INNOVATION SCIENCE & TECHNOLOGY …dstisted-ner.in/Doc/Completion-Report_2015-16.pdf · INNOVATION...

INNOVATION SCIENCE & TECHNOLOGY ENTREPRENEURSHIP DEVELOPMENT (i-STED) PROJECT – NER

2nd YEAR COMPLETION REPORT OF i-STED.

[APRIL 2015 – MARCH 2016]

Submitted to:

National Science & Technology Entrepreneurship Development Board

Department of Science & Technology, Govt. of India New Delhi

Submitted by:

Entrepreneurship Development Institute of India

Ahmedabad

C O N T E N T S

Sl. No. Subject Page No.

1. PROFORMA – I: Consolidated Annual Progress 4

i-STED Location Date of Sanction of the Project No. of Units Launched / Jobs Generated Linkages Established Innovative / Knowledge-based / Technology Oriented

Units Promoted Other Special Features

2. PROFORMA – II: Details of units Launched 7

Name of Entrepreneur Name of Enterprise Address, Phone/Mobile No. Project Cost Funding

Own (Rs.) Loan (Rs.)

Income per Month No. of Employee Contribution of i-STED Project and Extent of S&T Input Photograph of the Unit

3. PROFORMA – III: Data for Analysis 61

Units Launched Sector wise Units Launched Investment wise Source of Fund Source of Loan Units Launched Age wise Units Launched Category wise Units Launched Gender wise

4. Annexure–I: i) Planned vs. actual activities carried out for popularization, capacity building and sensitizing new-entrepreneurs during this one year period

ii) Details of projection vs. achievements

iii) Actual Position at the end of Second year of the Project

iv) Target Set for Years 2 to 5

v) Mapping done to identify potential region as well as technology sectors for new S&T entrepreneurship development program

3

Annexure-II (A): Technology Acquired/Propagated/Demonstrated During 2015-16/ (IInd Year)

II (B): Machineries to be acquired for 2016-17.

Annexure – III: Minutes of Guidance cum Monitoring meeting of i-STED.

4

INNOVATION SCIENCE & TECHNOLOGY ENTREPRENEURSHIP DEVELOPMENT [i-STED-PROJECT]

1. PROFORMA – I : CONSOLIDATED ANNUAL PROGRESS

i-STED LOCATION: NER

DATE OF SANCTION OF THE PROJECT : 1st April, 2014 NO. OF UNITS LAUNCHED/JOBS GENERATED

Year - I Year - II Year - III Year - IV TOTAL (Cumulative)

Units Launched

11 47 Not Applicable

Not Applicable

58

Jobs Generated

93 144 Not Applicable

Not Applicable

237

Linkages established: The i-STED project in NER implemented by EDI has established various types of linkages between the entrepreneurs and support institutions. Following are the highlights of the linkages established:

Technology Related

Technology Inputs provided by IICPT, NSIC, ICAR, CBTC, Guru Nanak Mechanical Works Ltd. , NB Institute of Rural Technology (NBIRT), SELCO Pvt. Ltd., Bangalore.

Credit related

Nationalised Banks Like IDBI, SBI, UBI, AGVP for procuring SME Loans under Mudra and other schemes like Stand up India.

MOU has been signed with Bharatiya Yuva Shakti Trust (BYST) for hand holding support and bank linkages of the trained entrepreneurs of i-STED project. BYST has MOU with leading banks like BOB, SBI, AGVB etc.

Support Institutions:

Food Processing

Indian Institute of Crop Processing Technology, (IICPT), Regional centre, Guwahati, under Ministry of Food Processing Industries, Govt of India.

Indian Council of Agricultural Research (ICAR) an Autonomous body under Department of Agricultural Research & Education, Ministry of Agriculture, Govt. of India.

National Small Industries Corporation (NSIC) under Ministry of Micro Small & Medium Enterprises (MSME). Govt. of India.

5

Cane & Bamboo Cane & Bamboo Technology Centre, Guwahati (CBTC) under North East

Council, Govt. of India.

Guru Nanak Mechanical Works Pvt. Ltd. Tinisukia, Assam.

RENEWABLE ENERGY (SOLAR)

Assam Energy Development Agency (AEDA) under Ministry of Non Conventional Energy Sources, Govt of India.

NB Institute of Rural Technology (NBIRT), Guwahati.

SELCO Pvt. Ltd., Bangalore.

Innovative/ Knowledge-Based/ Technology oriented units promoted : (Although all the documented cases are based on innovation/ knowledge/ technology, the following few are worth mentioning as special category)

Food Processing: The promoters of M/s Karan Industries, Goreswar,

Baksa, Assam; M/s Deka Rice Mill, Maharipara, Baksa, Assam; M/s Jeuty Food Products, Morigaon, Assam, were self motivated to install modern oil expeller cum filtration unit when they were taken for technical exposure visit to Ahmedabad under i-STED Project . Similarly M/s Urbashi Mill, Goreswar, Baksa, Assam also installed a modern beaten rice making Machine after the exposure visit.

Cane & Bamboo : M/s Ghosh Furniture House, Balipara, Tezpur, Assam &

M/s Bamboo Style, Barpeta Town, Assam has adopted and introduced modern technology like grinding, polishing, organic pest treatment & innovative product making which was provided by Cane & Bamboo Technology Centre, Burnihat (CBTC)

Solar Sector: M/s Puhor, Mangaldoi, Assam, promoted by Ms Rajashree Anil was able to take advantage of seed funding from SELCO Incubation Centre. Having gone through technical exposure on configuration, installation & servicing of solar home lighting systems of different dimensions, they have replicated the same in Mangaldoi district of Assam Also, M/s Hills Solar Power a partnership firm of Shri Har singh & Joy Singh Terron, got similar facilities to propagate solar home lighting system in Karbi -Anlong district of Assam.

Other special features :

A team of Entrepreneurs in food processing sector were taken to Ahmedabad for exposure on latest technology in their area of interest (Rice, Oil, Bakery etc) & availability of Machines in related field.

6

For Cane & Bamboo sector, introduction of mechanical Incense Stick Making Machines, Electric Operated Sanding Machine, Grinder Machine, Cutting Machine etc.

Introduction of organic pest treatment of Cane & Bamboo.

For Renewable sector (solar), entrepreneurs identified under i-sted project were given linkages to AEDA for local support. A few selected ones were further linked to SELCO Bangalore for incubation in addition to getting guidance from SELCO professionals, at EDI Guwahati. Six Entrepreneurs from Assam were taken to SELCO Incubation Centre in Bangalore for Technical Exposure .They were also given hands on training at RRTC Meghalaya.

7

2. PROFORMA – II: DETAILS OF UNIT LAUNCHED

A. Renewable Sector (Solar - 7 units)

Case No-1(New) Name of the Entrepreneur: Ms. Rajashree Anil

Name of the Enterprise: M/s PUHOR – A Solar sales, installation, assembling and servicing unit. The unit is dealing with solar home lighting system, solar water heater, solar motor pump, solar street light, solar mobile phone charger etc.

Address: Hengrabari, Directorate of Family Welfare & Health Office Road, Guwahati, Kamrup (Metro), Assam

Category General

Phone /Mobile No.: 08811830191 (M)

Project Cost: Rs 3.00 Lakh

Funding:

Seed capital Rs.1.98 Lakh received from Selco Foundation

Own Rs 1.02 lakh

Income per month: Rs. 10,000/-

No. of Employee: 3

Contribution of EDI: In the year 2015, Rajshree Anil, age-34, residing at Guwahati joined an Entrepreneurship Development Programme conducted by EDI at Guwahati under i-STED Project. Amongst the three sectors, Rajashree showed her interest in renewable energy (solar).Hailing from Mangaldoi, she saw lot of prospects of introducing solar power in that area particularly in home lighting and water pumps.

Seeing her enthusiasm and professionalism, EDI linked her up with Selco Foundation, Bangalore for further exposure and incubation support. Rajashree was sent to Bangalore to attend a 3- day workshop at Selco Foundation to know the knitty-gritty of solar business. Thereafter EDI team had helped her prepare Business Plan, she attended a technical training at RRTC, Meghalaya conducted by Selco. On the merit of her business plan, Rajashree was supported by Selco with seed funding of Rs1.98 lakhs to promote her business. This led Rajashree to create ‘PUHOR’ meaning light a Firm registered in Mangaldoi to carry forward her business in August 2015.Puhor installed the 1st street light in Bihdia Bazar Chowk funded by Mangaldoi Municipality Board. It was the starting point and thereafter she has installed a number of home lighting systems in various other locations.

8

Rajashree conducted a number of awareness programmes amongst potential users with live demonstration. Currently she integrates, assembles and installs various systems as per need of customers. EDI has also given a linkage to her with CII-BYST for further support like bank linkage. Rajashree was selected as one of the ten best entrepreneurs in the BYST Business Plan Competition and awarded a Certificate of Merit. Rajashree is networking with different institutions like Municipality Boards, Police, NEC etc for integration and installation of various solar systems like home lighting, street lighting etc. She has also approached IDBI Bank for expansion of her business. Presently she has been installing 2-4 systems a month with an average income of Rs10, 000/- by employing one person directly. She is B.A.Passed. Outcome:

Creation of new unit Annual Turnover: Rs 3.84 Lakh

Photographs of Enterprise:

Office of PUHOR:

Home lighting system installation by PUHOR:

9

Case No- 2 (New)

Name of the Entrepreneur: Sri Joysing Teron (Age; 32 yrs.; B.A.Passed) and Sri Harsing Teron (Age: 40 yrs.; H.S.Passed).

Name of the Enterprise: M/s HILLS SOLAR POWER, HAMREN- A partnership firm on solar sales, assembling, installation and servicing centre. The unit is dealing with solar home lighting system, solar water heater, mobile charger etc.

Address: Hamren New Market Area, Town Committee Bldg.,Karbi-Anglong, Assam Category: ST Phone / Mobile No.: Mr. Joysing Teron – 8014594710 (M) Mr Horsing Teron – 9577772060(M) Project Cost: Rs 2.50 Lakh Funding: Seed capital Rs.1.98 Lakh received from Selco Foundation Own Rs 1.02 lakh Income per month: Rs.14, 000/- per month No. of Employee: 2

Contribution of EDI: Sri Joysing Teron, age - 32 and Sri Harsing Teron, age - 40 are not relatives-while Joysing hails from Langmoukwai village, Harsingh belongs to Dongkamukha village in Karbi Anglong district of Assam. Both came to attend a solar technician training programme at NB Institute of Rural Technology(NBIRT),Guwahati co-sponsored by EDI under i-STED from 2nd to 8th November2014.Thereafter they were selected by EDI for further counseling and grooming to set up their solar enterprise in Karbi Anglong .The road to grounding their enterprise has not been smooth. Karbi Anglong is one of the most backward districts of Assam with poor communication and characterized by frequent bandhs. There is hardly any internet connectivity and getting connected with them was itself a big challenge. However inspite of all these deterrents, both were sent to Selco Incubation Centre in Bangalore to attend a 3days Orientation cum exposure training from 7th to 9th January 2015.This was followed by a 9 days training on solar system sales, demonstration and installation in Bangalore. After coming back, EDI gave them handholding support to create a partnership firm, get registered and also made a business plan. Even EDI has also selected both of them to attend 3-Days Technical Training on Solar Energy System at EDII under i-STED Project. During the training period EDII has provided all the inputs to set up business unit and its documentation part. In this connection EDI has also provided information to prepare a partnership deed and finally it was executed by both Joysing and Harsing in the name of Hills Solar Power on 25th May 2015 and got the Trade License on 14th August 2015 Town Council.

10

EDI also has guided then to make a linkages with nearest banks for their future development of business and after opening a bank account on Langpi Dehangi Rural Bank at Hamren, Hills Solar Power received a seed capital grant of Rs 1.98 lakhs from Selco Foundation to kick start their venture since Selco has shown interest to provide handholding support to them after having linkages with EDI’s support. The firm has its office located at Hamren New Market. Both the partners man the office in turn and go for demonstration and booking of orders in different villages. Till date, they have assembled and installed 20 home lighting systems of different capacities as per demand of customers in different places of Karbi-Anglong and earning as an average net income of Rs.14, 000/-per month.

Outcome:


Photograph of enterprise: Few photographs of installation of solar home lighting system at customer’s door step by Hills Solar Power (Joysing Teron & Horsing Teron) at Hamren, Karbi-Anglong:

11

Case No- 3(New) Name of the Entrepreneur: Abdul Hekim

Name of the Enterprise: M/S SUMIYA ELECTRICALS – A solar &

electrical items sales,assembling,installation

and servicing centre.

Address: Baghtari, Mangaldai (Near Kharupetia Bus

Stand Market Place), Darang Dist., Assam.

Category: Minority

Phone / Mobile No.: 9854312352 (M).

Project Cost: Rs 1.00 Lakh

Funding: Own finance

Income per month: Rs. 10,000/- per month

No. of Employee: 1

Contribution of EDI: Abdul Hekim, age 42 (23.03.1973), H.S.Passed, is an EDP trained entrepreneur under i-STED Project, NER. As part of his training programme, he had selected a project to launch a sales & servicing unit of solar items as he was already in electrical business. During this EDP Training EDI has sent one expert of Solar Technology from AEDA of Guwahati and also convened 2 nos. meeting with Selco Officials/Technical Experts on Solar Energy System at EDI-NER Office, Guwahati for establishing good linkages between Selco and entrepreneurs on solar sector; so that entrepreneurs get more information about solar business from expert. In this connection, EDI had organised one 3-Days Technical Training on Solar Energy System under the skill training component of i-STED Project at Mangaldai of Darrang District of Assam and during this training Abdul Hekim learnt about how to install and integrate solar system for home lighting. Shri Hekim also got training on fault finding and repairing by the expert hired from Assam Energy Development Authority of Assam (AEDA), Guwahati during training programme. EDI has made a very good linkage with Bandhan Bank of Mangaldai Branch and bank is interested in giving him financial support to upgrade his solar unit. Apart from this EDI has also made a linkage with Selco Incubation Centre for up gradation of entrepreneur’s technical know-how on solar energy system through training since this Selco is an R & D Organisation on solar sector and Selco is performing their role on it as per requirements of our entrepreneurs till date.

Before attending the EDP, Shri Hekim was operating his electrical business as an electrician from home on call basis, but currently ha has started his showroom at Baghtari area of Mangaldai, attending to various customers in Baghtari area of Mangaldai for installation, repair and maintenance of solar home lighting systems. Presently his monthly sales realization/turnover on solar business is Rs. 60-70 thousand on an average.

12

Outcome:


Photographs of unit launched:

13

Case No- 4 (New) Name of the Entrepreneur: Nur Jamal

Name of the Enterprise: M/S N.J.SOLAR STORE– A solar & sales,

assembling, installation and servicing centre.

Address: Asintala, Kharupetia, Darrang Dist.of Assam.

Category Minority

Phone / Mobile No. 7662859265 (M).

Project Cost Rs 1.00 Lacs

Funding Own finance

Income per month Rs. 10, 000/- per month

No. of Employee 1

Contribution of EDI: Shri Nur Jamal, aged 30, class-VII passed, is an EDP trained entrepreneur under i-STED Project, NER. When EDI has organised one EDP under i-STED Project at Kharupetia; as part of his training programme, he had selected a project to launch a sales & servicing unit of solar items. During this EDP Training EDI has sent one expert of Solar Technology from AEDA of Guwahati to provide information about the opportunity of solar business and its benefits in the society. To make a good linkages EDI has convened 2 nos. meeting with Selco Officials/Technical Experts on Solar Energy System at EDI-NER Office, Guwahati for establishing good linkages between Selco and few trained entrepreneurs on solar sector; so that entrepreneurs get more information about solar business from expert which was attended by Shri Nur Jamal. In the technical training programme, Nur Jamal had learnt about how to install and integrate solar system for home lighting, solar water heater and solar motor pump etc. He also had learnt how to check to find out fault in battery cell & panel and how to do the repairing & maintenance services on it by the expert hired from Assam Energy Development Authority of Assam (AEDA), Guwahati during training programme. After completion of the training EDI has made linkage with United Bank India, Kharupetia Branch and the bank is interested in giving him financial assistance to expand his solar business if the entrepreneur could continue maintain the business relationship with this bank. Before coming to attend the EDP and Technical Training under i-STED, Mr. Jamal was doing some flying business from his house on some electronics items. But after attending the EDI’s Training pogramme Jamal is attending various customers in Asintala area of Kharupetia for installation, repairing and maintenance of solar home lighting system, water pump etc. Thus in this way he launched his business unit in an organsied way as solar sales, assembling, installation and servicing centre at Asintala of Kharupetia. Now he is getting a very good market demand from customers in his Asintala area. His business unit is situated at his own land/home situated in Asintala of Kharupetia. Outcome:


14


15

Case No – 5 (New)

Name of the Entrepreneur: Keramat Ali

Name of the Enterprise: M/s Masud Electronics and Solar House

– A solar & electrical items sales, assembling,

installation and servicing centre.

Address: Asintala Market of Kharupetia, Darang Dist.,

Assam.

Category: Minority

Phone / Mobile No: 9706858321 (M).

Project Cost: Rs 1.00Lakh

Funding: Own finance.

Income per month: Rs. 10,000/- per month

No. of Employee: 1

Contribution of EDI: Shri Keramat Ali, age 33, class-viii passed, is an EDP trained entrepreneur under i-STED Project, NER. As part of his training programme, he had selected a project to launch a sales & servicing unit of solar items as he was doing electrical items business as an electrician. During this EDP Training EDI has sent one expert of Solar Technology from AEDA of Guwahati and also convened 2 nos. meeting with Selco Officials/Technical Experts on Solar Energy System at EDI-NER Office, Guwahati for establishing good linkages between Selco and entrepreneurs on solar sector; so that entrepreneurs get more information about solar business from expert. In this connection, EDI had organised one 3-Days Technical Training on Solar Energy System under the skill training component of i-STED Project at Mangaldai of Darrang District of Assam and during this training Shri Ali has learnt about how to install and integrate the system for home lighting system including maintenance of battery and fans equally etc. He also has learnt how to find out fault in battery & panel and how to do the repairing on it by the expert hired from Assam Energy Development Authority of Assam (AEDA), Guwahati during training programme. EDI has made linkage with UCO Bank of Kharupetia Branch and bank has shown their interest too in giving him financial assistance to expand his solar business. The entrepreneur has already 1SB A/c under UCO Bank of Kharupetia Branch.

EDI also provided direct linkages to Keramat Ali as trained entrepreneur with Selco Incubation Centre of Bangalore and ASTEC/AEDA of Guwahati to get more back-up support on technical side and now he is getting frequent advice on technical ground from Selco & AEDA and EDI is providing technique/strategy for his market development. EDI also has provided linkages with DICC- Mangaldai Branch for getting registration and support, and provided information and procedure for procuring all business related documents like; Trade Liscence, EM-I & II etc and he has already started his process to apply for it.

16

In this way when he launched his small unit in an organsied way as a solar & electrical items sales, assembling, installation and servicing unit at Asintala and he is getting a very good market demand from customers in this area of Kharupetia. His business unit is situated at his rented land/house and he has got house rent agreement also from landlord. He also has engaged one assistant employee in his business for servicing & maintenance purpose. Outcome:


Photograph of enterprise:

17

Case No – 6 (New)

Name of the Entrepreneur: Abdus Salam

Name of the Enterprise: M/s Shahil Enterprise (solar house) - All

Kinds of solar panel & battery, home lighting

system, mobile charger, lED Lights, Fans

etc.sales, assembling, installation, servicing and

maintenance unit.

Address: Nalbari Town, Dhamdhama Road,

(Near Guwahati Bus Stand Market Area,

Nalbari, Assam.

Category: Minority


Project Cost: Rs 2.00 Lacs

Funding: Own source

Income per month: Rs. 16,000/-per month

No. of Employee: 4

Contribution of EDI: Shri Abdus Salam, aged 42, H.S.Passed, is an identified entrepreneur through one EAP and EDP under i-STED Project of EDII at Nalbari during 2015-16. He participated and completed it successfully. As part of his training programme, he had selected a project to launch a sales, supply & servicing unit of solar products like panels, battery, home lighting system, DC Fans, LED Lights and Water Pump etc. During this EDP Training EDI has specially sent one expert on Solar Technology from AEDA of Guwahati to give the inputs on business opportunity on solar sector. In this connection EDI also has convened 2 nos. meeting with Selco Officials/Technical Experts on Solar Energy System at EDI-NER Office, Guwahati for establishing good linkages between Selco and entrepreneurs on solar sector; so that entrepreneurs get clear and more information about solar business from expert to develop the business as per market demand. After identification of entrepreneurs from EDP, EDI had organised one 3-Days Technical Training on Solar Energy System under the skill training component of i-STED Project at Mangaldai of Darrang District of Assam and during this training Abdul Salam had learnt about how to install and integrate solar home lighting system, solar water pump etc. He also has learnt how to find out fault in damaged cell of battery & panels and how to do the maintenance service on it by the expert that hired from Assam Energy Development Authority of Assam (AEDA), Guwahati during technical training programme. EDI has made linkage with Allahabad Bank of Nalbari Branch. Bank is also interested in giving him financial support/assistance to expand his solar business in Assam. The entrepreneur has already 1SB A/c under Allahabad Bank of Nalbari Branch. Even EDI has sent one technical expert from EDI-Ahmedabad Office to see his business feasibility as well as to guide him in developing his solar base business.

18

EDI also has provided linkages with DICC- Nalbari Branch for information and procedure of business related documents like; Trade Liscence, EM-I & II under DICC etc. that already applied by the entrepreneur after getting the idea/guidance from EDII. Before attending the EDI’s Training, the entrepreneur was doing supply business with other government department for supplying office stationary and also partly involved in his own agricultural activity at home; but after attending all trainings of EDI under i-STED Project he understood about how to start a solar base sales & servicing business and started it. Thus, in this way, now he launched his solar business at Nalbari covering 3-4 districts of Assam to supply solar products as per customer’s order/requirement through his network. Now he is getting a very good market demand from customers of 3-4 districts(Nalbari+Barpeta+Darrang+Kamrup) of Assam by employing 4-people to look after the assembling, installation, servicing and maintenance works at customers door step as per requirement. His solar base business unit is situated at rented house. Outcome:



19

Case No – 7(New) Name of the Entrepreneur: Md. Haidar Ali

Name of the Enterprise: Ms/ Mehetaz Solar House - A solar items

sales, assembling, installation and servicing

centre.

Address: Gadhoa Ghatpar Bazar, Sapori, Under Pub-

Mangaldai Devt.Block, Mangaldai, Darang Dist.,

Assam.

Category: Minority


Project Cost: Rs 1.50 Lacs

Funding: Own source (Self)

Income per month: Rs. 10,000/-per month

No. of Employee: 2

Contribution of EDI: Shri Haidar Ali, aged- 25, H.S.Passed, is an EDP trained entrepreneur under i-STED Project, NER organised at Kharupetia. As part of his training programme, he had selected a project to launch a sales & servicing unit of solar items as he was an electrician in his locality. During this EDP Training EDI has sent one expert of Solar Technology from AEDA of Guwahati since most of the participants have shown interest on solar sector when EDI counseled them. and EDI also convened 2 nos. meeting with Selco Officials/Technical Experts on Solar Energy System at EDI-NER Office, Guwahati for establishing good linkages between Selco and entrepreneurs on solar sector; so that entrepreneurs get more information about solar business from expert as and when necessary. After completion of EDP, EDI had organised one 3-Days Technical Training on Solar Energy System under the skill training component of i-STED Project at Mangaldai of Darrang District of Assam and during this training Haidar Ali learnt about how to install and integrate the solar system including panel, battery and lights etc. He also has learnt how to find out fault in battery & panel and how to do the repairing on it. EDI has made a very good linkage with Indian Bank of Mangaldai Branch and the entrepreneur has opened one Saving Bank A/c and one Current Bank A/c under this Indian Bank after getting the business idea from EDII. Bank has also shown interested in giving him financial support to upgrade his solar business. The entrepreneur has already launched his solar business in Gadhoa Ghatpar area of Mangaldai and to launch the solar business unit he has spent around 1.5 Lacs.

EDI provided linkages with Selco Incubation Centre of Bangalore and ASTEC/AEDA of Guwahati to get more back-up support on technical side from Selco as well as AEDA so that entrepreneurs get good response from market. EDI also has provided linkages with DICC- Mangaldai Branch for getting registration and support, and provided information

20

and procedure for procuring all business related documents like; Trade Liscence etc. But after completion of training programme he has been procured his Trade Liscence / No Objection Certificate (NOC) from Gaon Panchayat. His business unit is situated at his own land/home. Outcome:



21

3. B. Food Processing Sector (20 Units) Case No.1 (New)

Name of the Entrepreneur: Mrs. Illa Moni Bora

Name of the Enterprise: M/s Trinayan Gramin Food Products

Address: Vill.- Jagi P.O. – Jagi,Dist- Morigaon, Assam, Pin- 782411

Category: OBC

Phone /Mobile No.: 09435893445

Project Cost: Rs 12, 00,000/-

Funding:

Own: 5, 00,000/-

Bank: 5, 00,000/-

Other: 2, 00,000/-


No. of Employee: 8

Contribution of I-STED Project: Mrs. Illa Moni Bora,Age-40, was engaged in processing as part time activity in a small way. She then attended one EDP conducted at Morigaon under i-STED Project. She decided to take up the food Processing activity as a commercial activity. Her Unit was registered with DI & CC Morigaon & she was guided to get food safety license. She has constructed her factory in aseptic condition, installing modern tools & equipments like packaging Machines both for bottles & plastic bags, hot gun for juice extraction etc. She was also given bank linkages & she got a loan from Union Bank. DI &CC, Morigaon also sanctioned a subsidy for her unit. Mrs. Illamoni Bora also attended a technical training Programme on pickle making at IICPT, Guwahati under i-STED project. Currently she is producing a number of items like juice etc. under the brand name “RUCHI”. Outcome:

Creation of new unit Annual Turnover: Rs 48 lakh

Photographs of the unit

22

Case No.2 (New) Name of the Entrepreneur: Mr. Ramen Kanta Das

Name of the Enterprise: M/s Karan Industry

Address: Vill.- No 2 Goreswar P.O. – Goreswar, Dist- Baksa, Assam, Pin- 781366

Category: OBC


Project Cost: Rs.18, 00,000/-

Funding:

Own finance: 500,000/-

Other: 12, 00,000/-


No. of Employee: 6

Contribution of I-STED Project: Mr. Ramen Kanta Das, Age 36, HS passed is an EDP trained entrepreneur under i-STED Project, NER. Raman Kanta Das is the youngest of three brothers and was engaged in family rice milling business by his father Lt. Dharini Kanta Das. The operation was traditional & there was no awareness or knowledge on modernisation/technology upgradation/diversification. Shri Das attended an EDP at Goreswar under i-STED Project. There he got the idea of modernization/diversification of family business. EDI arranged a visit by Dr. Jagmohan of IICPT who gave hand holding support on process development. This was again followed up by Sri KK Saw who advised Machine improvement through addition of small attachments. Sri Das was taken to Ahmedabad for an exposure trip where he got the chance to see modern mustard oil extraction plant. After coming back , he was given constant support to diversify into mustard oil extraction unit. He was given linkage with IDBI bank for diversification of the project. But since documentation took time and he is yet to get bank support, he did not hesitate to put all his savings and also borrowing funds from private sources to kick start the project. Finally he procured a modern Machine from Rajkot of Gujarat and started operating a modern mustard oil extraction unit at Goreswar from Dec.2015. Outcome:

Creation of new unit Annual turnover: Rs 60 Lacs

Photographs of the unit:

23

Case No.3 (Existing)

Name of the Entrepreneur: Mr. Anup Modak

Name of the Enterprise: M/S Modak Bakery

Address: Vill.- No 2 Goreswar P.O. – Goreswar, Dist- Baksa, Assam, Pin- 781366

Category: SC


Project Cost: Rs. 3, 00,000/-



No. of Employee: 2

Contribution of I-STED Project: Mr. Anup Modak, Age 28, HSLC passed is an EDP trained entrepreneur under i-STED Project, NER. He got the EDP training during 2015-16 at Goreawar and as a part of his training programme, he had selected a project to manufacture innovative bakery products. After start of production, EDI had sent renowned food scientist Mr. Jagan Mohan of Indian Institute of Crop Processing Technology to his unit and he had given him guidance for quality production. EDI also sent Mr. KK Shaw, Technical consultant to his unit for introduction of modern Machines and equipments in his unit and to upgrade present production process. EDI also made linkages with IDBI bank for loan to purchase modern Machines and sent him to Gujarat for exposure visit for getting experience of available modern technology for bakery units. EDI also provided technical training through IICPT-Guwahati on innovative bakery products like pizza, decorative birth day cake making to create product diversification on his unit, which he started making and is getting good market response in Goreswar area of Baksa district, Assam. EDI has provided linkages with DICC- Baksa for getting registration and support and also has provided information on the procedure for getting Food Safety Liscence. Outcome:

Up gradation of existing unit Annual Turnover: Rs 48 Lakh Increase in income by 23%


24


Name of the Entrepreneur: Mr. Kumud Das

Name of the Enterprise: M/S Lipika Udyog

Address: Vill. - Goreswar

P.O- Goreswar

Dist.- Baksa (Assam), Pin- 781366

Category: SC





No. of Employee: 3

Contribution of i-STED Project: Mr. Mr. Kumud Das -age 41, HSLC passed, was trained in EDP at Goreswar during 2015-16 under i-STED Project, NER. Before joining the training programme, he was running oil expelling unit and producing 400 litres per day. Although, he was selling his mustard oil in the market, he faced problem due to non filtration of his product. Sri Das wanted to modernize his unit so that he will be able to sell filtered oil. EDI sent Mr. KK Shaw, a technology expert to visit his unit and gave him ideas and guidance how to use modern Machines and equipments in his unit and how to get better performance of his existing Machines. He started making filtered oil by hiring filtering Machine and thereby improving quality of oil. He has applied for bank loan to IDBI Bank which is under process. EDI has provided linkages with DICC- Baksa for getting registration and support and also has provided information on the procedure for getting Food Safety Liscence.EDI helped him in opening income tax file, Sales tax & VAT registration, land valuation process etc. Outcome:


Photograph of the Unit:

25

Case No.5 (Existing) Name of the Entrepreneur: Mr. Bhagirath Patgiri

Name of the Enterprise: M/S Patgiri Rice Mill

Address: Vill. & PO- Betna PS- Goreswar, Dist.- Baksa, Assam, Pin- 781366

Category: OBC





No. of Employee: 3

Contribution of EDI: Mr. Bhagirath Patgiri, 44 yrs, HS passed, is an EDP trained entrepreneur under i-STED Project, NER. He is running a rice production unit with Rice Huller & Rice Sheller Machine. During Techno Demonstration programme conducted at Goreswar he was taught to produce quality rice and rice based products through techniques given by Dr. Jagan Mohan of Indian Institute of Crop Processing Technology. He was also guided by Mr. K K Shaw, EDI-Ahmedabad, who had visited his unit. He suggested techniques and provided guidance to use modern Machines and equipments in his unit and also suggested how to get better performance of his existing Machines. The techniques which increase life of Hauler scroll was given to him and he started following the techniques in his unit and thereby got benefit. Again, in the Plumber block bearing, he observed that the husk and dust goes inside the bearing and present life of the bearing is 3-4 months. The techniques provided by Mr Shaw of covering the bearing heads could mitigate this problem. All of this could lower his operating cost and thus productivity increased. EDI also made linkages with IDBI bank for loan to purchase modern Machines and also sent him to Gujarat for Exposure visit for getting experience of available modern technology for rice production. EDI has provided linkages with DICC- Baksa for getting registration and support and also has provided information on the procedure for getting Food Safety Liscence. Outcome:

Up gradation of existing unit Annual turnover: Rs 60 Lakh Increase in income by 22%


26


Name of the Entrepreneur: Mr. Gopal Das

Name of the Enterprise: M/S Gopal Oil Mill

Address: Vill. - Goreswar

P.O- Goreswar, Dist.- Baksa,

Assam, Pin- 781366

Category: SC



Funding:

Own finance: Rs. 5, 00,000/-


No. of Employee: 3

Contribution of i-STED Project: Mr. Gopal Das , 36 yrsgraduate, is an EDP trained entrepreneur under i-STED Project, NER. During the EDP, conducted at Goreswar during 2015-16, he had selected a project on modernized Mustard oil unit. He is running oil expelling unit and producing 250 liters of oil per day. He was selling unfiltered mustard oil in the market. Mr. KK Shaw from EDI- Ahmedabad visited his unit and gave idea, techniques, and guidance how to use modern Machines and equipments in his unit and how to get better performance of his existing Machines. He was advised to use either filter press Machine or filter paper for filtering oil. Later on he started using filter press Machine on hiring basis. Mr.Das applied for bank loan to IDBI Bank which is under process. EDI provided linkages with DICC- Baksa for getting registration and support, and provided information on the procedure for getting Food Safety Liscence. EDI helped him in opening income tax file, Sales tax & VAT registration, land valuation process etc. Outcome:

Up gradation of existing unit Annual Turnover: Rs. 48 Lakh Increase in income by 20%


27

Case No.7 (Existing) Name of the Entrepreneur: Mr. Sajal Baishya

Name of the Enterprise: M/S Radha Gobinda Bakery

Address: Vill.- No 2 Goreswar

P.O. – Goreswar, Dist- Baksa,

Assam, Pin- 781366

Category: SC



Funding:



No. of Employee: 3

Contribution of i-STED Project: Mr. Sajal Baishya 41 is an EDP trained entrepreneur under i-STED Project, NER. As a part of his training programme, he selected a project to manufacture innovative Bakery products as he was already running a traditional bakery. EDI arranged to send Mr. Jagan Mohan of Indian Institute of Crop Processing Technology to his unit for providing technical guidance. Also his unit was visited by Mr. KK Shaw from EDI Ahmedabad for giving hand holding support in technical side. EDI also made linkages with IDBI bank for loan to purchase modern Machines and sent him to Gujarat for Exposure visit for getting experience of available modern technology for bakery units. EDI provided linkages with IICPT-Guwahati for technical training on innovative bakery products like pizza, decorative cakes etc. for making. After producing these products in his unit, he is getting good market repose in Goreswar area of Baksa district of Assam. EDI provided linkages with DICC- Baksa for getting registration and support, and provided information on procedure for getting Food Safety Licence. Outcome:



28

Case No.8 (Existing & New) Name of the Entrepreneur: Mr. Binanda Deka

Name of the Enterprise: M/S Deka Rice Mill

Address: Vill. - Maharipara

P.O. – Betna, Dist. - Baksa

Assam, PIN- 781364

Category: ST



Funding:



No. of Employee: 3

Contribution of EDI: Mr. Binanda Deka, aged 36, HS passed is an EDP trained entrepreneur under i-STED Project, NER. During the EDP training programme, he had selected a project for production of rice using modern techniques as he was already running a rice production unit with old rice huller, rice Sheller Machine. During Techno Demonstration programme conducted at Goreswar he was given inputs to produce quality rice and rice based products by Dr. Jagan Mohan of Indian Institute of Crop Processing Technology. He was also guided by Mr. K K Shaw from EDI- Ahmedabad who visited his unit and gave idea, techniques to modernize the Machines and equipments in his unit and how to get better performance of his existing Machines. He followed the techniques suggested by the experts and achieved goods results. EDI also made linkages with IDBI bank for loan to purchase modern Machines and sent him to Gujarat for Exposure visit for getting experience of available modern technology for rice production. However, Sri Deka after his visit became interested in modern mustard oil expelling unit with filter press after seeing one at Rajkot. After returning from the visit he ordered a mustard oil expelling mill investing Rs 3 lacks with filter press and started a new unit on mustard oil. EDI provided linkages with DICC- Baksa for getting registration and support, and provided information on procedure for getting Food Safety Licence. Outcome:

Diversified New Unit Annual Turnover: Rs 48 Lakh Increase in income by 20%

Photograph of Oil expelling unit:

29

Case No.9 (New)

Name of the Entrepreneur: Mr. Rana Moran

Name of the Enterprise: M/S Piyola Green Tea

Address: Vill.- Kakojan 4 No.

P.O. Kakojan, Dist- Tinsukia,

Assam,Pin- 786151

Category: OBC



Funding:



No. of Employee: 3

Contribution of i-STED: Mr. Rana Moran, 34 yrs, B.Com passed is an EDP trained entrepreneur under i-STED Project, NER of Tinsukia had selected a project to manufacture Tea, including green tea processing. After the training he had started production of organic Green tea using latest Machines and driers in his unit. During the training programme linkages with DICC- Tinsukia, Tea Board of India, Tinsukia and NARARD was established for getting government scheme, NOC and finance/grants. EDI made linkages with Toklai tea Research Institute and collected information about development of the production process as well as for new products like white tea in his unit. EDI further made linkages with Assam Gramin Vikash Bank for giving financial support to him. Outcome:

Up gradation of existing unit Annual Turnover: Rs 48 Lakh


30

Case No.10 (New) Name of the Entrepreneur: Mr. Bhupen Deka

Name of the Enterprise: M/S Urbashi mill

Address: Sri Bhupen Deka

Vill.- No 2 Goreswar

P.O. – Goreswar, Dist- Baksa,

Assam, Pin- 781366

Category: ST



Funding:



No. of Employee: 4

Contribution of i-STED Project: Mr. Bhupen Deka, aged 40, a HSLC passed is an EDP trained entrepreneur under i-STED Project, NER. During the EDP training programme, he had selected a project for production of beaten rice using modern techniques. He was producing beaten rice using traditional methods for home consumption. During Techno Demonstration programme he was given inputs to produce quality rice and rice based products by Dr. Jagan Mohan of Indian Institute of Crop Processing Technology. He was guided by Mr. K K Shaw,EDI-Ahmedabad on use of modern Machines and equipments. Mr. Bhupen Deka participated in an exposure visit to Gujarat organised by EDI. During the visit he saw modern puffed rice and beaten rice unit using Roaster Machine. After the visit he planned accordingly and invested Rs 3.5 lacks for purchasing a Roaster Machine and construction a work shed in his unit. Presently , he is producing beaten rice as well as puffed rice in his unit. EDI made linkages with IDBI bank for loan to purchase Machines. EDI also provided linkages with DICC- Baksa for getting registration and support, and provided information and procedure for getting Food Safety Liscence. Outcome:

Diversified new unit Annual Turnover: Rs 60 Lakh

Photograph of the unit:

31

Case No.11 (New)

Name of the Entrepreneur: Mrs Bharati Barkakoty

Name of the Enterprise: M/S Jeuty Food products

Address: Vill.- Mikirbheta

P.O. Mikirbheta, Dist- Morigaon,

Assam, Pin- 782127

Category: General



Funding:



No. of Employee: 2

Contribution of EDI: Mrs. Bharati Barkakoty, a 42 yrs HS Passed, is an EDP trained entrepreneur under i-STED Project, NER. She has got EDP Training during 2015-16 at Morigaon and as a part of this training programme; she had selected a project to manufacture innovative bakery products like special birth day cake and pizza. Already, she was producing pickle, Jam & Jelly, squash etc. in a traditional way. She had undergone Technical training for innovative bakery products conducted at IICP-Guwahati and had learned use of modern Machines for production of bakery items and fruit processing. After the training she had started started a unit where she produced litchi based drinks and quality pickle along with decorative birth day cake. She was selected for exposure visit to Gujarat organised by EDI and impressed to see modern mustard oil expelling technology in Gujarat. Just after completion of Gujarat Exposure visit she purchased one mini mustard oil mill with filtering unit after getting subsidy scheme from Deptt. of Agriculture and invested Rs. 3 lakhs and started production of mustard oil. Presently, she is running both the mustard oil mill as well as the food processing unit. EDI has made linkages with IDBI bank, for loan, to purchase modern Machines. Further she is linked up with NABARD- Morigaon for support services to set up modern Pizza production business. EDI provided linkages with DICC- Morigaon for getting registration and support, and also provided information on procedure for getting Food Safety Liscence. Outcome:



32

Case No.-12 (New)

Name of the Entrepreneur: Mrs. Mala Hazarika

Name of the Enterprise: M/S Doughnut

Address: Goswami Service, Pensionpara Path,

P.O.- Chandmari, Guwahati

Assam, Pin: 781003

Category: SC



Funding:



No. of Employee: 3

Contribution of i-STED Project : Mrs. Mala Hazarika a 46 years, HS Passed had taken EDP training at Guwahati during 2015-16. Since, she had interest in making different types of cakes, she had taken technical training under i-STED Project at Indian Institute of crop processing Technology,Guwahati. She has started her unit at her residence and started production of value added cookies, various types of cakes, pastries and special birthday cake and sell on order basis as well as to whole sellers at Chandmari Guwahati. EDI provided linkages with IICPT-Guwahati for taking services of various Machines on hire basis for her production. EDI provided linkages with DICC- Kamrup for getting registration and support, and provided information on procedure for getting Food Safety Liscence. Outcome:



33

Case No.13 (New)

Name of the Entrepreneur: Mr. Seema Baruah

Name of the Enterprise: M/S Pikus Home Made

Address: House no 2, Below Chandmari fly over,

Assam,Guwahati-781003

Category: General





No. of Employee: 2

Contribution of i-STED Project : Mrs. Seema Baruah a 39 years graduate had taken EDP training at Guwahati . Just after the training she got Technical Training on bakery products at Indian Institute of Crop Processing Technology organised under i-STED Project and started production of biscuits, cakes etc. She also participated in technical training in NSIC-Guwahati. She started production from her home and started participating in different fairs to sell her products. EDI provided linkages with DICC- Kamrup (Metro) for getting registration and support, and provided information on procedure for getting Food Safety Liscence. EDI provided linkages with IICPT-Guwahati for taking services of various Machines on hire basis for her production. Outcome:

Creation of new unit Annual Turnover: Rs 24 Lakh


34

Case No.14 (Existing) Name of the Entrepreneur: Mrs. Tutumani Das

Name of the Enterprise: M/S DND Bakery

Address: Vill. - Gugaccha,P.O.- Barpeta Road

Dist. – Barpeta

Assam, PIN-781315

Category: OBC



Funding:


Bank Loan: Rs. 3, 00,000/-


No. of Employee: 2

Contribution of i-STED Project : Mrs. Tutumani Das a 36 years HS passed has participated in EDP training at Guagaccha of Barpeta district of Assam. Although, she got a loan under PMEGP scheme during 2014-15, but due to lack of required technical training, she was unable to start the bakery unit commercially. She came to EDI and informed about her situation. She was provided Technical Training on bakery products at Indian Institute of Crop Processing Technology organised under i-STED Project and benefitted from it and going back, immediately started production of biscuits, cakes etc. She also participated in technical training in NSIC-Guwahati. After getting loan the PMEGP loan from Union Bank of India, Simlaguri branch she started work with modern Machines. Her products are being marketed in Barpeta Road and Barpeta town. EDI provided linkages with DICC- Barpeta for getting registration and support, and provided information on procedure for getting Food Safety Liscence. EDI provided linkages with IICPT-Guwahati for taking services of various Machines on hire basis for her production. Outcome:



35

Case No.15 (Existing) Name of the Entrepreneur: Mr. Bidyut Choudhury

Name of the Enterprise: M/S MDR food products

Address: Ward no.1 Khatabari, Nalbari,

Assam,PIN-781335

Category: General


Project Cost: Rs. 6,00,000/-

Funding:



No. of Employee: 6

Contribution of EDI: Mr. Bidyut Choudhury a 29 years graduate got training in EDP under i-STED Project, NER. During the EDP training programme, he had selected a project for production of noodles using modern techniques. Earlier, he had fund problems and banks also refused to finance his project. After the training, he formed a partnership firm and started production. He procured all Machines and tools from Guwahati. Later,his representative also attended technical Training on Rice based products and noodle making under i-STED Project He was guided by Mr. Riken Shah, Technical expert from EDI-Ahmedabad, who had visited his unit and gave him technical advice on how to use modern Machines and equipments for better performance in his unit . EDI provided linkages with DICC- Nalbari for getting registration and support, and provided information on procedure for getting Food Safety License Outcome:



36

Case No.16 (Existing) Name of the Entrepreneur: Mr. Mridupawan Talukdar

Name of the Enterprise: M/S B.T. Rice Mill

Address: Vill-P.O.- Dwarkuchi, Dist.- Baksa,

Assam, PIN-781376

Category: OBC



Funding:



No. of Employee: 3

Contribution of EDI: Mr. Mridupawan Talukdar, aged 21 years, B.Com passed is an EDP trained entrepreneur under i-STED Project, NER. His father was running a rice milling unit. During the EDP training programme conducted at Dwarkuchi during 2015-16, he had selected a project for milling of rice using modern techniques. He also attended our Techno demo programme at Goreswar and got information for product quality and diversification. He was guided by Mr. Riken Shah from EDI-Ahmedabad, who had visited his unit and given idea and techniques as well as guidance of how to use modern Machines and equipments in his unit .He started rice milling and packaging in 50 Kg, 25 Kg and 10 Kg packets. He sends his products to Goreswar, Baksa district and Rangiya, Kamrup district. EDI provided linkages with DICC- Baksa for getting registration and support, and provided information on procedure for getting Food Safety Licence. Outcome:

Up gradation and diversification of existing unit Annual Turnover: Rs 36 Lakh Increase in income by 20%


37

Case No.17 (Existing) Name of the Entrepreneur: Mr. Guneswar Baruah

Name of the Enterprise: M/S Baruah Rice Mill

Address: Vill. & PO- Belkona

Dist.- Kamrup ,

Assam, Pin- 781361

Category: General



Funding:



No. of Employee: 3

Contribution of EDI: Mr. Guneswar Baruah - aged 40 , HS passed is an EDP trained entrepreneur under i-STED Project, NER. He had selected a project to produce rice using modern techniques. He was running his rice production unit with Rice Huller and Rice Sheller Machine. During the EDP training programme conducted at Goreswar during 2016, he had selected a project for production of rice using modern techniques. He was guided by Mr. Riken Shah from EDI-Ahmedabad, who had visited his unit and gave idea and techniques as well as guidance how to use modern Machines and equipments in his unit and how to get better performance from his existing Machines. Initially, he used his Machine for public milling of rice only. After the training and technical inputs given by EDI, he has started selling rice in 50kg and 25 kgs packets at local market. He made linkages with buyers from Guwahati and started supplying rice and earned good profit. He also started selling beaten rice made from local variety of rice. EDI provided linkages with DICC- Kamrup (Rural) for getting registration and support, and provided information on procedure for getting Food Safety License. Outcome:



38

Case No.18 (Existing) Name of the Entrepreneur: Mr. Kamini Boro

Name of the Enterprise: M/S Boro Rice Mill

Address: Vill. & PO- Barkhata

Dist.- Baksa (Assam), Pin- 781376

Category: ST



Funding:



No. of Employee: 3

Contribution of EDI: Mr. Kamini Boro , aged 33, Class-X passed is an EDP trained entrepreneur under i-STED Project, NER. During the EDP training programme, conducted at Dwarkuchi, he had selected a project for production of rice using modern techniques. He was running a rice production unit with Rice Huller and Rice Sheller Machine. He was guided by Mr. Riken Shah from EDI-Ahmedabad, who had visited his unit and given idea and techniques, guidance how to use modern Machines and equipments in his unit and how to get better performance of his existing Machines. The techniques which increase life of Hauler scroll also given to him and he started following the techniques in his unit and benefitted. Again, also in the Plumber block bearing, the husk and dust goes inside the bearing and life of the bearing is 3-4 months which can be improved covering the bearing heads. This was foillowed and he after following the advice benefitted. Initially he was doing public milling only. After EDI intervention, he started selling milled rice in 50kg and 25 kg gunny bag packets. EDI provided linkages with DICC- Kamrup(Rural) for getting registration and support, and provided information on procedure for getting Food Safety License. Outcome:


Photographs of unit:

39

Case No.-19 (Existing) Name of the Entrepreneur: Mr. Jekebul Hassan

Name of the Enterprise: M/s Mistanna Food Processing

Address: Vill- Bheragaon, Dist.- Barpeta

Pin- 781318

Category: Minority



Funding:



No. of Employee: 4

Contribution of EDI: Mr. Jekebul Hassan a 20 years, HS passed is an EDP trained entrepreneur under i-STED Project, NER. During the EDP training programme, conducted at Barpeta he had selected a project to upgrade his family business and wanted to diversify milk products. His dreams came true when EDI had given him guidance on business opportunities on milk based products and market demand. Earlier he was engaged in production of curd and paneer only. After intervention of EDI he started production of sweets and cream using cream separator. He was guided by Mr. Riken Shah from EDI-Ahmedabad, who had visited his unit. He shared idea and techniques and guided him in use of modern Machines and equipments in his unit and how to get better performance of his existing Machines. EDI provided linkages with DICC- Barpeta (Rural) for getting registration and support, and provided information on procedure for getting Food Safety License. EDI also made linkages with Assam Gramin Vikash Bank for getting loan for his unit. Outcome:



40

Case No.20 (Existing) Name of the Entrepreneur: Mr. Eaha Khan

Name of the Enterprise: M/S EA Industries

Address: Vill- Titakuri P.O.- Kamargaon

Dist. – Kamrup

Assam, Pin- 781361

Category: Minority





No. of Employee: 4

Contribution of EDI : Mr. Eaha Khan is a 32 years old, HS passed EDP trained entrepreneur under i-STED Project, NER. During the EDP training programme conducted at Goreswar, he selected a project on modern rice mill since he was already running a rice production unit with rice Huller and Rice Sheller Machine. He was also interested to start mustard oil production unit. He was guided by Mr. Riken Shah from EDI-Ahmedabad, who visited his unit and gave him inputs on how to use modern Machines and equipments in the present unit and how to get better performance of his existing Machines. Sri Khan started an oil expelling unit and produced 200 ltrs of oil per day. He was advised to use either filter press Machine or filter paper for better quality. Later on, he purchased a filter press Machine under subsidy scheme of DICC. He applied for food safety licence and DICC registration of his products which are under process. EDI provided linkages with DICC- Kamrup (Rural) for getting registration and support, and provided information on the process for getting Food Safety License. EDI helped him in opening income tax file, Sales tax and VAT registration, Land valuation process etc. Outcome:

Up-gradation and Diversification of existing unit Annual Turnover: Rs 48 Lakh Increase in income by 24%

Photograph of the unit:

41

C. Cane & Bamboo sector (20 units) Case No.1 (Existing) Name of the Entrepreneur : Mr. Pradip Ghosh

Name of the Enterprise : M/S GHOSH FURNITURE HOUSE

Address : Vill. - Dighali gaon, Balipara

Dist- Sonitpur,

Assam, Pin- 784101

Category : OBC


Project Cost: Rs. 3, 90, 000/-

Funding:

Own finance Rs. 3, 90,000/-


No. of Employee: 7

Contribution of EDI: In the year 2015, Mr Pradip Ghosh age 37, a B.A passed participated in an Awareness Workshop conducted by EDI at Guwahati under i-STED Project. For the last 25 years, his father & his family used to work in Cane & Bamboo sector. So after Graduation, Mr. Pradip Ghosh was motivated to take up his family business & to expand it. EDI, Guwahati invited him for technology Induction Programme on Cane & Bamboo where modern Machineries & tools & their application were shown in Cane & Bamboo Technology Centre (CBTC), Burnihat. Inputs about modern treatment of Cane & Bamboo were also shown. Different innovative products developed by CBTC were displayed during the Programme. Different Machine operation like Bamboo splitting, Cane splitting, round sticks were demonstrated and taught. Tips of better quality adhesive to be used were given by CBTC. After the Induction Programme & Training he has brought Grinding Machine, Cutting Machine & Polishing Machine in production Process. He is selling his product at Bihar and Punjab. EDI is helping him in establishing a e-commerce business by linking him with Flipkart & Amazon. He is making bamboo & Cane furniture & other utility Items. He is also being linked with DC Handicraft for further help & support.

Further his name is being recommended to BYST for handholding and bank loan support. Outcome:

Up-gradation and Diversification of existing unit Annual Turnover: Rs 4.8 lakh Increase in income by 30%

Glimpses of Activities

42

Case No. 2 (Existing) Name of the Entrepreneur: Mr. Bonjeet Das Name of the Enterprise: M/S BAMBOO STYLE Address: Vill.- Palangdihati, Barpeta town,

P.O. – Barpeta,Dist- Barpeta, Assam, Pin- 781301

Phone No. 8486287989 Category: SC Phone /Mobile No.: 8486287989 Project Cost: Rs. 3,30,000/- Funding: Own finance Rs 30,000/- Bank Loan Rs 3,00,000/- Income per month: Rs. 22,000/- No. of Employee: 5

Contribution of EDI : In the year 2015, Mr. Banjit Das aged 32, a ITI passed attended one Awareness Workshop conducted by EDI , Guwahati under i-STED Project in Barpeta town. There after, he attended Entrepreneurship Development Programme Conducted by EDI, in Barpeta town. Earlier he was engaged in Cane & Bamboo sector with no formal skill training in Cane and Bamboo. In the month of Dec.2015. EDI conducted a Skill training Programme on innovative Cane & Bamboo in Barpeta town through experts from Cane & Bamboo technology centre (CBTC),Burnihat. Different innovative items were taught like Pen Stand, Cloth Hanger, Flower Vase, Fruit tray etc.. There he was introduced to modern tools & Equipments used in Cane & Bamboo sector. He was further referred to Cane & Bamboo technology Centre, (CBTC) Burnihat, for twenty days training on Bamboo Processing with Machines. After that exposure & training, he has brought Grinding Machine , Cutting Machine & Polishing Machine for his production process. Using these machines, his production has increased & quality of product is better. Presently, he is making bamboo furniture & other utility Items. He has qualified for a bank loan under Allahabad Bank, Barpeta Branch. He is also being linked with DC Handicraft schemes for participating in Fare/Mela etc. & further support. Outcome:

Up-gradation and Diversification of existing unit Annual Turnover: Rs 3.6 Lakh Increase in income by 25%


43

Case No- 3 (Existing)

Name of the Entrepreneur : Mr. Sahidul Islam Laskar

Name of the Enterprise : M/s Sahidul Cane & Bamboo Udyog

Address : Vill.- Raipur, Barpeta,

P.O. – Barpeta,Dist- Barpeta,

Assam, Pin- 781301

Category : Minority

Phone /Mobile No. : 9859136353

Project Cost : Rs. 2, 05,000/-

Funding:

Own finance : Rs. 2, 30,000/-

Income per month : Rs. 21,000/-

No. of Employee : 4

Contribution of EDI : Mr. Sahidul Islam Laskar age 38, is a small Cane & Bamboo Entrepreneur of Raipur, Barpeta. In the year 2015, Mr. Sahidul Islam Laskar attended an Awareness Workshop conducted by EDI Guwahati under i-STED Project. Further he underwent another skill training programme on Cane & Bamboo on Innovative Product at Barpeta town conducted by EDI Guwahati. He started his unit with own finance and produced utility items like flower Vase,Candle stand, Pen stand decorative tray in his village. He has registered his unit with DI &CC, Barpeta. He also attended a one day technology demonstration of Cane & bamboo machineries & tools, where different machines like Bamboo Splitting Machine, Sliver making Machine ,Bamboo Stick making Machine, Incense Stick Masala coating Machine etc were shown .

He has introduced small machineries like Grinding Machine , Cutting Machine & Polishing Machine in the production process. He is making bamboo furniture & other utility items. He is also linked with DC Handicraft, for further help & support. State Institute of Rural Development was roped in to give bank finance under SJSRY from Bank of India, Barpeta Branch.

He has no difficulty in marketing his products as they have a good market. DC Handicraft has further facilitated in participating in Melas/Fares. Outcome:


44

Case No- 4 (New) Name of the Entrepreneur: Mrs. Helen Barman

Name of the Enterprise: M/S Barman Cane & Bamboo Udyog.

Address: Vill.- Ghohkuchi

P.O. – Khatikuchi, Dist- Nalbari,

Assam, Pin- 781366

Category General


Project Cost: Rs. 60,000/-

Funding:

Own finance Rs. 60,000/-


No. of Employee: 2

Contribution of EDI : Mrs. Helen Barman, age 32, is an H.S.L.C passed, house wife living in Ghohkuchi village at Nalbari district. She was identified during EAP under i-STED Project, NER. Though she has witnessed, her in-laws making traditional Bamboo Products, she was practically not involved in production of the handicraft items. She was selected for a four month skill training Programme on Cane & Bamboo Craft conducted by EDI at Nalbari. In the programme, training on production of new & innovative products such as pen stand, bread Basket, flower vase rice basket etc, were given & during the training these products were made. She also participated in a day long Technology Demonstration Programme on Cane & Bamboo machineries & tools conducted by EDI. Different machines like Bamboo Splitting Machine, Sliver Making Machine ,Bamboo Stick Making Machine, Incense Stick Masala Coating Machine etc were shown . Regional Director, DC(Handicraft) visited the Programme, where further input on organic treatment of Bamboo was explained by using neem leave. She had been linked to different DC Handicraft schemes like Artisan Card, exhibition etc. Further, she is being proposed to provide financial linkages under Mudra scheme for which discussion are going on with AGVP Bank. She has prepared a project to manufacture innovative bamboo products like pen stand, flower vase bread basket, rice basket, wall Hanging etc. She has no difficulty in marketing her products as they are lifted from home. With artisan card, she will also be able to participate in various fairs sponsored by DC (Handicrafts), Govt of India.

Outcome:

Creation of new unit Annual Turnover: Rs 1.8 Lakh (projected)


45

Case No.5 (Existing) Name of the Entrepreneur: Mrs. Anika Barman

Name of the Enterprise: M/S Anika Cane & Bamboo Udyog


P.O. – Khatikuchi,Dist- Nalbari,

Assam, Pin- 781366

Category General



Funding:



No. of Employee: 3

Contribution of EDI: Mrs. Anika Barman, aged 38, is X passed living in Ghohkuchi village at Nalbari district. & was involved in traditional bamboo craft making. Her whole family was sustaining by making traditional Bamboo products. She was selected for a four month skill training Programme on Cane & Bamboo Craft conducted by EDI at Nalbari. In the programme, training on production of new & innovative products such as pen stand, bread Basket, flower vase rice basket etc, were given & during the training these products were made. She also participated in a day long Technology Demonstration Programme on Cane & Bamboo machineries & tools conducted by EDI. Different machines like Bamboo Splitting Machine, Sliver Making Machine ,Bamboo Stick Making Machine, Incense Stick Masala Coating Machine etc were shown . Regional Director, DC (Handicraft) visited the Programme, where further input on organic treatment of Bamboo was explained by using neem leave. She had been linked to different DC Handicraft schemes like Artisan Card, exhibition etc. Further, she is being proposed to provide financial linkages under Mudra scheme for which discussion are going on with AGVP Bank. She has selected a project to manufacture innovative bamboo products like pen stand, flower vase bread basket, rice basket, wall Hanging etc. She has no difficulty in marketing as there is demand for these products which are lifted from home by wholesaler. With artisan card, she will also be able to participate in various fairs sponsored by DC (Handicrafts), Govt of India.

Outcome: Up-gradation and Diversification of existing unit Annual Turnover: Rs 2.16 Lakh Increase in income by 20%


46

Case No.6 (New) Name of the Entrepreneur: Mrs Urbashi Das

Name of the Enterprise: M/S Usbashi Cane & Bamboo Centre



Assam, Pin- 781366

Category OBC



Funding:



No. of Employee: 2

Contribution of EDI: Mrs. Urbashi, age 31, Is an H.S.L.C passed, house wife living in Ghohkuchi village at Nalbari district. She was identified during EAP under i-STED Project, NER. Though she has seen people in her village making traditional items from Bamboo she was not involved with this activity. EDI selected & motivated her for four month skill training Programme on Cane & bamboo craft, In the programme different new & innovative products were show & prepared by them such as pen stand, Bread Basket, flower vase, rice basket, wall hanging etc.. Also she participated in one day Technology Demonstration Programme on cane & Bamboo Machineries & tools conducted by EDI where different Machines like Bamboo Splitting Machine, Sliver Making Machine ,Bamboo Stick Making Machine, Paddle Operated Masala Coating Machine for Incense stick etc were shown . Regional Director, DC (Handicraft) visited the Programme ,where further input on modern treatment of Bamboo was explained by using neem leave. She had been linked to different DC Handicraft schemes like Artisan Card, exhibition etc. Further she is being proposed to be provided financial linkages under Mudra scheme for which discussion are going on with AGVP Bank, Nalbari Branch. She has designed a project to manufacture innovative bamboo products like pen stand, flower vase bread basket, rice basket; wall Hanging etc. She has no difficulty in marketing as products as there is demand & product are lifted from home by wholesaler. With DC handicraft artisan card, she will also be able to participate in various fairs sponsored by DC (Handicrafts), Govt of India.

Outcome: Creation of new unit Annual Turnover: Rs 1.8 Lakh (projected)


47

Case No. 7 (Existing) Name of the Entrepreneur: Mrs Anima Das

Name of the Enterprise: M/S Anima Cane & Bamboo Udyog.



Assam, Pin- 781366

Category OBC


Project Cost: Rs 50, 000/-

Funding:

Own finance Rs 50, 000/-


No. of Employee: 3

Contribution of EDI: Mrs. Anima Das, age 45, a X passed house wife living in Ghohkuchi village at Nalbari district & was involved with traditional bamboo product making. She was identified during EAP under i-STED Project, NER. EDI selected her for four month skill training Programme on Cane & Bamboo Craft. In the programme different new & innovative products were show & prepared by them such as pen stand, Wall hanging, flower vase, rice basket etc. She also participated in one day Technology Demonstration Programme on cane & Bamboo Machineries & tools conducted by EDI where different Machines like Bamboo Splitting Machine, Sliver Making Machine ,Bamboo Stick Making Machine, Paddle Operated Masala coating Machine for incense stick etc were shown. Regional Director DC (Handicraft) visited the programme, where further input on modern treatment of Bamboo was explained by using neem leave. She had been linked to different DC Handicraft schemes like Artisan Card, exhibition etc . Further she is being proposed to be provided financial linkages under Mudra scheme for which discussion are going on with AGVP Bank, Nalbari Branch. She has designed a project to manufacture innovative bamboo products like pen stand, flower vase bread basket, rice basket ,wall Hanging etc which has good market .She has no difficulty in marketing her products as they are taken from home by wholesaler. With DC handicraft artisan card, she will also be able to participate in various fairs sponsored by DC(Handicrafts),Govt of India. Outcome:



48

Case No. 8 (Existing) Name of the Entrepreneur: Mrs Kamala Das

Name of the Enterprise: M/S Das Cane & Bamboo Udyog.



Assam, Pin- 781366

Category OBC



Funding:



No. of Employee: 3

Contribution of EDI : Mrs. Kamala Das, age 46, is an H.S.L.C passed house wife living in Ghohkuchi village at Nalbari district. She was identified during is an EAP under i-STED Project, NER. She & her family member have been working in cane Bamboo sector for the last twelve years & making traditional items from bamboo & selling it in the local market & to whole seller. EDI selected her for four month skill training Programme on Cane & Bamboo Craft. New & innovative products were shown & prepared by them such as pen stand, bread basket, flower vase, rice basket etc during the Programme. She also attended a one day Technology Demonstration Programme on Cane & Bamboo Machineries & tools conducted by EDI, where different machines like Bamboo Splitting Machine, Sliver Making Machine ,Bamboo Stick Making Machine, Paddle Operated Masala Coating Machine for incense stick making etc. Regional Director DC (Handicraft) visited the programme where further input on organic treatment of bamboo was explained by using neem leave & she also informed them about DC handicraft Artisan Card, & other schemes. She had been linked to different DC Handicraft schemes like Artisan Card, exhibition etc. Further she is being proposed to be provided financial linkages under Mudra scheme for which discussion are going on with AGVP Bank, Nalbari Branch. Presently, she is manufacturing these innovative bamboo products like pen stand, flower vase, bread basket, rice basket, wall hanging etc. She is marketing her products through in local market & to whole sellers. With artisan card, she will also be able to participate in various fairs sponsored by DC (Handicrafts), Govt of India. Outcome:



49

Case No.9 (Existing) Name of the Entrepreneur: Mrs Rina Das

Name of the Enterprise: M/S Durga Cane & Bamboo Udyog.



Assam, Pin- 781366

Category OBC



Funding:



No. of Employee: 3

Contribution of EDI : Mrs. Rina Das, aged 50 years, is v passed and a house wife living in Ghohkuchi village at Nalbari district. She was identified during EAP under i-STED Project, NER. Her whole family is involved in Cane & Bamboo sector making traditional items & presently sustaining on it. EDI selected her for a four month skill training Programme on Cane & Bamboo craft, In the programme different new & innovative products were show & prepared by them such as pen stand, Bread Basket, flower vase, rice basket etc which has good market. She also participated in one day Technology Demonstration on Cane & Bamboo machineries & tools conducted by EDI where different machines like Bamboo Splitting Machine, Sliver Making Machine ,Bamboo Stick making Machine, Paddle operated Masala Coating Machine for incense stick etc were shown. Regional Director Dc (Handicraft) visited the Programme, where further input on modern treatment of Bamboo was explained by using neem leave. She had been linked to different DC Handicraft schemes like Artisan Card, exhibition etc. Further she is being proposed to be provided financial linkages under Mudra scheme for which discussion are going on with AGVP.Bank, Nalbari Branch. Presently she is manufacturing innovative bamboo products like pen stand, flower vase, bread basket, rice basket ,wall hanging etc. She has no difficulty in marketing these products as they are lifted from home. With artisan card, she will also be able to participate in various fairs sponsored by DC (Handicrafts), Govt of India. Outcome:



50

Case No.10 (Existing) Name of the Entrepreneur: Mrs Binita Das

Name of the Enterprise: M/S Sankardev Cane & Bamboo Udyog



Assam, Pin- 781366

Catagory OBC



Funding:

Own finance: Rs. 65,000/-


No. of Employee: 3

Contribution of EDI : Mrs. Binita Das, aged 45, is an IX passed, house wife living in Ghohkuchi village at Nalbari district. She was identified during EAP under i-STED Project, NER. Her family members are involved in the Cane & Bamboo sector for seven years & this is their only source of income. She had shown interest for four month skill training Programme on Cane & Bamboo Craft, conducted by EDI. In the programme different new & innovative products were show & prepared by them such as pen stand, Bread Basket, flower vase, rice basket etc which has good market. She also participated in one day Technology Demonstration on Cane & Bamboo machineries & tools conducted by EDI where different machines like Bamboo Splitting Machine, Sliver Making Machine, Bamboo Stick making Machine, Paddle operated Masala Coating Machine for incense stick etc were shown. Regional Director Dc (Handicraft) visited the Programme, where further input on modern treatment of Bamboo was explained by using neem leave. She had been linked to different DC Handicraft schemes like Artisan Card, exhibition etc. Further it is being proposed to provide financial linkages under Mudra scheme for which discussion are going on with AGVP Bank, Nalbari Branch. Presently she is manufacturing innovative bamboo products like pen stand, flower vase, bread basket, rice basket, wall hanging etc. She has no difficulty in marketing these products as they are procured by the Whole Sellers from her home. With artisan card, she will also be able to participate in various fairs sponsored by DC (Handicrafts), Govt of India. Outcome:


51

Case No.11 (New) Name of the Entrepreneur: Mrs Dipali Rajbongshi

Name of the Enterprise: M/S Dipali Bah & Bat Udyog



Assam, Pin- 781366

Category General



Funding:



No. of Employee: 2

Contribution of EDI: Mrs. Dipali Rajbongshi, aged 42, had her elementary education from her village L.P school. She is living in Ghohkuchi village at Nalbari district. Earlier her source of income was from weaving various traditional clothes & selling it in local market. She was identified during EAP under i-STED Project, NER. EDI selected her for a four month skill training Programme on Cane & Bamboo Craft, In the programme, different new & innovative products were prepared by them such as pen stand, hand fan, flower vase, rice basket etc. She also participated in one day Technology Demonstration programme on Cane & Bamboo machineries & tools conducted by EDI. Different machines like Bamboo Splitting Machine, Sliver Making Machine ,Bamboo Stick making Machine, Paddle Operated Masala coating Machine for incense stick etc were shown. Regional Director DC (Handicraft) visited the programme ,where further input on organic treatment of bamboo was explained by using neem leave. She had been linked to different DC Handicraft schemes like Artisan Card, exhibition etc. Further she is being proposed to be provided financial linkages under Mudra scheme for which discussion are going on with AGVP.Bank. She has selected a project to manufacture innovative bamboo products like pen stand, flower vase bread basket, rice basket ,wall Hanging etc. The innovative & new product she is making has good market locally & outside. With artisan card, she will also be able to participate in various fairs sponsored by DC (Handicrafts),Govt of India. Outcome:


52

Case No-12 (New) Name of the Entrepreneur: Mrs Lani Barman

Name of the Enterprise: M/S Barman Cane & Bamboo Udyog


P.O. - Khatikuchi

Dist- Nalbari, Pin- 781369

Category General



Funding:



No. of Employee: 2

Contribution of EDI : Mrs. Lani Barman, age 28, is IX passed. She is a house wife living in Ghohkuchi village at Nalbari district. She was identified during EAP under i-STED Project, NER. Earlier, she had meager knowledge about traditional bamboo product making. EDI selected & motivated her for a four month skill training programme on cane & bamboo craft. In the programme, different new & innovative products were prepared by them such as pen stand, bread & rice basket, flower vase, etc. She also participated in one day Technology Demonstration Programme on cane & Bamboo machineries & tools conducted by EDI. Different Machines like Bamboo Splitting Machine, Sliver making Machine ,Bamboo stick making Machine, Paddle operated Masala Coating Machine for incense stick etc. were shown. Regional Director DC (Handicraft) visited the programme, where further input on organic treatment of Bamboo was explained by using neem leave. She has been linked to different DC Handicraft schemes like Artisan Card, exhibition etc. Further it is being proposed to provide financial linkages under Mudra scheme for which discussion are going on with AGVP Bank, Nalbari Branch. She has designed a project to manufacture innovative bamboo products like pen stand, flower vase, bread & rice basket, wall hanging etc. She has no difficulty in marketing her products as they are directly picked up by whole sellers from her home. With artisan card, she will also be able to participate in various fairs sponsored by DC (Handicrafts), Govt of India. Outcome:


53

Case No – 13 (New) Name of the Entrepreneur: Mrs Bini Rajbongshi

Name of the Enterprise: M/S Sankardev Cane & Bamboo Udyog

Address: Vill.- Khudrabistupur

P.O. – Chengnoi, Dist- Nalbari,

Assam, Pin- 781367

Category General


Project Cost: Rs 60,000/-

Funding:

Own finance Rs 60,000/-

Income per month: Rs 10,000/-

No. of Employee: 2

Contribution of EDI : Mrs. Bina Rajbongshi Das, age 45, is an IX passed, house wife living in Ghohkuchi village at Nalbari district. She was identified during an EAP under i-STED Project, NER. She was unemployed when EDI identified her.& motivated her to take up Cane & Bamboo activity for gainful self employment as bamboo resource was available in her village.& has seen people in her village working in Cane & Bamboo sector & making traditional items .EDI selected her for four month skill training Programme, In the programme different new & innovative products were prepared such as pen stand, hand fan, flower vase, rice & bread basket etc. She attended one day Technology Demonstration Programme on cane & bamboo machineries & tools conducted by EDI. Different machines like Bamboo Splitting Machine, Sliver making Machine ,Bamboo stick making Machine, Paddle operated Masala coating Machine for incense stick etc were shown . Regional Director DC (Handicraft) visited the Programme, where further input on organic treatment of Bamboo was explained by using neem leave. She had been linked to different DC Handicraft schemes like Artisan Card, exhibition etc.

EDI is trying to link her to the MUDRA scheme and is in dialogue with AGVB, Nalbari Branch.

She has designed a project of setting up of a unit to manufacture innovative bamboo products. She is preparing some products from her unit and marketing in local market. With artisan card, she will also be able to participate in various fairs sponsored by DC (Handicrafts), Govt of India.

Outcome: Creation of new unit Annual Turnover: Rs 2.16 Lakh (projected)

54

Case No -14 (Existing) Name of the Entrepreneur: Miss Mira Begum

Name of the Enterprise: M/S Mira Bah & Bat Udyog

Address: Vill.- Janigog

P.O. – Janigog, Dist- Nalbari,

Assam, Pin- 781334

Category Minority



Funding:



No. of Employee: 3

Contribution of EDI : Mira Begum Das, age 27, Is an H.S.L.C passed, She was women living in Janigog village at Nalbari district. She was involved with producing handicraft items of cane & bamboo & her whole family was sustaining on it. She had attended an EAP under i-STED Project, NER followed by a four month skill training programme on cane & bamboo. In the programme, she acquired the art making different new & innovative products like pen stand, hand fan, flower vase, decorative bamboo house, etc. Regional Director DC (Handicraft) visited the programme, where further input on modern treatment of bamboo by using neem leave was given. She had been linked to different DC Handicraft schemes like Artisan Card, exhibition etc. With her previous experience and design input obtained from EDI programme, she has been proposed to link with Bank for MUDRA loan, for which discussion are going on with AGVP Bank, Nalbari Branch. Outcome:



55

Case No-15 (New)

Name of the Entrepreneur: Miss Putuli Deka

Name of the Enterprise: M/S Deka Bah Bat Udyog

Address: Vill.- Janigog

P.O. – Janigog, Dist- Nalbari,

Assam, Pin- 781334

Category General



Funding:

Own finance Rs 40,000/-


No. of Employee: 2

Contribution of EDI : Miss Putuli Deka, age 35, is a class IX passed unemployed women living in Janigog village at Nalbari district. She was identified during an EAP under i-STED Project. EDI selected her for a four month skill training programme on cane & bamboo craft. In the programme, different new & innovative products were prepared by them such as pen stand, hand fan, flower vase, basket, candle stand etc. Regional Director DC (Handicraft) visited the Programme, where further input on modern treatment of Bamboo was explained by using neem leave. She had been linked to different DC Handicraft schemes like Artisan Card, exhibition etc. She is manufacturing innovative bamboo products like pen stand, flower vase, bread basket, rice basket, wall hanging etc. is selling in local market & to whole sellers. With artisan card, she will also be able to participate in various fairs sponsored by DC (Handicrafts),Govt of India. EDI is in discussion with bank for financing her unit under MUDRA scheme. Outcome:



56

Case No -16 (New)

Name of the Entrepreneur: Miss Majada Khatun

Name of the Enterprise: M/S Majada Cane & Bamboo Udyog

Address: Vill.- Raipur, Barpeta,

P.O. – Barpeta, Dist- Barpeta,

Assam, Pin- 781301

Category Minority



Funding:



No. of Employee: 2

Contribution of EDI : Majada Khatun, aged 40, is a class VIII passed, unemployed women living in Raipur village at Barpeta district. She was identified during an EAP under i-STED Project and enrolled for a four month skill training Programme on cane & bamboo craft held at Barpeta. In the programme skilling on production of different new & innovative products were taught and accordingly, prepared items like pen stand, hand fan, flower vase, basket, candle stand, soap case, letter box, etc. She also participated in one day Technology Demonstration programme on cane & bamboo machineries & tools conducted by EDI. Different machines like Bamboo Splitting Machine, Sliver making Machine ,Bamboo stick making Machine, Paddle operated Masala coating Machine for Incense stick etc were shown . Regional Director DC (Handicraft) visited the programme, where further input on modern treatment of Bamboo was explained by using neem leave. She had been linked to different DC Handicraft schemes like Artisan Card, exhibition etc. as well as proposed for financing of her unit under Mudra scheme for which discussion are going on with Bank of India, Barpeta Road Branch. She is presently producing innovative bamboo products like pen stand, flower vase bread & rice basket, wall hanging etc. in her unit. Her products are marketed through whole sellers and directly from her unit. With artisan card, she will also be able to participate in various fairs sponsored by DC(Handicrafts),Govt of India for marketing. Outcome:



57

Case No – 17 (New) Name of the Entrepreneur: Kulsun Nessa

Name of the Enterprise: M/S Abdul Kalam Bah Bat Udyog



Assam,Pin- 781301

Category Minority.



Funding:



No. of Employee: 2

Contribution of EDI : Miss Majada Khatun, age 33, is a class VI passed, unemployed women living in Raipur village at Barpeta district. She was identified during an EAP under i-STED Project, NER and subsequently enrolled in a four month skill training programme on Cane & Bamboo craft. In the programme different new & innovative products were prepared such as pen stand, hand fan, flower vase, basket, candle stand, soap case ,letter box, etc. She also participated in one day Technology Demonstration on cane & bamboo machineries & tools conducted by EDI. Different machines like Bamboo Splitting Machine, Sliver making Machine, Bamboo stick making Machine, Paddle operated Masala coating Machine for incense stick etc were shown. Regional Director, DC (Handicraft) visited the programme, where further input on modern treatment by using neem leaves was given. She had been linked to different DC Handicraft schemes like Artisan Card, exhibition etc. as well as proposed for consideration for financing under MUDRA Scheme. She has selected a project to manufacture innovative bamboo products like pen stand, flower vase soap case, tray, pen stand, rice basket ,wall hanging etc. She is marketing her products from home as well as selling in local markets. With artisan card, she will also be able to participate in various fairs sponsored by DC (Handicrafts), Govt of India.

Outcome:

Creation of new unit Annual Turnover: Rs 2.16Lakh (projected)

58

Case No -18 (New) Name of the Entrepreneur: Nazma Begum

Name of the Enterprise: M/S Tutu Bah Bat Udyog


P.O. - Barpeta

Dist- Barpeta, Pin- 781301

Category Minority



Funding:



No. of Employee: 2

Contribution of EDI : Miss Majada Khatun, aged 32, is a class VI passed, unemployed women living in Raipur village at Barpeta district. She was identified during an EAP under i-STED Project. EDI selected her for four month skill training programme on cane & bamboo craft, held at Barpeta and was skilled in production of several innovative products such as pen stand, hand fan, flower vase, basket, candle stand, soap case, letter box, etc. She was further provided inputs on use of modern machineries in a day long technology demonstration programme on cane & bamboo machinaries & tools conducted by EDI. Different machines like Bamboo splitting Machine, Sliver making Machine, Bamboo stick making Machine, Paddle operated Masala coating Machine for incense stick etc were shown. Regional Director, DC (Handicraft) also provided inputs on modern treatment techniques of Bamboo by using neem leave. She had been linked to different DC Handicraft schemes like Artisan Card, exhibition etc. Further, her unit is being proposed for funding under Mudra scheme, for which discussion are going on with Bank of India, Barpeta Road Branch. She is presently producing innovative bamboo products like pen stand, flower vase bread basket, soap case, wall hanging etc. She has no difficulty in marketing her products as they are picked up directly from home. With artisan card, she will also be able to participate in various fairs sponsored by DC (Handicrafts),Govt of India. Outcome:

Creation of new unit Annual Turnover: Rs 2.04Lakh (projected)

59

Case-19 (Existing)

Name of the Entrepreneur: Mr. Kalyan Das

Name of the Enterprise: M/S Manab Cane Furniture House

Address: Vill.-Dakargaon, Dist- Sonitpur

Assam, Pin- 784501

Category SC


Project Cost: Rs. 2,00,000/-

Funding:

Own finance Rs. 2,00,000/-


No. of Employee: 4

Contribution of EDI : In the year 2015, Mr Kalyan Das, aged 35 , H.S passed participated in a one Awareness Workshop conducted by EDI at Guwahati under i-STED Project. For the last 25 years his father & his family has been working in the cane & bamboo sector. So after graduation Mr. Pradip Ghosh was motivated to take up his family business & expand it. He participated in a technology Induction programme on cane & bamboo where modern machineries & tools & their application were shown in Cane & Bamboo Technology Centre (CBTC). Input on modern treatment of cane & bamboo and skill of preparing various innovative products was shared by CBTC during the Programme. After the Induction Programme & Training, he has installed Grinding Machine , Cutting Machine & Polishing Machine in the production Process. He is selling his product in Bihar and Punjab . EDI is helping him to establish a e-commerce business by linking him with flipkart & Amazon. He is making bamboo & cane furniture & other utility Items. He is also linked with DC Handicraft, for further help & support.

Further he is being proposed for bank finance under Mudra Scheme & BYST. BYST shall handhold him in expanding his unit. 2.16 Outcome:

Up-gradation and Diversification of existing unit Annual Turnover: Rs 2.76Lakh Increase in income by 30%


60

Case No – 20 (New) Name of the Entrepreneur: Samiran Nessa

Name of the Enterprise: M/S Ariful Islam Bat Udyog



Assam, Pin- 781301

Category Minority





No. of Employee: 4

Contribution of EDI : Samiran Nessa, aged 28, is a class VI passed unemployed women living in Raipur village at Barpeta district. She was identified during an EAP under i-STED Project. EDI selected her for a four month duration skill training programme on cane & bamboo craft. In the programme, different new & innovative products were prepared by them such as pen stand, hand fan, flower vase, basket, candle stand, soap case, letter box, etc. She also participated in one day Technology Demonstration on cane & bamboo machineries & tools conducted by EDI where different Machines like Bamboo splitting Machine, sliver making Machine ,Bamboo stick making Machine, Paddle operated Masala coating Machine for incense stick etc were shown. Regional Director, DC (Handicraft) visited the Programme, where further input on modern treatment of Bamboo was explained by using neem leave. She had been linked to different DC Handicraft schemes like Artisan Card, exhibition etc. Further she is being proposed to be provided financial linkages under Mudra scheme for which discussion are going on with Bank of India, Barpeta Branch. She has designed a project for manufacturing innovative bamboo products like pen stand, flower vase, bread & rice basket, wall hanging etc and presently producing and marketing these items from home. With artisan card, she will also be able to participate in various fairs sponsored by DC (Handicrafts),Govt of India for marketing her products. Outcome:

Creation of new diversified unit Annual Turnover: Rs 2.16 Lakh (projected)

61

INNOVATION SCIENCE & TECHNOLOGY ENTREPRENEURSHIP DEVELOPMENT [i-STED-PROJECT]

PROFORMA – III

SUBMISSION OF DATA FOR ANALYSIS UNITS LAUNCHED SECTOR WISE:

TYPE NO. OF UNITS

Food Processing 20

Cane & Bamboo 20

Renewable (Solar) 7

TOTAL 47

UNITS LAUNCHED INVESTMENT WISE:

AMOUNT OF INVESTMENT Rs.

NO. OF UNITS

Up to 1Lakhs 19

>1 Lakh to 5 Lakhs 18



Above 20 Lakhs 00

TOTAL 47

SOURCES OF FUND:

SOURCE NO. OF UNITS

Own Fund 42

Loan 05

TOTAL 47

SOURCE OF LOAN:

SOURCE NO. OF UNITS

Govt.Schemes/seed funding 2

Banks 3

Total 5

UNITS LAUNCHED AGE WISE:

AGE GROUP NO. OF UNITS

18 – 25 4

25 – 35 18

35 - 50 25

Above 50 -

TOTAL 47

UNITS LAUNCHED GENDER WISE:

GENDER NO. OF UNITS

Male 25

Female 22

TOTAL 47

UNITS LAUNCHED CATEGORY WISE:

CATEGORY NO. OF UNITS

General 11

SC 06

ST 05

OBC 12

Minority 13

TOTAL 47

62

List of First time Entrepreneurs:

Sl.No Sector Name of 1st Time Entrepreneurs

Previous Occupation

Current Occupation.

1. Cane & Bamboo sector

Mrs Helen Barman Unemployed Cane & Bamboo Entrepreneurs.

2. Urbashi Das Unemployed Cane & Bamboo Entrepreneurs.

3. Dipali Rajbongshi Weaving Cane & Bamboo Entrepreneurs

4. Lina Barman Was making Traditional Product from Bamboo

Now after skill training she is making Innovative like Bread Basket, Flower Vase etc

5. Bina Rajbongshi Unemployed Cane & Bamboo Entrepreneurs.

6. Putuli Deka Unemployed Cane & Bamboo Entrepreneurs.

7. Majada Khatun Was making Traditional Product from Bamboo

Now after skill training she is making Innovative like Bread Basket, Flower Vase, Letter Box etc

8. Kulsum Nessa Was making Traditional Product from Bamboo


9. Nazma Begum Was making Traditional Product from Bamboo


10 Solar Sector Ms Rajashree Anil Unemployed Started Solar home lighting system and other items assembling, installation, servicing and maintenance Unit.

11 Mr. Joysingh Terron & Harsingh Terron

Unemployed Started Solar home lighting system and other items assembling, installation, servicing and maintenance Unit (partnership business).

12 Abdul Hekim Electrician Started solar home lighting system and other items sales, assembling, installation and maintenance unit.

13 Nur Jamal He was selling some electronics items and ding repairing works on it from his home.

Started solar home lighting system and other items sales, assembling, installation and maintenance unit.

63

14 Keramat Ali Electrician Started solar and

electrical items sales, assembling, installation and servicing unit.

15 Abdus Salam Doing supply of office stationary items under government departments as contractor and also engaged in his own agricultural activities at home.

Started solar home lighting system, water pump sales, installation, assembling and servicing unit.

16 Haidar Ali Electrician Started solar home lighting system and other items sales, installation, assembling and servicing unit.

Visibility efforts for reaching out to Target Group:

Sl.No Programme Conducted Target Areas

1. EAP (34 nos.) Tinsukia, Majuli, Barpeta Road, Barpeta, Lankeswar, Dwarkuchi, Sipajhar, Nikashi(Masalpur), Nalbari, Dharmanagar, Mangaldoi, Silchar(5 Nos.), Dudhnoi ( 5Nos),Hatsinghimari, Mancachar, Badarpur, Karimganj, Agartala, Guwahati (8Nos.)

2, EDP (14 nos.) Mangaldoi,Tinsukia,Barpeta,Nikashi,Majuli, Hajo, Noonmati(Guwahati),Sipajhar, Nikashi ,Agartala, Dharmanagar, Sonapur, Goreswar, Gotanagar(Guwahati)

3. Technology Demonstration Programme (6 nos.)

Raipur (Barpeta), Hajo (Bakta), Ghohauchi (Nalbari,) Gorchuk, Boragaon, Sonapur.

4. Skill Training Programme (12 nos.) IICPT (2Nos),Morigaon, Nalbari (3Nos.),Raipur (Barpeta), Aizawl, Karimganj, Barpeta town, Mangaldoi, Kharupetia

Annexure – II (A) I-STED PROJECT: NER

Technology Acquired/Propagated/Demonstrated During 2015-16/ (II nd Year)

Three technology sectors namely; Cane & Bamboo, Food Processing and Renewable Energy (Solar) have been identified for the interventions to be made under the project. The following machines were acquired/propagated and demonstrated amongst existing/new entrepreneurs for adoption.

CANE & BAMBOO SECTOR:

SL.NO NAME OF THE MACHINE/EQUIPMENT

BENEFIT INCLUDING USE (as per i-STED matrix.)

1. Bamboo mini splitter, with a set of 3 blades & stand.

Uniform splitting with size variation of bamboo can be done where earlier this was done by dao. Increases productivity by 30%. Use for making Incense stick & Bamboo blinds.

2. Bamboo slice making machine, manually operated with blade & lever type.

Uniform Bamboo slices for making stick can be done which will increase production by 30%. Used for making Bamboo mats, Incense stick & bamboo blinds.

3. Bamboo square stick making device, blade type

From bamboo slices, production of square stick can be done which will increase productivity by 30%. Used for making Tooth pick, Incense stick & blinds.

3. Bamboo tools kit box, containing 23 types of hand tools, for furniture making.

Increases productivity. Used for making furniture & decorative items.

4. Incense stick making machine, for coating masala on stick. (paddle operated)

Increase in productivity by 40%. Used for making Incense stick.

B. SOLAR SECTOR.


BENEFIT INCLUDING USE (as per i-STED matrix.)

1. a) SOLAR HOME LIGHTING SYSTEM which include ( Battery, solar Panel, LED, Mobile charger, Fan, controller, cable inverter) OR b) A small system (DC) comprising of two LEDs including battery, solar Panel, controller, mobile charge, etc.

Used for demonstration in areas where electricity is erratic/ unavailable to promote solar system.

C. FOOD PROCESSING SECTOR.


BENIFIT INCLUDING USE (As per i-STED Matrix)

1 Bottle Sealing Machine Jam, jelly, Pickle sealing

2 Hand Sealer Plastic packaging for spice, pickle

3 Aluminium Foil Sealing Machine

Tea packaging (Primarily), pickle, spice packaging

4 Innovative Solar Dryer(SDM-8) Green tea dry, Vegetable dry, Beetle nut dry, spice **

5 Cost Effective Solar Dryer Fish dry, Vegetable dry, green tea dry

** N.B: These dryers will be useful in rural/semi-urban areas for value addition of local Agriculture/Horticulture /fish

resources which currently are sun dried due to non availability of electricity & high cost of such equipment.

Annexure – II (B)

Machineries to be acquired for 2016-17.

CANE & BAMBOO SECTOR:


POSSIBLE BENEFIT INCLUDING USE (as per i-STED matrix.)

1. Drill Machine Can make hole of any size very easily.

2. Sanding/Grinding Machine Gives a natural appearance with a high gloss and sheen to products also Produces a relatively durable finish to the finished product.

3. Cutting Machine This are electric operated & can cut bamboo & Cane very easily .

3. Cross Cutting Machine (Maitre Saw)

A power tool used to make a quick, accurate crosscut in a work piece at a selected angle. Common uses include framing operations and the cutting of moulding. Most maitre saws are relatively small and portable, with common blade sizes ranging from eight to twelve inches.

4. Drum Nail Machine It is a electric operated small tools for making design on Bamboo & Cane.

B. SOLAR SECTOR.


POSSIBLE BENEFIT INCLUDING USE (as per i-STED matrix.)

1. Solar Water Pump It will reduce recurring & increase profitability.

2. Solar Domestic Home lighting Set (PV Panel, Battery, Converter/Controller, DC fan, LED lights)

Access to electricity in absence of grid power.

3. Tool kit ( Screw-driver,Digimeter,Compass etc)

It will help technicians to do their servicing & maintenance work efficiently without facing hazard.

C. FOOD PROCESSING SECTOR.


POSSIBLE BENIFIT INCLUDING USE (As per i-STED Matrix)

1 Portable Industrial Grinder Machine Grinding Technique for powdering dried fruits & Vegetables.

2 Portable Fruits Pulper Pulp Production.

3 Commercial Juicer Modern Juice Extraction Machine.

INNOVATION SCIENCE & TECHNOLOGY …dstisted-ner.in/Doc/Completion-Report_2015-16.pdf · INNOVATION...

Documents

Transcript of INNOVATION SCIENCE & TECHNOLOGY …dstisted-ner.in/Doc/Completion-Report_2015-16.pdf · INNOVATION...