Essential ratings and characteristics (IEC 62007-1:1997 (EQV) + A1:1998 (EQV))


I.S. EN 62007-2:2000324.

Semiconductor optoelectronic devices for fibre optic system applications -- Part 2:Measuring methods (IEC 62007-2:1997 (EQV) + A1:1998 (EQV))


I.S. EN 133200:1999325.

Sectional Specification: Passive filter units for electromagnetic interference suppression(Filters for which safety tests are required)


I.S. EN 170000:1999326.

Generic Specification: Waveguide type dielectric resonators


I.S. EN 60059:1999327.

IEC standard current ratings (IEC 60059:1999 (EQV))


I.S. EN 60061-2:1995/A20:1999328.



I.S. EN 60068-2-14:1999329.

Environmental testing -- Part 2: Tests - Test N: Change of temperature (IEC 60068-2-14:1984 (EQV) + A1:1986 (EQV))


I.S. EN 60068-2-33:1999330.

Environmental testing -- Part 2: Tests - Guidance on change of temperature tests (IEC60068-2-33:1971 (EQV) + A1:1978 (EQV))


I.S. EN 60068-2-40:1999331.

Environmental testing -- Part 2: Tests - Test Z/AM: Combined cold/low air pressure tests(IEC 60068-2-40:1976 (EQV) + A1:1983 (EQV))


I.S. EN 60068-2-41:1999332.

Environmental testing -- Part 2: Tests - Test Z/BM: Combined dry heat/low air pressuretests (IEC 60068-2-41:1976 (EQV) + A1:1983 (EQV))


Date: 18/07/2018

I.S. EN 60068-2-48:1999333.

Environmental testing -- Part 2: Tests - Guidance on the application of the tests of IEC60068 to simulate the effects of storage (IEC 60068-2-48:1982 (EQV))


I.S. EN 60068-2-5:1999334.

Environmental testing -- Part 2: Tests - Test Sa: Simulated solar radiation at groundlevel (IEC 60068-2-5:1975 (EQV))


I.S. EN 60068-2-50:1999335.

Environmental testing -- Part 2: Tests - Tests Z/AFc: Combined cold/vibration(sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens (IEC60068-2-50:1983 (EQV))


I.S. EN 60068-2-51:1999336.

Environmental testing -- Part 2: Tests - Tests Z/BFc: Combined dry heat/vibration(sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens (IEC60068-2-51:1983 (EQV))


I.S. EN 60068-2-74:1999337.

Environmental testing -- Part 2: Tests - Test Xc: Fluid contamination (IEC 60068-2-74:1999 (EQV))


I.S. EN 60068-2-9:1999338.

Environmental testing -- Part 2: Tests - Guidance for solar radiation testing (IEC 60068-2-9:1975 (EQV) + A1:1984 (EQV))


I.S. EN 60068-3-1:1999339.

Environmental testing -- Part 3: Background information -- Section 1: Cold and dry heattests (IEC 60068-3-1:1974 (EQV) + IEC 60068-3-1A:1978 (EQV))


I.S. EN 60068-3-2:1999340.

Environmental testing -- Part 3: Background information -- Section 2: Combinedtemperature/low air pressure tests (IEC 60068-3-2:1976 (EQV))


I.S. EN 60068-5-2:1999341.

Environmental testing -- Part 5: Guide to drafting of test methods - Terms and definitions(IEC 60068-5-2:1990 (EQV))


I.S. EN 60264-3-2:1999342.

Packaging of winding wires -- Part 3-2: Taper barrelled delivery spools - Specification forreturnable spools made from thermoplastic materials (IEC 60264-3-2:1999 (EQV))


I.S. EN 60264-3-4:1999343.

Packaging of winding wires -- Part 3-4: Taper barrelled delivery spools - Basicdimensions of containers for taper barrelled delivery spools (IEC 60264-3-4:1999 (EQV))


I.S. EN 60264-3-5:1999344.

Packaging of winding wires -- Part 3-5: Taper barrelled delivery spools - Specificationfor spool containers made from thermoplastic material (IEC 60264-3-5:1999 (EQV))


Date: 18/07/2018

I.S. EN 60268-4:1999345.

Sound system equipment -- Part 4: Microphones (IEC 60268-4:1997 (EQV))


I.S. EN 60335-2-17:1999346.

Safety of household and similar electrical appliances -- Part 2-17: Particularrequirements for blankets, pads and similar flexible heating appliances (IEC 60335-2-17:1998 (EQV))


I.S. EN 60335-2-54:1997/A1:1999347.

Safety of household and similar electrical appliances -- Part 2-54: Particularrequirements for surface-cleaning appliances for household use employing liquids orsteam (IEC 60335-2-54:1995/A1:1999 (EQV))


I.S. EN 60357:1988/A12:1999348.

Tungsten halogen lamps (non-vehicle) (IEC 60357:1982/A12:1999 (EQV))


I.S. EN 60444-1:1997/A1:1999349.

Measurement of quartz crystal unit parameters by zero phase technique in a pi-network-- Part 1: Basic method for the measurement of resonance frequency and resonanceresistance of quartz crystal units by zero phase technique in a pi-network (IEC 60444-1:1986/A1:1999 (EQV))


I.S. EN 60512-6-5:1999350.

Electromechanical components for electronic equipment - Basic testing procedures andmeasuring methods -- Part 6: Dynamic stress tests -- Section 5: Test 6e: Randomvibration (IEC 60512-6-5:1997 (MOD))


I.S. EN 60630:1998/A3:1999351.

Maximum lamp outlines for incandescent lamps (IEC 60630:1994/A3:1999 (EQV))


I.S. EN 60738-1-1:1999352.

Thermistors - Directly heated positive step-function temperature coefficient -- Part 1-1:Blank detail specification - Current limiting application - Assessment level EZ (IEC60738-1-1:1998 (EQV))


I.S. EN 60738-1-2:1999353.

Thermistors - Directly heated positive step-function temperature coefficient -- Part 1-2:Blank detail specification - Heating element application - Assessment level EZ (IEC60738-1-2:1998 (EQV))


I.S. EN 60738-1-3:1999354.

Thermistors - Directly heated positive step-function temperature coefficient -- Part 1-3:Blank detail specification - Inrush current application - Assessment level EZ (IEC 60738-1-3:1998 (EQV))


I.S. EN 60738-1-4:1999355.

Thermistors - Directly heated positive step-function temperature coefficient -- Part 1-4:Blank detail specification - Sensing application - Assessment level EZ (IEC 60738-1-4:1998 (EQV))


Date: 18/07/2018

I.S. EN 60794-1-2:1999356.

Optical fibre cables -- Part 1-2: Generic specification - Basic optical cable testprocedures (IEC 60794-1-2:1999 (EQV))


I.S. EN 60874-1:1999357.

Connectors for optical fibres and cables -- Part 1: Generic specification (IEC 60874-1:1999 (EQV))


I.S. EN 60893-3-2:1995/A1:1999358.

Specification for industrial rigid laminated sheets based on thermosetting resins forelectrical purposes -- Part 3: Specifications for individual materials -- Sheet 2:Requirements for rigid laminated sheets based on epoxide resins (IEC 60893-3-2:1993/A1:1998 (EQV))


I.S. EN 60938-1:1999359.

Fixed inductors for electromagnetic interference suppression -- Part 1: Genericspecification (IEC 60938-1:1999 (EQV))


I.S. EN 60938-2-1:1999360.

Fixed inductors for electromagnetic interference suppression -- Part 2-1: Blank detailspecification - Inductors for which safety tests are required - Assessment level D (IEC60938-2-1:1999 (EQV))


I.S. EN 60938-2-2:1999361.

Fixed inductors for electromagnetic interference suppression -- Part 2-2: Blank detailspecification - Inductors for which safety tests are required (only) (IEC 60938-2-2:1999(EQV))


I.S. EN 61209:1999362.

Maritime navigation and radiocommunication equipment and systems - Integrated bridgesystems (IBS) - Operational and performance requirements, methods of testing andrequired test results (IEC 61209:1999 (EQV))


I.S. EN 61280-4-2:1999363.

Fibre optic communication subsystem basic test procedures -- Part 4-2: Fibre opticcable plant - Single-mode fibre optic cable plant attenuation (IEC 61280-4-2:1999(EQV))


I.S. EN 61300-2-43:1999364.

Fibre optic interconnecting devices and passive components - Basic test andmeasurement procedures -- Part 2-43: Tests - Screen testing of return loss of singlemode PC optical fibre connectors (IEC 61300-2-43:1999 (EQV))


I.S. EN 61300-2-45:1999365.

Fibre optic interconnecting devices and passive components - Basic test andmeasurement procedures -- Part 2-45: Tests - Durability test by water immersion (IEC61300-2-45:1999 (EQV))


Date: 18/07/2018

I.S. EN 61300-3-17:1999366.

Fibre optic interconnecting devices and passive components - Basic test andmeasurement procedures -- Part 3-17: Examinations and measurements - Endfaceangle of angle-polished ferrules (IEC 61300-3-17:1999 (EQV))


I.S. EN 61300-3-33:1999367.

Fibre optic interconnecting devices and passive components - Basic test andmeasurement procedures -- Part 3-33: Examinations and measurements - Ferrulewithdrawal force (IEC 61300-3-33:1999 (EQV))


I.S. EN 61331-3:1999368.

Protective devices against diagnostic medical X-radiation -- Part 3: Protective clothingand protective devices for gonads (IEC 61331-3:1998 (EQV))


I.S. EN 61702:1999369.

Rating of direct coupled photovoltaic (PV) pumping systems (IEC 61702:1995 (EQV))


I.S. EN 61788-2:1999370.

Superconductivity -- Part 2: Critical current measurement - DC critical current of Nb3Sncomposite superconductors (IEC 61788-2:1999 (EQV))


I.S. EN 130200:1993/A3:1998371.

Sectional Specification: Fixed tantalum capacitors with non-solid or solid electrolyte


I.S. EN 130201:1993/A2:1998372.

Blank Detail Specification: Fixed tantalum capacitors with solid electrolyte, porous anode(sub-family 3)


I.S. EN 130300:1998373.

Sectional Specification: Aluminium electrolytic capacitors with solid and non-solidelectrolyte


I.S. EN 130500:1998374.

Sectional Specification: Fixed metallized polycarbonate film dielectric capacitors fordirect current


I.S. EN 130501:1998375.

Blank Detail Specification: Fixed metallized polycarbonate film dielectric capacitors fordirect current - Assessment level E


I.S. EN 130502:1998376.

Blank Detail Specification: Fixed metallized polycarbonate film dielectric capacitors fordirect current - Assessment level EZ


I.S. EN 133100:1998377.

Sectional Specification: Passive filter units for electromagnetic interference suppression- Filters for which safety tests are not required


Date: 18/07/2018

I.S. EN 133101:1998378.

Blank Detail Specification: Passive filter units for electromagnetic interferencesuppression - Filters for which safety tests are not required


I.S. EN 133201:1998379.

Blank Detail Specification: Passive filter units for electromagnetic interferencesuppression - Filters for which safety tests are required


I.S. EN 133221:1998380.

Blank Detail Specification: Passive filter units for electromagnetic interferencesuppression - Filters for which safety tests are required (safety tests only)


I.S. EN 166100:1998381.

Sectional Specification: Surface acoustic wave (SAW) filters


I.S. EN 168000:1993/A2:1998382.

Generic Specification: Quartz crystal units


I.S. EN 169000:1992/A1:1998383.

Generic Specification: Quartz crystal controlled oscillators


I.S. EN 186170:1998384.

Sectional Specification: Connector sets for optical fibres and cables - Type RCC


I.S. EN 196103:1998385.

Blank Detail Specification: Rotary switches - Assessment level Y


I.S. EN 196403:1998386.

Blank Detail Specification: Push button switches - Assessment level Y


I.S. EN 50107:1998387.

Signs and luminous-discharge-tube installations operating from a no-load rated outputvoltage exceeding 1 kV but not exceeding 10 kV


I.S. EN 50123-6:1998388.

Railway applications - Fixed installations - D.C. switchgear -- Part 6: D.C. switchgearassemblies


I.S. EN 50209:1998389.

Test of insulation of bars and coils of high-voltage machines


I.S. EN 60061-3:1993/A20:1998390.



I.S. EN 60118-4:1998391.

Hearing aids -- Part 4: Magnetic field strength in audio-frequency induction loops forhearing aid purposes (IEC 60118-4:1981 (EQV))


Date: 18/07/2018

I.S. EN 60118-4:1998/A1:1998392.

Hearing aids -- Part 4: Magnetic field strength in audio-frequency induction loops forhearing aid purposes (IEC 60118-4:1981/A1:1998 (EQV))


I.S. EN 60172:1994/A1:1998393.

Test procedure for the determination of the temperature index of enamelled windingwires (IEC 60172:1987/A1:1997 (EQV))


I.S. EN 60243-1:1998394.

Electrical strength of insulating materials - Test methods -- Part 1: Tests at powerfrequencies (IEC 60243-1:1998 (EQV))


I.S. EN 60255-3:1998395.

Electrical relays -- Part 3: Single input energizing quantity measuring relays withdependent or independent time (IEC 60255-3:1989 (MOD))


I.S. EN 60255-8:1998396.

Electrical relays -- Part 8: Thermal electrical relays (IEC 60255-8:1990 (MOD))


I.S. EN 60317-12:1994/A1:1998397.

Specifications for particular types of winding wires -- Part 12: Polyvinyl acetal enamelledround copper wire, class 120 (IEC 60317-12:1990/A1:1997 (EQV))


I.S. EN 60317-13:1994/A2:1998398.

Specifications for particular types of winding wires -- Part 13: Polyester or polyesterimideovercoated with polyamide-imide enamelled round copper wire, class 200 (IEC 60317-13:1990/A2:1997 (EQV))


I.S. EN 60317-15:1994/A1:1998399.

Specifications for particular types of winding wires -- Part 15: Polyesterimide enamelledround aluminium wire, class 180 (IEC 60317-15:1990/A1:1997 (EQV))


I.S. EN 60317-18:1995/A1:1998400.

Specifications for particular types of winding wires -- Part 18: Polyvinyl acetal enamelledrectangular copper wire, class 120 (IEC 60317-18:1990/A1:1997 (EQV))


I.S. EN 60317-19:1995/A1:1998401.

Specifications for particular types of winding wires -- Part 19: Solderable polyurethaneenamelled round copper wire overcoated with polyamide, class 130 (IEC 60317-19:1990/A1:1997 (EQV))


I.S. EN 60317-2:1994/A1:1998402.



I.S. EN 60317-20:1995/A1:1998403.

Specifications for particular types of winding wires -- Part 20: Solderable polyurethaneenamelled round copper wire, class 155 (IEC 60317-20:1990/A1:1997 (EQV))


Date: 18/07/2018

I.S. EN 60317-21:1995/A1:1998404.

Specifications for particular types of winding wires -- Part 21: Solderable polyurethaneenamelled round copper wire overcoated with polyamide, class 155 (IEC 60317-21:1990/A1:1997 (EQV))


I.S. EN 60317-22:1995/A1:1998405.

Specifications for particular types of winding wires -- Part 22: Polyester or polyesterimideenamelled round copper wire overcoated with polyamide, class 180 (IEC 60317-22:1990/A1:1997 (EQV))


I.S. EN 60317-23:1995/A1:1998406.

Specifications for particular types of winding wires -- Part 23: Solderable polyesterimideenamelled round copper wire, class 180 (IEC 60317-23:1990/A1:1997 (EQV))


I.S. EN 60317-25:1996/A2:1998407.

Specifications for particular types of winding wires -- Part 25: Polyester or polyesterimideovercoated with polyamide-imide enamelled round aluminium wire, class 200 (IEC60317-25:1990/A2:1997 (EQV))


I.S. EN 60317-26:1998/A1:1998408.

Specifications for particular types of winding wires -- Part 26: Polyamide-imideenamelled round copper wire, class 200 (IEC 60317-26:1990/A1:1997 (EQV))


I.S. EN 60317-28:1996/A1:1998409.

Specifications for particular types of winding wires -- Part 28: Polyesterimide enamelledrectangular copper wire, class 180 (IEC 60317-28:1990/A1:1997 (EQV))


I.S. EN 60317-29:1998/A1:1998410.

Specifications for particular types of winding wires -- Part 29: Polyester or polyesterimideovercoated with polyamide-imide enamelled rectangular copper wire, class 200 (IEC60317-29:1990/A1:1997 (EQV))


I.S. EN 60317-30:1996/A1:1998411.

Specifications for particular types of winding wires -- Part 30: Polyimide enamelledrectangular copper wire, class 220 (IEC 60317-30:1990/A1:1997 (EQV))


I.S. EN 60317-35:1994/A1:1998412.



I.S. EN 60317-36:1994/A1:1998413.

Specifications for particular types of winding wires -- Part 36: Solderable polyesterimideenamelled round copper wire, class 180, with a bonding layer (IEC 60317-36:1992/A1:1997 (EQV))


I.S. EN 60317-37:1994/A1:1998414.

Specifications for particular types of winding wires -- Part 37: Polyesterimide enamelledround copper wire, class 180, with a bonding layer (IEC 60317-37:1992/A1:1997 (EQV))


Date: 18/07/2018

I.S. EN 60317-38:1994/A1:1998415.

Specifications for particular types of winding wires -- Part 38: Polyester or polyesterimideovercoated with polyamide-imide enamelled round copper wire, class 200, with abonding layer (IEC 60317-38:1992/A1:1997 (EQV))


I.S. EN 60317-4:1994/A1:1998416.

Specifications for particular types of winding wires -- Part 4: Solderable polyurethaneenamelled round copper wire, class 130 (IEC 60317-4:1990/A1:1997 (EQV))


I.S. EN 60317-7:1994/A2:1998417.

Specifications for particular types of winding wires -- Part 7: Polyimide enamelled roundcopper wire, class 220 (IEC 60317-7:1990/A2:1997 (EQV))


I.S. EN 60317-8:1994/A2:1998418.

Specifications for particular types of winding wires -- Part 8: Polyesterimide enamelledround copper wire, class 180 (IEC 60317-8:1990/A2:1997 (EQV))


I.S. EN 60318-1:1998419.

Electroacoustics - Simulators of human head and ear -- Part 1: Ear simulator for thecalibration of supra-aural earphones (IEC 60318-1:1998 (EQV))


I.S. EN 60335-2-2:1995/A1:1998420.

Safety of household and similar electrical appliances -- Part 2-2: Particular requirementsfor vacuum cleaners and water suction cleaning appliances (IEC 60335-2-2:1993/A1:1998 (EQV))


I.S. EN 60335-2-35:1998421.

Safety of household and similar electrical appliances -- Part 2-35: Particularrequirements for instantaneous water heaters (IEC 60335-2-35:1997 (EQV))


I.S. EN 60335-2-7:1997/A1:1998422.

Safety of household and similar electrical appliances -- Part 2-7: Particular requirementsfor washing machines (IEC 60335-2-7:1993/A1:1998 (EQV))


I.S. EN 60335-2-9:1995/A1:1998423.

Safety of household and similar electrical appliances -- Part 2-9: Particular requirementsfor grills, toasters and similar portable cooking appliances (IEC 60335-2-9:1993/A1:1998(EQV))


I.S. EN 60404-2:1998424.

Magnetic materials -- Part 2: Methods of measurement of the magnetic properties ofelectrical steel sheet and strip by means of an Epstein frame (IEC 60404-2:1996 (EQV))


I.S. EN 60431:1997/A2:1998425.

Dimensions of square cores (RM-cores) made of magnetic oxides and associated parts(IEC 60431:1983/A2:1996 (EQV))


Date: 18/07/2018

I.S. EN 60512-14-7:1998426.

Electromechanical components for electronic equipment - Basic testing procedures andmeasuring methods -- Part 14: Sealing tests -- Section 7: Test 14g: Impacting water(IEC 60512-14-7:1997 (EQV))


I.S. EN 60534-2-1:1998427.

Industrial-process control valves -- Part 2-1: Flow capacity - Sizing equations for fluidflow under installed conditions (IEC 60534-2-1:1998 (EQV))


I.S. EN 60603-1:1998428.

Connectors for frequencies below 3 MHz for use with printed boards -- Part 1: Genericspecification - General requirements and guide for the preparation of detailspecifications, with assessed quality (IEC 60603-1:1991 (EQV) + A1:1992 (EQV))


I.S. EN 60603-10:1998429.

Connectors for frequencies below 3 MHz for use with printed boards -- Part 10: Two-partconnectors for printed boards for basic grid of 2,54 mm (0,1 in), inverted type (IEC60603-10:1991 (EQV))


I.S. EN 60603-12:1998430.

Connectors for frequencies below 3 MHz for use with printed boards -- Part 12: Detailspecification for dimensions, general requirements and tests for a range of socketsdesigned for use with integrated circuits (IEC 60603-12:1992 (EQV))


I.S. EN 60603-13:1998431.

Connectors for frequencies below 3 MHz for use with printed boards -- Part 13: Detailspecification for two-part connectors of assessed quality, for printed boards for basicgrid of 2,54 mm (0,1 in), with free connectors for non-accessible insulation displacementterminations (ID) (IEC 60603-13:1995 (EQV))


I.S. EN 60603-2:1998432.

Connectors for frequencies below 3 MHz for use with printed boards -- Part 2: Detailspecification for two-part connectors with assessed quality, for printed boards, for basicgrid of 2,54 mm (0,1 in) with common mounting features (IEC 60603-2:1995 (EQV))


I.S. EN 60603-3:1998433.

Connectors for frequencies below 3 MHz for use with printed boards -- Part 3: Two-partconnectors for printed boards having contacts spaced at 2,54 mm (0,1 in) centres andstaggered terminations at that same spacing (IEC 60603-3:1987 (EQV))


I.S. EN 60603-4:1998434.

Connectors for frequencies below 3 MHz for use with printed boards -- Part 4: Two-partconnectors for printed boards having contacts spaced at 1,91 mm (0,075 in) centres andstaggered terminations at that same spacing (IEC 60603-4:1987 (EQV))


I.S. EN 60603-5:1998435.

Connectors for frequencies below 3 MHz for use with printed boards -- Part 5: Edge-socket connectors and two-part connectors for double-sided printed boards with 2,54mm (0,1 in) spacing (IEC 60603-5:1987 (EQV))


Date: 18/07/2018

I.S. EN 60603-6:1998436.

Connectors for frequencies below 3 MHz for use with printed boards -- Part 6: Edge-socket connectors and printed-board connectors with 2,54 mm (0,1 in) contact spacingfor single or double-sided printed boards of 1,6 mm (0,063 in) nominal thickness (IEC60603-6:1987 (EQV))


I.S. EN 60603-8:1998437.

Connectors for frequencies below 3 MHz for use with printed boards -- Part 8: Two-partconnectors for printed boards, for basic grid of 2,54 mm (0,1 in), with square malecontacts of 0,63 mm x 0,63 mm (IEC 60603-8:1990 (EQV))


I.S. EN 60603-9:1998438.

Connectors for frequencies below 3 MHz for use with printed boards -- Part 9: Two-partconnectors for printed boards, backpanels and cable connectors, basic grid of 2,54 mm(0,1 in) (IEC 60603-9:1990 (EQV))


I.S. EN 60674-1:1998439.

Specification for plastic films for electrical purposes -- Part 1: Definitions and generalrequirements (IEC 60674-1:1980 (EQV))


I.S. EN 60675:1995/A1:1998440.

Household electric direct-acting room heaters - Methods for measuring performance(IEC 60675:1994/A1:1998 (EQV))


I.S. EN 60679-1:1998441.

Quartz crystal controlled oscillators of assessed quality -- Part 1: Generic specification(IEC 60679-1:1997 (EQV))


I.S. EN 60679-5:1998442.

Quartz crystal controlled oscillators of assessed quality -- Part 5: Sectional specification- Qualification approval (IEC 60679-5:1998 (EQV))


I.S. EN 60679-5-1:1998443.

Quartz crystal controlled oscillators of assessed quality -- Part 5-1: Blank detailspecification - Qualification approval (IEC 60679-5-1:1998 (EQV))


I.S. EN 60684-3-136:1998444.

Flexible insulating sleeving -- Part 3: Specification for individual types of sleeving --Sheet 136: Extruded fluorosilicone sleeving - General purpose (IEC 60684-3-136:1997(EQV))


I.S. EN 60730-1:1995/A14:1998445.

Automatic electrical controls for household and similar use -- Part 1: Generalrequirements


I.S. EN 60730-2-5:1995/A2:1998446.

Automatic electrical controls for household and similar use -- Part 2: Particularrequirements for automatic electrical burner control systems (IEC 60730-2-5:1993/A2:1997 (EQV))


Date: 18/07/2018

I.S. EN 60811-2-1:1998447.

Insulating and sheathing materials of electric and optical cables - Common test methods-- Part 2-1: Methods specific to elastomeric compounds - Ozone resistance, hot set andmineral oil immersion tests (IEC 60811-2-1:1998 (EQV))


I.S. EN 60942:1998448.

Electroacoustics - Sound calibrators (IEC 60942:1997 (EQV))


I.S. EN 61076-4-105:1998449.

Connectors with assessed quality, for use in d.c., low frequency analogue and in digitalhigh-speed data applications -- Part 4: Printed board connectors -- Section 105 : Detailspecification for 9 mm circular connector with 3 to 8 contacts for use in a wide range ofapplications including the telecommunication and audio industry (IEC 61076-4-105:1995


I.S. EN 61108-2:1998450.

Maritime navigation and radiocommunication equipment and systems - Globalnavigation satellite systems (GNSS) -- Part 2: Global navigation satellite system(GLONASS) - Receiver equipment - Performance standards, methods of testing andrequired test results (IEC 61108-2:1998 (EQV))


I.S. EN 61161:1994/A1:1998451.

Ultrasonic power measurement in liquids in the frequency range 0,5 MHz to 25 MHz(IEC 61161:1992/A1:1998 (EQV))


I.S. EN 61188-1-2:1998452.

Printed boards and printed board assemblies - Design and use -- Part 1-2: Genericrequirements - Controlled impedance (IEC 61188-1-2:1998 (EQV))


I.S. EN 61234-2:1998453.

Electrical insulating materials - Methods of test for the hydrolytic stability -- Part 2:Moulded thermosets (IEC 61234-2:1997 (EQV))


I.S. EN 61277:1998454.

Terrestrial photovoltaic (PV) power generating systems - General and guide (IEC61277:1995 (EQV))


I.S. EN 61280-1-1:1998455.

Fibre optic communication subsystem basic test procedures -- Part 1-1: Test proceduresfor general communication subsystems - Transmitter output optical power measurementfor single-mode optical fibre cable (IEC 61280-1-1:1998 (EQV))


I.S. EN 61280-2-4:1998456.

Fibre optic communication subsystem basic test procedures -- Part 2-4: Test proceduresfor digital systems - Bit-rate tolerance measurement (IEC 61280-2-4:1998 (EQV))


I.S. EN 61280-2-5:1998457.

Fibre optic communication subsystem basic test procedures -- Part 2-5: Test proceduresfor digital systems - Jitter transfer function measurement (IEC 61280-2-5:1998 (EQV))


Date: 18/07/2018

I.S. EN 61290-1-1:1998458.

Optical fibre amplifiers - Basic specification -- Part 1-1: Test methods for gainparameters - Optical spectrum analyzer (IEC 61290-1-1:1998 (EQV))


I.S. EN 61290-1-2:1998459.

Optical fibre amplifiers - Basic specification -- Part 1-2: Test methods for gainparameters - Electrical spectrum analyzer (IEC 61290-1-2:1998 (EQV))


I.S. EN 61290-1-3:1998460.

Optical fibre amplifiers - Basic specification -- Part 1-3: Test methods for gainparameters - Optical power meter (IEC 61290-1-3:1998 (EQV))


I.S. EN 61290-2-1:1998461.

Optical fibre amplifiers - Basic specification -- Part 2-1: Test methods for optical powerparameters - Optical spectrum analyzer (IEC 61290-2-1:1998 (EQV))


I.S. EN 61290-2-2:1998462.

Optical fibre amplifiers - Basic specification -- Part 2-2: Test methods for optical powerparameters - Electrical spectrum analyzer (IEC 61290-2-2:1998 (EQV))


I.S. EN 61290-2-3:1998463.

Optical fibre amplifiers - Basic specification -- Part 2-3: Test methods for optical powerparameters - Optical power meter (IEC 61290-2-3:1998 (EQV))


I.S. EN 61290-6-1:1998464.

Optical fibre amplifiers - Basic specification -- Part 6-1: Test methods for pump leakageparameters - Optical demultiplexer (IEC 61290-6-1:1998 (EQV))


I.S. EN 61290-7-1:1998465.

Optical fibre amplifiers - Basic specification -- Part 7-1: Test methods for out-of-bandinsertion losses - Filtered optical power meter (IEC 61290-7-1:1998 (EQV))


I.S. EN 61300-3-23:1998466.

Fibre optic interconnecting devices and passive components - Basic test andmeasurement procedures -- Part 3-23: Examination and measurements - Fibre positionrelative to ferrule endface (IEC 61300-3-23:1998 (EQV))


I.S. EN 61305-2:1998467.

Household high-fidelity audio equipment and systems - Methods of measuring andspecifying the performance -- Part 2: FM radio tuners (IEC 61305-2:1997 (EQV))


I.S. EN 61362:1998468.

Guide to specification of hydraulic turbine control systems (IEC 61362:1998 (EQV))


I.S. EN 61378-1:1998469.

Convertor transformers -- Part 1: Transformers for industrial applications (IEC 61378-1:1997 (EQV))


Date: 18/07/2018

I.S. EN 61595-2:1998470.

Multichannel digital audio tape recorder (DATR), reel-to-reel system, for professionaluse -- Part 2: Format B (IEC 61595-2:1997 (EQV))


I.S. EN 61675-1:1998471.

Radionuclide imaging devices - Characteristics and test conditions -- Part 1: Positronemission tomographs (IEC 61675-1:1998 (EQV))


I.S. EN 61675-2:1998472.

Radionuclide imaging devices - Characteristics and test conditions -- Part 2: Singlephoton emission computer tomographs (IEC 61675-2:1998 (EQV))


I.S. EN 61724:1998473.

Photovoltaic system performance monitoring - Guidelines for measurement, dataexchange and analysis (IEC 61724:1998 (EQV))


I.S. EN 61800-1:1998474.

Adjustable speed electrical power drive systems -- Part 1: General requirements -Rating specifications for low voltage adjustable speed d.c. power drive systems (IEC61800-1:1997 (EQV))


I.S. EN 61829:1998475.

Crystalline silicon photovoltaic (PV) array - On-site measurement of I-V characteristics(IEC 61829:1995 (EQV))


I.S. EN 61834-4:1998476.

Recording - Helical-scan digital video cassette recording system using 6,35 mmmagnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) -- Part4: Pack header table and contents (IEC 61834-4:1998 (EQV))


I.S. EN 61847:1998477.

Ultrasonics - Surgical systems - Measurement and declaration of the basic outputcharacteristics (IEC 61847:1998 (EQV))


I.S. EN 81714-2:1998478.

Design of graphical symbols for use in the technical documentation of products -- Part 2:Specification for graphical symbols in a computer sensible form, including graphicalsymbols for a reference library, and requirements for their interchange (IEC 81714-2:1998 (EQV))


I.S. EN 130901:1997479.

Blank Detail Specification: Fixed polystyrene film dielectric metal foil d.c. capacitors -Assessment level E


I.S. EN 55022:1994/A2:1997480.

Limits and methods of measurement of radio disturbance characteristics of informationtechnology equipment (CISPR 22:1993/A2:1996 (MOD))


I.S. EN 60076-2:1997481.

Power transformers -- Part 2: Temperature rise (IEC 60076-2:1993 (MOD))


Date: 18/07/2018

I.S. EN 60107-8:1997482.

Recommended methods of measurement on receivers for television broadcasttransmissions -- Part 8: Measurement on D2-MAC/packet equipment (IEC 60107-8:1997(EQV))


I.S. EN 60835-2-4:1995/A1:1997483.

Methods of measurement for equipment used in digital microwave radio transmissionsystems -- Part 2: Measurements on terrestrial radio-relay systems -- Section 4:Transmitter/receiver including modulator/demodulator (IEC 60835-2-4:1993/A1:1997(EQV))


I.S. EN 60874-17:1997484.

Connectors for optical fibres and cables -- Part 17: Sectional specification for fibre opticconnector - Type F-05 (friction lock) (IEC 60874-17:1995 (EQV) + corrigendum May1996 (EQV))


I.S. EN 61243-1:1997/A1:1997485.

Live working - Voltage detectors -- Part 1: Capacitive type to be used for voltagesexceeding 1 kV a.c. and up to 52 kV (IEC 61243-1:1993/A1:1997 (EQV))


I.S. EN 61274-1-1:1997486.

Fibre optic adaptors -- Part 1-1: Blank detail specification (IEC 61274-1-1:1994 (EQV))


I.S. EN 61580-6:1997487.

Methods of measurement for waveguides -- Part 6: Return loss on waveguide andwaveguide assemblies (IEC 61580-6:1995 (EQV))


I.S. EN 123600:1996488.

Sectional Specification: Flex-rigid multilayer printed boards with through connections


I.S. EN 123700:1996489.

Sectional Specification: Flex-rigid double sided printed board with through connections


I.S. EN 123800:1996490.

Sectional Specification: Flexible multilayer printed boards with through connections


I.S. EN 50203:1996491.

Automatic channel installation (ACI)


I.S. EN 50212:1996492.

Connectors for thermoelectric sensors


I.S. EN 60276:1996493.

Definitions and nomenclature for carbon brushes, brush-holders, commutators and slip-rings (IEC 60276:1968 (EQV) + A1:1987 (EQV))


I.S. EN 60517:1996494.

Gas-insulated metal-enclosed switchgear for rated voltages of 72,5 kV and above (IEC60517:1990 (EQV) + A1:1994 (EQV) + corrigendum Apr. 1995 (EQV))


Date: 18/07/2018

I.S. EN 60669-2-1:1996495.

Switches for household and similar fixed-electrical installations -- Part 2: Particularrequirements -- Section 1: Electronic switches (IEC 60669-2-1:1984 (EQV) + IEC 60669-2-1:1994 (MOD) + A1:1994 (MOD) + A2:1995 (EQV))


I.S. EN 60094-2:1995496.

Magnetic tape sound recording and reproducing systems -- Part 2: Calibration tapes(IEC 60094-2:1994 (EQV))


I.S. EN 60335-2-6:1990/A52:1995497.

Safety of household and similar electrical appliances -- Part 2: Particular requirementsfor cooking ranges, cooking tables, ovens and similar appliances for household use


I.S. EN 60835-1-2:1993/A1:1995498.

Methods of measurement for equipment used in digital microwave radio transmissionsystems -- Part 1: Measurements common to terrestrial radio-relay systems and satelliteearth stations -- Section 2: Basic characteristics (IEC 60835-1-2:1992/A1:1995 (EQV))


I.S. EN 61010-2-051:1995499.

Safety requirements for electrical equipment for measurement, control, and laboratoryuse -- Part 2-051: Particular requirements for laboratory equipment for mechanicalmixing and stirring (IEC 61010-2-051:1995 (EQV))


I.S. EN 61119-5:1995500.

Digital audio tape cassette system (DAT) -- Part 5: DAT for professional use (IEC 61119-5:1993 (EQV))


I.S. EN 60172:1994501.

Test procedure for the determination of the temperature index of enamelled windingwires (IEC 60172:1987 (EQV))


I.S. EN 60810:1994502.

Lamps for road vehicles - Performance requirements (IEC 60810:1993 (EQV))


I.S. EN 61254:1994503.

Electric shavers for household use - Methods for measuring the performance (IEC61254:1993 (EQV))


I.S. EN 120008:1993504.

Blank Detail Specification: Light emitting diodes and infrared emitting diodes for fibreoptic system or sub-system


I.S. EN 186000-1:1993505.

Generic Specification: Connector sets for optical fibres and cables -- Part 1:Requirements, test methods and qualification approval procedures


I.S. EN 186001:1993506.

Blank Detail Specification: Connectors for optical fibres and cables - Environmentalcategory I


Date: 18/07/2018

I.S. EN 186002:1993507.

Blank Detail Specification: Connectors for optical fibres and cables - Environmentalcategory II


I.S. EN 186003:1993508.

Blank Detail Specification: Connectors for optical fibres and cables - Environmentalcategory III


I.S. EN 186004:1993509.

Blank Detail Specification: Connectors for optical fibres and cables - Environmentalcategory IV


I.S. EN 186005:1993510.

Blank Detail Specification: Connectors for optical fibres and cables - Environmentalcategory V


I.S. EN 190100:1993511.

Sectional Specification: Digital monolithic integrated circuits


I.S. EN 61131-3:1993512.

Programmable controllers -- Part 3: Programming languages (IEC 61131-3:1993 (EQV))


I.S. EN 112000:1992513.

Generic Specification: Image converter and image intensifier tubes


I.S. EN 116000-2:1992514.

Generic Specification: Electromechanical all-or-nothing relays -- Part 2: Generic dataand methods of test for time delay relays


I.S. EN 60679-4:1998515.

Quartz crystal controlled oscillators of assessed quality -- Part 4: Sectional specification- Capability approval (IEC 60679-4:1997 (EQV))


I.S. 821:2006516.

Gas pressure regulating stations for distribution

28 APRIL 2006Date published

I.S. 355:2006517.

Specification for helmets for hurling and camogie players

24 MARCH 2006Date published

I.S. EN 61315:2006518.

Calibration of fibre-optic power meters (IEC 61315:2005 (EQV))


I.S. EN 61338-1-4:2006519.

Waveguide type dielectric resonators -- Part 1-4: General information and test conditions- Measurement method of complex relative permittivity for dielectric resonator materialsat millimetre-wave frequency (IEC 61338-1-4:2005 (EQV))


Date: 18/07/2018

I.S. EN 61543:1995/A2:2006520.

Residual current-operated protective devices (RCDs) for household and similar use -Electromagnetic compatibility (IEC 61543:1995/A2:2005 (EQV))


I.S. EN 62132-1:2006521.

Integrated circuits - Measurement of electromagnetic immunity, 150 kHz to 1 GHz -- Part1: General conditions and definitions (IEC 62132-1:2006 (EQV))


I.S. HD 22.3 S4:2004/A1:2006522.

Cables of rated voltages up to and including 450/750 V and having cross-linkedinsulation -- Part 3: Heat resistant silicone rubber insulated cables


I.S. EN ISO 8092-2:2006523.

Road vehicles - Connections for on-board electrical wiring harnesses - Part 2:Definitions, test methods and general performance requirements (ISO 8092-2:2005)


I.S. EN ISO 16070:2006524.

Petroleum and natural gas industries - Downhole equipment - Lock mandrels andlanding nipples (ISO 16070:2005)


I.S. EN ISO 13503-3:2006525.

Petroleum and natural gas industries - Completion fluids and materials - Part 3: Testingof heavy brines (ISO 13503-3:2005)


I.S. EN 934-6:2001/A1:2006526.

Admixtures for concrete, mortar and grout - Part 6: Sampling, conformity control andevaluation of conformity


I.S. EN ISO 3834-1:2006527.

Quality requirements for fusion welding of metallic materials - Part 1: Criteria for theselection of the appropriate level of qualityrequirements (ISO 3834-1:2005)


I.S. EN ISO 3834-2:2006528.

Quality requirements for fusion welding of metallic materials - Part 2: Comprehensivequality requirements (ISO 3834-2:2005)


I.S. EN ISO 3834-3:2006529.

Quality requirements for fusion welding of metallic materials - Part 3: Standard qualityrequirements (ISO 3834-3:2005)


I.S. EN ISO 3834-4:2006530.

Quality requirements for fusion welding of metallic materials - Part 4: Elementary qualityrequirements (ISO 3834-4:2005)


I.S. EN ISO 2560:2006531.

Welding consumables - Covered electrodes for manual metal arc welding of non-alloyand fine grain steels - Classification (ISO 2560:2002)


Date: 18/07/2018

I.S. EN ISO 3834-5:2006532.

Quality requirements for fusion welding of metallic materials - Part 5: Documents withwhich it is necessary to conform to claim conformity to the quality requirements of ISO3834-2, ISO 3834-3 or ISO 3834-4 (ISO 3834-5:2005)


I.S. CEN ISO TR 20173:2006533.

Welding - Grouping systems for materials - American materials (ISO/TR 20173:2005)


I.S. CEN ISO TR 20174:2006534.

Welding - Grouping systems for materials - Japanese materials (ISO/TR 20174:2005)


I.S. CEN TS 15087:2006535.

Determination of the uplift resistance of installed clay and concrete interlocking tiles forroofing - Test method for mechanical fasteners


I.S. EN ISO 4254-1:2006536.

Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2005)


I.S. EN 12851:2006537.

Food processing machinery - Catering attachments for machines having an auxiliarydrive hub - Safety and hygiene requirements


I.S. EN 469:2006538.

Protective clothing for firefighters - Performance requirements for protective clothing forfirefighting


I.S. EN 13063-1:2006539.

Chimneys - System chimneys with clay/ceramic flue liners - Part 1: Requirements andtest methods for sootfire resistance


I.S. EN 14945:2006540.

Refractory products and materials - Spectrometric determination of chromium (VI) inchrome bearing refractories, before and after use


I.S. EN 14727:2006541.

Laboratory furniture - Storage units for laboratories - Requirements and test methods


I.S. EN ISO 14644-3:2006542.

Cleanrooms and associated controlled environments - Part 3: Test methods (ISO 14644-3:2005)


I.S. EN ISO 16484-6:2006543.

Building automation and control systems (BACS) - Part 6: Data communicationconformance testing (ISO 16484-6:2005)


I.S. EN 14535-1:2006544.

Railway applications - Brake discs for railway rolling stock - Part 1: Brake discs pressedor shrunk onto the axle or drive shaft, dimensions and quality requirements


Date: 18/07/2018

I.S. EN 13480-6:2004/A1:2006545.

Metallic industrial piping - Part 6: Additional requirements for buried piping


I.S. EN ISO 5840:2006546.

Cardiovascular implants - Cardiac valve prostheses (ISO 5840:2005)


I.S. CEN TS 15148:2006547.

Solid biofuels - Method for the determination of the content of volatile matter


I.S. EN 3373-013:2006548.

Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors -Part 013: In-line splices, insulated and moisture resistant, for crimping on copperconductors, temperature up to 260 °C - Product standard


I.S. EN 3373-012:2006549.

Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors -Part 012: In-line splices, insulated and sealed, for crimping on copper conductors,temperature up to 150 °C - Product standard


I.S. CEN TR 1749:2006550.

European scheme for the classification of gas appliances according to the method ofevacuation of the combustion products (types)


I.S. EN ISO 6506-1:2006551.

Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2005)


I.S. EN ISO 6506-2:2006552.

Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testingmachines (ISO 6506-2:2005)


I.S. EN ISO 6506-3:2006553.

Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks (ISO6506-3:2005)


I.S. EN ISO 6507-1:2006554.

Metallic materials - Vickers hardness test - Part 1: Test method (ISO 6507-1:2005)


I.S. EN ISO 6507-2:2006555.

Metallic materials - Vickers hardness test - Part 2: Verification and calibration of testingmachines (ISO 6507-2:2005)


I.S. EN ISO 6507-3:2006556.

Metallic materials - Vickers hardness test - Part 3: Calibration of reference blocks (ISO6507-3:2005)


I.S. EN ISO 6508-1:2006557.

Metallic materials - Rockwell hardness test - Part 1: Test method (scales A, B, C, D, E,F, G, H, K, N, T) (ISO 6508-1:2005)


Date: 18/07/2018

I.S. EN ISO 6508-2:2006558.

Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testingmachines (scales A, B, C, D, E, F, G, H, K, N, T) (ISO 6508-2:2005)


I.S. EN ISO 6508-3:2006559.

Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks(scales A, B, C, D, E, F, G, H, K, N, T) (ISO 6508-3:2005)


I.S. EN ISO 6506-4:2006560.

Metallic materials - Brinell hardness test - Part 4: Table of hardness values (ISO 6506-4:2005)


I.S. EN ISO 6507-4:2006561.

Metallic materials - Vickers hardness test - Part 4: Tables and hardness values (ISO6507-4:2005)


I.S. EN ISO 19901-7:2006562.

Petroleum and natural gas industries - Specific requirements for offshore structures -Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units(ISO 19901-7:2005)


I.S. EN 40-4:2006563.

Lighting columns - Part 4: Requirements for reinforced and prestressed concrete lightingcolumns


I.S. EN 71-8:2003/A2:2006564.

Safety of toys - Part 8: Swings, slides and similar activity toys for indoor and outdoorfamily domestic use


I.S. EN 54-17:2006565.

Fire detection and fire alarm systems - Part 17: Short-circuit isolators


I.S. EN 54-18:2006566.

Fire detection and fire alarm systems - Part 18: Input/output devices


I.S. EN 14706:2006567.

Thermal insulation products for building equipment and industrial installations -Determination of maximum service temperature


I.S. EN 1504-3:2006568.

Products and systems for the protection and repair of concrete structures - Definitions,requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural repair


I.S. EN 986:2006569.

Textile floor coverings - Tiles - Determination of dimensional changes due to the effectsof varied water and heat conditions and distortion out of plane


Date: 18/07/2018

I.S. EN 1318:2006570.

Textile floor coverings - Determination of the apparent effective thickness of the backing


I.S. EN 14802:2006571.

Plastics piping systems - Thermoplastics shafts or risers for inspection chambers andmanholes - Determination of resistance against surface and traffic loading


I.S. EN ISO 10931:2006572.

Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) -Specifications for components and the system (ISO 10931:2005)


I.S. EN 1078:1997/A1:2006573.

Helmets for pedal cyclists and for users of skateboards and roller skates


I.S. EN 1080:1997/A2:2006574.

Impact protection helmets for young children


I.S. EN 352-5:2002/A1:2006575.

Hearing protectors - Safety requirements and testing - Part 5: Active noise reductionear-muffs


I.S. EN 14255-2:2006576.

Measurement and assessment of personal exposures to incoherent optical radiation -Part 2: Visible and infrared radiation emitted by artificial sources in the workplace


I.S. EN 680:2006577.

Determination of the drying shrinkage of autoclaved aerated concrete


I.S. EN 14343:2006578.

Rotary positive displacement pumps - Performance tests for acceptance


I.S. EN 1034-6:2006579.

Safety of machinery - Safety requirements for the design and construction of papermaking and finishing machines - Part 6: Calender


I.S. EN 1275:2006580.

Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluationof basic fungicidal or basic yeasticidal activity of chemical disinfectants and antiseptics -Test method and requirements (phase 1)


I.S. EN 1040:2006581.

Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluationof basic bactericidal activity of chemical disinfectants and antiseptics - Test method andrequirements (phase 1)


Date: 18/07/2018

I.S. EN 1657:2006582.

Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluationof fungicidal or yeasticidal activity of chemical disinfectants and antiseptics used in theveterinaryarea - Test method and requirements (phase 2, step 1)


I.S. EN 14337:2006583.

Heating Systems in buildings - Design and installation of direct electrical room heatingsystems


I.S. EN 14621:2006584.

Textiles - Multifilament yarns - Methods of test for textured or non-textured filamentyarns


I.S. EN 1103:2006585.

Textiles - Fabrics for apparel - Detailed procedure to determine the burning behaviour


I.S. CEN TR 15253:2006586.

Health informatics - Quality of service requirements for health information interchange


I.S. EN 14223:2006587.

Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and otherconcrete surfaces trafficable by vehicles - Determination of water absorption


I.S. EN 14224:2006588.

Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and otherconcrete surfaces trafficable by vehicles - Determination of crack bridging ability


I.S. EN 14752:2006589.

Railway applications - Bodyside entrance systems


I.S. EN 14863:2006590.

Vitreous and porcelain enamels - Determination of the edge covering on enamelled steelplate to be used in heat exchangers


I.S. EN 12581:2006591.

Coating plants - Machinery for dip coating and electrodeposition of organic liquid coatingmaterial - Safety requirements


I.S. EN 14663:2006592.

Foodstuffs - Determination of vitamin B6 (including its glycosylated forms) by HPLC


I.S. CEN TS 15213-1:2006593.

Road transport and traffic telematics - After-theft systems for the recovery of stolenvehicles - Part 1: Reference architecture and terminology


I.S. EN 14841:2006594.

LPG equipment and accessories - Discharge procedures for LPG rail tankers


Date: 18/07/2018

I.S. EN 14767:2006595.

LPG equipment and accessories - Transportable refillable composite cylinders forLiquefied Petroleum Gas (LPG) - Periodic inspection


I.S. EN 12252:2006596.

LPG equipment and accessories - Equipping of LPG road tankers


I.S. EN 14899:2006597.

Characterization of waste - Sampling of waste materials - Framework for the preparationand application of a Sampling Plan


I.S. CEN TS 15331:2006598.

Criteria for design, management and control of maintenance services for buildings


I.S. EN 14943:2006599.

Transport services - Logistics - Glossary of terms


I.S. EN 14764:2006600.

City and trekking bicycles - Safety requirements and test methods


I.S. EN 2602:2006601.

Aerospace series - Ports for adaptors, threaded, with lockring - Geometric configuration


I.S. EN 2603:2006602.

Aerospace series - Port ends for adaptors, threaded, with lockring - Geometricconfiguration


I.S. EN 2604:2006603.

Aerospace series – 8° 30' interface for adaptors, threaded, with lockring - Geometricconfiguration


I.S. EN 2605:2006604.

Aerospace series – 24° interface for adaptors, threaded, with lockring - Geometricconfiguration


I.S. EN 2607:2006605.

Aerospace series - O-rings for adaptors, threaded, with lockring - Survey


I.S. EN 2608:2006606.

Aerospace series - Installation and removal requirements for 8° 30' adaptors, threaded,with lockring


I.S. EN 2645:2006607.

Aerospace series - Lockrings for adaptors, threaded, with lockring - Dimensions


I.S. EN 3155-008:2006608.

Aerospace series - Electrical contacts used in elements of connection - Part 008:Contacts, electrical, male, type A, crimp, class S - Product standard


Date: 18/07/2018

I.S. EN 3155-018:2006609.

Aerospace series - Electrical contacts used in elements of connection - Part 018:Contacts, electrical, male, type A, crimp, class S - Product standard


I.S. EN 3155-019:2006610.

Aerospace series - Electrical contacts used in elements of connection - Part 019:Contacts, electrical, female, type A, crimp, class S - Product standard


I.S. EN 9110:2006611.

Aerospace series - Quality systems - Model for quality assurance applicable tomaintenance organizations


I.S. EN 9120:2006612.

Aerospace series - Quality management systems - Requirements for stockist distributors(based on ISO 9001:2000)


I.S. EN 9111:2006613.

Aerospace series - Quality management systems - Assessment applicable tomaintenance organizations (based on ISO 9001:2000)


I.S. EN 9121:2006614.

Aerospace series - Quality management systems - Assessment applicable to stockistdistributors (based on ISO 9001:2000)


I.S. EN 4179:2006615.

Aerospace series - Qualification and approval of personnel for non-destructive testing


I.S. EN 2266-003:2006616.

Aerospace series - Cables, electrical, for general purpose - Operating temperaturesbetween - 55 °C and 200 °C - Part 003: Ink jet printable - Product standard


I.S. EN 2713-003:2006617.

Aerospace series - Cables, electrical, single and multicore for general purpose -Operating temperatures between - 55 °C and 200 °C - Part 003: Screened (spiral) andjacketed, ink jetprintable - Product standard


I.S. EN 2713-007:2006618.

Aerospace series - Cables, electrical, single and multicore forgeneral purpose - Operating temperatures between - 55 °C and 200 °C - Part 007:Screened (spiral) and jacketed, UV laser printable - Product standard


I.S. EN 3745-501:2006619.

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 501:Optical fibre proof test


I.S. EN 3745-502:2006620.

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 502:Tensile stength for short length of optical fibres


Date: 18/07/2018

I.S. EN 2335:2006621.

Aerospace series - Bearings, spherical plain in corrosion resisting steel withoutassembly slot - Dimensions and loads


I.S. EN 2336:2006622.

Aerospace series - Bearings, spherical plain in steel with assembly slots - Dimensionsand loads


I.S. EN 4176:2006623.

Aerospace series - Lockbolts, 100 countersunk normal head or protruding head,tension- / sheartype, close tolerance, in titanium alloy TI-P64001, anodized or withaluminium pigmented coating - Collars in titanium TI-P99002 or aluminium alloy 2024 -Metric series - Technical specification


I.S. EN 4303:2006624.

Aerospace series - Sleeves, tubular, for tension screws with flush head, in corrosionresisting steel, passivated, (0,25 mm wall thickness)


I.S. EN 4304:2006625.

Aerospace series - Sleeves, tubular, for shear screws with flush head, in corrosionresisting steel, passivated, (0,25 mm wall thickness)


I.S. EN 4306:2006626.

Aerospace series - Sleeves, tubular, for tension screws with flush head, in corrosionresisting steel, passivated, (0,50 mm wall thickness)


I.S. EN 4307:2006627.

Aerospace series - Sleeves, tubular, for shear screws with flush head, in corrosionresisting steel, passivated, (0,50 mm wall thickness)


I.S. EN 4496:2006628.

Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess,close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminiumpigmented coating - Classification: 1 100 MPa (at ambient temperature) / 315 °C


I.S. EN 4497:2006629.

Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normalshank, short thread, in titanium alloy, anodized, with aluminium pigmented coating -Classification: 1 100 MPa (at ambient temperature) / 315 °C


I.S. EN 4498:2006630.

Aerospace series - Bolts, large bihexagonal head, close tolerance normal shank,medium length thread, in heat resisting nickel base alloy, passivated, with aluminiumpigmented coating- Classification: 1 550 MPa (at ambient temperature) / 315 °C


I.S. EN 4590:2006631.

Aerospace series - Retainers, spring, sheet metal, for selflocking barrel nuts, incorrosion resisting steel, passivated


Date: 18/07/2018

I.S. EN 4591:2006632.

Aerospace series - Nuts, barrel, self-locking, floating, selfaligning, in heat resisting nickelbase alloy, MoS2 lubricated - Classification: 1 550 MPa (at ambient temperature) / 315 °C


I.S. EN 10296-2:2006633.

Welded circular steel tubes for mechanical and general engineering purposes -Technical delivery conditions - Part 2: Stainless steel


I.S. EN 10297-2:2006634.

Seamless steel tubes for mechanical and general engineering purposes - Technicaldelivery conditions - Part 2: Stainless steel


I.S. CWA 15464-1:2006635.

Humanitarian Mine Action - EOD Competency Standards - Part 1: General requirements


I.S. CWA 15464-2:2006636.

Humanitarian Mine Action - EOD Competency Standards - Part 2: Competency matrix


I.S. CWA 15464-3:2006637.

Humanitarian Mine Action - EOD Competency Standards - Part 3: Competency for EODlevel 1


I.S. CWA 15464-4:2006638.



I.S. CWA 15464-5:2006639.



I.S. EN 14965:2006640.

Inland navigation vessels - Flat bollards


I.S. EN 71-10:2006641.

Safety of toys - Part 10: Organic chemical compounds - Sample preparation andextraction


I.S. EN 1866:2006642.

Mobile fire extinguishers


I.S. EN 1011-6:2006643.

Welding - Recommendation for welding of metallic materials - Part 6: Laser beamwelding


I.S. CEN TS 13381-1:2006644.

Test methods for determining the contribution to the fire resistance of structuralmembers - Part 1: Horizontal protective membranes


Date: 18/07/2018

I.S. EN 13501-5:2006645.

Fire classification of construction products and building elements - Part 5: Classificationusing data from external fire exposure to roofs tests


I.S. EN 13501-3:2006646.

Fire classification of construction products and building elements - Part 3: Classificationusing data from fire resistance tests on products and elements used in building serviceinstallations: fire resisting ducts and fire dampers


I.S. EN 1873:2006647.

Prefabricated accessories for roofing - Individual roof lights of plastics - Productspecification and test methods


I.S. EN 15088:2006648.

Aluminium and aluminium alloys - Structural products for construction works - Technicalconditions for inspection and delivery


I.S. EN 13102:2006649.

Ceramic machines - Safety - Loading and unloading of fine clay tiles


I.S. CEN TS 12666-2:2006650.

Plastics piping systems for non-pressure underground drainage and sewerage -Polyethylene (PE) - Part 2: Guidance for the assessment of conformity


I.S. EN 14758-1:2006651.

Plastics piping systems for non-pressure underground drainage and sewerage -Polypropylene with mineral modifiers (PP-MD) - Part 1: Specifications for pipes, fittingsand the system


I.S. EN 12666-1:2006652.

Plastics piping systems for non-pressure underground drainage and sewerage -Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system


I.S. EN 14652:2006653.

Water conditioning equipment inside buildings - Membrane separation devices -Requirements for performance, safety and testing


I.S. EN 14519:2006654.

Solid softwood panelling and cladding - Machined profiles with tongue and groove


I.S. CEN TS 14417:2006655.

Geosynthetic barriers - Test method for the determination of the influence of wetting-drying cycles on the permeability of clay geosynthetic barriers


I.S. CEN TS 14418:2006656.

Geosynthetic barriers - Test method for the determination of the influence of freezing-thawing cycles on the permeability of clay geosynthetic barriers


Date: 18/07/2018

I.S. EN 1067:2006657.

Adhesives - Examination and preparation of samples for testing


I.S. EN 827:2006658.

Adhesives - Determination of conventional solids content and constant mass solidscontent


I.S. EN 1034-2:2006659.

Safety of machinery - Safety requirements for the design and construction of papermaking and finishing machines - Part 2: Barking drums


I.S. EN 1034-5:2006660.

Safety of machinery - Safety requirements for the design and construction of papermaking and finishing machines - Part 5: Sheeters


I.S. EN 14809:2006661.

Surfaces for sports areas - Determination of vertical deformation


I.S. EN 14836:2006662.

Synthetic surfaces for outdoor sports areas - Exposure to artificial weathering


I.S. EN 14808:2006663.

Surfaces for sports areas - Determination of shock absorption


I.S. EN 14866:2006664.

Vitreous and porcelain enamels - Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers - Specifications


I.S. EN 14884:2006665.

Air quality - Stationary source emissions - Determination of total mercury: automatedmeasuring systems


I.S. EN 12472:2006666.

Method for the simulation of wear and corrosion for the detection of nickel release fromcoated items


I.S. EN 14913:2006667.

LPG equipment and accessories - Transportable refillable welded steel cylinders forLiquefied Petroleum Gas (LPG) - Alternative design and construction; procedure forchecking before, during and after filling


I.S. EN 14914:2006668.

LPG equipment and accessories - Transportable refillable welded steel cylinders forLiquefied Petroleum Gas (LPG) - Alternative design and construction; periodicinspection


I.S. EN 14912:2006669.

LPG equipment and accessories - Inspection and maintenance of LPG cylinder valvesat time of periodic inspection of cylinders


Date: 18/07/2018

I.S. EN 14427:2004/A1:2006670.

Transportable refillable composite cylinders for LPG - Design and construction


I.S. CEN TS 15210-1:2006671.

Solid biofuels - Methods for the determination of mechanical durability of pellets andbriquettes - Part 1: Pellets


I.S. CEN TS 15210-2:2006672.

Solid biofuels - Methods for the determination of mechanical durability of pellets andbriquettes - Part 2: Briquettes


I.S. EN 1060-3:1997/A1:2006673.

Non-invasive sphygmomanometers - Part 3: Supplementary requirements for electro-mechanical blood pressure measuring systems


I.S. EN 71-5:1993/A1:2006674.

Safety of toys - Part 5: Chemical toys (sets) other than experimental sets


I.S. EN 516:2006675.

Prefabricated accessories for roofing - Installations for roof access - Walkways, treadsand steps


I.S. EN 14782:2006676.

Self-supporting metal sheet for roofing, external cladding and internal lining - Productspecification and requirements


I.S. EN ISO 22867:2006677.

Forestry machinery - Vibration test code for portable hand-held machines with internalcombustion engine - Vibration at the handles (ISO 22867:2004)


I.S. EN 13534:2006678.

Food processing machinery - Curing injection machines - Safety and hygienerequirements


I.S. EN 1564:1997/A1:2006679.

Founding - Austempered ductile cast irons


I.S. EN 1996-2:2006680.

Eurocode 6 - Design of masonry structures - Part 2: Design considerations, selection ofmaterials and execution of masonry


I.S. EN 1996-3:2006681.

Eurocode 6 - Design of masonry structures - Part 3: Simplified calculation methods forunreinforced masonry structures


I.S. EN 12312-15:2006682.

Aircraft ground support equipment - Specific requirements - Part 15: Baggage andequipment tractors


Date: 18/07/2018

I.S. EN ISO 10297:2006683.

Transportable gas cylinders - Cylinder valves - Specification and type testing (ISO10297:2006)


I.S. EN ISO 15848-1:2006684.

Industrial valves - Measurement, test and qualification procedures for fugitive emissions- Part 1: Classification system and qualification procedures for type testing of valves(ISO15848-1:2006)


I.S. EN 13108-21:2006685.

Bituminous mixtures - Material specifications - Part 21: Factory Production Control


I.S. EN 14188-3:2006686.

Joint fillers and sealants - Part 3: Specifications for preformed joint seals


I.S. EN 13108-20:2006687.

Bituminous mixtures - Material specifications - Part 20: Type Testing


I.S. EN 13321-1:2006688.

Open data communication in building automation, controls and building management -Home and building electronic system - Part 1: Product and system requirements


I.S. EN 14970:2006689.

Textiles - Knitted fabrics - Determination of stitch length and yarn linear density in weftknitted fabrics


I.S. EN 14971:2006690.

Textiles - Knitted fabrics - Determination of number of stitches per unit length and unitarea


I.S. EN ISO 10308:2006691.

Metallic coatings - Review of porosity tests (ISO 10308:2006)


I.S. EN 12621:2006692.

Machinery for the supply and circulation of coating materials under pressure - Safetyrequirements


I.S. EN ISO 10272-1:2006693.

Microbiology of food and animal feeding stuffs - Horizontal method for detection andenumeration of Campylobacter spp. - Part 1: Detection method (ISO 10272-1:2006)


I.S. EN ISO 21871:2006694.

Microbiology of food and animal feeding stuffs - Horizontal method for the determinationof low numbers of presumptive Bacillus cereus - Most probable number technique anddetectionmethod (ISO 21871:2006)


I.S. EN 14475:2006695.

Execution of special geotechnical works - Reinforced fill


Date: 18/07/2018

I.S. EN ISO 4098:2006696.

Leather - Chemical tests - Determination of water-soluble matter, water-solubleinorganic matter and water-soluble organic matter (ISO 4098:2006)


I.S. EN ISO 2419:2006697.

Leather — Physical and mechanical tests — Sample preparation and conditioning (ISO2419:2006)


I.S. EN ISO 5943:2006-10698.

Cheese and processed cheese products - Determination of chloride content -Potentiometric titration method (ISO 5943:2004)

20 NOVEMBER 2006Date published

I.S. EN 10329:2006699.

Steel tubes and fittings for onshore and offshore pipelines - External field joint coatings


I.S. EN 60684-3-212:2006700.

Flexible insulating sleeving -- Part 3: Specifications for individual types of sleeving --Sheet 212: Heat-shrinkable polyolefin sleevings (IEC 60684-3-212:2005 (EQV))


I.S. EN 60371-3-5:2006701.

Insulating materials based on mica -- Part 3: Specifications for individual materials --Sheet 5: Glass-backed mica paper with an epoxy resin binder for post-impregnation(VPI) (IEC 60371-3-5:2005 (EQV))


I.S. EN 60371-3-2:2006702.

Insulating materials based on mica -- Part 3: Specifications for individual materials --Sheet 2: Mica paper (IEC 60371-3-2:2005 (EQV))


I.S. HD 629.2 S2:2006703.

Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42) kV -- Part 2: Cables with impregnated paper insulation


I.S. HD 629.1 S2:2006704.

Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42) kV -- Part 1: Cables with extruded insulation


I.S. EN 62305-4:2006705.

Protection against lightning -- Part 4: Electrical and electronic systems within structures(IEC 62305-4:2006 (EQV))


I.S. EN 62305-3:2006706.

Protection against lightning -- Part 3: Physical damage to structures and life hazard (IEC62305-3:2006 (MOD))


I.S. EN 62305-2:2006707.

Protection against lightning -- Part 2: Risk management (IEC 62305-2:2006 (EQV))


I.S. EN 62305-1:2006708.

Protection against lightning -- Part 1: General principles (IEC 62305-1:2006 (EQV))


Date: 18/07/2018

I.S. EN 61347-2-3:2001/A2:2006709.

Lamp controlgear -- Part 2-3: Particular requirements for a.c. supplied electronic ballastsfor fluorescent lamps (IEC 61347-2-3:2000/A2:2006 (EQV))


I.S. EN 61347-2-8:2001/A1:2006710.

Lamp controlgear -- Part 2-8: Particular requirements for ballasts for fluorescent lamps(IEC 61347-2-8:2000/A1:2006 (EQV))


I.S. EN 61967-4:2002/A1:2006711.

Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz --Part 4: Measurement of conducted emissions - 1 ohm/150 ohm direct coupling method(IEC 61967-4:2002/A1:2006 (EQV))


I.S. EN 60060-3:2006712.

High voltage test techniques -- Part 3: Definitions and requirements for on-site tests (IEC60060-3:2006 (EQV))


I.S. EN 60384-13:2006713.

Fixed capacitors for use in electronic equipment -- Part 13: Sectional specification -Fixed polypropylene film dielectric metal foil d.c. capacitors (IEC 60384-13:2006 (EQV))


I.S. EN 60384-13-1:2006714.

Fixed capacitors for use in electronic equipment -- Part 13-1: Blank detail specification -Fixed polypropylene film dielectric metal foil d.c. capacitors - Assessment level E (IEC60384-13-1:2006 (EQV))


I.S. EN 60384-19:2006715.

Fixed capacitors for use in electronic equipment -- Part 19: Sectional specification -Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors(IEC 60384-19:2006 (EQV))


I.S. EN 60384-19-1:2006716.

Fixed capacitors for use in electronic equipment -- Part 19-1: Blank detail specification -Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors- Assessment level EZ (IEC 60384-19-1:2006 (EQV))


I.S. EN 60684-3-233:2006717.

Flexible insulating sleeving -- Part 3: Specifications for individual types of sleeving --Sheet 233: Heat-shrinkable fluoroelastomer sleeving, flame retarded, fluid resistant,shrink ratio 2:1 (IEC 60684-3-233:2006 (EQV))


I.S. EN 60705:1999/A2:2006718.

Household microwave ovens - Methods for measuring performance (IEC60705:1999/A2:2006 (EQV))


I.S. EN 61300-3-29:2006719.

Fibre optic interconnecting devices and passive components - Basic test andmeasurement procedures -- Part 3-29: Examinations and measurements - Measurementtechniques for characterizing the amplitude of the spectral transfer function of DWDMcomponents (IEC 61300-3-29:2005 (EQV))


Date: 18/07/2018

I.S. EN 61347-2-1:2001/A1:2006720.

Lamp controlgear -- Part 2-1: Particular requirements for starting devices (other thanglow starters) (IEC 61347-2-1:2000/A1:2005 (EQV))


I.S. EN 61347-2-2:2001/A1:2006721.

Lamp controlgear -- Part 2-2: Particular requirements for d.c. or a.c. supplied electronicstep-down convertors for filament lamps (IEC 61347-2-2:2000/A1:2005 (EQV))


I.S. EN 62040-2:2006722.

Uninterruptible power systems (UPS) -- Part 2: Electromagnetic compatibility (EMC)requirements (IEC 62040-2:2005 (EQV))


I.S. EN 62217:2006723.

Polymeric insulators for indoor and outdoor use with a nominal voltage > 1 000 V -General definitions, test methods and acceptance criteria (IEC 62217:2005 (EQV))


I.S. EN 1256:2006724.

Gas welding equipment - Specification for hose assemblies for equipment for welding,cutting and allied processes


I.S. EN 12259-1:1999+A1:2001/A3:2006725.

Fixed firefighting systems - Components for sprinkler and water spray systems - Part 1:Sprinklers


I.S. EN 1021-1:2006726.

Furniture - Assessment of the ignitability of upholstered furniture - Part 1: Ignition sourcesmouldering cigarette


I.S. EN 1021-2:2006727.

Furniture - Assessment of the ignitability of upholstered furniture - Part 2: Ignition sourcematch flame equivalent


I.S. EN 14675:2006728.

Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluationof virucidal activity of chemical disinfectants and antiseptics used in the veterinary area -Test method and requirements (phase 2, step 1)


I.S. EN 1860-1:2003/A1:2006729.

Appliances, solid fuels and firelighters for barbecuing - Part 1: Barbecues burning solidfuels - Requirements and test methods


I.S. EN 1860-3:2003/A1:2006730.

Appliances, solid fuels and firelighters for barbecuing - Firelighters for igniting solid fuelsfor use in barbecue - Requirements and test methods


I.S. EN 14872:2006731.

Bicycles - Accessories for bicycles - Luggage carriers


Date: 18/07/2018

I.S. CEN TR 15314:2006732.

Durability of wood and wood-based products - Quantitative determination of quaternaryammonium compounds in wood


I.S. EN 71-2:2006733.

Safety of toys - Part 2: Flammability


I.S. CEN TR 15131:2006734.

Thermal performance of building materials - The use of interpolating equations inrelation to thermal measurement on thick specimens - Guarded hot plate and heat flowmeterapparatus


I.S. CEN TS 15291:2006735.

Identification card system - Guidance on design for accessible card-activated devices


I.S. EN 12435:2006736.

Health informatics - Expression of results of measurements in health sciences


I.S. CEN TR 15214-1:2006737.

Characterization of sludges - Detection and enumeration of Escherichia coli in sludges,soils, soil improvers, growing media and biowastes - Part 1: Membrane filtration methodfor quantification


I.S. CEN TR 15214-2:2006738.

Characterization of sludges - Detection and enumeration of Escherichia coli in sludges,soils, soil improvers, growing media and biowastes - Part 2: Miniaturised method (MostProbable Number) by inoculation in liquid medium


I.S. CEN TR 15214-3:2006739.

Characterization of sludges - Detection and enumeration of Escherichia coli in sludges,soils, soil improvers, growing media and biowastes - Part 3: Macromethod (MostProbable Number) in liquid medium


I.S. CEN TR 15215-1:2006740.

Characterization of sludges - Detection and enumeration of Salmonella spp. in sludges,soils, soil improvers, growing media and biowastes - Part 1: Membrane filtration methodfor quantitative resuscitation of sub-lethally stressed bacteria (to confirm efficacy of logdrop treatment procedures)


I.S. CEN TR 15215-2:2006741.

Characterization of sludges - Detection and enumeration ofSalmonella spp. in sludges, soils, soil improvers, growing mediaand biowastes - Part 2: Liquid enrichment method in selenitecystine medium followed byRapport-Vassiliadis for semiquantitative Most Probable Number (MPN) determination


I.S. CEN TR 15215-3:2006742.

Characterization of sludges - Detection and enumeration of Salmonella spp. in sludges,soils, soil improvers, growing media and biowastes - Part 3: Presence/absence methodby liquid enrichment in peptone-novobiocin medium followed by Rapport-Vassiliadis


Date: 18/07/2018

I.S. EN 12976-2:2006743.

Thermal solar systems and components - Factory made systems - Part 2: Test methods


S.R. CEN TS 15149-1:2006744.

Solid biofuels - Methods for the determination of particle size distribution - Part 1:Oscillating screen method using sieve apertures of 3,15 mm and above


S.R. CEN TS 15149-2:2006745.

Solid biofuels - Methods for the determination of particle size distribution - Part 2:Vibrating screen method using sieve apertures of 3,15 mm and below


I.S. EN 12976-1:2006746.

Thermal solar systems and components - Factory made systems - Part 1: Generalrequirements


S.R. CEN TS 15149-3:2006747.

Solid biofuels - Methods for the determination of particle size distribution - Part 3: Rotaryscreen method


I.S. EN 14585-1:2006748.

Corrugated metal hose assemblies for pressure applications - Part 1: Requirements


I.S. CEN TR 14585-2:2006749.

Corrugated metal hose assemblies for pressure applications - Part 2: Guidance on theuse of conformity assessment procedures


I.S. EN 50419:2006750.

Marking of electrical and electronic equipment in accordance with Article 11(2) ofDirective 2002/96/EC (WEEE)


I.S. EN 60929:2006751.

AC-supplied electronic ballasts for tubular fluorescent lamps - Performancerequirements (IEC 60929:2006 (EQV))


I.S. EN 60512-12-2:2006752.

Connectors for electronic equipment - Tests and measurements -- Part 12-2: Solderingtests - Test 12b: Solderability, wetting, soldering iron method (IEC 60512-12-2:2006(EQV))


I.S. EN 60512-12-3:2006753.

Connectors for electronic equipment - Tests and measurements -- Part 12-3: Solderingtests - Test 12c: Solderability, de-wetting (IEC 60512-12-3:2006 (EQV))


I.S. EN 60512-12-4:2006754.

Connectors for electronic equipment - Tests and measurements -- Part 12-4: Solderingtests - Test 12d: Resistance to soldering heat, solder bath method (IEC 60512-12-4:2006 (EQV))


Date: 18/07/2018

I.S. EN 60512-13-1:2006755.

Connectors for electronic equipment - Tests and measurements -- Part 13-1:Mechanical operation tests - Test 13a: Engaging and separating forces (IEC 60512-13-1:2006 (EQV))


I.S. EN 60512-9-3:2006756.

Connectors for electronic equipment - Tests and measurements -- Part 9-3: Endurancetests - Test 9c: Mechanical operation (engaging/separating) with electrical load (IEC60512-9-3:2006 (EQV))


I.S. EN 60512-12-5:2006757.

Connectors for electronic equipment - Tests and measurements -- Part 12-5: Solderingtests - Test 12e: Resistance to soldering heat, soldering iron method (IEC 60512-12-5:2006 (EQV))


I.S. EN 60512-13-5:2006758.

Connectors for electronic equipment - Tests and measurements -- Part 13-5:Mechanical operation tests - Test 13e: Polarizing and keying method (IEC 60512-13-5:2006 (EQV))


I.S. EN 60512-13-2:2006759.

Connectors for electronic equipment - Tests and measurements -- Part 13-2:Mechanical operation tests - Test 13b: Insertion and withdrawal forces (IEC 60512-13-2:2006 (EQV))


I.S. EN 50310:2006760.

Application of equipotential bonding and earthing in buildings with informationtechnology equipment


I.S. EN 55013:2001/A2:2006761.

Sound and television broadcast receivers and associated equipment - Radiodisturbance characteristics - Limits and methods of measurement (CISPR13:2001/A2:2006 (EQV))


I.S. EN 60335-2-43:2003/A1:2006762.

Household and similar electrical appliances - Safety -- Part 2-43: Particular requirementsfor clothes dryers and towel rails (IEC 60335-2-43:2002/A1:2005 (EQV))


I.S. EN 60335-2-67:2003/A1:2006763.

Household and similar electrical appliances - Safety -- Part 2-67: Particular requirementsfor floor treatment and floor cleaning machines, for industrial and commercial use (IEC60335-2-67:2002/A1:2005 (EQV))


I.S. CLC TR 50450:2006764.

Resistibility requirements for equipment having (a) telecommunication port(s)


I.S. EN 60335-2-68:2003/A1:2006765.

Household and similar electrical appliances - Safety -- Part 2-68: Particular requirementsfor spray extraction appliances, for industrial and commercial use (IEC 60335-2-68:2002/A1:2005 (EQV))


Date: 18/07/2018

I.S. EN 60335-1:2003/A12:2006766.

Household and similar electrical appliances - Safety -- Part 1: General requirements


I.S. EN 61377-1:2006767.

Railway applications - Rolling stock -- Part 1: Combined testing of inverter-fedalternating current motors and their control system (IEC 61377-1:2006 (EQV))


I.S. EN 62271-108:2006768.

High-voltage switchgear and controlgear -- Part 108: High-voltage alternating currentdisconnecting circuit-breakers for rated voltages of 72,5 kV and above (IEC 62271-108:2005 (EQV))


I.S. EN ISO 4263-3:2006769.

Petroleum and related products - Determination of the ageing behaviour of inhibited oilsand fluids - TOST test - Part 3: Anhydrous procedure for synthetic hydraulic fluids (ISO4263-3:2006)


I.S. EN ISO 4263-4:2006770.

Petroleum and related products - Determination of the ageing behaviour of inhibited oilsand fluids - TOST test - Part 4: Procedure for industrial gear oils (ISO 4263-4:2006)


I.S. EN ISO 2814:2006771.

Paints and varnishes - Comparison of contrast ratio (hiding power) of paints of the sametype and colour (ISO 2814:1973)


I.S. EN ISO 6504-1:2006772.

Paints and varnishes - Determination of hiding power - Part 1: Kubelka-Munk method forwhite and light-coloured paints (ISO 6504-1:1983)


I.S. EN ISO 11997-2:2006773.

Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part2: Wet (salt fog)/dry/humidity/UV light (ISO 11997-2:2000)


I.S. EN ISO 11997-1:2006774.

Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part1: Wet (salt fog)/dry/humidity (ISO 11997-1:2005)


I.S. EN ISO 14680-1:2006775.

Paints and varnishes - Determination of pigment content - Part 1: Centrifuge method(ISO 14680-1:2000)


I.S. EN ISO 14680-2:2006776.

Paints and varnishes - Determination of pigment content - Part 2: Ashing method (ISO14680-2:2000)


I.S. EN ISO 14680-3:2006777.

Paints and varnishes - Determination of pigment content - Part 3: Filtration method (ISO14680-3:2000)


Date: 18/07/2018

I.S. EN ISO 10283:2006778.

Binders for paints and varnishes - Determination of monomeric diisocyanates inpolyisocyanate resins (ISO 10283:1997)


I.S. EN ISO 4625-1:2006779.

Binders for paints and varnishes - Determination of softening point - Part 1: Ring-and-ball method (ISO 4625-1:2004)


I.S. EN ISO 4625-2:2006780.

Binders for paints and varnishes - Determination of softening point - Part 2: Cup-and-ballmethod (ISO 4625-2:2004)


I.S. EN ISO 15715:2006781.

Binders for paints and varnishes - Determination of turbidity (ISO 15715:2003)


I.S. EN ISO 22870:2006782.

Point-of-care testing (POCT) - Requirements for quality and competence (ISO22870:2006)


I.S. EN 1796:2006783.

Plastics piping systems for water supply with or without pressure - Glass-reinforcedthermosetting plastics (GRP) based on unsaturated polyester resin (UP)


I.S. EN ISO 12402-8:2006784.

Personal flotation devices - Part 8: Accessories - Safety requirements and test methods(ISO 12402-8:2006)


I.S. EN 12574-2:2006785.

Stationary waste containers - Part 2: Performance requirements and test methods


I.S. EN 12574-3:2006786.

Stationary waste containers - Part 3: Safety and health requirements


I.S. EN 12574-1:2006787.

Stationary waste containers - Part 1: Containers with a capacity up to 10 000 l with flator dome lid(s), for trunnion, double trunnion or pocket lifting device - Dimensions anddesign


I.S. CEN TR 15349:2006788.

Hardware for furniture - Terms for extension elements and their components


I.S. EN ISO 10524-1:2006789.

Pressure regulators for use with medical gases - Part 1: Pressure regulators andpressure regulators with flow-metering devices (ISO 10524-1:2006)


Date: 18/07/2018

I.S. EN ISO 23631:2006790.

Water quality - Determination of dalapon, trichloroacetic acid and selected haloaceticacids - Method using gas chromatography (GC-ECD and/or GC-MS detection) afterliquidliquid extraction and derivatization (ISO 23631:2006)


I.S. EN ISO 105-C12:2006791.

Textiles - Tests for colour fastness - Part C12: Colour fastness to industrial laundering(ISO 105-C12:2004)


I.S. EN ISO 4892-2:2006792.

Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps(ISO 4892-2:2006)


I.S. EN ISO 16000-9:2006793.

Indoor air - Part 9: Determination of the emission of volatile organic compounds frombuilding products and furnishing - Emission test chamber method (ISO 16000-9:2006)


I.S. EN ISO 16000-10:2006794.

Indoor air - Part 10: Determination of the emission of volatile organic compounds frombuilding products and furnishing - Emission test cell method (ISO 16000-10:2006)


I.S. EN ISO 16000-11:2006795.

Indoor air - Part 11: Determination of the emission of volatile organic compounds frombuilding products and furnishing - Sampling, storage of samples and preparation of testspecimens(ISO 16000-11:2006)


I.S. EN ISO 24276:2006796.

Foodstuffs - Methods of analysis for the detection of genetically modified organisms andderived products - General requirements and definitions (ISO 24276:2006)


I.S. EN 14570:2005/A1:2006797.

LPG equipment and accessories - Equipping of LPG tanks overground and underground


I.S. EN 1425:1999/A1:2006798.

Bitumen and bituminous binders - Characterization of perceptible properties


I.S. EN ISO 3785:2006799.

Metallic materials - Designation of test specimen axes in relation to product texture (ISO3785:2006)


I.S. CWA 15499-1:2006800.

Personal Data Protection Audit Framework (EU Directive EC 95/46) - Part I: BaselineFramework


I.S. CWA 15499-2:2006801.

Personal Data Protection Audit Framework (EU Directive EC 95/46) - Part II: Checklists,questionnaires and templates for users of the framework


Date: 18/07/2018

I.S. EN 14870-3:2006802.

Petroleum and natural gas industries - Induction bends, fittings and flanges for pipelinetransportation systems - Part 3: Flanges (ISO 15590-3:2004, modified)


I.S. EN ISO 13500:2006803.

Petroleum and natural gas industries - Drilling fluid materials - Specifications and tests(ISO 13500:2006)


I.S. EN 13322-1:2003/A1:2006804.

Transportable gas cylinders - Refillable welded steel gas cylinders - Design andconstruction - Part 1: Carbon steel


I.S. EN 13126-8:2006805.

Building hardware - Requirements and test methods for windows and doors heightwindows - Part 8: Tilt&Turn, Tilt-First and Turn-Only hardware


I.S. EN 13126-1:2006806.

Building hardware - Requirements and test methods for windows and doors heightwindows - Part 1: Requirements common to all types of hardware


I.S. EN 153:2006807.

Methods of measuring the energy consumption of electric mains operated householdrefrigerators, frozen food storage cabinets, food freezers and their combinations,together with associatedcharacteristics


I.S. EN 13445-3:2002/A5:2006808.

Unfired pressure vessels - Part 3: Design


I.S. EN ISO 6360-7:2006809.

Dentistry - Number coding system for rotary instruments - Part 7: Specific characteristicsof mandrels and special instruments (ISO 6360-7:2006)


I.S. EN ISO 21469:2006810.

Safety of machinery - Lubricants with incidental product contact - Hygiene requirements(ISO 21469:2006)


I.S. CEN ISO TR 20172:2006811.

Welding - Grouping systems for materials - European materials (ISO/TR 20172:2006)


I.S. EN 517:2006812.

Prefabricated accessories for roofing - Roof safety hooks


I.S. EN 14741:2006813.

Thermoplastics piping and ducting systems - Joints for buried non-pressure applications- Test method for the long-term sealing performance of joints with elastomeric seals byestimating the sealing pressure


Date: 18/07/2018

I.S. EN ISO 1167-1:2006814.

Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -Determination of the resistance to internal pressure - Part 1: General method (ISO 1167-1:2006)


I.S. EN ISO 1167-2:2006815.

Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -Determination of the resistance to internal pressure - Part 2: Preparation of pipe testpieces (ISO 1167-2:2006)


I.S. EN ISO 12402-10:2006816.

Personal flotation devices - Part 10: Selection and application of personal flotationdevices and other relevant devices (ISO 12402-10:2006)


I.S. EN ISO 10322-1:2006817.

Ophthalmic optics - Semi-finished spectacle lens blanks - Part 1: Specifications forsingle-vision and multifocal lens blanks (ISO 10322-1:2006)


I.S. EN ISO 10322-2:2006818.

Ophthalmic optics - Semi-finished spectacle lens blanks - Part 2: Specifications forprogressive power lens blanks (ISO 10322- 2:2006)


I.S. EN 14761:2006819.

Wood flooring - Solid wood parquet - Vertical finger, wide finger and module brick


I.S. EN 14762:2006820.

Wood flooring - Sampling procedures for evaluation of conformity


I.S. EN 521:2006821.

Specifications for dedicated liquefied petroleum gas appliances - Portable vapourpressure liquefied petroleum gas appliances


I.S. EN 1071-4:2006822.

Advanced technical ceramics - Methods of test for ceramic coatings - Part 4:Determination of chemical composition by electron probe microanalysis (EPMA)


I.S. EN 581-1:2006823.

Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 1:General safety requirements


I.S. EN 14187-9:2006824.

Cold applied joint sealants - Test methods - Part 9: Function testing of joint sealants


I.S. EN ISO 22478:2006825.

Water quality - Determination of certain explosives and related compounds - Methodusing high-performance liquid chromatography (HPLC) with UV detection (ISO22478:2006)


Date: 18/07/2018

I.S. EN 14959:2006826.

Touch and close fasteners - Determination of resistance to fraying after washing


I.S. EN 13421:2006827.

Plastics - Thermoset moulding compounds - Composites and reinforcement fibres -Preparation of specimens for determining the anisotropy of the properties ofcompression moulding composites


I.S. EN ISO 12086-1:2006828.

Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 1:Designation system and basis for specifications (ISO 12086-1:2006)


I.S. EN ISO 12086-2:2006829.

Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2:Preparation of test specimens and determination of properties (ISO 12086-2:2006)


I.S. EN 15016-4:2006830.

Technical drawings - Railway applications - Part 4: Dataexchange


I.S. EN 14979:2006831.

Packaging - Flexible plastic/metal laminate tubes - Dimensions and tolerances of nozzleS 13


I.S. EN 14678-1:2006832.

LPG equipment and accessories - Construction and performance of LPG equipment forautomotive filling stations - Part 1: Dispensers


I.S. EN 15002:2006833.

Characterization of waste - Preparation of test portions from the laboratory sample


I.S. EN 10184:2006834.

Chemical analysis of ferrous materials - Determination of phosphorus in non-alloyedsteels and irons - Molybdenum blue spectrophotometric method


I.S. EN 61499-4:2006835.

Function blocks -- Part 4: Rules for compliance profiles (IEC 61499-4:2005 (EQV))


I.S. EN 62403:2006836.

High density recording format on CD-R/RW disc system - HD-BURN format (IEC62403:2005 (EQV))


I.S. EN 60335-2-77:2006837.

Household and similar electrical appliances - Safety -- Part 2-77: Particular requirementsfor pedestrian controlled mains-operated lawnmowers (IEC 60335-2-77:1996 (MOD))


Date: 18/07/2018

I.S. EN 50414:2006838.

Test methods for analysis of lead in PVC taken from insulation and sheath of electricand optical fibre cables - Method A: Total lead content determination with flameexcitation atomic absorption spectrometry - Method B: Qualitative analysis of lead bylead sulphide staining


I.S. EN 60730-2-2:2002/A1:2006839.

Automatic electrical controls for household and similar use -- Part 2-2: Particularrequirements for thermal motor protectors (IEC 60730-2-2:2001/A1:2005 (MOD))


I.S. EN 61308:2006840.

High-frequency dielectric heating installations - Test methods for the determination ofpower output (IEC 61308:2005 (EQV))


I.S. EN 60730-2-12:2006841.

Automatic electrical controls for household and similar use -- Part 2-12: Particularrequirements for electrically operated door locks (IEC 60730-2-12:2005 (MOD))


I.S. EN 60601-2-27:2006842.

Medical electrical equipment -- Part 2-27: Particular requirements for the safety,including essential performance, of electrocardiographic monitoring equipment (IEC60601-2-27:2005 (EQV))


I.S. EN 50393:2006843.

Test methods and requirements for accessories for use on distribution cables of ratedvoltage 0,6/1,0 (1,2) kV


I.S. EN 60335-2-40:2003/A1:2006844.

Household and similar electrical appliances - Safety -- Part 2-40: Particular requirementsfor electrical heat pumps, air-conditioners and dehumidifiers (IEC 60335-2-40:2002/A1:2005 (MOD))


I.S. HD 60364-7-712:2006845.

Electrical installations of buildings -- Part 7-712: Requirements for special installations orlocations - Solar photovoltaic (PV) power supply systems (IEC 60364-7-712:2002(EQV))


I.S. EN 60335-2-40:2006846.

Household and similar electrical appliances - Safety -- Part 2-40: Particular requirementsfor electrical heat pumps, air-conditioners and dehumidifiers (IEC 60335-2-40:2002(MOD))


I.S. CLC TS 61643-22:2006847.

Low-voltage surge protective devices -- Part 22: Surge protective devices connected totelecommunications and signalling networks - Selection and application principles (IEC61643-22:2004 (MOD))


I.S. EN 60950-22:2006848.

Information technology equipment - Safety -- Part 22: Equipment installed outdoors (IEC60950-22:2005 (MOD))


Date: 18/07/2018

I.S. EN 60950-23:2006849.

Information technology equipment - Safety -- Part 23: Large data storage equipment(IEC 60950-23:2005 (EQV))


I.S. EN 60079-1:2006850.

Electrical apparatus for explosive gas atmospheres -- Part 1: Flameproof enclosures'd' (IEC 60079-1:2003 (EQV))


I.S. EN 60950-1:2006851.

Information technology equipment - Safety -- Part 1: General requirements (IEC 60950-1:2005 (MOD))


I.S. EN 60079-18:2004/AC:2006852.

Electrical apparatus for explosive gas atmospheres -- Part 18: Construction, test andmarking of type of protection encapsulation m electrical apparatus (IEC 60079-18:2004(EQV))


I.S. EN 60079-2:2004/AC:2006853.

Electrical apparatus for explosive gas atmospheres -- Part 2: Pressurized enclosures p(IEC 60079-2:2001 (EQV))


I.S. EN 60079-25:2004/AC:2006854.

Electrical apparatus for explosive gas atmospheres -- Part 25: Intrinsically safe systems(IEC 60079-25:2003 (EQV))


I.S. EN 61280-2-11:2006855.

Fibre optic communication subsystem test procedures -- Part 2-11: Digital systems -Averaged Q-factor determination using amplitude histogram evaluation for optical signalquality monitoring (IEC 61280-2-11:2006 (EQV))


I.S. EN 61280-4-4:2006856.

Fibre optic communication subsystem test procedures -- Part 4-4: Cable plants andlinks - Polarization mode dispersion measurement for installed links (IEC 61280-4-4:2006 (EQV))


I.S. EN ISO 22112:2006857.

Dentistry - Artificial teeth for dental prostheses (ISO 22112:2005)


I.S. EN 13141-8:2006858.

Ventilation for buildings - Performance testing of components/products for residentialventilation - Part 8: Performance testing of un-ducted mechanical supply and exhaustventilation units (including heat recovery) for mechanical ventilation systems intendedfor a single room


I.S. EN 13433:2006859.

Devices to prevent pollution by backflow of potable water - Mechanical disconnector,direct actuated - Family G, type A


Date: 18/07/2018

I.S. EN 13434:2006860.

Devices to prevent pollution by backflow of potable water - Mechanical disconnector,hydraulic actuated - Family G, type B


I.S. EN 14803:2006861.

Identification and/or determination of the quantity of waste


I.S. EN ISO/IEC 15426-2:2006862.

Information technology - Automatic identification and data capture techniques - Bar codeverifier conformance specification - Part 2: Two-dimensional symbols (ISO/IEC 15426-2:2005)


I.S. EN ISO 3071:2006863.

Textiles - Determination of pH of aqueous extract (ISO 3071:2005)


I.S. EN 12691:2006864.

Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roofwaterproofing - Determination of resistance to impact


I.S. EN 14865-2:2006865.

Railway applications - Axlebox lubricating greases - Part 2: Method to test themechanical stability to cover vehicle speeds up to 200 km/h


I.S. EN 12817:2002/A1:2006866.

LPG equipment and accessories - Inspection and requalification of LPG tanks up to andincluding 13 m⁄ overground


I.S. EN 12818:2002/A1:2006867.

LPG equipment and accessories - Inspection and requalification of LPG tanks up to andincluding 13 m⁄ underground


I.S. EN 13952:2003/A1:2006868.

LPG equipment and accessories - Filling procedures for LPG cylinders


I.S. EN ISO 19106:2006869.

Geographic information - Profiles (ISO 19106:2004)


I.S. EN ISO 19125-1:2006870.

Geographic information - Simple feature access - Part 1: Common architecture (ISO19125-1:2004)


I.S. EN ISO 19125-2:2006871.

Geographic information - Simple feature access - Part 2: SQL option (ISO 19125-2:2004)


I.S. EN 215:2004/A1:2006872.

Thermostatic radiator valves - Requirements and test methods


Date: 18/07/2018

I.S. EN ISO 9994:2006873.

Lighters - Safety specification (ISO 9994:2005)


I.S. EN ISO 9445:2006874.

Continuously cold-rolled stainless steel narrow strip, wide strip, plate/sheet and cutlengths - Tolerances on dimensions and form (ISO 9445:2002)


I.S. EN ISO 19116:2006875.

Geographic information - Positioning services (ISO 19116:2004)


I.S. EN ISO 4126-3:2006876.

Safety devices for protection against excessive pressure - Part 3: Safety valves andbursting disc safety devices in combination (ISO 4126-3:2006)


I.S. EN 1333:2006877.

Flanges and their joints - Pipework components - Definition and selection of PN


I.S. EN ISO 16284:2006878.

Ophthalmic optics - Information interchange for ophthalmic optical equipment (ISO16284:2006)


I.S. EN 15136:2006879.

Materials and articles in contact with foodstuffs - Certain epoxy derivatives subject tolimitation - Determination of BADGE, BFDGE and their hydroxy and chlorinatedderivatives in food simulants


I.S. EN ISO 4167:2006880.

Polyolefin agricultural twines (ISO 4167:2006)


I.S. EN ISO 7391-1:2006881.

Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 1: Designationsystem and basis for specifications (ISO 7391-1:2006)


I.S. EN ISO 7391-2:2006882.

Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation oftest specimens and determination of properties (ISO 7391-2:2006)


I.S. EN 13232-7:2006883.

Railway applications - Track - Switches and crossings - Part 7: Crossings with moveable


I.S. EN ISO 16106:2006884.

Packaging - Transport packages for dangerous goods - Dangerous goods packagings,intermediate bulk containers (IBCs) and large packagings - Guidelines for theapplication of ISO 9001 (ISO 16106:2006)


I.S. EN ISO 14814:2006885.

Road transport and traffic telematics - Automatic vehicle and equipment identification -Reference architecture and terminology (ISO 14814:2006)


Date: 18/07/2018

I.S. EN ISO 463:2006886.

Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Designand metrological characteristics of mechanical dial gauges (ISO 463:2006)


I.S. EN ISO 11442:2006887.

Technical product documentation - Document management (ISO 11442:2006)


I.S. CWA 15517:2006888.

European Handbook for Defence Procurement


I.S. EN 46-2:2006889.

Wood preservatives - Determination of the preventive action against Hylotrupes bajulus(Linnaeus) - Part 2: Ovicidal effect (laboratory method)


I.S. EN ISO 16135:2006890.

Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006)


I.S. EN ISO 16138:2006891.

Industrial valves - Diaphragm valves of thermoplastics materials (ISO 16138:2006)


I.S. EN ISO 16136:2006892.

Industrial valves - Butterfly valves of thermoplastics materials (ISO 16136:2006)


I.S. EN ISO 21787:2006893.

Industrial valves - Globe valves of thermoplastics materials (ISO 21787:2006)


I.S. EN ISO 16137:2006894.

Industrial valves - Check valves of thermoplastics materials (ISO 16137:2006)


I.S. EN ISO 16139:2006895.

Industrial valves - Gate valves of thermoplastics materials (ISO 16139:2006)


I.S. EN ISO 15011-4:2006896.

Health and safety in welding and allied processes - Laboratory method for samplingfume and gases - Part 4: Fume data sheets (ISO 15011-4:2006)


I.S. CEN ISO TS 15011-5:2006897.

Health and safety in welding and allied processes - Laboratory method for samplingfume and gases - Part 5: Identification of thermal-degradation products generated whenwelding or cutting through products composed wholly or partly of organic materials(ISO/TS 15011-5:2006)


I.S. EN 287-1:2004/A2:2006898.

Qualification test of welders - Fusion welding - Part 1: Steels


I.S. EN 12517-1:2006899.

Non-destructive testing of welds - Part 1: Evaluation of welded joints in steel, nickel,titanium and their alloys by radiography - Acceptance levels


Date: 18/07/2018

I.S. EN 14900:2006900.

Textile floor coverings - Determination of the density of the textile fleece backing


I.S. CEN TR 15278:2006901.

Workplace exposure - Strategy for the evaluation of dermal exposure


I.S. CEN TS 15279:2006902.

Workplace exposure - Measurement of dermal exposure - Principles and methods


I.S. EN ISO 6860:2006903.

Paints and varnishes - Bend test (conical mandrel) (ISO 6860:2006)


I.S. EN 12417:2001/A1:2006904.

Machine tools - Safety - Machining centres


I.S. EN 13128:2001/A1:2006905.

Safety of machine tools - Milling machines (including boring machines)


I.S. EN ISO 19432:2006906.

Building construction machinery and equipment - Portable, hand-held, internalcombustion engine driven cut-off machines - Safety requirements and testing (ISO19432:2006)


I.S. CEN TR 14788:2006907.

Ventilation for buildings - Design and dimensioning of residential ventilation systems


I.S. CEN ISO TR 18690:2006908.

Guidance for the selection, use and maintenance of safety, protective and occupationalfootwear (ISO/TR 18690:2006)


I.S. EN 12873-3:2006909.

Influence of materials on water intended for human consumption - Influence due tomigration - Part 3: Test method for ion exchange and adsorbent resins


I.S. EN ISO 12625-8:2006910.

Tissue paper and tissue products - Part 8: Water-absorption time and water-absorptioncapacity, basket- immersion test method (ISO 12625-8:2006)


I.S. EN 14951:2006911.

Solid hardwood panelling and cladding - Machined profiles elements


I.S. EN 1309-2:2006912.

Round and sawn timber - Method of measurement of dimensions - Part 2: Round timber- Requirements for measurement and volume calculation rules


I.S. EN 725-8:2006913.

Advanced technical ceramics - Methods of test for ceramic powders - Part 8:Determination of tapped bulk density


Date: 18/07/2018

I.S. EN 725-9:2006914.

Advanced technical ceramics - Methods of test for ceramic powders - Part 9:Determination of un-tapped bulk density


I.S. CEN TS 15365:2006915.

Advanced technical ceramics - Mechanical properties of ceramic fibres at hightemperature in a non-reactive environment - Determination of creep behaviour by thecold end method


I.S. EN 12101-1:2005/A1:2006916.

Smoke and heat control systems - Part 1: Specification for smoke barriers


I.S. EN 12875-5:2006917.

Mechanical dishwashing resistance of utensils - Part 5: Rapid test for ceramic cateringarticles


I.S. EN 15137:2006918.

Materials and articles in contact with foodstuffs - Certain epoxy derivatives subject tolimitation - Determination of NOGE and its hydroxy and chlorinated derivatives


I.S. CEN TR 15356-1:2006919.

Validation and interpretation of analytical methods, migration testing and analytical datafor materials and articles in contact with food - Part 1: General considerations


I.S. EN 1010-2:2006920.

Safety of machinery - Safety requirements for the design and construction of printingand paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery


I.S. CEN TS 15280:2006921.

Evaluation of a.c. corrosion likelihood of buried pipelines - Application to cathodicallyprotected pipelines


I.S. CEN TS 15360:2006922.

Fertilizers - Determination of dicyandiamide - Method using highperformance liquidchromatography (HPLC)


I.S. EN 1948-1:2006923.

Stationary source emissions - Determination of the mass concentration ofPCDDs/PCDFs and dioxin-like PCBs - Part 1: Sampling of PCDDs/PCDFs


I.S. EN 1948-2:2006924.

Stationary source emissions - Determination of the mass concentration ofPCDDs/PCDFs and dioxin-like PCBs - Part 2: Extraction and clean-up ofPCDDs/PCDFs


I.S. EN 1948-3:2006925.

Stationary source emissions - Determination of the mass concentration ofPCDDs/PCDFs and dioxin-like PCBs - Part 3: Identification and quantification ofPCDDs/PCDFs


Date: 18/07/2018

I.S. EN 12896:2006926.

Road transport and traffic telematics - Public transport - Reference data model


I.S. CEN TR 15175:2006927.

Characterization of sludges - Protocol for organizing and conducting inter-laboratorytests of methods for chemical and microbiological analysis of sludges


I.S. CEN TS 15234:2006928.

Solid biofuels - Fuel quality assurance


I.S. CEN TS 15290:2006929.

Solid Biofuels - Determination of major elements


I.S. CEN TS 15297:2006930.

Solid Biofuels - Determination of minor elements


I.S. CEN TS 15296:2006931.

Solid Biofuels - Calculation of analyses to different bases


I.S. EN ISO 10087:2006932.

Small craft - Craft identification - Coding system (ISO 10087:2006)


I.S. EN 12875-4:2006933.

Mechanical dishwashing resistance of utensils - Part 4: Rapid test for domestic ceramicarticles


I.S. EN 15086:2006934.

Foodstuffs - Determination of isomalt, lactitol, maltitol, mannitol, sorbitol and xylitol infoodstuffs


I.S. EN 14351-1:2006935.

Windows and doors - Product standard, performance characteristics - Part 1: Windowsand external pedestrian doorsets without resistance to fire and/or smoke leakagecharacteristics


I.S. CEN TR 15226:2006936.

Building products - Treatment of acoustics in product technical specifications


I.S. EN 1507:2006937.

Ventilation for buildings - Sheet metal air ducts with rectangular section - Requirementsfor strength and leakage


I.S. EN 14516:2006938.

Baths for domestic purposes


I.S. EN 12873-4:2006939.

Influence of materials on water intended for human consumption - Influence due tomigration - Part 4: Test method for water treatment membranes


Date: 18/07/2018

I.S. EN 15028:2006940.

Chemicals used for treatment of water intended for human consumption - Sodiumchlorate


I.S. EN 15029:2006941.

Products used for treatment of water intended for human consumption - Iron (III)hydroxide oxide


I.S. EN 15030:2006942.

Chemicals used for treatment of water intended for human consumption - Silver salts forintermittent use


I.S. EN 1332-5:2006943.

Identification card systems - Man-machine interface - Part 5: Raised tactile symbols fordifferenciation of application on ID-1 cards


I.S. EN 13369:2004/A1:2006944.

Common rules for precast concrete products


I.S. CEN TS 15260:2006945.

Health informatics - Classification of safety risks from health informatics products


I.S. EN 12920:2006946.

Characterization of waste - Methodology for the Determination of the LeachingBehaviour of Waste under Specified Conditions


I.S. EN 14491:2006947.

Dust explosion venting protective systems


I.S. EN 14701-1:2006948.

Characterisation of sludges - Filtration properties - Part 1: Capillary suction time (CST)


I.S. EN 14702-1:2006949.

Characterisation of sludges - Settling properties - Part 1: Determination of settleability(Determination of the proportion of sludge volume and sludge volume index)


I.S. EN 14702-2:2006950.

Characterisation of sludges - Settling properties - Part 2: Determination of thickenability


I.S. EN 12975-1:2006951.

Thermal solar systems and components - Solar collectors - Part 1: GeneralRequirements


I.S. EN 12975-2:2006952.

Thermal solar systems and components - Solar collectors - Part 2: Test methods


I.S. EN 14988-1:2006953.

Children's high chairs - Part 1: Safety requirements


Date: 18/07/2018

I.S. EN 14988-2:2006954.

Children's high chairs - Part 2: Test methods


I.S. CWA 15526:2006955.

European Network for Administrative Nomenclature


I.S. EN 61326-2-6:2006956.

Electrical equipment for measurement, control and laboratory use - EMC requirements --Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment (IEC61326-2-6:2005 (EQV))

2 JUNE 2006Date published

I.S. EN 61326-2-2:2006957.

Electrical equipment for measurement, control and laboratory use - EMC requirements --Part 2-2: Particular requirements - Test configurations, operational conditions andperformance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems (IEC 61326-2-2:2005 (EQV))


I.S. EN 61326-2-1:2006958.

Electrical equipment for measurement, control and laboratory use - EMC requirements --Part 2-1: Particular requirements - Test configurations, operational conditions andperformance criteria for sensitive test and measurement equipment for EMCunprotected applications (IEC 61326-2-1:2005 (EQV))


I.S. EN 61326-1:2006959.

Electrical equipment for measurement, control and laboratory use - EMC requirements --Part 1: General requirements (IEC 61326-1:2005 (EQV))


I.S. EN 61925:2006960.

Multimedia systems and equipment - Multimedia home server systems - Vocabulary ofhome server (IEC 61925:2005 (EQV))


I.S. EN 61754-13:2006961.

Fibre optic connector interfaces -- Part 13: Type FC-PC connector (IEC 61754-13:2006(EQV))


I.S. EN 50341-3:2001/AC:2009962.

Overhead electrical lines exceeding AC 45 kV -- Part 3: Set of National NormativeAspects


I.S. EN 50367:2006963.

Railway applications - Current collection systems - Technical criteria for the interactionbetween pantograph and overhead line (to achieve free access)


I.S. CLC TS 50458:2006964.

Capacitance graded outdoor bushing 52 kV up to 420 kV for oil immersed transformers


I.S. EN 50366:2003/A1:2006965.

Household and similar electrical appliances - Electromagnetic fields - Methods forevaluation and measurement


Date: 18/07/2018

I.S. EN 60335-2-54:2003/A11:2006966.

Household and similar electrical appliances - Safety -- Part 2-54: Particular requirementsfor surface-cleaning appliances for household use employing liquids or steam


I.S. EN 60454-3-12:2006967.

Pressure-sensitive adhesive tapes for electrical purposes -- Part 3: Specifications forindividual materials -- Sheet 12: Requirements for polyethylene and polypropylene filmtapes with pressure sensitive adhesive (IEC 60454-3-12:2006 (EQV))


I.S. EN 60454-3-2:2006968.

Pressure-sensitive adhesive tapes for electrical purposes -- Part 3: Specifications forindividual materials -- Sheet 2: Requirements for polyester film tapes with rubberthermosetting, rubber thermoplastic or acrylic crosslinked adhesives (IEC 60454-3-2:2006 (EQV))


I.S. EN 50342-1:2006969.

Lead-acid starter batteries -- Part 1: General requirements and methods of test


I.S. EN 60079-27:2006970.

Electrical apparatus for explosive gas atmospheres -- Part 27: Fieldbus intrinsically safeconcept (FISCO) and Fieldbus non-incendive concept (FNICO) (IEC 60079-27:2005(EQV))


I.S. EN 61000-3-2:2006971.

Electromagnetic compatibility (EMC) -- Part 3-2: Limits - Limits for harmonic currentemissions (equipment input current ≤ 16 A per phase) (IEC 61000-3-2:2005 (EQV))


I.S. EN 60455-3-5:2006972.

Resin based reactive compounds used for electrical insulation -- Part 3: Specificationsfor individual materials -- Sheet 5: Unsaturated polyester based impregnating resins(IEC 60455-3-5:2006 (EQV))


I.S. CLC/TR 62102:2006973.

Electrical safety - Classification of interfaces for equipment to be connected toinformation and communications technology networks (IEC/TR 62102:2005 (EQV))


I.S. HD 60364-5-51:2006974.

Electrical installations of buildings -- Part 5-51: Selection and erection of electricalequipment - Common rules (IEC 60364-5-51:2001 (MOD))


S.R. CLC/TR 50126-3:2006975.

Railway applications - The specification and demonstration of Reliability, Availability,Maintainability and Safety (RAMS) -- Part 3: Guide to the application of EN 50126-1 forrolling stock RAMS


I.S. EN 50200:2006976.

Method of test for resistance to fire of unprotected small cables for use in emergencycircuits


Date: 18/07/2018

I.S. EN 62132-4:2006977.

Integrated circuits - Measurement of electromagnetic immunity 150 kHz to 1 GHz -- Part4: Direct RF power injection method (IEC 62132-4:2006 (EQV))


I.S. EN 60335-2-79:2004/A1:2006978.

Household and similar electrical appliances - Safety -- Part 2-79: Particular requirementsfor high pressure cleaners and steam cleaners (IEC 60335-2-79:2002/A1:2004 (EQV))


I.S. EN 60352-2:2006979.

Solderless connections -- Part 2: Crimped connections - General requirements, testmethods and practical guidance (IEC 60352-2:2006 (EQV))


I.S. EN 61000-4-3:2006980.

Electromagnetic compatibility (EMC) -- Part 4-3: Testing and measurement techniques -Radiated, radio-frequency, electromagnetic field immunity test (IEC 61000-4-3:2006(EQV))


I.S. EN 60335-2-90:2006981.

Household and similar electrical appliances - Safety -- Part 2-90: Particular requirementsfor commercial microwave ovens (IEC 60335-2-90:2006 (EQV))


I.S. EN 60745-2-6:2003/A1:2006982.

Hand-held motor-operated electric tools - Safety -- Part 2-6: Particular requirements forhammers (IEC 60745-2-6:2003/A1:2006 (EQV))


I.S. EN 61078:2006983.

Analysis techniques for dependability - Reliability block diagram and boolean methods(IEC 61078:2006 (EQV))


I.S. EN 60335-2-73:2003/A1:2006984.

Household and similar electrical appliances - Safety -- Part 2-73: Particular requirementsfor fixed immersion heaters (IEC 60335-2-73:2002/A1:2006 (EQV))


I.S. EN 60512-12-1:2006985.

Connectors for electronic equipment - Tests and measurements -- Part 12-1: Solderingtests - Test 12a: Solderability, wetting, solder bath method (IEC 60512-12-1:2006(EQV))


I.S. EN 60512-1-100:2006986.

Connectors for electronic equipment - Tests and measurements -- Part 1-100: General -Applicable publications (IEC 60512-1-100:2006 (EQV))


I.S. EN 60812:2006987.

Analysis techniques for system reliability - Procedure for failure mode and effectsanalysis (FMEA) (IEC 60812:2006 (EQV))


I.S. EN 60335-2-17:2002/A1:2006988.

Household and similar electrical appliances - Safety -- Part 2-17: Particular requirementsfor blankets, pads and similar flexible heating appliances (IEC 60335-2-17:2002/A1:2006 (EQV))


Date: 18/07/2018

I.S. EN 61970-1:2006989.

Energy management system application program interface (EMS-API) -- Part 1:Guidelines and general requirements (IEC 61970-1:2005 (EQV))


I.S. EN 60794-3-21:2006990.

Optical fibre cables -- Part 3-21: Outdoor cables - Detailed specification for optical self-supporting aerial telecommunication cables for use in premises cabling (IEC 60794-3-21:2005 (EQV))


I.S. EN 60794-3-12:2006991.

Optical fibre cables -- Part 3-12: Outdoor cables - Detailed specification for duct anddirectly buried optical telecommunication cables for use in premises cabling (IEC 60794-3-12:2005 (EQV))


I.S. EN 60064:1996/A3:2006992.

Tungsten filament lamps for domestic and similar general lighting purposes -Performance requirements (IEC 60064:1993/A3:2005 (MOD))


I.S. EN 50411-2-4:2006993.

Fibre organisers and closures to be used in optical fibre communication systems -Product specifications -- Part 2-4: Sealed dome fibre splice closures Type 1, forcategory S & A


I.S. EN 60422:2006994.

Mineral insulating oils in electrical equipment - Supervision and maintenance guidance(IEC 60422:2005 (EQV))


I.S. CLC TS 50466:2006995.

Long duration storage of electronic components - Specification for implementation


I.S. EN 60071-1:2006996.

Insulation co-ordination -- Part 1: Definitions, principles and rules (IEC 60071-1:2006(EQV))


I.S. EN ISO 16708:2006997.

Petroleum and natural gas industries - Pipeline transportation systems - Reliability-based limit state methods (ISO 16708:2006)


I.S. EN ISO 6877:2006998.

Dentistry - Root-canal obturating points (ISO 6877:2006)


I.S. EN ISO 15614-6:2006999.

Specification and qualification of welding procedures for metallic materials - Weldingprocedure test - Part 6: Arc and gas welding of copper and its alloys (ISO 15614-6:2006)


I.S. EN ISO 5172:20061000.

Gas welding equipment - Blowpipes for gas welding, heating and cutting - Specificationsand tests (ISO 5172:2006)


Date: 18/07/2018

I.S. EN ISO 17634:20061001.

Welding consumables - Tubular cored electrodes for gas shielded metal arc welding ofcreep-resisting steels - Classification (ISO 17634:2004)


I.S. EN ISO 17633:20061002.

Welding consumables - Tubular cored electrodes and rods for gas shielded and non-gasshielded metal arc welding of stainless and heat-resisting steels - Classification (ISO17633:2004)


I.S. EN ISO 11064-7:20061003.

Ergonomic design of control centres - Part 7: Principles for the evaluation of controlcentres (ISO 11064-7:2006)


I.S. EN ISO 10848-2:20061004.

Acoustics - Laboratory measurement of the flanking transmission of airborne and impactsound between adjoining rooms - Part 2: Application to light elements when the junctionhas a small influence (ISO 10848-2:2006)


I.S. EN ISO 10848-3:20061005.

Acoustics - Laboratory measurement of the flanking transmission of airborne and impactsound between adjoining rooms - Part 3: Application to light elements when the junctionhas a substantial influence (ISO 10848-3:2006)


I.S. EN ISO 10848-1:20061006.

Acoustics - Laboratory measurement of the flanking transmission of airborne and impactsound between adjoining rooms - Part 1: Frame document (ISO 10848-1:2006)


I.S. EN ISO 8502-11:20061007.

Preparation of steel substrates before application of paints and related products - Testsfor the assessment of surface cleanliness - Part 11: Field method for the turbidimetricdetermination of water-soluble sulfate (ISO 8502-11:2006)


I.S. EN ISO 7784-1:20061008.

Paints and varnishes - Determination of resistance to abrasion - Part 1: Rotatingabrasive-paper-covered wheel method (ISO 7784-1:1997)


I.S. EN ISO 7784-2:20061009.

Paints and varnishes - Determination of resistance to abrasion - Part 2: Rotatingabrasive rubber wheel method (ISO 7784-2:1997)


I.S. EN ISO 7784-3:20061010.

Paints and varnishes - Determination of resistance to abrasion - Part 3: Reciprocatingtest panel method (ISO 7784-3:2000)


I.S. EN 14364:20061011.

Plastics piping systems for drainage and sewerage with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) -Specifications for pipes, fittings and joints


Date: 18/07/2018

I.S. EN 14944-1:20061012.

Influence of cementitious products on water intended for human consumption - Testmethods - Part 1: Influence of factory made cementitious products on organolepticparameters


I.S. EN ISO 11737-1:20061013.

Sterilization of medical devices - Microbiological methods - Part 1: Determination of apopulation of microorganisms on products (ISO 11737-1:2006)


I.S. EN ISO 17201-4:20061014.

Acoustics - Noise from shooting ranges - Part 4: Prediction of projectile sound (ISO17201-4:2006)


I.S. EN ISO 4589-2:1999/A1:20061015.

Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:1996/Amd 1:2005)


I.S. EN ISO 14910-1:20061016.

Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for mouldingand extrusion - Part 1: Designation system and basis for specifications (ISO 14910-1:1997)


I.S. EN ISO 14910-2:20061017.

Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for mouldingand extrusion - Part 2: Preparation of test specimens and determination of properties(ISO 14910-2:1997)


I.S. EN ISO 8257-1:20061018.

Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 1:Designation system and basis for specifications (ISO 8257-1:1998)


I.S. EN ISO 8257-2:20061019.

Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 2:Preparation of test specimens and determination of properties (ISO 8257-2:2001)


I.S. EN ISO 9988-1:20061020.

Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 1:Designation system and basis for specifications (ISO 9988-1:2004)


I.S. EN ISO 14663-1:20061021.

Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials -Part 1: Designation system and basis for specifications (ISO 14663-1:1999)


I.S. EN ISO 14663-2:20061022.

Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials -Part 2: Preparation of test specimens and determination of properties (ISO 14663-2:1999)


Date: 18/07/2018

I.S. EN ISO 15023-1:20061023.

Plastics - Poly(vinyl alcohol) (PVAL) materials - Part 1: Designation system and basis forspecifications (ISO 15023-1:2001)


I.S. EN ISO 15023-2:20061024.

Plastics - Poly(vinyl alcohol) (PVAL) materials - Part 2: Determination of properties (ISO15023-2:2003)


I.S. EN ISO 11833-2:20061025.

Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions andcharacteristics - Part 2: Sheets of thickness less than 1 mm (ISO 11833-2:1998)


I.S. EN ISO 13802:20061026.

Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensileimpact-testing (ISO 13802:1999, including Corrigendum 1:2000)


I.S. EN ISO 13468-2:20061027.

Plastics - Determination of the total luminous transmittance of transparent materials -Part 2: Double-beam instrument (ISO 13468-2:1999)


I.S. EN 15380-1:20061028.

Railway applications - Designation system for railway vehicles - Part 1: Generalprinciples


I.S. EN 15380-2:20061029.

Railway applications - Designation system for railway vehicles - Part 2: Product groups


I.S. EN 15380-3:20061030.

Railway applications - Designation system for railway vehicles - Part 3: Designation ofinstallation sites and locations


I.S. EN ISO 16000-1:20061031.

Indoor air - Part 1: General aspects of sampling strategy (ISO 16000-1:2004)


I.S. EN ISO 16000-2:20061032.

Indoor air - Part 2: Sampling strategy for formaldehyde (ISO 16000-2:2004)


I.S. EN ISO 3738-2:20061033.

Hardmetals - Rockwell hardness test (scale A) - Part 2: Preparation and calibration ofstandard test blocks (ISO 3738-2:1988)


I.S. EN ISO 3928:20061034.

Sintered metal materials, excluding hardmetals - Fatigue test pieces (ISO 3928:1999)


I.S. EN ISO 4022:20061035.

Permeable sintered metal materials - Determination of fluid permeability (ISO4022:1987)


Date: 18/07/2018

I.S. EN ISO 4491-3:20061036.

Metallic powders - Determination of oxygen content by reduction methods - Part 3:Hydrogen-reducible oxygen (ISO 4491-3:1997)


I.S. EN ISO 13944:20061037.

Lubricated metal-powder mixes - Determination of lubricant content - Modified Soxhletextraction method (ISO 13944:1996)


I.S. EN ISO 9241-110:20061038.

Ergonomics of human-system interaction - Part 110: Dialogue principles (ISO 9241-110:2006)


I.S. CEN TR 15367:20061039.

Petroleum products - Automotive diesel fuels - Guide for good housekeeping


I.S. CEN TR 15177:20061040.

Testing the freeze-thaw resistance of concrete - Internal structural damage


I.S. EN 14488-5:20061041.

Testing sprayed concrete - Part 5: Determination of energy absorption capacity of fibrereinforced slab specimens


I.S. EN 14488-7:20061042.

Testing sprayed concrete - Part 7: Fibre content of fibre reinforced concrete


I.S. EN 623-1:20061043.

Advanced technical ceramics - Monolithic ceramics - General and textural properties -Part 1: Determination of the presence of defects by dye penetration


I.S. EN 14810:20061044.

Surfaces for sports areas - Determination of spike resistance


I.S. EN 14904:20061045.

Surfaces for sports areas - Indoor surfaces for multi-sports use - Specification


I.S. EN 13481-8:20061046.

Railway applications - Track - Performance requirements for fastening systems - Part 8:Fastening systems for track with heavy axle loads


I.S. EN 15042-1:20061047.

Thickness measurement of coatings and characterization of surfaces with surfacewaves - Part 1: Guide to the determination of elastic constants, density and thickness offilms by laserinduced surface acoustic waves


I.S. EN 15042-2:20061048.

Thickness measurement of coatings and characterization of surfaces with surfacewaves - Part 2: Guide to the thickness measurement of coatings by photothermicmethod


Date: 18/07/2018

I.S. EN ISO 20837:20061049.

Microbiology of food and animal feeding stuffs - Polymerase chain reaction (PCR) forthe detection of food-borne pathogens - Requirements for sample preparation forqualitative detection(ISO 20837:2006)


I.S. EN ISO 20838:20061050.

Microbiology of food and animal feeding stuffs - Polymerase chain reaction (PCR) forthe detection of food-borne pathogens - Requirements for amplification and detection forqualitative methods (ISO 20838:2006)


I.S. EN ISO 14819-6:20061051.

Traffic and Traveller Information (TTI) - TTI messages via traffic message coding - Part6: Encryption and conditional access for the Radio Data System - Traffic MessageChannel ALERT C coding (ISO 14819-6:2006)


I.S. CEN TS 15364:20061052.

Characterization of waste - Leaching behaviour tests - Acid and base neutralizationcapacity test


I.S. EN ISO 16472:20061053.

Animal feeding stuffs - Determination of amylase-treated neutral detergent fibre content(aNDF) (ISO 16472:2006)


I.S. CEN TS 15130:20061054.

Postal services - DPM infrastructure - Messages supporting DPM applications


I.S. CEN TR 14709:20061055.

Postal services - Quality of service - Guide for the implementation of EN 13850


I.S. CEN TS 15289:20061056.

Solid Biofuels - Determination of total content of sulphur and chlorine


I.S. EN 3155-005:20061057.

Aerospace series - Electrical contacts used in elements of connection - Part 005:Contacts, electrical, female, type A, crimp, class T - Product standard


I.S. EN 3155-023:20061058.

Aerospace series - Electrical contacts used in elements of connection - Part 023:Contacts, electrical rectangular, female, type A, crimp, class R - Product standard


I.S. EN 3155-026:20061059.

Aerospace series - Electrical contacts used in elements of connection - Part 026:Contacts, electrical, male, type A, crimp, class R - Product standard


I.S. EN 3155-027:20061060.

Aerospace series - Electrical contacts used in elements of connection - Part 027:Contacts, electrical, female, type A, crimp, class R - Product standard


Date: 18/07/2018

I.S. EN 3155-042:20061061.

Aerospace series - Electrical contacts used in elements of connection - Part 042:Contacts, electrical, triaxial, size 08, male 042, type D, solder, class P - Productstandard


I.S. EN 3155-043:20061062.

Aerospace series - Electrical contacts used in elements of connection - Part 043:Contacts, electrical, triaxial, size 08, female 043, type D, solder, class P - Productstandard


I.S. EN 4172:20061063.

Aerospace series - Lockbolts, protruding head, sheartype, close tolerance, in titaniumalloy TI-P64001, anodized, metric series - Classification: 1 100 MPa (at ambienttemperature) / 315 °C


I.S. EN 4173:20061064.

Aerospace series - Lockbolts, 100 countersunk normal head, sheartype, close tolerance,in titanium alloy TI-P64001, anodized, metric series - Classification: 1 100 MPa (atambient temperature) / 315 °C


I.S. EN 4174:20061065.

Aerospace series - Collars, swage locking, sheartype, in aluminium alloy 2024, anodizedor chromated, metric series


I.S. CEN TR 10347:20061066.

Guidance for forming of structural steels in processing


I.S. EN ISO 10253:20061067.

Water quality - Marine algal growth inhibition test with Skeletonema costatum andPhaeodactylum tricornutum (ISO 10253:2006)


I.S. EN 14909:20061068.

Flexible sheets for waterproofing - Plastic and rubber damp proof courses - Definitionsand characteristics


I.S. EN 13445-3:2002/A8:20061069.



I.S. EN ISO 15883-2:20061070.

Washer-disinfectors - Part 2: Requirements and tests for washer-disinfectors employingthermal disinfection for surgical instruments, anaesthetic equipment, bowls, dishes,receivers,utensils, glassware, etc. (ISO 15883-2:2006)


I.S. EN ISO 15883-3:20061071.

Washer-disinfectors - Part 3: Requirements and tests for washer-disinfectors employingthermal disinfection for human waste containers (ISO 15883-3:2006)


Date: 18/07/2018

I.S. EN ISO 11607-1:20061072.

Packaging for terminally sterilized medical devices - Part 1: Requirements for materials,sterile barrier systems and packaging systems (ISO 11607-1:2006)


I.S. EN ISO 11607-2:20061073.

Packaging for terminally sterilized medical devices - Part 2: Validation requirements forforming, sealing and assembly processes (ISO 11607-2:2006)


I.S. EN ISO 15883-1:20061074.

Washer-disinfectors - Part 1: General requirements, terms and definitions and tests (ISO15883-1:2006)


I.S. EN 14488-3:20061075.

Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual)of fibre reinforced beam specimens


I.S. EN 806-3:20061076.

Specifications for installations inside buildings conveying water for human consumption -Part 3: Pipe sizing - Simplified method


I.S. EN 1151-2:20061077.

Pumps - Rotodynamic pumps - Circulation pumps having a rated power input notexceeding 200 W for heating installations and domestic hot water installations - Part 2:Noise test code (vibroacoustics)for measuring structure- and fluid-borne noise


I.S. EN 1151-1:20061078.

Pumps - Rotodynamic pumps - Circulation pumps having a rated power input notexceeding 200 W for heating installations and domestic hot water installations - Part 1:Non-automatic circulation pumps, requirements, testing, marking


I.S. EN 14817:20061079.

Railway applications - Suspension components - Air spring control elements


I.S. EN 13674-2:20061080.

Railway applications - Track - Rail - Part 2: Switch and crossing rails used in conjunctionwith Vignole railway rails 46 kg/m and above


I.S. EN 13674-3:20061081.

Railway applications - Track - Rail - Part 3: Check rails


I.S. EN 13674-4:20061082.

Railway applications - Track - Rail - Part 4: Vignole railway rails from 27 kg/m to, butexcluding 46 kg/m


I.S. EN 14984:20061083.

Liming materials - Determination of product effect on soil pH - Soil incubation method


Date: 18/07/2018

I.S. CEN ISO TS 24530-1:20061084.

Traffic and Travel Information (TTI) - TTI via Transport Protocol Experts Group (TPEG)Extensible Markup Language (XML) - Part 1: Introduction, common data types andtpegML (ISO/TS24530-1:2006)


I.S. CEN ISO TS 24530-2:20061085.

Traffic and Travel Information (TTI) - TTI via Transport Protocol Experts Group (TPEG)Extensible Markup Language (XML) - Part 2: tpeg-locML (ISO/TS 24530-2:2006)


I.S. CEN ISO TS 24530-3:20061086.

Traffic and Travel Information (TTI) - TTI via Transport Protocol Experts Group (TPEG)Extensible Markup Language (XML) - Part 3: tpeg-rtmML (ISO/TS 24530-3:2006)


I.S. CEN ISO TS 24530-4:20061087.

Traffic and Travel Information (TTI) - TTI via Transport Protocol Experts Group (TPEG)Extensible Markup Language (XML) - Part 4: tpeg-ptiML (ISO/TS 24530-4:2006)


I.S. EN ISO 11816-1:20061088.

Milk and milk products - Determination of alkaline phosphatase activity - Part 1:Fluorimetric method for milk and milk-based drinks (ISO 11816-1:2006)


I.S. EN ISO 9936:20061089.

Animal and vegetable fats and oils - Determination of tocopherol and tocotrienolcontents by high-performance liquid chromatography (ISO 9936:2006)


I.S. EN ISO 19439:20061090.

Enterprise integration - Framework for enterprise modelling (ISO 19439:2006)


I.S. EN 1854:20061091.

Pressure sensing devices for gas burners and gas burning appliances


I.S. EN 614-1:20061092.

Safety of machinery - Ergonomic design principles - Part 1: Terminology and generalprinciples


I.S. EN 15051:20061093.

Workplace atmospheres - Measurement of the dustiness of bulk materials -Requirements and reference test methods


I.S. EN 584-1:20061094.

Non-destructive testing - Industrial radiographic film - Part 1: Classification of filmsystems for industrial radiography


I.S. EN 927-2:20061095.

Paints and varnishes - Coating materials and coating systems for exterior wood - Part 2:Performance specification


Date: 18/07/2018

I.S. EN 12525:2000/A1:20061096.

Agricultural machinery - Front loaders - Safety


I.S. EN 12999:2002/A2:20061097.

Cranes - Loader cranes


I.S. EN 511:20061098.

Protective gloves against cold


I.S. EN 14786:20061099.

Protective clothing - Determination of resistance to penetration by sprayed liquidchemicals, emulsions and dispersions - Atomizer test


I.S. EN 646:20061100.

Paper and board intended to come into contact with foodstuffs - Determination of colourfastness of dyed paper and board


I.S. EN 725-4:20061101.

Advanced technical ceramics - Methods of test for ceramic powders - Part 4:Determination of oxygen content in aluminium nitride by XRF analysis


I.S. EN 12094-8:20061102.

Fixed firefighting systems - Components for gas extinguishing systems - Part 8:Requirements and test methods for connectors


I.S. EN 12094-5:20061103.

Fixed firefighting systems - Components for gas extinguishing systems - Part 5:Requirements and test methods for high and low pressure selector valves and theiractuators


I.S. EN 12094-6:20061104.

Fixed firefighting systems - Components for gas extinguishing systems - Part 6:Requirements and test methods for nonelectrical disable devices


I.S. EN 1804-3:20061105.

Machines for underground mines - Safety requirements for hydraulic powered roofsupports - Part 3: Hydraulic control systems


I.S. EN ISO 11137-1:20061106.

Sterilization of health care products - Radiation - Part 1: Requirements for development,validation and routine control of a sterilization process for medical devices (ISO 11137-1:2006)


I.S. EN ISO 11137-3:20061107.

Sterilization of health care products - Radiation - Part 3: Guidance on dosimetric aspects(ISO 11137-3:2006)


Date: 18/07/2018

I.S. EN ISO 10524-2:20061108.

Pressure regulators for use with medical gases - Part 2: Manifold and line pressureregulators (ISO 10524-2:2005)


I.S. EN ISO 10524-3:20061109.

Pressure regulators for use with medical gases - Part 3: Pressure regulators integratedwith cylinder valves (ISO 10524-3:2005)


I.S. EN 14877:20061110.

Synthetic surfaces for outdoor sports areas - Specification


I.S. EN 12368:20061111.

Traffic control equipment - Signal heads


I.S. EN 12352:20061112.

Traffic control equipment - Warning and safety light devices


I.S. EN 14962:20061113.

Water quality - Guidance on the scope and selection of fish sampling methods


I.S. EN 12079-1:20061114.

Offshore containers and associated lifting sets - Part 1: Offshore container - Design,manufacture and marking


I.S. EN 12079-2:20061115.

Offshore containers and associated lifting sets - Part 2: Lifting sets - Design,manufacture and marking


I.S. EN 12079-3:20061116.

Offshore containers and associated lifting sets - Part 3: Periodic inspection, examinationand testing


I.S. EN 14432:20061117.

Tanks for the transport of dangerous goods - Tank equipment for the transport of liquidchemicals - Product discharge and air inlet valves


I.S. EN 14433:20061118.

Tanks for the transport of dangerous goods - Tank equipment for the transport of liquidchemicals - Foot valves


I.S. EN 15140:20061119.

Public passenger transport - Basic requirements and recommendations for systems thatmeasure delivered service quality


I.S. EN 2754:20061120.

Aerospace series - Nuts, anchor, self locking, two lug, floating with counterbore -Classification: 1 100 MPa/235 °C


Date: 18/07/2018

I.S. EN 3218-001:20061121.

Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part001: Technical specification


I.S. EN 3218-002:20061122.

Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part002: Specification of performance and contact arrangements


I.S. EN 3218-005:20061123.

Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part005: Plug with non-removable size 22 solder contacts - Product standard


I.S. EN 3218-006:20061124.

Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part006: Receptacle with non-removable size 22 solder contacts - Product standard


I.S. EN 3218-007:20061125.

Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part007: Plug with rear-removable size 20 crimp contacts - Product standard


I.S. EN 3218-008:20061126.

Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part008: Receptacle with rear-removable size 20 crimp contacts - Product standard


I.S. EN 3709:20061127.

Aerospace series - Wrenches and sockets, bi-hexagonal - Technical specification


I.S. EN 3475-203:20061128.

Aerospace series - Cables, electrical, aircraft use - Test methods - Part 203: Dimensions


I.S. EN 9102:20061129.

Aerospace series - Quality systems - First article inspection


I.S. EN 9104:20061130.

Aerospace series - Quality management systems - Requirements for Aerospace QualityManagement System Certification/Registrations Programs


I.S. EN 9132:20061131.

Aerospace series - Quality management systems - Data Matrix Quality Requirements forParts Marking


I.S. EN 3218-009:20061132.

Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part009: Protective covers for EN 3218-005 and EN 3218-007 connectors - Productstandard


Date: 18/07/2018

I.S. EN 3218-010:20061133.

Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part010: Protective covers for EN 3218-006 and EN 3218-008 connectors - Productstandard


I.S. EN 3218-011:20061134.

Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part011: Tool, insert extraction for EN 3218-005 to EN 3218-008 connectors - Productstandard


I.S. EN 10210-1:20061135.

Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1:Technical delivery conditions


I.S. EN 10210-2:20061136.

Hot finished structural hollow sections of non-alloy and fine grain steels - Part 2:Tolerances, dimensions and sectional properties


I.S. EN 10219-1:20061137.

Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1:Technical delivery conditions


I.S. EN 10219-2:20061138.

Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2:Tolerances, dimensions and sectional properties


I.S. EN 10269:1999/A1:20061139.

Steels and nickel alloys for fasteners with specified elevated and/or low temperatureproperties


I.S. EN 10169-2:20061140.

Continuously organic coated (coil coated) steel flat products - Part 2: Products forbuilding exterior applications


I.S. CWA 15533:20061141.

A model for the classification of quality approaches in eLearning


I.S. CWA 15535-1:20061142.

Multi-application multi-issuer citizen card scheme standardisation - Part 1: Businessmodel agreement


I.S. CWA 15535-2:20061143.

Multi-application multi-issuer citizen card scheme standardisation - Part 2: Schemearchitecture and implementation solution


I.S. CWA 15537:20061144.

Network Enabled Abilities - Service-Oriented Architecture for civilian and military crisismanagement


Date: 18/07/2018

I.S. EN 62115:20061145.

Electric toys - Safety (IEC 62115:2003 (MOD) + A1:2004 (EQV))


I.S. EN 61966-6:20061146.

Multimedia systems and equipment - Colour measurement and management -- Part 6:Front projection displays (IEC 61966-6:2005 (EQV))


I.S. EN 61591:1998/A1:20061147.

Household range hoods - Methods for measuring performance (IEC61591:1997/A1:2005 (EQV))


I.S. EN 61582:20061148.

Radiation protection instrumentation - In vivo counters - Classification, generalrequirements and test procedures for portable, transportable and installed equipment(IEC 61582:2004 (MOD))


I.S. EN 61307:20061149.

Industrial microwave heating installations - Test methods for the determination of poweroutput (IEC 61307:2006 (EQV))


I.S. EN 61212-3-1:20061150.

Insulating materials - Industrial rigid round laminated tubes and rods based onthermosetting resins for electrical purposes -- Part 3: Specifications for individualmaterials -- Sheet 1: Round laminated rolled tubes (IEC 61212-3-1:2006 (EQV))


I.S. EN 61212-1:20061151.

Insulating materials - Industrial rigid round laminated tubes and rods based onthermosetting resins for electrical purposes -- Part 1: Definitions, designations andgeneral requirements (IEC 61212-1:2006 (EQV))


I.S. EN 60793-2-40:20061152.

Optical fibres -- Part 2-40: Product specifications - Sectional specification for categoryA4 multimode fibres (IEC 60793-2-40:2006 (EQV))


I.S. EN 60793-1-34:20061153.

Optical fibres -- Part 1-34: Measurement methods and test procedures - Fibre curl (IEC60793-1-34:2006 (EQV))


I.S. EN 60601-1-8:2004/A1:20061154.

Medical electrical equipment -- Part 1-8: General requirements for safety - Collateralstandard: General requirements, tests and guidance for alarm systems in medicalelectrical equipment and medical electrical systems (IEC 60601-1-8:2003/A1:2006(EQV))


I.S. EN 60601-1-2:2001/A1:20061155.

Medical electrical equipment -- Part 1-2: General requirements for safety - Collateralstandard: Electromagnetic compatibility - Requirements and tests (IEC 60601-1-2:2001/A1:2004 (EQV))


Date: 18/07/2018

I.S. EN 60598-2-12:20061156.

Luminaires -- Part 2-12: Particular requirements - Mains socket-outlet mountednightlights (IEC 60598-2-12:2006 (EQV))


I.S. EN 60065:2002/A1:20061157.

Audio, video and similar electronic apparatus - Safety requirements (IEC60065:2001/A1:2005 (MOD))


I.S. EN 62059-41:20061158.

Electricity metering equipment - Dependability -- Part 41: Reliability prediction (IEC62059-41:2006 (EQV))


I.S. EN 61300-3-18:20061159.

Fibre optic interconnecting devices and passive components - Basic test andmeasurement procedures -- Part 3-18: Examinations and measurements - Keyingaccuracy of an angled endface connector (IEC 61300-3-18:2005 (EQV))


I.S. EN 61300-2-14:20061160.

Fibre optic interconnecting devices and passive components - Basic test andmeasurement procedures -- Part 2-14: Tests - Optical power handling and damagethreshold characterization (IEC 61300-2-14:2005 (EQV))


I.S. EN 60704-3:20061161.

Household and similar electrical appliances - Test code for the determination of airborneacoustical noise -- Part 3: Procedure for determining and verifying declared noiseemission values (IEC 60704-3:2006 (EQV))


I.S. EN 60512-14-6:20061162.

Connectors for electronic equipment - Tests and measurements -- Part 14-6: Sealingtests - Test 14f: Interfacial sealing (IEC 60512-14-6:2006 (EQV))


I.S. EN 60512-14-5:20061163.

Connectors for electronic equipment - Tests and measurements -- Part 14-5: Sealingtests - Test 14e: Immersion at low air pressure (IEC 60512-14-5:2006 (EQV))


I.S. EN 60512-14-4:20061164.

Connectors for electronic equipment - Tests and measurements -- Part 14-4: Sealingtests - Test 14d: Immersion - Waterproof (IEC 60512-14-4:2006 (EQV))


I.S. EN 60512-14-2:20061165.

Connectors for electronic equipment - Tests and measurements -- Part 14-2: Sealingtests - Test 14b: Sealing - Fine air leakage (IEC 60512-14-2:2006 (EQV))


I.S. EN 60282-1:20061166.

High-voltage fuses -- Part 1: Current-limiting fuses (IEC 60282-1:2005 (EQV))


I.S. EN 60216-4-1:20061167.

Electrical insulating materials - Thermal endurance properties -- Part 4-1: Ageing ovens- Single-chamber ovens (IEC 60216-4-1:2006 (EQV))


Date: 18/07/2018

I.S. EN 62282-3-2:20061168.

Fuel cell technologies -- Part 3-2: Stationary fuel cell power systems - Performance testmethods (IEC 62282-3-2:2006 (EQV))


I.S. EN 62047-1:20061169.

Semiconductor devices - Micro-electromechanical devices -- Part 1: Terms anddefinitions (IEC 62047-1:2005 (EQV))


I.S. EN 61996-2:20061170.

Maritime navigation and radiocommunication equipment and systems - Shipbornevoyage data recorder (VDR) -- Part 2: Simplified voyage data recorder (S-VDR) -Performance requirements, methods of testing and required test results (IEC 61996-2:2006 (EQV))


I.S. EN 61810-7:20061171.

Electromechanical elementary relays -- Part 7: Test and measurement procedures (IEC61810-7:2006 (EQV))


I.S. EN 61400-12-1:20061172.

Wind turbines -- Part 12-1: Power performance measurements of electricity producingwind turbines (IEC 61400-12-1:2005 (EQV))


I.S. EN 60738-1:20061173.

Thermistors - Directly heated positive temperature coefficient -- Part 1: Genericspecification (IEC 60738-1:2006 (EQV))


I.S. EN 60706-2:20061174.

Maintainability of equipment -- Part 2: Maintainability requirements and studies duringthe design and development phase (IEC 60706-2:2006 (EQV))


I.S. EN 60297-3-104:20061175.

Mechanical structures for electronic equipment - Dimensions of mechanical structures ofthe 482,6 mm (19 in) series -- Part 3-104: Connector dependent interface dimensions ofsubracks and plug-in units (IEC 60297-3-104:2006 (EQV))


I.S. EN 60204-1:20061176.

Safety of machinery - Electrical equipment of machines -- Part 1: General requirements(IEC 60204-1:2005 (MOD))


I.S. EN 61924:20061177.

Maritime navigation and radiocommunication equipment and systems - Integratednavigation systems - Operational and performance requirements, methods of testingand required test results (IEC 61924:2006 (EQV))


I.S. EN 60076-5:20061178.

Power transformers -- Part 5: Ability to withstand short-circuit (IEC 60076-5:2006 (EQV))


I.S. EN 60464-3-2:2001/A1:20061179.

Varnishes used for electrical insulation -- Part 3: Specifications for individual materials --Sheet 2: Hot curing impregnating varnishes (IEC 60464-3-2:2001/A1:2006 (EQV))


Date: 18/07/2018

I.S. EN 60770-3:20061180.

Transmitters for use in industrial-process control systems -- Part 3: Methods forperformance evaluation of intelligent transmitters (IEC 60770-3:2006 (EQV))


I.S. EN 61076-1:20061181.

Connectors for electronic equipment - Product requirements -- Part 1: Genericspecification (IEC 61076-1:2006 (EQV))


I.S. EN 61076-3-112:20061182.

Connectors for electronic equipment -- Part 3-112: Rectangular connectors - Detailspecification for rectangular connectors with four contacts for high performance serialbus for consumer audio/video equipment (IEC 61076-3-112:2006 (EQV))


I.S. EN 61970-501:20061183.

Energy management system application program interface (EMS-API) -- Part 501:Common Information Model Resource Description Framework (CIM RDF) schema (IEC61970-501:2006 (EQV))


I.S. EN 62141:20061184.

Helical-scan digital video cassette recording format using 12,65 mm magnetic tape andincorporating MPEG-4 compression - Type D-16 format (IEC 62141:2005 (EQV))


I.S. EN 62197-1:20061185.

Connectors for electronic equipment - Quality assessment requirements -- Part 1:Generic specification (IEC 62197-1:2006 (EQV))


I.S. EN 62389:20061186.

Methods of measurement for DVD players (IEC 62389:2005 (EQV))


I.S. EN 62391-1:20061187.

Fixed electric double-layer capacitors for use in electronic equipment -- Part 1: Genericspecification (IEC 62391-1:2006 (EQV))


I.S. EN 62391-2:20061188.

Fixed electric double-layer capacitors for use in electronic equipment -- Part 2: Sectionalspecification - Electric double-layer capacitors for power application (IEC 62391-2:2006(EQV))


I.S. EN 62391-2-1:20061189.

Fixed electric double-layer capacitors for use in electronic equipment -- Part 2-1: Blankdetail specification - Electric-double layer capacitors for power application - Assessmentlevel EZ (IEC 62391-2-1:2006 (EQV))


I.S. EN 14638-1:20061190.

Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding150 litres - Part 1: Welded austenitic stainless steel cylinders made to a design justifiedby experimental methods


Date: 18/07/2018

I.S. EN ISO 16148:20061191.

Gas cylinders - Refillable seamless steel gas cylinders - Acoustic emission testing (AT)for periodic inspection (ISO 16148:2006)


I.S. EN 71-8:2003/A1:20061192.

Safety of toys - Part 8: Swings, slides and similar activity toys for indoor and outdoorfamily domestic use


I.S. EN ISO 7493:20061193.

Dentistry - Operator's stool (ISO 7493:2006)


I.S. EN 1983:20061194.

Industrial valves - Steel ball valves


I.S. EN ISO 14323:20061195.

Resistance spot welding and projection welds - Destructive testing of welds - Specimendimensions and procedure for impact shear test and cross-tension testing (ISO14323:2006)


I.S. EN ISO 11145:20061196.

Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbols(ISO 11145:2006)


I.S. EN ISO 11554:20061197.

Optics and photonics - Lasers and laser-related equipment - Test methods for laserbeam power, energy and temporal characteristics (ISO 11554:2006)


I.S. EN 13329:20061198.

Laminate floor coverings - Elements with a surface layer based on aminoplasticthermosetting resins - Specifications, requirements and test methods


I.S. EN ISO 6165:20061199.

Earth-moving machinery - Basic types - Identification and terms and definitions (ISO6165:2006)


I.S. EN ISO 11979-3:20061200.

Ophthalmic implants - Intraocular lenses - Part 3: Mechanical properties and testmethods (ISO 11979-3:2006)


I.S. EN ISO 11979-7:20061201.

Ophthalmic implants - Intraocular lenses - Part 7: Clinical investigations (ISO 11979-7:2006)


I.S. EN 15062:20061202.

Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives- Testing ageing of bonds under specified conditions


I.S. EN ISO 21171:20061203.

Medical gloves - Determination of removable surface powder (ISO 21171:2006)


Date: 18/07/2018

I.S. EN 1359:1998/A1:20061204.

Gas meters - Diaphragm meters


I.S. EN 12480:2002/A1:20061205.

Gas meters - Rotary displacement gas meters


I.S. EN 12261:2002/A1:20061206.

Gas meters - Turbine gas meters


I.S. EN 14460:20061207.

Explosion resistant equipment


I.S. EN 13924:20061208.

Bitumen and bituminous binders - Specifications for hard paving grade bitumens


I.S. EN 3646-003:20061209.

Aerospace series - Connectors, electrical, circular, bayonet coupling, operatingtemperature 175 °C or 200 °C continuous - Part 003: Receptacle, square flangemounting - Product standard


I.S. EN 3646-004:20061210.

Aerospace series - Connectors, electrical, circular, bayonet coupling, operatingtemperature 175 °C or 200 °C continuous - Part 004: Receptacle, jam-nut mounting -Product standard


I.S. EN 3646-005:20061211.

Aerospace series - Connectors, electrical, circular, bayonet coupling, operatingtemperature 175 °C or 200 °C continuous - Part 005: Receptacle, hermetic, squareflange mounting -Product standard


I.S. EN 3646-006:20061212.

Aerospace series - Connectors, electrical, circular, bayonet coupling, operatingtemperature 175 °C or 200 °C continuous - Part 006: Receptacle, hermetic, jam-nutmounting - Product standard


I.S. EN 3646-007:20061213.

Aerospace series - Connectors, electrical, circular, bayonet coupling, operatingtemperature 175 °C or 200 °C continuous - Part 007: Receptacle, hermetic, roundflange, welding or brazingmounting - Product standard


I.S. EN 3646-008:20061214.

Aerospace series - Connectors, electrical, circular, bayonet coupling, operatingtemperature 175 °C or 200 °C continuous - Part 008: Plug - Product standard


I.S. EN 3646-009:20061215.

Aerospace series - Connectors, electrical, circular, bayonet coupling, operatingtemperature 175 °C or 200 °C continuous - Part 009: Protective cover for receptacle -Product standard


Date: 18/07/2018 Page

I.S. EN 3646-010:20061216.

Aerospace series - Connectors, electrical, circular, bayonet coupling, operatingtemperature 175 °C or 200 °C continuous - Part 010: Protective cover for plug - Productstandard


I.S. EN 4401:20061217.

Aerospace series - Lockbolts, protruding head, sheartype, close tolerance, in titaniumalloy TI-P64001, with aluminium pigmented coating, metric series - Classification: 1 100MPa (at ambienttemperature) / 315 °C


I.S. EN 3646-011:20061218.

Aerospace series - Connectors, electrical, circular, bayonet coupling, operatingtemperature 175 °C or 200 °C continuous - Part 011: Dummy receptacle - Productstandard


I.S. EN 4035:20061219.

Aerospace series - Rod ends, adjustable with self-aligning double row ball bearing incorrosion resisting steel, reduced internal radial clearance and threaded shank intitanium alloy -Dimensions and loads


I.S. EN 4040:20061220.

Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner with wide inner ring - Elevated loads at ambient temperature -Dimensions and loads


I.S. EN ISO 13769:20061221.

Gas cylinders - Stamp marking (ISO 13769:2002)


I.S. EN 250:2000/A1:20061222.

Respiratory equipment - Open-circuit self-contained compressedair diving apparatus - Requirements, testing, marking


I.S. EN 13022-1:20061223.

Glass in building - Structural sealant glazing - Part 1: Glass products for structuralsealant glazing systems for supported and unsupported monolithic and multiple glazing


I.S. EN 15434:20061224.

Glass in building - Product standard for structural and/or ultraviolet resistant sealant (foruse with structural sealant glazing and/or insulating glass units with exposed seals)


I.S. EN 1057:20061225.

Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitaryand heating applications


I.S. EN ISO 6272-2:20061226.

Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2002)


Date: 18/07/2018 Page

I.S. EN ISO 16862:20061227.

Paints and varnishes - Evaluation of sag resistance (ISO 16862:2003)


I.S. CEN TS 14758-3:20061228.

Plastics piping systems for non-pressure underground drainage and sewerage -Polypropylene with mineral modifier(s) (PP-MD) - Part 3: Guidance for installation


I.S. CEN TR 15419:20061229.

Protective clothing - Guidelines for selection, use, care and maintenance of chemicalprotective clothing


I.S. CEN TR 15321:20061230.

Guidelines on the selection, use, care and maintenance of protective clothing


I.S. CEN TS 14999:20061231.

Adhesives for thermoplastic piping systems - Accelerated aging test of adhesives


I.S. EN 14561:20061232.

Chemical disinfectants and antiseptics - Quantitative carrier test for the evaluation ofbactericidal activity for instruments used in the medical area - Test method andrequirements (phase 2, step2)


I.S. EN 14562:20061233.

Chemical disinfectants and antiseptics - Quantitative carrier test for the evaluation offungicidal or yeasticidal activity for instruments used in the medical area - Test methodand requirements (phase 2, step 2)


I.S. EN 13108-1:20061234.

Bituminous mixtures - Material specifications - Part 1: Asphalt Concrete


I.S. EN 13108-6:20061235.

Bituminous mixtures - Material specifications - Part 6: Mastic Asphalt


I.S. EN 13108-3:20061236.

Bituminous mixtures - Material specifications - Part 3: Soft Asphalt


I.S. EN 13108-7:20061237.

Bituminous mixtures - Material specifications - Part 7: Porous Asphalt


I.S. EN 13108-5:20061238.

Bituminous mixtures - Material specifications - Part 5: Stone Mastic Asphalt


I.S. EN 13108-4:20061239.

Bituminous mixtures - Material specifications - Part 4: Hot Rolled Asphalt


I.S. EN 13108-2:20061240.

Bituminous mixtures - Material specifications - Part 2: Asphalt Concrete for very thinlayers


Date: 18/07/2018 Page

I.S. CEN TR 15350:20061241.

Mechanical vibration - Guideline for the assessment of exposure to hand-transmittedvibration using available information including that provided by manufacturers ofmachinery


I.S. EN 13232-9:20061242.

Railway applications - Track - Switches and crossings - Part 9: Layouts


I.S. CEN TS 15213-2:20061243.

Road transport and traffic telematics - After-theft systems for the recovery of stolenvehicles - Part 2: Common status message elements


I.S. CEN TS 14383-4:20061244.

Prevention of crime - Urban planning and design - Part 4: Shops and offices


I.S. CEN TS 14014:20061245.

Postal services - Hybrid Mail - XML definition of encapsulation of letters for automatedpostal handling


I.S. CEN TR 15369:20061246.

Postal services - Quality of service - Guide for the implementation of EN 14534Measurement of the transit time of end-to-end services for bulk mail


I.S. CEN TS 15357:20061247.

Solid recovered fuels - Terminology, definitions and descriptions


I.S. CEN TS 15358:20061248.

Solid recovered fuels - Quality management systems - Particular requirements for theirapplication to the production of solid recovered fuels


I.S. EN 13022-2:20061249.

Glass in building - Structural sealant glazing - Part 2: Assembly rules


I.S. EN ISO 13628-6:20061250.

Petroleum and natural gas industries - Design and operation of subsea productionsystems - Part 6: Subsea production control systems (ISO 13628-6:2006)


I.S. EN 12916:20061251.

Petroleum products - Determination of aromatic hydrocarbon types in middle distillates -High performance liquid chromatography method with refractive index detection


I.S. EN ISO 13697:20061252.

Optics and photonics - Lasers and laser-related equipment - Test methods for specularreflectance and regular transmittance of optical laser components (ISO 13697:2006)


I.S. EN 1366-4:20061253.

Fire resistance tests for service installations - Part 4: Linear joint seals


Date: 18/07/2018 Page

I.S. EN 14527:20061254.

Shower trays for domestic purposes


I.S. EN 15031:20061255.

Chemicals used for treatment of swimming pool water - Aluminium based coagulants


I.S. EN 15074:20061256.

Chemicals used for treatment of swimming pool water - Ozone


I.S. EN 15078:20061257.

Chemicals used for treatment of swimming pool water - Sulfuric acid


I.S. EN 1856-1:2003/A1:20061258.

Chimneys - Requirements for metal chimneys - Part 1: System chimney products


I.S. EN 1392:20061259.

Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives- Testing of bond strength under specified conditions


I.S. EN 14837:20061260.

Surfaces for sports areas - Determination of slip resistance


I.S. EN 15110:20061261.

Water quality - Guidance standard for the sampling of zooplankton from standing waters


I.S. EN 13231-1:20061262.

Railway applications - Track - Acceptance of works - Part 1: Works on ballasted track -Plain line


I.S. EN 13231-2:20061263.

Railway applications - Track - Acceptance of works - Part 2: Works on ballasted track -Switches and crossings


I.S. EN 13231-3:20061264.

Railway applications - Track - Acceptance of works - Part 3: Acceptance of rail grinding,milling and planing work in track


I.S. EN 15058:20061265.

Stationary source emissions - Determination of the mass concentration of carbonmonoxide (CO) - Reference method: Non-dispersive infrared spectrometry


I.S. EN 15054:20061266.

Non fatty foods - Determination of chlormequat and mepiquat - LC-MS method


I.S. EN 15055:20061267.

Non fatty foods - Determination of chlormequat and mepiquat - LC-MS/MS method


Date: 18/07/2018 Page

I.S. EN 14185-2:20061268.

Non fatty foods - Determination of N-methylcarbamate residues - Part 2: HPLC methodwith clean-up on a diatomaceous earth column


I.S. CEN TR 15298:20061269.

Foodstuffs - Sample comminution for mycotoxins analysis - Comparison between drymilling and slurry mixing


I.S. EN 14894:20061270.

LPG equipment and accessories - Cylinder and drum marking


I.S. EN 14175-6:20061271.

Fume cupboards - Part 6: Variable air volume fume cupboards


I.S. EN 2680:20061272.

Aerospace series - Nuts, anchor, self-locking, floating, selfaligning, two lug, in alloysteel, cadmium plated, MoS2 lubricated - Classification: 900 MPa (at ambienttemperature) / 235 °C


I.S. EN 3708-001:20061273.

Aerospace series - Modular interconnection systems - Terminal junction systems - Part001: Technical specification


I.S. EN 3716-001:20061274.

Aerospace series - Connector, single-way, with triaxial interface, for transmission ofdigital data - Part 001: Technical specification


I.S. EN 2327:20061275.

Aerospace series - Washers, lock, with radial serrations in alloy steel, cadmium platedfor flight control rods - Dimensions


I.S. EN 2328:20061276.

Aerospace series - Washers, tab in corrosion resisting steel, cadmium plated for flightcontrol rods - Dimensions


I.S. EN 2596:20061277.

Aerospace series - Washers, lock, with radial serrations in corrosion resisting steel,cadmium plated for flight control rods - Dimensions


I.S. EN 2546:20061278.

Aerospace series - Washers, lock with radial serrations in corrosion resisting steelpassivated for flight control rods - Dimensions


I.S. EN 3155-045:20061279.

Aerospace series - Electrical contacts used in elements of connection - Part 045:Contacts, electrical, female, type A, double crimping, class T - Product standard


Date: 18/07/2018 Page

I.S. EN 3155-028:20061280.

Aerospace series - Electrical contacts used in elements of connection - Part 028:Contacts, electrical, coaxial, shielded, size 16, male, type D, crimp, class R - Productstandard


I.S. EN 2337:20061281.

Aerospace series - Spherical plain bearings - Technical specification


I.S. EN 2549:20061282.

Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, shortthread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100 MPa (atambienttemperature) / 315 °C


I.S. EN 2588:20061283.

Aerospace series - Bearings, spherical plain in corrosion resisting steel with assemblyslots - Dimensions and loads


I.S. EN 3475-302:20061284.

Aerospace series - Cable, electrical, aircraft use - Test methods - Part 302: Voltageproof test


I.S. EN 4402:20061285.

Aerospace series - Lockbolts, 100° countersunk normal head, sheartype, closetolerance, in titanium alloy TI-P64001, with aluminium pigmented coating, metric series -Classification: 1 100 MPa (at ambient temperature) / 315 °C


I.S. EN 2881:20061286.

Aerospace series - Nuts, anchor, self-locking, fuel resistant, sealing, floating, two lug,with counterbore, in corrosion resisting steel, passivated, MoS2 lubricated -Classification: 900 MPa (at ambient temperature) / 120 C


I.S. EN 4111:20061287.

Aerospace series - Wrenches, splined, socket for pipe fittings - Technical specification


I.S. EN 4199-001:20061288.

Aerospace series - Bonding straps for aircraft - Part 001: Technical specification


I.S. EN 4199-002:20061289.

Aerospace series - Bonding straps for aircraft - Part 002: Index of product standard


I.S. EN 4199-006:20061290.

Aerospace series - Bonding straps for aircraft - Part 006: Round braid copperconductors for bonding straps, tin plated up to 150 °C or nickel plated up to 260 °C -Product standard


I.S. EN 4617:20061291.

Aerospace series - Recommended practices for standardising company standards


Date: 18/07/2018 Page

I.S. EN 3716-002:20061292.

Aerospace series - Connectors, single-way with triaxial interface, for transmission ofdigital data - Part 002: Conditions of use and list of product standards


I.S. EN 3716-003:20061293.

Aerospace series - Connectors, single-way with triaxial interface, for transmission ofdigital data - Part 003: Solder receptacle - Product standard


I.S. EN 3716-004:20061294.

Aerospace series - Connectors, single-way with triaxial interface, for transmission ofdigital data - Part 004: Solder plug - Product standard


I.S. EN 4036:20061295.

Aerospace series - Rod ends, adjustable with self-aligning double row ball bearing andthreaded shank in corrosion resisting steel, reduced internal radial clearance -Dimensions and loads


I.S. EN 4529-001:20061296.

Aerospace series - Elements of electrical and optical connection - Sealing plugs - Part001: Technical specification


I.S. EN 4529-002:20061297.

Aerospace series - Elements of electrical and optical connection - Sealing plugs - Part002: Index of product standards


I.S. EN 4529-003:20061298.

Aerospace series - Elements of electrical and optical connection - Sealing plugs - Part003: Class T - Product standard


I.S. EN 4530-001:20061299.

Aerospace series - Sealing sleeves used in elements of connection - Part 001:Technical specification


I.S. EN 4530-002:20061300.

Aerospace series - Sealing sleeves used in elements of connection - Part 002: List andutilization of sealing sleeves


I.S. EN 4008-014:20061301.

Aerospace series - Elements of electrical and optical connection - Crimping tools andassociated accessories - Part 014: Turret for crimping tool M22520/31-01 - Productstandard


I.S. EN 3708-002:20061302.

Aerospace series - Modular interconnection systems - Terminal junction systems - Part002: Performance specification


I.S. EN 3708-003:20061303.

Aerospace series - Modular interconnection systems - Terminal junction systems - Part003: Removable feedback modules version, sealed - Product standard


Date: 18/07/2018 Page

I.S. EN 3708-004:20061304.

Aerospace series - Modular interconnection systems - Terminal junction systems - Part004: Removable feedback modules version, unsealed - Product standard


I.S. EN 3708-005:20061305.

Aerospace series - Modular interconnection systems - Terminal junction systems - Part005: Frames with accessories for feedback modules version, sealed and unsealed -Productstandard


I.S. EN 15038:20061306.

Translation services - Service requirements


I.S. CWA 15538:20061307.

Coding for customers in the rail transport chain


I.S. CWA 15539:20061308.

Numbering of and coding system for trains


I.S. CWA 15540:20061309.

Coding for railway undertakings, infrastructure managers and other companies, involvedin the rail transport chain


I.S. CWA 15541:20061310.

Coding for railway business locations


I.S. CEN TS 15397:20061311.

Wood preservatives - Method for natural preconditioning out of ground contact of treatedwood specimens prior to biological laboratory test

4 AUGUST 2006Date published

I.S. CEN TS 12390-9:20061312.

Testing hardened concrete - Part 9: Freeze-thaw resistance - Scaling


I.S. EN 54-3:2001/A2:20061313.

Fire detection and fire alarm systems - Part 3: Fire alarm devices - Sounders


I.S. EN 54-21:20061314.

Fire detection and fire alarm systems - Part 21: Alarm transmission and fault warningrouting equipment


I.S. EN 285:20061315.

Sterilization - Steam sterilizers - Large sterilizers


I.S. EN 13523-25:20061316.

Coil coated metals - Test methods - Part 25: Resistance to humidity


I.S. EN 13523-26:20061317.

Coil coated metals - Test methods - Part 26: Resistance to condensation of water


Date: 18/07/2018 Page

I.S. EN 966:1996/A2:20061318.

Helmets for airborne sports


I.S. EN 14901:20061319.

Ductile iron pipes, fittings and accessories - Epoxy coating (heavy duty) of ductile ironfittings and accessories - Requirements and test methods


I.S. EN 14227-11:20061320.

Hydraulically bound mixtures - Specifications - Part 11: Soil treated by lime


I.S. EN 14227-14:20061321.

Hydraulically bound mixtures - Specifications - Part 14: Soil treated by fly ash


I.S. EN 14227-12:20061322.

Hydraulically bound mixtures - Specifications - Part 12: Soil treated by slag


I.S. EN 14227-10:20061323.

Hydraulically bound mixtures - Specifications - Part 10: Soil treated by cement


I.S. CEN TS 15231:20061324.

Open data communication in building automation, controls and building management -Mapping between Lonworks and BACnet


I.S. CEN TS 15354:20061325.

Plastics - Extruded and/or calendered, non-reinforced film and sheeting made ofplasticized poly(vinyl chloride) (PVC-P) - Guidance for characterisation and designation


I.S. EN 14967:20061326.

Flexible sheets for waterproofing - Bitumen damp proof courses - Definitions andcharacteristics


I.S. EN 13848-2:20061327.

Railway applications - Track - Track geometry quality - Part 2: Measuring systems -Track recording vehicles


I.S. EN 12710:20061328.

Fibreboard drums - Removable head (open head) drums with closing rings with anominal capacity of 15 l to 250 l


I.S. EN 12300:1998/A1:20061329.

Cryogenic vessels - Cleanliness for cryogenic service


I.S. CEN TS 14689:20061330.

Leather - Physical and mechanical tests - Determination of bagginess, creep andrelaxation


I.S. EN 14034-2:20061331.

Determination of explosion characteristics of dust clouds - Part 2: Determination of themaximum rate of explosion pressure rise (dp/dt)max of dust clouds


Date: 18/07/2018 Page

I.S. EN 14034-3:20061332.

Determination of explosion characteristics of dust clouds - Part 3: Determination of thelower explosion limit LEL of dust clouds


I.S. CEN TR 15281:20061333.

Guidance on Inerting for the Prevention of Explosions


I.S. CEN TS 15359:20061334.

Solid recovered fuels - Specifications and classes


I.S. CEN TS 15439:20061335.

Biomass gasification - Tar and particles in product gases - Sampling and analysis


I.S. EN 10341:20061336.

Cold rolled electrical non-alloy and alloy steel sheet and strip delivered in the semi-processed state


I.S. EN 14227-13:20061337.

Hydraulically bound mixtures - Specifications - Part 13: Soil treated by hydraulic roadbinder


I.S. EN 60601-2-13:20061338.

Medical electrical equipment -- Part 2-13: Particular requirements for the safety andessential performance of anaesthetic systems (IEC 60601-2-13:2003 (EQV))


I.S. EN 60601-2-12:20061339.

Medical electrical equipment -- Part 2-12: Particular requirements for the safety of lungventilators - Critical care ventilators (IEC 60601-2-12:2001 (EQV))


I.S. EN 60335-2-76:2005/A1:20061340.

Household and similar electrical appliances - Safety -- Part 2-76: Particular requirementsfor electric fence energizers (IEC 60335-2-76:2002/A1:2006 (EQV))


I.S. EN 60335-2-74:2003/A1:20061341.

Household and similar electrical appliances - Safety -- Part 2-74: Particular requirementsfor portable immersion heaters (IEC 60335-2-74:2002/A1:2006 (EQV))


I.S. EN 60335-2-31:2005/A1:20061342.

Household and similar electrical appliances - Safety -- Part 2-31: Particular requirementsfor range hoods (IEC 60335-2-31:2002/A1:2006 (EQV))


I.S. EN 60335-2-11:2003/A2:20061343.

Household and similar electrical appliances - Safety -- Part 2-11: Particular requirementsfor tumble dryers (IEC 60335-2-11:2002/A2:2006 (EQV))


I.S. EN 50421:20061344.

Product standard to demonstrate the compliance of stand alone broadcast transmitterswith the reference levels or the basic restrictions related to public human exposure toradio frequency electromagnetic fields (30 MHz - 40 GHz)


Date: 18/07/2018 Page

I.S. EN 50420:20061345.

Basic standard for the evaluation of human exposure to electromagnetic fields from astand alone broadcast transmitter (30 MHz - 40 GHz)


I.S. EN 50401:20061346.

Product standard to demonstrate the compliance of fixed equipment for radiotransmission (110 MHz - 40 GHz) intended for use in wireless telecommunicationnetworks with the basic restrictions or the reference levels related to general publicexposure to radio frequency electromagnetic fields, when put into service


I.S. EN 50400:20061347.

Basic standard to demonstrate the compliance of fixed equipment for radio transmission(110 MHz - 40 GHz) intended for use in wireless telecommunication networks with thebasic restrictions or the reference levels related to general public exposure to radiofrequency electromagnetic fields, when put into service


I.S. EN 50441-1:20061348.

Cables for indoor residential telecommunication installations -- Part 1: Unscreenedcables - Grade 1


I.S. EN 50441-2:20061349.

Cables for indoor residential telecommunication installations -- Part 2: Screened cables -Grade 2


I.S. EN 50441-3:20061350.

Cables for indoor residential telecommunication installations -- Part 3: Screened cables -Grade 3


I.S. EN 60335-2-4:20061351.

Household and similar electrical appliances - Safety -- Part 2-4: Particular requirementsfor spin extractors (IEC 60335-2-4:2002 (EQV))


I.S. EN 60335-2-4:2002/A2:20061352.

Household and similar electrical appliances - Safety -- Part 2-4: Particular requirementsfor spin extractors (IEC 60335-2-4:2002/A2:2006 (EQV))


I.S. EN 60335-2-7:2003/A2:20061353.

Household and similar electrical appliances - Safety -- Part 2-7: Particular requirementsfor washing machines (IEC 60335-2-7:2002/A2:2006 (EQV))


I.S. EN 60335-2-9:2003/A2:20061354.

Household and similar electrical appliances - Safety -- Part 2-9: Particular requirementsfor grills, toasters and similar portable cooking appliances (IEC 60335-2-9:2002/A2:2006(EQV))


I.S. EN 60556:20061355.

Gyromagnetic materials intended for application at microwave frequencies - Measuringmethods for properties (IEC 60556:2006 (EQV))


Date: 18/07/2018 Page

I.S. EN 60921:2004/A1:20061356.

Ballasts for tubular fluorescent lamps - Performance requirements (IEC60921:2004/A1:2006 (EQV))


I.S. EN 61347-2-2:2001/A2:20061357.



I.S. EN 61400-11:2003/A1:20061358.

Wind turbine generator systems -- Part 11: Acoustic noise measurement techniques(IEC 61400-11:2002/A1:2006 (EQV))


I.S. EN 61770:1999/A2:20061359.

Electric appliances connected to the water mains - Avoidance of backsiphonage andfailure of hose-sets (IEC 61770:1998/A2:2006 (EQV))


I.S. EN 13445-3:2002/A6:20061360.



I.S. CLC/TS 61496-2:20061361.

Safety of machinery - Electro-sensitive protective equipment -- Part 2: Particularrequirements for equipment using active opto-electronic protective devices (AOPDs)(IEC 61496-2:2006 (EQV))


I.S. EN 60838-2-2:20061362.

Miscellaneous lampholders -- Part 2-2: Particular requirements - Connectors for LED-modules (IEC 60838-2-2:2006 (EQV))


I.S. EN 61048:20061363.

Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lampcircuits - General and safety requirements (IEC 61048:2006 (EQV))


I.S. EN 61756-1:20061364.

Fibre optic interconnecting devices and passive components - Interface standard forfibre management systems -- Part 1: General and guidance (IEC 61756-1:2006 (EQV))


I.S. EN 62333-1:20061365.

Noise suppression sheet for digital devices and equipment -- Part 1: Definitions andgeneral properties (IEC 62333-1:2006 (EQV))


I.S. EN 62333-2:20061366.

Noise suppression sheet for digital devices and equipment -- Part 2: Measuring methods(IEC 62333-2:2006 (EQV))


I.S. EN 50083-2:20061367.

Cable networks for television signals, sound signals and interactive services -- Part 2:Electromagnetic compatibility for equipment


Date: 18/07/2018 Page

I.S. EN 60194:20061368.

Printed board design, manufacture and assembly - Terms and definitions (IEC60194:2006 (EQV))


I.S. EN 60205:20061369.

Calculation of the effective parameters of magnetic piece parts (IEC 60205:2006 (EQV))


I.S. EN 60216-3:20061370.

Electrical insulating materials - Thermal endurance properties -- Part 3: Instructions forcalculating thermal endurance characteristics (IEC 60216-3:2006 (EQV))


I.S. EN 61082-1:20061371.

Preparation of documents used in electrotechnology -- Part 1: Rules (IEC 61082-1:2006(EQV))


I.S. EN 61400-2:20061372.

Wind turbines -- Part 2: Design requirements for small wind turbines (IEC 61400-2:2006(EQV))


I.S. EN 61760-1:20061373.

Surface mounting technology -- Part 1: Standard method for the specification of surfacemounting components (SMDs) (IEC 61760-1:2006 (EQV))


I.S. EN 61937-6:20061374.

Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC60958 -- Part 6: Non-linear PCM bitstreams according to the MPEG-2 AAC and MPEG-4AAC audio formats (IEC 61937-6:2006 (EQV))


I.S. EN 62071-1:20061375.

Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape -Format D-7 -- Part 1: VTR specifications (IEC 62071-1:2005 (EQV))


I.S. EN 62071-2:20061376.

Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape -Format D-7 -- Part 2: Compression format (IEC 62071-2:2005 (EQV))


I.S. EN 62071-3:20061377.

Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape -Format D-7 -- Part 3: Data stream format (IEC 62071-3:2005 (EQV))


I.S. EN 62304:20061378.

Medical device software - Software life-cycle processes (IEC 62304:2006 (EQV))


I.S. EN ISO 15136-2:20061379.

Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift -Part 2: Surface-drive systems (ISO 15136-2:2006)


Date: 18/07/2018 Page

I.S. EN ISO 9173-1:20061380.

Dentistry - Extraction forceps - Part 1: General requirements and test methods (ISO9173-1:2006)


I.S. EN 143:2000/A1:20061381.

Respiratory protective devices - Particle filters - Requirements, testing, marking


I.S. EN ISO 18472:20061382.

Sterilization of health care products - Biological and chemical indicators - Testequipment (ISO 18472:2006)


I.S. EN ISO 14505-3:20061383.

Ergonomics of the thermal environment - Evaluation of the thermal environment invehicles - Part 3: Evaluation of thermal comfort using human subjects (ISO 14505-3:2006)


I.S. EN ISO 14880-3:20061384.

Optics and phonotics - Microlens arrays - Part 3: Test methods for optical propertiesother than wavefront aberrations (ISO 14880-3:2006)


I.S. EN ISO 14880-4:20061385.

Optics and photonics - Microlens arrays - Part 4: Test methods for geometricalproperties (ISO 14880-4:2006)


I.S. EN ISO 18233:20061386.

Acoustics - Application of new measurement methods in building and room acoustics(ISO 18233:2006)


I.S. EN 14898:20061387.

Water conditioning equipment inside buildings - Active media filters - Requirements forperformance, safety and testing


I.S. EN 12911:20061388.

Products used for treatment of water intended for human consumption - Manganesegreensand


I.S. EN 1562:1997/A1:20061389.

Founding - Malleable cast irons


I.S. EN 13835:2002/A1:20061390.

Founding - Austenitic cast irons


I.S. EN 13795-3:20061391.

Surgical drapes, gowns and clean air suits, used as medical devices for patients, clinicalstaff and equipment - Part 3: Performance requirements and performance levels


I.S. EN 12353:20061392.

Chemical disinfectants and antiseptics - Preservation of test organisms used for thedetermination of bactericidal, sporicidal and fungicidal activity


Date: 18/07/2018 Page

I.S. EN 1317-2:1998/A1:20061393.

Road restraint systems - Part 2: Performance classes, impact test acceptance criteriaand test methods for safety


I.S. EN 14750-1:20061394.

Railway applications - Air conditioning for urban and suburban rolling stock - Part 1:Comfort parameters


I.S. EN 14750-2:20061395.

Railway applications - Air conditioning for urban and suburban rolling stock - Part 2:Type tests


I.S. CEN ISO TS 18234-1:20061396.

Traffic and Travel Information (TTI) - TTI via Transport Protocol Expert Group (TPEG)data-streams - Part 1: Introduction, Numbering and Versions (ISO/TS 18234-1:2006)


I.S. CEN ISO TS 18234-2:20061397.

Traffic and Traveller Information (TTI) - TTI via Transport Protocol Expert Group (TPEG)data-streams - Part 2: Syntax, Semantics and Framing Structure (SSF) (ISO/TS 18234-2:2006)


I.S. CEN ISO TS 18234-3:20061398.

Traffic and Travel Information (TTI) - TTI via Transport Protocol Expert Group (TPEG)data-streams - Part 3: Service and Network Information (SNI) application (ISO/TS 18234-3:2006)


I.S. CEN ISO TS 18234-4:20061399.

Traffic and Travel Information (TTI) - TTI via Transport Protocol Expert Group (TPEG)data-streams - Part 4: Road Traffic Message (RTM) application (ISO/TS 18234-4:2006)


I.S. CEN ISO TS 18234-5:20061400.

Traffic and Travel Information (TTI) - TTI via Transport Protocol Expert Group (TPEG)data-streams - Part 5: Public Transport Information (PTI) application (ISO/TS 18234-5:2006)


I.S. CEN ISO TS 18234-6:20061401.

Traffic and Travel Information (TTI) - TTI via Transport Protocol Expert Group (TPEG)data-streams - Part 6: Location referencing applications (ISO/TS 18234-6:2006)


I.S. CEN ISO TS 14822-1:20061402.

Traffic and Travel Information - General specifications for medium-range pre-informationvia dedicated short-range communication - Part 1: Downlink (ISO/TS 14822-1:2006)


I.S. EN ISO 7197:20061403.

Neurosurgical implants - Sterile, single-use hydrocephalus shunts and components (ISO7197:2006)


I.S. EN ISO 10218-1:20061404.

Robots for industrial environments - Safety requirements - Part 1: Robot (ISO 10218-1:2006)


Date: 18/07/2018 Page

I.S. EN ISO 17375:20061405.

Animal feeding stuffs - Determination of aflatoxin B1 (ISO 17375:2006)


I.S. EN ISO 21649:20061406.

Needle-free injectors for medical use - Requirements and test methods (ISO21649:2006)


I.S. EN 14931:20061407.

Pressure vessels for human occupancy (PVHO) - Multi-place pressure chambersystems for hyperbaric therapy - Performance, safety requirements and testing


I.S. EN ISO 8665:20061408.

Small craft - Marine propulsion reciprocating internal combustion engines - Powermeasurements and declarations (ISO 8665:2006)


I.S. EN 14538:20061409.

Fat and oil derivatives - Fatty acid methyl ester (FAME) - Determination of Ca, K, Mgand Na content by optical emission spectral analysis with inductively coupled plasma(ICP OES)


I.S. EN 14488-6:20061410.

Testing sprayed concrete - Part 6: Thickness of concrete on a substrate


I.S. EN 14488-2:20061411.

Testing sprayed concrete - Part 2: Compressive strength of young sprayed concrete


I.S. EN 534:20061412.

Corrugated bitumen sheets - Product specification and test methods


I.S. EN 14958:20061413.

Food processing machinery - Machinery for grinding and processing flour and semolina- Safety and hygiene requirements


I.S. EN ISO 11979-5:20061414.

Ophthalmic implants - Intraocular lenses - Part 5: Biocompatibility (ISO 11979-5:2006)


I.S. EN ISO 15004-1:20061415.

Ophthalmic instruments - Fundamental requirements and test methods - Part 1: Generalrequirements applicable to all ophthalmic instruments (ISO 15004-1:2006)


I.S. EN ISO 10942:20061416.

Ophthalmic instruments - Direct ophthalmoscopes (ISO 10942:2006)


I.S. EN ISO 10943:20061417.

Ophthalmic instruments - Indirect ophthalmoscopes (ISO 10943:2006)


I.S. EN 416-2:20061418.

Single burner gas-fired overhead radiant tube heaters for nondomestic use - Part 2:Rational use of energy


Date: 18/07/2018 Page

I.S. EN 419-2:20061419.

Non-domestic gas-fired overhead luminous radiant heaters - Part 2: Rational use ofenergy


I.S. EN 14150:20061420.

Geosynthetic barriers - Determination of permeability to liquids


I.S. EN 14996:20061421.

Water quality - Guidance on assuring the quality of biological and ecologicalassessments in the aquatic environment


I.S. EN 14246:20061422.

Gypsum elements for suspended ceilings - Definitions, requirements and test methods


I.S. EN 14785:20061423.

Residential space heating appliances fired by wood pellets - Requirements and testmethods


I.S. CWA 14641:20061424.

Security management system for secure printing


I.S. CWA 15555:20061425.

Guidelines and support for building application profiles in elearning


I.S. CWA 15554:20061426.

Specifications for a Web Accessibility Conformity Assessment Scheme and a WebAccessibility Quality Mark


I.S. CEN TS 772-22:20061427.

Methods of test for masonry units - Part 22: Determination of freeze/thaw resistance ofclay masonry units


I.S. EN 415-5:20061428.

Safety of packaging machines - Wrapping machines


I.S. EN 14897:20061429.

Water conditioning equipment inside buildings - Devices using mercury low-pressureultraviolet radiators - Requirements for performance, safety and testing


I.S. EN 13411-7:20061430.

Terminations for steel wire ropes - Safety - Part 7: Symmetric wedge socket


I.S. CEN TS 15418:20061431.

Methods of test for dense refractory products - Guidelines for testing the corrosion ofrefractories caused by liquids


I.S. EN 14383-1:20061432.

Prevention of crime - Urban planning and building design - Part 1: Definition of specificterms


Date: 18/07/2018 Page

I.S. EN 2235:20061433.

Aerospace series - Single and multicore electrical cables, screened and jacketed


I.S. EN 2856:20061434.

Aerospace series - Nuts, anchor, self-locking, fixed, closed corner, reduced series, withcounterbore - Classification: 1 100 MPa/235 °C


I.S. EN 3425:20061435.

Aerospace series - Groove dimensions for axial mounting external type retaining rings


I.S. EN 3426:20061436.

Aerospace series - Groove dimensions for axial mounting external type retaining rings


I.S. EN 3427:20061437.

Aerospace series - Groove dimensions for radial mounting retaining rings


I.S. EN 3727:20061438.

Aerospace series - Bearings, airframe rolling rigid with flanged alignment housing -Technical specification


I.S. EN 4608-001:20061439.

Aerospace series - Cable, electrical, fire resistant - Single and twisted multicoreassembly, screened (braided) and jacketed - Operating temperatures between - 65 °Cand 260 °C - Part 001: Technical specification


I.S. EN 4608-002:20061440.

Aerospace series - Cable, electrical, fire resistant - Single and twisted multicoreassembly, screened (braided) and jacketed - Operating temperatures between - 65 °Cand 260 °C - Part 002: General


I.S. EN 2267-005:20061441.

Aerospace series - Cables, electrical, for general purpose - Operating temperaturesbetween - 55 C and 260 C - Part 005: UV laser printable - Product standard


I.S. EN 4495:20061442.

Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, shortthread, in titanium alloy, anodized, with aluminium pigmented coating, metric series -Classification: 1 100 MPa (at ambient temperature) / 315 °C


I.S. EN 4501:20061443.

Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, shortthread, in titanium alloy, anodized, with aluminium pigmented coating, metric series -Classification: 1 100 MPa (at ambient temperature) / 315 °C


I.S. EN 4509:20061444.

Aerospace series - Screws, 100 countersunk normal head, offset cruciform recess,threaded to head, in titanium alloy, anodized, with aluminium pigmented coating, metricseries -Classification: 1 100 MPa (at ambient temperature) / 315 °C


Date: 18/07/2018 Page

I.S. EN 2346-002:20061445.

Aerospace series - Cable, electrical, fire resistant - Operating temperatures between -65 °C and 260 °C - Part 002: General


I.S. EN 2346-003:20061446.

Aerospace series - Cable, electrical, fire resistant - Operating temperatures between -65 °C and 260 °C - Part 003: DL family, single core - Product standard


I.S. EN 2346-004:20061447.

Aerospace series - Cable, electrical, fire resistant - Operating temperatures between -65 °C and 260 °C - Part 004: DN family, single UV laser printable and multicoreassembly - Light weight - Product standard


I.S. EN 4311:20061448.

Aerospace series - Studs, coarse tolerance reduced shank, medium length threads, inheat and corrosion resisting steel, MoS2 lubricated - Classification : 1 100 MPa (atambient temperature) / 315 °C


I.S. EN 4312:20061449.

Aerospace series - Studs, coarse tolerance reduced shank, medium length thread, inheat and corrosion resisting steel, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature) / 315 °C


I.S. EN 4494:20061450.

Aerospace series - Rings, split, in stainless steel


I.S. EN 3155-024:20061451.

Aerospace series - Electrical contacts used in elements of connection - Part 024:Contacts, electrical, triaxial, size 8, male, type D, crimp, class S - Product standard


I.S. EN 3155-025:20061452.

Aerospace series - Electrical contacts used in elements of connection - Part 025:Contacts, electrical, triaxial, size 8, female, type D, crimp, class S - Product standard


I.S. EN 3475-501:20061453.

Aerospace series - Cables, electrical, aircraft use - Test methods - Part 501: Dynamiccut-through


I.S. EN 4041:20061454.

Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in corrosionresisting steel, with extended inner ring and flanged alignment bush - Dimensions andloads


I.S. EN 4198:20061455.

Aerospace series - Rod-ends, adjustable self-aligning plain bearing with self-lubricatingliner and threaded shank in corrosion resisting steel - Dimensions and loads


I.S. EN 4424:20061456.

Aerospace series - Rod-ends, adjustable, single fork and threaded shank withengagement: 1,5 ˙ thread diameter in titanium alloys - Dimensions and loads


Date: 18/07/2018 Page

I.S. EN 4425:20061457.

Aerospace series - Washers, tab in corrosion resisting steel for flight control rods -Dimensions


I.S. EN ISO 8871-4:20061458.

Elastomeric parts for parenterals and for devices for pharmaceutical use - Part 4:Biological requirements and test methods (ISO 8871-4:2006)


I.S. CEN TR 15371:20061459.

Safety of toys - Replies to requests for interpretation of EN 71-1, EN 71-2, and EN 71-8


I.S. EN 54-20:20061460.

Fire detection and fire alarm systems - Part 20: Aspirating smoke detectors


I.S. EN ISO 18276:20061461.

Welding consumables - Tubular cored electrodes for gasshielded and non-gas-shieldedmetal arc welding of highstrength steels - Classification (ISO 18276:2005)


I.S. EN ISO 9455-17:20061462.

Soft soldering fluxes - Test methods - Part 17: Surface insulation resistance comb testand electrochemical migration test of flux residues (ISO 9455-17:2002)


I.S. EN 539-2:20061463.

Clay roofing tiles for discontinuous laying - Determination of physical characteristics -Part 2: Test for frost resistance


I.S. EN 490:2005/A1:20061464.

Concrete roofing tiles and fittings for roof covering and wall cladding - Productspecifications


I.S. EN 14935:20061465.

Copper and copper alloys - Determination of impurities in pure copper - ET AAS method


I.S. EN 14936-1:20061466.

Copper and copper alloys - Determination of aluminium content - Part 1: Titrimetricmethod


I.S. EN 14936-2:20061467.

Copper and copper alloys - Determination of aluminium content - Part 2: FAAS method


I.S. EN 14937-1:20061468.

Copper and copper alloys - Determination of antimony content - Part 1:Spectrophotometric method


I.S. EN 14937-2:20061469.

Copper and copper alloys - Determination of antimony content - Part 2: FAAS method


I.S. EN 14939:20061470.

Copper and copper alloys - Determination of beryllium content - FAAS method


Date: 18/07/2018 Page

I.S. EN 14940-2:20061471.

Copper and copper alloys - Determination of chromium content - Part 2: FAAS method


I.S. EN 14941:20061472.

Copper and copper alloys - Determination of cobalt content FAAS method


I.S. EN 14942-2:20061473.

Copper and copper alloys - Determination of arsenic content - Part 2: FAAS method


I.S. EN 14977:20061474.

Copper and copper alloys - Detection of tensile stress - 5 % ammonia test


I.S. CEN TS 15398:20061475.

Resilient, textile and laminate floor coverings - Floor covering standard symbols


I.S. EN 957-4:20061476.

Stationary training equipment - Part 4: Strength training benches, additional specificsafety requirements and test methods


I.S. EN ISO 12137-1:20061477.

Paints and varnishes - Determination of mar resistance - Part 1: Method using a curvedstylus (ISO 12137-1:1997, including Technical Corrigendum 1:1998)


I.S. EN ISO 12137-2:20061478.

Paints and varnishes - Determination of mar resistance - Part 2: Method using a pointedstylus (ISO 12137-2:1997)


I.S. EN ISO 15710:20061479.

Paints and varnishes - Corrosion testing by alternate immersion in and removal from abuffered sodium chloride solution (ISO 15710:2002)


I.S. EN ISO 2884-1:20061480.

Paints and varnishes - Determination of viscosity using rotary viscometers - Part 1:Cone-and-plate viscometer operated at a high rate of shear (ISO 2884-1:1999)


I.S. EN ISO 2884-2:20061481.

Paints and varnishes - Determination of viscosity using rotary viscometers - Part 2: Discor ball viscometer operated at a specified speed (ISO 2884-2:2003)


I.S. EN 1859:2000/A1:20061482.

Chimneys - Metal chimneys - Test methods


I.S. EN ISO 8895:20061483.

Shaped insulating refractory products - Determination of cold crushing strength (ISO8895:2004)


I.S. EN 14257:20061484.

Adhesives - Wood adhesives - Determination of tensile strength of lap joints at elevatedtemperature (WATT '91)


Date: 18/07/2018 Page

I.S. EN 301:20061485.

Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classificationand performance requirements


I.S. EN ISO 13445:20061486.

Adhesives - Determination of shear strength of adhesive bonds between rigid substratesby the block-shear method (ISO 13445:2003)


I.S. EN ISO 21969:20061487.

High-pressure flexible connections for use with medical gas systems (ISO 21969:2005)


I.S. EN ISO 19054:20061488.

Rail systems for supporting medical equipment (ISO 19054:2005)


I.S. EN 13041:1999/A1:20061489.

Soil improvers and growing media - Determination of physical properties - Dry bulkdensity, air volume, water volume, shrinkage value and total pore space


I.S. CEN TS 15173:20061490.

Gas supply systems - Frame of reference regarding Pipeline Integrity ManagementSystem (PIMS)


I.S. EN 14465:2003/A1:20061491.

Textiles - Upholstery fabrics - Specification and methods of test


I.S. EN 1890:20061492.

Surface active agents - Determination of cloud point of non-ionic surface active agentsobtained by condensation of ethylene oxide


I.S. CEN ISO TS 14907-2:20061493.

Road transport and traffic telematics - Electronic fee collection - Test procedures foruser and fixed equipment - Part 2: Conformance test for the onboard unit applicationinterface(ISO/TS 14907-2:2006)


I.S. EN 1442:20061494.

LPG equipment and accessories - Transportable refillable welded steel cylinders forLPG - Design and construction


I.S. EN ISO 19119:20061495.

Geographic information - Services (ISO 19119:2005)


I.S. EN ISO 17228:20061496.

Leather - Tests for colour fastness - Change in colour with accelerated ageing (ISO17228:2005)


I.S. EN 2435-001:20061497.

Aerospace series - Paints and varnishes - Corrosion resistant chromated twocomponent cold curing primer - Part 001: Minimum requirements


Date: 18/07/2018 Page

I.S. EN 2436-001:20061498.

Aerospace series - Paints and varnishes - Corrosion resistant chromate-free twocomponent cold curing primer - Part 001: Basic requirements


I.S. EN 2434-005:20061499.

Aerospace series - Paints and varnishes - Two component cold curing polyurethanefinish - Part 005: High flexibility and chemical agent resistance for military application


I.S. EN 2435-002:20061500.

Aerospace series - Paints and varnishes - Corrosion resistant chromated twocomponent cold curing primer - Part 002: High corrosion resistance


I.S. EN 2647:20061501.

Aerospace series - Nuts, hexagonal, self-locking, ball seat, in alloy steel, cadmiumplated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature)/235 °C


I.S. EN 2435-003:20061502.

Aerospace series - Paints and varnishes - Corrosion resistant chromated twocomponent cold curing primer - Part 003: High corrosion and fluid resistance


I.S. EN 2435-004:20061503.

Aerospace series - Paints and varnishes - Corrosion resistant chromated twocomponent cold curing primer - Part 004: High corrosion and fluid resistance withsurface preparation tolerance


I.S. EN 2435-005:20061504.

Aerospace series - Paints and varnishes - Corrosion resistant chromated twocomponent cold curing primer - Part 005: High corrosion resistance for militaryapplication


I.S. EN 2436-003:20061505.

Aerospace series - Paints and varnishes - Corrosion resistant chromate-free twocomponent cold curing primer - Part 003: High corrosion and fluid resistance


I.S. EN 60068-2-21:20061506.

Environmental testing -- Part 2-21: Tests - Test U: Robustness of terminations andintegral mounting devices (IEC 60068-2-21:2006 (EQV))


I.S. EN 60127-1:20061507.

Miniature fuses -- Part 1: Definitions for miniature fuses and general requirements forminiature fuse-links (IEC 60127-1:2006 (EQV))


I.S. EN 60371-3-1:20061508.

Specification for insulating materials based on mica -- Part 3: Specifications forindividual materials -- Sheet 1: Commutator separators and materials (IEC 60371-3-1:2006 (EQV))


Date: 18/07/2018 Page

I.S. EN 60819-3-3:20061509.

Non-cellulosic papers for electrical purposes -- Part 3: Specifications for individualmaterials -- Sheet 3: Unfilled aramid (aromatic polyamide) papers (IEC 60819-3-3:2006(EQV))


I.S. EN 61076-7-100:20061510.

Connectors for electronic equipment - Product requirements -- Part 7-100: Cable outletaccessories - Detail specification for a metric cable sealing consisting of an integratedpart of heavy-duty rectangular or circular connector hoods and a sealing system (IEC61076-7-100:2006 (EQV))


I.S. EN 61290-5-1:20061511.

Optical amplifiers - Test methods -- Part 5-1: Reflectance parameters - Optical spectrumanalyzer method (IEC 61290-5-1:2006 (EQV))


I.S. EN 50121-1:20061512.

Railway applications - Electromagnetic compatibility -- Part 1: General


I.S. EN 50121-2:20061513.

Railway applications - Electromagnetic compatibility -- Part 2: Emission of the wholerailway system to the outside world


I.S. EN 50121-3-1:20061514.

Railway applications - Electromagnetic compatibility -- Part 3-1: Rolling stock - Train andcomplete vehicle


I.S. EN 50121-3-2:20061515.

Railway applications - Electromagnetic compatibility -- Part 3-2: Rolling stock -Apparatus


I.S. EN 50121-4:20061516.

Railway applications - Electromagnetic compatibility -- Part 4: Emission and immunity ofthe signalling and telecommunications apparatus


I.S. EN 50121-5:20061517.

Railway applications - Electromagnetic compatibility -- Part 5: Emission and immunity offixed power supply installations and apparatus


I.S. EN 60079-0:20061518.

Electrical apparatus for explosive gas atmospheres -- Part 0: General requirements (IEC60079-0:2004 (MOD))


I.S. EN 60793-1-49:20061519.

Optical fibres -- Part 1-49: Measurement methods and test procedures - Differentialmode delay (IEC 60793-1-49:2006 (EQV))


I.S. EN 62013-1:20061520.

Caplights for use in mines susceptible to firedamp -- Part 1: General requirements -Construction and testing in relation to the risk of explosion (IEC 62013-1:2005 (EQV))


Date: 18/07/2018 Page

I.S. EN 62013-2:20061521.

Caplights for use in mines susceptible to firedamp -- Part 2: Performance and othersafety-related matters (IEC 62013-2:2005 (EQV))


I.S. EN 62271-101:20061522.

High-voltage switchgear and controlgear -- Part 101: Synthetic testing (IEC 62271-101:2006 (EQV))


I.S. HD 361 S3:1999/A1:20061523.

System for cable designation


I.S. CLC TR 50404:20061524.

Electrostatics - Code of practice for the avoidance of hazards due to static electricity


S.R. 18:20061525.

Guidance on the use of I.S. EN 13139:2002 - Aggregates for mortar


I.S. EN 1390:20061526.

Wood preservatives - Determination of the eradicant action against Hylotrupes bajulus(Linnaeus) larvae - Laboratory method


I.S. EN 203-2-2:20061527.

Gas heated catering equipment - Part 2-2: Specific requirements - Ovens


I.S. EN 203-2-11:20061528.

Gas heated catering equipment - Part 2-11: Specific requirements - Pasta cookers


I.S. EN 13203-2:20061529.

Gas-fired domestic appliances producing hot water - Appliances not exceeding 70 kWheat input and 300 l water storage capacity - Part 2: Assessment of energy consumption


I.S. EN 15057:20061530.

Fibre cement profiled sheets - Impact resistance test method


I.S. EN 14978:20061531.

Laminate floor coverings - Elements with acrylic based surface layer, electron beamcured - Specifications, requirements and test methods


I.S. EN 14974:20061532.

Facilities for users of roller sports equipment - Safety requirements and test methods


I.S. EN 13035-5:20061533.

Machines and plants for the manufacture, treatment and processing of flat glass - Safetyrequirements - Part 5: Machines and installations for stacking and de-stacking


I.S. EN 13035-6:20061534.

Machines and plants for the manufacture, treatment and processing of flat glass - Safetyrequirements - Part 6: Machines for break-out


Date: 18/07/2018 Page

I.S. EN 13035-7:20061535.

Machines and plants for the manufacture, treatment and processing of flat glass - Safetyrequirements - Part 7: Cutting machines for laminated glass


I.S. EN 13035-11:20061536.

Machines and plants for the manufacture, treatment and processing of flat glass - Safetyrequirements - Part 11: Drilling machines


I.S. CEN TS 14632:20061537.

Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure - Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP)-Guidance for the assessment of conformity


I.S. EN 960:20061538.

Headforms for use in the testing of protective helmets


I.S. EN 1149-1:20061539.

Protective clothing - Electrostatic properties - Part 1: Test method for measurement ofsurface resistivity


I.S. EN 725-11:20061540.

Advanced technical ceramics - Methods of test for ceramic powders - Part 11:Determination of densification on natural sintering


I.S. EN 14671:20061541.

Characterization of sludges - Pre-treatment for the determination of extractableammonia using 2 mol/l potassium chloride


I.S. EN 14701-2:20061542.

Characterization of sludges - Filtration properties - Part 2: Determination of the specificresistance to filtration


I.S. EN 14701-3:20061543.

Characterization of sludges - Filtration properties - Part 3: Determination of thecompressibility


I.S. EN 10143:20061544.

Continuously hot-dip coated steel sheet and strip - Tolerances on dimensions and shape


I.S. CWA 15556-1:20061545.

Product Description and Classification - Part 1:New Property Library


I.S. CWA 15556-2:20061546.

Product Description and Classification - Part 2: Product Classes with sets of properties


Date: 18/07/2018 Page

I.S. CWA 15556-3:20061547.

Product Description and Classification - Part 3: Results of development in harmonizationof product classifications and in multilingual electronic catalogues and their respectivedatamodelling


I.S. EN ISO 13503-5:20061548.

Petroleum and natural gas industries - Completion fluids and materials - Part 5:Procedures for measuring the long-term conductivity of proppants (ISO 13503-5:2006)


I.S. EN 54-7:2000/A2:20061549.

Fire detection and fire alarm systems - Part 7: Smoke detectors - Point detectors usingscattered light, transmitted light or ionization


I.S. EN ISO 11138-1:20061550.

Sterilization of health care products - Biological indicators - Part 1: General requirements(ISO 11138-1:2006)


I.S. EN ISO 11138-5:20061551.

Sterilization of health care products - Biological indicators - Part 5: Biological indicatorsfor low-temperature steam and formaldehyde sterilization processes (ISO 11138-5:2006)


I.S. EN ISO 11138-4:20061552.

Sterilization of health care products - Biological indicators - Part 4: Biological indicatorsfor dry heat sterilization processes (ISO 11138-4:2006)


I.S. EN 13203-1:20061553.

Gas-fired domestic appliances producing hot water - Appliances not exceding 70 kWheat input and 300 l water storage capacity - Part 1: Assessment of performance of hotwater deliveries


I.S. EN 656:1999/A1:20061554.

Gas-fired central heating boilers - Type B boilers of nominal heat input exceeding 70kW, but not exceeding 300 kW


I.S. EN 15417:20061555.

Gas-fired central heating boilers - Specific requirements for condensing boilers with anominal heat input greater than 70 kW but not exceeding 1000 kW


I.S. EN 300:20061556.

Oriented Strand Boards (OSB) - Definitions, classification and specifications


I.S. EN 622-5:20061557.

Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF)


I.S. EN ISO 22825:20061558.

Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austeniticsteels and nickel-based alloys (ISO 22825:2006)


Date: 18/07/2018 Page

I.S. CEN TS 15447:20061559.

Mounting and fixing in reaction to fire tests under the Construction Products Directive


I.S. CEN ISO TR 25108:20061560.

Non-destructive testing - Guidelines for NDT personnel training organizations (ISO/TR25108:2006)


I.S. EN ISO 8502-6:20061561.

Preparation of steel substrates before application of paints and related products - Testsfor the assessment of surface cleanliness - Part 6: Extraction of soluble contaminants foranalysis - The Bresle method (ISO 8502-6:2006)


I.S. EN 13035-9:20061562.

Machines and plants for the manufacture, treatment and processing of flat glass - Safetyrequirements - Part 9: Washing installations


I.S. EN 12897:20061563.

Water supply - Specification for indirectly heated unvented (closed) storage waterheaters


I.S. EN 15041:20061564.

Chemicals used for treatment of water intended for human consumption - Antiscalantsfor membranes - Polyphosphates


I.S. EN 15040:20061565.

Chemicals used for treatment of water intended for human consumption - Antiscalantsfor membranes - Phosphonic acids and salts


I.S. EN 15039:20061566.

Chemicals used for treatment of water intended for human consumption - Antiscalantsfor membranes - Polycarboxilic acids and salts


I.S. EN 15032:20061567.

Chemicals used for treatment of swimming pool water - Trichloroisocyanuric acid


I.S. EN 15072:20061568.

Chemicals used for treatment of swimming pool water - Sodium dichloroisocyanurate,anhydrous


I.S. EN 15073:20061569.

Chemicals used for treatment of swimming pool water - Sodium dichloroisocyanurate,dihydrate


I.S. EN 15075:20061570.

Chemicals used for treatment of swimming pool water - Sodium hydrogen carbonate


I.S. EN 15076:20061571.

Chemicals used for treatment of swimming pool water - Sodium hydroxide


Date: 18/07/2018 Page

I.S. EN 15077:20061572.

Chemicals used for treatment of swimming pool water - Sodium hypochlorite


I.S. EN 14801:20061573.

Conditions for pressure classification of products for water and wastewater pipelines


I.S. EN 14276-1:20061574.

Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels -General requirements


I.S. EN 14844:20061575.

Precast concrete products - Box culverts


I.S. EN ISO 9509:20061576.

Water quality - Toxicity test for assessing the inhibition of nitrification of activated sludgemicroorganisms (ISO 9509:2006)


I.S. CEN TS 15174:20061577.

Gas supply systems - Guideline for safety management systems for natural gastransmission pipelines


I.S. EN 1998-4:20061578.

Eurocode 8 - Design of structures for earthquake resistance Part 4: Silos, tanks andpipelines


I.S. EN ISO 9169:20061579.

Air quality - Definition and determination of performance characteristics of an automaticmeasuring system (ISO 9169:2006)


I.S. EN ISO 19109:20061580.

Geographic information - Rules for application schema (ISO 19109:2005)


I.S. EN ISO 19110:20061581.

Geographic information - Methodology for feature cataloguing (ISO 19110:2005)


I.S. EN ISO 19117:20061582.

Geographic information - Portrayal (ISO 19117:2005)


I.S. EN ISO 19118:20061583.

Geographic information - Encoding (ISO 19118:2005)


I.S. EN ISO 14978:20061584.

Geometrical Product Specifications (GPS) - General concepts and requirements forGPS measuring equipment (ISO 14978:2006)


I.S. CEN TR 14742:20061585.

Characterization of sludges - Laboratory chemical conditioning procedure


Date: 18/07/2018 Page

I.S. CEN TR 15252:20061586.

Characterization of sludges - Protocol for validating methods for physical properties ofsludges


I.S. EN 3155-002:20061587.

Aerospace series - Electrical contacts used in elements of connection - Part 002: Listand utilization of contacts


I.S. EN 3155-009:20061588.

Aerospace series - Electrical contacts used in elements of connection - Part 009:Contacts, electrical, female, type A, crimp, class S - Product standard


I.S. EN 3155-012:20061589.

Aerospace series - Electrical contacts used in elements of connection - Part 012:Contacts, electrical, triaxial, size 8, male, type D, solder, class R - Product standard


I.S. EN 3155-013:20061590.

Aerospace series - Electrical contacts used in elements of connection - Part 013:Contacts, electrical, triaxial, size 8, female, type D, solder, class R - Product standard


I.S. EN 3155-022:20061591.

Aerospace series - Electrical contacts used in elements of connection - Part 022:Contacts, electrical rectangular, male, type A, crimp, class R - Product standard


I.S. EN 3155-017:20061592.

Aerospace series - Electrical contacts used in elements of connection - Part 017:Contacts, electrical, relay base, female, type A, crimp, class P - Product standard


I.S. EN 3155-054:20061593.

Aerospace series - Electrical contacts used in elements of connection - Part 054:Contacts, electrical, male thermocouple NiAl, type C, crimp, class T - Product standard


I.S. EN 3155-055:20061594.

Aerospace series - Electrical contacts used in elements of connection - Part 055:Contacts, electrical, female, thermocouple NiAl, type C, crimp, class T - Productstandard


I.S. EN 3155-056:20061595.

Aerospace series - Electrical contacts used in elements of connection - Part 056:Contacts, electrical, male, thermocouple NiCr, type C, crimp, class T - Product standard


I.S. EN 3155-057:20061596.

Aerospace series - Electrical contacts used in elements of connection - Part 057:Contacts, electrical, female, thermocouple NiCr, type C, crimp, class T- Productstandard


I.S. EN 3155-058:20061597.

Aerospace series - Electrical contacts used in elements of connection - Part 058:Contacts, electrical, coaxial, size 16, male, type D, solder, class R Product standard


Date: 18/07/2018 Page

I.S. CEN GUIDE 12:20061598.

Child Safety Guidance for its Inclusion in Standards


I.S. EN ISO 14040:20061599.

Environmental management - Life cycle assessment - Principles and framework (ISO14040:2006)


I.S. EN ISO 14044:20061600.

Environmental management - Life cycle assessment - Requirements and guidelines(ISO 14044:2006)


I.S. EN ISO 14556:2000/A1:20061601.

Steel - Charpy V-notch pendulum impact test - Instrumented test method - Amendment1: Annex D - Instrumented Charpy Vnotch pendulum impact test of sub-size test pieces(ISO 14556:2000/Amd 1:2006)


I.S. EN 13322-2:2003/A1:20061602.

Transportable gas cylinders - Refillable welded steel gas cylinders - Design andconstruction - Part 2: Stainless steel

1 SEPTEMBER 2006Date published

I.S. EN ISO 9333:20061603.

Dentistry - Brazing materials (ISO 9333:2006)


I.S. CEN ISO TR 25107:20061604.

Non-destructive testing - Guidelines for NDT training syllabuses (ISO/TR 25107:2006)


I.S. EN ISO 9227:20061605.

Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2006)


I.S. EN ISO 11998:20061606.

Paints and varnishes - Determination of wet-scrub resistance and cleanability ofcoatings (ISO 11998:2006)


I.S. EN ISO 11681-2:20061607.

Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2:Chain-saws for tree service (ISO 11681-2:2006)


I.S. EN 415-7:20061608.

Safety of packaging machines - Part 7: Group and secondary packaging machines


I.S. EN 1097-2:1998/A1:20061609.

Tests for mechanical and physical properties of aggregates - Part 2: Methods for thedetermination of resistance to fragmentation


I.S. EN ISO 11979-8:20061610.

Ophthalmic implants - Intraocular lenses - Part 8: Fundamental requirements (ISO11979-8:2006)


Date: 18/07/2018 Page

I.S. EN ISO 11979-1:20061611.

Ophthalmic implants - Intraocular lenses - Part 1: Vocabulary (ISO 11979-1:2006)


I.S. EN ISO 10993-2:20061612.

Biological evaluation of medical devices - Part 2: Animal welfare requirements (ISO10993-2:2006)


I.S. EN 1729-1:20061613.

Furniture - Chairs and tables for educational institutions - Part 1: Functional dimensions


I.S. EN 1729-2:20061614.

Furniture - Chairs and tables for educational institutions - Part 2: Safety requirementsand test methods


I.S. EN ISO 17201-2:20061615.

Acoustics - Noise from shooting ranges - Part 2: Estimation of muzzle blast andprojectile sound by calculation (ISO 17201-2:2006)


I.S. EN ISO 8033:20061616.

Rubber and plastics hoses - Determination of adhesion between components (ISO8033:2006)


I.S. EN ISO 105-E05:20061617.

Textiles - Tests for colour fastness - Part E05: Colour fastness to spotting: Acid (ISO105-E05:2006)


I.S. EN ISO 105-E06:20061618.

Textiles - Tests for colour fastness - Part E06: Colour fastness to spotting: Alkali (ISO105-E06:2006)


I.S. EN 15159-1:20061619.

Vitreous and porcelain enamels - Glass lined apparatus for process plants - Part 1:Quality requirements for apparatus, components, appliances and accessories


I.S. EN 15159-2:20061620.

Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 2:Designation and specification of resistance to chemical attack and thermal shock


I.S. EN 15159-3:20061621.

Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 3:Thermal shock resistance


I.S. EN 14893:20061622.

LPG equipment and accessories - Transportable Liquefied Petroleum Gas (LPG)welded steel pressure drums with a capacity between 150 litres and 1 000 litres


Date: 18/07/2018 Page

I.S. EN 3444:20061623.

Aerospace series - Bolt, large bihexagonal head, close tolerance normal shank, mediumlength thread, in heat resisting nickel base alloy, passivated - Classification: 1 250 MPa(at ambient temperature) / 650 °C


I.S. EN 3536:20061624.

Aerospace series - Nuts, hexagon, self-locking, in heat resisting, MoS2 lubricated -Classification: 1 100 MPa (at ambient temperature)/315 °C


I.S. EN 3682-001:20061625.

Aerospace series - Connectors, plug and receptacle, electrical, rectangular,interchangeable insert type, rack to panel, operating temperature 150 °C continuous -Part 001: Technical specification


I.S. EN 3626:20061626.

Aerospace series - Nuts, hexagon, self-locking in steel, cadmium plated, MoS2lubricated - Classification: 1 100 MPa (at ambient temperature)/235 °C


I.S. EN 2713-002:20061627.

Aerospace series - Cables, electrical, single and multicore for general purpose -Operating temperatures between - 55 °C and 200 °C - Part 002: Screened and jacketed- General


I.S. EN 2713-011:20061628.

Aerospace series - Cables, electrical, single and multicore for general purpose -Operating temperatures between - 55 °C and 200 °C - Part 011: Silver plated copperscreened (spiral) andjacketed, UV laser printable - Product standard


I.S. EN 3545-005:20061629.

Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear,plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 005:Male coding and attachment System for mounting on free housing (plug) - Productstandard


I.S. EN 3545-006:20061630.

Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear,plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 006:Male coding and attachment System for mounting on fixed housing (receptacle) -Product standard


I.S. EN 3155-060:20061631.

Aerospace series - Electrical contacts used in elements of connection - Part 060:Contacts, electrical, coaxial, size 12, male, type D, solder, class R Product standard


I.S. EN 3155-061:20061632.

Aerospace series - Electrical contacts used in elements of connection - Part 061:Contacts, electrical, coaxial, size 12, female, type D, solder, class R Product standard


Date: 18/07/2018 Page

I.S. EN 3155-065:20061633.

Aerospace series - Electrical contacts used in elements of connection - Part 065:Contacts, electrical, male, type A, crimp, class S, size 8 Product standard


I.S. EN 3155-066:20061634.

Aerospace series - Electrical contacts used in elements of connection - Part 066:Contacts, electrical, female, type A, crimp, class S, size 8 - Product standard


I.S. EN 4008-001:20061635.

Aerospace series - Elements of electrical and optical connection - Crimping tools andassociated accessories - Part 001: Technical specification


I.S. EN 4008-002:20061636.

Aerospace series - Elements of electrical and optical connection - Crimping tools andassociated accessories - Part 002: List of product standards


I.S. EN 3682-002:20061637.

Aerospace series - Connectors, plug and receptacle, electrical, rectangular,interchangeable insert type, rack to panel, operating temperature 150 °C continuous -Part 002: Specification of performance and contact arrangements


I.S. EN 3682-003:20061638.

Aerospace series - Fibre optic systems - Handbook - Part 003: Looming and installationpractices


I.S. EN 2713-005:20061639.

Aerospace series - Cables, electrical, single and multicore for general purpose -Operating temperatures between - 55 °C and 200 °C - Part 005: Screened (spiral) andjacketed, CO2 laser printable - Product standard


I.S. EN 2713-009:20061640.

Aerospace series - Cables, electrical, single and multicore for general purpose -Operating temperatures between - 55 °C and 200 °C - Part 009: Screened (spiral) andjacketed, YAG X3 laser printable - Product standard


I.S. EN 2714-005:20061641.

Aerospace series - Cables, electrical, single and multicore for general purpose -Operating temperatures between - 55 °C and 260 °C - Part 005: Screened (spiral) andjacketed, CO2 laser printable - Product standard


I.S. EN 4533-001:20061642.

Aerospace series - Fibre optic systems - Handbook - Part 001: Termination methodsand tools


I.S. EN 4533-002:20061643.

Aerospace series - Fibre optic systems - Handbook - Part 002: Test and measurement


I.S. EN 4533-003:20061644.

Aerospace series - Fibre optic systems - Handbook - Part 003: Looming and installationpractices


Date: 18/07/2018 Page

I.S. EN 4533-004:20061645.

Aerospace series - Fibre optic systems - Handbook - Part 004: Repair, maintenance andinspection


I.S. EN 4604-001:20061646.

Aerospace series - Cable, electrical, for signal transmission - Part 001: Technicalspecification


I.S. EN 4604-002:20061647.

Aerospace series - Cable, electrical, for signal transmission - Part 002: General


I.S. EN 10131:20061648.

Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and highyield strength steel flat products for cold forming - Tolerances on dimensions and shape


I.S. EN 10140:20061649.

Cold rolled narrow steel strip - Tolerances on dimensions and shape


I.S. CWA 15557:20061650.

Scenarios and XML Templates for B2B in the Textile Clothing Manufacturing and retail


I.S. EN 60384-24:20061651.

Fixed capacitors for use in electronic equipment -- Part 24: Sectional specification -Surface mount fixed tantalum electrolytic capacitors with conductive polymer solidelectrolyte (IEC 60384-24:2006 (EQV))


I.S. EN 60384-24-1:20061652.

Fixed capacitors for use in electronic equipment -- Part 24-1: Blank detail specification -Surface mount fixed tantalum electrolytic capacitors with conductive polymer solidelectrolyte - Assessment level EZ (IEC 60384-24-1:2006 (EQV))


I.S. EN 60384-25:20061653.

Fixed capacitors for use in electronic equipment -- Part 25: Sectional specification -Surface mount fixed aluminium electrolytic capacitors with conductive polymer solidelectrolyte (IEC 60384-25:2006 (EQV))


I.S. EN 60384-25-1:20061654.

Fixed capacitors for use in electronic equipment -- Part 25-1: Blank detail specification -Surface mount fixed aluminium electrolytic capacitors with conductive polymer solidelectrolyte - Assessment level EZ (IEC 60384-25-1:2006 (EQV))


I.S. EN 60706-3:20061655.

Maintainability of equipment -- Part 3: Verification and collection, analysis andpresentation of data (IEC 60706-3:2006 (EQV))


I.S. EN 60947-2:20061656.

Low-voltage switchgear and controlgear -- Part 2: Circuit-breakers (IEC 60947-2:2006(EQV))


Date: 18/07/2018 Page

I.S. EN 61165:20061657.

Application of Markov techniques (IEC 61165:2006 (EQV))


I.S. EN 61347-2-13:20061658.

Lamp controlgear -- Part 2-13: Particular requirements for d.c. or a.c. supplied electroniccontrolgear for LED modules (IEC 61347-2-13:2006 (EQV))


I.S. EN 61347-2-9:2001/A2:20061659.

Lamp controlgear -- Part 2-9: Particular requirements for ballasts for discharge lamps(excluding fluorescent lamps) (IEC 61347-2-9:2000/A2:2006 (EQV))


I.S. EN 62209-1:20061660.

Human exposure to radio frequency fields from hand-held and body-mounted wirelesscommunication devices - Human models, instrumentation, and procedures -- Part 1:Procedure to determine the specific absorption rate (SAR) for hand-held devices used inclose proximity to the ear (frequency range of 300 MHz to 3 GHz) (IEC 62209-1:2005


I.S. HD 60364-4-443:20061661.

Electrical installations of buildings -- Part 4-44: Protection for safety - Protection againstvoltage disturbances and electromagnetic disturbances -- Clause 443: Protectionagainst overvoltages of atmospheric origin or due to switching (IEC 60364-4-44:2001/A1:2003 (MOD))


I.S. CLC TS 61643-12:20061662.

Low-voltage surge protective devices -- Part 12: Surge protective devices connected tolow-voltage power systems - Selection and application principles (IEC 61643-12:2002(MOD))


I.S. EN 60068-2-54:20061663.

Environmental testing -- Part 2-54: Tests - Test Ta: Solderability testing of electroniccomponents by the wetting balance method (IEC 60068-2-54:2006 (EQV))


I.S. EN 60099-4:2004/A1:20061664.

Surge arresters -- Part 4: Metal-oxide surge arresters without gaps for a.c. systems (IEC60099-4:2004/A1:2006 (EQV))


I.S. EN 60598-2-13:20061665.

Luminaires -- Part 2-13: Particular requirements - Ground recessed luminaires (IEC60598-2-13:2006 (EQV))


I.S. EN 60898-2:20061666.

Electrical accessories - Circuit-breakers for overcurrent protection for household andsimilar installations -- Part 2: Circuit-breakers for a.c. and d.c. operation (IEC 60898-2:2000 (MOD) + A1:2003 (MOD))


I.S. EN 60923:2005/A1:20061667.

Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps)- Performance requirements (IEC 60923:2005/A1:2006 (EQV))


Date: 18/07/2018 Page

I.S. EN 61140:2002/A1:20061668.

Protection against electric shock - Common aspects for installation and equipment (IEC61140:2001/A1:2004 (MOD))


I.S. EN 61788-3:20061669.

Superconductivity -- Part 3: Critical current measurement - DC critical current of Ag-and/or Ag alloy-sheathed Bi-2212 and Bi-2223 oxide superconductors (IEC 61788-3:2006 (EQV))


I.S. EN 62314:20061670.

Solid-state relays (IEC 62314:2006 (EQV))


I.S. EN 62373:20061671.

Bias-temperature stability test for metal-oxide, semiconductor, field-effect transistors(MOSFET) (IEC 62373:2006 (EQV))


I.S. HD 60364-7-740:20061672.

Electrical installations of buildings -- Part 7-740: Requirements for special installations orlocations - Temporary electrical installations for structures, amusement devices andbooths at fairgrounds, amusement parks and circuses (IEC 60364-7-740:2000 (MOD))


I.S. EN 61755-2-1:20061673.

Fibre optic connector optical interfaces -- Part 2-1: Optical interface standard singlemode non-angled physically contacting fibres (IEC 61755-2-1:2006 (EQV))


I.S. EN 62153-4-7:20061674.

Metallic communication cables test methods -- Part 4-7: Electromagnetic compatibility(EMC) - Test method for measuring the transfer impedance and the screening - or thecoupling attenuation - Tube in tube method (IEC 62153-4-7:2006 (EQV))


I.S. EN 61326-2-3:20061675.

Electrical equipment for measurement, control and laboratory use - EMC requirements --Part 2-3: Particular requirements - Test configuration, operational conditions andperformance criteria for transducers with integrated or remote signal conditioning (IEC61326-2-3:2006 (EQV))


I.S. EN 61300-2-46:20061676.

Fibre optic interconnecting devices and passive components - Basic test andmeasurement procedures -- Part 2-46: Tests - Damp heat cyclic (IEC 61300-2-46:2006(EQV))


I.S. EN 61189-6:20061677.

Test methods for electrical materials, interconnection structures and assemblies -- Part6: Test methods for materials used in manufacturing electronic assemblies (IEC 61189-6:2006 (EQV))


I.S. EN 61010-2-020:20061678.

Safety requirements for electrical equipment for measurement, control, and laboratoryuse -- Part 2-020: Particular requirements for laboratory centrifuges (IEC 61010-2-020:2006 (EQV))


Date: 18/07/2018 Page

I.S. EN 60749-39:20061679.

Semiconductor devices - Mechanical and climatic test methods -- Part 39: Measurementof moisture diffusivity and water solubility in organic materials used for semiconductorcomponents (IEC 60749-39:2006 (EQV))


I.S. EN 60749-27:20061680.

Semiconductor devices - Mechanical and climatic test methods -- Part 27: Electrostaticdischarge (ESD) sensitivity testing - Machine model (MM) (IEC 60749-27:2006 (EQV))


I.S. EN 60749-26:20061681.

Semiconductor devices - Mechanical and climatic test methods -- Part 26: Electrostaticdischarge (ESD) sensitivity testing - Human body model (HBM) (IEC 60749-26:2006(EQV))


I.S. EN 50338:20061682.

Safety of household and similar electrical appliances - Particular requirements forpedestrian-controlled battery powered electrical lawn mowers


I.S. EN 50164-3:20061683.

Lightning Protection Components (LPC) -- Part 3: Requirements for isolating spark gaps


I.S. EN 50164-1:1999/A1:20061684.

Lightning Protection Components (LPC) -- Part 1: Requirements for connectioncomponents


I.S. EN 50164-2:2002/A1:20061685.

Lightning protection components (LPC) -- Part 2: Requirements for conductors and earthelectrodes


I.S. EN ISO 13628-2:20061686.

Petroleum and natural gas industries - Design and operation of subsea productionsystems - Part 2: Unbonded flexible pipe systems for subsea and marine applications(ISO 13628-2:2006)


I.S. EN ISO 21671:20061687.

Dentistry - Rotary polishers (ISO 21671:2006)


I.S. EN ISO 11138-3:20061688.

Sterilization of health care products - Biological indicators - Part 3: Biological indicatorsfor moist heat sterilization processes (ISO 11138-3:2006)


I.S. EN ISO 11138-2:20061689.

Sterilization of health care products - Biological indicators - Part 2: Biological indicatorsfor ethylene oxide sterilization processes (ISO 11138-2:2006)


I.S. EN ISO 2867:20061690.

Earth-moving machinery - Access systems (ISO 2867:2006)


Date: 18/07/2018 Page

I.S. EN ISO 22610:20061691.

Surgical drapes, gowns and clean air suits, used as medical devices, for patients,clinical staff and equipment - Test method to determine the resistance to wet bacterialpenetration (ISO 22610:2006)


I.S. EN ISO 10993-4:2002/A1:20061692.

Biological evaluation of medical devices - Part 4: Selection of tests for interactions withblood - Amendment 1 (ISO 10993-4:2002/Amd 1:2006)


I.S. EN ISO 10993-10:2002/A1:20061693.

Biological evaluation of medical devices - Part 10: Tests for irritation and delayed-typehypersensitivity - Amendment 1 (ISO 10993-10:2002/Amd 1:2006)


I.S. EN 1991-1-7:20061694.

Eurocode 1 - Actions on structures - Part 1-7: General actions Accidental actions


I.S. EN 1991-3:20061695.

Eurocode 1 - Actions on structures - Part 3: Actions induced by cranes and machinery


I.S. EN 2882:20061696.

Aerospace series - Nuts, hexagonal, self-locking, with counterbore and captive washer,in steel, cadmium plated, MoS2 lubricated - Classification: 1 100 MPa (at ambienttemperature) / 235 °C


I.S. EN 4056-001:20061697.

Aerospace series - Cable ties for harnesses - Part 001: Technical specification


I.S. EN 4508:20061698.

Aerospace series - Paints and varnishes - Test method for anti-slip coatings -Determination of the sliding friction behaviour


I.S. EN 2859:20061699.

Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, shortthread, in alloy steel, cadmium plated, metric series - Classification: 1 100 MPa (atambienttemperature) / 235 °C


I.S. EN 2888:20061700.

Aerospace series - Metric Bolts, normal hexagon head, coarse tolerance normal shank,short thread, in corrosion resisting steel, passivated - Classification: 600 MPa (atambient temperature)/425 °C


I.S. EN 2889:20061701.

Aerospace series - Metric bolts, normal hexagon head, coarse tolerance normal shank,short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambienttemperature)/235 °C


I.S. EN 3079:20061702.

Aerospace series - Pipe coupling 8°30' up to 28 000 kPa - Adaptors - Metric series -Technical specification


Date: 18/07/2018 Page

I.S. EN 3080:20061703.

Aerospace series - Pipe coupling 8°30' in titanium alloy - Tees, reduced, branch withthrust wire nut


I.S. EN 3820:20061704.

Aerospace series - Metric bolts, normal hexagon head, coarse tolerance normal shank,short thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100 MPa (atambient temperature)/315 °C


I.S. EN 2436-002:20061705.

Aerospace series - Paints and varnishes - Corrosion resistant chromate-free twocomponent cold curing primer - Part 002: High corrosion resistance


I.S. EN 2436-004:20061706.

Aerospace series - Paints and varnishes - Corrosion resistant chromate-free twocomponent cold curing primer - Part 004: High corrosion and fluid resistance withsurface preparation tolerance


I.S. EN 2436-005:20061707.

Aerospace series - Paints and varnishes - Corrosion resistant chromate-free twocomponent cold curing primer - Part 005: For exterior use with surface preparationtolerance


I.S. EN 2436-006:20061708.

Aerospace series - Paints and varnishes - Corrosion resistant chromate-free twocomponent cold curing epoxy primer - Part 006: High corrosion resistance for militaryapplication


I.S. EN 4008-005:20061709.

Aerospace series - Elements of electrical and optical connection - Crimping tools andassociated accessories - Part 005: Positioner for crimping tool M22520/2-01 - Productstandard


I.S. EN 4008-006:20061710.

Aerospace series - Elements of electrical and optical connection - Crimping tools andassociated accessories - Part 006: Positioner for crimping tool M22520/7 - Productstandard


I.S. EN 4008-007:20061711.



I.S. EN 4008-008:20061712.



Date: 18/07/2018 Page

I.S. EN 4008-011:20061713.



I.S. EN 4008-012:20061714.



I.S. EN 4008-013:20061715.



I.S. EN 3682-004:20061716.

Aerospace series - Connectors, plug and receptacle, electrical, rectangular,interchangeable insert type, rack to panel, operating temperature 150 °C continuous -Part 004: Size 2 receptacle - Product standard


I.S. EN 3682-005:20061717.

Aerospace series - Connectors, plug and receptacle, electrical, rectangular,interchangeable insert type, rack to panel, operating temperature 150 °C continuous -Part 005: Size 2 plug - Product standard


I.S. EN 3682-006:20061718.



I.S. EN 3682-007:20061719.



I.S. EN 3682-008:20061720.



I.S. EN 3682-009:20061721.



I.S. EN 2591-420:20061722.

Aerospace series - Elements of electrical and optical connection - Test methods - Part420: Mechanical strength of rear accessories


Date: 18/07/2018 Page

I.S. EN ISO 8469:20061723.

Small craft - Non-fire-resistant fuel hoses (ISO 8469:2006)


I.S. EN 10315:20061724.

Routine method for analysis of high alloy steel by X-ray Fluorescence Spectrometry(XRF) by using a near by technique


I.S. CWA 15574:20061725.

Commission Recommendation 1994/820/EC October 1994, proposed revision with therequirements of Directive 2001/115/EC, present day e-Commerce practices and reviseddefinition of EDI Electronic Data Interchange


I.S. CWA 15575:20061726.

The list of invoice content details identified in the directive 2001/115/EC expressed asUN/CEFACT Core Components


I.S. CWA 15576:20061727.

Recommendation to allow coded identifiers as an alternative to the current unstructuredclear text identifications


I.S. CWA 15577:20061728.

A standardised set of codes with definitions to replace plain text clauses in eInvoicemessages for VAT exemptions


I.S. CWA 15578:20061729.

Survey of VAT Data Element usage in the Member States and the use of codes for VATExemptions


I.S. CWA 15579:20061730.

E-invoices and digital signatures


I.S. CWA 15580:20061731.

Storage of Electronic Invoices


I.S. CWA 15581:20061732.

Guidelines for eInvoicing Service Providers


I.S. CWA 15582:20061733.

eInvoice Reference Model for EU VAT purposes specification


I.S. EN ISO 12865:20061734.

Ophthalmic instruments - Retinoscopes (ISO 12865:2006)


I.S. EN 61558-1:2006/AC:20061735.

Safety of power transformers, power supplies, reactors and similar products -- Part 1:General requirements and tests (IEC 61558-1:2005 (EQV))


Date: 18/07/2018 Page

I.S. EN 196-10:20061736.

Methods of testing cement - Part 10: Determination of the watersoluble chromium (VI)content of cement

4 OCTOBER 2006Date published

I.S. EN 14341:20061737.

Industrial valves - Steel check valves


I.S. EN 15090:20061738.

Footwear for firefighters


I.S. EN 12174:20061739.

Chemicals used for treatment of water intended for human consumption - Sodiumhexafluorosilicate


I.S. EN 12175:20061740.

Chemicals used for treatment of water intended for human consumption -Hexafluorosilicic acid


I.S. EN 1018:20061741.

Chemicals used for treatment of water intended for human consumption - Calciumcarbonate


I.S. EN 1806:20061742.

Chimneys - Clay/ceramic flue blocks for single wall chimneys - Requirements and testmethods


I.S. EN 14973:20061743.

Conveyor belts for use in underground installations - Electrical and flammability safetyrequirements


I.S. EN 15112:20061744.

External cathodic protection of well casings


I.S. EN 14512:20061745.

Tanks for the transport of dangerous goods - Tank equipment for the transport of liquidchemicals - Hinged manhole covers and neckrings with pivoting bolts


I.S. EN 13269:20061746.

Maintenance - Guideline on preparation of maintenance contracts


I.S. EN 13836:20061747.

Gas fired central heating boilers - Type B boilers of nominal heat input exceeding 300kW, but not exceeding 1 000 kW


I.S. EN 927-6:20061748.

Paints and varnishes - Coating materials and coating systems for exterior wood - Part 6:Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water


Date: 18/07/2018 Page

I.S. EN 15060:20061749.

Paints and varnishes - Guide for the classification and selection of coating systems forwood based materials in furniture for interior use


I.S. EN 14718:20061750.

Influence of organic materials on water intended for human consumption - Determinationof the chlorine demand - Test method


I.S. EN 936:20061751.

Chemicals used for treatment of water intended for human consumption - Carbondioxide


I.S. EN 14293:20061752.

Adhesives - Adhesives for bonding parquet to subfloor - Test methods and minimumrequirements


I.S. EN 15196:20061753.

Water quality - Guidance on sampling and processing of the pupal exuviae ofChironomidae (Order Diptera) for ecological assessment


I.S. EN 14730-1:20061754.

Railway applications - Track - Aluminothermic welding of rails - Part 1: Approval ofwelding processes


I.S. EN 14730-2:20061755.

Railway applications - Track - Aluminothermic welding of rails - Part 2: Qualification ofaluminothermic welders, approval of contractors and acceptance of welds


I.S. EN 14813-1:20061756.

Railway applications - Air conditioning for driving cabs - Part 1: Comfort parameters


I.S. EN 14813-2:20061757.

Railway applications - Air conditioning for driving cabs - Part 2: Type tests


I.S. EN 14067-5:20061758.

Railway applications - Aerodynamics - Part 5: Requirements and test procedures foraerodynamics in tunnels


I.S. EN 13146-8:2002/A1:20061759.

Railway applications - Track - Test methods for fastening systems - Part 8: In servicetesting


I.S. EN 13481-1:2002/A1:20061760.

Railway applications - Track - Performance requirements for fastening systems - Part 1:Definitions


I.S. EN 13481-2:2002/A1:20061761.

Railway applications - Track - Performance requirements for fastening systems - Part 2:Fastening systems for concrete sleepers


Date: 18/07/2018 Page

I.S. EN 13481-3:2002/A1:20061762.

Railway applications - Track - Performance requirements for fastening systems - Part 3:Fastening systems for wood sleepers


I.S. EN 13481-4:2002/A1:20061763.

Railway applications - Track - Performance requirements for fastening systems - Part 4:Fastening systems for steel sleepers


I.S. EN 13481-5:2002/A1:20061764.

Railway applications - Track - Performance requirements for fastening systems - Part 5:Fastening systems for slab track


I.S. EN 13146-4:2002/A1:20061765.

Railway applications - Track - Test methods for fastening systems - Part 4: Effect ofrepeated loading


I.S. EN 13481-7:2002/A1:20061766.

Railway applications - Track - Performance requirements for fastening systems - Part 7:Special fastening systems for switches and crossings and check rails


I.S. EN 14681:20061767.

Safety of machinery - Safety requirements for machinery and equipment for productionof steel by electric arc furnaces


I.S. EN 10083-2:20061768.

Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloysteels


I.S. EN 10083-3:20061769.

Steels for quenching and tempering - Part 3: Technical delivery conditions for alloysteels


I.S. EN ISO 4259:20061770.

Petroleum products - Determination and application of precision data in relation tomethods of test (ISO 4259:2006)


I.S. EN 335-1:20061771.

Durability of wood and wood- based products - Definition of use classes - Part 1:General


I.S. EN 335-2:20061772.

Durability of wood and wood-based products - Definition of use classes - Part 2:Application to solid wood


I.S. EN 846-8:2000/A1:20061773.

Methods of test for ancillary components for masonry - Part 8: Determination of loadcapacity and load-deflection characteristics of joist hangers


Date: 18/07/2018 Page

I.S. EN 926-1:20061774.

Paragliding equipment - Paragliders - Part 1: Requirements and test methods forstructural strength


I.S. EN 482:20061775.

Workplace atmospheres - General requirements for the performance of procedures forthe measurement of chemical agents


I.S. EN 13053:20061776.

Ventilation for buildings - Air handling units - Rating and performance for units,components and sections


I.S. EN 15156:20061777.

Advanced technical ceramics - Mechanical properties of ceramic composites at roomtemperature - Determination of fatigue properties at constant amplitude


I.S. EN 15157:20061778.

Advanced technical ceramics - Mechanical properties of ceramic composites at hightemperature in air at atmospheric pressure - Determination of fatigue properties atconstant amplitude


I.S. EN 15158:20061779.

Advanced technical ceramics - Mechanical properties of ceramic composites at hightemperature under inert atmosphere - Determination of fatigue properties at constantamplitude


I.S. EN ISO 13433:20061780.

Geosynthetics - Dynamic perforation test (cone drop test) (ISO 13433:2006)


I.S. EN 13361:2004/A1:20061781.

Geosynthetic barriers - Characteristics required for use in the construction of reservoirsand dams


I.S. EN 13491:2004/A1:20061782.

Geosynthetic barriers -Characteristics required for use as a fluid barrier in theconstruction of tunnels and underground structures


I.S. EN 13492:2004/A1:20061783.

Geosynthetic barriers - Characteristics required for use in the construction of liquidwaste disposal sites, transfer stations or secondary containment


I.S. EN 1846-2:2002/A2:20061784.

Firefighting and rescue service vehicles - Part 2: Common requirements - Safety andperformance


I.S. EN 15416-4:20061785.

Adhesives for load bearing timber structures other than phenolic and aminoplastic - Testmethods - Part 4: Determination of open assembly time for one component polyurethaneadhesives


Date: 18/07/2018 Page

I.S. EN 15416-5:20061786.

Adhesives for load bearing timber structures other than phenolic and aminoplastic - Testmethods - Part 5: Determination of conventional pressing time


I.S. EN ISO 17665-1:20061787.

Sterilization of health care products - Moist heat - Part 1: Requirements for thedevelopment, validation and routine control of a sterilization process for medical devices(ISO 17665-1:2006)


I.S. EN 12441-11:20061788.

Zinc and zinc alloys - Chemical analysis - Part 11: Determination of silicon in zinc alloys- Spectrophotometric method


I.S. EN 1622:20061789.

Water quality - Determination of the threshold odour number (TON) and thresholdflavour number (TFN)


I.S. EN ISO 19458:20061790.

Water quality - Sampling for microbiological analysis (ISO 19458:2006)


I.S. EN 12405-1:2005/A1:20061791.

Gas meters - Conversion devices - Part 1: Volume conversion


I.S. EN 14811:20061792.

Railway applications - Track - Special purpose rail - Grooved and associatedconstruction


I.S. EN 14197-2:2003/A1:20061793.

Cryogenic vessels - Static non-vacuum insulated vessels - Part 2: Design, fabrication,inspection and testing


I.S. CEN TR 15449:20061794.

Geographic information - Standards, specifications, technical reports and guidelines,required to implement Spatial Data Infrastructure


I.S. EN 13200-5:20061795.

Spectator facilities - Part 5: Telescopic stands


I.S. EN 13200-6:20061796.

Spectator facilities - Part 6: Demountable (temporary) stands


I.S. CEN TS 14175-5:20061797.

Fume cupboards - Part 5: Recommendations for installation and maintenance


I.S. EN 10325:20061798.

Steel - Determination of yield strength increase by the effect of heat treatment [Bake-Hardening-Index]


Date: 18/07/2018 Page

I.S. EN 10268:20061799.

Cold rolled steel flat products with high yield strength for cold forming - Technicaldelivery conditions


I.S. EN 10083-1:20061800.

Steels for quenching and tempering - Part 1: General technical delivery conditions


I.S. EN 13411-7:2006/LC:20061801.

Terminations for steel wire ropes - Safety - Part 7: Symmetric wedge socket (incl.corrig.Sept.06)


I.S. EN 3444:2006/LC:20061802.

Aerospace series - Bolt, large bihexagonal head, close tolerance normal shank, mediumlength thread, in heat resisting nickel base alloy, passivated - Classification: 1 250 MPa(at ambient temperature) / 650 °C


I.S. EN 13445-5:2002/A5:20061803.

Unfired pressure vessels - Part 5: Inspection and testing


I.S. EN 13412:20061804.

Products and systems for the protection and repair of concrete structures - Testmethods - Determination of modulus of elasticity in compression


I.S. EN 15184:20061805.

Products and systems for the protection and repair of concrete structures - Testmethods - Shear adhesion of coated steel to concrete (pull-out test)


I.S. EN 12841:20061806.

Personal fall protection equipment - Rope access systems - Rope adjustment devices


I.S. EN 13832-1:20061807.

Footwear protecting against chemicals - Part 1: Terminology and test methods


I.S. EN 13832-2:20061808.

Footwear protecting against chemicals - Part 2: Requirements for footwear resistant tochemicals under laboratory conditions


I.S. EN 13832-3:20061809.

Footwear protecting against chemicals - Part 3: Requirements for footwear highlyresistant to chemicals under laboratory conditions


I.S. EN ISO 18369-1:20061810.

Ophthalmic optics - Contact lenses - Part 1: Vocabulary, classification system andrecommendations for labelling specifications (ISO 18369-1:2006)


I.S. EN ISO 18369-2:20061811.

Ophthalmic optics - Contact lenses - Part 2: Tolerances (ISO 18369-2:2006


Date: 18/07/2018 Page

I.S. EN 13999-1:20061812.

Adhesives - Short term method for measuring the emission properties of low-solvent orsolvent-free adhesives after application - Part 1: General procedure


I.S. EN 15204:20061813.

Water quality - Guidance standard on the enumeration of phytoplankton using invertedmicroscopy (Utermöhl technique)


I.S. EN 13815:20061814.

Fibrous gypsum plaster casts - Definitions, requirements and test methods


I.S. EN 14969:20061815.

Railway applications - Track - Qualification system for railway trackwork contractors


I.S. EN 14968:20061816.

Semantics for groundwater data interchange


I.S. EN 14470-2:20061817.

Fire safety storage cabinets - Part 2: Safety cabinets for pressurised gas cylinders


I.S. EN ISO 4404-1:20061818.

Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 1: Watercontaining fluids (ISO 4404-1:2001)


I.S. EN ISO 13732-1:20061819.

Ergonomics of the thermal environment - Methods for the assessment of humanresponses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006)


I.S. EN ISO 11254-3:20061820.

Lasers and laser-related equipment - Determination of laserinduced damage thresholdof optical surfaces - Part 3:Assurance of laser power (energy) handling capabilities (ISO11254-3:2006)


I.S. EN ISO 21227-2:20061821.

Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging -Part 2: Evaluation procedure for multiimpact stone-chipping test (ISO 21227-2:2006)


I.S. EN 14277:20061822.

Ventilation for buildings - Air terminal devices - Method for airflow measurement bycalibrated sensors in or close to ATD/plenum boxes


I.S. EN 12097:20061823.

Ventilation for Buildings - Ductwork - Requirements for ductwork components to facilitatemaintenance of ductwork systems


I.S. EN ISO 12402-5:20061824.

Personal flotation devices - Part 5: Buoyancy aids (level 50) - Safety requirements (ISO12402-5:2006)


Date: 18/07/2018 Page

I.S. EN ISO 12402-4:20061825.

Personal flotation devices - Part 4: Lifejackets, performance level 100 - Safetyrequirements (ISO 12402-4:2006)


I.S. EN ISO 12402-3:20061826.



I.S. EN ISO 12402-2:20061827.



I.S. EN ISO 12402-9:20061828.

Personal flotation devices - Part 9: Test methods (ISO 12402-9:2006)


I.S. EN ISO 12236:20061829.

Geosynthetics - Static puncture test (CBR test) (ISO 12236:2006)


I.S. EN ISO 20079:20061830.

Water quality - Determination of the toxic effect of water constituents and waste wateron duckweed (Lemna minor) Duckweed growth inhibition test (ISO 20079:2005)


I.S. EN ISO 8988:20061831.

Plastics - Phenolic resins - Determination ofhexamethylenetetramine content - Kjeldahl method, perchloric acid method andhydrochloric acid method (ISO 8988:2006)


I.S. CEN TR 15299:20061832.

Health informatics - Safety procedures for identification of patients and related objects


I.S. EN 14693:20061833.

Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and otherconcrete surfaces trafficable by vehicles - Determination of the behaviour of bitumensheets duringapplication of mastic asphalt


I.S. EN ISO 15753:20061834.

Animal and vegetable fats and oils - Determination of polycyclic aromatic hydrocarbons(ISO 15753:2006)


I.S. EN 14896:20061835.

Bitumen and bituminous binders - Dynamic viscosity of bituminous emulsions, cut-backand fluxed bituminous binders - Rotating spindle viscometer method


I.S. CWA 15596:20061836.

Code of Practice on cleanability of commercial food equipment used in the retail andcatering sectors


Date: 18/07/2018 Page

I.S. EN 14783:20061837.

Fully supported metal sheet and strip for roofing, external cladding and internal lining -Product specification and requirements


I.S. EN 13981-3:20061838.

Aluminium and aluminium alloys - Products for structural railway applications - Technicalconditions for inspection and delivery - Part 3: Castings


I.S. EN 15132:20061839.

Container shells for mobile waste containers with a capacity up to 1 700 l - Performancerequirements and test methods


I.S. EN 869:20061840.

Safety of machinery - Safety requirements for pressure metal diecasting units


I.S. EN 14620-1:20061841.

Design and manufacture of site built, vertical, cylindrical, flatbottomed steel tanks for thestorage of refrigerated, liquefied gases with operating temperatures between 0 °C and-165 °C - Part 1: General


I.S. EN 14620-2:20061842.

Design and manufacture of site built, vertical, cylindrical, flatbottomed steel tanks for thestorage of refrigerated, liquefied gases with operating temperatures between 0 °C and-165 °C - Part 2: Metallic components


I.S. EN 14620-3:20061843.

Design and manufacture of site built, vertical, cylindrical, flatbottomed steel tanks for thestorage of refrigerated, liquefied gases with operating temperatures between 0 °C and-165 °C - Part 3: Concrete components


I.S. EN 14620-4:20061844.

Design and manufacture of site built, vertical, cylindrical, flatbottomed steel tanks for thestorage of refrigerated, liquefied gases with operating temperatures between 0 °C and-165 °C - Part 4: Insulation components


I.S. EN 14620-5:20061845.

Design and manufacture of site built, vertical, cylindrical, flatbottomed steel tanks for thestorage of refrigerated, liquefied gases with operating temperatures between 0 °C and-165 °C - Part 5: Testing, drying, purging and cool-down


I.S. EN 12183:20061846.

Manual wheelchairs - Requirements and test methods


I.S. EN 12184:20061847.

Electrically powered wheelchairs, scooters and their chargers - Requirements and testmethods


I.S. EN ISO 10077-1:20061848.

Thermal performance of windows, doors and shutters - Calculation of thermaltransmittance - Part 1: General (ISO 10077-1:2006)


Date: 18/07/2018 Page

I.S. EN ISO 17660-1:20061849.

Welding - Welding of reinforcing steel - Part 1: Load-bearing welded joints (ISO 17660-1:2006)


I.S. EN ISO 17660-2:20061850.

Welding - Welding of reinforcing steel - Part 2: Non load-bearing welded joints (ISO17660-2:2006)


I.S. EN ISO 11979-9:20061851.

Ophthalmic implants - Intraocular lenses - Part 9: Multifocal intraocular lenses (ISO11979-9:2006)


I.S. EN ISO/IEC 17021:20061852.

Conformity assessment - Requirements for bodies providing audit and certification ofmanagement systems (ISO/IEC 17021:2006)


I.S. CEN TR 15444:20061853.

Transportable gas cylinders - Gas cylinders conforming to the TPED to be used for PEDapplications - Applicability and justifications


I.S. EN 15036-1:20061854.

Heating boilers - Test regulations for airborne noise emissions from heat generators -Part 1: Airborne noise emissions from heat generators


I.S. EN 15036-2:20061855.

Heating boilers - Test regulations for airborne noise emissions from heat generators -Part 2: Flue gas noise emissions at the outlet of the heat generator


I.S. EN 1603:1996/A1:20061856.

Thermal insulating products for building applications - Determination of dimensionalstability under constant normal laboratory conditions (23 °C/50 % relative humidity)


I.S. EN 1604:1996/A1:20061857.

Thermal insulating products for building applications - Determination of dimensionalstability under specified temperature and humidity conditions


I.S. EN 1605:1996/A1:20061858.

Thermal insulating products for building applications - Determination of deformationunder specified compressive load and temperature conditions


I.S. EN 1606:1996/A1:20061859.

Thermal insulating products for building applications - Determination of compressivecreep


I.S. EN 1609:1996/A1:20061860.

Thermal insulating products for building applications - Determination of dimensionalshort term water absorption by partial immersion


Date: 18/07/2018 Page

I.S. EN 12087:1997/A1:20061861.

Thermal insulating products for building applications - Determination of long term waterabsorption by immersion


I.S. EN 12430:1998/A1:20061862.

Thermal insulating products for building applications - Determination of behaviour underpoint load


I.S. EN 12431:1998/A1:20061863.

Thermal insulating products for building applications - Determination of thickness forfloating floor insulating products


I.S. EN 1364-3:20061864.

Fire resistance tests for non-loadbearing elements - Part 3: Curtain walling - Fullconfiguration (complete assembly)


I.S. EN 12467:2004/A2:20061865.

Fibre cement flat sheets - Product specification and test methods


I.S. EN 492:2004/A2:20061866.

Fibre cement slates and fittings - Product specification and test methods


I.S. EN 494:2004/A2:20061867.

Fibre cement profiled sheets and fittings - Product specification and test methods


I.S. CEN TS 14938-2:20061868.

Copper and copper alloys - Determination of bismuth content - Part 2: FAAS method


I.S. EN 14492-1:20061869.

Cranes - Power driven winches and hoists - Part 1: Power driven winches


I.S. EN 1459:1998/A1:20061870.

Safety of industrial trucks - Self-propelled variable reach trucks


I.S. EN ISO 12402-6:20061871.

Personal flotation devices - Part 6: Special purpose lifejackets and buoyancy aids -Safety requirements and additional test methods (ISO 12402-6:2006)


I.S. EN 648:20061872.

Paper and board intended to come into contact with foodstuffs - Determination of thefastness of fluorescent whitened paper and board


I.S. CEN TS 1007-7:20061873.

Advanced technical ceramics - Ceramic composites. Methods of test for reinforcements- Part 7: Determination of the distribution of tensile strength and of tensile strain tofailure of filaments within a multifilament tow at high temperature


I.S. EN 1614:20061874.

Health informatics - Representation of dedicated kinds of property in laboratory medicine


Date: 18/07/2018 Page

I.S. CEN TS 15084:20061875.

Liming materials - Guide to the determination of the lime requirement


I.S. CEN TS 15475:20061876.

Fertilizers - Determination of ammoniacal nitrogen


I.S. CEN TS 15476:20061877.

Fertilizers - Determination of nitric and ammoniacal nitrogen according to Devarda


I.S. CEN TS 15477:20061878.

Fertilizers - Determination of the water-soluble potassium content


I.S. CEN TS 15478:20061879.

Fertilizers - Determination of total nitrogen in urea


I.S. CEN TS 15479:20061880.

Fertilizers - Spectrophotometric determination of biuret in urea


I.S. CEN TS 15277:20061881.

Non-active surgical implants - Injectable implants


I.S. EN 15154-2:20061882.

Emergency safety showers - Part 2: Plumbed-in eye wash units


I.S. EN 15154-1:20061883.

Emergency safety showers - Part 1: Plumbed-in body showers for laboratories


I.S. CEN TS 15370-1:20061884.

Solid biofuels - Method for the determination of ash melting behaviour - Part 1:Characteristic temperatures method


I.S. EN ISO 22475-1:20061885.

Geotechnical investigation and testing - Sampling methods and groundwatermeasurements - Part 1: Technical principles for execution (ISO 22475-1:2006)


I.S. CEN ISO TS 22475-2:20061886.

Geotechnical investigation and testing - Sampling methods and groundwatermeasurements - Part 2: Qualification criteria for enterprises and personnel (ISO/TS22475-2:2006)


I.S. CEN TS 15407:20061887.

Solid recovered fuels - Method for the determination of carbon (C), hydrogen (H) andnitrogen (N) content


I.S. CEN/TS 15408:20061888.

Solid recovered fuels - Methods for the determination of sulphur (S), chlorine (Cl),fluorine (F) and bromine (Br) content


Date: 18/07/2018 Page

I.S. CEN TS 15410:20061889.

Solid recovered fuels - Method for the determination of the content of major elements(Al, Ca, Fe, K, Mg, Na, P, Si, Ti)


I.S. CEN TS 15411:20061890.

Solid recovered fuels - Methods for the determination of the content of trace elements(As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn)


I.S. CEN TS 15412:20061891.

Solid recovered fuels - Methods for the determination of metallic aluminium


I.S. CEN TS 15413:20061892.

Solid recovered fuels - Methods for the preparation of the test sample from thelaboratory sample


S.R. ISO/TR 22869:20061893.

Medical laboratories — Guidance onlaboratory implementation of ISO 15189:2003


I.S. EN 15199-1:20061894.

Petroleum products - Determination of boiling range distribution by gas chromatographymethod - Part 1: Middle distillates and lubricating base oils


I.S. EN 15199-2:20061895.

Petroleum products - Determination of boiling range distribution by gas chromatographymethod - Part 2: Heavy distillates and residual fuels


I.S. EN ISO 14731:20061896.

Welding coordination - Tasks and responsibilities (ISO 14731:2006)


I.S. EN ISO 14555:20061897.

Welding - Arc stud welding of metallic materials (ISO 14555:2006)


I.S. EN ISO 9453:20061898.

Soft solder alloys - Chemical compositions and forms (ISO 9453:2006)


I.S. EN 15022-3:20061899.

Copper and copper alloys - Determination of tin content - Part 3: Low tin content - Flameatomic absorption spectrometry method (FAAS)


I.S. EN 1744-5:20061900.

Tests for chemical properties of aggregates - Part 5: Determination of acid solublechloride salts


I.S. EN 1744-6:20061901.

Tests for chemical properties of aggregates - Part 6: Determination of the influence ofrecycled aggregate extract on the initial setting time of cement


Date: 18/07/2018 Page

I.S. EN 14982:20061902.

Plastics piping and ducting systems - Thermoplastics shafts or risers for inspectionchambers and manholes - Determination of ring stiffness


I.S. EN 13407:20061903.

Wall-hung urinals - Functional requirements and test methods


I.S. EN 877:1999/A1:20061904.

Cast iron pipes and fittings, their joints and accessories for the evacuation of water frombuildings - Requirements, test methods and quality assurance


I.S. EN 15187:20061905.

Furniture - Assessment of the effect of light exposure


I.S. EN 12312-14:20061906.

Aircraft ground support equipment - Specific requirements - Part 14:Disabled/incapacitated passenger boarding vehicles


I.S. EN 14981:20061907.

Surface active agents - Determination of content of high boiling solvents in liquiddetergents by GLC


I.S. EN ISO 16201:20061908.

Technical aids for disabled persons - Environmental control systems for daily living (ISO16201:2006)


I.S. EN ISO 22523:20061909.

External limb prostheses and external orthoses - Requirements and test methods (ISO22523:2006)


I.S. EN ISO 13366-2:20061910.

Milk - Enumeration of somatic cells - Part 2: Guidance on the operation of fluoro-opto-electronic counters (ISO 13366-2:2006)


I.S. EN 13200-4:20061911.

Spectator facilities - Part 4: Seats - Product characteristics


I.S. CEN TR 15472:20061912.

Postal services - Measurement of transit times for parcels by the use of a track andtrace system


I.S. EN ISO 7886-4:20061913.

Sterile hypodermic syringes for single use - Part 4: Syringes with re-use preventionfeature (ISO 7886-4:2006)


I.S. EN 15056:20061914.

Cranes - Requirements for container handling spreaders


Date: 18/07/2018 Page

I.S. EN ISO 10328:20061915.

Prosthetics - Structural testing of lower-limb prostheses - Requirements and testmethods (ISO 10328:2006)


I.S. EN ISO 22675:20061916.

Prosthetics - Testing of ankle-foot devices and foot units - Requirements and testmethods (ISO 22675:2006)


I.S. EN ISO 12156-1:20061917.

Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) -Part 1: Test method (ISO 12156-1:2006)


I.S. EN 71-1:2005/A3:20061918.

Safety of toys - Part 1: Mechanical and physical properties


I.S. EN 13445-8:20061919.

Unfired pressure vessels - Part 8: Additional requirements for pressure vessels ofaluminium and aluminium alloys


I.S. EN ISO 15841:20061920.

Dentistry - Wires for use in orthodontics (ISO 15841:2006)


I.S. EN ISO 16409:20061921.

Dentistry - Oral hygiene products - Manual interdental brushes (ISO 16409:2006)


I.S. EN ISO 15912:20061922.

Dentistry - Casting investments and refractory die materials (ISO 15912:2006)


I.S. EN 480-14:20061923.

Admixtures for concrete, mortar and grout - Test methods - Part 14: Determination of theeffect on corrosion susceptibility of reinforcing steel by potentiostatic electro-chemicaltest


I.S. EN 303-7:20061924.

Heating boilers - Part 7: Gas-fired central heating boilers equipped with a forced draughtburner of nominal heat output not exceeding 1 000 kW


I.S. EN 14963:20061925.

Roof coverings - Continuous rooflights of plastics with or without upstands -Classification, requirements and test methods


I.S. EN 15114:20061926.

Textile floor coverings - Classification of textile floor coverings without pile


I.S. EN 500-1:20061927.

Mobile road construction machinery - Safety - Part 1: Common requirements


Date: 18/07/2018 Page

I.S. EN 500-2:20061928.

Mobile road construction machinery - Safety - Part 2: Specific requirements for road-milling machines


I.S. EN 500-3:20061929.

Mobile road construction machinery - Safety - Part 3: Specific requirements for soil-stabilising machines and recycling machines


I.S. EN 500-6:20061930.

Mobile road construction machinery - Safety - Part 6: Specific requirements for paver-finishers


I.S. EN 1197:20061931.

Chemicals used for treatment of water intended for human consumption - Monozincphosphate solution


I.S. EN 14680:20061932.

Adhesives for non-pressure thermoplastic piping systems - Specifications


I.S. EN 13321-2:20061933.

Open data communication in building automation, controls and building management -Home and building electronic systems - Part 2: KNXnet/IP Communication


I.S. CEN TR 15212:20061934.

Health informatics - Vocabulary - Maintenance procedure for a web-based terms andconcepts database


I.S. CEN TR 15300:20061935.

Health informatics - Framework for formal modelling of healthcare security policies


I.S. EN 15006:20061936.

Metal aerosol containers - Aluminium containers - Dimensions of the 25,4 mm aperture


I.S. EN 15007:20061937.

Metal aerosol containers - Tinplate containers - Dimensions of two and three-piece cans


I.S. EN 15008:20061938.

Aerosol containers - Aluminium containers - Dimensions of onepiece cans with 25,4 mmaperture


I.S. EN 15009:20061939.

Aerosol containers - Compartmented aerosol containers


I.S. EN 15010:20061940.

Aerosol containers - Aluminium containers - Tolerances of the fundamental dimensionsin connection with the clinch


Date: 18/07/2018 Page

I.S. EN ISO 17070:20061941.

Leather - Chemical tests - Determination of pentachlorophenol content (ISO17070:2006)


I.S. EN ISO 5943:20061942.

Cheese and processed cheese products - Determination of chloride content -Potentiometric titration method (ISO 5943:2006)


I.S. EN 14656:20061943.

Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals


I.S. EN 60603-7-7:20061944.

Connectors for electronic equipment -- Part 7-7: Detail specification for 8-way, shielded,free and fixed connectors for data transmission with frequencies up to 600 MHz (IEC60603-7-7:2006 (EQV))


I.S. EN 60534-4:20061945.

Industrial-process control valves -- Part 4: Inspection and routine testing (IEC 60534-4:2006 (EQV))


I.S. EN 61534-21:20061946.

Powertrack systems -- Part 21: Particular requirements for powertrack systems intendedfor wall and ceiling mounting (IEC 61534-21:2006 (EQV))


I.S. EN 61966-2-4:20061947.

Multimedia systems and equipment - Colour measurement and management -- Part 2-4:Colour management - Extended-gamut YCC colour space for video applications -xvYCC (IEC 61966-2-4:2006 (EQV))


I.S. EN 62258-5:20061948.

Semiconductor die products -- Part 5: Requirements for information concerning electricalsimulation (IEC 62258-5:2006 (EQV))


I.S. EN 62258-6:20061949.

Semiconductor die products -- Part 6: Requirements for information concerning thermalsimulation (IEC 62258-6:2006 (EQV))


I.S. EN 62317-9:20061950.

Ferrite cores - Dimensions -- Part 9: Planar cores (IEC 62317-9:2006 (EQV))


I.S. HD 638 S1:2001/A1:20061951.

Road traffic signal systems


I.S. EN 62395-1:20061952.

Electrical resistance trace heating systems for industrial and commercial applications --Part 1: General and testing requirements (IEC 62395-1:2006 (EQV))


Date: 18/07/2018 Page

I.S. EN 62047-3:20061953.

Semiconductor devices - Micro-electromechanical devices -- Part 3: Thin film standardtest piece for tensile testing (IEC 62047-3:2006 (EQV))


I.S. EN 62047-2:20061954.

Semiconductor devices - Micro-electromechanical devices -- Part 2: Tensile testingmethod of thin film materials (IEC 62047-2:2006 (EQV))


I.S. EN 60749-35:20061955.

Semiconductor devices - Mechanical and climatic test methods -- Part 35: Acousticmicroscopy for plastic encapsulated electronic components (IEC 60749-35:2006 (EQV))


I.S. EN 60669-2-3:20061956.

Switches for household and similar fixed electrical installations -- Part 2-3: Particularrequirements - Time delay switches (TDS) (IEC 60669-2-3:2006 (EQV))


I.S. EN 60669-2-2:20061957.

Switches for household and similar fixed electrical installations -- Part 2-2: Particularrequirements - Electromagnetic remote-control switches (RCS) (IEC 60669-2-2:2006(EQV))


I.S. EN 60519-2:20061958.

Safety in electroheat installations -- Part 2: Particular requirements for resistanceheating equipment (IEC 60519-2:2006 (EQV))


I.S. EN 60519-4:20061959.

Safety in electroheat installations -- Part 4: Particular requirements for arc furnaceinstallations (IEC 60519-4:2006 (EQV))


I.S. EN 55022:20061960.

Information technology equipment - Radio disturbance characteristics - Limits andmethods of measurement (CISPR 22:2005 (MOD))


I.S. EN 60318-5:20061961.

Electroacoustics - Simulators of human head and ear -- Part 5: 2 cm≥ coupler for themeasurement of hearing aids and earphones coupled to the ear by means of ear inserts(IEC 60318-5:2006 (EQV))


I.S. EN 60335-2-102:20061962.

Household and similar electrical appliances - Safety -- Part 2-102: Particularrequirements for gas, oil and solid-fuel burning appliances having electrical connections(IEC 60335-2-102:2004 (MOD))


I.S. EN 60335-2-14:20061963.

Household and similar electrical appliances - Safety -- Part 2-14: Particular requirementsfor kitchen machines (IEC 60335-2-14:2006 (MOD))


Date: 18/07/2018 Page

I.S. EN 60335-2-25:2002/A2:20061964.

Household and similar electrical appliances - Safety -- Part 2-25: Particular requirementsfor microwave ovens, including combination microwave ovens (IEC 60335-2-25:2002/A2:2006 (EQV))


I.S. EN 61189-2:20061965.

Test methods for electrical materials, printed boards and other interconnectionstructures and assemblies -- Part 2: Test methods for materials for interconnectionstructures (IEC 61189-2:2006 (EQV))


I.S. EN 61189-5:20061966.

Test methods for electrical materials, interconnection structures and assemblies -- Part5: Test methods for printed board assemblies (IEC 61189-5:2006 (EQV))


I.S. EN 61747-3:20061967.

Liquid crystal display devices -- Part 3: Liquid crystal diplay (LCD) cells - Sectionalspecification (IEC 61747-3:2006 (EQV))


I.S. EN 62384:20061968.

DC or AC supplied electronic control gear for LED modules - Performance requirements(IEC 62384:2006 (EQV))


I.S. EN 60076-13:20061969.

Power transformers -- Part 13: Self-protected liquid-filled transformers (IEC 60076-13:2006 (EQV))


I.S. EN 50446:20061970.

Straight thermocouple assembly with metal or ceramic protection tube and accessories


I.S. EN 60456:2005/A11:20061971.

Clothes washing machines for household use - Methods for measuring the performance


I.S. EN 61326-2-5:20061972.

Electrical equipment for measurement, control and laboratory use - EMC requirements --Part 2-5: Particular requirements - Test configurations, operational conditions andperformance criteria for field devices with interfaces according to IEC 61784-1, CP 3/2(IEC 61326-2-5:2006 (EQV))


I.S. EN 60601-1-8:2004/A1:2006/AC:20061973.

Medical electrical equipment -- Part 1-8: General requirements for safety - Collateralstandard: General requirements, tests and guidance for alarm systems in medicalelectrical equipment and medical electrical systems (IEC 60601-1-8:2003/A1:2006(EQV))


I.S. EN 50065-2-2:2003/A1:2006/AC:20061974.

Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5kHz -- Part 2-2: Immunity requirements for mains communications equipment andsystems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for usein industrial environments


Date: 18/07/2018 Page

I.S. EN 50216-5:2002/A3:20061975.

Power transformer and reactor fittings -- Part 5: Liquid level, pressure and flowindicators, pressure relief devices and dehydrating breathers


I.S. EN 50216-3:2002/A2:20061976.

Power transformer and reactor fittings -- Part 3: Protective relay for hermetically sealedliquid-immersed transformers and reactors without gaseous cushion


I.S. EN 60027-1:20061977.

Letter symbols to be used in electrical technology -- Part 1: General (IEC 60027-1:1995(Reprint) (EQV) + A1:1997 (EQV))


I.S. EN 60695-4:20061978.

Fire hazard testing -- Part 4: Terminology concerning fire tests for electrotechnicalproducts (IEC 60695-4:2005 (EQV))


I.S. EN 60958-3:20061979.

Digital audio interface -- Part 3: Consumer applications (IEC 60958-3:2006 (EQV))


I.S. EN 61788-10:20061980.

Superconductivity -- Part 10: Critical temperature measurement - Critical temperature ofcomposite superconductors by a resistance method (IEC 61788-10:2006 (EQV))


I.S. EN 50090-5-3:20061981.

Home and Building Electronic Systems (HBES) -- Part 5-3: Media and media dependentlayers - Radio frequency


I.S. EN 61212-3-3:20061982.

Insulating materials - Industrial rigid round laminated tubes and rods based onthermosetting resins for electrical purposes -- Part 3: Specifications for individualmaterials -- Sheet 3: Round laminated moulded rods (IEC 61212-3-3:2006 (EQV))


I.S. EN 62271-100:2001/A2:20061983.

High-voltage switchgear and controlgear -- Part 100: High-voltage alternating-currentcircuit-breakers (IEC 62271-100:2001/A2:2006 (EQV))


I.S. EN 62271-201:20061984.

High-voltage switchgear and controlgear -- Part 201: AC insulation-enclosed switchgearand controlgear for rated voltages above 1 kV and up to and including 52 kV (IEC 62271-201:2006 (EQV))


I.S. EN 50085-2-1:20061985.

Cable trunking systems and cable ducting systems for electrical installations -- Part 2-1:Cable trunking systems and cable ducting systems intended for mounting on walls andceilings


I.S. EN 60601-1:20061986.

Medical electrical equipment -- Part 1: General requirements for basic safety andessential performance (IEC 60601-1:2005 (EQV))


Date: 18/07/2018 Page

I.S. EN ISO 13503-4:20061987.

Petroleum and natural gas industries - Completion fluids and materials - Part 4:Procedure for measuring stimulation and gravel-pack fluid leakoff under static conditions(ISO 13503-4:2006)


I.S. EN 89:1999/A3:20061988.

Gas-fired storage water heaters for the production of domestic hot wate


I.S. EN 26:1997/A3:20061989.

Gas-fired instantaneous water heaters for the production of domestic hot water, fittedwith atmospheric burners


I.S. EN 14487-2:20061990.

Sprayed concrete - Part 2: Execution


I.S. EN 284:20061991.

Swap bodies - Non-stackable swap bodies of class C - Dimensions and generalrequirements


I.S. EN 12641-2:20061992.

Swap bodies and commercial vehicles - Tarpaulins - Part 2: Minimum requirements forcurtainsiders


I.S. EN 12642:20061993.

Securing of cargo on road vehicles - Body structure of commercial vehicles - Minimumrequirements


I.S. EN 14964:20061994.

Rigid underlays for discontinuous roofing - Definitions and characteristics


I.S. EN ISO 4618:20061995.

Paints and varnishes - Terms and definitions (ISO 4618:2006)


I.S. EN ISO 20567-1:20061996.

Paints and varnishes - Determination of stone-chip resistance of coatings - Part 1: Multi-impact testing (ISO 20567-1:2005)


I.S. EN ISO 20567-2:20061997.

Paints and varnishes - Determination of stone-chip resistance of coatings - Part 2:Single-impact test with a guided impact body(ISO 20567-2:2005)


I.S. EN ISO 20566:20061998.

Paints and varnishes - Determination of the scratch resistance of a coating system usinga laboratory car-wash (ISO 20566:2005)


Date: 18/07/2018 Page

I.S. EN ISO 5674:20061999.

Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO)drive-shafts - Strength and wear tests and acceptance criteria (ISO 5674:2004,corrected version 2005-07-01)


I.S. EN ISO 22868:20062000.

Forestry machinery - Noise test code for portable hand-held machines with internalcombustion engine - Engineering method (Grade 2 accuracy) (ISO 22868:2005,corrected version 2005-06-01)


I.S. EN 500-4:20062001.

Mobile road construction machinery - Safety - Part 4: Specific requirements forcompaction machines


I.S. EN 14830:20062002.

Thermoplastics inspection chamber and manhole bases - Test methods for bucklingresistance


I.S. EN ISO 16712:20062003.

Water quality - Determination of acute toxicity of marine or estuarine sediment toamphipods (ISO 16712:2005)


I.S. EN ISO 17294-1:20062004.

Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) -Part 1: General guidelines (ISO 17294-1:2004)


I.S. CEN TR 15351:20062005.

Plastics - Guide for vocabulary in the field of degradable and biodegradable polymersand plastic items


I.S. CEN ISO TS 17764-1:20062006.

Animal feeding stuffs - Determination of the content of fatty acids - Part 1: Preparation ofmethyl esters (ISO/TS 17764-1:2002)


I.S. CEN ISO TS 17764-2:20062007.

Animal feeding stuffs - Determination of the content of fatty acids - Part 2: Gaschromatographic method (ISO/TS 17764-2:2002)


I.S. CEN TS 15448:20062008.

Postal services - Open standard interface between image controller and enrichmentdevices (OCRs, video coding systems, voting systems)


I.S. CEN TR 15441:20062009.

Solid recovered fuels - Guidelines on occupational health aspects


I.S. CEN TS 15400:20062010.

Solid recovered fuels - Methods for the determination of calorific value


Date: 18/07/2018 Page

I.S. CEN TS 15401:20062011.

Solid recovered fuels - Methods for the determination of bulk density


I.S. CEN TS 15402:20062012.

Solid recovered fuels - Methods for the determination of the content of volatile matter


I.S. CEN TS 15403:20062013.

Solid recovered fuels - Methods for the determination of ash content


I.S. CEN TS 15404:20062014.

Solid recovered fuels - Methods for the determination of ash melting behaviour by usingcharacteristic temperatures


I.S. CEN TS 15405:20062015.

Solid recovered fuels - Methods for the determination of density of pellets and briquettes


I.S. CEN TS 15406:20062016.

Solid recovered fuels - Methods for the determination of bridging properties of bulkmaterial


I.S. CEN TS 15414-1:20062017.

Solid recovered fuels - Determination of moisture content using the oven dry method -Part 1: Determination of total moisture by a reference method


I.S. CEN TS 15414-2:20062018.

Solid recovered fuels - Determination of moisture content using the oven dry method -Part 2: Determination of total moisture by a simplified method


I.S. CEN TS 15414-3:20062019.

Solid recovered fuels - Determination of moisture content using the oven dry method -Part 3: Moisture in general analysis sample


I.S. CEN TS 15415:20062020.

Solid recovered fuels - Determination of particle size distribution by screen method


I.S. CEN TR 15508:20062021.

Key properties on solid recovered fuels to be used for establishing a classificationsystem


I.S. EN 2997-001:20062022.

Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200°C continuous, 260 °C peak - Part 001: Technical specification


I.S. EN 2997-002:20062023.

Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200°C continuous, 260 °C peak - Part 002: Specification of performance and contactarrangements


Date: 18/07/2018 Page

I.S. EN 2997-003:20062024.

Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200°C continuous, 260 °C peak - Part 003: Square flange receptacle - Product standard


I.S. EN 2997-004:20062025.

Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200°C continuous, 260 °C peak - Part 004: Jam-nut mounted receptacle - Product standard


I.S. EN 2997-005:20062026.

Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200°C continuous, 260 °C peak - Part 005: Hermetic square flange receptacle - Productstandard


I.S. EN 2997-006:20062027.

Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200°C continuous, 260 °C peak - Part 006: Hermetic jam-nut mounted receptacle - Productstandard


I.S. EN 2997-007:20062028.

Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200°C continuous, 260 °C peak - Part 007: Hermetic receptacle with round flangeattached by welding or brazing - Product standard


I.S. EN 2997-008:20062029.

Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200°C continuous, 260 °C peak - Part 008: Plug - Product standard


I.S. EN 2997-009:20062030.

Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200°C continuous, 260 °C peak - Part 009: Protective cover for receptacle - Productstandard


I.S. EN 2997-010:20062031.

Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200°C continuous, 260 °C peak - Part 010: Protective cover for plug - Product standard


I.S. EN 2997-011:20062032.

Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200°C continuous, 260 °C peak - Part 011: Dummy receptacle - Product standard


Date: 18/07/2018 Page

I.S. EN 4406:20062033.

Aerospace series - Paints and varnishes - Two component cold curing polyurethanecoating - Abrasion resistant


I.S. EN 4592:20062034.

Aerospace series - Paints and varnishes - Test method for determination of infraredreflectance


I.S. EN 10319-2:20062035.

Metallic materials - Tensile stress relaxation testing - Part 2: Procedure for bolted jointmodels


I.S. 251:20062036.

Marked gas oil


I.S. EN ISO 15839:20062037.

Water quality - On-line sensors/analysing equipment for water - Specifications andperformance tests (ISO 15839:2003)


I.S. 998:20062038.

Cash-in-transit services


I.S. EN 50216-5:2002/A2:2005/AC:20062039.

Power transformer and reactor fittings -- Part 5: Liquid level, pressure and flowindicators, pressure relief devices and dehydrating breathers


I.S. EN 50470-3:20062040.

Electricity metering equipment (a.c.) -- Part 3: Particular requirements - Static meters foractive energy (class indexes A, B and C)


I.S. EN 62329-2:20062041.

Heat shrinkable moulded shapes -- Part 2: Methods of test (IEC 62329-2:2006 (EQV))


I.S. EN 61391-1:20062042.

Ultrasonics - Pulse-echo scanners -- Part 1: Techniques for calibrating spatialmeasurement systems and measurement of system point-spread function response(IEC 61391-1:2006 (EQV))


I.S. EN 50470-1:20062043.

Electricity metering equipment (a.c.) -- Part 1: General requirements, tests and testconditions - Metering equipment (class indexes A, B and C)


I.S. EN 50470-2:20062044.

Electricity metering equipment (a.c.) -- Part 2: Particular requirements -Electromechanical meters for active energy (class indexes A and B)


I.S. EN 60439-5:20062045.

Low-voltage switchgear and controlgear assemblies -- Part 5: Particular requirementsfor assemblies for power distribution in public networks (IEC 60439-5:2006 (EQV))


Date: 18/07/2018 Page

I.S. EN 60825-4:20062046.

Safety of laser products -- Part 4: Laser guards (IEC 60825-4:2006 (EQV))


I.S. EN 50177:20062047.

Automatic electrostatic spraying equipment for flammable coating powder


I.S. EN 50050:20062048.

Electrical apparatus for potentially explosive atmospheres - Electrostatic hand-heldspraying equipment


I.S. EN 61587-3:20062049.

Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 --Part 3: Electromagnetic shielding performance tests for cabinets, racks and subracks(IEC 61587-3:2006 (EQV))


I.S. EN 50341-3:2006/AC:2006-042050.

Overhead electrical lines exceeding AC 45 kV -- Part 3: Set of National NormativeAspects


I.S. EN 61076-3-104:20062051.

Connectors for electronic equipment - Product requirements -- Part 3-104: Detailspecification for 8-way, shielded free and fixed connectors for data transmissions withfrequencies up to 1 000 MHz (IEC 61076-3-104:2006 (EQV))


I.S. EN 50131-1:20062052.

Alarm systems - Intrusion and hold-up systems -- Part 1: System requirements


I.S. EN 60216-6:20062053.

Electrical insulating materials - Thermal endurance properties -- Part 6: Determination ofthermal endurance indices (TI and RTE) of an insulating material using the fixed timeframe method (IEC 60216-6:2006 (EQV))


I.S. EN ISO 10426-1:20062054.

Petroleum and natural gas industries - Cements and materials for well cementing - Part1: Specification (ISO 10426-1:2005)


I.S. EN ISO 13628-10:20062055.

Petroleum and natural gas industries - Design and operation of subsea productionsystems - Part 10: Specification for bonded flexible pipe (ISO 13628-10:2005)


I.S. EN ISO 13679:20062056.

Petroleum and natural gas industries - Procedures for testing casing and tubingconnections (ISO 13679:2002)


I.S. EN 30-1-3:2003+A1:20062057.

Domestic cooking appliances burning gas - Part 1-3: Safety - Appliances having a glassceramic hotplate


Date: 18/07/2018 Page

I.S. EN 14359:20062058.

Gas-loaded accumulators for fluid power applications


I.S. EN 54-2:1999/A1:20062059.

Fire detection and fire alarm systems - Part 2: Control and indicating equipment


I.S. EN 1544:20062060.

Products and systems for the protection and repair of concrete structures - Testmethods - Determination of creep under sustained tensile load for synthetic resinproducts (PC) foranchoring of reinforcing bars


I.S. EN 14630:20062061.

Products and systems for the protection and repair of concrete structures - Testmethods - Determination of carbonation depth in hardened concrete by thephenolphthalein method


I.S. EN 1881:20062062.

Products and systems for the protection and repair of concrete structures - Testmethods - Testing of anchoring products by the pull-out method


I.S. EN 15218:20062063.

Air conditioners and liquid chilling packages with evaporatively cooled condenser andwith electrically driven compressors for space cooling - Terms, definitions, testconditions, test methods and requirements


I.S. EN 13001-2:2004/A1:20062064.

Cranes - General design - Part 2: Load actions


I.S. EN 14255-4:20062065.

Measurement and assessment of personal exposures to incoherent optical radiation -Part 4: Terminology and quantities used in UV-, visible and IR-exposure measurements


I.S. EN 13234:20062066.

Advanced technical ceramics - Mechanical properties of ceramic composites at ambienttemperature - Evaluation of the resistance to crack propagation by notch sensitivitytesting


I.S. EN 13235:20062067.

Advanced technical ceramics - Mechanical properties of ceramic composites at hightemperature under inert atmosphere - Determination of creep behaviour


I.S. EN 14476:2005+A1:20062068.

Chemical disinfectants and antiseptics - Virucidal quantitative suspension test forchemical disinfectants and antiseptics used in human medicine - Test method andrequirements (phase 2, step 1)


I.S. EN 15221-1:20062069.

Facility Management - Part 1: Terms and definitions


Date: 18/07/2018 Page

I.S. EN 15221-2:20062070.

Facility Management - Part 2: Guidance on how to prepare Facility Managementagreements


I.S. EN 2349-201:20062071.

Aerospace series - Requirements and test procedures for relays and contactors - Part201: Visual inspection


I.S. EN 2349-202:20062072.

Aerospace series - Requirements and test procedures for relays and contactors - Part202: Examination of dimensions and mass


I.S. EN 2349-301:20062073.

Aerospace series - Requirements and test procedures for relays and contactors - Part301: Pick-up and drop-out voltage


I.S. EN 2349-302:20062074.

Aerospace series - Requirements and test procedures for relays and contactors - Part302: Insulation resistance


I.S. EN 2349-303:20062075.

Aerospace series - Requirements and test procedures for relays and contactors - Part303: Dielectric strength


I.S. EN 2349-304:20062076.

Aerospace series - Requirements and test procedures for relays and contactors - Part304: Operate and release time


I.S. EN 2349-305:20062077.

Aerospace series - Requirements and test procedures for relays and contactors - Part305: Bounce time


I.S. EN 2349-306:20062078.

Aerospace series - Requirements and test procedures for relays and contactors - Part306: Overload d.c. and a.c.


I.S. EN 2349-307:20062079.

Aerospace series - Requirements and test procedures for relays and contactors - Part307: Contact voltage drop


I.S. EN 2349-308:20062080.

Aerospace series - Requirements and test procedures for relays and contactors - Part308: Coil current


I.S. EN 2349-309:20062081.

Aerospace series - Requirements and test procedures for relays and contactors - Part309: Exported spikes


Date: 18/07/2018 Page

I.S. EN 4234:20062082.

Aerospace series - Clamps, worm drive - Dimensions, masses


I.S. EN 2349-310:20062083.

Aerospace series - Requirements and test procedures for relays and contactors - Part310: Rupture


I.S. EN 2349-312:20062084.

Aerospace series - Requirements and test procedures for relays and contactors - Part312: Electrical service life - Mixed load


I.S. EN 2349-316:20062085.

Aerospace series - Requirements and test procedures for relays and contactors - Part316: Mechanical life (Endurance at reduced load)


I.S. EN 2349-317:20062086.

Aerospace series - Requirements and test procedures for relays and contactors - Part317: Service life of coil switching device


I.S. EN 2349-318:20062087.

Aerospace series - Requirements and test procedures for relays and contactors - Part318: Pick-up voltage at high temperature and drop-out voltage at low temperature


I.S. EN 2349-319:20062088.

Aerospace series - Requirements and test procedures for relays and contactors - Part319: Miss test


I.S. EN 2349-402:20062089.

Aerospace series - Requirements and test procedures for relays and contactors - Part402: Corrosion, salt spray


I.S. EN 2349-405:20062090.

Aerospace series - Requirements and test procedures for relays and contactors - Part405: Fluid resistance


I.S. EN 2349-407:20062091.

Aerospace series - Requirements and test procedures for relays and contactors - Part407: Cold/low pressure and moist heat


I.S. EN ISO 19904-1:20062092.

Petroleum and natural gas industries - Floating offshore structures - Part 1: Monohulls,semi-submersibles and spars (ISO 19904-1:2006)


I.S. EN ISO 13503-2:20062093.

Petroleum and natural gas industries - Completion fluids and materials - Part 2:Measurement of properties of proppants used in hydraulic fracturing and gravel-packingoperations (ISO 13503-2:2006)


Date: 18/07/2018 Page

I.S. EN 15034:20062094.

Heating boilers - Condensing heating boilers for fuel oil


I.S. EN 137:20062095.

Respiratory protective devices - Self-contained open-circuit compressed air breathingapparatus with full face mask - Requirements, testing, marking


I.S. EN 253:2003/A2:20062096.

District Heating Pipes - Preinsulated bonded pipe systems for directly buried hot waternetworks - Pipe assembly of steel service pipe, polyurethane thermal insulation andouter casing of polyethylene


I.S. EN ISO 13849-1:20062097.

Safety of machinery - Safety-related parts of control systems - Part 1: General principlesfor design (ISO 13849-1:2006)


I.S. EN 15063-1:20062098.

Copper and copper alloys - Determination of main constituents and impurities bywavelength dispersive X-ray fluorescence spectrometry (XRF) - Part 1: Guidelines to theroutine method


I.S. EN 15063-2:20062099.

Copper and copper alloys - Determination of main constituents and impurities bywavelength dispersive X-ray fluorescence spectrometry (XRF) - Part 2: Routine method


I.S. EN 14957:20062100.

Food processing machinery - Dishwashing machines with conveyor - Safety andhygiene requirements


I.S. EN 1496:20062101.

Personal fall protection equipment - Rescue lifting devices


I.S. EN 1498:20062102.

Personal fall protection equipment - Rescue loops


I.S. EN 14125:2004/A1:20062103.

Thermoplastic and flexible metal pipework for underground installation at petrol fillingstations


I.S. EN 14908-3:20062104.

Open Data Communication in Building Automation, Controls and Building Management -Control Network Protocol - Part 3: Power Line Channel Specification


I.S. EN 14908-4:20062105.

Open Data Communication in Building Automation, Controls and Building Management -Control Network Protocol - Part 4: IP Communication


I.S. CEN TS 15211:20062106.

Health informatics - Mapping of hierarchical message descriptions to XML


Date: 18/07/2018 Page

I.S. CEN TS 15452:20062107.

Fertilizers - Determination of chelating agents - Determination of iron chelated by o,p-EDDHA by reversed phase HPLC


I.S. CEN TS 15451:20062108.

Fertilizers - Determination of chelating agents - Determination of iron chelated byEDDHSA by ion pair chromatography


I.S. CEN TS 15213-3:20062109.

Road transport and traffic telematics - After-theft systems for the recovery of stolenvehicles - Part 3: Interface and system requirements for short range communication


I.S. CEN TS 15213-4:20062110.

Road transport and traffic telematics - After-theft systems for the recovery of stolenvehicles - Part 4: Interface and system requirements for long range communication


I.S. CEN TS 15213-5:20062111.

Road transport and traffic telematics - After-theft systems for the recovery of stolenvehicles - Part 5: Messaging interface


I.S. EN ISO 734-1:20062112.

Oilseed meals - Determination of oil content - Part 1: Extraction method with hexane (orlight petroleum) (ISO 734-1:2006)


I.S. EN ISO 20483:20062113.

Cereals and pulses - Determination of the nitrogen content and calculation of the crudeprotein content - Kjeldahl method (ISO 20483:2006)


I.S. CEN TS 15442:20062114.

Solid recovered fuels - Methods for sampling


I.S. CEN TS 15443:20062115.

Solid recovered fuels - Methods for laboratory sample preparation


I.S. CEN TR 15522-2:20062116.

Oil spill identification - Waterborne petroleum and petroleum products - Part 2: Analyticalmethodology and interpretation of results


I.S. CEN TR 15522-1:20062117.

Oil spill identification - Waterborne petroleum and petroleum products - Part 1: Sampling


I.S. EN ISO 14509-2:20062118.

Small craft - Airborne sound emitted by powered recreational craft - Part 2: Soundassessment using reference craft (ISO 14509-2:2006)


I.S. EN 1800:20062119.

Transportable gas cylinders - Acetylene cylinders - Basic requirements, definitions andtype testing


Date: 18/07/2018 Page

I.S. EN 480-1:20062120.

Admixtures for concrete, mortar and grout - Test methods - Part 1: Reference concreteand reference mortar for testing


I.S. EN 15024-2:20062121.

Copper and copper alloys - Determination of zinc content - Part 2: Flame atomicabsorption spectrometry method (FAAS)


I.S. EN 14220:20062122.

Timber and wood-based materials in external windows, external door leaves andexternal doorframes - Requirements and specifications


I.S. EN 14221:20062123.

Timber and wood-based materials in internal windows, internal door leaves and internaldoorframes - Requirements and specifications


I.S. EN 13307-1:20062124.

Timber blanks and semi-finished profiles for non-structural uses - Part 1: Requirements


I.S. EN 15033:20062125.

Room sealed storage water heaters for the production of sanitary hot water using LPGfor vehicles and boats


I.S. EN 15189:20062126.

Ductile iron pipes, fittings and accessories - External polyurethane coating for pipes -Requirements and test methods


I.S. EN 14885:20062127.

Chemical disinfectants and antiseptics - Application of European Standards for chemicaldisinfectants and antiseptics


I.S. EN 13317:2002+A1:20062128.

Tanks for transport of dangerous goods - Service equipment for tanks - Manhole coverassembly


I.S. EN 14673:20062129.

Safety of machinery - Safety requirements for hydraulically powered open die hot forgingpresses for the forging of steel and non-ferrous metals


I.S. EN 15097:20062130.

Irrigation techniques - Localised irrigation - Hydraulic evaluation


I.S. EN 61291-1:20062131.

Optical amplifiers -- Part 1: Generic specification (IEC 61291-1:2006 (EQV))


I.S. EN 62002-2:20062132.

Mobile and portable DVB-T/H radio access -- Part 2: Interface conformance testing (IEC62002-2:2005 (EQV))


Date: 18/07/2018 Page

I.S. EN 62132-1:2006/AC:20062133.

Integrated circuits - Measurement of electromagnetic immunity, 150 kHz to 1 GHz -- Part1: General conditions and definitions (IEC 62132-1:2006 (EQV))


I.S. EN 60684-3-212:2006/AC:20062134.

Flexible insulating sleeving -- Part 3: Specifications for individual types of sleeving --Sheet 212: Heat-shrinkable polyolefin sleevings (IEC 60684-3-212:2005 (EQV))


I.S. EN 50117-1:2002/A1:20062135.

Coaxial cables -- Part 1: Generic specification


I.S. CLC TR 50489:20062136.

Smart tracker chips - Feasibility study on the inclusion of RFID in Electrical andElectronic Equipment for WEEE management


I.S. EN 50116:20062137.

Information technology equipment - Routine electrical safety testing in production


I.S. EN 62271-3:20062138.

High-voltage switchgear and controlgear -- Part 3: Digital interfaces based on IEC 61850(IEC 62271-3:2006 (EQV))


I.S. EN 61290-1-1:20062139.

Optical amplifiers - Test methods -- Part 1-1: Power and gain parameters - Opticalspectrum analyzer method (IEC 61290-1-1:2006 (EQV))


I.S. EN 60870-5-104:20062140.

Telecontrol equipment and systems -- Part 5-104: Transmission protocols - Networkaccess for IEC 60870-5-101 using standard transport profiles (IEC 60870-5-104:2006(EQV))


I.S. EN 62076:20062141.

Industrial electroheating installations - Test methods for induction channel and inductioncrucible furnaces (IEC 62076:2006 (EQV))


I.S. 193:20062142.

Timber Trusses for Roofs


I.S. EN 62305-1:2006/AC:20062143.

Protection against lightning -- Part 1: General principles (IEC 62305-1:2006 (EQV))


I.S. EN 61314-1-1:20062144.

Fibre optic fan-outs -- Part 1-1: Blank detail specification (IEC 61314-1-1:2006 (EQV))


I.S. EN 61755-2-2:20062145.

Fibre optic connector optical interfaces -- Part 2-2: Optical interface standard singlemode angled physically contacting fibres (IEC 61755-2-2:2006 (EQV))


Date: 18/07/2018 Page

I.S. EN 62305-3:2006+A11:20092146.



I.S. EN 61000-4-5:20062147.

Electromagnetic compatibility (EMC) -- Part 4-5: Testing and measurement techniques -Surge immunity test (IEC 61000-4-5:2005 (EQV))


I.S. EN 60371-3-4:1995/A1:20062148.

Specification for insulating materials based on mica -- Part 3: Specifications forindividual materials -- Sheet 4: Polyester film-backed mica paper with a B-stage epoxyresin binder (IEC 60371-3-4:1992/A1:2006 (EQV))


I.S. EN 60371-3-6:1995/A1:20062149.

Specification for insulating materials based on mica -- Part 3: Specifications forindividual materials -- Sheet 6: Glass-backed mica paper with a B-stage epoxy resinbinder (IEC 60371-3-6:1992/A1:2006 (EQV))


I.S. EN 60371-3-7:1995/A1:20062150.

Specification for insulating materials based on mica -- Part 3: Specifications forindividual materials -- Sheet 7: Polyester film mica paper with an epoxy resin binder forsingle conductor taping (IEC 60371-3-7:1995/A1:2006 (EQV))


I.S. EN 60947-8:2003/A1:20062151.

Low-voltage switchgear and controlgear -- Part 8: Control units for built-in thermalprotection (PTC) for rotating electrical machines (IEC 60947-8:2003/A1:2006 (EQV))


I.S. EN ISO/IEC 17021:20062152.

Conformity assessment - Requirements for bodies providing audit and certification ofmanagement systems (ISO/IEC 17021:2006 (EQV))


I.S. EN 62305-2:2006/AC:20062153.

Protection against lightning -- Part 2: Risk management (IEC 62305-2:2006 (EQV))


I.S. EN 50214:20062154.

Flat polyvinyl chloride sheathed flexible cables


I.S. EN 61982-1:20062155.

Secondary batteries for the propulsion of electric road vehicles -- Part 1: Testparameters (IEC 61982-1:2006 (EQV))


I.S. EN 61753-101-2:20062156.

Fibre optic interconnecting devices and passive components performance standard --Part 101-2: Fibre management systems for category C - Controlled environment (IEC61753-101-2:2006 (EQV))


I.S. CLC TS 50131-4:20062157.

Alarm systems - Intrusion and hold-up systems -- Part 4: Warning devices


Date: 18/07/2018 Page

I.S. EN 61274-1-1:20062158.

Adaptors for fibre optic connectors -- Part 1-1: Blank detail specification (IEC 61274-1-1:2006 (EQV))


I.S. EN 50270:20062159.

Electromagnetic compatibility - Electrical apparatus for the detection and measurementof combustible gases, toxic gases or oxygen


I.S. EN 62040-2:2006/AC:20062160.

Uninterruptible power systems (UPS) -- Part 2: Electromagnetic compatibility (EMC)requirements (IEC 62040-2:2005 (EQV))


I.S. EN 60684-3-233:2006/AC:20062161.

Flexible insulating sleeving -- Part 3: Specifications for individual types of sleeving --Sheet 233: Heat-shrinkable fluoroelastomer sleeving, flame retarded, fluid resistant,shrink ratio 2:1 (IEC 60684-3-233:2006 (EQV))


I.S. EN 61347-2-1:2001/A1:2006/AC:20062162.

Lamp controlgear -- Part 2-1: Particular requirements for starting devices (other thanglow starters) (IEC 61347-2-1:2000/A1:2005 (EQV))


I.S. EN 61347-2-2:2001/A1:2006/AC:20062163.



I.S. EN 60904-1:20062164.

Photovoltaic devices -- Part 1: Measurement of photovoltaic current-voltagecharacteristics (IEC 60904-1:2006 (EQV))


I.S. EN 50397-1:20062165.

Covered conductors for overhead lines and the related accessories for rated voltagesabove 1 kV a.c. and not exceeding 36 kV a.c. -- Part 1: Covered conductors


I.S. EN 61300-2-14:2006/AC:20062166.

Fibre optic interconnecting devices and passive components - Basic test andmeasurement procedures -- Part 2-14: Tests - Optical power handling and damagethreshold characterization (IEC 61300-2-14:2005 (EQV))


I.S. EN 60371-3-5:2006/AC:20062167.

Insulating materials based on mica -- Part 3: Specifications for individual materials --Sheet 5: Glass-backed mica paper with an epoxy resin binder for post-impregnation(VPI) (IEC 60371-3-5:2005 (EQV))


I.S. EN 60371-3-2:2006/AC:20062168.

Insulating materials based on mica -- Part 3: Specifications for individual materials --Sheet 2: Mica paper (IEC 60371-3-2:2005 (EQV))


Date: 18/07/2018 Page

I.S. EN 61338-1-4:2006/AC:20062169.

Waveguide type dielectric resonators -- Part 1-4: General information and test conditions- Measurement method of complex relative permittivity for dielectric resonator materialsat millimetre-wave frequency (IEC 61338-1-4:2005 (EQV))


I.S. EN 60060-3:2006/AC:20062170.

High voltage test techniques -- Part 3: Definitions and requirements for on-site tests (IEC60060-3:2006 (EQV))


I.S. EN 1993-1-1:2005+NA:20072171.

Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings(Including National Annex)


I.S. EN 60745-2-18:20042172.

Hand-held motor-operated electric tools - Safety -- Part 2-18: Particular requirements ofstrapping tools (IEC 60745-2-18:2003 (MOD))


I.S. EN 62305-3:20062173.



Date: 18/07/2018 Page

IRISH STANDARDS PUBLISHED BASED ON CEN/CENELEC … · Rubber hoses and hose assemblies for...

Documents

Transcript of IRISH STANDARDS PUBLISHED BASED ON CEN/CENELEC … · Rubber hoses and hose assemblies for...