Chapter 15A Chapter 15A -- Fluids at RestFluids at RestA PowerPoint Presentation byA PowerPoint Presentation by

Paul E. Tippens, Professor of PhysicsPaul E. Tippens, Professor of Physics

Southern Polytechnic State UniversitySouthern Polytechnic State University

2007

HOT AIR HOT AIR BALLOONS use BALLOONS use

heated air, which is heated air, which is less dense than the less dense than the surrounding air, to surrounding air, to create an upward create an upward

buoyant force. buoyant force. According to According to ArchiArchi--

medesmedes Principle, Principle, the buoyant force is the buoyant force is equal to the weight equal to the weight of the air displaced of the air displaced

by the balloon.by the balloon.

Fluids at RestFluids at Rest

Paul E. Tippens

Objectives: After completing this Objectives: After completing this module, you should be able to:module, you should be able to:

Define and apply the concepts of Define and apply the concepts of densitydensity and and fluid pressurefluid pressure to solve physical problems. to solve physical problems.

Define and apply concepts of Define and apply concepts of absoluteabsolute, , gaugegauge, , and and atmosphericatmospheric pressures.pressures.

State State PascalPascals laws law and apply for input and and apply for input and output pressuresoutput pressures..

State and apply State and apply ArchimedesArchimedes PrinciplePrinciple to solve to solve physical problems.physical problems.

Mass DensityMass Density

2 kg, 4000 cm3

Wood

177 cm345.2 kg

; mass mDensityvolume V

Lead: 11,300 kg/mLead: 11,300 kg/m33

Wood: 500 kg/mWood: 500 kg/m33

4000 cm3

Lead

Same volume

2 kgLead

Same mass

Example 1:Example 1: The density of steel is The density of steel is 7800 kg/m7800 kg/m33. . What is the volume of a What is the volume of a 44--kgkg block of steel?block of steel?

4 kg3

4 kg; 7800 kg/m

m mVV

V = 5.13 x 10-4 m3V = 5.13 x 10-4 m3

What is the mass if the volume is 0.046 m3?3 3(7800 kg/m )(0.046 m );m V

m = 359 kgm = 359 kg

Relative DensityRelative DensityThe relative density r of a material is the ratio of its density to the density of water (1000 kg/m3).

Steel (7800 kg/m3) r = 7.80Brass (8700 kg/m3) r = 8.70Wood (500 kg/m3) r = 0.500

Steel (7800 kg/m3) r = 7.80Brass (8700 kg/m3) r = 8.70Wood (500 kg/m3) r = 0.500

Examples:Examples:

31000 kg/mx

r

PressurePressurePressure is the ratio of a force F to the area A over which it is applied:

Pressure ; Force FPArea A

A = 2 cm2

1.5 kg

2

-4 2

(1.5 kg)(9.8 m/s )2 x 10 m

FPA

P = 73,500 N/m2P = 73,500 N/m2

The Unit of Pressure (Pascal):The Unit of Pressure (Pascal):A pressure of one pascal (1 Pa) is defined as a force of one newton (1 N) applied to an area of one square meter (1 m2).

21 Pa = 1 N/mPascal:

In the previous example the pressure was 73,500 N/m2. This should be expressed as:

P = 73,500 PaP = 73,500 Pa

Fluid PressureFluid PressureA liquid or gas cannot sustain a shearing stress - it is only restrained by a boundary. Thus, it will exert a force against and perpendicular to that boundary.

The force F exerted by a fluid on the walls of its container always acts perpendicular to the walls. Water flow

shows

F

Fluid PressureFluid PressureFluid exerts forces in many directions. Try to submerse a rubber ball in water to see that an upward force acts on the float.

Fluids exert pressure in all directions.

F

Pressure vs. Depth in FluidPressure vs. Depth in FluidPressure = force/area

; ; mgP m V V AhA

Vg AhgPA A

h

mgArea

Pressure at any point in a fluid is directly proportional to the density of the fluid and to the depth in the fluid. P = gh

Fluid Pressure:

Independence of Shape and Area.Independence of Shape and Area.

Water seeks its own level, indicating that fluid pressure is independent of area and shape of its container.

At any depth h below the surface of the water in any column, the pressure P is the same. The shape and area are not factors.

At any depth h below the surface of the water in any column, the pressure P is the same. The shape and area are not factors.

Properties of Fluid PressureProperties of Fluid Pressure

The forces exerted by a fluid on the walls of its container are always perpendicular.

The fluid pressure is directly proportional to the depth of the fluid and to its density.

At any particular depth, the fluid pressure is the same in all directions.

Fluid pressure is independent of the shape or area of its container.

The forces exerted by a fluid on the walls of The forces exerted by a fluid on the walls of its container are always perpendicular.its container are always perpendicular.

The fluid pressure is directly proportional to The fluid pressure is directly proportional to the depth of the fluid and to its density.the depth of the fluid and to its density.

At any particular depth, the fluid pressure is At any particular depth, the fluid pressure is the same in all directions.the same in all directions.

Fluid pressure is independent of the shape or Fluid pressure is independent of the shape or area of its container.area of its container.

Example 2. Example 2. A diver is located A diver is located 20 m20 m below below the surface of a lake (the surface of a lake (

= 1000 kg/m= 1000 kg/m33). ).

What is the pressure due to the water?What is the pressure due to the water?

h

= 1000 kg/m3

P = gh

The difference in pressure from the top of the lake to the diver is:

h = 20 m; g = 9.8 m/s2

3 2(1000 kg/m )(9.8 m/s )(20 m)P

P = 196 kPaP = 196 kPa

Atmospheric PressureAtmospheric Pressure

atm atm h

Mercury

P = 0One way to measure atmospheric pressure is to fill a test tube with mercury, then invert it into a bowl of mercury.

Density of Hg = 13,600 kg/m3

Patm = gh h = 0.760 mPatm = (13,600 kg/m3)(9.8 m/s2)(0.760 m)

Patm = 101,300 PaPatm = 101,300 Pa

Absolute PressureAbsolute Pressure

Absolute Pressure:Absolute Pressure: The sum of the pressure due to a fluid and the pressure due to atmosphere.

Gauge Pressure:Gauge Pressure: The difference between the absolute pressure and the pressure due to the atmosphere:

Absolute Pressure = Gauge Pressure + 1 atmAbsolute Pressure = Gauge Pressure + 1 atm

hP = 196 kPa

1 atm = 101.3 kPa

P = 196 kPa1 atm = 101.3 kPa

Pabs = 196 kPa + 101.3 kPa

Pabs = 297 kPaPabs = 297 kPa

PascalPascals Laws Law

Pascals Law: An external pressure applied to an enclosed fluid is transmitted uniformly throughout the volume of the liquid.

FoutFin AoutAinPressure in = Pressure outPressure in = Pressure out

in out

in out

F FA A

Example 3.Example 3. The smaller and larger pistons of The smaller and larger pistons of a hydraulic press have diameters of a hydraulic press have diameters of 4 cm4 cm and and 12 cm12 cm. What input force is required to . What input force is required to lift a lift a 4000 N4000 N weight with the output piston?weight with the output piston?

FoutFin Aoutt

Ain; in out out inin

in out out

F F F AFA A A

2

2

(4000 N)( )(2 cm)(6 cm)in

F

2; 2DR Area R

F = 444 NF = 444 N

Rin = 2 cm; R = 6 cm

ArchimedesArchimedes PrinciplePrinciple

An object that is completely or partially submerged in a fluid experiences an upward buoyant force equal to the weight of the fluid displaced.

2 lb

2 lbThe buoyant force is due

to the displaced fluid. The block material

doesnt matter.

Calculating Buoyant ForceCalculating Buoyant Force

FB = f gVfBuoyant Force:

h1

mg

Area

h2

FB

The buoyant force FB is due to the difference of pressure P between the top and bottom surfaces of the submerged block.

2 1 2 1; ( )B BFP P P F A P PA

2 1 2 1( ) ( )B f fF A P P A gh gh

2 1 2 1( ) ( ); ( )B f fF g A h h V A h h Vf is volume of fluid displaced.

Example 4:Example 4: A 2A 2--kg brass block is attached to kg brass block is attached to a string and submerged underwater. Find the a string and submerged underwater. Find the buoyant force and the tension in the rope.buoyant force and the tension in the rope.

All forces are balanced:

mg

FB = gVT

Force diagram

FB + T = mg FB = w gVw3

2 kg; 8700 kg/m

b bb b

b b

m mVV

Vb = Vw = 2.30 x 10-4 m3

Fb = (1000 kg/m3)(9.8 m/s2)(2.3 x 10-4 m3)

FB = 2.25 NFB = 2.25 N

Example 4 (Cont.):Example 4 (Cont.): A 2A 2--kg brass block is kg brass block is attached to a string and submerged underwater. attached to a string and submerged underwater. Now find the the tension in the rope.Now find the the tension in the rope.

mg

FB = gVT

Force diagram

FB + T = mg T = mg - FB

FB = 2.25 NFB = 2.25 N

T = (2 kg)(9.8 m/s2) - 2.25 N

T = 19.6 N - 2.25 N

T = 17.3 NT = 17.3 N

This force is sometimes referred to as the apparent weight.

Floating objects:Floating objects:When an object floats, partially submerged, the buoyant force exactly balances the weight of the object.

FB

mg

FB = f gVf mx g = x Vx gf gVf = x Vx g

f Vf = x Vx f Vf = x VxFloating Objects:

If Vf is volume of displaced water Vwd , the relative density of an object x is given by:

Relative Density:x wd

rw x

VV

Example 5:Example 5: A student floats in a salt lake A student floats in a salt lake with onewith one--third of his body above the surface. third of his body above the surface. If the density of his body is 970 kg/mIf the density of his body is 970 kg/m33, what , what is the density of the lake water?is the density of the lake water?

1/3

2/3

Assume the students volume is 3 m3.

Vs = 3 m3; Vwd = 2 m3; s = 970 kg/m3

w Vwd = s Vsw Vwd = s Vs3

w3

32 m ; 3 m 2

s wd s

w s

VV

3

w3 3(970 kg/m )

2 2s w = 1460 kg/m3w = 1460 kg/m3

Problem Solving StrategyProblem Solving Strategy1. Draw a figure. Identify givens and what is to be 1. Draw a figure. Identify givens and what is to be

found. Use consistent units for P, V, A, and found. Use consistent units for P, V, A, and ..2.2. Use absolute pressure Use absolute pressure PPabsabs unless problem unless problem

involves a difference of pressure involves a difference of pressure P.P.3.3. The difference in pressure The difference in pressure P is determined by P is determined by

the density and depth of the fluid:the density and depth of the fluid:

2 1m F; = ; P = V A

P P gh

Problem Strategy (Cont.)Problem Strategy (Cont.)

4. Archimedes Principle: A submerged or floating object experiences an buoyant force equal to the weight of the displaced fluid:

4.4. ArchimedesArchimedes Principle: A submerged or floating Principle: A submerged or floating object experiences an object experiences an buoyant forcebuoyant force equal to the equal to the weight of the displaced fluid: weight of the displaced fluid:

B f f fF m g gV 5. Remember: m, r and V refer to the displaced

fluid. The buoyant force has nothing to do with the mass or density of the object in the fluid. (If the object is completely submerged, then its volume is equal to that of the fluid displaced.)

Problem Strategy (Cont.)Problem Strategy (Cont.)

6. For a floating object, FB is equal to the weight of that object; i.e., the weight of the object is equal to the weight of the displaced fluid:

6.6. For a floating object, FFor a floating object, FBB is is equal to the weight of that equal to the weight of that object; i.e., the weight of the object; i.e., the weight of the object is equal to the weight object is equal to the weight of the displaced fluid: of the displaced fluid:

x or x f x f fm g m g V V

FB

mg

SummarySummary

; mass mDensityvolume V

31000 kg/mx

r

Pressure ; Force FPArea A

21 Pa = 1 N/mPascal:

P = ghFluid Pressure:

Summary (Cont.)Summary (Cont.)

FB = f gVfBuoyant Force:Buoyant Force:ArchimedesArchimedes

Principle:Principle:

in out

in out

F FA A

PascalPascals s Law:Law:

CONCLUSION: Chapter 15ACONCLUSION: Chapter 15A Fluids at RestFluids at Rest

Chapter 15A - Fluids at RestSlide Number 2Objectives: After completing this module, you should be able to:Mass DensityExample 1: The density of steel is 7800 kg/m3. What is the volume of a 4-kg block of steel?Relative DensityPressureThe Unit of Pressure (Pascal):Fluid PressureFluid PressurePressure vs. Depth in FluidIndependence of Shape and Area.Properties of Fluid PressureExample 2. A diver is located 20 m below the surface of a lake (r = 1000 kg/m3). What is the pressure due to the water?Atmospheric PressureAbsolute PressurePascals LawExample 3. The smaller and larger pistons of a hydraulic press have diameters of 4 cm and 12 cm. What input force is required to lift a 4000 N weight with the output piston?Archimedes PrincipleCalculating Buoyant ForceExample 4: A 2-kg brass block is attached to a string and submerged underwater. Find the buoyant force and the tension in the rope.Example 4 (Cont.): A 2-kg brass block is attached to a string and submerged underwater. Now find the the tension in the rope.Floating objects:Example 5: A student floats in a salt lake with one-third of his body above the surface. If the density of his body is 970 kg/m3, what is the density of the lake water?Problem Solving StrategyProblem Strategy (Cont.)Problem Strategy (Cont.)SummarySummary (Cont.)CONCLUSION: Chapter 15AFluids at Rest