Slide 1

HDS GEN2 (Keypad) Version 4.0 Software Update 4.0-45.2.200 Slide 2 Features Navico Company Confidential2 This Software update will give the following features: Support for the new Lowrance Outboard Pilot Control the autopilot from the screen of the HDS Gen2 Navigate routes/to a waypoint/to a cursor/vessel heading Integrated turn patterns for trolling Support for C-MAP MAX-N+ 2015 cartography Adds Detailed Marina Charts/Aerial Photography/High Resolution Satellite Imagery/Dynamic Raster Charts/and much more For more information on C-MAP MAX-N+ 2015 2015 http://c-map.jeppesen.com/us/marine-navigation/chart-plotters/c-map-max-n Slide 3 Lowrance Outboard Autopilot Slide 4 Lowrance Outboard Pilot Navico Company Confidential4 Outboard Pilot is an HDS Autopilot add-on system designed for boats up to 30ft with single outboard motor. System packs contain everything you need to fit an Autopilot to Hydraulic or Cable steer outboard motors. Walleye/Multi species Runabout Trailer boat Slide 5 Outboard Pilot - Product Description This product range comprises the following: NAC-1 Autopilot Computer POINT-1AP Heading and GPS sensor PUMP-1 Reversible Hydraulic Pump OR- HELM-1 Cable steer drive unit SmartSteer TM User Interface for HDS GEN2 For more details Visit: http://www.lowrance.com/en-US/Products/Auto-Steering/ Slide 6 SmartSteer Interface Outboard Pilot steering modes: Auto: Steers the boat automatically to a set heading Adjust Port/Starboard in 1 or 10 degree increments Navico Company Confidential6 Slide 7 SmartSteer Interface Outboard Pilot steering modes: Turn patterns: pre-set trolling patterns Sub-menu of the Auto mode Navico Company Confidential7 Slide 8 SmartSteer Interface Outboard Pilot steering modes: Course: Steers the boat automatically along a calculated track using heading and GPS position Adjust Port/Starboard in 1 or 10 degree increments Navico Company Confidential8 Slide 9 SmartSteer Interface Outboard Pilot steering modes: Nav: Steers the boat automatically along pre- defined route, to a waypoint or to cursor location Cancel navigation, restart the route, skip a point Navico Company Confidential9 Slide 10 SmartSteer Interface Outboard Pilot steering modes: Power steer: Manual control of the direction of the outboard motor. Virtual steering wheel Control the motor angle port/starboard Navico Company Confidential10 Slide 11 Charting Feature Enhancements C-MAP MAX-N+ 2015 Slide 12 C-MAP MAX-N+ 2015 Software version 4.0 will give HDS Gen2 the following features when using Jeppesen CMAP-MAX-N+ 2015: User selectable chart view No Contours: Shaded Relief and POIs 2D: No Shaded Relief, but full contours and POIs Raster: Traditional paper chart look Shaded Relief: Full Shaded Relief, 2D contours and POIs 12 Navico Company Confidential * All features shown in this brief are pending available data on the individual mapping cards Slide 13 C-MAP MAX-N+ 2015 13 Navico Company Confidential No Contours2D RasterShaded Relief Slide 14 C-MAP MAX-N+ 2015 Photo Overlay (Shaded Relief, No Contours or Raster) Adjust transparency between the photo overlay and the underlying map 14 Navico Company Confidential Photo Overlay: Full Photo Overlay: Land Only Slide 15 C-MAP MAX-N+ 2015 Aerial Photos These photos provide a birds eye view of marinas, harbors, channel entrances and other features 15 Navico Company Confidential Aerial Photo Symbol on Chart Highlight the Photo Icon with the cursor. Press Enter then Select Image Slide 16 C-MAP MAX-N+ 2015 High Resolution Bathymetry (2D and Shaded Relief mode) User selection enable/disable the high resolution contour lines on the chart 16 Navico Company Confidential High Resolution Bathymetry: Off High Resolution Bathymetry : On Slide 17 C-MAP MAX-N+ 2015 User selectable depth palette displays(2D mode only) Users can pick how the C-MAP MAX-N+ 2015 chart is displayed Default = Standard C-MAP color presentation Paper Chart = Designed to look like traditional marine charts Safety Shading = Allows the user to input a safety depth to shade the chart blue in that area. The rest will display as white. Depth Shading = Preset color palette displaying a gradient from shallow (lighter color) to deep (darker color) 17 Navico Company Confidential Slide 18 C-MAP MAX-N+ 2015 18 Navico Company Confidential Default Depth Shading Safety Shading Paper Chart Slide 19 C-MAP MAX-N+ 2015 User defined Depth Shading (2D mode only) Advanced setting to allow users to customize their own charting colors Set depths ranges to display as certain colors, or gradients of colors Set the depth for the color layer Set the transparency of the color layer Example: If you want to set shallow water to show red you will set the custom range as shown below (see next page for example) For this method it is required to set one point at the same depth 100% opacity and one point at 0% opacity Users can adjust these points to make different color blends More points can be added and by adjusting the depth, color and opacity Note: There are endless combinations that can be customized with these settings, far too extensive to cover in full detail here. 19 Navico Company Confidential Slide 20 C-MAP MAX-N+ 2015 20 Navico Company Confidential Slide 21 C-MAP MAX-N+ 2015 User defined Depth Shading (2D mode only) Example 2: In this example we have set a red range up to 10ft. and a dark blue range at 30ft and greater 21 Navico Company Confidential Slide 22