Fulham has developed a smart IoT convergent solution that is the industry’s easiest to commission and operate DALI management and control system. Building on the company’s technology strengths, the solution delivers on the promise of lighting control systems with unmatched flexibility and expandability. With Fulham’s LED drivers and elitedali™ software, you and your customers can enjoy the industry’s easiest-to-use, flexible, scalable and sustainable DALI control system available on the market today.

• Advanced driver management and internet enabled control system - Simplified installation and commissioning - Real-time access to all lighting device information - Addressing sustainability and health & wellness issues

• Intelligent programmable drivers - Output current can be set in 1mA increments - Flicker free dimming down to 1% - Dims to 1% of programmed current - Power to driver not required during programming - NTC thermal feedback for LED module thermal protection

• elitedali™ ready for global to small office or commercial projects - Internet of Things (IoT), smart device and cloud analytics compatible - Powered by any Tridium® Niagara Framework™ platform

• Fully compliant Digital Addressable Lighting Interface (DALI) support - Only global IEC 62386 communications standard for

intelligent light fixtures - Works over a simple low cost two wire network - Thousands of compatible fixtures available worldwide

The Smart Convergent System Solution for DALI® Controlled LightingFulham Lumo Series and WorkHorse LED DALI Drivers and elitedali™ software

RoHSCOMPLIANT

www.fulham.comEurope • North America • China • India • Latin America • Middle East

Unit 9b, Intec 2, Wade Road, Basingstoke, Hampshire RG24 8NE, United Kingdom • +44 1256 818700 • mwelch@fulham.comAll trademarks are the property of their respective owners | ©Fulham Co. Inc., 2017 | PN: FLYER-LED-CNS | REV: AUG17

Fulham’s elitedali™ for Niagara DALI driver enables Certified Niagara system integrator partners and OEMs to use existing Niagara Framework tools, skills and knowledge to connect up to 1,536 DALI lamps and 24 DALI networks to 1 Niagara Platform using only Niagara for all DALI network and device commissioning, control, maintenance, management, visualisation and analytics.

• Discover and commission networks of DALI open standard light fixtures• No Third Party commissioning tools or processes required• Automatic DALI device modeling• No data IO mapping and labeling required, reduced commissioning time and risk• Use with any DALI manufacturers’ products conforming to the DALI IEC 62386 standard

For more information on finding or becoming a Certified elitedali™ Partner, visit www.elitedali.com,

send an email to mwelch@fulham.com or call +44 (0) 1256 818700.

Licensed Fulham NiagaraDALI serial driver software

Up to 24 Fulhamelitedali interfacemodules (eDIM™)

SingleDALI®

device

Network ofDALI®

devices

Potential maximum of 1536open standard DALI devices*

Ethernet | TCP/IP | HTTPXML | BACNet

Fulham Lumo Series and WorkHorse LED DALI Drivers

WattsOutput Current

(mA)

OutputVoltage(VDC)

Model Number Input Voltage(VAC)

Dimensions (inches)

(L x W x H)Programmable Case

Type

30 100 - 1000 7 - 43 L05025 220 - 240 157 x 42 x 32 No Linear w/ End Terminals

40 100 - 1000 7 - 55 L05040 220 - 240 157 x 42 x 32 No Linear w/ End Terminals

40 250 - 1500 10 - 57 T1A1UNV105P-40E** 120-277 (50/60) 275 x 31 x 25 Yes Linear w/ End Terminals

60 250 - 1500 10 - 57 T1A1UNV105P-60E** 120-277 (50/60) 237 x 41 x 30 Yes Linear w/ End Terminals

60 250 - 1500 10 - 57 T1A1UNV105P-60F** 120-277 (50/60) 127 x 76 x 31 Yes Compact w/ End and Back Terminals

60 250 - 1500 10 - 57 T1A1UNV105P-60G** 120-277 (50/60) 127 x 76 x 31 Yes Compact w/ End andBack Terminals, Back Studs

* Subject to available bandwidth and resources on the chosen Niagara N4 platform.**All WorkHorse LED drivers use SmartSet one-touch Programming. All of the above are also available with 0-10V dimming