Industrie40 En
-
Upload
zaenal-arifin -
Category
Documents
-
view
215 -
download
0
description
Transcript of Industrie40 En
Industrie 4.0 From Vision to Reality
Technologie-Initiative SmartFactory KL e.V.Trippstadter Straße 12267663 KaiserslauternGermany
E-Mail: [email protected]: +49 631 / 20575 3400Fax: +49 631 / 20575 3402www.smartfactory.de
The technology initiative SmartFactory KL e.V. (SmartFactoryKL) is a non-profit association listed in the Register of Associationsin Kaiserslautern.
is a registered trademark of the SmartFactory KL e.V. Kaiserslautern.
Executive Board
Prof. Dr. Dr. h.c. Detlef Zühlke, DFKI GmbH (Chairman)Dipl.-Phys. Andreas Huhmann, HARTING KGaADr. Detlef Pauly, Siemens AG
Management
Dipl.-Wirtsch.-Ing. Rüdiger Dabelow, DFKI GmbH
Prof. Dr. Dr. h.c. Detlef Zühlke Executive Chairman of the technology initiative SmartFactory KL e.V.E-Mail: [email protected]
Contact
INDUSTRIE From Vision to Reality
4.0
The SmartFactoryKL is a manufacturer-independent demonstration and research platform and unique in Europe. Here,innovative information and communications technologies and their application are tested and developed in a realistic,industrial production environment. We aim to integrate sophisticated information technologies into factory automa-tion. The devices and applications of consumer electronics that are already part of everyday life, e.g., tablet PCs,smartphones, navigation devices and wireless communication systems, will enrich the traditional working methodsin industry and open the way for more flexible and efficient concepts in the future factory operation.
This brochure informs about the innovative production line which was developed together with the partners of theSmartFactoryKL and impressively realizes the practical applications of the crucial aspects of INDUSTRIE 4.0.
The technology initiative SmartFactory KL e.V. was was founded in 2005 as a non-profit association to establish a net-work of industrial and research partners which initiate and implement together research and development projectsranging from base technologies to the development of marketable products.
From the beginning, the SmartFactoryKL has been cooperating intensively with the German Research Centre for ArtificialIntelligence (DFKI). This successful cooperation guarantees the access to leading German research in the field of inno-vative software technologies.
The initiative is supported by the active participation of its members and the financial and material contributions ofits supporters and sponsors. The members, supporters and sponsors create a lively partnership to realise the vision ofthe factory of the future with modern and innovative ideas.
We invite you to become a part of our network.
Background and Vision
Infrastructure Research
Standardization
Transfer
Information and Communication
®®®
®
Boschuere Partner_ENGLISH_Layout 1 27.03.14 11:51 Seite 1
Smar
tFac
tory
KL
Infr
astr
uctu
re B
ackb
one
Qua
lity
Cont
rol
Lase
r Mar
king
Ass
embl
yA
ssem
bly
Engr
avin
g
Star
tPi
ckin
g
Man
ual W
orks
tati
on
•aug
men
ted
real
ity b
ased
m
anua
l ass
embl
y gu
idan
ce
•wor
kflow
reco
gniti
on
syst
em
•vis
ual q
ualit
y co
ntro
l with
high
-res
olut
ion
cam
era
•com
mis
sion
ing
•las
er m
arki
ng o
f cas
ing
cove
r
•ind
ivid
ual Q
R-co
de a
nd
lett
erin
g
•for
ce fi
ttin
g ca
sing
cov
er
and
bott
om
•cas
ing
cove
r mag
azin
e
•mou
ntin
g cl
ip to
cas
ing
bott
om
•clip
mag
azin
e
•ind
ivid
ual
engr
avin
g of
ca
sing
bot
tom
•cas
ing
bott
om m
agaz
ine
Infr
astr
uctu
re S
witc
hIn
fras
truc
ture
Sw
itch
Infr
astr
uctu
re S
witc
hIn
fras
truc
ture
Sw
itch
Infr
astr
uctu
re S
witc
hFa
ctor
yIn
fras
truc
ture
man
ufac
turin
g ba
ckbo
ne te
chno
logy
inte
grat
ion
and
over
all
impl
emen
tatio
n
Coor
dina
tion
an
d In
fras
truc
ture
®
Conn
ecte
dSe
curi
ty
dist
ribut
ed s
ecur
ity
solu
tion
for t
he
man
ufac
turin
g ba
ckbo
ne
mul
tiple
-por
t fire
wal
ls
and
grea
ter l
ink
spee
ds
Pow
erM
easu
rem
ent
com
plet
e tr
ansp
aren
cy
of e
nerg
y flo
ws
and
ener
gy c
onsu
mpt
ion
use
of e
xist
ing
ethe
rnet
st
ruct
ures
Conn
ecte
d Fa
ctor
y
vide
o-ba
sed
rem
ote
mai
nten
ance
vide
o re
cord
ing
and
conf
eren
cing
ERP
Solu
tion
cent
ral o
rder
ent
ry
and
man
agem
ent
syst
em
mat
eria
ls m
anag
emen
t an
d cr
oss-
mod
ule
func
tions
Prod
uct L
ifecy
cle
Man
agem
ent
sing
le s
yste
m o
f rec
ord
to s
uppo
rt d
iver
se
data
nee
ds
acce
ss to
a c
omm
on
repo
sitor
y of
pro
duct
in-
form
atio
n an
d pr
oces
ses
••
••
••
••
••
•
•
pers
onal
ized
bus
ines
s ca
rd h
olde
r
digi
tal p
rodu
ct
mem
ory
for
auto
nom
ous
and
self-
orga
nize
d pr
oduc
tion
proc
ess
• •
Connected Factory CISCO
Module Engraving FESTO
Module Force Fitting HARTING
Connected Security HIRSCHMANN
Module Quality Control LAPP KABEL
Manual Workstation MINITEC
Module Laser Marking PHOENIX CONTACT
ERP-System PROALPHA
Module Clip Mounting REXROTH
Product Lifecycle Management SIEMENS
Key Facts about the SmartFactoryKL - Demonstrator
Our Standards
Our Infrastructure
Our Architecture
• Dimensions: Modules in Euro-pallet dimensions
• Workpiece Transport: Standardized conveyor belt and innovative sluice system
• Universal Plug-In Connector: Han-Modular® for electricity, compressed air, Ethernet and emergency shut off
• OPC UA: Vertical integration between business applications and the manufacturing level
• Webserver: Fast transfer of large data volumes per https
• RFID: Digital product memory in cross-manufacturer OMM data format
• No direct connection between the modules
(neither mechanical, electrical nor in a communication sense)
• Modular system structure for flexible configuration of the production line
• Automatic neighborhood detection for an independent topology derivation
• Hot plugging capability for a real plug & produce
• Infrastructure backbone consisting of complex infrastructure switches
• Security components in the backbone for module protection
• Complete documentation of energy consumption and visual representation
• Transmission of physical plant status to digital factory
IND
UST
RIE
Smar
tFac
tory
KL
-Dem
onst
rato
r4.
0
®
Boschuere Partner_ENGLISH_Layout 1 27.03.14 11:53 Seite 4
The CISCO Connected Factory Solu-tion is an end-to-end architecturespecifically designed, tested, and validated to provide predictable performance, security and system resiliency for industrial applications,from plant automation systems toenterprise management applica-tions.
Enhanced Plant Network Security
Improve Security through control ofplant network access by user and lo-cation with Identity Services.
Faster decision-making and
improved performance
Deliver real-time plant performanceinformation across the entire manu-facturing value chain.
CISCO Unified Communication
Connect globally dispersed businessorganizations by tightly integratingenterprise systems with plant floorsystems enabling faster and smarterdecisions.
Rapid Network Deployment
Quickly deploy a reliable, secure in-dustrial network with a tested anddocumented CISCO Validated Design.
Improved Uptime and Visibility
View dispersed and disparate systemsand device statuses in one place, inreal-time. Collaborate globally be-tween machines and people; suppli-ers and customers; design teams anddecision makers.
Short description of our contribution
CISCO shows how you can leverage the Connected Factory architecture toconverge IT and Operational Technology (OT) systems and create an integratedenterprise smart engine.
Our implementation of INDUSTRIE 4.0
CISCO provides a completeand unique breadth of infra-structure including wired andwireless routing and switching,IP video surveillance/monitor-ing, compute, and communi-cations solutions to uniquelysupport and enable currentand future INDUSTRIE 4.0 re-quirements.
SmartFactoryKL is the leadingedge consortia in transformingthe factory. Through its INDUS-TRIE 4.0 initiative and pilot, itwill demonstrate how innova-tive and emerging technolo-gies such as the Internet OfThings will empower the fac-tory of the future vision whilekeep pushing the research insubsequent manufacturingareas.
More information:
www.cisco.com
Why SmartFactoryKL
INDUSTRIE From Vision to Reality
Contact: Dr. Bernd Heinrichs, Managing Director IoT EMEA, Cisco SystemsE-mail: [email protected]
CONNECTED FACTORY
4.0
Cisco Industrial Ethernet 2000 Switching Family
CISCO
CISCO Connected Factory Solution
Boschuere Partnerseiten englisch_Layout 1 27.03.14 11:45 Seite 1
As a preliminary stage of cyber-phys-ical systems, the magazine modulesof the module Engraving areequipped with compact CoDeSys-Controllers (effectuators) and Ether-net interfaces to achieve fullfunctionality and to also allow self-diagnosis. During the process, the in-telligent Festo handling modulesinitialize the digital product memoryvia RFID with a production order. Thisproduction order is loaded througha http-protocol by the web server ofthe higher-level ERP-Systems via anespecially developed web client. Ac-cording to the product memory, anindividual engraving is applied witha CNC engraving control, whichmeans that the production of per-
Workpiece magazines with controller
sonalized products is implemented atthe module level. An integrated OPCUA server guarantees the problem-free interaction of different modulesbeyond proprietary limits. In this way,information about plant topology,workpiece-specific energy consump-tion, and status messages is trans-ferred.
The presented, already available tech-nologies offer advantages even todayregarding the development of mod-ular and flexible production plants,and very clearly point the way to INDUSTRIE 4.0.
Short description of our contribution
The module Engraving unloads the base plate of the business card holder andapplies an individual engraving to it via a CNC-controlled miniature millingmachine. Afterwards, the engraved base plate is rotated and provided on aworkpiece carrier for the further manufacturing process.
Our implementation of INDUSTRIE 4.0
Festo joined the manufacturer-independent technology ini-tiative SmartFactory KL e.V. in2013. The membership en-ables Festo to closely cooper-ate with other industrialenterprises and the science, aswell as adding a high practicalvalue because now we havethe opportunity to test and de-velop the interaction of intelli-gent components fromdifferent manufacturers andalso their mutual networkingunder real conditions.
The broad application of IN-DUSTRIE 4.0 will require newqualifications over the nextfew years. Festo Didactic takesaccount of this fact by devel-oping and providing appropri-ate teaching and researchplatforms. The SmartFactoryKL
membership ensures therecognition of relevant con-tent and their integration intoprofessional training and edu-cation after being didacticallyprepared.
More information:
www.festo.com
Why SmartFactoryKL
INDUSTRIE From Vision to Reality
Contact: Dipl.-Ing. Mathias Schietinger, Festo Didactic GmbH & Co. KGE-mail: [email protected], www.festo-didactic.com
MODULE ENGRAVING
4.0
Initializing the digital product memory via RFID
CoDeSys-Controller (Effectuator)
Passive workpiece carrier redirection for the rapid, modular construction of production lines
Rotating device for the engraved casing bottom
FESTO
Boschuere Partnerseiten englisch_Layout 1 27.03.14 11:46 Seite 3
Continuous interface standardiza-tion is the basis for modularizationwithin the context of INDUSTRIE 4.0and, therefore, the key for smart fac-tories. HARTING faces this challengewith a module in its own form factor,which offers us the opportunity toderive the special module task froman existing modular system and toconsequently realize it. Furthermore,module design according to themodular principle involves an easyand especially fast integration,meaning interoperability, into theSmartFactoryKL.
A smart factory requires a genericmodule infrastructure. The Han-Modular® connector forms the
The interior of a Han-Modular® connector
electromechanical backbone. Oursmart Power Network Unit takes overthe management of data and powerand collects signals concerning theoperating status because only asmart infrastructure ensures the ad-ministration of all industrial lifelines.
Short description of our contribution
The HARTING module Force Fitting is the place for central assembly of the twocasing elements. Therefore, the base plate with a mounted RFID transponderand a holding bracket is provided from the adjacent module via integratedconveying systems. Through a robot, the HARTING module places the coveron the base plate and force fits the parts together.
Our implementation of INDUSTRIE 4.0
INDUSTRIE 4.0 is taking off.Summarized in one sentence,INDUSTRIE 4.0 leads to a trans-formation of today's factoriesinto smart factories.
Therefore, we are developingsolutions and testing themwithin the scope of smartfactories. The SmartFactoryKL
has a special status, because itoffers the possibility of compa-ring our competence withother providers. This not onlyresults in a higher degree of in-novation, but is also the basisfor the necessary standardiza-tion, because only in this wayinteroperability between diffe-rent automation modules canbe guaranteed. The client hasthe ability to select the manu-facturing module of the provi-der that is most suited to his orher needs, and that is alsomost effective at improvingtheir production efficiency.Furthermore, the integrationinto their own business IT ap-plications increases pro-duction flexibility. This requiresinterfaces like OPC UA, whichwe are testing in the scope ofthe SmartFactoryKL .
More information:
www.harting.com
Why SmartFactoryKL
INDUSTRIE From Vision to Reality
Contact: John M. Witt, System Application Manager smart Power Networks, HARTING Electric GmbH & Co. KGE-mail: [email protected]
MODULE FORCE FITTING
4.0
HARTING smart Power Network Unit to manage the infrastructure
Pallet system for casing cover and vacuum suction device
Han-Modular® connector as universal infrastructure interface
HARTING Module Force Fitting
HARTING
Boschuere Partnerseiten englisch_Layout 1 27.03.14 11:46 Seite 5
The new SmartFactoryKL Demonstra-tor requires an extremely efficientcommunication technology. Theseneeds go far beyond the usual ex-pectations of a production environ-ment. Large volumes of data have tobe transported, preferably in realtime. Numerous individual partici-pants have to be reliably integrated,and a very high data security is required.
For the SmartFactoryKL HIRSCHMANNand LUMBERG AUTOMATION devel-oped the infrastructure solutionConnected Security which includesinnovations from industrial commu-nication regarding instrumentation,control, actuator and sensor tech-nologies:
HiVision of HIRSCHMANN for the supervision and configuration of production lines
• Security solution of the EAGLE series allows communication within and between the manufac-turing modules
• Manageable I/O modules of the LION series connect the control with the sensor level
• Associated cable and connector solutions
• The HiVision management tool monitors and configures the production line
Short description of our contribution
Optimized innovations of industrial communication regarding instrumenta-tion, control, actuator, and sensor technologies are the distinguishing featuresof the HIRSCHMANN and LUMBERG AUTOMATION infrastructure solutionConnected Security. It is characterized by coordinated solutions from securenetwork devices, manageable I/O modules, connectors, and conductors.
Our implementation of INDUSTRIE 4.0
Today, we know that industrialneeds in connection with IN-DUSTRIE 4.0 will change signif-icantly. Data volumes in everyarea of automation technologywill increase because of intelli-gent machines, sensors andactuators. The various manu-facturing modules of diversemanufacturers have to cooper-ate in complex productionlines. At the same time, thehighest standards regardingdata security and data reliabil-ity have to be guaranteed.
The new SmartFactoryKL-De-monstrator fulfills these new,industrial requirements for thefirst time.
HIRSCHMANN and LUMBERGAUTOMATION as the worldleading manufacturers of inno-vative security technologiesfor distribution and processingof industrial communicationensure the reliable operationof the SmartFactoryKL -Demon-strator.
More information:
www.hirschmann.comwww.lumberg-automation.com
Why SmartFactoryKL
INDUSTRIE From Vision to Reality
Contact: Dr. John V. Herold, Vice President Marketing, Belden ElectronicsE-mail: [email protected], www.belden.com
CONNECTED SECURITY
4.0
I/O Module of the LION line of LUMBERG AUTOMATION
Network ready control lines of BELDEN
Connected Security in the SmartFactoryKL Infrastructure Backbone
Security solution of the EAGLE series of HIRSCHMANN
HIRSCHMANN
Boschuere Partnerseiten englisch_Layout 1 27.03.14 11:46 Seite 7
The LAPP module Quality Controlaims to perform the final inspectionand the commissioning. Quality iscontrolled by using a high-resolutioncamera, which reviews the correctassembling of the produced busi-ness card holder via contour recog-nition. The result of quality control isstored on the product RFID tag. Atwin axle “pick and place” unit is re-sponsible for the separation ofgood/bad parts and the issuance ofthe finished product to the visitor.
According to the vision of INDUSTRIE4.0, the module was realized with acomplete networking with IndustrialEthernet. The connection up to thesensor / actor level presented an
Issuance of the final product to the visitor
especially challenging problem be-cause of the high robustness require-ments regarding cables andconnecting systems, and was suc-cessfully implemented with the LAPPmodule.
Short description of our contribution
The LAPP module Quality Control performs two different tasks: the final in-spection of the product using a high-resolution camera, and the commissio-ning of the finished business card holder. According to the vision of INDUSTRIE4.0, the module was realized with a focus on a complete networking with In-dustrial Ethernet.
Our implementation of INDUSTRIE 4.0
As a solution provider of ca-bling and connecting systemsfor industrial automation tech-nologies, it is very importantfor LAPP to understand theproduct environment in whichour products are and wherethey might be applied in thefuture. For this reason, we payclose attention to INDUSTRIE4.0 and are involved in thetechnology initiative Smart-Factory KL e.V. The manufac-turer-independent initiativeclearly points out the benefitsof using modern informationtechnology in production en-vironments. Manufactures likeLAPP have the opportunity to develop and test new solu-tions for future mechanical engineering in the SmartFacto-ryKL.
LAPP already offers completesolutions for all connections insmart factories.
More information:
www.lappkabel.de/industrie-4
Why SmartFactoryKL
INDUSTRIE From Vision to Reality
Contact: Dipl.-Wirtsch.-Ing. (FH) Ralf Moebus, U.I. Lapp GmbHE-mail: [email protected]
MODULE QUALITY CONTROL
4.0
Intelligent gripper system with highly flexible Ethernet cables
Final inspection and commissioning of the business card holder
High-resolution camera system with Ethernet
LAPP KABEL
Boschuere Partnerseiten englisch_Layout 1 27.03.14 11:46 Seite 9
MiniTec is participating as a centralcross-section partner in the newSmartFactoryKL-Demonstrator. TheMiniTec components Manual Work-station and Basic Module are madeup of the established MiniTec alu-minum profiles. The manual worksta-tion serves the final assembly andcontrol, the basic module is the com-mon horizontal platform for the re-spective superstructures of theproject partners.
The MiniTec manual workstation isan essential part of the new Smart-FactoryKL-Demonstrator. When pro-duction processes become in-creasingly linked and more efficientand individual, humans should not
Electrically height-adjustable workstation – practical and ergonomic thanks to the MiniTec modular system
step back: MiniTec achieves thisthrough an ergonomic manual work-station electrically adjustable inheight, which offers space for toolsand accessories and is equipped witha rack located within easy reach forthe MiniTec KanTainer system. Fur-thermore, it is ready to incorporatethe control and regulatory systemswhich make the SmartFactoryKL thepioneer in implementing next-gener-ation INDUSTRIE 4.0 technologies.
Short description of our contribution
The Manual Workstation is a height-adjustable, ergonomically designed sys-tem workplace consisting of MiniTec aluminum profiles. Equipped with twolockable casters, it is extremely flexible. Here, the business card holder is as-sembled using augmented-reality-based guidance and the quality is finallycontrolled.
Our implementation of INDUSTRIE 4.0
„The future of industrial pro-duction lies in flexible andadaptable factories. The trendis moving towards highly indi-vidual products and their effi-cient and ergonomic man-ufacturing.
Individuality, efficiency and er-gonomics have always charac-terized our products andsystem solutions. Therefore, ithas been a particular concernof MiniTec to demonstrate itscompetence in the technologyinitiative SmartFactory KL e.V.in the scope of a module part-nership. Being a member ofthe SmartFactoryKL is an incen-tive and, at the same time, anobligation for us to continue toimpress with our innovativeand future-oriented solutions.”
Peter Müller, project manager
SmartFactoryKL at MiniTec
More information:
www.minitec.de
Why SmartFactoryKL
INDUSTRIE From Vision to Reality
Contact: Timo Graf, MiniTec GmbH & Co. KG, Communication ManagerE-mail: [email protected]
MANUAL WORKSTATION
4.0
Necessary tools are within reach – direct access to electrical-, USB- and Ethernet-connections is granted
MiniTec workstations – an exemplary in design andfunction thanks to the MiniTec modular system
The MiniTec KanTainer system
MINITEC
Boschuere Partnerseiten englisch_Layout 1 27.03.14 11:46 Seite 11
PHOENIX CONTACT is a world marketleader for components, systems andsolutions regarding the area of elec-trical engineering, electronics andautomation. Today, the family com-pany employs 13.000 people world-wide. Its headquarters are located inBlomberg (North Rhine-Westphalia).Nine enterprises and 50 individualsales companies form part of thePHOENIX CONTACT group.
We produce in nine countries world-wide with a high level of vertical in-tegration. Therefore, PHOENIXCONTACT as a manufacturer of com-ponents and operator of productionplants knows the challenges of IN-DUSTRIE 4.0 very well.
In-house engineering with expert knowledge
Our own mechanical engineering de-partment provides us expert knowl-edge in processes and automation.We plan, build and test the intelligentproduction – in our own productionplants with latest technologies and inclose cooperation with our cus-tomers. We demonstrate our manyyears of experience regarding au-tomation technology with IT-poweredAutomation. We especially invest andconduct research in the areas of com-munication and information technol-ogy, web technology, security andsafety, installation and engineering.
Three good reasons why PHOENIXCONTACT is the ideal partner for IN-DUSTRIE 4.0
Short description of our contribution
The Module Laser Marking engraves the top side of the business card holderindividually through a laser marking system. The product itself delivers all information needed independently to the module using its digital productionmemory. Before and after the processing step, the production memory is readand updated via RFID.
Our implementation of INDUSTRIE 4.0
The technology initiativeSmartFactory KL e.V. offers aplatform in which we can vali-date, develop and optimizeour modular and flexible IN-DUSTRIE 4.0 concepts and ap-proaches for our customersunder realistic conditions andin a heterogeneous environ-ment with different partners.This allows us to achieve themaximum compatibility of ourproducts and solutions to de-sign cross-manufacturer andinteroperable systems andplants promoted by a verticaland horizontal, non-constrai-ning information exchange.
Therefore, we need the digitalitem description to representthe product and the pro-duction chain in a comprehen-sive and transparent way.
More information:
www.phoenixcontact.com
Why SmartFactoryKL
INDUSTRIE From Vision to Reality
Contact: Dipl.-Ing. Holger Krings, PHOENIX CONTACT GmbH & Co. KG, Corporate TechnologyE-mail: [email protected]
MODULE LASER MARKING
4.0
Lot size "1" by individualized laser marking
PHOENIX CONTACT Industrial PC
PHOENIX CONTACT
Production know how due to high vertical integration
Strong experience in IT-powered Automation
Boschuere Partnerseiten englisch_Layout 1 27.03.14 11:47 Seite 13
proALPHA®’s service-oriented inte-gration platform ensures the homog-enous adaptation of differentservices. With the implementation ofINDUSTRIE 4.0, the Internet of Thingsarrives at the factories. INDUSTRIE 4.0is characterized by the vertical inte-gration of the ERP system into pro-duction and the horizontal, cross-manufacturer networking of differ-ent systems.
In order to demonstrate the future,possible changes and the implemen-tation of concrete solutions, proAL-PHA synchronized the currentresearch results. Due to proprietarytechnology and function develop-ment, "adaptive services in net-
proALPHA® – technology platform for INDUSTRIE 4.0
worked manufacturing environ-ments" as an important item for thefuture project of INDUSTRIE 4.0 canactively be realized in the scope ofthe top cluster competition.
Short description of our contribution
The proALPHA infrastructure solution ERP-System as the central system to manage, organize and control all business processes of a company has a crucialrole to play. Based on a service-oriented integration platform, proALPHA® ensures the relevant horizontal and vertical connection between subsystems.
Our implementation of INDUSTRIE 4.0
Due to increasing automationin production and cross-com-pany process control betweensystems, the issue of smart fac-tories is becoming more andmore important. Higher-levelERP-Systems will be embed-ded more deeply in produc-tion or even more linkedtogether. Delivery times haveto be reduced, despite grow-ing product diversity and de-creasing lot sizes. Correspon-ding real-time processing re-quires an even more flexibleplanning and control of thewhole manufacturing processtailored to continuously chan-ging customer priorities.
For proALPHA, it is importantto address the challenges offuture needs at an early stage.As a partner of the technologyinitiative SmartFactory KL e.V.,we succeed in synchronizingresearch results at an earlystage and in developing fu-ture-oriented solutions. Thenew SmartFactoryKL-Demon-strator is an impressive example.
More information:
www.proalpha.com
Why SmartFactoryKL
INDUSTRIE From Vision to Reality
Contact: Steffen Rattke, Direktor Marketing der proALPHA Software GmbHE-mail: [email protected]
ERP-SYSTEM
4.0
proALPHA® – integrated, high functional solution based on an service-oriented integration platform
proALPHA® central management system in theSmartFactoryKL
PROALPHA
proALPHA® offers integrated engineering processes
Order entry in proALPHA®
Boschuere Partnerseiten englisch_Layout 1 27.03.14 11:47 Seite 15
Seamlessly horizontally and verti-cally networked automation soluti-ons: Rexroth already opens up newdegrees of freedom regarding theimplementation of INDUSTRIE 4.0The module Clip Mounting equip-ped with decentralized intelligence,open interfaces and its bridging bet-ween the world of IT and automa-tion, can easily be integrated intoevery INDUSTRIE 4.0 application. Thecontrol IndraMotion MLC can be pro-grammed via open core engineeringin diverse high-level languages andseamlessly exchanges informationwith the world of IT. Classical HMI orsmart devices are responsible foroperation and diagnosis. The RFIDsystem ID200 simplifies the data eva-
RFID-System ID200: simplifying data evaluation
luation. The control flexibly realizesthe tasks defined by the workpieceand performs the movements mostefficiently using compact modulesand linear systems.
Short description of our contribution
The Rexroth module Clip Mounting reads the product memory via RFID andautonomously takes over the mounting of a clip to the casing bottom of thebusiness card holder with the help of its decentralized intelligence. Throughopen core engineering, the open control of the module also performs functi-ons created in high-level languages and meets all the requirements of functio-nal safety.
Our implementation of INDUSTRIE 4.0
Rexroth already provides hard-and software for INDUSTRIE4.0-enabled automation solu-tions which are based on a de-centralized intelligence, opencommunication and program-ming languages. This allowsmachine manufacturers andusers to network automationhorizontally and vertically.With its module for the Smart-FactoryKL, Rexroth shows thatthe vision of INDUSTRIE 4.0 hasalready become reality. Besi-des technical standards, open-ness to Rexroth especiallymeans the willingness torealize completely new ideaswith users and machine manu-facturers in close partnership.Therefore, the technology ini-tiative SmartFactory KL e.V. of-fers the ideal platform.
More information:
www.boschrexroth.com
Why SmartFactoryKL
INDUSTRIE From Vision to Reality
Contact: Martin Hankel, Bosch Rexroth AGE-mail: [email protected]
MODULE CLIP MOUNTING
4.0REXROTH
Open for your ideas: IndraMotion MLCOpen Core Engineering – flexibility and efficiency in automation processes
Easy Handling: easier, faster and more efficient handling systems
REXOROTH Transfer Systems: versatile, robust, variable
Boschuere Partnerseiten englisch_Layout 1 27.03.14 11:47 Seite 17
For the development of cyber-physi-cal production systems, it is essentialto control the continuous use of in-formation and data across all stagesof development and added value.Cyber-physical production systems,in which individual production mo-dules independently organize andoptimize parts of production, needthe ability to simulate processes inadvance. Starting with a conceptual,digital modeling of the productionplant, every production system recei-ves in parallel with its real develop-ment stage, a virtual representationacross all development stages. Ascomplete digital data about theplant is provided to all decision ma-kers, concrete models for specificquestions to be simulated can be de-
Using simulation models allows to visualize and verify concepts in early developmentphases.
rived at any time. Due to this ability offuture autonomous productionplants, the technological complexityin industrial added-value processeswill increase significantly comparedto today's level. The control of thiscomplexity requires the developmentof corresponding software tools forthe design and construction of suchsystems and plants and their opera-tion. According to this task, SIEMENSresearches and develops the metho-dologies and modeling techniquesneeded.
Short description of our contribution
In the infrastructure solution Product Lifecycle Management, all informationbecoming available during the product development process of the businesscard holder is seamlessly integrated into a coherent data structure. Due to thisconvergence, a superior platform is created which, as a central system of record, enables the support of diverse data needs.
Our implementation of INDUSTRIE 4.0
A fundamental part of our ac-tivities as the market leader inthe field of industrial automa-tion is the implementation ofan integrated engineeringprocess for our customers inthe sector of mechanical andindustrial engineering andtheir customers, e.g., in the au-tomotive industry. The task isthe implementation of the ap-proach of "Digital Enterprise",and SIEMENS develops andprovides the corresponding in-dustry software. The INDUS-TRIE 4.0 brought this issueback into focus. Therefore, thetechnology initiative Smart-Factory KL e.V. offers a verygood demonstrator and re-search platform to illustrate aclearly practical and gradualimplementation. It is ab-solutely essential that long-term development andmodification, which come veryclose to real conditions, are in-tended.
More information:
www.siemens.com
Why SmartFactoryKL
INDUSTRIE From Vision to Reality
Contact: Dr. Stefan Boschert, Siemens AG, Corporate Technology, Research & Technology CenterE-mail: [email protected]
PRODUCT LIFECYCLE MANAGEMENT
4.0SIEMENS
der Feder
Digital Twin
Siemens PLM Software’s Tecnomatix enables the creationof swept volume cocoons
SPLM event driven technology CEE (Cyclic Event Evalua-tor) permits for continuous simulation to be run for aanalysis of system cycle time.
Boschuere Partnerseiten englisch_Layout 1 27.03.14 11:47 Seite 19