GANESH CYCLONE - 32 GTS

www.ganeshmachinery.com

GANESH CYCLONE - 32 GTS

TWIN-SPINDLE 6-AXIS

PRODUCTION TURNING CENTER 1-3/8” Bar, 5”Chucking Capacity, 6,000 RPM, 10-HP

Simultaneously Machine on the Main and Sub Spindle “C”-Axis on both spindles for Live Tool Applications Dual Gang-Tooled Slides for Fast Production Fastest Chip-To-Chip Time in This Machine Class Rigid Tapping on both spindles Integral Lathe Motor Spindles Parts Conveyor Parts Catcher Chip Conveyor

Ganesh Machinery, Inc. - 20869 Plummer St. Chatsworth, CA 91311 - Issued 1/30/14

Phone 818-349-9166 I Toll Free 888-542-6374 (US only) I FAX 818-349-7286 I www.ganeshmachinery.com

2

6 - AXIS GANESH CYCLONE-32 GTS PRECISION CNC DUAL SPINDLE TURNING CENTER

The GANESH CYCLONE-32 GTS is a 6-axis 1.25” (32mm) bar diameter twin spindle CNC production turning center with a fully synchronized C-axis on both the main and subspindle. The CYCLONE-32 GTS configuration produces shorter cycle-times because the Counter Spindle works simultaneously with the Main Spindle. The Cyclone-32 GTS has integral built-in spindles on the main and the sub allowing extremely fast acceleration and deceleration times. The beltless headstock design provides superior surface finish. Traub A-32 “Dead-Length” collets are utilized in both the main and subspindle to ensure accurate part transfer between the spindles. The GANESH CYCLONE-32 GTS lathe features dual gang slides sitting side-by-side that allow flexibility in tool placement, including driven tools. Both the main gang slide and the subspindle gang slide work completely independently, allowing for shorter cycle times because the front and the back of a workpiece can be machined at the same time. Dual programmable ¾ HP coolant systems with double coolant filtration bring coolant to the cutter interface. The subspindle features a finished parts ejector and programmable air blast to clean the collet. The included parts catcher and parts conveyor transfers the finished workpiece outside of the work envelope. A steel link-belt chip conveyor is included with the machine to dispose of the chips. A wheeled chip cart is also provided.

C1 C2



3

GANESH CYCLONE-32 GTS Design Specifications

Machine Bed The one-piece closed box machine bed and base casting is made of a high-density Meehanite processed cast iron structure that is heavily ribbed to increase lateral stiffness and maximize stress absorption during the turning process. The torque-tube casting ensures that no twisting occurs in the bed during heavy cutting or as a result of thermal migration. The low center of gravity cast bed weighs nearly 5,500 pounds and the design gives superb vibration control, which provides for superior surface finish and increased tool life. The assembled machine weighs over 7,260 pounds making it the heaviest machine in its class.

Machine Ways All four linear axis; X, Z, X2 & Z2 utilize heavy-duty linear ways to ensure sustained high accuracy machining results. The fast rapid traverse rates reduce non-cutting time and the low stick/slip characteristics of the liner way design ensure superior complex workpiece shape definition because the axes precisely follow the control contour commands. Each integral spindle has a fully synchronized C - axis for axial and radial milling features.

Ball screws & Bearings Premium quality double-nut ballscrews and guideways are utilized to ensure high accuracy and long service life. The ballscrew nuts are preloaded and forced lubricated, and then are laser aligned during machine assembly. The ballscrew rotational torque is checked over the entire travel length to ensure there is no binding, to minimize wear and thermal migration that would affect machine accuracy.

Integral Machine Spindles The integral machine spindles are supported in two matched-sets of high quality Class-7 (P4) bearings, which are lubricated for life. The spindles are dynamically balanced to eliminate vibration for better surface finish and workpiece accuracy. The integral spindle design provides very fast acceleration and deceleration to reduce workpiece cycle time. The spindles are put through a 72-hour test run prior to assembly that records any thermal gradients or spindle vibration. This process ensures many years of trouble-free production use. A spindle chiller is incorporated into the machine design to maintain the spindle temperature for consistent part accuracy. There is a hydraulic cylinder on both spindles for drawtube activation. The drawtube position is monitored by a stroke control sensor for operational safety. The subspindle parts ejector pushes the part into the waiting parts catcher.

Rigid Tapping on both spindles The main spindle and sub spindle have rigid tapping standard allowing the tooling flexibility needed to setup complicated jobs easily without the need for special tap holders.

Automatic Lubrication System The automatic lubrication system operates on a timed interval and monitors low oil level, and will stop the machine at the end of the current cycle if a fault condition occurs. The lube system is housed in a recess in the casting to ensure that it cannot be damaged by any passing shear hazard. A meter valve regulates oil flow, which is pumped at timed intervals through nylon tubes to distributor orifices on the linear guideway trucks and the axis ballscrews.

Full High-Performance “C” Axis on Main and Sub Spindle Full “C” Axis on Main and Sub Spindle allows air or electric live tools to be added to the machine so cross and end working milling and drilling features can be machined so finished parts can be completed in one operation.

Dual Coolant Systems The independently programmable coolant pumps sit in a 52-gallon coolant tank separate from the machine for easy clean out. Both standard ¾-horsepower coolant pumps feature a coolant pressure monitor confirmation sensor to ensure the coolant is flowing for unattended machining. There are 3-coolant nozzles in the work area to provide coolant where it is needed. There is an optional 1000-psi 4-port coolant system available for those applications where high-pressure coolant would be beneficial. The subspindle has M-code controlled coolant and air blast to clean the collet seat.



4

MACHINE SPECIFICATIONS: CYCLONE-32 GTS

Main & Subspindle

Spindle Motors: 10 HP (7.5 kW) (spindle motor chiller included) Maximum RPM: 6,000 RPM Spindle Bearing: 5-bearing spindle, 3-front ball bearings, 2-rear Spindle Nose: A2-4 Collet Nose: Brown & Sharpe #22 & Traub A-32 (5C, 16C available) Drawtube ID 1.456” (37mm) Traub TRB-A32 Collet Capacity 1.25” (32mm) (1-3/8” adapter available) Spindle Center Height to Table: 3.464” (88mm) Spindle Center Height to Floor: 42.2” (1070mm)

Machine Axis

Axis Drives & Motors Mitsubishi Mel-Pro Motors and Drives X-axis Travel: Twin cross-slides 13” (330mm) on both gang slides Z-axis Travel: Twin opposed spindles 10.63” (270mm) (on both main and subspindle) Axis Servo Motor Power: X-axis 2.0 HP (1.5 kW), Z-axis 1.5 HP (1.0 kW) Rapid Travel Speed – X & Z: 1,181 IPM (30m/ minute) Minimum input unit: 40 millionths (0.00004”)

Tooling

OD Turning Tool Size: 3/4” standard (5/8”, 20mm available)

ID Turning Tool Size: 20mm (¾” available) Cross-Slide T-Slot dimensions: 5-T-Slots on 32mm centers. (10mm slot, 18mm base)

Fluid Systems

Coolant Tank Capacity: 52 Gallons (210L) with coolant flow monitor Coolant Pump: Dual ¾-HP, 45-PSI pumps (for main and subspindle) Hydraulic System: (550psi) 10-gallons (45 liters) ISO VG32 (Mobil DTE-24) Spindle Oil Cooler System 5.5-gallons (25 liters) ISO 10 (Mobil Velocite No. 6) Way Lubrication distribution (ISO-30) .5-gallons (2-liters) distributed at 3-6 cc / 15-minute cycle

Machine Dimensions

Floor Space Dimensions (LxDxH) 108” x 52” x 77” (2,980 x 1,356 x 1,760mm) Shipping Dimensions (LxDxH) 111” x 65” x 82” Net Weight: 7,260 lbs (3,300 kgs)

Machine Requirements

Power Requirements 208-220vac ±5%, 3-phase, 60-Hz Air Requirements 80-psi, 2-cfm (parts catcher, parts ejector, air blast)

The Cyclone 32-GTS is manufactured in our Certified ISO 9002 Production Facility in TAIWAN.

See the Cyclone 32-GTS in action on the Ganesh Machinery website at: http://www.ganeshmachinery.com/site/Products/Multi-Axis-Bar-Machines/32-GTS.aspx



5

GANESH CYCLONE-32 GTS PRICING

GANESH CYCLONE-32 GTS Twin Spindle 1.25” (32mm) CNC Lathe

SPECIAL VALUE PACKAGE PRICE: $109,990.00

Standard accessories included with each 32-GTS machine listed below: Synchronized C – axis on main & sub spindle.

Traub A-32 1-¼” “Dead-Length” Collet Systems for both main and subspindle

Finished parts ejector, Finished parts catcher for 3” parts, and Finished parts conveyor

Steel-Belt style chip conveyor and chip cart

Sub spindle programmable air blast and separate coolant blast to rinse collet seat

Dual ¾-HP Coolant Systems, with coolant pressure monitors and double coolant filtration

Spindle chiller for both spindles for consistent workpiece accuracy

Stroke-control monitoring of both the main-spindle and sub-spindle drawtube position

Automatic barfeed interface, Tool Box & Tool Kit

Machine condition display lamp – Tricolor

Worklamp and separate spot lamp

Tool holders to mount 17 cutting tools (3/4” O.D. holders have adjustable center height)

GANESH CYCLONE-32 GTS 6-Axis CNC LATHE PACKAGES Production Package with Short Loader, 2 Spindle Liners, Coolant Collector

With MTA or Ganesh Automatic Barloader Installed at your facility.

PRODUCTION PACKAGE PRICE: $124,990.00

High Production Package with 12’ Barloader

HIGH-PRODUCTION PACKAGE PRICE: $139,990.00 With EDGE Patriot-338 12’ Automatic Barloader Installed at your facility.

PROVIDING PROFITABLE SOLUTIONS, NOT JUST MACHINES

Touch screen control with 36 part program storage

Swiss synchronization kit with telescopic nose Dual anti-vibration device – rollers and bushings

Remnant retraction Air knife with flow control Includes: Channel set, pusher, rotating tip,

(1) Collet and (1) bushing block



6

CYCLONE-32 GTS Machine Options: 42mm (1-5/8”) extended spindle capacity upgrade available (See Cyclone-42 GTS) Extra M-Codes (Total of 8-sets of I/O) $1,495.00 Tool Breakage Detection - sweep-arm style switch w/M-code interface. One per cross slide $2,495.00 Voltage Stabilizers, 30 KVA – for areas with unstable power sources $2,995.00

Transformers – available as needed P.O.R.

FIRE PROTECTION by FIRETRACE $7,495.00

Please see fire waiver in Ganesh terms and conditions

Coolant Options:

MP-Systems 4-Port 1,000-PSI High Pressure Cutting Oil System - Installed $9,995.00 MISTBUSTER-500 Oil Filtration Unit $2,495.00 MISTBUSTER-850 Oil Filtration Unit (recommended when high-pressure used) $2,995.00 Installation of Mistbuster Coolant Filtration Unit $350.00 Oil Chiller System (18,000 BTU’s) use when high machining accuracy is required $5,995.00 Installation of Oil Chiller System with connectors and plumbing $495.00 55-Gallon Drum of Blaser VascoMill Hi-Temp vegetable based Alloy Cutting Oil $1,395.00 55-Gallon Drum of Blaser BlasoMill Hi-Temp mineral based G-P Cutting Oil $995.00 Workholding Options: Dead-Length workholding required on both spindles to ensure linear accuracy!

Traub A-32 round collets - standard nose $99.00 Traub A-32 blank machinable – standard nose Emergency Collet $99.00 Traub A-32 round collets - extended nose $119.00 Traub A-32 10-piece collet set (per your specifications) $999.00 Traub A-32 19-piece collet set (per your specifications) $1,899.00 Traub A-32 Square, Hex and Extruded Shape Collets P.O.R. 36mm 1-3/8” extended capacity collet chuck (for straight barstock only) $495.00 16-C “Dead-Length” collet chuck (limited to 1-3/8” barstock capacity) P.O.R. 5C “Dead-Length” collet chuck P.O.R. 5” Hydraulic chuck (each spindle) $1,495.00

Soft jaws for above 5” hydraulic chuck (1.5mm x 60 serrations) (set of 3 jaws) $85.00

CUSTOMIZED TOOL PLATES FOR HARDINGE, SNK, OMNITURN TOOLING AVAILABLE

UNMANNED PARTS UNLOADING P.O.R.

Royal Rota-Rack - Rotary Parts Accumulator

(Recommended for Unmanned Operation to avoid damaging parts)



7

Tooling options:

ISCAR- ¾” Start-Up Tooling Package with 7-Side-Mount OD Toolholders $2,695.00 1- ea. 80-degree, 55-degree, 35-degree turning holder with 10-inserts each, 1-L/H, 1- R/H cutoff holder with 5-inserts each. Two universal holders with

5-inserts each: for .001 radius, .032 snap-ring groove, back turning & threading.

ER-20 Collet chuck (for static ID stations) $195.00 ER-20 Inch/Metric Collet set 12-piece set of ER-20 collets 3/64” – ½” (2-13mm) capacity $335.00 Collet chucks for: ER16, ER25, ER32, ER40, TG75, TG100 collets P.O.R.

Bushing set – 5-piece solid bushings – inch, for fixed ID tool stations $395.00 20mm OD - ¼”, 5/16”, 3/8”, ½”, 5/8” ID Bushing set – 4-piece solid bushings - metric, for fixed ID tool stations $355.00 20mm OD - 8, 10, 12, 16 mm ID

Note: Special inch and metric bushings and collet sizes are available upon request.

TOOL HOLDERS FOR 17-TOOLS INCLUDED WITH MACHINE!

Toolholders: cutoff, 4-single ID, 2-double ID, 2-CW OD, 2-CCW OD, 2-double OD

¾” OD toolholders supplied with machine (5/8” holders available), 20mm ID tool bores

Make use of the High-Performance “C”-Axis spindles with the use of driven tools.

NSK & IBAG High-Speed Pneumatic and Electric Driven Tools P.O.R. There is an extensive offering of power and speed ranges available, With straight or angular mounting, to meet your specific requirement. Please call our applications department so we can provide the best solution.

8-Tool “Quick-Set-Up” Toolholder Block $1,695.00

6 - 20mm bores on 35mm centers & a Cutoff holder and a OD toolholder

Position to the locator pin and the job is ready to rerun!

LONG PART EJECTION SYSTEM

For ejecting long parts out of the back of the machine through the subspindle.

Includes Linear Backstop, Tray and

Spindle Liner for the Subspindle

$3,995.00



8

Extra GTS-32 Tool Holders (Turning Holders are 3/4”)

¾” Single OD Holder $199 ¾” Single OD Holder $199

¾” Double OD Holder $249.00 ¾” Double OD Holder $249.00

Single ID Holder (20mm) $199.00 Double ID Holder (20mm) $249.00

ID tool holders are line-bored. OPTIONAL 5/8" and 1/2" TURNING HOLDERS and ¾” ID HOLDERS AVAILABLE.

8-POSITION “Quick-Change” TOOL BLOCK: $1,695.00 6 - 20mm bores on 35mm centers with a side-mount Cutoff holder and OD toolholder.



9

BARFEEDERS FOR CYCLONE-32 GTS:

Spindle Liners – Full length steel construction $595.00 each Spindle Liners – Full length plastic construction $345.00 each

Customized Automation Systems Available

USE THE UNIQUE TRAVELING HEADSTOCK PART LOADING POSSIBILITES TO YOUR ADVANTAGE! CUSTOMIZED LOADING DEVICES AND VIBRATOR FEEDERS ARE AVAILABLE.

SEND US YOUR BLUEPRINT AND SAMPLE PARTS TO GET A FULL QUOTATION.

Machine brochures and promotional materials may show Ganesh machines

with options not included as standard equipment with the basic machine.

Machine sales are subject to the Ganesh Machinery terms and conditions of sale.

SPECIFICATIONS AND PRICING ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE!

12’ Hydraulic Bar Feeder & Bar Loaders

LNS Super HydroBar 1/4” to 1.25” - Feeds 12’ Single bar feeder unit $23,495.00 LNS Express 332 1/8” to 1.25” Automatic Bar loader 6’ or 12’ $34,995.00 EDGE Patriot-338 12’ Automatic BarLoader, 20-38mm bars (loads 12-1” bars) $29,500.00

Extra Channel Set for smaller barstock eg. 3-18mm bars $3,250.00 Bar feeder Installation $3,100.00

Edge Patriot-338 Barloader includes: 1 set of guide channels, Remnant Retract, Spindle Liner, Synch Devise, Telescope Nose, Nose Liner, Bar Pusher, 1 Rotating Tip and 1 bar stock Collet

3’ SHORT MAGAZINE BARLOADERS (Limited to the 3’ length of the spindle)

MTA Quick-Load Servo $13,990.00 GANESH AutoBar Servo-80 w/subspindle mode, loads 24-1” bars $15,990.00 EDGE Rebel-V65 Servo BarLoader (w/ subspindle mode (loads 26-1” bars) $16,200.00 Coolant Adapter (Needed with short bar loaders) $199.00 Barfeeder Installation $2,600.00

Note: Spindle liners are required for each nominal bar size

Have a specific part in mind?

Need a time study?

Fax a print to Our applications

department at (818) 349-7286



10

FEATURES:

Remote control pendant provides convenience in setting feed force, speed, and stock feed-out values. Servo driven linear feed drive positions the bar stock without the need for a bar stop. LED lights display “bar length”, “bar change”, “feeding error”, “lathe error” & permits remote monitoring. Quick and easy V-channel loading adjustment saves setup time and effort.

Single point material magazine adjustment for fast bar diameter changeover.

SPECIFICATIONS:

Bar Loader Dimensions: Physical measurements, Length: 79”, Width 41” , Center Height: 35 – 51” Bar Length Capacity: Up to 48” (1.2m) Note: Barstock must be contained within the lathe spindle! Bar Diameter Capacity: 3/8” - 3.149” (80mm). Spindle liners must be used to limit barstock whip!

Actual barstock length & diameter dependent upon the specific lathe spindle length dimensions! Bar Loader Rack Capacity: 24” = 24x 1” bars, 12 x 2” bars, etc., (610mm = 7 x 80mm bars) Automatic Bar Change Time: approximately 20-seconds to load a new bar into the guide channel Bar Loader Weight: 794 lbs. (360kgs) X-Axis Bar Loader Movable Rail Track Travel (for rear machine access): 13.2” (335mm) Motion System: Servo Motor gear-driven linear feed system loads lathe spindle via a toothed belt. Positioning Accuracy: First Infeed = ±0.020”, Feeding = ±0.004” in cycle Rapid Return Rate: 1300mm/sec. Pusher Sizes Included: 5/16”, 1/2”, 7/8” (8mm, 13mm, 22mm) Power Requirements: 1 x 220vac, 60hz / Taps for 380/400/415/440vac provided

Servo Driven Feed-Out Accurate Positioning

Fast Setup Time Quiet Operation

GANESH Auto Bar Servo-80 Automatic BarLoader S

Up to 48” Stock Length Up to 3-1/8” Bar Diameter

Rack Space for 24 x Ø1” Bars



11

Ganesh Super 900T Advanced Multi-Tasking CNC Control

PC-based control with 256 MB memory, 96-tool offset pairs, and a 15” LCD color monitor Program check-out feature using MPG handwheel to advance and retract axis moves at

the speed that the handwheel is turned to maintain a high level of process control Toolpath shown in a multiple color overlay displaying each tool Tool-Life Management Over 20-standard canned cycles for efficient program development Advanced drilling and tapping servo synchronization for shorter cycle times Cylindrical Interpolation transforms the cutting path from a plane to a cylinder for

engraving etc. Polar coordinate interpolation to synchronize linear axis motion to rotary workpiece motion Ladder diagram for extensive machine condition evaluation and diagnosis Parameter setting pages by group layout with complete description in clear text NC file name storage with complete record of start time, total time and output quantity.



12

GTS-32 Machine Layout Drawing

Machine Dimensions: Length 118”, Width 54”, Height 69”



13

Training & Terms of Sale

Training – Ganesh Machinery offers a 3-day training program for all production CNC machines at our training center. The intense training program includes basic manual programming, machine setup, operation, and operator level maintenance for those with a working knowledge in the programming & setup of CNC machines. Training does not cover CAD/CAM systems or Manual Guide-i type of programming. There is no charge for the training program at Ganesh for our customers. Turn-key projects are an available option charged at the prevailing hourly rate.

Travel Package for Training at Ganesh – Ganesh offers a subsidized travel package for those flying to LAX or Burbank for training at Ganesh in Chatsworth that includes air fare, 3-nights hotel shuttle to and from Ganesh, and lunch for the 3-days of training at $1,495.00.

On-Site Training – Training is offered at the customer site at the rate of $975 per day plus expenses.

Warranty – 3-year Mitsubishi control & drive warranty. 2-year Fanuc control & drive warranty. 1 full year Ganesh parts and labor warranty on the machine.

Service – Ganesh or your authorized Ganesh trained servicing dealer provides installation, service, and training included in the price of the machine. Spare parts are stocked at Ganesh in Chatsworth to support your continued machine operation.

F.O.B. Point – Machines ship F.O.B. Ganesh Machinery from Chatsworth, CA 91311.

Payment Terms – 20% down payment with your Purchase Order secures the machine. 70% is due prior to machine shipment, and the 10% balance is due net-30 days after installation. Or the machine can be financed with a Ganesh approved lender. Leases with $1.00 buyout are available upon approved credit.

Delivery Schedule – Delivery is stock to 8-weeks, subject to prior sales.

Purchase is governed by the Ganesh Machinery terms and conditions of sale.

UL & TÜV ELECTRICAL APPROVAL IS AN AVAILABLE OPTION

Prices and specifications subject to change without prior notice.

A large compliment of spare parts are in stock at Ganesh to ensure your continued operation.

Machine operation and service manuals are provided with each machine in electronic format on a USB memory stick. Printed manuals are also available for your use for a $150 printing fee.

SERVING INDUSTRY SINCE 1985

4000 SQ. FT. DEMO READY SHOWROOM IN-HOUSE TRAINING CENTER SPARE PARTS STOCK



14

TERMS & CONDITIONS OF SALE

General Offer & Applicable Law Products and services furnished by us are sold only on the terms and conditions stated herein. Notwithstanding any terms or conditions on Customer's orders, our performance of any contract is expressly made conditional on Customer's agreement to these terms and conditions of sale. All contracts for the sale of products shall be construed under and governed by the laws of the State of California. All orders shall be subject to our acceptance.

Prices & Specifications All published prices and specifications are subject to change without notice. Unless otherwise specified in writing, all quotations are firm and expire thirty days after date thereof. Unless otherwise stated, all prices, published or quoted, shall be exclusive of insurance and any and all taxes and transportation.

Transportation & Acceptance We reserve the right to select the means of transportation and routing when Customer's instructions are deemed unsuitable. Risk of loss and/or damage shall pass to Customer upon delivery of the products to the transportation company at the F.O.B. point. Title shall pass to the Customer when products are delivered to the transportation company at the F.O.B. point. All products must be inspected upon receipt and claims should be filed with the transportation company when there is evidence of shipping damage, even if the damage is concealed. The furnishing of a product to the Customer shall constitute acceptance of that product by the Customer unless notice of defect or nonconformity is received by us within ten-days of receipt of the product at Customer's designated receiving address. We may repair or, at our option, replace defective or nonconforming parts after receipt of notice of defect or nonconformity.

Performance We shall not be liable in any way because of any delay in performance hereunder due to unforeseen circumstance or to causes beyond our control such as, but not limited to, strike, lockout, riot, war, fire, act of God, accident, and subcontractor or supplier delays. We reserve the right to substitute suitable products, when in our opinion such substitution is necessary due to such circumstance or causes. No order may be terminated by Customer except by mutual agreement in writing. Machines are not designed to conform to UL or OSHA Standards. It is the customer’s responsibility to verify the electrical standards in their locality.

Warranty & Liability for Machine Sales Our machines, including accessories and spare parts purchased and/or included with the machine sale, are guaranteed to be free from defects in workmanship for twelve months after date of purchase, unless specified otherwise. This warranty is effective only if the necessary information is provided: serial number of machine and nature of defect, and any part claimed defective is returned prepaid to us. No such return will be accepted unless we issue a returned material authorization (RMA) number. Upon its proper return to us, we shall repair or replace, at our option, the defective part. This warranty applies only if the products have been operated in accordance with normal procedure, and if no unauthorized repairs have been attempted. This warranty is expressly in lieu of and excludes all other express or implied warranties including, but not limited to, warranties of merchantability and fitness for particular purpose, use or application and all other obligations or liabilities on our part. The remedy of repair or replacement, as provided herein, shall be the buyer's exclusive remedy and will satisfy all our liabilities whether based upon contract, negligence, or otherwise. In no event shall we be liable for incidental, consequential or special damages, or losses. Liability to third parties for bodily injury including death relating to our performance or products delivered hereunder shall be determined in accordance with applicable law and shall not exceed the payment, if any, received by us for the product or service furnished.

Warranty & Liability for Accessory & Spare Part Sales Accessories and spare parts purchased after a machine sale and/or out of the machine warranty period are guaranteed to be free from defects in workmanship for 90-days after date of purchase, unless specified otherwise. This warranty is effective only if the necessary information is provided; original date of purchase and nature of defect, and any part claimed defective is returned prepaid to us. No such return will be accepted unless we issue a returned material authorization (RMA) number. Upon its proper return to us, we shall repair or replace, at our option, the defective part. This warranty applies only if the products have been operated in accordance with normal procedure, and if no unauthorized repairs have been attempted. This warranty is expressly in lieu of and excludes all other express or implied warranties including, but not limited to, warranties of merchantability and fitness for particular purpose, use or application and all other obligations or liabilities on our part. The remedy of repair or replacement, as provided herein, shall be the buyer's exclusive remedy and will satisfy all our liabilities whether based upon contract, negligence, or otherwise. In no event shall we be liable for incidental, consequential or special damages. Liability to third parties for bodily injury including death relating to our performance or products delivered hereunder shall be determined in accordance with applicable law and shall not exceed the payment, if any, received by us for the product or service furnished.

Indemnity and Hold Harmless Customer agrees to indemnify and hold Seller harmless for any and all claims, demands or liability, whether or not Seller has yet to become liable thereon, for any potential, threatened or actual liability, costs, expenses, or loss of use arising out of or relating to the sale or use of the equipment which is subject of this sale, including but not limited to unattended use of the equipment.

Terms of Payment All payments for products released and shipped on approved credit accounts shall be due in full thirty days from date of invoice. Past Due balances shall be subject to a service charge of 1-1/2% per month. Partial shipments will be billed as made and payments therefore are subject to the above terms. We may cancel or delay delivery of products or services in the event Customer fails to make prompt payment therefore or in the event of arrearage in Customer's account. The Seller maintains all rights of secured party by reference to applicable Uniform Commercial Code provisions in effect in each state in which Equipment is located.

Disputes All disputes under any contract concerning products not otherwise resolved between Customer and Seller shall be resolved in a court of competent jurisdiction in Los Angeles, California.

Attorney’s Fees Should any legal action or arbitration be brought for the enforcement of this Agreement or any terms hereof, or due to any alleged dispute, breach, default or misrepresentation in connection with any provisions herein contained, the prevailing party shall be entitled to its reasonable attorneys’ fees, expert witness fees and other costs and expenses, as well as recoverable court costs, incurred in any such action or proceeding and any action to enforce a judgment (including bankruptcy representation) and any appeal, in addition to such other relief, as may be granted by the court..

Fire Waiver Customer shall be solely responsible to the appropriate use of the machine, especially when machining of certain metals that use oil as the cutting and cooling medium which can provoke the ignition of oil mists, fillings, chips or parts of the machine which could cause considerable damage to the machine and its surroundings. The customer assumes this risk and is hereby required to use all due diligence to avoid such incidents and to limit any potential risk exposure to life and property. The Purchaser shall hold the Seller harmless in the event of fire or other calamites resulting from the Purchasers use of the machine.

GANESH CYCLONE - 32 GTS

Documents

Transcript of GANESH CYCLONE - 32 GTS