FF Opening News-GB

GB FlexiForce OPENING NEWS, January 2012 www.flexiforce.com

OPENING NEWS

FlexiForce product range in door automation products and accessories

Picture of door, courtesy of L-Door Belgium (patented)

Dear Customer,

Now in front of you is the second issue of our OPENING NEWS! product overview. We are happy to present to you a full update with many new products and actual pricing (Q1-2012). FlexiForce is today recognized as an increasingly important channel for door automation products and accessories. Customers like our pre-selection of garage door openers and industrial door openers and accessories, all brought together in a compact and competitive range of products. We still simplify complexity, allowing you to combine your hardware supplies with good quality operators. One-stop-shopping that cannot be beaten by buying it all from separate suppliers. Your conditions, both on hardware and on operators improve when you grow your purchases in FlexiForce.

Main new topics:– Enhanced “force” family of powerful industrial drives.– Two new Liftmaster models LM80, LM50– Lots of new accessories– Improved pricing on safety items and wireless– LED decorative light bar

We feel our product line today is covering many needs. However, feel free to get in touch with me for products that you cannot find in this magazine.

Best regards,Marco FritzProduct ManagerDirect phone: [email protected]/marcofritz@fritzmarco

www.flexiforce.com 2

OPENING NEWS DEAR CUSTOMER

POWER FOR INDUSTRIAL DOORS 4

The information presented in this booklet is of course subject to change. We often expand our product range with new products. Introduction is done through our website, in our online catalogue, on our YOUTUBE channel FF-TV, on Facebook and in our Flickr-photostream. To stay tuned with these updates, visit our websites regularly, follow us on Twitter and “LIKE” us on www.facebook.com/flexiforce!

Content: 4 POWER FOR INDUSTRIAL DOORS – ‘force’ a family of 5 and force-accessories

– NICE-Mtec operators and accessories

9 POWER FOR GARAGE DOORS – Liftmaster garage door openers and drawbars

– Liftmaster accessories

– Hand transmitters

– Wireless controls

– Key switches

– Emergency disconnect

14 ELECTRICAL ACCESSORIES – GSM units

– Sensors and safety

– Wireless band solution

– Spiral cables and junction boxes

– Safety edge systems (opto, air, infrared)

– Motion detectors

– Lights curtains

– Pass door protection kits

– LED light bars

23 OTHER INFORMATION – QR-tags, CE, service, back-up, warranty

and personal training.

POWER FOR GARAGE DOORS

NEW! LED-LIGHT BARS

ELECTRICAL ACCESSORIES

9

22

14

3 follow us on

OPENING NEWS CONTENT

‘force’: a family of 5THE INTRODUCTION OF FORCE60BS, END OF 2009, MARKED THE LAUNCH OF A WHOLE NEW OPERATOR BRAND:

“FORCE”. NOW, WITH 5 OPERATORS RANGING FROM A 60NM DEADMAN TO A FULLY FLEDGED AUTOMATIC 140NM WE

CAN SAY THAT ANY SECTIONAL DOOR UP TO 600 KG DOOR WEIGHT SHOULD BE POWERED WITH OUR FORCE-LINE.

Single phase or triple phase, just hold-to-run control or remote controlled operators that can work for more sophisticated applications like for example a car wash station, all is possible! One thing is clear: all force operators are designed with 2 main points in mind:– Ease of installation and programming– Reliable and durable operation for many years

to come

For you as a door producer it is of the utmost importance that you do not need to worry about the quality of an operator. Design, product features and price are important but by far outweighed by easy installation and reliable performance. These two in combination with FlexiForce’s long standing reputation and high level logistics should at least provoke you to challenge us and place a trial order. If needed we will come and hand deliver the first units by our personal trainer in order to educate both your sales force and your installation team or even your customer! Join our increasing number of satisfied “force”-buying customers.

All force family members are included and approved in our CE-ITTR.

POWER FOR INDUSTRIAL DOORS


OPENING NEWS POWER FOR INDUSTRIAL DOORS

force90ACThe complete solution. 90Nm make it the ideal solution for doors up to 30m² (400kg). The very complete control unit allows you to use all types of safety edges, extra photocells, external receivers (although we supply a plug-in one), force sensing in both directions, programmable after runtime, half opening, built-in diagnostics, built-in cycle counter and a programmable service counter which is great for after sales purposes.

force140AC, force140AC-125Same control unit as force90AC but with a stronger gear motor for larger doors: 140Nm! For doors up to 40m² (600kg). We provide two versions: the force140AC for 1” shaft and force140AC-125 for 1 1/4” shaft. Always keep one in stock for the unexpected, with this unit you’re always prepared. After all, better be overpowered than being short of power!

5 follow us on


force60ACMotor and chassis are equal to the proven force60BS, 60Nm for doors up to 16 m² (400kg), but now with a basic control unit that allows you to connect a safety edge for (semi-)automatic functioning as well as to use it with pass doors. For your convenience we already integrated a receiver. Simply with additional transmitter F60AC-TX, you make the door remote controlled.

force60BSSimple but effective: mechanical limit switches, hold-to-run (deadman) control, 60 Nm for doors up to 16 m² (400 kg). Proven quality and efficient pricing for many industrial projects where no fancy control or advanced software programming is needed.

force60BS force60AC force90AC force140AC force140AC-125

Control dead-man automatic automatic automatic automatic

Power supply single 230V~/50Hz 3-phase: 3x230V/400V-50Hz

Torque Nm 60 60 90 140 140

Max. door size m² 16 16 24 40 40

Max. weight kg 400 400 400 600 600

Shaft “ 1” 1” 1” 1” 1 1/4”

Speed rpm 22 22 24 17 17

Operating temp. -20°C +55°C -20°C +55°C -20°C +55°C -20°C +55°C -20°C +55°C

Protection class IP54 IP64 IP65 IP65 IP65

Release quick release quick release chain release chain release chain release

Cable / chain m 5m/- 5m/- 7m/5m 7m/5m 7m/5m

List price € 399 € 449 € 556 € 649 € 649

Upgrading: ‘force’ Accessories

F60AC-TX3-channel transmitter for force60AC. Receiver already integrated in standard control. € 24,95

F90AC-linkfor connecting the extra chain to the existing chain. No tools needed because of smart and flexible connection system. € 0,30

TXR433A011-channel transmitter for the RSM434A03 plug-in receiver. € 32,90

OSE-IRSet of universal, stand-alone photocells that can be placed in the vertical door track. No interface needed. Works with all major operator brands. 2x15m wire fixed to it. Safety, easy installation and it can hardly be damaged. A small investment for a huge increase of safety! € 49,50

RSM434A03Make a remote controlled door by plugging in this receiver in the control box of force90AC, force140AC. Easy! Programs one or more TXR-transmitters (max. 85 memory registers). € 79,10

TXR433A044-channel transmitter for the RSM434A03 plug-in receiver. € 36,40

F90AC-chainStandard supply of chain is 5m. When force90AC or force140AC is installed higher above the floor this might not be enough. Solution: additional chain! € 2,30

F90AC-cableBoth force90AC and force140AC come standard with 7 meters of cable (between control unit and motor). In case of HL or VL systems this may not be enough. F90AC-cable is 11m and enables you to place the control unit farther away from the motor. € 45,31



Mtec industrial door openers selection

Door Release system

Max. m² Max. kg Chain Hand crank Quick release

24 m² 230 kg SWL07020EKEAKL

70Nm, 20rpm,

1x230V, 50Hz

with UST1KL control

€ 596,-

– SWL07020EERAKL

70Nm, 20rpm,

1x230V, 50Hz

with UST1KL control

€ 601,-

30 m² 420 kg SDL10024EKEAKL

100Nm, 24rpm,

3x230V/400V, 50Hz

with UST1KL control

€ 568,-

SDL10024EKUAKL

100Nm, 24rpm,

3x230V/400V, 50Hz

with UST1KL control

€ 543,-

SDL10024EERAKL

100Nm, 24rpm,

3x230V/400V, 50Hz

with UST1KL control

€ 576,-

40 m² 600 kg SDL14017EKEAKL

140Nm, 17rpm,

3x230V/400V, 50Hz

with UST1KL control

€ 721,-

SDL14017EKUAKL

140Nm, 17rpm,

3x230V/400V, 50Hz

with UST1KL control

€ 628,-

SDL14017EERAKL

140Nm, 17rpm,

3x230V/400V, 50Hz

with UST1KL control

€ 681,-

Nice-Mtec, industrial door openers

We do not want to limit you in choosing the operator that fits best to your application demands. Therefore, next to our complete “force” line of industrial door openers, we offer you the Nice-Mtec-line as solid alternative. You can easily select the unit you need from this overview

SDL-10024-EKE-AKL

SWL-07020-EER-AKL SDL-10024-EER-AKL

SWL-07020-EKE-AKL SDL-10024-EKU-AKL

7 follow us on


The pre-selected kits contain:– operator (3x230/400V, 1x230V, 50Hz) with: electronic limit switches and

release mechanism– control, push button box (UST1KL), ready for automatic control– 1” shaft opening– Pre-cabling, 5m cable (SDL10024 and SWL07020), 7m cable (SDL14017)– When chain release, standard 5m chain (height 2,5m)– CEE-plug with 1m power supply cable– 60% duty cycle 25% for SWL07020 single-phase operators– Installation manual– Mounting bracket

Control: UST1KL– This is the most advanced control, ready for all systems and for connection

with all accessories.– Automatic closing after preset time– Connection of optical, pneumatic or electrical safety edge– Plug-in receiver terminal– Integrated cycle counter ready (add additional K5 module)– 3 potential free contacts– LED indication and 7 segment display for diagnostics– Automatic bottom adjustment sensor ready (add module)

Upgrade: M-tec accessories

SDL-KMSE-9For extending the length of the standard supplied cable we offer this 9m of cable set. € 57,32

SDL-KMSE-13For extending the length of the standard supplied cable we offer this 13m of cable set. € 71,71

UST1-K5Add-on to the UST1KL control. Service module for installation and diagnostics, like service adjustments, automatic bottom adjustment, parameter editing, door-watchdog timing, testing. € 38,05

SDL-NB-HKEHand chain per meter. The standard chain provided with the operator is suitable for most applications (2x2,5m length). This hand chain offers extension of the chain length. € 2,-/m

SDL-NB-HKENGChain connection piece to connect the extra chain to the current one. € 1,34



From all our warehouses worldwide you can obtain Liftmaster Garage Door Openers and the relevant accessories. We offer a solution for every size and weight of residential sectional door in draw-bar and even jack-shaft type of units.Just like with the industrial door openers, also here lies your advantage in the one-stop-shop. Hardware and operators from one source, thus improving your buying conditions on both.

Unique with FlexiForce is the opportunity we offer by adding the door opener to your residential hardware sets ordered from us. This turns your costs from fixed to variable and ensures always the correct solution. It reduces your stock and with that your capital expenditures. A dream come true? Check out our full range on the following pages.

LM50K, opening price pointThis is a very cost-effective solution, opening our range of garage door openers. 500N. A complete garage door operator kit for residential doors up to 2300mm high and 3500mm wide. Complete with 4-piece C-rail, chain drive, 2 remote controls (LM50-TX) and 2 years warranty. Included in the FlexiForce CE-ITTR for doors up to 100kg. Integrated LED-lighting. One pallet contains 25 units for full discount. € 149,-

POWER FOR GARAGE DOORS

FLEXIFORCE AND LIFTMASTER: THE UNBEATABLE COMBINATION OF TWO MARKET LEADERS. AT FLEXIFORCE WE

BELIEVE IN FIRST CLASS PRODUCTS THAT COMBINE UNRIVALLED PERFORMANCE WITH FAIR PRICES AND GREAT

LOGISTICS. LIFTMASTER HAS PROVEN TO BE THE NUMBER ONE IN EXTREMELY RELIABLE OPERATORS. UNITS YOU CAN

INSTALL AND NEVER COME BACK TO.

9 follow us on

OPENING NEWS POWER FOR GARAGE DOORS

LM60KA complete, 600N garage door opener with 4-piece drawbar, chain drive, a 3-channel mini remote control (94335E), illuminated push button (wired) wall mount and all necessary installation material. Quick terminal connectors for: pass door switch, warning light, GSM modules. Memory for maximum 12 hand transmitters. Maximum recommended door surface 10.7m². Max. door height 2300 mm (higher doors: extension kit 7010CR3). One-box product. € 206,-

LM1000-2Top of the bill and state of the art! With 1000N the most featured garage door opener you can find. Choice between chain or belt drive. 64 memory registers, automatic closing, adjustable integrated light, wireless push button, C-rail support bracket. Used for larger garage doors and collective garages. The already large (64 places) standard memory can be enlarged by adding a 8002E universal transmitter (for 30 extra memories). Standard supplied with two pieces of 4-channel transmitters. € 289,-

LM60R-128An upgrade of the LM60K version: 600N, complete kit with 4-piece drawbar, belt-drive for quiet operation, one 3-channel mini remote control, a 2-channel wireless push button and installation material. Quick terminal connectors for: pass door switch, warning light, GSM modules. Memory for maximum 12 hand transmitters. Max. recommended door surface 10.7m². Max. door height 2300 mm (higher doors: use extension kit 8010CR3). One-box product. € 233,-

LM80R-128, LM80R-128HHighly equipped garage door opener kit. 800N. Comes in two versions: with 1-piece rail or with 4-piece (LM80R-128H) knock-down C-rail. Always with belt drive. Both versions include two pieces 3-channel mini remote controls and a wireless, 2-channel push button. Quick terminal connectors for: pass door switch, warning light, GSM modules. 12 memory registers for transmitters. Good for doors up to 13,5m². Two-carton product. € 254,60

LM60R-128



The alternative solution: LM3800Almost a hybrid that can be applied on both residential doors where there is no room for a draw-bar or on light normal lift industrial doors. This unit can be mounted on either left or right hand side of the door (200mm side room and 50mm shaft length). Maximum drum diameter is 6”. Suitable for doors up to 200 kg. Complete with 2 94335E remote controls and electrical slide bolt lock.

NEW! LM3800 in combination with our SafeStep low threshold profile 1041L has passed all CE peak force tests. So apply without additional safety edge system!

€ 357,72

Drawbars: Your choiceOn the LM1000A-2 the draw-bar is not included. You can choose between chain drive or belt drive, 1-piece or 4-piece and different door heights as well as separate extension kits:

Select the chain driven draw-bar for efficient pricing reasons:

7023CR3 C-rail, chain, h < 2,30m, 1-pc € 67,507025CR3 C-rail, chain, h < 2,50m, 1-pc € 76,-7030CR3 C-rail, chain, h < 3,00m, 1-pc € 84,-7423CR3 C-rail, chain, h < 2,30m, 4-pc € 63,507010CR3 extension set 1m for h>3m € 29,90

Select the belt driven draw-bar for high-quality, low-noise operation and maintenance-free lifespan:8023CR3 C-rail, belt, h<2,30m, 1-pc € 96,-8025CR3 C-rail, belt, h<2,50m, 1-pc € 104,-8030CR3 C-rail, belt, h<3,00m, 1-pc € 114,-8423CR3 C-rail, belt, h<2,30m, 4-pc € 92,508010CR3 extension set 1m for h>3m € 71,-

312RMCentral shaft suspension with integrated draw-bar connection (not for LM50K). € 1,96

2635A very easy bracket system to connect the operator draw-bar to the connection profile (SU or ..) of the horizontal tracks. Thus preventing the need to connect and fix to ceiling or building construction. € 2,28

012B0950A click-and-turn system to fix the drawbar to the ceiling. Provides more flexibility in mounting garage door opener and saves installation time. € 4,60

Drawbar installation:

11 follow us on


Liftmaster Accessories

LM50TXAdditional hand transmitter for LM50K. 2 channel, with key-ring. € 39,90

94334EA nice 4-channel mini transmitter providing an extra channel to control even more devices. Supplied with a wall mount bracket. 433.92MHz, rolling code. € 34,00

LM8002E+801221This is a 2-channel receiver. It must be combined with RF module 801221 which determines the frequency of 433.92Mhz. Handles both rolling and billion code, but not at the same time. € 36,00 + € 14,44

94330EThe standard 1-channel remote control with visor clip that normally always stays in the car. 433.92MHz, rolling code. € 27,50

94335EThe mini hand transmitter that usually is provided in the carton.3-channels, for example for more than one door, or a gate or garden light or… in combination with our 8002E receiver. Supplied with a ring to attach to your keychain. 433.92MHz, rolling code. € 31,00

4335EThe 3-channel mini transmitter with billion code. This transmitter has for many years been the best selling Liftmaster hand set. The installed base of operators with this transmitter is huge and therefore this is still a hot selling service item. Always keep one in your service truck to help out the customer! € 32,60

Hand transmitters



9747EWireless keypad, 433.92 MHz, rolling code. Up to 10.000 numerical combinations possible. Codes can be erased after use (in case you want just a service opening) or be personalized to keep control over who is entering. € 37,20

100034A heavy-duty, sturdy 2-channel key switch. Turn left for one function and turn right for the other function. Flush mount. Wired. Dimensions: 75x75mm. Ø60mm. 51 mm deep. IP54, 3 keys. € 49,00

1702EIf the garage door is your only entrance to the garage and the power is out or the remote control is lost, this emergency release kit grants you access to the garage without having to demolish the garage door. This lock comes with 2 keys and is universal on most brands of garage door openers. Small investment but if required, a huge return! € 13,50

128LMWall mount 2-channel push button for use inside the garage or in house, provided that the distance to garage or gate operator is not too big. 433.92MHz, rolling code. € 29,00

379EAdvanced fingerprint scanner, wireless 433.92MHz. Can also be used in combination with the 8002E receiver to adjust it to other operator brands or different devices. It holds up to 10 different finger prints, although we always recommend to scan 2 fingers of each user. Users can only be added or deleted with the help of a master key, usually the home owner’s finger print. € 109,00

100041Another heavy-duty, sturdy 2-channel key switch. Turn left for one function and turn right for the other function. Surface mount. Wired. Dimensions: 75x75x50mm. IP54, 3 keys. € 49,00

Wireless controls

Key switches

Outside disconnect

13 follow us on


In the everlasting quest for more comfort, enhanced safety and increasing ease of use, our GSM module offers some great benefits:– The door, gate, barrier or any other device can be controlled from

anywhere in the world, without the need to be on site to open/close the door.

– The system replaces all the remote controls that can be in circulation. Big savings in time of programming and in the loss of transmitters.

– Calls to the system are free of charge.– Provides advanced access control possibilities: It allows to see who

entered, at what time, who is allowed to enter and leave, etc. Privacy and keeping unwanted guests out.

How does it work?Basically the GSM unit is a switch. This switch is connected to a SIM card (prepaid or postpaid) which is activated when it receives a phone call. It will only work when the number that is calling it is pre-registered. The switch then gives an output signal that opens or closes the door.

ELECTRICAL ACCESSORIESGSM: Opening doors is only one phone call away

GSM-02A high-tech type GSM door-opener module. Excluding SIM-card. Memory for 2000 numbers of which 400 can have special limitations. Programming and registering numbers is done by text message or by optional software CD (GSM02SW) € 345,-

GSM-02SWProgramming software for the GSM-02, allowing a faster and easier option for programming GSM-02 via a computer (with integrated modem), instead via text messaging. For locations with many, often changing, users. € 69,-


OPENING NEWS ELECTRICAL ACCESSORIES

OSE-WL-KITThe complete kit meaning: a receiver and a transmitter. One receiver can handle 8 transmitters, in case you need more than just the bottom edge of the door to be protected. Including batteries and seals. IP55. € 125,-

OSE-WL-TXExtra transmitter which can be useful in case more than one edge needs protection, for example with sliding gates or folding doors. Supplied including batteries. € 82,50

Wireless Future!Instead of using a spiral cable to transfer the signal from the safety edge to the control box, this can also be transferred by “wireless” radio signal. This is what OSE-WL-KIT does. A transmitter is installed on the door and a receiver next to the control box. The moment the safety edge (optical or air) makes contact the transmitter is activated and sends the signal. The system is self-testing and (if the operator allows it) has a sleep function for prolonged battery life. Two channels: one for safety edge and an extra one for a pass door or other selected stopping contact. With normal use battery life is approximately 2 years. The system has two alternate frequencies for use with several doors next to each other.

15 follow us on


Spiral cables

OSE-1113704WWhite spiral cable, 5 core, length of 750mm with factor 4 and two straight ends of 200mm. € 17,-

OSE-SCB1Guiding bracket for the spiral cable. Installed on the vertical angle, it prevents the cable from being grabbed by the passing door. € 3,97

OSE-LAD1A good looking, compact, residential connection box for any cable connection on the door panel. Grey colour. Connection for 3-core wire. € 8,65

OSE-LAD4-45Same function as OSE-LAD2 but bigger dimensions (more space) and slightly better design in grey and the 45 degrees angle allows better cable protection during door operation. € 19,95

OSE-1113926Black spiral cable, 5 core, length of 1000mm with factor 4 and straight ends 1000mm and 1500mm. € 19,03

OSE-1113926WWhite spiral cable, 5 core, length of 1000mm with factor 4 and straight ends 1000mm and 1500mm. € 19,03

OSE-1113704Black spiral cable, 5 core, length of 750mm with factor 4 and two straight ends of 200mm. € 13,95

OSE-LAD2An industrial junction box for 4 or 5 core coil wire. Safety edge and spiral cable connection, installation on the door leaf. Grey. € 15,91

To complete your installation we offer you a wide range of black and white spiral cables with additional brackets and junction boxes.



Safety edge = User safety

OSE-Signal-LPNew set of Low Power opto-sensors, compatible with any kind of operator control. Max door width is 12m. The diameter of the sensors is 12mm, which makes them fit in FlexiForce bottom seal 1039-52. LED signalling included. € 34,95

DWGK11Airwave switch, mounted in IP54 housing. The switch is activated by the rise or fall in air pressure in the bottom seal of a door when meeting an obstacle. € 32,-

OSE-KIT-BS, Safety edge accessory kitFlexiForce reduces your stock value by offering you smartly selected kits. Like we have been doing for some time now with residential and industrial kits for pass door protection we also prepared a generic kit. Whether you prefer pneumatic or optical safety, this kit is always useful. Long spiral cable (OSE-1113926), junction box (OSE-LAD2) and spiral cable bracket (OSE-SCB1), all in one bag. Just put a couple in every service truck and you’re always prepared. € 37,-

OSE-MAS1A bumper that protects the safety edge system when the door section meets the ground. Effective height 29mm. € 2,23

OSE-MAS-ETo increase the effective height of the OSE-MAS1. Height is 6mm. Multiple blocks can be used to reach the required height. € 0,23

A door that automatically closes needs to be stopped when it hits an obstacle or person. To obtain this safety, there are different safety edge systems for industrial doors available in the market. – Opto-sensor system– Pneumatic safety system– Photocell (IR) safetyThe choice between these systems is often done on personal experience arguments. FlexiForce offers solutions for all, in combination with a full range of bottom seals.

17 follow us on


DWACCMaking the connection between the pneumatic switch (DGWK11) and the bottom rubber seal (1035etc). Set consists of brass tule (25cm) a silicon hose and two rubber plugs. € 6,40

100263A universal, relay controlled, set of photocells that works with all major brands industrial door drives as well as gate operators. Complete kit for max reach of 12 meter. € 42,90

OSE-A-0002 Adaptor sleeve from 22 to 12mm. To adapt the chamber in the bottom rubber from 22 to 12mm for the opto sensor. € 2,45

770EFor Liftmaster operators only, a set of Infra-Red beam photocells. Complete kit. € 34,90

OSE-IRPair of self-contained photocells that can be installed into the vertical track of the door. Self-contained means no additional electronics or interface required. This is integrated in the photo-cell. You must have an operator that is programmable on recognizing the passing door leaf by the IR sensors. Supplied with 15 meter cable. Diameter of the sensors is 12mm so just drill a hole in the track (aligning!) and... job done! € 49,50



ReglobeamInstead of going up and down the ladder all the time, the Reglobeam allows for programming from the floor. A very handy tool that every installer should have in his toolbox or car. With the red LED indicator commands are clearly confirmed.

Also some default factory settings can easily be put in force. Saving the installer a lot of time (these are the so called comfort settings) A special table is included in the Herkules2 installation manual to help you making your life easier, exactly our goal! Batteries are included.

€ 49,00

The Herkules2The Herkules2 motion detector from Bircher Reglomat is the ultimate multi-purpose radar sensor. Well known in the market, available from FlexiForce at a very competitive price and easy logistics.The Herkules2 gives a signal to the door operator when you want to open (or close) it. It detects whether traffic approaches or distances itself from the door. Due to its quick reacting time this is the ideal product for hi-speed doors. However, due to its numerous setting parameters the Herkules2 can be applied in many situations.

Features:– Max. installation height 7 meters– Direction recognition– Cross traffic masking– Quick reaction time (programmable)– IP65– Operating temperature: -30°C to +60°C– Operating voltage: 12 – 28 VAC, 12-36 VDC

€ 189,-

Motion detection: Herkules2

19 follow us on


A light curtain is a profile containing IR diodes at each 46mm which are placed on both sides of the door opening to form a light grid that covers the whole of that same opening. We carry two lengths. Both equipped with the so called sequential blanking function meaning that the operator will not be triggered to stop by the door leaf that interrupts the light beams.

SG14 light curtains recognize soft-start and soft-stop cycles in the operator and have a switching contact meaning both NO and NC outputs can be realized.

Feature: SG14-2000 SG14-2800

€ 379,50 € 460,-

Supply voltage 12 – 36 V dc 12 – 36 V dc

Nr. of channels 40 56

Active height 1800 mm 2535 mm

Response time 37 ms 49 ms

Max./min. sequentialblanking speed

1,6/0,05 ms 1,6/0,05 ms

Min. size of blanking object 55 mm. 55 mm.

Dimensions 10x28 mm 10x28 mm

Housing material Aluminium Aluminium

Lens material PMMA PMMA

Connection 5m. cable 5m. cable

Oper. temperature -20 +65 °C -20 +65 °C

Sealing class IP54 IP54

Range 1 – 10 m 1 – 10 m

Light curtains:SG14-2000, SG14-2800



SG light curtain

Pass door protection 16200LMA mechanical pass door switch. Especially destined for existing doors that are automated. Also applicable on slide bolts/latches (see picture). Can be used as normally open or normally closed contact. € 15,30

OSE-PDSK-RESPass door protection for residential doors in a complete kit. For aesthetical reasons we added a white cable that better matches the inside of most sectional garage doors. Carton content: short spiral cable, white (OSE-1113704W), 2x junction boxes (OSE-LAD1), guiding bracket (OSE-SCB1), 5 meters of 2-vain bell wire and the switch itself (OSE-MPDS). € 51,40

OSE-MPDSThe invisible solution! For newly built doors, this is the best solution to protect a pass door. Just fix one magnet in the pass door leaf and the other side straight opposite in the ‘overall’ door making sure the distance between the two is not more than 19 mm. Comes with 4 meters of wire. € 9,75

OSE-PDSK-INDPass door protection for industrial doors in a complete kit. Saves you ordering time, hassle and discontinuity of supply. All you need is in the box including manual describing how to connect to most commonly used operators. Carton content: long spiral cable, black (OSE-1113926), junction box (OSE-LAD2), guiding bracket (OSE-SCB1) and the switch itself (OSE-MPDS). € 55,30

When you have a pass door installed the motor should not start pulling the door while the pass door is not fully closed. Clearly that will cause a lot of damage which is expensive to fix. Therefore a small investment in a pass door switch protects your door. We offer different kinds:

21 follow us on


“Shining a light” on a garage door in the dark of evening and night, may serve different goals:– the home-owner is proud of house and garage

door and expresses that by spreading light over it, purely decorative and increasing curb appeal!

– a light beam on top of the door helps people in finding their way in the dark of night. Orientation.

– it is commonly known that burglars don’t like working in the light. So, burglar safety. And security!

Whatever the main driver is, fact is that with the FlexiForce LED-bars, we offer another ideal up-sell in residential projects.

We start our range with four types, in length 5000mm and 3000mm, in aluminum and white (RAL9010) finish, all with warm-white LED light. FlexiForce LED-bars are made of high quality Alunox and contain LEDs from the best LED suppliers. The lifespan is 40.000 hours, with over 100lumes per LED. Easy installation, cut-to-size adjustments possible. Other colors and finishes on request available. Your electrician can easily make circuits that allow switching the light with the garage door opener, or installing a light-dimming function or dark/light sensors etc. Of course also to be applied in other parts of houses or industrial buildings. It is all up to you!

New!LED light bars

LED3000-WALL=3000mm, Alu, 4 LEDs

€ 249,50

LED5000-WALL=5000mm, Alu, 8 LEDs

€ 459,-

LED3000-W10L=3000mm, white, 4 LEDs

€ 292,-

LED5000-W10L=5000mm, white, 8 LEDs

€ 459,-



Model: Pallet quantity:

LM50K 25

LM60K/LM60R-128 30

LM80R-128/LM80R-128H 48 (excl. drawbars)

LM1000A 40 (excl. drawbars)

force60BS/force60AC 12

force90AC 30

force140AC 12

SWL07020 24

SDL10024/14017 24

QR-tagsIn our INFO magazines we introduced Quick-Reading tags to you. In this magazine and also on more and more FlexiForce products and packaging you will find these tags. They are quickly and easily read by your mobile phone (install QR-reader) leading you to relevant online-information like manuals, movies or pictures. A movie or manual often explains quickly what you need to learn. Try it!

CE-regulations on operatorsEverybody in the door industry is aware of the high costs involved in CE testing and complying to CE regulations and standards. FlexiForce delivers you a very cost effective solution by sharing our Initial Type Testing Reports (ITTR) with you. We keep on testing our hardware with our line of operators and all major panel brands (a still increasing number). We share the burden without obligations for you and without duplicating cost to the market. So, don’t worry when switching from your current operator supplier to FlexiForce. All has been taken care of. If anything changes or if the operator manufacturer introduces an update, FlexiForce updates the changes in the ITTR and with that, secures your CE-approval. More information on www.flexiforce.com/downloads/CE.

To the movies:FF-TV on YouTube

Installation videos, product introduction and applications of operators and electrical accessories are online for you on our FF-TV channel on YouTube. Updated regularly with new movies.

Think efficient: Buy a pallet!

Technical back-up, personal training, after sales and warrantyOf course we realize that our line of operators and accessories have to be backed-up with solid know-how around the product and excellent after-sales services to our customers. It starts with our confidence in the selected product offering, which we express by honouring you up to 5 year warranty.

But there is more: – Training, both on technical and commercial sides of the products. Options:– Training by experts, done in-house your company– Training by experts, done in one of the FlexiForce facilities– Training by experts, done in Mtec or Liftmaster in Germany– Timely spare parts deliveries to minimize your logistic cost (FlexiForce 24 hour

Xpress service)– Sample service from FlexiForce warehouses close to you– Service desks, available by phone, fax and email to answer any question you

might have. They can solve 99% of installation problems immediately.– Installation and service manuals in many languages, online in our downloads.– Pictures and movies on FF-TV (You-Tube), www.flickr.com and Facebook.

OTHER INFORMATION

23 follow us on

OPENING NEWS OTHER INFORMATION

Our range of operators provides you with an unbeatable combination: Product Power and Logistic One-Stop-Shop Efficiency.

Challenge us for clarifying this to you in detail.

You will win!

I: www.flexiforce.com

E: [email protected]

FF Opening News-GB

Documents

Transcript of FF Opening News-GB