FN SERIES FLUID COOLER - heatcraftrpd.com21 Model Cross Reference LARKIN Single Wide Units Current...

1

FN SERIES FLUID COOLERPremier Solutions

2

What would your “ideal” fluid cooler solution include? Lower Operating Costs

Lower Noise Levels

Higher Reliability

Easier to Service

Greater Flexibility

Lower Initial Cost

FN Series has Solutions to Lower Your Operating Costs!

3

Energy Efficient Air Mover Choices– 1.5 Hp 830 RPM motors with Swept Blade– .5 Hp 540 RPM motor with Swept Blade


4

Energy Efficient Air Mover Choices (cont.)– Variable Speed EC Motor with Swept Blade


5

Models available with Low Fluid Pressure Drop Coils– 5/8” Diameter tubing– Reduced pumping power requirements

Optional High Efficiency Coil Design– Optional 12 and 14 FPI coils

Optional Fan Cycling Controls– FNH, FNL and FNQ models only– FNE models feature variable speed

FN Series has Solutions to Meet Your Noise Requirements!

6

Reduced Sound Air Mover Choices– 1.5 Hp 830 RPM and .5 Hp 540 RPM

motors– Patented Quiet Edge Fan Blade

• L and Q models only• Edge Treatment

– Variable Speed EC motors

Quiet Edge Fan Blade


7

Unit Sound Data (dBA @ 10 Ft)


8

Variable Speed EC Sound Data (dBA @ 10 Ft)

FN Series has Solutions for Your Reliability Needs!

9

Floating Tube Coil Design– ½” Anchor Tube Design– 5/8” Bushing Plate Design

Fan motors – Thermal overload protection – Permanently lubricated ball bearings

Cabinet Material– Galvanized (FNH, FNL and FNQ)– Aluminum (standard FNE)– Painted galvanized steel

½” Anchor Tube Design

5/8” Bushing Plate

FN Series has Solutions for Your Reliability Needs!

10

Optional Fin / Coil protection – Copper Fins– ProKoteTM Fins– Industrial Coating

Unit Factory Tested– Pressure and leak– Electrical circuit and motor run

Extensive Unit Warranty– 5 Year against leaks at the tube sheet and center supports– 3 year on VSEC motor (FNE Models)– 2 year unit warranty

FN Series has Solutions for Your Serviceability Needs!

11

Standard 10 Fin per Inch Coil– Optional 8 FPI coil availability

Patented ServiceEase Motor Mount– Available on FNH, FNL and FNQ

models

Optional Hinged Venturies– Available on FNH, FNL and FNQ

models

Patented ServiceEase Motor Mount

Optional Hinged Venturi

FN Series has Solutions for Your Serviceability Needs!

12

Optional Side Access Panels– Standard on FNE models

Larger Vent and Drain Connections– 3/8” Flare vent connection– ½” FPT drain connection

Optional Side Access Panel

FN Series has Solutions for Your Application Needs!

13

Unit Construction– High Temperature Motor

• 185F Air Over• FNH Models only

– Totally Enclosed Motors • FNH Models only

– Extended Legs • 30””, 36” or 42”

– Unit Frame• 20” or 42” leg

– Sealtite Wiring– Connection Options

• Threaded Conns• Flanged Conns

– Manifolds (double wide units)

FN Series has Solutions for Your Application Needs!

14

Unit Controls – Fan Cycling (on Lvg Fluid Temp)– Control Transformers (230V, 115V or 24V)– Motor Contactors (Individual and Paired)– Fuses or Circuit Breakers (Individual and Paired)– Motor On/Off Toggle Switches– Thru the door Disconnect (non fused and fused)– Custom Control Panels

FN Series has Solutions to Meet Your Initial Cost Needs!

15

High Performance 1140 RPM Fan Motors– Increased CFM / heat transfer per fan cell

½” Diameter Tube Coil Models– Compact efficient heat transfer surface

Aluminum Fin / Copper Tube Coil Construction

Optional High Density Fin Construction– 12 and 14 FPI Availability

Galvanized Steel Cabinet Construction

F = Fluid Cooler

Vintage N

Motor SelectionH = Standard (1140 RPM, 1½ HP)L = Low noise & energy efficient

(830 RPM, 1½ HP)Q = Quiet, extremely energy

efficient (540 RPM, .5 HP)E = Efficient, variable speed

brushless DC motors

F N H S 04 H 3 08Model Nomenclature

Model Nomenclature

F N H S 04 H 3 08

Total # of Fans 01 ‐ 12

Unit WidthS = Single WideD = Double Wide

Model Nomenclature

F N H S 04 H 3 08

Tube Diameter H = ½” F = 5/8”

Number of Rows2, 3 or 4

Coil Module #01 to 80

19

Product Overview – Model MapFan Config E, 1/2" E, 5/8" H, 1/2" H, 5/8" L, 1/2" L, 5/8" Q, 1/2" Q, 5/8"

1x1 FNE‐S01‐H361 — FNH‐S01‐H301 — FNL‐S01‐H321 — FNQ‐S01‐H341 —1x1 FNE‐S01‐H462 — FNH‐S01‐H402 — FNL‐S01‐H422 — FNQ‐S01‐H442 —1x2 FNE‐S02‐H263 — FNH‐S02‐H203 — FNL‐S02‐H223 — FNQ‐S02‐H243 —1x2 FNE‐S02‐H364 — FNH‐S02‐H304 — FNL‐S02‐H324 — FNQ‐S02‐H344 —1x2 FNE‐S02‐H465 — FNH‐S02‐H405 — FNL‐S02‐H425 — FNQ‐S02‐H445 —1x3 FNE‐S03‐H366 FNE‐S03‐F361 FNH‐S03‐H306 FNH‐S03‐F301 FNL‐S03‐H326 FNL‐S03‐F321 FNQ‐S03‐H346 FNQ‐S03‐F3411x3 FNE‐S03‐H467 FNE‐S03‐F462 FNH‐S03‐H407 FNH‐S03‐F402 FNL‐S03‐H427 FNL‐S03‐F422 FNQ‐S03‐H447 FNQ‐S03‐F4421x4 FNE‐S04‐H368 FNE‐S04‐F363 FNH‐S04‐H308 FNH‐S04‐F303 FNL‐S04‐H328 FNL‐S04‐F323 FNQ‐S04‐H348 FNQ‐S04‐F3431x4 FNE‐S04‐H469 FNE‐S04‐F464 FNH‐S04‐H409 FNH‐S04‐F404 FNL‐S04‐H429 FNL‐S04‐F424 FNQ‐S04‐H449 FNQ‐S04‐F4441x5 FNE‐S05‐H370 FNE‐S05‐F365 FNH‐S05‐H310 FNH‐S05‐F305 FNL‐S05‐H330 FNL‐S05‐F325 FNQ‐S05‐H350 FNQ‐S05‐F3451x5 FNE‐S05‐H471 FNE‐S05‐F466 FNH‐S05‐H411 FNH‐S05‐F406 FNL‐S05‐H431 FNL‐S05‐F426 FNQ‐S05‐H451 FNQ‐S05‐F4461x6 — FNE‐S06‐F367 — FNH‐S06‐F307 — FNL‐S06‐F327 — FNQ‐S06‐F3471x6 — FNE‐S06‐F468 — FNH‐S06‐F408 — FNL‐S06‐F428 — FNQ‐S06‐F4482x2 FNE‐D04‐H272 — FNH‐D04‐H212 — FNL‐D04‐H232 — FNQ‐D04‐H252 —2x2 FNE‐D04‐H373 — FNH‐D04‐H313 — FNL‐D04‐H333 — FNQ‐D04‐H353 —2x2 FNE‐D04‐H474 — FNH‐D04‐H414 — FNL‐D04‐H434 — FNQ‐D04‐H454 —2x3 FNE‐D06‐H375 FNE‐D06‐F371 FNH‐D06‐H315 FNH‐D06‐F311 FNL‐D06‐H335 FNL‐D06‐F331 FNQ‐D06‐H355 FNQ‐D06‐F3512x3 FNE‐D06‐H476 FNE‐D06‐F472 FNH‐D06‐H416 FNH‐D06‐F412 FNL‐D06‐H436 FNL‐D06‐F432 FNQ‐D06‐H456 FNQ‐D06‐F4522x4 FNE‐D08‐H377 FNE‐D08‐F373 FNH‐D08‐H317 FNH‐D08‐F313 FNL‐D08‐H337 FNL‐D08‐F333 FNQ‐D08‐H357 FNQ‐D08‐F3532x4 FNE‐D08‐H478 FNE‐D08‐F474 FNH‐D08‐H418 FNH‐D08‐F414 FNL‐D08‐H438 FNL‐D08‐F434 FNQ‐D08‐H458 FNQ‐D08‐F4542x5 FNE‐D10‐H379 FNE‐D10‐F375 FNH‐D10‐H319 FNH‐D10‐F315 FNL‐D10‐H339 FNL‐D10‐F335 FNQ‐D10‐H359 FNQ‐D10‐F3552x5 FNE‐D10‐H480 FNE‐D10‐F476 FNH‐D10‐H420 FNH‐D10‐F416 FNL‐D10‐H440 FNL‐D10‐F436 FNQ‐D10‐H460 FNQ‐D10‐F4562x6 — FNE‐D12‐F377 — FNH‐D12‐F317 — FNL‐D12‐F337 — FNQ‐D12‐F3572x6 — FNE‐D12‐F478 — FNH‐D12‐F418 — FNL‐D12‐F438 — FNQ‐D12‐F458

Sales Release: October 1st

BFH/RF6/HFS Last Order Estimated December 31st

Lead Times ½” Models: 3 to 4 weeks ex factory 5/8” Models: 4 to 6 weeks ex factory

Important Dates:

20

21

Model Cross ReferenceLARKIN

Single Wide UnitsCurrent Model New FN Model Notes

RF60339 FNH-S02-H203 Configure FNH with 14 FPI

RF60399 FNH-S02-H304



RF60597 FNH-S03-H306



RF60797 FNH-S04-H308





RF61205 FNH-S05-H411


RF61447 FNH-S06-F408 5/8" Model

RF61597 FNH-S06-F408 5/8" Model Configure FNH with 14 FPI

22

Model Cross ReferenceLARKIN

Double Wide UnitsCurrent Model New FN Model Notes

RF60678 FNH-D04-H212 Configure FNH with 14 FPI

RF60798 FNH-D04-H313




RF61196 FNH-D06-H315




RF61594 FNH-D08-H317





RF62410 FNH-D10-H420



RF62892 FNH-D12-F418 5/8" Model

RF63026 FNH-D12-F418 5/8" Model Configure FNH with 12 FPI

RF63194 FNH-D12-F418 5/8" Model Configure FNH with 14 FPI

ProSelect™ Product Selector – Opening Selection

23

Choose ‐1. Brand:

User Preference2. Category:

Fluid Coolers (not selectable on web‐version)

ProSelect™ Product Selector – Opening Selection

Choose ‐1. Brand:

User Preference2. Category:

Fluid Coolers (not selectable on web‐version)

3. Type: Large Sizes

4. Power:60 Hz (default)

5. OK: Click in lower right corner to proceed

ProSelect™ Product Selector – Selection Criteria

25

Choose/Enter ‐1. Style:

Previous Screen2. Data Sheet:

Brief Description3. Unit Quantity:

Number to handle load

4. Voltage: *Power Supply

5. FPI: * (new)8, 10, 12, or 14

6. Max Press Drop:in feet of water

* “No Preference” will increase time to process selections.


26

Choose/Enter ‐7. Max Length:

in inches8. Max Width:

in inches9. Max Height:

in inches10. Max Weight:

in pounds11. Family: *

FNH/L/Q/E

* “No Preference” will increase time to process selections.


27

Choose/Enter ‐12. % Glycol: (new)

0 to 50%13. Glycol Type:

(new) Ethylene or Propylene

14. Altitude:in feet

15. Ent Air Temp:50 to 190°F


28

Choose/Enter ‐16. Fluid Flow:

in GPM17. Ent Fluid Temp:

60 to 200°F18. Lvg. Fluid Temp.:

in °F*19. System Load:

in BTUH**

* If Lvg Fluid is entered, System Load is calculated.**If System Load is entered, Lvg Fluid is calculated.

ProSelect™ Product Selector – Equipment

29

Choose/Enter ‐1. Selection Range:

15 to 300%2. Refresh:

click to refresh3. Equip Window:

Scroll bars to see more selections

Click on model to select (shown at bottom)

Sound data new

ProSelect™ Product Selector – Options

30

Choose ‐1. Options:

Additional new options similar to NTC.

2. Coil: FPI and protection are combined. Bronz Glow tobe entered as Custom Option.

3. Fan Cycling: select contactor first for FNH, FNL and FNQ models

4. Rules: Options do have rules associated.

QUESTIONS

31

FN SERIES FLUID COOLER - heatcraftrpd.com21 Model Cross Reference LARKIN Single Wide Units Current...

Documents

Transcript of FN SERIES FLUID COOLER - heatcraftrpd.com21 Model Cross Reference LARKIN Single Wide Units Current...