Heidra 100 SG Hydraulic Submersible Pump Heidra 100 SG · 2016-04-18 · Heidra 100 SG Hydraulic...
Transcript of Heidra 100 SG Hydraulic Submersible Pump Heidra 100 SG · 2016-04-18 · Heidra 100 SG Hydraulic...
Picture 11
Features Specifications Inlet diameter 100 mm with strainer
Discharge connection 100 mm (4" BS10 Table 'D')
Max capacity 209 m³/hr Max Head 30 metres
Solids handling 45 mm
Impeller diameter 214 mm Max operating temp 80 °C
Max working pressure 3.1 Pressure (bar)
Max suction pressure 2.5 Pressure (bar) Max casing pressure 4.7 Pressure (bar)
Max operating speed 2300 rpm
Fuel tank capacity 72 litres
Heidra 100 SG Hydraulic Submersible Pump
Heid
ra 1
00 S
GFuel consumption (BEP) 11.7 kW @ 2000 rpm
he Godwin Heidra 100 SG hydraulic submersible pump is a compact self-contained pumping unit featuring a diesel driven power pack and 4'' hydraulic pump end. With variable speed diesel engine power, the Heidra 100 SG can meet a variety of flow and head requirements up to 209 m³/hr and total dynamic head requirements up to 30 metres.
It has the ability to handle solids up to 45 mm in diameter. It also has dry running capabilities, a cast chromium steel impeller, providing a rugged dewatering / solids handling, hydraulic submersible pump ready to go anywhere.
Open solid handling impellers with replaceable wearplates. 3.3 litres/hour
100 mm discharge connection. The quick release lever allows pipe work to be connected & disconnected very easily. Double mechanical seal in its own clean oil bath allows for indefinite dry running. Inboard seal: silicon carbide. Outboard seal: carbon or ceramic.Gear motor connections are standard two-bolt SAE flange & shaft. Which allows the bearing bracket to plug directly together.Standard impeller is designed for general pumping, slurries and sludges.
Safe pump end no risk of electric shock or explosion.
Alternative options available e.g. Highway trailer, Site trolley.
Simple and reliable operation, no valves & requires little maintenance.
T
Jansen Pompentechniek T: +31(0)485-371318 E: [email protected]
Performance Curve
Materials
Wearplates
Pump Shaft
Impeller
Power pack - GHPU10 Pump endEngine : Perkins 403D-15 (16.5 kW @ 2000 rpm) Drive pressure 250 Pressure (bar)
Engine speed 2000 rpm Pump speed 1770 rpm
Hydraulic motor Gear type Hydraulic motor Gear type
Hydraulic pump displacement 15 cc/rev Hydraulic motor displacement 15 cc/rev
Output flow 28 l/min Flow 28 l/min
Wet weight 945 kg Wet Weight 145 kg
Hydraulic reservoir capacity 40 litres
Power pack dimensions Pump end dimensionsLength 1300 mm Length 442 mm
Width 680 mm Width 315 mm
Height 1900 mm Height 825 mm
Drawing2
Hydraulic Hose Acoustic information40YEAR
1 m 3 m 7 m71 66 6379 69 6476 70 65
Maximum hose lengthsEngine (rpm) 1700 2100 2200 2400
Max Length (mtrs) 40 35 30 20
Pump casing
Average Sound Pressure rating (dbA)
Heid
ra 1
00 S
G
Cast Iron to BS1452 Grade 220 Nitrided.Carbon Steel BS 970-3:1991 080M40
Speed(rpm)
Cast iron to BS1452 Grade 220.
2000
Cast Steel BS 3100:1991 Grade BW2.
Suction Strainer and Lifting Bracket
Fabrication Mild Steel tube and plate.
Silicon Carbide vs Silicon Carbide
Mechanical Seal Faces
18001200
Feed/Return
Bleed Line
13 mm (½") BSP x 16 mm (⅝") NB pipe.
10 mm (⅜") BSP x 10 mm (⅜") NB pipe. Perkins
403D-15 Hushpac
Engine PUMP
1800 (1683) rpm
1600 (1496) rpm
Minimum capacity limitation
2000 (1870) rpm
0
20
40
60
80
100
0 100 200 300 400 500 600 700 800
0
5
10
15
20
25
30
35
0 25 50 75 100 125 150 175 200 225
Head
(fee
t)
Flow (Gal/min)He
ad (m
etre
s)
Flow (m³/hr)
Engine (Pump) rpm
Heidra 100 SG Perkins 403D-15
Assessed to ISO 9001:2008Certificate N° 1027
Jansen Pompentechniek T: +31(0)485-371318 E: [email protected]
Picture 12
Features Specifications Inlet diameter 150 mm with strainer
Discharge connection 150 mm (6" BS10 Table 'D')
Max capacity 430 m³/hr Max Head 22 metres
Solids handling 65 mm
Impeller diameter 280 mm Max operating temp 80 °C
Max working pressure 2.2 Pressure (bar)
Max suction pressure 1.7 Pressure (bar) Max casing pressure 3.4 Pressure (bar)
Max operating speed 2200 rpm
Fuel tank capacity 170 litres
Heidra 150SG Hydraulic Submersible Pump
Heid
ra 1
50SG
Fuel consumption (BEP) 10.1 kW @ 2000 rpm
he Godwin Heidra 150SG hydraulic submersible pump is a compact self-contained pumping unit featuring a diesel driven power pack and 6'' hydraulic pump end. With variable speed diesel engine power, the Heidra 150SG can meet a variety of flow and head requirements up to 430 m³/hr and total dynamic head requirements up to 22 metres.
It has the ability to handle solids up to 65 mm in diameter. It also has dry running capabilities, a cast chromium steel impeller, providing a rugged dewatering / solids handling, hydraulic submersible pump ready to go anywhere.
Open solid handling impellers with replaceable wearplates. 3.8 litres/hour
150 mm discharge connection. The quick release lever allows pipe work to be connected & disconnected very easily. Double mechanical seal in its own clean oil bath allows for indefinite dry running. Inboard seal: silicon carbide. Outboard seal: carbon or ceramic.Gear motor connections are standard two-bolt SAE flange & shaft. Which allows the bearing bracket to plug directly together.Standard impeller is designed for general pumping, slurries and sludges.
Safe pump end no risk of electric shock or explosion.
Alternative options available e.g. Highway trailer, Site trolley.
Simple and reliable operation, no valves & requires little maintenance.
T
Jansen Pompentechniek T: +31(0)485-371318 E: [email protected]
Performance Curve
Materials
Wearplates
Pump Shaft
Impeller
Power pack - GHPU30 Pump endEngine : Perkins 404D-22 (25.1 kW @ 2000 rpm) Drive pressure 250 Pressure (bar)
Engine speed 2000 rpm Pump speed 1420 rpm
Hydraulic motor Gear type Hydraulic motor Gear type
Hydraulic pump displacement 30 cc/rev Hydraulic motor displacement 35 cc/rev
Output flow 30 l/min Flow 30 l/min
Wet weight 1,052 kg Wet Weight 180 kg
Hydraulic reservoir capacity 65 litres
Power pack dimensions Pump end dimensionsLength 1800 mm Length 785 mm
Width 520 mm Width 500 mm
Height 570 mm Height 860 mm
Drawing14
Hydraulic Hose Acoustic information40YEAR
1 m 3 m 7 m71 66 6374 69 6476 70 65
Maximum hose lengthsEngine (rpm) 1500 1800 2000 2200
Max Length (mtrs) 50 40 35 30
Pump casing
Average Sound Pressure rating (dbA)
Heid
ra 1
50SG
Cast Iron to BS1452 Grade 220 Nitrided.Carbon Steel BS 970-3:1991 080M40
Speed(rpm)
Cast iron to BS1452 Grade 220.
2200
Cast Steel BS 3100:1991 Grade BW2.
Suction Strainer and Lifting Bracket
Fabrication Mild Steel tube and plate.
Silicon Carbide vs Silicon Carbide
Mechanical Seal Faces
18001200
Feed/Return
Bleed Line
19 mm (¾") BSP x 19 mm (¾") NB pipe.
10 mm (⅜") BSP x 13 mm (½") NB pipe. Perkins
404D-22 Hushpac
Engine PUMP
2000 (1340) rpm
1800 (1206) rpm
1600 (1072) rpm
Minimum capacity limitation
2200 (1474) rpm
0
20
40
60
80
0 200 400 600 800 1000 1200 1400 1600
0
5
10
15
20
25
0 50 100 150 200 250 300 350 400 450
Head
(fee
t)
Flow (Gal/min)He
ad (m
etre
s)
Flow (m³/hr)
Engine (Pump) rpm
Heidra 150SG Perkins 404D-22
Assessed to ISO 9001:2008Certificate N° 1027
Jansen Pompentechniek T: +31(0)485-371318 E: [email protected]
Picture 13
Features Specifications Inlet diameter 150 mm with strainer
Discharge connection 150 mm (6" BS10 Table 'D')
Max capacity 520 m³/hr Max Head 47 metres
Solids handling 65 mm
Impeller diameter 280 mm Max operating temp 80 °C
Max working pressure 4.8 Pressure (bar)
Max suction pressure 1.7 Pressure (bar) Max casing pressure 7.1 Pressure (bar)
Max operating speed 2200 rpm
Fuel tank capacity 390 litres
Safe pump end no risk of electric shock or explosion.
Alternative options available e.g. Highway trailer, Site trolley.
Simple and reliable operation, no valves & requires little maintenance.
Heidra 150MR SG Hydraulic Submersible Pump
Heid
ra 1
50M
R SG
Fuel consumption (BEP) 12.4 kW @ 2000 rpm
he Godwin Heidra 150MR SG hydraulic submersible pump is a compact self-contained pumping unit featuring a diesel driven power pack and 6'' hydraulic pump end. With variable speed diesel engine power, the Heidra 150MR SG can meet a variety of flow and head requirements up to 520 m³/hr and total dynamic head requirements up to 47 metres.
It has the ability to handle solids up to 65 mm in diameter. It also has dry running capabilities, a cast chromium steel impeller, providing a rugged dewatering / solids handling, hydraulic submersible pump ready to go anywhere.
Open solid handling impellers with replaceable wearplates. 6.1 litres/hour
150 mm discharge connection. The quick release lever allows pipe work to be connected & disconnected very easily. Double mechanical seal in its own clean oil bath allows for indefinite dry running. Inboard seal: silicon carbide. Outboard seal: carbon or ceramic.Gear motor connections are standard two-bolt SAE flange & shaft. Which allows the bearing bracket to plug directly together.Standard impeller is designed for general pumping, slurries and sludges.
T
Jansen Pompentechniek T: +31(0)485-371318 E: [email protected]
Performance Curve
Materials
Wearplates
Pump Shaft
Impeller
Power pack - GHPU30 Pump endEngine : Perkins 1104D-44T (54.7 kW @ 2000 rpm) Drive pressure 250 Pressure (bar)
Engine speed 2000 rpm Pump speed 1964 rpm
Hydraulic motor Gear type Hydraulic motor Gear type
Hydraulic pump displacement 60 cc/rev Hydraulic motor displacement 55 cc/rev
Output flow 100 l/min Flow 100 l/min
Wet weight 2,250 kg Wet Weight 185 kg
Hydraulic reservoir capacity 200 litres
Power pack dimensions Pump end dimensionsLength 2500 mm Length 785 mm
Width 1300 mm Width 520 mm
Height 1900 mm Height 1000 mm
Drawing15
Hydraulic Hose Acoustic information40YEAR
1 m 3 m 7 m72 67 6475 70 6577 71 66
Maximum hose lengthsEngine (rpm) 2000 2200 2400 2600
Max Length (mtrs) 40 35 30 20
Feed/Return
Bleed Line
25 mm (1") BSP x 25 mm (1") NB pipe.
13 mm (½") BSP x 13 mm (½") NB pipe. Perkins
1104D-44T Hushpac
Engine PUMP
Cast iron to BS1452 Grade 220.
2100
Cast Steel BS 3100:1991 Grade BW2.
Suction Strainer and Lifting Bracket
Fabrication Mild Steel tube and plate.
Silicon Carbide vs Silicon Carbide
Mechanical Seal Faces
18001400
Pump casing
Average Sound Pressure rating (dbA)
Heid
ra 1
50M
R SG
Cast Iron to BS1452 Grade 220 Nitrided.Carbon Steel BS 970-3:1991 080M40
Speed(rpm)
2000 (1963) rpm
1800 (1767) rpm
1600 (1571) rpm
Minimum capacity limitation
2200 (2160) rpm
0
10
20
30
40
50
60
70
80
90
100
110
120
130
140
150
160
170
180
0
5
10
15
20
25
30
35
40
45
50
55
0 50 100 150 200 250 300 350 400 450 500 550
Head
(fee
t)
Flow (Gal/min)He
ad (m
etre
s)
Flow (m³/hr)
Engine (Pump) rpm
Heidra 150MR SG Perkins 1104D-44T
Assessed to ISO 9001:2008Certificate N° 1027
Jansen Pompentechniek T: +31(0)485-371318 E: [email protected]
Picture 14
Features Specifications Inlet diameter 150 mm with strainer
Discharge connection 150 mm (6" BS10 Table 'D')
Max capacity 452 m³/hr Max Head 21 metres
Solids handling 125 mm
Impeller diameter 280 mm Max operating temp 80 °C
Max working pressure 2.4 Pressure (bar)
Max suction pressure 2.0 Pressure (bar) Max casing pressure 3.6 Pressure (bar)
Max operating speed 2200 rpm
Fuel tank capacity 390 litres
Heidra 150V SG Hydraulic Submersible Pump
Heid
ra 1
50V
SGFuel consumption (BEP) 41.8 kW @ 2000 rpm
he Godwin Heidra 150V SG hydraulic submersible pump is a compact self-contained pumping unit featuring a diesel driven power pack and 6'' hydraulic pump end. With variable speed diesel engine power, the Heidra 150V SG can meet a variety of flow and head requirements up to 452 m³/hr and total dynamic head requirements up to 21 metres.
It has the ability to handle solids up to 125 mm in diameter. It also has dry running capabilities, a cast chromium steel impeller, providing a rugged dewatering / solids handling, hydraulic submersible pump ready to go anywhere.
Open solid handling impellers with replaceable wearplates. 13.4 litres/hour
Fully recessed vortex impeller will handle solids up to 125 mm in diameter.
Double mechanical seal in its own clean oil bath allows for indefinite dry running. Inboard seal: silicon carbide. Outboard seal: carbon or ceramic.Gear motor connections are standard two-bolt SAE flange & shaft. Which allows the bearing bracket to plug directly together.Standard impeller is designed for general pumping, slurries and sludges.
Safe pump end no risk of electric shock or explosion.
Alternative options available e.g. Highway trailer, Site trolley.
Simple and reliable operation, no valves & requires little maintenance.
T
Jansen Pompentechniek T: +31(0)485-371318 E: [email protected]
Performance Curve
Materials
Wearplates
Pump Shaft
Impeller
Power pack - GHPU30 Pump endEngine : Perkins 1104D-44T (54.7 kW @ 2000 rpm) Drive pressure 250 Pressure (bar)
Engine speed 2000 rpm Pump speed 1860 rpm
Hydraulic motor Gear type Hydraulic motor Gear type
Hydraulic pump displacement 60 cc/rev Hydraulic motor displacement 60 cc/rev
Output flow 100 l/min Flow 100 l/min
Wet weight 2,250 kg Wet Weight 200 kg
Hydraulic reservoir capacity 200 litres
Power pack dimensions Pump end dimensionsLength 2500 mm Length 1500 mm
Width 1300 mm Width 500 mm
Height 1900 mm Height 950 mm
Drawing16
Hydraulic Hose Acoustic information40YEAR
1 m 3 m 7 m72 67 6475 70 6577 71 66
Maximum hose lengthsEngine (rpm) 1400 1600 1800 2000
Max Length (mtrs) 80 70 60 50
Pump casing
Average Sound Pressure rating (dbA)
Heid
ra 1
50V
SG
Cast Iron to BS1452 Grade 220.
Carbon Steel BS 970-3:1991 080M40
Speed(rpm)
Cast iron to BS1452 Grade 220.
2100
Cast Steel BS 3100:1991 Grade BW2.
Suction Strainer and Lifting Bracket
Fabrication Mild Steel tube and plate.
Silicon Carbide vs Silicon Carbide
Mechanical Seal Faces
18001400
Feed/Return
Bleed Line
25 mm (1") BSP x 25 mm (1") NB pipe.
13 mm (½") BSP x 13 mm (½") NB pipe. Perkins
1104D-44T Hushpac
Engine PUMP
1800 (1688) rpm
1600 (1500) rpm
1400 (1313) rpm
Minimum capacity limitation
2000 (1876) rpm
0
10
20
30
40
50
60
70
80
90
0 200 400 600 800 1000 1200 1400 1600 1800
0
5
10
15
20
25
30
0 50 100 150 200 250 300 350 400 450 500
Head
(fee
t)
Flow (Gal/min)He
ad (m
etre
s)
Flow (m³/hr)
Engine (Pump) rpm
Heidra 150V SG Perkins 1104D-44T
Assessed to ISO 9001:2008Certificate N° 1027
Jansen Pompentechniek T: +31(0)485-371318 E: [email protected]
Picture 15
Features Specifications Inlet diameter 200 mm with strainer
Discharge connection 200 mm (8" BS10 Table 'D')
Max capacity 691 m³/hr Max Head 40 metres
Solids handling 75 mm
Impeller diameter 290 mm Max operating temp 80 °C
Max working pressure 4.1 Pressure (bar)
Max suction pressure 1.5 Pressure (bar) Max casing pressure 6.1 Pressure (bar)
Max operating speed 2200 rpm
Fuel tank capacity 390 litres
Heidra 200SG Hydraulic Submersible Pump
Heid
ra 2
00SG
Fuel consumption (BEP) 57.7 kW @ 2000 rpm
he Godwin Heidra 200SG hydraulic submersible pump is a compact self-contained pumping unit featuring a diesel driven power pack and 8'' hydraulic pump end. With variable speed diesel engine power, the Heidra 200SG can meet a variety of flow and head requirements up to 691 m³/hr and total dynamic head requirements up to 40 metres.
It has the ability to handle solids up to 75 mm in diameter. It also has dry running capabilities, a cast chromium steel impeller, providing a rugged dewatering / solids handling, hydraulic submersible pump ready to go anywhere.
Open solid handling impellers with replaceable wearplates. 18.4 litres/hour
Bearings are independent from the hydraulic gear motor – pump loads in no way affect gear motor performance.
Double mechanical seal in its own clean oil bath allows for indefinite dry running. Inboard seal: silicon carbide. Outboard seal: carbon or ceramic.Gear motor connections are standard two-bolt SAE flange & shaft. Which allows the bearing bracket to plug directly together.Standard impeller is designed for general pumping, slurries and sludges.
Safe pump end no risk of electric shock or explosion.
Alternative options available e.g. Highway trailer, Site trolley.
Simple and reliable operation, no valves & requires little maintenance.
T
Jansen Pompentechniek T: +31(0)485-371318 E: [email protected]
Performance Curve
Materials
Wearplates
Pump Shaft
Impeller
Power pack - GHPU50 Pump endEngine : Perkins 1104D-E44TA (74.1 kW @ 2000 rpm) Drive pressure 250 Pressure (bar)
Engine speed 2000 rpm Pump speed 1940 rpm
Hydraulic motor Piston Hydraulic motor Piston
Hydraulic pump displacement 100 cc/rev Hydraulic motor displacement 100 cc/rev
Output flow 190 l/min Flow 190 l/min
Wet weight 2,250 kg Wet Weight 380 kg
Hydraulic reservoir capacity 300 litres
Power pack dimensions Pump end dimensionsLength 2500 mm Length 850 mm
Width 1300 mm Width 725 mm
Height 1900 mm Height 1300 mm
Drawing17
Hydraulic Hose Acoustic information40YEAR
1 m 3 m 7 m73 67 6677 71 6879 78 76
Maximum hose lengthsEngine (rpm) 1500 1800 2000 2200
Max Length (mtrs) 50 40 35 30
Pump casing
Average Sound Pressure rating (dbA)
Heid
ra 2
00SG
Cast Iron to BS1452 Grade 220 Nitrided.Carbon Steel BS 970-3:1991 080M40
Speed(rpm)
Cast iron to BS1452 Grade 220.
2200
Cast Steel BS 3100:1991 Grade BW2.
Suction Strainer and Lifting Bracket
Fabrication Mild Steel tube and plate.
Silicon Carbide vs Silicon Carbide
Mechanical Seal Faces
20001400
Feed/Return
Bleed Line
32 mm (1¼") Quick Disconnect.
13 mm (½") Quick Disconnect. Perkins 1106D-E66TA (129)
Engine PUMP
1800 (1710) rpm
1600 (1520) rpm
Minimum capacity limitation
2000 (1900) rpm
0
20
40
60
80
100
120
140
160
0 400 800 1200 1600 2000 2400 2800
0
10
20
30
40
50
0 100 200 300 400 500 600 700 800
Head
(fee
t)
Flow (Gal/min)He
ad (m
etre
s)
Flow (m³/hr)
Engine (Pump) rpm
Heidra 200SG Perkins 1104D-E44TA
Assessed to ISO 9001:2008Certificate N° 1027
Jansen Pompentechniek T: +31(0)485-371318 E: [email protected]