specification sheet

fv54st

400HP •24000kg gVm •40000 GCM •6.38m wb •air suspension

long wheelbase

6x4 FV54

engine brake

driver’s air baghill start system

automated transmission

limited slip diff option

MODEL: FV54ST3VFAA 6x4 lwb

WHEEL BASE6380mm SPECIFICATIONS

ENGINEMitsubishi FUSO OM457-T3 Diesel (ADR 80/03)Configuration: 6 Cyl. In-line OHVType: Waste-gate Turbocharged with

Air to Air IntercooledDisplacement: 12 litre (11967cc)Bore: 128mmStroke: 155mmPower (DIN): 295kW @ 1900 rpmTorque (DIN): 2000Nm @ 1100 rpmMaximum Engine Speed: 2100 rpmCooling System: Water Cooled with Viscous Coupling FanAir Cleaner: Paper Element Type with Restrictor Indicator

Vertical Intake Mounted on Clean Air Side (RH)Emission Control: Selective Catalytic Reduction (SCR)

FuelIInjection System: Unit Pump InjectionFuel Capacity: 400 Litres Rectangular Alloy Tank

with Locking CapMax Fill to approx 96% of Air Capacity

Filtration: Filter with Water Separator and Dash IndicatorAdBlue Exhaust Fluid Tank: Locking Cap TypeCapacity: 40Litres

ElectricalVoltage: 24V Negative GroundAlternator Capacity: 80 ampStarter Capacity: 24V-7.0kWBattery Capacity: 2x12V, 150Ah/20hrBattery Specification: 2x145G51 (N150)Headlamp - Type: HalogenFog Light: Halogen

CLUTCHControl: Automated Manual (no clutch pedal)Specification: C12W43P Single Plate 430mm diameter

TransmissionFuso G230-12 (INOMAT-I I)Type: 12 Speed Automated ManualFeatures: Crawler Mode Skip Shift Function for Light Loads ECO Mode to Minimise Fuel UsageRatios: 1st 2nd 3rd 4th 5th 6th 7th 11.672 9.101 7.055 5.501 4.400 3.430 2.652 8th 9th 10th 11th 12th RHigh RLow 2.068 1.603 1.250 1.000 0.779 9.101 11.673 Torque limited to 1775Nm from 1st to 3rd and ReversePTO Openings: LH Side & Rear XMSN

Propeller shaftType: Three Main Shafts P140

Inter-axle Shaft P10

Front AxleFUSO F090TType: Reverse Elliot ‘I’ BeamCapacity: 7500kg

REAR AXLE FUSO R10/D10Type: Full Floating Hypoid Type Tandem Drive

with Inter-Axle Diff LockCapacity: 21600kg*Ratio: 4.625:1*See MAX LOADING for vehicle capacities

The new generation intercooled, turbocharged powerplant provides 24% more torgue and protects theenviroment with its SCR Emmision Control.

Suspended driver’s seat withmultiple adjustments & lumbarsupport for driver comfort.

Spacious, climate controlled cabin with central locking, electric windows, radio / CDplayer, and automated transmission, makes the Fuso Heavy Truck range a winner indriving and operational comfort and ease.

GVM:24000kg

GCM:40000kg Air Rear Suspension

SteeringType: Integral Ball and NutSteering Column: Tilt/Telescopic Adjustable

BrakesType: Full Air, Dual Circuit with FUSO Taper Rollers, ABS plus ASR (Anti Slip Regulator) Size - Front: 410x150mm

- Rear: 410x200mmPark Brake: Rear Wheel Spring ActuatedAuxiliary: Powertard Exhaust Brake with 4 Levels of RetardationTailer: Hand Control Valve, Air Lines Coupling and Electrical Cable

FRONT SUSPENSIONType: Long Taper LeafSize: 1500x90mm LeavesShock Absorbers: Double Acting

REAR SUSPENSION (air)Type: Trailing Arm Air Suspension with Dump ControlRoad Friendly Rated: Approval Number RF2011Air Bags: 2x250mm dia.Capacity at Ground: 18000kg total*Shock Absorbers: Double Acting*See MAX LOADING for vehicle capacities

CHASSISType: Reinforced Parallel ChannelSize: 300x90x7.0mmWidth: 840mmTensile Strength: 540Mpa

WHEELS & TYRESWheel - Type: 11, Single Piece Steel Disc (Including Spare) - Size: 22.5x8.25DC - Stud Pattern: 10x335mm PCDTyre - Size Front: 295/80R22.5 152/148 - Size Rear: 11R22.5 148/145 - Size Spare: 295/80R22.5 152/148

OPTIONAL EQUIPMENTR02: Limited Slip Differential (LSD) for Both Diffs

MASS (kg - estimated)*Model Front Rear TotalFV54ST3VFAA 4395 3670 8065Note: Mass (est.) includes oil and water but excludes spare wheel, tools & fuel* Weights provided are subject to 3.5% variation (+/-)

instrumentsGauges: Speedometer with Odometer

TachometerAir Pressure (2)Fuel LevelWater TemperatureAdBlue Level

Colour Information Display Fuel ConsumptionService IndicatorsHour Meter and TripmeterOil Level Check

Warning Lamps: ABSASRTurn SignalHigh BeamEngine Brake & Shift Down BrakeDriver’s Seat BeltFog LampAll Major System FaultsOil LevelAd Blue LowAir Suspension LowAlternatorDifferential LockCruise ControlCab Tilt Lock

Warning Lamp/Buzzer: Air PressureOil PressureHill StartPark BrakeEngine OverrunEngine Overheat / Low Coolant Level

Cab featuresType: All Steel Forward Control Elec / Hyd Tilt Cab:Mounting: Air Suspended Front and RearColour: Natural WhiteWindscreen Wipers: 2 Speed + Intermittent Cycle

with Integrated Washer NozzlesRear Vision Mirrors: 2 x External

Flat Main Mirrors Plus Convex SpottersMotorised Main Mirrors, All Mirrors Heated

Seating Capacity: 3Seat Belts Lap Sash Belts for Outside Seating Positions

Lap Belt for Centre SeatSeats - Driver: Suspended with Lumbar Support

- Passenger: 2 Fixed

MAX. LOADING Model Front Rear Total FV54ST 6500kg 18000kg 24000kg

Safety is paramount with driver’s air bag, seat belt pre-tensioners, cruise control, hill start systemon automated models, motorised mirrors, easy to read comprehensive instruments and left handtranson window combine to provide uncompromised driver safety.

SCR is a simple system that allows the engine to be tuned for optimalcombustion and injects AdBlue into the exhaust to reduce emissions.

Unless specified in writing herein the accessories, applications, bodies or equipment depicted in this document are for illustration purposes only and may not be available from Mercedes-Benz Australia/Pacific Pty Ltd (ABN 23 004 411 410) (“MBAuP”).No representation or warranty whatsoever is given in relation to any accessories, applications, bodies or equipment or suitability of same that are shown herein that may be manufactured, supplied or fitted by a party other than MBAuP. MBAuP reserves the right without notice or obligation to discontinue or make changes to the colour, designs, materials and specifications of the products and options referred to herein at any time. For the most current information and in order to ascertainwhich accessories, applications, bodies and equipment are available from MBAuP please contact your authorised Mitsubishi FUSO truck and bus dealer. Fuso is a registered trademark of Mitsubishi Fuso Truck & Bus Corporation.Copyright © MBAuP. Reproduction in whole or part prohibited without written approval. Date: Nov. ’11 Part No. TSH54C

Call 1300 426 812 or visit fuso.com.au

SPECIFICATIONS

warranty

3 YEAR & 3 YEARBasic/Powertrain3 Years, 200,000kms or 4,000 operating hours(whichever comes first) 3 Years Cab Perforation/Anti Corrosion

STANDARD FEATURESDrivingDriver’s Air Bag and Seat Belt Pre-tensionersSuspended Driver’s SeatHill Start SystemCentral LockingElectric Windows Cruise Control (range 40 to 100km/h)LH Transom Window24V Accessory Power Outlet / Cigar LighterClimate ControlOpening Rear Quarter GlassRadio / CD PlayerCup HolderFluorescent Cabin LampTrailer Package including Trailer “Stretch Brake”StorageCentre Storage ConsoleDash Storage Tray 2 DINDual Overhead StorageCoat Hooks Cab: ExternalFog LightsDoor Side Impact BeamsRoof Mounting Points (max. static load 70kg)Front End-Outline Marker LampsDual Air Horns ChassisIntegrated Front Underrun System (FUPS)Tool KitReverse Warning BuzzerClear Top of Chassis Rail for ease of Body Fitment

DIMENSIONS (mm)Wb = Wheel Base FV54STWidth Front Fender: 2490 Rear Axle: 2470 Front Track: 2055 Rear Track: 1850 Frame: 840 Length A Overall: 11320 B Extreme Axle Spacing: 7040 C Front Overhang: 1370 D Wheelbase: 6380 F Rear Axle Spacing 1320 G Front Axle to Rear of Cab: 700 H Rear of Cab to Trailer Valve 183 I Frame, Trailer Valve to Rear Axle 5497 J Frame, Rear Axle to End: 3570 Height N Overall: 3301 O Air Intake to cab Roof 205 P Cab to Ground: 3096 Q Cab to Frame: 2090 R Rear Frame to Ground: - Inflated: 1033 - Deflated: 976Turning Circle (kerb to kerb): 20.6m

Performance - (Calculated-paved road)Electronically Speed Limited to (km/h) 100Engine Speed at 100km/hr in top gear (rpm) 1891Gradeability** at Rated GCM: 31%** This is Theoretical Performance (it may vary under different conditions).

Note: Chassis reinforcement must be utilised for Tipper/Demountable type bodyconfigurations.

To conform with ADR 13/00 (lighting requirments) the following must be adheredto at body installation.

- If other than a flat type or tipper body is fitted, rear end out-line marker lampsmust be installed.

- If overall length exceeds 6.0 metres, side reflectors must be installed. - If overall length exceeds 7.5 metres, side marker lamps must be installed. To conform with ADR 42/04 (General Safety), rear wheel guards must be fitted tothe vehicle.