Products Used

Bisque

MB-882 Rectanggle Tray

Color

SC-15 Tuxedo

SC-16 Cotton Tail

SC-27 Sour Apple

SC-74 Hot Tamale

FN-001 White

FN-009 Black

Decorating Accessories

CB-106 #6 Script LinerCB-110 #10/0 Liner

CB-604 #4 Soft Fan

BT-910 Synthetic Sponges

AC-230 Clay Carbon Paper

Additional Materials

Pencil

Download Project Pattern: GrinchOrnament Footprint Pattern

Project Info

Designer: Meghan Bulau

Skill Level: BasicTime: 1½ hours

Grinch Ornament Footprint

Instructions

1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any

dust.

2. Using a CB-604 #4 Soft Fan, apply 3 coats of FN-001 White to the front of the plate. Allow to dry.

3. Apply 3 coats of FN-009 Black to the back of the plate. This can be done now, or after you finish thedesign to speed up the drying process.

4. Using a pencil and AC-230 Clay Carbon Paper, trace the design onto the plate.

5. Using a CB-106 #6 Script Liner, apply 3 coats of SC-27 Sour Apple to the hand, SC-74 Hot Tamale on

the sleeve and ornament, SC-16 Cotton Tail on the cuff, and SC-15 Tuxedo on swirls.6. Using a CB-110 #10/0 Liner, apply 1 coat of SC-15 Tuxedo for the line work on the hand and ornament.

7. Using a BT-910 Synthetic Sponge liberally apply SC-16 Cotton Tail to the Child’s foot.

8. Immediately press foot onto the center of the ornament pulling it straight off.

9. Don’t forget to paint the back of the plate if you have not already done so.

10. Allow the plate to dry completely.11. Stilt and fire to shelf cone 05/06