ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 · 2012. 5. 16. · Product Lineup DX80 S2 and DX90...
Transcript of ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 · 2012. 5. 16. · Product Lineup DX80 S2 and DX90...
ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2
Product Introduction
Product Introduction ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu, Release April 2012 0
Content
Product Lineup High Performance Expandability Operability Reliability System Modules and Components
Product Introduction ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu, Release April 2012 1
Product Lineup
New Product Features Product Lineup Design Policy - Appearance Comparison with Existing DX Entry Models ETERNUS DX Specification Overview
Product Introduction ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu, Release April 2012 2
New Product Features Major new / enhanced functions High performance
• High-end CPU Enhanced scalability
• Increased number of drives, number of host ports, cache capacity • Support for 10 Gbit/s iSCSI and 10 Gbit/s FCoE as host interface • Support for 2.5"/3.5" drives with dual ported 6 Gbit/s SAS 2.0 interface
Operability • Same GUI for DX80 S2, DX90 S2, DX410 S2 and DX440 S2
Reliability • Cache data saved to a non-volatile memory at the time of power failure
• New feature for the DX400 models • Enhanced remote copy functionality
• Remote copy between different models Security
• Role based management authority Green environmental aspects
Product Introduction ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu, Release April 2012 3
Product Lineup DX80 S2 and DX90 S2 Provides optimal storage environments for customer scales
and usage scenarios, such as Research and development Other uses in various departments from small, medium to large
companies
2.5" Enclosure 3.5" Enclosure 2.5" Enclosure
3.5" Enclosure
ETERNUS DX80 S2 ETERNUS DX90 S2 DX80 S2 DX90 S2 Remarks
CPU Xeon 1.73 GHz Xeon 1.73 GHz
No. of drives 120 240 Using 2.5" disks
Max. physical capacity of disk capacity
SAS 72 TB 144 TB Using 2.5" SAS 600 GB disks
Nearline SAS
240 TB 240 TB Using 3.5" Nearline SAS 2 TB disks
Max. cache capacity 4 GB 8 GB
Host interface (max. 8 ports per ETERNUS DX)
FC 2/4/8G and FCoE 10G iSCSI 1G and iSCSI 10G SAS 3/6G
FC 2/4/8G and FCoE 10G iSCSI 1G and iSCSI 10G SAS 3/6G
Product Introduction ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu, Release April 2012 4
Product Lineup DX410 S2 and DX440 S2 Provides optimal storage environments for customer scales
and usage scenes Cost effective Midrange systems provide Enterprise class
storage
ETERNUS DX410 S2 ETERNUS DX440 S2
2.5" Enclosure 3.5" Enclosure 2.5" Enclosure 3.5" Enclosure
DX410 S2 DX440 S2 Remarks
Maximum drive number 480 960 Using 2.5” drives
Maximum storage capacity (Physical)
SAS 288 TB 576 TB Using 3.5” SAS 600 GB drives
Nearline SAS 480 TB 960 TB Using 3.5” Nearline SAS 2 TB drives
Maximum cache capacity 16 GB 96 GB
Host interfaces (max. port number per ETERNUS DX system)
FC 2/4/8G (16 port) FCoE 10G (8 port) iSCSI 1/10G (8 port)
FC 2/4/8G (32 port) FCoE 10G (16 port) iSCSI 1/10G (16 port)
Minimum configuration size 5U (CE 3U, DE 2U) 5U (CE 3U, DE 2U) Controller Enclosure, Drive Enclosure
Product Introduction ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu, Release April 2012 5
Design Policy - Appearance Uniform design concept of the Fujitsu brand Matched design when multiple drives are installed in the same rack
• Brand expression and coloring design identity Green touch points on maintenance units - Easy to install/remove
• Simple design emphasizes reliability and functionality LED indicator for failed part
• Able to recognize a failed part at a glance
PRIMERGY
DX80/90 S2 (2.5" HDD)
DX80/90 S2 (3.5" HDD)
ETERNUS
Product Introduction ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu, Release April 2012 6
DX Entry Model Comparison
DX90
DX80
DX60
DX90 S2
DX80 S2
DX60
Number of ports: up to 8 Cache: 8 GB Number of drives: 240 New function: Thin Provisioning
Number of ports: 8 Cache: 4 GB Number of drives: 120
Number of ports: 4 Cache: 4 GB Number of drives: 120
Number of ports: 4 Cache: 2 GB Number of drives: 24
Number of ports: up to 8 Cache: 4 GB Number of drives: 120 New function: Thin Provisioning
Perf
orm
ance
, fun
ctio
n, n
umbe
r of d
rives
Product Introduction ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu, Release April 2012 7
DX Midrange Model Comparison
DX440
DX410
DX440 S2
DX410 S2
Number of ports: 16 Cache: 32 GB Number of drives: 420
Number of ports: 12 Cache: 8 GB Number of drives: 210
Number of ports: 32 Cache: 96 GB Number of drives: 960
Number of ports: 16 Cache: 16 GB Number of drives: 480
Product Introduction ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu, Release April 2012
Perf
orm
ance
, fun
ctio
n, n
umbe
r of d
rives
8
ETERNUS DX Specification Overview (1) ETERNUS DX80/DX90 vs. DX80 S2/DX90 S2
DX80 S2 DX90 S2 DX80/DX90
Number of controllers 1/2 1/2
CPU frequency Xeon Single Core 1.73 GHz 1.2 GHz
Cache memory (max. total capacity) 2/4 GB 4/8 GB 2/4 GB
Backup method of cache data Write back to NAND Flash Write back to NAND Flash
Cache retention time No limitation (SCU) No limitation (SCU)
Host interface
FC 8 Gbps,4 Gbps 8 Gbps,4 Gbps
FCoE 10 Gbps -
iSCSI 1 Gbps, 10 Gbps 1 Gbps
SAS 3 Gbps, 6 Gbps 3 Gbps
Number of host ports per CM 2 or 4 2 or 4 FC : 2/4 (FC 8 Gbps only) iSCSI / SAS : 1/2
Drive Interface between enclosure SAS 2.0, 6 Gbps SAS 1.0, 3 Gbps
RAID level 0,1,1+0,5,6,5+0 0,1,1+0,5,6,5+0
Number of Drive Enclosures 3.5" CE: 0-9 2.5" CE: 0-4
3.5" CE: 0-9 2.5" CE: 0-4
3.5" CE:0-9 2.5" CE:0-4
Number of HDD HDD/Enclosure
3.5" 120 (12 HDD/2U) 120 (12 HDD/2U) 120 (12 HDD/2U)
2.5" 120 (24 HDD/2U) 240 (24 HDD/2U) 120 (24 HDD/2U)
Maximum number of LUN 2048 4096 1024
Maximum number of HBA 1024 (256/port) 128 (32/port), 256 (32/port)
Product Introduction ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu, Release April 2012 9
ETERNUS DX Specification Overview (2)
DX410 S2 DX440 S2 DX410 DX440
200 VAC 200 VAC 100 VAC 200 VAC 100 VAC 200 VAC
Number of controllers 2 2
CPU frequency (number of cores) 2.27 GHz (Dual core) 2.53 GHz (Quad core) 2.33 GHz (Dual core) 2.83 GHz (Quad core)
Cache memory capacity (max total) 16 GB 96 GB 8 GB 32 GB
Cache data backup method Write back to internal SSD Write back to system disk
Cache maintain time No limitation No limitation
Host interface
FC 8 Gbps, 4 Gbps 8 Gbps, 4 Gbps
FCoE 10 Gbps -
iSCSI 1 Gbps, 10 Gbps 1 Gbps
Number of host ports/CM
FC 4, 8, 12 or 16 4, 8, 12, 16, 20, 24, 28 or 32 2, 4 or 8 4, 8, 12 or 16
FCoE 4 or 8 4, 8, 12 or 16 - -
iSCSI 4 or 8 4, 8, 12 or 16 2 or 4 4 or 8
Drive Interface SAS 6 Gbps FC 4 Gbps
RAID levels 0,1,1+0,5,6,5+0 0,1,1+0,5,6
Number of DE 1-20 1-40 2/4 2-14 2/4 2-28
Maximum number of HDD 3.5" 240 480 60 210 60 420
2.5" 480 960 - -
Number of HDD/enclosure 3.5" 12 HDD/2U 15 HDD/3U
2.5" 24 HDD/2U -
Maximum number of LUN 16384 2048 4096
Maximum number of HBA 1024 (256/port) 256 (32/port)
Product Introduction ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu, Release April 2012 10
High Performance
High Throughput Performance High-end CPU
Product Introduction ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu, Release April 2012 11
High Throughput Performance Enhanced internal bus and cache performance Internal CM communication is running via PCI Express x4 Generation 2 The enclosure backend configuration uses SAS 2.0 for HDD interface The Cache Memory uses the latest DDR3 DIMMs Very effective for sequential access to file servers, etc.
CA: Channel Adapter IOC: I/O Controller EXP: SAS Expander
DDR3 DIMM
PCI Express Gen2
SAS 2.0
CA
CPU Memory
IOC
PSU
CA
EXP
CM#1 CM#0
5 Gbit/s
6 Gbit/s
DX80/90: 866 MHz DX400: 1,066 GHz
* Throughput, compared to earlier models
12 Product Introduction ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu, Release April 2012
DX440
DX440 S2
70%* faster DX80
DX80 S2
15%* faster
12
High-end CPU High-end CPU achieves high IOPS performance DX80 S2 and DX90 S2: 1x1.73 GHz Xeon DX410 S2: 1x2.27 GHz Xeon, 2 core, 2 threads DX440 S2: 1x2.53 GHz Xeon, 4 core, 8 threads
IOP
S
DX80 DX80 S2
40% faster*
CPU Memory
IOC
CM#1 CM#0
PSU
CA (Channel Adapter) IOC (I/O Controller) EXP (SAS Expander)
EXP
CA CA
* I/O per second, compared to earlier models IO
PS
DX400 DX400 S2
120% - 140% faster*
Product Introduction ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu, Release April 2012 13
Expandability
Improved Scalability Field Upgrade Improved Interface Flexibility Expansion of Host Interface DX410 S2 / DX440 S2 Memory SSD Configuration Rules
Product Introduction ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu, Release April 2012 14
Improved Scalability (1) The maximal drive and/or Enclosure count depends on which
drive type is used Mixed usage also possible
DX90 S2 configuration No. of CEs/DEs 1 - 10 (2.5"/3.5") No. of drives 2 - 240 (2.5") 2 - 120 (3.5")
DX80 S2 configuration No. of CEs/DEs 1 - 10 (3.5") 1 - 5 (2.5") No. of drives 2 - 120 (2.5"/3.5")
Basic configuration: CE only
Max. configuration: CE + 9 DE
Scale up flexibly to match changes in
operating environment
CE: Controller Enclosure DE: Drive Enclosure
Product Introduction ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu, Release April 2012 15
Improved Scalability (2) Start with a small configuration, with 1 DE only DX400 S2 is able to scale up to the data center dimension
Scale up flexibly to match changes in
operating environment
CE: Controller Enclosure DE: Drive Enclosure
Basic configuration: 1 CE + 1 DE
Maximum configuration: 1 CE + 40 DE
DX440 S2 configuration No. of DEs 1 - 40 No. of drives 2 - 960 (2.5") Cache 16 - 96 GB
DX410 S2 configuration No. of DEs 1 - 20 No. of drives 2 - 480 (2.5") Cache 4 - 16 GB
Product Introduction ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu, Release April 2012 16
Field Upgrade Possible to upgrade with maintaining user data It is not possible to upgrade from ETERNUS DX60/DX80/DX90
or earlier models
ETERNUS DX80 S2
ETERNUS DX90 S2
ETERNUS DX410 S2
ETERNUS DX440 S2
Product Introduction ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu, Release April 2012 17
Improved Interface Flexibility (1) Wide choice of host interfaces for various operating
environments
FC 2G/4G/8G FCoE 10G *) SAS 3G/6G iSCSI 1G/10G
New!
New! New!
G = Gbit/s *) Entry models only
Model Host interface No. of ports Max. no. of connectable hosts
DX80 S2 FC, FCoE, iSCSI, SAS 4/8 1024
DX90 S2 FC, FCoE iSCSI, SAS 4/8 1024
ETERNUS DX410 S2 FC 2G/4G/8G 4/8/12/16
1024 FCoE 10G 4/8
iSCSI 1G/10G
ETERNUS DX440 S2
FC 2G/4G/8G 4/8/12/16/20/24/28/32
1024 FCoE 10G 4/8/12/16
iSCSI 1G/10G
Product Introduction ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu, Release April 2012 18
Wide range of host interface options ensure optimal interface for customer requirements and usage scenarios
Host interface Connection Features Principal use
FC FC-SAN Assumed to be used with network components. Achieves high-speed data transfer over optic fiber networks.
For small or large scale SAN, enterprise data center.
FCoE FC-SAN Integrates FC-SAN environment and LAN environment to achieve a simple network.
For large-scale integration network, such as data center.
iSCSI IP-SAN Uses IP network to achieve SAN (IP-SAN) at low cost .
For small and medium-scale SNA (Storage Network Aggregation).
*) SAS DAS Highly reliable interface, enabling high-speed data transfer.
Directly connect servers and storage.
Improved Interface Flexibility (2)
*) SAS interface only available for the Entry models DAS: Direct Attached Storage, the number of hosts can be expanded by connecting a SAS switch
Product Introduction ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu, Release April 2012 19
Expansion of Host Interface
Flexible support of business extension To expand FC, FCoE, iSCSI, and SAS ports To expand from 4 to 8 ports by adding additional CAs To mix different types of
interfaces in one CM by adding additional CAs
FC (4 ports)
CM
CA
CM
CA
FC
FC (8 ports)
CM
CA CA
FC
D80 S2/ DX90 S2
CM
CA CA
FC (4 ports) + iSCSI (4 ports)
CM CM
iSCSI FC
CA CA CA CA The following port expansion is supported DX80/DX90 S2 FC, FCoE, iSCSI, SAS 4 -> 8 DX410 S2 FC 4 -> 8 -> 12 -> 16 FCoE, iSCSI 4 -> 8 DX440 S2 FC 4 -> 8 -> 12 -> 16 -> 20 -> 24 -> 28 -> 32 FCoE, iSCSI 4 -> 8 -> 12 -> 16
ETERNUS D410 S2
FC (16 ports)
FC
CM CM
CA CA CA CA
Product Introduction ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu, Release April 2012 20
DX410 S2 / DX440 S2 Memory Cache memory configurations of CM#0 and CM#1 must be
identical DX410 S2
• Supported cache configurations (two CMs) • 8 GB and 16 GB
• 2 GB DIMMs available • Memory expansion kit contains always 4 DIMM modules • Populate first DIMM slots marked 1 and then slots marked 2
DX440 S2 • Supported cache configurations (two CMs)
• 24 GB, 48 GB, 72 GB and 96 GB
• 4 GB and 8 GB DIMMs available • Memory expansion kit contains always 6 DIMM
modules • Populate first DIMM slots marked 1 and then slots marked 2
21 Copyright Fujitsu, Release April 2012 Product Introduction ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2
DX410 S2 DIMM slots CM#1
1 S
lot 0 2
Slot 1
1 S
lot 2 2
Slot 3
CM#0
1 S
lot 0 2
Slot 1
1 S
lot 2 2
Slot 3
DX440 S2 DIMM slots CM#0
1 S
lot 0 2
Slot 1
1 S
lot 2 2
Slot 3
1 S
lot 4 2
Slot 5
CM#1
1 S
lot 0 2
Slot 1
1 S
lot 2 2
Slot 3
1 S
lot 4 2
Slot 5
Channel Adapter Configuration (1) The CA configuration must be same for each CM Always use the same type of CA for the same slot position in both CMs
Installing order: CA#0, CA#1, CA#2 and then CA#3 All CA combinations are allowed DX440 S2 supports maximum of two CAs per CM with 100V
mains power supply
Copyright Fujitsu, Release April 2012 Product Introduction ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2
DX440 S2 - 1 to 4 adapters per CM CM#0
CA#0 FC-4 CA#1 FC-2
CA#2 iSCSI CA#3 empty
CM#1 CA#0 FC-4 CA#1 FC-2
CA#2 iSCSI CA#3 empty
DX410 S2 - 1 to 2 adapters per CM CM#0
CA#0 FC-2 CA#1 iSCSI
Dummy Dummy
CM#1 CA#0 FC-2 CA#1 iSCSI
Dummy Dummy
FC-2 = FC CA with two ports FC-4 = FC CA with four ports
22
Model DX80 S2 DX90 S2 DX80/DX90 DX410 S2 DX440 S2 DX410 DX440
SSD Capacity 100 / 200 / 400 GB 100 GB / 200 GB 100 / 200 / 400 GB 100 GB / 200 GB
Supported RAID RAID 0, RAID 1,
RAID 1+0, RAID 5, RAID 5+0, RAID 6
RAID 1 (1+1) RAID 1+0 (2+2)
RAID 5 (3+1)
RAID 0, RAID 1, RAID1+0, RAID 5, RAID 5+0, RAID 6
RAID 1 [1+1] RAID 1+0 [2+2, 4+4]
RAID 5 [3+1, 7+1]
Maximum number of RAID groups 60 RAID 120 RAID 1 RAID / 2 RAID
(1 CM / 2 CM model) 240 RAID 480 RAID 4 RAID 8 RAID
Maximum number of drives 120 240 5 / 9
(1 CM / 2 CM model) 480 960 8 16
There are no restrictions with RAID types any longer S2 models support all types of RAID whereas the earlier models
supported only three RAID types
There are no restrictions in the number of SSD drives that can be installed
SSD Configuration Rules
Product Introduction ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu, Release April 2012
Always refer to latest handbooks for potentially updated information.
23
Notes on Installing SSD Do not mix SSD and SAS disk drives in the same RAID group LUN concatenation with SAS Volume is unavailable
Eco-mode cannot be used with SSD Hot Spare must also be a SSD when a RAID Group is
configured with SSD
Product Introduction ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu, Release April 2012 24
Controller Management
Multipath Functionality
Product Introduction ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu, Release April 2012 25
Multipath Functionality (1) All ETERNUS DX Entry and DX Midrange systems support
assigned access path configuration Active-Active / Preferred Path Active/Active
Each RAID Group has an assigned CM (RAID Group owner) that handles I/O to this RAID Group and its associated Volumes If I/O is sent to the CM that is not the RAID Group owner, this
I/O is transferred internally over the CM midplane to the owner CM This has a slight impact on the I/O performance
RAID Groups are assigned to a CM with the ETERNUS Manager GUI Either manually or automatically when a RAID Group is created It is possible to change the assigned CM later if needed
26 Copyright Fujitsu, Release April 2012 Product Introduction ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2
CM0 CM1
RAID#0, assigned CM = CM0
RAID#1 assigned CM = CM1
ETERNUS DX
LUN-1 LUN-2
Multipath Functionality (2) This is a typical I/O Multipath configuration LUN1 is mapped to the server via two
ETERNUS DX ports, one on CM0 and one on CM1
Now the Multipath driver can pass the data via both physical lines to a particular Volume in the DX system In this assigned CM configuration
the LUN1 is controlled by CM0 The Multipath driver controls how the
access paths are utilized • For example, these MP drivers send data
directly to the assigned CM path as long as the CM is fully functional • ETERNUS Multipath Driver (EMpD) • VMware vSphere® Multi Path Driver
27 Copyright Fujitsu, Release April 2012 Product Introduction ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2
Data
LUN-1
MP-Driver
Multipath Failover Host Response set to Active-Active / Preferred Path The green LUN1 is assigned to CM0 CA port of CM0 is the optimized path CA port of CM1 is the non-optimized path
The blue LUN2 is assigned to CM1 CA port of CM1 is the optimized path CA port of CM0 is the non-optimized path
For both LUNs only the optimized path is being used In case of a path failure the
non-optimized path is used for I/O
28 Copyright Fujitsu, Release April 2012 Product Introduction ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2
I/O request
HBA#0 HBA#1
Application Server
LUN1 LUN2
Active Path
Standby Path
CM1-CA CM0-CA
ETMpD
ETERNUS DX S2
CM1-CA CM0-CA
Controller Module Failover In case a controller fails, the RAID Group ownership is handed
over to the other controller and the operation can continue In this example the CM1 now controls the RAID Groups owned
previously by the CM0
29 Copyright Fujitsu, Release April 2012 Product Introduction ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2
Cache CM0 CM1
Cache
Local area
Local area
Mirror CM0
Mirror CM1
I/O access I/O access
Crash
I/O access I/O access
Reliability
Ensured Reliability due to Redundant Configuration and Hot Maintenance
Cache Data Backup to Non-volatile Memory BUD - Boot-up and Utility Device Improved Remote Copy Function
Product Introduction ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu, Release April 2012 30
Redundant Configuration DX S2 Entry Redundant components Main components, such as
controllers and power supply units are redundant
Data integrity is ensured by redundant cache data
Drive components with redundant dual ports
Hot swap, Hot expansion Failed components are hot
swappable without having to stop the system
Hot expansion of drives Firmware can be updated
without stopping operations • Multipath configuration required
CPU Memory
EXP
CM#0
PSU
panel CM#1
CPU
EXP
Memory
SCU
PSU
EXP
PSU
EXP
PSU
IOM#0 IOM#1
SCU
panel
Controller Enclosure
Drive Enclosure (DE)
℃ ℃
℃ ℃
℃
℃ CA CA
IOC IOC
MP
・・・ ℃
MP
・・・ ℃
BUD BUD
Flash memory
Flash memory
Product Introduction ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu, Release April 2012 31
Redundant Configuration DX S2 Midrange Redundant components Main components, such as
controllers and power supply units are redundant
Data integrity is ensured by redundant cache data
Drive components with redundant dual SAS ports
Hot swap, Hot expansion Failed components are hot
swappable without stopping the system
Hot expansion of drives Firmware can be updated
without stopping operations • Multipath configuration required
DX410 S2 Controller Enclosure
CM#0 CM#1 2x PCIe (x8)
Mem
BUD
SAS 2.0 (x4) CPU
2-core
PCI-SW PCI-SW
IOC IOC
Mem
BUD
CPU 2-core
PSU
℃
I2C
IOM#1
PSU
℃
MP
・・・ ℃
EXP
PSU
℃
IOM#0 EXP
EXP EXP
Drive Enclosure (DE)
PSU
℃
Product Introduction ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu, Release April 2012
CA CA CA CA
BBU
32
Cache Mechanism Cache memory on each CM is divided into two logical areas Local area and Mirror area of the other CM
ETERNUS DX Entry and Midrange models Entry models with single or dual CM, Midrange always with two CMs For reliability data is mirrored in cache memory between the two CMs
Cache data is backed up in case of a main power failure DX80 S2 and DX90 S2
• Onto nonvolatile memory (NAND Flash) on CM • System Capacitor Unit (SCU) on the CM provides
power during the fast copy process DX410 S2 and DX440 S2
• Onto nonvolatile memory (SSD) on CM • Battery Backup Units (BBU) supply power during the
copy process
33 Copyright Fujitsu, Release April 2012 Product Introduction ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2
CM0
CM1
Mirrored Mirrored
Original Original
2 CM configuration
Mirrored
Cache Data Backup to Non-volatile Memory Protects cache data in case of a long time power failure There is no limit on the retention time of the data backed up to a
nonvolatile memory • Entry models use NAND Flash, Midrange models use SSD
CPU Memory BBU
CPU Memory
BBU CM#0
Data
Memory backup using batteries
CPU Memory
SCU/ Battery
Flash/BUD
Data
Cache data can be held even if power supply is interrupted
Entry: Flash Midrange: BUD CPU Memory
Entry: SCU Midrange: Battery
Data
Cache Protection Power is supplied from BBU to the memory during a power failure. Cache data is held during battery retention time
Data Cache data will be lost unless power is supplied during battery retention time
Power is supplied to CE during a power failure
Data
Back up cache data to a non-volatile
memory
Data Data
Product Introduction ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu, Release April 2012 34
BUD - Boot-up and Utility Device New feature in each CM of the DX S2 systems DX80 S2 and DX90 S2 BUD is a USB memory device holding the configuration data Cache data in case of power failure stored in a Flash memory
DX410 S2 and DX420 S2 BUD is an SSD holding the configuration data BUD is also used to store the cache data in case of power failure
Product Introduction ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu, Release April 2012
• Active/stand-by firmware • Configuration table • Version table • Etc.
• Cache data1)
• Control data • Registered firmware • Logs • Panic Dump
BUD
Data used to be stored in Compact Flash device (DX S1)
Data used to be stored in system disk (DX S1)
1) Only in DX400 S2 the cache date will be saved to the BUD
35
Features of Enterprise Proven Family Line N
o. o
f Hos
t Int
erfa
ces
Functionality
DX60 S2
DX80 S2
DX90 S2
DX400 S2 series
DX8700 S2 Enterprise
Midsize
Small
Entry
ETERNUS SF (AdvancedCopy Manager, Storage Cruiser) ETERNUS SF Express
Thin Provisioning
Generation S2
Storage Management
Efficiency Replication Remote Equivalent Copy (REC)
Data Integrity Reliability/RAID Protection
Controller Dual Controller / Redundant Components
Encryption
Redundancy
Controller or Disk Encryption
Advanced Copy (OPC, QuickOPC, SnapOPC, SnapOPC+, EC) Clone / Snap
Product Introduction ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu, Release April 2012 36
System Modules and Components
Product Introduction ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu, Release April 2012 37
DX80 S2/DX90 S2 Hardware Architecture
CPU
EXP
CM#0
PSU
Panel CM#1
CPU
EXP
SCU
PSU
EXP
PSU
EXP
PSU
IOM6#0 IOM6#1
SCU
Panel
Controller Enclosure
Drive Enclosure
℃ ℃
℃ ℃
℃
℃
IOC IOC
MP
・・・ ℃
MP
・・・ ℃
CA CA CA CA
SAS 2.0
PCI express Gen2 x4
SAS 2.0
Connection between CMs
LSI NAND Flash
LSI
IOM6: I/O Module Module connecting
expanded DEs
IOC: I/O Controller
CPU: Xeon 1.73 GHz
Memory: DDR3 DIMM
EXP: SAS Expander Connects expanded DE
MP: Midplane with dual ported SAS 2.0 bus
BUD
Memory
BUD
Non-volatile memory
NAND Flash
Memory
BUD: Boot up and Utility Device
Product Introduction ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu, Release April 2012
PSU : Power Supply Unit
SCU : System Capacitor Unit Electric double-layer capacitor
CA: Channel Adapter interface card
(FC/ FCoE/ iSCSI/ SAS)
38
CM#0 CM#1 2x PCIe (x8)
Memory
BUD
SAS 2.0 (x4) CPU
2-core
PCI-SW PCI-SW
IOC IOC
Memory
BUD
CPU 2-core
PSU
℃
I2C
IOM6#1
PSU
℃ PSU
℃
IOM6#0 EXP
BBU
EXP EXP
PSU
℃
Drive Enclosure
DX410 S2 Hardware Architecture
MP
・・・ ℃
4 times SAS out connectors per CE Connects expanded DE
panel ℃
Product Introduction ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu, Release April 2012
Controller Enclosure
CA CA CA CA
EXP
4 x CA: Channel Adapter interface card
(FC/FCoE/iSCSI)
IOC: I/O Controller 2 independent channels
CPU: Xeon 2.27 GHz 2 cores / 2 threads
BUD: Boot-up and Utility Device
PCIe switch: 2 times 8-lane
IOM6: I/O Module Connects expanded DE
Memory: DDR3 DIMM
EXP: SAS Expander 2 independent channels Connects expanded DE
PSU : Power Supply Unit
BBU: Battery Backup Unit
MP: Midplane with dual ported SAS 2.0 bus
39
DX440 S2 Hardware Architecture
CM#0
PSU
CM#1
PSU ℃ ℃
℃
IOC
PEX
BBU
PEX
CA CA CA CA CA CA CA CA
PEX
IOC IOC IOC
EXP EXP EXP EXP
PSU PSU
BP
℃ ℃
℃ ・・・
DE PSU PSU
℃ ℃
・・・
DE
MP ℃
PSU PSU
BP
℃ ℃
℃ ・・・
DE PSU PSU
℃ ℃
・・・
DE
MP ℃
PSU PSU
BP
℃ ℃
℃ ・・・
DE PSU PSU
℃ ℃
・・・
DE
MP ℃
PSU PSU
BP
℃ ℃
℃ ・・・
DE PSU PSU
℃ ℃
・・・
DE
MP ℃
BUD
CPU 4-core
Memory
BUD
CPU 4-core
Memory
PCIe (x8)
Controller Enclosure
Product Introduction ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu, Release April 2012
8 x CA: Channel Adapter interface card
(FC/FCoE/iSCSI)
DE: with redundant IOM6 Module and PSU
2 x IOC: I/O Controller 2 independent channels each
CPU: Xeon 2.53 GHz 4 cores / 8 threads
Memory: DDR3 DIMM
2 x EXP: SAS Expander 2 independent channels each
Connects expanded DE
PSU : Power Supply Unit
BBU : Battery Backup Unit
BUD: Boot-up and Utility Device
PCIe switch: 2 times 8-lane
8 x SAS out connectors per CE
per two SAS 2.0 channels up to 10 DE
40
Controller Enclosure (3.5" model)
Controller Enclosure (2.5" model)
Device Appearance DX80 S2/DX90 S2 (1)
#0 #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11
Rear view
Front view
CM#0
PSU#0 PSU#1
CM: Controller Module
PSU: Power Supply Unit
Rear view
Front view
CM#0
PSU#0
CM#1
PSU#1
Drive #0
#1
#2
#3
・・・・・・ #22
#23
#21
#20
CM: Controller Module
PSU: Power Supply Unit
Product Introduction ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu, Release April 2012
CM#1
Drive Panel
Panel
41
Device Appearance DX410 S2 / DX440 S2 Controller Enclosure
Front view BBU: Battery Backup Unit
BBU#0 BBU#1 BBU#2
Rear view
CM#1
CM#0
PSU#0 CA#0 CA#2 CA#1 CA#3
PSU: Power Supply Unit CA: Channel Adapter CM: Controller Module
Product Introduction ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu, Release April 2012
Operator Panel with LED indicators
Operator Panel with switches
Battery Unit
Charger Unit
PSU#1
42
Drive Enclosure (3.5" model)
Drive Enclosure (2.5" model)
Device Appearance Drive Enclosure
Rear view
Front view
IOM6#0
PSU#0
Drive
Rear view
Front view
#23
#0
#1
#2
#3
#22
・・・・・・ #21
#20
IOM6: I/O Module
PSU: Power Supply Unit
#0 #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11
IOM6#0
PSU#0
IOM6#1
IOM: Input/Output Module
PSU: Power Supply Unit
Product Introduction ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu, Release April 2012
IOM6#1
PSU#1
PSU#1
Drive Panel
Panel
43