Calculus Vektor & Integral Fungsi Vektor [Compatibility Mode]
for Vektor Laboratory Exhaustliterature.puertoricosupplier.com/049/PH48523.pdf · Roof Curb for...
Transcript of for Vektor Laboratory Exhaustliterature.puertoricosupplier.com/049/PH48523.pdf · Roof Curb for...
Roof Curbfor Vektor Laboratory Exhaust
Advantages: •AllroofcurbsarespecificallydesignedtohandleloadrequirementsofVektorlaboratoryexhaustsystems
•CurbscanbepreshippedtoallowforjobsitepreparationpriortoVektorlabexhaustsystemdelivery
•VKCURBandGPFHLcurbscanbeshippedinsectionstoaccommodatelimitedaccessinstallations
•Pitchedcurbsareavailableforpropersysteminstallationonpitchedroofs
•AllVektor™curbsaredesignedtowithstand125mph(200km/hr)wind-loadswithouttheuseofguywires
Curbs are available for mounting Vektor exhaust fans as well as single or multiple bypass plenum systems.
GPFHLVektor™-H
GPFHL Vektor™-CD VKCURB
Vektor™-MD
Greenheck’s Roof Curbs are designed to meet the structural and design requirements of Vektor laboratory exhaust systems. All curbs are constructed of reinforced, corrosion-resistant heavy gauge steel to provide a solid mounting structure, designed for ease of installation.
May2009
Vektor Family of Lab Exhaust Systems
Vektor™-H Vektor™-MD Vektor™-CD Vektor™-ERS-MD
Vektor Roof Curb Features and OptionsGPFHL
Vektor™-HVKCURB
Vektor™-MDGPFHL
Vektor™-CD
Standard Construction Galvanized(CoatedOptional)
CoatedSteelGalvanized
(CoatedOptional)
Minimum Material Gauge 14Gauge 12Gauge 14Gauge
One-inch (25 mm) Insulation Optional Optional Optional
Pitched Curbs Optional Optional Optional
Formedandwelded,galvanizedorcorrosion-resistantcoatedsteelconstruction
Standardcurbheightis12inches(30cm)withoptionalheightsupthrough 36inches(90cm)
Curbsincludeformedsteelsupportframeworkforaddedstructuralintegrity
Optionalone-inch(25mm)insulationisavailabletopreventtheformation ofcondensation
Pre-drilledcurbcapmountsforconnectiontothefanorbypassplenumcurbcap(Vektor-MDonly)
Curbcapguideshelpcenterthefanorbypassplenumonthecurb(VKCURBonly)
Five-inchflangeformountingtotheroofdeck
Vektor Roof CurbFeatures and Options
6
5
5
2
1
7
6
4
2
1
7
6
4
3
3
Asaresultofourcommitmenttocontinuousimprovement, Greenheckreservestherighttochangespecificationswithoutnotice.
VektorRoofCurbRev.2May2009RGCopyright©2009GreenheckFanCorp.
Greenheck Roof Curb forVektor Systems
Steel Structural Support (by others) is per structural engineer and in accordance with load requirements and applicable building codes.
Concrete Structural Support (by others) is per structural engineer and in accordance with load requirements and applicable building codes.
Wooden Structural Support(by others) is per structuralengineer and in accordance with load requirements and applicable building codes.
Greenheck Roof Curb forVektor Systems
Greenheck Roof Curb forVektor Systems
STEEL CONCRETE WOOD
Continuous Weld or Stitch Weld
6 inch minimum stitch weld x 3.25 inch spacing; minimum
6 inch weld on each cornerHardware by others.
Install 1/2 inch bolt 5.5 inch maximum bolt spacing
4 inch maximum spacing from curb corner
Hardware by others.
Install 1/2 inch lag or thru-bolt as determined by structural engineer
with 1 inch washer in each hole from curb corner
Hardware by others.
Steel Concrete Wood
Prepared to SupportGreen Building Efforts