Granite Polishing and GrindingGranite, Hard Stone Cutting Chip Free - Hard Stone - Designed for...

Product Catalog

For Distribution Contact Us : [email protected]

Granite Polishing and Grinding

- Designed for Faster Polishing - Granite, Dark Color Stone

- Flexible Pads

- Extraordinary Finish, Fast Polishing

- Step 1 Wet Dry, Rest Steps Wet Application

- Excellent Polish on Dark or Light Color Granite, Quartz, Quartzite

- Available Size - 4”

- Available Steps - Step 1, 2, 3, 4

- Available as Set, or Individual Steps

Diamond Polishing Pads, 4 Step - Series Ultra G

Granite, Hard Stones - 4 StepsGr

anite

, Har

d Sto

nes -

4 St

eps


MPN Model Description UPCDPPW04ULTG01044P PPW105Z 4” 4 Step Pads Set 841674120256

WET/DRY

- Designed for Granite Polishing

- Extreme Flexible


- Wet Application

- Works Good on Dark Color Quartz, Stones as Well

MADE IN KOREA


- Available Steps - Step 1, 2, 3


Diamond Polishing Pads, 3 Step Wet - Series Ultra G

Gran

ite, D

ark Q

uartz

- 3 St

eps

Granite, Dark Quartz - 3 Steps

MPN Model Description UPCDPPW04ULTG01033P PPW101Z 4” 3 Step Pads Set 841674119571DPPW04ULTGPOS11P PPW102Z 4” Pad Step 1 841674119588

WET

3

- Designed for Granite, Quartz, Hard Stones

- For Edge, Surface and Floor Polishing

- Very Flexible Pads

- Wet Application

- Works Good on Marble as Well


- Available Grit - 30, 50, 100, 200, 400, 500, 800, 1000, 1500, 3000, Buff

- Available as Set, or Individual Grits

Diamond Polishing Pads, 7 Step Wet - Series Super G

MPN Model Description UPCDPPW04SPRG503K7P PPW112S 4” Set of 7 Pads 841674119809DPPW04SPRG050G1P PPW102S 4” Grit 50 Pad 841674119700


Gran

ite, Q

uartz

, Har

d Sto

ne

Granite, Quartz, Hard Stone

- Designed for Granite, Dark Color Quartz, Hard Stones

- For Edge, Surface and Floor Polishing

- Flexible Pads

- Wet Application

- Works Good on Marble as Well

- Available Size - 3”, 4”, 5”, 7”



Diamond Polishing Pads, Series Ultra D

MPN Model Description UPCDPPW04ULTD503K7P PPW115X 4” Set of 7 Pads 841674115382DPPW04ULTD50BB8P PPW116X 4” Set of 8 Pads 841674115399DPPW05ULTD503K7P PPW140X 5” Set of 7 Pads 841674115641DPPW07ULTD503K7P PPW166X 7” Set of 7 Pads 841674115900

Granite, Dark Quartz, Hard StoneGr

anite

, Dar

k Qua

rtz, H

ard S

tone

WET

WET

- Designed for Granite

- Great for Onsite Use, Best Result When Used with Spray of Water

- Dry Or Wet (Hybrid) Application

- Very Flexible

- Works Good on Quartz, Marble

- Available Size - 4”, 5”



Diamond Polishing Pads, 3 Step Wet Dry - Series Super G

Granite, Quartz, Marble

Diamond Polishing Pads, 7 Step Dry - Series Super A


MPN Model Description UPCDPPH04SPRG01033P PPPH101S 4” 3 Step Pads Set 841674117812DPPH05SPRG01033P PPH106S 5” 3 Step Pads Set 841674119489

Granite, Marble, Travertine

Gran

ite, M

arbl

e, Tr

aver

tine

Gran

ite, Q

uartz

, Mar

ble

WET/DRY

- Designed for Granite

- Great for Onsite Use

- Dry Application

- Very Little Flexible

- Works Good on Marble, Travertine Polishing

- Available Size - 3”, 4”, 5”



MPN Model Description UPCDPPD03SPRA503K7P PPD164K 3” Set of 7 Pads 841674101484DPPD04SPRA508H5P PPD117K 4” Set of 5 Pads 841674101019DPPD04SPRA503K7P PPD114K 4” Set of 7 Pads 841674100982DPPD05SPRA503K7P PPD140K 5” Set of 7 Pads 841674101248

DRY

5

Concrete Floor Polishing

- Designed for Quartz Polish

- Extreme Flexible White Pads


- Wet Application

- Works Good on Color Quartz, Light Color Stones

MADE IN KOREA




Diamond Polishing Pads, 3 Step Wet - Series Ultra Q


- Wet Application

- Very Flexible

- Works Good on Marble and Granite




Diamond Polishing Pads, 3 Step Wet - Series Super Q

MPN Model Description UPCDPPW04ULTQ01033P PPW101R 4” 3 Step Pads Set 841674119120DPPW04ULTQPOS11P PPW102R 4” Pad Step 1 841674119137

MPN Model Description UPCDPPW04SPRQ01033P PPW101T 4” 3 Step Pads Set 841674119250DPPW05SPRQ01033P PPW106T 5” 3 Step Pads Set 841674119526


Quartz, Marble, Granite

Quartz, Marble, Granite

Quar

tz, M

arbl

e, Gr

anite

Quar

tz, M

arbl

e, Gr

anite

WET

WET

All Purpose Pads

MPN Model Description UPCDPPW04SPRQ503K7P PPW118T 4” 7 Step Pads Set 841674121437


All P

urpo

se Pa

ds

Diamond Polishing Pads, 7 Step Wet - Series Standard J

Quartz, Marble


- Use for Quartz, Marble, Light Color Stone Wet Polish - Wet Application

- Very Flexible


- Avaialble Grits - Grit 50, 100, 200, 400, 800, 1500, 3000

- Avaialble as Set, or Individual Grits

- All Purpose Aggressive White Pads

- Semi-Flexible resin bond diamond pads with Velcro Backing.

- Available Size - 4 Inch, 5 Inch

- Available Grit - 30, 50, 100, 150, 200, 400, 500, 800, 1500, 3000, 6000, 8000

- Available as

- Set of 5 Pads, Set of 7 Pads, Set of 8 Pads

- Individual Grits

Diamond Polishing Pads, 7 StepWet - Series Super Q

Quar

tz, M

arbl

e

WET

MPN Model Description UPCDPPW04STDJ503K7P PPW170D 4” Set of 7 Pads 841674107950DPPW04STDJ506K8P PPW171D 4” Set of 8 Pads 841674107967 DPPW05STDJ503K7P PPW226D 5” Set of 7 Pads 841674108513DPPW05STDJ506K8P PPW227D 5” Set of 8 Pads 841674108520

WET

7


All Purpose PadsAl

l Pur

pose

Pads

- All Purpose Aggressive Colored Pads

- Semi-Flexible resin bond diamond pads with Velcro Backing.

- Available Size - 3 Inch, 4 Inch, 5 Inch, 6 Inch

- Available Grit - 30, 50, 100, 150, 200, 400, 500, 800, 1500, 3000, 6000, 8000

- Available as

- Set of 5 Pads, Set of 7 Pads, Set of 8 Pads

- Individual Grits

Diamond Polishing Pads, 7 Step Wet - Series Standard A

Chip

Free

- Fas

ter

Diamond Saw Blade, SeriesStandard G

MPN Model Description UPCDSBD05STDG08201P SBD103C 5” Saw Blade 841674116419DSBD06STDG08201P SBD104C 6” Saw Blade 841674116426

- Designed for Granite Cutting

- Dry Cutting

- Turbo Continuous

- Chip Free Fine Cutting

- Usage - Granite, Quartz

- Available Sizes - 4”, 4.5”, 5”, 6”

Granite Cutting

DRY

MPN Model Description UPCDPPW03STDA503K7P PPW111A 3” Set of 7 Pads 841674103433DPPW04STDA503K7P PPW194A 4” Set of 7 Pads 841674104263 DPPW05STDA503K7P PPW281A 5” Set of 7 Pads 841674105130DPPW06STDA503K7P PPW306A 6” Set of 7 Pads 841674105383

WET


Granite, Hard Stone CuttingCh

ip Fr

ee - H

ard S

tone

- Designed for Granite & Harder Stone Cutting

- Dry Cutting

- Turbo Continuous


- Usage - Granite, Hard Stones, Quartzite

- Available Sizes - 4”, 4.5”, 5”, 6””

Diamond Saw Blade, SeriesSuper G

MPN Model Description UPCDSBD05SPRG08201P SBD103S 5” Saw Blade 841674118383DSBD06SPRG08201P SBD104S 6” Saw Blade 841674118390

DRY

Chip

Free

- Qua

rtz Gr

anite

Diamond Saw Blade, SeriesStandard A

MPN Model Description UPCDSBD05STDA10201P SBD103A 5” Saw Blade 841674121499DSBD06STDA10201P SBD104A 6” Saw Blade 841674121505

- Designed for Quartz & Granite Cutting

- Dry Cutting

- Turbo Continuous 10 MM Segments


- Usage - Quartz, Granite

- Available Sizes - 4”, 4.5”, 5”, 6”

Quartz, Granite Cutting

DRY

9

Stone Flush Cutting

MPN Model Description UPCDSBD45ULTA10781P SBD102U 4.5” Saw Blade 841674120201DSBD05ULTA10781P SBD103U 5” Saw Blade 841674120218


Ston

e Flu

sh Cu

tting

- Flush Cut for Edges

- Connect to Saw Blades

Saw Blade Flush Adpater, Series Super A

MPN Model Description UPCFLAL05SPRA00581P AFB101K Flush Cut Adapter 841674119649

Quartzite, Granite, Quartz

- Designed for Quartzite & Hard Stone Cutting

- Dry Cutting

- Turbo Continuous Segments

- Super Fine Cutting

- Fast Cutting Speed

- Usage - Quartzite, Granite, Hard Stones

- Available Sizes - 4.5”, 5”, 6”

Diamond Saw Blade, SeriesUltra A

DRY

Quar

tzite

, Gra

nite

, Qua

rtz

WET/DRY


- Designed for Granite & Hard Stone Countertop Edge, Surface Grinding

- Resin Filled T-Seg Circle Continuous Cup Grinding Wheel for Effortless Smooth Grinding

- Super Fast Aggressive Grinding & Stock Removal

- Dry or Wet Grinding

- Grits - Coarse, Medium, Fine

- 5/8” 11 Threaded Arbor

- Usage - Granite, Hard Stones, Quartzite, Concrete, Marble

- Available Size - 4”, 5”, 6”, 7”


Diamond Cup Wheel SeriesUltra A Granite Hard Stone Grinding

MPN Model Description UPCDCWD04ULTARC581P CWD101U 4” Coarse Wheel 841674121529DCWD04ULTARM581P CWD102U 4” Medium Wheel 841674121536

Gran

ite Ha

rd St

one G

rindi

ngSi

zes :

4”, 5

”

- Designed for Granite Countertop Edge, Surface Grinding

- Resin Filled Turbo Continuous Cup Grinding Wheel for Effortless Smooth Grinding

- Faster Grinding & Stock Removal, Dry or Wet Grinding



- Usage - Granite, Marble



Diamond Cup Wheel Series Super A

MPN Model Description UPCDCWD04SPRARC581P CWD118K 4” Coarse Wheel 841674116242DCWD04SPRARM581P CWD119K 4” Medium Wheel 841674116259 DCWD04SPRARF581P CWD120K 4” Fine Wheel 841674116266

Stone Concrete Grinding

WET/DRY

WET/DRY

11


Granite Stone Grinding

- Designed for Granite Stone Countertop Edge, Surface Grinding

-Turbo Cup Grinding Wheel for aggressive Grinding



- Usage - Granite, Hard Stones, Concrete, Marble

- Available Size - 4”, 5”, 6”, 7”

- Available as Individual Grits

Diamond Cup Wheel SeriesSuper C

MPN Model Description UPCDCWD04SPRCTB581P CWD105N 4” Cup Wheel 841674116150DCWD05SPRCTB581P CWD106N 5” Cup Wheel 841674116167

Gran

ite St

one G

rindi

ng

- Designed for Quartzite & Hard Stone Countertop Edge, Surface Grinding

- Resin Filled T-Seg Circle Continuous Cup Grinding Wheel for Effortless Smooth Grinding

- Extremely Faster Grinding & Stock Removal




- Usage - Quartzite, Hard Stones, Granite, Concrete

MADE IN KOREA



Diamond Cup Wheel SeriesUltra G Quartzite Granite Grinding

MPN Model Description UPCDCWD04ULTGRC581P CWD101Z 4” Coarse Cup wheel 841674120324DCWD04ULTGRM581P CWD102Z 4” Medium Cup Wheel 841674120331

Quar

tzite

Gran

ite Gr

indi

ng

WET/DRY

WET/DRY


Diamond Cup Wheel SeriesStandard A

All Purpose GrindingAl

l Pur

pose

Grin

ding

MPN Model Description UPCDCWD04STDATB581P CWD101A 4” Cup Wheel 841674116020DCWD05STDATB581P CWD102A 5” Cup Wheel 841674116037

- All Purpose Granite Stone Countertop Edge, Surface Grinding

-Turbo Cup Grinding Wheel for aggressive Grinding



- Usage - Granite, Hard Stones, Concrete, Marble


- Available as Individual Grits

MPN Model Description UPC

WET/DRY

Stone Leathering BrushesDiamond Leathering Brushes

Series Super A

Ston

e Let

herin

g

- Designed for Granite Leathering

- Dual Connector Snail Lock and 5/8” 11

- Available Grit - 36, 46, 60, 80, 120, 180, 240, 320, 500

13


Dust Shroud

- 7” Dust Shroud for Grinder

- Connects to Known Brand 7” Grinders

- Vacuum Connector

- Optimal Flexible Body for Easy Handling

Dust Shroud for Grinder, Series Standard A

MPN Model Description UPCGDSR07STDA00031P DSD102A 7” Dust Shroud 841674115207

Size

: 7”

- Stadea 5 inch all metal dust shroud for improved durability

- Metal construction 1 1/4” diameter extra long vacuum connector for optimal surface dust suction efficiency

- Adjustable velcro strip for easy and quick dust shroud height adjustment

- One hand collar lock for quick lock and release

- Maximum collar size - 1 13/16”

Metal Dust Shroud, SeriesStandard A Dust Shroud

MPN Model Description UPCGDSD05STDA00021P DSD101A 5” Dust Shroud 00841674115191

Size

s : 5

”


- Designed for Hard Stone Quartzite, Granite Cutting

- Silent Core Bridge Saw Blade

- Chipfree Straignt and Miter Bevel Cuts

- 20 MM Segment

- Long Life

MADE IN KOREA


Bridge Saw Blade, Series Ultra A Quatzite, Granite

MPN Model Description UPCDBBW14ULTA20601P BBW101U 14” Bridge Saw Blade 841674120294DBBW16ULTA20601P BBW102U 16” Bridge Saw Blade 841674120300DBBW18ULTA20601P BBW103U 18” Bridge Saw Blade 841674120317

Quat

zite,

Gran

ite

WET

- Designed for Cut Hard Stone, Quartzite, Granite

- Internal and External Support

- Slot for Easy Pop the Core

MADE IN KOREA

- Available Size - 1 1/4”, 1 3/8”, 1 1/2”

Diamond Core Bit, Series Ultra A Granite Quartzite Hard Stones

MPN Model Description UPCDCBD32ULTA00581P CBD105U 32 MM (1 1/4”) Bit 841674119182DCBD35ULTA00581P CBD106U 35 MM (1 3/8”) Bit 841674120270DCBD38ULTA00581P CBD107U 38 MM (1 1/2”) Bit 841674120287

WET/DRY

Gran

ite Qu

artzi

te Ha

rd St

ones

15

- Desgined for Stone Edge Profile Using Hand Grinder Polisher

- Top Guide to Control Profile Movement

- Internal Water Hole

- Vacuum Brazed Diamond for Aggressive Cutting

- 5/8” 11 Female Threaded

- Available Sizes - 3/8” (10 MM), 9/16” (15 MM), 3/4” (20 MM), 1” (25 MM), 1 1/4” (30 MM), 1 1/2” (40 MM)

- Available Shapes - Full Bullnose, Bevel, Demi, Ogee, Pencil, Cove

Diamond Profile WheelsSeries Super A

Stone Profiling, Concrete Profiling

Demi Bevel

Full BullnoseOgee

• 05MM(B5)• 10MM(B10)• 15MM(B15)• 20MM(B20)• 25MM(B25)• 30MM(B30)• 40MM(B40)

• 05MM(E5)• 10MM(E10)• 15MM(E15)• 20MM(E20)• 25MM(E25)• 30MM(E30)• 40MM(E40)

• 20MM(V20)• 25MM(V25)• 30MM(V30)• 40MM(V40)

• 20MM(F20)• 25MM(F25)• 30MM(F30)• 40MM(F40)St

one P

rofil

ing,

Conc

rete

Profi

ling

MPN Model Description UPCDPWW10SPRA1B581P PWW102K 3/8” Demi Profile Wheel 841674100425DPWW30SPRA1F581P PWW121K 1 ¼ Ogee Profile Wheel 841674100616DPWW25SPRA1V581P PWW116K 1” Full Bullnose Profile Wheel 841674100562DPWW40SPRA1V581P PWW118K 1 1/2 “ Full Bullnose Profile Wheel 841674100586


WET/DRY

- Designed for Stone Edge Shaping Profiling on Routers

- Sintered Diamond Bit, Metal Bond

- Wet or Dry Application

- M8 or M10 Threaded

- Available Sizes - 3/8” (10 MM), 9/16” (15 MM), 3/4” (20 MM), 1” (25 MM), 1 1/4” (30 MM), 1 1/2” (40 MM)

- Available Shapes - Demi, Full Bullnose, Bevel

Diamond Router BitsSeries Super A

Stone

Demi Bevel Full Bullnose• 10MM(E10)• 15MM(E15)• 20MM(E20)• 25MM(E25)• 30MM(E30)• 40MM(E40)

• 10MM(B10)• 15MM(B15)• 20MM(B20)• 25MM(B25)• 30MM(B30)• 40MM(B40)

• 20MM(V20)• 25MM(V25)• 30MM(V30)• 40MM(V40)

Ston

e

MPN Model Description UPCDRBW40SPRA2V801P RBW129K 1 ½” Full Bullnose 841674113746DRBW30SPRA2V801P RBW127K 1 ¼” Full Bullnose 841674113722DRBW20SPRA2E801P RBW114K 3/4” Bevel 841674113593DRBW10SPRA2B801P RBW101K 3/8” Demi 841674113463

17


Snail Lock Backing PadSeries Super A

Snail Lock Adapter - Edge PolishingSn

ail L

ock A

dapt

er -

Edge

Polis

hing

Ston

e Edg

e Pol

ishin

g - In

line M

achi

nes

MPN Model Description UPCBRAL04SPRASA581P ASA101K 4” Snail Lock Pad 841674119618BRAL05SPRASA581P ASA102K 5” Snail Lock Pad 841674119625

Snail Lock Polishing PadSeries Super A Stone Edge Polishing - Inline Machines

- Designed to Polish Straight Edge Polish on Inline Machines

- Twist & Lock Quick Pad Change

- Wet or Dry Polishing, with Central Water Hole

- Rigid Aluminium Snail Lock, Rubber Backing Pad

- 5/8” 11 Female Threaded Arbor, Adequate Height for Flat Grit and Easy Release

- For inline Machines, Grinders Polishers


MPN Model Description UPCDPSW05SPRA050G1P PSW101K 5” Grit 50 Pad 841674120355DPSW05SPRA100G1P PSW102K 5” Grit 100 Pad 841674120362DPSW05SPRA200G1P PSW103K 5” Grit 200 Pad 841674120379

- Designed for Single Pass Inline Flat Edge Polishing

- Granite, Quartz, Marble Polishing

- Snail Lock Connection, Quick Change

- 10 MM Thick Resin Polishing Pads

- Wet Application


- Available Grit - 50, 100, 200, 400, 800, 1500, 3000


WET/DRY

WET


- Designed for Single Pass Inline Flat Granite Edge Polishing

- Usage - Granite, Dark Color Stones & Quartz Polishing

- Snail Lock Connection, Quick Change

- 6 MM Thick Resin Polishing Pads

- Wet Application


- Available Grit - 50, 100, 200, 400, 800, 1500, 3000


Snail Lock Polishing Pad, Series Super G Stone Edge Polishing - Inline Machines

Ston

e Edg

e Pol

ishin

g - In

line M

achi

nes



- Designed for Sink Edge Round over Stone Chip free Grinding Shaping

- Zero Tolerance Resin-Filled for Chip Free aggressive Grinding

- Internal Water Hole for Cust-Free Grinding

- Controlled Cutting and Shaping of Stones

- 5/8” 11 Female Threaded Arbor

- Available Sizes - 2”, 3”

Diamond Drum Wheel -Series Ultra A Stone Sink Edge Grinding Shaping

Ston

e Sin

k Edg

e Grin

ding

Shap

ing

WET

WET/DRY

19

- Designed for Sink Edge Roundover Stone Grinding Shaping

- Controlled Cutting and Shaping of Stones

- Vacuum Brazed Diamond, Very Aggressive

- 5/8” 11 Female Threaded Arbor

- Available Sizes - 2”, 3”

Diamond Drum WheelSeries Super A Stone Sink Edge Grinding Shaping

Ston

e Sin

k Edg

e Grin

ding

Shap

ing

MPN Model Description UPCDDWW02SPRA21581P DWW101K 2” Drum Wheel 841674100333DDWW03SPRA21581P DWW102K 3” Drum Wheel 841674100340DDWW02STDA21581P DWW101A 2” Drum Wheel 841674100319DDWW03STDA21581P DWW102A 3” Drum Wheel 841674100326

WET/DRY


Rubber Backing Pad Flexible, Series Standard A Countertop Edges

Size

s : 2”

, 3”, 4

”, 5”, 6

”

MPN Model Description UPCBRRB03STDA00581P RBP101A 3” Rubber Pads 841674113173BRRB04STDA00581P RBP102A 4”Rubber Pads 841674113180BRRB05STDA00581P RBP103A 5” Rubber Pads 841674113197BRRB06STDA00581P RBP104A 6” Rubber Pads 841674113203

- Designed for Countertop Edge Polishing

- Semi Flex Rubber Backing Pad, Brass Arbor

- Wet or Dry Polishing, with Water Hole

- Velcro Backed for Non-Slip Grip


- Maximum RPM 5000

- Available Size - 2”, 3”, 4”, 5”, 6”


- Designed for Tight Corner Edge Polishing

- Extra Flex Rubber Backing Pad, Brass Arbor




- Maximum RPM 5000


Extra Flex Rubber Backing Pad, Series Standard F Tight Corner, Edges

Ogee Bullnose

- Extreme Flex Rubber Backing Pad, Brass Arbor

- Ogee Bullnose Polishing




- Maximum RPM 5000


Rubber Backing Pad Extreme Flexible, Series Super F

Size

: 4”

Size

: 4”

MPN Model Description UPCBRRB04STDF00581P RBP101P 4” Extra Flex Pad 841674116884

MPN Model Description UPCBRRB04SPRF00581P RBP103K 4” Extreme Flexible Pad 841674116891

21


- Designed for Flat Surface, Countertop, Floor Polishing

- Rigid Bakelite Backing Pad, Brass Arbor




- Maximum RPM 5000


Bakelite Backing Pad, Series Super R

Surface Polishing

MPN Model Description UPCBRBK04STDR00581P RBK101F 4” Rigid Bakelite Pad 841674119182

Size

- 4”, 5

”

Surface, Floor PolishingRubber Backing Pad Rigid, Se-

ries Standard R

Size

- 4”, 5

”


- Rigid Rubber Backing Pad, Brass Arbor




- Maximum RPM 5000


MPN Model Description UPCBRRB04STDR00581P RBP102F 4” Rigid Pad 841674113265BRRB05STDR00581P RBP103F 5” Rigid Pad 841674113272


Surface, Floor PolishingAluminum Backing Pad, Series Super R

Size

- 3”, 4

”, 5”, 6

”, 7”


- Rigid Aluminum Backing Pad, Brass Arbor



- Floor or Counter Polishing


- Maximum RPM 5000

- Available Size - 3”, 4”, 5”, 6”, 7”

MPN Model Description UPCBRAL03SPRR00581P ABP101Q 3” Aluminum Pad 841674118871BRAL04SPRR00581P ABP102Q 4” Aluminum Pad 841674118888 BRAL05SPRR00581P ABP103Q 5” Aluminum Pad 841674118895BRAL06SPRR00581P ABP104Q 6" Aluminum Pad 841674118901BRAL07SPRR00581P ABP105Q 7" Aluminum Pad 841674118918

Stone Sink Edge Polishing

- Designed for Oval, Round Surface and Corner Polishing

- Rigid Convex Rubber Backing for Stadea Convex Pads

- Sink Edge Polishing

- Brass Arbor



- Maximum RPM 5000

Backing Pad, Convex, SeriesStandard A

Size

s : 4”

MPN Model Description UPCBRCV04STDA00581P RCP101A 4” Rubber Pad 841674115153

23


Stone Sink Edge Polishing Pad

- Designed for Oval, Round Surface and Corner

- For Stone Wet or Dry Polishiing

- Convex Pads

- Fast Polishing

- Exellent Polish on Dark or Light Color Granite, Quartz, Quartzite


- Available Grits - 50, 100, 200, 400, 800, 1500, 3000


Diamond Convex Polishing Pad, Series Standard A

WET/DRY

Ston

e Sin

k Edg

e Pol

ishin

g

MPN Model Description UPCDCPW04STDA503K7P PCW112A 4” Set of 7 Pads 841674115122DCPW04STDA050G1P PCW101A 4” Grit 50 Pad 841674115016DCPW04STDA100G1P PCW102A 4” Grit 100 Pad 841674115023

- Designed for Oval, Round Surface and Corner Polishing

- Rigid Convex Rubber Backing for Stadea Convex Pads

- Sink Edge Polishing

- Brass Arbor with Water Hole



- Maximum RPM 5000

Backing Pad, Convex Series Super A


Size

4”

MPN Model Description UPCBRCV04SPRA00581P RCP101K 4” Convex Backing Pad 841674121390

MPN Model Description UPCDHPW00SPRA503K5P HPW178K Set of 5 Hand Pads 841674100074DHPW00SPRA503K7P HPW179K Set of 7 Hand Pads 841674100081DHPW00SPRA050G1P HPW101K Grit 50 Hand Pad 841674100005

WET/DRY


Stone Sink Edge Polishing PadDiamond Convex Polishing

Pad, Series Super ASt

one S

ink E

dge P

olish

ing - Designed for Oval, Round Surface and Corner

- For Stone Wet or Dry Polishiing

- Convex Pads

- Fast Polishing

- Exellent Polish on Dark or Light Color Granite, Quartz, Quartzite


- Available Grits - 50, 100, 200, 400, 800, 1500, 3000


MPN Model Description UPCDCPW04SPRA503K7P PCW109K 4” Convex Polishing Pads 841674121369


- Designed to Hand Polish Corners, Hard to Reach Areas

- Electroplated Diamond for Quick Polishing of Stone

- Flexible Plush Foam Holder, Squzees Wet Slurry

- Slotted Non-Slip Hand Grip

- Available Grits - 50, 100, 150, 200, 400, 500


Diamond Hand Polishing PadSeries Super A

Ston

e Han

d Pol

ishin

g

WET

25


- Flexible Hand Pads Designed for Polish Hard to Reach Areas

- Flexible 3 MM Thick Durable Hand Pads

- Slotted Rubber Backer for Non-Slip Hand Grip

- Available Grits - 50, 100, 200, 400, 800, 1500, 3000


Diamond Hand Polishing PadSeries Standard C Stone Hand Polishing

MPN Model Description UPCDHPWFLSTDC5C3K71 HPW110H Flexible Hand Pad Set 841674121161

Ston

e Han

d Pol

ishin

g

Stone Edge Grinding ShapingCNC Finger Bit, Series Super A

Ston

e Edg

e Grin

ding

Shap

ing

- Designed for Granite Quartz Grinding and Shaping

- Aggressive and Durable

- 1/2” Gas Connection


WET

CNC Diamond Router Bits- 7 Step Set Series Super A

Stone Edge Profiling and PolishingSt

one E

dge P

rofil

ing a

nd Po

lishi

ng

- Designed for Granite, Quartz, Quartzite Shaping and Polishing

- 7 Step CNC Router Bit to Shape and High Gloss Finish Counter Edges

- Aggressive and Durable

- Available in Various Shapes and Sizes

T30 - R3

T40 - R3

T30 - R6

T40 - R6


- Metal - Grit 50, 100, 200

- Resin - Grit 400, 800, 1500, 3000

- Metal - Grit 50, 100, 200

- Resin - Grit 400, 800, 1500, 3000

- Metal - Grit 50, 100, 200

- Resin - Grit 400, 800, 1500, 3000

- Metal - Grit 50, 100, 200

- Resin - Grit 400, 800, 1500, 3000


These features ease polishing process and enhance the polishing performance.

Improved grip-size out-of-core ergonomic back handle design minimizes back hand fatigue during usage. New comfortable back hand grip design differs from classic oversize main body hand-grip across air vents. It eliminates air-vent hand blockage improving

ElectricalSafety

GFCI - Cuts off electricity in case of hazardous electrical shock/ground beyond a threshold

Double Insulation – For enhanced electrical safety

EaseOfUse

Under Water Feed – Minimizes polishing interference Water Pressure Control & Water Stopper right from the polisher

In-built water connector to quick connect with standard water hose

Three-hole water sprayer for even distribution required for polishing, grinding, coring, profiling process, unclogs cut particles

Water Splash Guard - Splash guard to stop water spill on polisher and user, Vacuum connector minimizes dust during dry polishing

Arbor Lock Button - For tool free release of backing pads, profile wheels, core bits, grinding wheels from the polisher arbor

Power Lock Switch - One push lock for effortless continuous run

Variable Speed Dial – Adjusts speed to an specific application for specific stone, and wet or dry polishing process

Ergonomic designed handle – For comfortable grip and best polishing performance

Dual Front Handle – Top D-Handle for stone fabrication, Side handle for general purpose work

Ambidextrous Side Handle – Side handle for left or right handed use

Long Power Cord, Long Water Line – For easy access to all part of countertops

Supports up to 5” Pads – Compatible for smaller 3”, 4” and up to 5” tools

Soft Start – For comfortable feel & 5/8” 11 Arbor

Stone Wet PolisherSeries Super A Concrete Wet Polisher

SWPW05SPRA00581P SWP101K 5” Wet StonePolisher 841674114019

Ston

e Con

cret

e Wet

Polis

hing

, Cor

ing,

Profi

ling

Model DescriptionMPN UPC

The Stadea SWP101K, 5 Inch DTM+ Wet Stone Polisher for concrete countertop stone fabrication designed for ease of use, power, control and durability. DesignedForExcellence

Features robust DTM+ motor gear system to ensure the optimal speed and power needed for stone wet or dry polishing, fabrication and wide range of use cases from stone concrete profiling, grinding, coring to general purpose usage.

Head Heavy Polisher Design and out-of-core back-handle design minimizes back hand work fatigue and increase pressure on polishing surface of granite concrete etc.


For Distrubution Contact Us : [email protected]


Granite Polishing and GrindingGranite, Hard Stone Cutting Chip Free - Hard Stone - Designed for...

Documents

Transcript of Granite Polishing and GrindingGranite, Hard Stone Cutting Chip Free - Hard Stone - Designed for...