Grinch Ornament Footprint - Hobby Ceramicraft
3
Products Used Bisque MB-882 Rectanggle Tray Color SC-15 Tuxedo SC-16 Cotton Tail SC-27 Sour Apple SC-74 Hot Tamale FN-001 White FN-009 Black Decorating Accessories CB-106 #6 Script Liner CB-110 #10/0 Liner CB-604 #4 Soft Fan BT-910 Synthetic Sponges AC-230 Clay Carbon Paper Additional Materials Pencil Download Project Pattern: Grinch Ornament Footprint Pattern Project Info Designer: Meghan Bulau Skill Level: Basic Time: 1½ hours Grinch Ornament Footprint Instructions 1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust. 2. Using a CB-604 #4 Soft Fan, apply 3 coats of FN-001 White to the front of the plate. Allow to dry. 3. Apply 3 coats of FN-009 Black to the back of the plate. This can be done now, or after you finish the design to speed up the drying process. 4. Using a pencil and AC-230 Clay Carbon Paper, trace the design onto the plate. 5. Using a CB-106 #6 Script Liner, apply 3 coats of SC-27 Sour Apple to the hand, SC-74 Hot Tamale on
Transcript of Grinch Ornament Footprint - Hobby Ceramicraft
Products Used
Bisque
MB-882 Rectanggle Tray
Color
SC-15 Tuxedo
SC-16 Cotton Tail
SC-27 Sour Apple
SC-74 Hot Tamale
FN-001 White
FN-009 Black
Decorating Accessories
CB-106 #6 Script LinerCB-110 #10/0 Liner
CB-604 #4 Soft Fan
BT-910 Synthetic Sponges
AC-230 Clay Carbon Paper
Additional Materials
Pencil
Download Project Pattern: GrinchOrnament Footprint Pattern
Project Info
Designer: Meghan Bulau
Skill Level: BasicTime: 1½ hours
Grinch Ornament Footprint
Instructions
1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any
dust.
2. Using a CB-604 #4 Soft Fan, apply 3 coats of FN-001 White to the front of the plate. Allow to dry.
3. Apply 3 coats of FN-009 Black to the back of the plate. This can be done now, or after you finish thedesign to speed up the drying process.
4. Using a pencil and AC-230 Clay Carbon Paper, trace the design onto the plate.
5. Using a CB-106 #6 Script Liner, apply 3 coats of SC-27 Sour Apple to the hand, SC-74 Hot Tamale on
the sleeve and ornament, SC-16 Cotton Tail on the cuff, and SC-15 Tuxedo on swirls.6. Using a CB-110 #10/0 Liner, apply 1 coat of SC-15 Tuxedo for the line work on the hand and ornament.
7. Using a BT-910 Synthetic Sponge liberally apply SC-16 Cotton Tail to the Child’s foot.
8. Immediately press foot onto the center of the ornament pulling it straight off.
9. Don’t forget to paint the back of the plate if you have not already done so.
10. Allow the plate to dry completely.11. Stilt and fire to shelf cone 05/06
