Proceedings of the ASME

9th International Conference

on Fuel Cell Science, Engineering,and Technology

- 2011 -

FUELS AND INFRASTRUCTURE

GLOBAL MARKETS, APPLICATIONS, AND INITIATIVES

HIGH TEMPERATURE FUEL CELL TECHNOLOGIES

LOW TEMPERATURE FUEL CELL TECHNOLOGIES

MATERIALS FOR HIGH TEMPERATURE FUEL CELLS

MATERIALS FOR LOW TEMPERATURE FUEL CELLS

MODELING, DESIGN, AND OPTIMIZATION FOR HIGH TEMPERATURE FUEL CELLS

MODELING, DESIGN, AND OPTIMIZATION FOR LOW TEMPERATURE FUEL CELLS

POSTERS

PRODUCTION AND SCALE-UP (INCLUDES POWER CONDITIONING)

SYSTEMS, BALANCE OF PLANT INTEGRATION

presented at

ASME 2011 9th INTERNATIONAL CONFERENCE ON FUEL CELL SCIENC I

ENGINEERING, AND TECHNOLOGY

AUGUST 7-10, 201!

WASHINGTON, DC, USA

sponsored by

ADVANCED ENERGY SYSTEMS DIVISION, ASMf

ASME

Three Park Avenue New York, N.Y. 10016

CONTENTS

9th FUEL CELL SCIENCE, ENGINEERING AND

TECHNOLOGY CONFERENCE

FUELS AND INFRASTRUCTURE

FuelCeil2011-54106 1

The U.S. Department of Energy's Research and Development Portfolio of HydrogenProduction Technologies

Roxanne Garland, Sara Dillich, Eric Miller, Kristine Babick, and Kenneth Weil

FuelCell2011-54155 9

Trace Level Sulfur Sensor for Fuel Cells

Murat Yasar, Rama K. Ede, and A. Kaan Kalkan

FuelCell2011-54673 17

Experimental and Numerical Evaluation of the By-Pass Flow in a Catalytic Plate Reactor for

Hydrogen Production

Haftor 0. Sigurdsson and S0ren K. Kaer

FuelCell2011 -54939 27

Designing a Recharging Grid for the Hybrid Vehicle System: Part I

Etim U. Ubong, James Dorsey, Kevin Armstrong, Anthony Bucchi, Robert Cady,Marc Bastarache, Thomas Parrish, Scott Hoffman, Kevin Szymanski, and Alec Walker

FuelCell2011 -54940 35

Logistics for Designing a Recharging Grid for the Hybrid Vehicle System: Part II

Etim U. Ubong, Cameron Caufield, Steven Lathers, Ricky Gonzalez, Robert Perzyk,Tianao Li, Tom Manning, and George Zaharopoulos

GLOBAL MARKETS, APPLICATIONS, AND INITIATIVES

FuelCel12011-54184 41

Current Mode Control of Fuel Cell Fed Interleaved Boost Converter for Ripple Current

Minimization

K. Latha, M. Maadhuri, B. Uma Maheswari, N. Rajalakshmi, and K. S. Dhathathreyan

FuelCell2011 -54900 47

5 KWe + 5 KWT PEM-FC Generator From Bioethanol: Fuel Processor and Development of

New Reforming Catalystsllenia Rossetti, Cesare Biffi, Lucio Forni, Gian Franco Tantardini, Giuseppe Faita,

Mario Raimondi, Edoardo Vitto, and Andrea Salogni

HIGH TEMPERATURE FUEL CELL TECHNOLOGIES

FuelCell2011 -54170 55

Methane-Based Flame Fuel Cell Using Anode Supported Solid Oxide Fuel Cells

Kang Wang, Pingying Zeng, and Jeongmin Ahn

v

FuelCel 12011-54230 59

Non-Propulsive Miniature Power Device Based on SOFC and Combustion-Driven

Thermal Transpiration PumpPingying Zeng, Kang Wang, and Jeongmin Ahn

FuelCell2011 -54622 63

Exploring Remedies for PH3 Poisoning of a Ni-YSZ Anode in Coal-Syngas Fuel

Chunchuan Xu, John W. Zondlo, and Edward M. Sabolsky

FuelCel12011-54709 73

Design and Analysis of Hybrid Guideway Heating System for Morgantown Personal

Rapid Transit

Anand Vedam and John E. Sneckenberger

FuelCell2011-54760 81

Experimental Comparison and Performance Evaluation of Planar Solid Oxide Single Cell

Giovanni Cinti, Umberto Desideri, Gabriele Discepoli, Elena Sisani, and

Daniele Penchini

FuelCell2011-54783 85

Energy and Exergy Analysis of Gas Turbine - Fuel Cell Based Combined Cycle Power Plant

M. Sreeramulu, A. V. S. S. K. S. Gupta, and T. Srinivas

FuelCell2011-54913 95

PH3 Effects on the Electrochemical Degradation of SOFC Anode

Huang Guo, Gulfam Iqbal, and Bruce S. Kang

LOW TEMPERATURE FUEL CELL TECHNOLOGIES

FuelCell2011-54045 103

Development of an Optical Sensor for Temperature Measurement and Water DropletDetection in PEMFC Gas Channels

Kristopher inman, Xia Wang, and Brian Sangerozan

FuelCell2011-54181 111

Vapor Delivery Systems for the Study of the Effects of Reformate Gas Impurities in

HT-PEM Fuel Cells

Samuel Simon Araya, Spren Knudsen Kaer, and Spren Juhl Andreasen

FuelCeM2011-54340 121

Comparison of Water Thickness Profiles of Compressed PEMFC GDLs

Pradyumna Challa, James Hinebaugh, and A. Bazylak

FuelCel12011-54344 127

Multiple Degradation Phenomena in Polymer Electrolyte Fuel Cell Operation With

Dead-Ended Anode

Toyoaki Matsuura, Jason B. Siegel, Jixin Chen, and Anna G. Stefanopoulou

FuelCell2011-54408 137

The Role of Channel Plurality in Two-Phase Flow Instabilities in PEM Cathode Channels

Nicholas Siefert, Colin O'Shea, and Shawn Litster

vi

FuelCell2011-54489 145

The Effect of Flow Channel Surface Properties and Structures on Water Removal and

Fuel Cell Performance

Brooks R. Friess, Samuel C. Yew, and Mina Hoorfar

FuelCel12011-54538 153

Hydrogen Generation Using Aluminum Powder for Fuel Cell Applications

Faizan Ahmad, Moshan Kahandawala, Anupriya Krishnan, and Sukh Sidhu

FuelCel12011-54588 163

Soft X-Ray Investigation on the Effect of Microstructure of PEMFC Porous Layers on

Liquid Water TransportTakashi Sasabe, Phengxay Deevanhxay, Shohji Tsushima, and Shuichiro Hirai

FuelCell2011-54697 171

Analysis of a Passive Tubular Direct Methanol Fuel Cell

Travis Ward, Xianglin Li, and Amir Faghri

FuelCel12011-54705 181

Effects of Wettability and Flow Direction of Cathode Channel on Plugging Phenomenon in

Polymer Electrolyte Fuel Cell

Ryo Taniguchi, Kosuke Nishida, Hisashi Kamada, Shohji Tsushima, and Shuichiro Hirai

FuelCell2011-54712 187

Experimental Investigation of Gas Purge and Voltage Undershoot for an

Air-Breathing PEMFC

Shuang Zhai, Su Zhou, Pengtao Sun, Fengxiang Chen, Jigao Niu, and Mingchao Ding

FuelCell2011-54732 195

Bubbly, Two-Phase Flow in the Anode Channel of a Passive, Tubular Direct

Methanol Fuel Cell

Hafez Bahrami and Amir Faghri

FuelCelI2011-54734 205

Experimental Performance Evaluation of a High Temperature PEM Fuel Cell PrototypeUnder Various Operating Conditions

Susanta K. Das

FuelCel12011-54781 211

On-Line Gas Measurements Within PEM Fuel Cell Flow Fields by Electric Arc Emission

SpectroscopyHans Bettermann, Peter Fischer, Martin Labus, and Arno Reichelt

FuelCel12011-54918 217

Air-Breathing Membraneless Laminar Flow Fuel Cell With Flow-Through Anode

Seyed Ali Mousavi Shaegh, Nam-Trung Nguyen, and Siew Hwa Chan

FuelCell2011-54944 223

Platinum Dissolution in Proton Exchange Membrane Fuel Cell Under Mechanical Vibrations

Georgiy Diloyan and Parsaoran Hutapea

vii

MATERIALS FOR HIGH TEMPERATURE FUEL CELLS

FuelCell2011-54076 231

Synthesis of Mixed Oxide-Ion and Carbonate-Ion Conductors Supported by a Prefabricated

Porous Solid Oxide Matrix

Lingling Zhang, Xue Li, Siwei Wang, Kevin Gregory Romito, and Kevin Huang

FuelCe!l2011-54750 237

Manganese-Cobalt Spinel Coatings for SOFC Metallic Interconnects Manufactured byConventional Plasma Spraying (PS) and Suspension Plasma Spraying (SPS)

Jouni Puranen, Leo Hyvarinen, Juha Lagerbom, Mikko Kylmalahti, Heli Koivuluoto, and

Petri Vuoristo

FuelCel12011-54903 245

Electrical Properties of SRo.seY0.0BTiO3 Under Redox and Full Cell Fabrication Conditions

Li Zhao and Jacob Brouwer

FuelCell2011-54938 251

Fuel Flexible and Reversible Operation of Yttrium-Doped Strontium Titanate Anode

Supported SOFCLi Zhao and Jacob Brouwer

FuelCell2011-54946 259

Effect of Porous Electrode Morphology on Broadband Dielectric Characteristics of

SOFC and Methodologies for Analytical Predictions

Prasun Majumdar, Md. Raihan, Kenneth Reifsnider, and Fazle Rabbi

FuelCell2011-54947 267

Full Field Imaging of Nickel Oxidation States in Solid Oxide Fuel Cell Anode Materials byXanes Nanotomography

William M. Harris, George J. Nelson, John R. Izzo, Jr., Kyle N. Grew, Wilson K. S. Chiu,

Yong S. Chu, Jaemock Yi, Joy Andrews, Yijin Liu, and Piero Pianetta

FueICefI2011-54950 271

HeteroFoaMs: Electrode Modeling in Nano-Structured Heterogeneous Materials for

Energy SystemsW. K. S. Chiu, A. V. Virkar, K. L. Reifsnider, F. Rabbi, and Q. Liu

MATERIALS FOR LOW TEMPERATURE FUEL CELLS

FuelCell2011-54278 277

Oxygen Reduction Reaction Evaluation of Platinum Catalysts Formed via the Reactive

Spray Deposition TechniqueJustin Roller, Radenka Marie, Roberto Neagu, and Frank Orfino

FuelCell2011-54439 287

Toward Carbon Foam Structures in a Microfluidic Fuel Cell

D. Fuerth and A. Bazylak

FuelCell2011-54561 293

Experimental Study of Electrical Switching Characteristics of Vanadium Oxide Thin Films on

Bipolar Plates for Improving Thaw-at-Start

Hye-Mi Jung, Jung-Hun Noh, and Sukkee Urn

viii

FuelCel12011-54661 301

Graphene Reinforced Composite Bipolar Plate for Polymer Electrolyte Membrane Fuel Cell

Biraj Kumar Kakati, Avijit Ghosh, and Anil Verma

FuelCell2011-54824 309

Parametric Investigations of Direct Methanol Fuel Cell Electrodes Manufactured by SprayingBabar M. Koraishy, Sam Solomon, Jeremy P. Meyers, and Kristin L Wood

MODELING, DESIGN, AND OPTIMIZATION FOR HIGH TEMPERATURE

FUEL CELLS

FuelCel12011-54006 317

Modeling Validation and Simulation of an Anode Supported SOFC Including Mass and

Heat Transport, Fluid Flow and Chemical Reactions

Martin Andersson, Jinliang Yuan, Bengt Sunden, Ting Shuai Li, and Wei Guo Wang

FuelCell2011-54015 329

The Kinetics Effect in SOFCs on Heat and Mass Transfer Limitations: Interparticle,Interphase and Intraparticle Transport

Hedvig Paradis, Martin Andersson, Jinliang Yuan, and Bengt Sunden

FuelCell2011-54104 337

Performance Study of a Planar Solid Oxide Fuel Cell Using a COMSOL Based 2D Model and

Actual Cell Testing Geometry and Operating Conditions

Gianfranco DiGiuseppe, Yeshwanth Javare Gowda, and

Naveen Kumar Honnagondanahalli

FuelCel12011-54138 355

Modeling of On-Cell Reforming Reaction for Planar SOFC Stacks

Choongmo Yang, Hyung-Tae Lim, Soon Cheol Hwang, Dohyung Kim, Kevin Lai,

Brian J. Koeppel, Kurtis P. Recknagle, and Moe A. Khaleel

FuelCell2011-54415 365

Simultaneous Turbine Speed Regulation and Fuel Cell Airflow Tracking of a SOFC/GT

Hybrid Plant With the Use of Airflow Bypass Valves

Alex Tsai, David Tucker, and David Clippinger

FuelCell2011-54427 375

Modeling Ultrasonic Sealing of Membrane Electrode Assemblies for High-TemperaturePEM Fuel Cells

Dave C. Guglielmo, Todd T. B. Snelson, and Daniel F. Walczyk

FuelCel12011-54436 381

Performance Improvement of a Circular MCFC Through Optimal Design of the Fluid

Distribution SystemAdriano Sciacovelli, Vittorio Verda, Cristina Amelio, Carlo Repetto, and Gustavo Diaz

FuelCell2011-54443 391

Network Model for the Analysis and Diagnosis of Large SOFC Stacks

Vittorio Verda, Adriano Sciacovelli, and Francesco Colella

ix

FuelCel12011-54505 399

Optimization of an Integrated SOFC-Fuel Processing System for Aircraft PropulsionThomas E. Brinson, Juan C. Ordonez, and Cesar A. Luongo

FuelCel12011-54591 409

A Real-Time Spatial SOFC Model for Hardware-Based Simulation of Hybrid Systems

Dirnitri Hughes, William J. Wepfer, Kevin Davies, J. Christopher Ford, Comas Haynes,

and David Tucker

FuelCell2011-54613 429

A Degradation Model for Degradation of Solid Oxide Fuel Cell Anodes Due to Impurities

in Coal SyngasFatma N. Cayan, Suryanarayana Ft. Pakalapati, and Ismail Celik

FuelCell2011-54623 ,439

Numerical Modeling of Solid Oxide Fuel Cell Operating on Biogas

Raju S. Pakalapati, Yasemin Vural, Ismail Celik, Chunchuan Xu, and John Zondlo

FuelCell2011-54686 449

Implementation of a Model-Based Methodology Aimed at Detecting Degradation and

Faulty Operation in SOFC SystemsDario Marra, Cesare Pianese, and Marco Sorrentino

FuelCell2011-54735 457

Heterogeneous Electrode Designs for Planar SOFC Optimizations

Junxiang Shi and Xingjian Xue

FuelCelI2011-54761 465

Three-Dimensional CFD Modeling of Tubular Solid Oxide Fuel Cells With Different Fuels

Sachin L Puthran, Umit O. Koylu, Serhat Hosder, and Fatih Dogan

FuelCel12011-54803 475

Effect of Geometry and Operating Parameters on Simulated SOFC Stack Temperature

UniformityBrian J. Koeppel, Kevin Lai, and Moe A. Khaleel

FuelCell2011-54829 485

A Thermal-Electrochemical Model of a Fuel Cell Stack Block

David Beedie, Christopher Knight, Matthew Horsfield, and Roy Moobola

FuelCell2011-54883 495

Simulation of Turbulent Combustion in Porous Ceramic Materials

Marcelo J, S. deLemos and Jose E. A. Coutinho

FuelCell2011-54894 503

Effect of the Microstructure of Porous Composite Electrodes on the Electric Power Densityof Solid Oxide Fuel Cells

Siamak Farhad and Feridun Hamdullahpur

x

FuelCell2011-54921 513

Solid Oxide Fuel Cell System Development for Stationary Power ApplicationsHossein Ghezel-Ayagh, Stephen Jolly, Keith E. Davis, James Walzak, Dilip Patel,

Rich Way, and David Stauffer

FuelCell2011-54927 525

Lattice Boltzmann Simulation of Solid Oxide Fuel Cell Performance

Yousheng Xu, Pengtao Sun, Hui He, and Yang Liu

FuelCell2011-54929 537

Quantification of Microstructural and Transport Properties of Solid Oxide Fuel Cells From

Three-Dimensional Physically Realistic Network Structures

Naga Siva Kumar Gunda and Sushanta K. Mitra

FuelCel12011-54943 543

Synthesis of Nanosize Ceria by a Combustion Process and Electrical Characterization of

HeteroFoaM Porous Ceria Electrodes

J. Wright and A. V. Virkar

FuelCel12011-54959 549

Operation of Carbonate Fuel Cell (MCFC) Using SyngasJoseph Mclnerney, Hossein Ghezel-Ayagh, Robert Sanderson, and Jennifer Hunt

MODELING, DESIGN, AND OPTIMIZATION FOR LOW TEMPERATURE

FUEL CELLS

FuelCel12011-54069 559Performance Study of a Bi-Cell Piezoelectric Proton Exchange Membrane Fuel Cell With a

Nozzle and Diffuser

Hsiao-Kang Ma, Jyun-Sheng Wang, Wei-Han Su, and Wei-Yang Cheng

FuelCell2011-54116 567

Modeling Effects of Two-Phase Transport in Cathode Gas Flow Channel on PEM Fuel Cell

Performance

Yun Wang and Ken S. Chen

FuelCell2011-54118 575

Two-Phase Flow in a Gas Flow Channel of Polymer Electrolyte Fuel Cells

Sung Chan Cho and Yun Wang

FuelCell2011-54233 583

Effect of Inlet Flow Conditions on Flow Uniformity in a PEM Fuel Cell

Lisa M. Grega and Steven Voinier

FuelCell2011-54257 591

Through-Plane Gas Permeability of Proton Exchange Membrane Fuel Cell Gas

Diffusion LayersA. Tamayol, F. McGregor, and M. Bahrami

xi

FuelCell2011-54259 601

The Effect of lonomer Thin Films in lonomer- and Water-Filled Agglomerate Models

Peter Dobson and Marc Secanell

FuelCell2011-54262 613

An Experimental Investigation of Air Water Flow Through Different Flow Field Designs of a

PEMFC Bipolar Plate in the Presence of Micronized Wax

Aditya Utturkar and Abhijit Mukherjee

FuelCell2011-54298 623

Compression Modeling and Transport Characterization of the PEM Fuel Cell

Diffusion Medium

Volker P. Schulz, Partha P. Mukherjee, and Heiko Andra

FuelCell2011-54364 629

Modeling the Effective Thermal Conductivity of an Anisotropic Gas Diffusion Layer in a

Polymer Electrolyte Membrane Fuel Cell

J. Yablecki and A. Bazyiak

FuelCell2011-54369 637

Maximizing the Use of Platinum Catalyst by Ultrasonic Spray Application

Robb Engle

FuelCell2011-54376 645

An Energy Balance Model for a Direct Methanol Fuel Cell

Yu-Jen Chiu and Yen-Ling Lin

FuelCell2011-54395 653

A Parametric Study on Microfluidic Vanadium Fuel Cells

Jin wook Lee, Deepak Krishnamurthy, Peter Hsiao, and Erik Kjeang

FuelCell2011-54410 663

Experimental Analysis of a Single Cell Flowing Electrolyte-Direct Methanol Fuel Cell

Nasim Sabet-Sharghi, Cynthia A. Cruickshank, and Edgar Matida

FuelCel12011-54422 669

PEM Fuel Cell Gas Diffusion Layer Modelling of Pore Structure and Predicted Liquid

Water Saturation

J. Hinebaugh and A. Bazyiak

FuelCell2011-54437 677

Semi-Empirical Flow and Pressure Distribution Modeling of a Flowing Electrolyte Direct

Methanol Fuel Cell Stack

Yashar Kablou, Cynthia A. Cruickshank, David Ouellette, and Edgar Matida

FuelCel12011-54449 685

Modeling of Carbon Dioxide Formation in Flowing Electrolyte-Direct Methanol Fuel Cells

David Ouellette, C. Ozgur Colpan, Edgar Matida, and Cynthia A. Cruickshank

xii

FuelCell2011-54532 695

Characterizing Performance of a PEM Fuel Cell for a CMET Balloon

Demise A. McKahn and Whitney McMackin

FuelCell2011-54553 703

3D Numerical Study of a Flowing Electrolyte-Direct Methanol Fuel Cell With an

Implemented Bi-Layered Membrane Electrode Diaphragm AssemblyP. A. Cornellier, E. Matida, and C. A. Cruickshank

FuelCell2011-54554 711

Design of Air, Water, Temperature and Hydrogen Controls for a PEM Fuel Cell System

Jong-Woo Ahn, Jinglin He, and Song-Yul Choe

FuelCell2011-54640 719

Parametric Analysis of the Cathode Catalyst Layer of Proton Exchange Membrane

Fuel Cells Using Artificial Neural Network

N. Khajeh-Hosseini-Dalasm, S. Ahadian, K. Fushinobu, and K. Okazaki

FuelCel12011-54654 727

Performance of PEM Fuel Cells at Sub-Freezing Temperatures

Jeffrey Mishler, Yun Wang, Roger Lujan, Rodney L. Borup, and Rangachary Mukundan

FuelCell2011-54668 735

Oxygen Transport Resistances Induced by Rib/Channel GeometryTakeshi Shiomi, Yosuke Fukuyama, Shinichi Miyazaki, Yuichiro Tabuchi, Norio Kubo,and Hiromasa Sakai

FuelCel12011-54674 745

Water Crossover Experiments in an Open-Cathode Direct Methanol Fuel Cell

C. C. Kuo, L. M. Neat, 0. D. Crisalle, W. E. Lear, and J. H. Fletcher

FuelCell2011-54693 757

Toward the Development and Validation of a Comprehensive PEM Fuel Cell Model

Ken S. Chen, Brian Carnes, Liang Hao, Yan Ji, Gang Luo, Chao-Yang Wang, and

Yun Wang

FuelCel12011-54744 767

Three-Dimensional Numerical Study of Circular-Fin Tube Heat Exchanger for UAV

Haejung Sung, Sanggyu Kang, Hanseok Kim, Hangseok Choi, Hunchae Park, andKook Young Ahn

FuelCel12011-54746 773

Validation and Uncertainty Quantification of a Two-Phase, Multidimensional PEMFC

Computer Model Using High-Resolution Segmented Current Collector Data

Brian Carnes, Ken S. Chen, Liang Hao, Gang Luo, Yan Ji, Chao-Yang Wang, and

Dusan Spernjak

FuelCel12011-54768 781

Modeling and Experiments of Voltage Transients of PEM Fuel Cells With the

Dead-Ended Anode

Jason B. Siegel, Anna G. Stefanopoulou, and Serhat Yesilyurt

xiii

FuefCell2011-54788 789

Prediction the Differences of Permeability Between Carbon Fiber Paper and Carbon Fiber

Cloth in PEM Fuel Cells

Yuan Gao

FueICell2011-54794 799

Computational Analysis of Heat Transfer in Air-Cooled Fuel Cells

S. Shahsavari, M. Bahrami, and E. Kjeang

FuelCell2011-54879 809

Stress-Lifetime Characterization of Proton Exchange Membrane Using 3-D Digital ImageCorrelation and Pressure-Loaded Blister Tests

Chase M. Siuta, Scott W. Case, David A. Dillard, Robert B. Moore, Michael W. Ellis,

Yongqiang Li, Yeh-Hung Lai, and Craig S. Gittleman

FuelCell2011-54880 817

A Transient Fuel Cell Model to Simulate HTPEM Fuel Cell Impedance SpectraJakob Rabjerg Vang, S0ren Juhl Andreasen, and S0ren Knudsen Kaer

FuelCell2011-54882 831

On Modeling Development of Microscopic Spatial Structure for the Catalyst Layer in a

Proton Exchange Membrane Fuel Cell

Yu Xiao, Jinliang Yuan, and Bengt Sunden

FuelCell2011 54925 839

The Effect of Inhomogeneous Compression on Water Transport in the Cathode of a

PEM Fuel Cell

Anders C. Olesen, Torsten Berning, and S0ren Knudsen Kaer

FuelCell2011-54932 851

Modeling Water Content Distribution in the Polymer Electrolyte Membrane of PEM Fuel Cell

Bahareh Alsadat Tavakoli and Ramin Roshandel

FuelCell2011-54954 859

An Efficient Unsteady Two-Phase Flow Model for Cathode Gas Channels of a PolymerElectrolyte Fuel Cell

Suman Basu and Ashok Gopinath

FuelCell2011-54963 869

Proton Transfer in Polymer Electrolyte Membrane by Molecular Dynamics Method

Takashi Tokumasu

POSTERS

FuelCell2011-54115 875

Experimental Evaluation of Cell Temperature Effects on Miniature, Air-BreathingPEM Fuel Cells

Zachary R. Williamson, Daejoong Kim, Dae-Keun Chun, Cody W. Squibb, and

Tonghun Lee

xiv

FuelCell2011-54131 883

Status of Solid State Hydrogen Storage Technology for Fuel Cells in Korea

Moon-Sun Chung and Jong-Won Kim

FuelCell2011-54669 891

Synthesis of Highly Dispersed Carbon Supported Platinum Nanocatalyst for Fuel Cells

Hanna S. Abbo, Ivan R. Green, and Salam J. J. Titinchi

FuelCel12011-54670 893

Synthesis, Characterization and Physiochemical Properties of Platinum Supported on

Mesoporous Carbon

Salam J. J. Titinchi, Waheed Saban, Leslie Petrik, and Hanna S. Abbo

FuelCell2011-54838 895

Effect of Porosity Gradient in Gas Diffusion Layer on Cell Performance With Thin-Film

Agglomerate Model in Cathode Catalyst Layer of a PEM Fuel Cell

Chun-I Lee, Shiqah-Ping Jung, Kan-Lin Hsueh, Chi-Chang Chen, and Wen-Chen Chang

PRODUCTION AND SCALE-UP (INCLUDES POWER CONDITIONING)FuelCel12011-54308 903

Development of Production Technology for Membrane-Electrode Assemblies With

Radical Capturing LayerT. Kobayashi, E. Hirai, H. Itoh, and T. Moriga

FuelCell2011-54416 911

Direct Spraying of Catalyst Inks for PEMFC Electrode ManufacturingCasey J. Hoffman and Daniel F. Walczyk

FuelCelI2011-54441 919

Manufacturing Implementation of Ultrasonic Sealing of Membrane Electrode Assemblies

for High Temperature PEM Fuel Cells

Jake M. Pyzza, William M. Sisson, and Raymond Puffer

SYSTEMS, BALANCE OF PLANT AND INTEGRATION

FuelCell2011-54142 921

Response Surfaces for Key Controlled Variables in a Hybrid Solid Oxide Fuel Cell/Gas

Turbine SystemWilliam G. Rosen, Larry Banta, Megan Gorrell, Bernardo Restrepo, and David Tucker

FuelCell2011-54144 929

Control Valve Trajectories for SOFC Hybrid System Startup

Megan Gorrell, Larry Banta, William Rosen, Bernardo Restrepo, and David Tucker

FuelCell2011-54146 937

Characterization of a Solid Oxide Fuel Cell Gas Turbine Hybrid System Based on a Factorial

Design of Experiments Using Hardware Simulation

Bernardo Restrepo, Larry E. Banta, and David Tucker

xv

FuelCell2011-54315 949

Real-Time Hardware-in-the-Loop Tool for a Fuel Cell Hybrid System Emulator Test RigFrancesco Caratozzolo, Mario L. Ferrari, Alberto Traverso, and Aristide F. Massardo

FuelCell2011-54450 961

IGFC Response to Initial Fuel Cell Load for Various Syngas CompositionsDavid Tucker, Dimitri O. Hughes, and Comas L. Haynes

FuelCell2011-54502 975

Exergy & Economic Analysis of Catalytic Coal Gasifiers Coupled With Solid Oxide Fuel Cells

Nicholas Siefert and Shawn Litster

FuelCell2011-54616 983

Flow Uniformity of Catalytic Burner for Off-Gas Combustion of Molten Carbonate Fuel Cell

Sangseok Yu, Seokyeon Im, Young Duk Lee, Kook Young Ahn, and Sangmin Lee

FuelCell2011-54618 991

Experimental and Theoretical Performance Analysis of a High Temperature PEM Fuel Cell

Fed With LPG Using a Compact Steam Reformer

Nicola Zuliani, Rodolfo Taccani, and Robert Radu

FuelCel 12011-54719 999

C02 Separation From Combined Cycles Using Molten Carbonate Fuel Cells

G. Manzolini, S. Campanari, P. Chiesa, A. Giannotti, P. Bedont, and F. Parodi

FuelCell2011-54809 1009

Design and Performance Analysis of a 1 MW Solid Oxide Fuel Cell System for Combined

Production of Heat, Hydrogen, and Power

William L. Becker, Robert J. Braun, and Michael Penev

Author Index 1019

xvi