Inviting application under regularization scheme - Prasar BharatiHelp Document for Applicant...
Transcript of Inviting application under regularization scheme - Prasar BharatiHelp Document for Applicant...
-
Help Document for Applicant
Inviting application under regularization scheme
Step: 1 Read Help File.
Step: 2 Register
Step: 3 Login
Step: 4 Form fill
Step: 5 Save
Step: 6 Open drafted doc
Step: 7 Check
Step: 8 Submit
Step: 9 Status See on dash board
Step: 10 Read Circulars
Open the url https://iars.prasarbharati.org/ and click on the help.
Read once properly.
-
After reading help doc click on register.
Read the instructions and register. Your register email and password will be
your login id password.
-
After registration, login with registered id password.
After login, you will see the user dashboard.
Click on application form.
-
Pay special attention Upload the pdf file within the prescribed limit.
Do not use special character to naming of pdf file for uploading.
Use the given date format only
Fill up the form as per mentioned instructions and save.
User dashboard status after saving the form.
-
Click on drafted details and check, change, add & delete in your drafted form details.
You submit the drafted form only after checking it properly.
.
User dashboard status after submission of form.
-
आवेदक के �लए सहायता फ़ाइल
�नय�म�तकरण योजना के तहत आवेदन आमं��त करना
चरण: 1 हे�प फाइल पढ़!
चरण: 2 रिज#टर कर!
चरण: 3 लॉ&गन कर!
चरण: 4 फॉम( भर!
चरण: 5 सचंय कर!
चरण: 6 ओपन +ा,ट
चरण: 7 जाँच कर!
चरण: 8 जमा कर!
चरण: 9 ि#थ�त डशै बोड( पर देख!
चरण: 10 प4रप� पढ़!
Url https://iars.prasarbharati.org खोल! और हे�प पर ि6लक कर!।
अ9छ; तरह से हे�प फाइल पढ़! ।
-
अ9छ; तरह से हे�प फाइल पढ़ने के बाद रिज#टर पर ि6लक कर! ।
�नद
-
पजंीकरण के बाद, पजंीकृत आईडी पासवड( के साथ लॉ&गन कर!।
लॉ&गन करने के बाद, आपको आवेदक डशैबोड( @दखाई देगा।
आवेदन फॉम( पर ि6लक कर!।
Aवशषे Cयान द!
�नधा��रत सीमा के भीतर पीडीएफ फाइल अपलोड कर�।
अपलोड करने के �लए पीडीएफ फाइल के नामकरण के �लए �वशषे वण� का उपयोग न
कर�।
#दए गए #दनांक &ा'प का ह) उपयोग कर�।
बताए गए �नद
-
+ा,ट आवेदन कF ि#थ�त आवेदक डशैबोड(
-
+ा,ट Gकए गए AववरणD पर ि6लक कर! और अपने +ा,ट Gकए गए फॉम( AववरणD को
जांच!, बदल!, जोड़! और हटाएं।
आप +ा,ट .कए गए फॉम� को ठ1क से जांचने के बाद ह) सब�मट कर�।
आवेदन सब�मट करने के बाद उपयोगकता( डशैबोड( कF ि#थ�त।