Engineered Water Treatment Solutions

HRO 3.5 Series Reverse Osmosis Systems

HRO 3.5-300Wall Mount

Reverse Osmosis System

HRO 3.5-300Reverse Osmosis Systemwith Optional 20” Standand 20” Filter Housings

HRO 3.5-Series Reverse Osmosis Systems are manufactured for light commercial applications and feature a compact wall mount space-saving design. The HRO 3.5-Series come pre-assembled and ready for immediate on-line service with minimal set up and simple utility connections.

HRO 3.5-Series Reverse Osmosis Systems have been engineered for capacities of 200 and 300 gallons per day and feature a single pump design for enhanced performance.

Features5 Micron Sediment Pre-Filter10 Micron Carbon Block Pre-Filter and Post-FilterPentek® 10” Filter HousingsHF4 Extra Low Energy MembraneFiberglass Membrane Housing0 – 300 psi Glycerin-Filled Pump Pressure Gauge0 – 100 psi Glycerin-Filled Pre-Filter Pressure Gauge0 – 100 psi Glycerin-Filled Permeate Pressure GaugeJohn Guest® Push/Pull Fittings with Locking Safety ClipsAquatec® High Flow Booster PumpAquatec® Tank Pressure SwitchAquatec® Feed Solenoid ValveAquatec® Auto Flush Timer Valve

Options and Upgrades10” and 20“ Floor StandsProduct Water Storage TanksHF5 Ultra Low Energy Membrane (For Cold Water Applications)Stainless Steel Membrane HousingHM Digital® DM-2 TDS MeterPentek® 20” Filter Housings

HRO 3.5-300

HRO 3.5-200

Single PassTDS <1000

40%

98.5%0.14 / 0.530.21 / 0.79

3/8 Tube3/8 Tube3/8 Tube

11

2514

11

Aquatec 8800

110V, 60Hz, 1Ph, 1.0A220V, 50Hz, 1Ph, 0.5A

9 x 20 x 19 / 22.9 x 50.8 x 48.342 / 19.1

HRO 3.5-300

Single PassTDS <1000

50%

98.5%0.21 / 0.790.21 / 0.79

3/8 Tube3/8 Tube3/8 Tube

11

2521

11

Aquatec 5800

110V, 60Hz, 1Ph 1.0A220V, 50Hz, 1Ph, 0.5A

9 x 27 x 19 / 22.9 x 68.6 x 48.350 / 22.7

*

77°F 185°F 040°F 1,000

120°F 140°F 1185 345 12

120 2<3

Operating Limits

Product flow and recovery rates are based on feedwater conditions of 550 TDS at 77°F at 100 psi. Treatment ability of the RO system is dependent on feedwater quality. Higher TDS and/or lower temperatures will reduce product flow. Performance projections should be run for each installation.

DesignConfigurationFeed Water Source (ppm)Standard Recovery*Rejection and Flow RatesNominal Salt RejectionPermeate Flow* (gpm / lpm)Concentrate Flow (gpm / lpm)ConnectionsFeed (in)Permeate (in)Concentrate (in)MembranesMembrane Per VesselMembrane QuantityMembrane SizeVesselsVessel ArrayVessel QuantityPumpsPump TypeElectricalStandard VoltageVoltage OptionsSystem DimensionsL x W x H (in / cm)Weight (lb / kg)

HRO 3.5 Series Reverse Osmosis Systems

PRODUCT SPECIFICATIONS

Max. Turbidity NTU ^Max. Free Chlorine ppmMax. TDS ppmMax. Hardness GPG ^^Max. pH (Continous)Min. pH (Continuous)Max. pH (Cleaning 30 Min.)Min. pH (Cleaning 30 Min.)

Design TemperatureMax. Feed TemperatureMin. Feed TemperatureMax. Ambient TemperatureMin. Ambient TemperatureMax. Feed Pressure psiMin. Feed Pressure psiMax. Operating Pressure psiMax. SDI Rating

Test Parameters: Static pressure tested.^Appropriate filtration must be installed in order to prevent premature membrane fouling.^^Scale prevention measures must be taken to prolong membrane life.

Hellenbrand, Inc.404 Moravian Valley Road Waunakee, WI 53597 www.hellenbrand.com

Hellenbrand products are not for sale or distribution into the State of California effective 8/31/18.