INCRA...The only table saw fence with Automatic Positioning Control INCRA® Patented Precision...
Transcript of INCRA...The only table saw fence with Automatic Positioning Control INCRA® Patented Precision...
The only table saw fence with The only table saw fence with Automatic Positioning Control™Automatic Positioning Control™
INCRA®
Patented Precision Woodworking Tools
MITER 5000 - SHOPSMITH EDITION
IMPORTANT - PLEASE READ BEFORE ASSEMBLY
Your new Miter 5000 Shopsmith Edition is specifi cally confi gured for, and MUST be used in the Right Hand Miter Slot of your Shopsmith Mark V workstation.
DO NOT assemble for use in the left hand miter slot as shown in the enclosed ownerʼs manual.
During assembly, when the ownerʼs manual makes reference to the right miter slot, instead perform the assembly instruction in the left miter slot. Conversely, when the ownerʼs manual calls for the left miter slot, perform the assembly instruction in the right miter slot.
Refer to the photo below to maintain proper orientation during assembly.