INTRODUCTION TO MANUAL HANDLING

AIMS:

TO DELIVER AN OVERVEIW ON THE BASIC PRINCIPLES OF MANUAL HANDLING, EMPLOYERS LEGAL RESPONSIBILITIES AND THE RISK ASSESSMENT PROCESS WHEN CARRYING OUT TASKS.

2

INTRODUCTION

Define the term manual handling

Describe the different activities which make up manual handling

Explain how manual handling injuries make up a significant number of workplace accidents and the impact of those accidents

State the benefits to the employer when manual handling risks are controlled

State the benefits to the employee of following procedures and using lifting aids correctly.

OUTCOMES

WHAT IS MANUAL HANDLING

THE SUPPORTING AND TRANSPORTING OF A LOAD BY HAND OR BY BODILY FORCE

Lifting/Lowering

PullingPushing

Carrying

MANUAL HANDLING OPERATIONS

Time off work due to manual handling problems far outweighs any other single reason for absence at work

Targeted inspections by the enforcing authorities

HSE ‘Better Backs’ campaign.

ENFORCEMENT

Local Authority Environmental Health Officers (E.H.O):

Shops, offices, residential homes, warehousing, entertainment

Health and Safety Executive (H.S.E. Safety Officer):

Factories, hospitals, nursing homes, mines, schools, construction etc.

WHAT ARE THE BENEFITS OF CONTROLLING MANUAL HANDLING RISKS FOR A BUSINESS?

1. Maintain production/contracts2. Maintain quality of products3. Maintain or reduce insurance costs4. If manual handling risks are not properly controlled the employer may have:

Retraining costs

Wage and overtime costs

Loss of reputation with customers

Adverse publicity/prosecution and Civil liability.

WHAT ARE THE BENEFITS OF USING LIFTING AIDS AND CORRECT TECHNIQUES FOR EMPLOYEES?

1. Avoid injury

2. Avoid pain, suffering and stress for the employee and their family

3. Prevent loss/reduction in earnings If you are injured it may affect your:

Lifestyle

Leisure activities

Ability to sleep

Job prospects.

LEGAL RESPONSIBILITIES

OUTCOMES

State how the Health and Safety at Work Act 1974 and the Management of Health and Safety at Work Regulations 1999 impact on manual handling operations

List the general duties of the employer, employee and the self-employed under the Manual Handling Operations Regulations 1992

Describe where advice, guidance and information can be found to assist in reducing manual handling risks.

‘HEALTH AND SAFETY AT WORK ETC ACT, 1974’

12

Duties of Employers:

‘the general duty imposed on all employers is to ensure, as far as reasonably practicable, the health, safety and welfare at work of all their employees.’

Duties of Employees:

'employees must take reasonable care for the health and safety of themselves and of other persons who may be affected by what they do or fail to do at work-

their acts and omissions.'

Employers and employees who fail to comply with any of the duties described in the Act make themselves liable to be prosecuted in the courts.

HEALTH & SAFETY AT WORK ACT 1974

provide and maintain safe equipment and systems of work provide safe systems of work provide information, instruction, supervision and training provide a safe place of work provide a safe working environment consult employees have a health & safety policy (written when there are 5 or more employees).

EMPLOYER MUST:

EMPLOYEES RESPONSIBILITIES

Cooperate with the employer

Take reasonable care of themselves and others

Do not alter equipment provided and use as instructed

Report any faults or defects and any hazardous handling activities.

Health And Safety At Work Act (H.A.S.A.W.A) 1974Management of Health & Safety at Work Regulations (M.H.S.W.R.) 1999

Manual Handling Operations Regulations (M.H.O.R.)1992

MANAGEMENT OF HEALTH & SAFETY AT WORK REGULATIONS 1999

Employers must take into account the capability of any employee before giving them a task to complete.

CAPABILITY OF EMPLOYEES

MANAGEMENT OF HEALTH & SAFETY AT WORK REGULATIONS 1999

Employers must ensure that employees are provided with adequate health & safety training

1. On recruitment

2. On being exposed to increased risk

3. On a change of job or equipment

4. From time to time (refresher training)

TRAINING OF EMPLOYEES

17

Lifting Operations and Lifting Equipment Regulations 1998

Employers are required to ensure that every lifting operation involving lifting equipment is properly planned by a ‘competent person’ appropriately supervised and conducted in a safe manner

Any person involved in planning a manual handling task should have adequate practical and theoretical knowledge and experience.

All Equipment defects must be reported.

All records and examinations of equipment should be kept for inspection

‘PROVISION AND USE OF WORKEQUIPMENT REGULATIONS (P.U.W.E.R)

18

Covers all equipment used at work. They impose a range of duties concerning matters such as;

Employers providing suitable work equipment (Regulation 4)

Employers providing information, instruction and training for people who use the equipment. (Regulation 9)

Equipment being in good repair and regularly inspected, with records of the inspections kept (Regulation 3)

PROVISION AND USE OF WORK EQUIPMENT REGULATIONS ( P.U.W.E.R. )

SUITABILITY OF WORK EQUIPMENT:

1. Has to be constructed or adapted so that it is suitable for its purpose

2. It has to be selected with the conditions of use and the users health and safety in mind

3. It may only be used for operations for which and under conditions for which it is suitable

19

PROVISION AND USE OF WORK EQUIPMENT REGULATIONS ( P.U.W.E.R. )

Maintenance:

The regulations set out the general requirements in order to keep work equipment maintained in:

1.An efficient state

2.Efficient working order

3.Good repair

20

PROVISION AND USE OF WORK EQUIPMENT REGULATIONS ( P.U.W.E.R. )

Information, Instruction and Training

Persons who are using the equipment they must have adequate:

1.Health and Safety Information.

2.Where appropriate, written instructions about the use of the equipment.

3.Training for Health and Safety in methods which should be adopted when using the equipment and any hazards and precautions which should be taken to reduce risks.

21

MANUAL HANDLING HAZARDS

HSE STATISTICS - MANUAL HANDLING INJURIES

BACK

Finger/Thumb

Arm

Hand/Wrist

Lower Limb

Rest of TorsoOther 3 %

49 %

14 %

10 %

9 %

8 %

7 %

24

Poor Posture

Faulty body mechanics

Stressful living & working habits

Loss of flexibility

Poor physical condition

HIGH RISK ACTIVITIES

TOP HEAVY BENDING

HOLDING AWAY FROM TRUNK.REACHING

HIGH-RISK ACTIVITIES

POOR POSTURE.TWISTINGSEATED & STOOPED

STRETCHING UPWARDS

MODULE 4MANUAL HANDLING

ASSESSMENTS

28

Avoiding a hazardous manual handling situation is preferable.A

A

R

R

void

ssess

educe

eview Risk Assessments should be reviewed when changes occur.

By following the Risk Assessment you are reducing the risk of injury to all persons involved. Training of staff in safer handling techniques, introducing appropriate handling aids and changing work patterns will all help reduce the risk. *

Avoidance is not possible, making a ‘suitable and sufficient’ assessment of the hazards is the next step.

HEIRARCHY OF CONTROL MEASURES

RISK MATRIX Slightly Harmful(requiring first aid)

Harmful(resulting in time off

work)

Extremely Harmful(causing major injury

or death)

HighlyUnlikely Trivial Risk Tolerable Risk Moderate Risk

Unlikely(could occur sometime)

Tolerable Risk Moderate Risk Substantial Risk

Likely(not surprised

if it did happen)Moderate Risk Substantial Risk Intolerable Risk

Action Required

Tolerable Risk:monitor compliance

Moderate Risk:plan control measures

Substantial Risk:take urgent steps

Intolerable Risk:stop

L OADI NDIVIDUALTASKENVIRONMENT

30

Weight ?

Difficult to manage ?

likely to move unexpectedly ?

Communication ?

Capabilities ?

Injuries to be aware of ?

LOAD

WHAT WOULD YOU NEED TO KNOW BEFORE MOVING ?

INDIVIDUAL (YOUR CAPABILITY)

Are you fit enough? (fatigue level)

Any past / present injuries to consider?

Have you been trained with this load?

Are you pregnant?

Do you need particular strength or other physical requirement?

What do you need to consider about YOURSELF before carrying out manual handling?

Introducing unsatisfactory body movements i.e. Twisting, reaching upwards or stooping?

Excessive lifting distances?

Frequent or prolonged physical effort?

TASK

WHAT YOU NEED TO KNOW BEFORE ATTEMPTING IT

ENVIRONMENT

space constraints preventing good posture?

floors which are uneven, slippery or unstable?

obstructed floors and traffic routes?

extremely hot or cold working conditions?

poor lighting conditions?

What you should know before Manual Handling

EQUIPMENT AND WORK ORGANISATION

Is movement hindered by work equipment?

Is the work equipment being used unsuitable?

Is movement hindered by personal protective equipment?

Is the job boring?

Is the job repetitive?

OTHER FACTORS to be consider before Manual Handling

3 KEY PRINCIPLES OF SAFE MANUAL HANDLING

Maintain a Natural Upright Posture

Adopt aStable Base

Keep the Load as Close as necessary.

1

2

3

SAFE LIFTING

Warming up

Is help needed?

Plan

Clothing

Grip

Repetitive strain injuries

Storage.

THINKTHINK BEFORE BEFORE YOU STARTYOU START

SAFE LIFTING TECHNIQUE

STOP AND THINK.

Step 1

SAFE LIFTING TECHNIQUE

POSITION THE FEET.

Step 2

SAFE LIFTING TECHNIQUE

BEND THE KNEES.

Step 3

SAFE LIFTING TECHNIQUE

Lift with a firm grip and straight back.

Step 4

SAFE LIFTING TECHNIQUE

RAISE THE LOAD WITH THE LEGS.

Step 5

SAFE LIFTING TECHNIQUE

KEEP THE LOAD CLOSE TO THE BODY.

Step 6

CARRYING AND UNLOADING

Close to body

Change of grip

No twisting

Look

Do not obstruct vision

Mechanical aids.

PUSHING AND PULLING

TIPS WHEN PUSHING AND PULLING

Use handling aids with handles between the shoulder and waist

Ensure the movement is within individual capability

Make efforts to remove the need to push or pull on slopes either up or down

Manage uneven surfaces

Maintain correct stance

Maintain correct pace.

MANUAL HANDLING EQUIPMENT

MANUAL HANDLING EQUIPMENT

THANK YOU FOR LISTENING

Neil Johnson

Company Director

Mobile: 07511153083

Email: n.johnson330@btinternet.com