Eddy current dynamometer | POWERLINK...GW series Eddy Current Brake major technical specifications...

POWERLINK Eddy Current Brake

Model selection and curves

[email protected]

Engine Endurance Test Motor Durability Test

Gearbox Test Engine Test in Container

Model Rated absorbed power Rated torque Max. speed Inertia Center high

GW6 6 kW 25 Nm 12,000 rpm 0.003 kgm2 215 mm

GW10 10 kW 50 Nm 12,000 rpm 0.01 kgm2 300 mm

GW16 16 kW 70 Nm 12,000 rpm 0.02 kgm2 300 mm

GW25 25 kW 120 Nm 11,000 rpm 0.03 kgm2 320 mm

GW40 40 kW 160 Nm 10,000 rpm 0.048 kgm2 330 mm

GW63 63 kW 250 Nm 9,000 rpm 0.068 kgm2 350 mm

GW100 100 kW 400 Nm 8,500 rpm 0.13 kgm2 365 mm

GW160 160 kW 600 Nm 8,000 rpm 0.24 kgm2 400 mm

GW200 200 kW 800 Nm 7,500 rpm 0.44 kgm2 470 mm

GW250 250 kW 1,100 Nm 7,000 rpm 0.68 kgm2 470 mm

GW300 300 kW 1,100 Nm 6,500 rpm 0.68 kgm2 470 mm

GW320 320 kW 1,500 Nm 6,000 rpm 1.03 kgm2 500 mm

GW400 400 kW 2,200 Nm 5,200 rpm 2.31 kgm2 600 mm

GW500 500 kW 2,800 Nm 5,000 rpm 3.45 kgm2 600 mm

GW630 630 kW 3,600 Nm 4,500 rpm 4.36 kgm2 650 mm

GW800 800 kW 5,000 Nm 4,000 rpm 11.9 kgm2 750 mm

GW1000 1,000 kW 7,000 Nm 4,000 rpm 19.8 kgm2 950 mm

GW1200 1,200 kW 9,000 Nm 3,800 rpm 35.4 kgm2 950 mm

GW1600 1,600 kW 11,000 Nm 3,500 rpm 41.6 kgm2 1,020 mm

GW2000 2,000 kW 14,000 Nm 3,200 rpm 84.3 kgm2 1,100 mm

POWERLINK GW series Eddy Current Dynamometer

GW series Eddy Current Brake major technical specifications

Item Requirement

Cooling medium : Clean and fresh water, free of impurities and debris

Cooling water pressure : 0.2 ~ 0.4Mpa

Dynamometer water outlet temperature : Less than 50℃

Direction of operation : Left‐handed or right‐handed, continuous work

Torque measurement accuracy : ±0.4% FS (GW6 to GW100), ±0.2% FS (GW160 to GW2000)

Speed measurement accuracy : ±1rpm

Torque measurement sensor : Tension‐compression force transducer

Speed measurement sensor : 60 pulse magnetic‐type speed sensor

GW6

Rated absorbed power: 6 kW

Rated torque:25 Nm

Max. speed:12,000 rpm

GW10


Rated torque:50 Nm


GW16


Rated torque:70 Nm


GW25


Rated torque:120 Nm


GW40


Rated torque:160 Nm


GW63


Rated torque:250 Nm


GW100


Rated torque:400 Nm


GW160


Rated torque:600 Nm


GW200


Rated torque:800 Nm


GW250


Rated torque:1,100 Nm


GW300




GW320




GW400




GW500




GW630




GW800




GW1000

Rated absorbed power: 1,000 kW



GW1200




GW1600




GW2000




Water consumption chart (1)

Note: The cooling water Q depends on the inlet and outlet temperature difference Δt and absorption power p size. The water consumption listed in the chart is the theoretical calculation under 55 ℃maximum outlet temperature. In order to reduce the water temperature, the actual water amount should be increased.

Water consumption chart (2)

Note: The cooling water Q depends on the inlet and outlet temperature difference Δt and absorption power p size. The water consumption listed in the chart is the theoretical calculation under 55 ℃maximum outlet temperature. In order to reduce the water temperature, the actual water amount should be increased.

GW series Eddy Current Dynamometer Dimensions

Model A B C D E (Out) F (In) G H I1 I2 J K L M

GW6 100 100 330 356 DN32 DN15 177 215 143 143 600 13

GW10 180 120 330 370 DN25 DN15 210 300 260 200 600 18

GW16 180 120 330 370 DN25 DN15 210 300 260 200 600 18

GW25 150 150 400 432 DN25 DN20 212 320 220 220 600 18

GW40 240 160 360 400 DN32 DN15 225 330 330 250 600 18

GW63 240 160 360 400 DN32 DN20 225 350 330 250 600 18

GW100 240 240 445 485 DN32 DN25 266 365 82.5 72.3 360 320 1000 22

GW160 300 300 480 520 DN32 DN25 299 400 148 81.5 390 380 1000 22

GW200 360 360 580 640 DN50 DN40 350 470 184 101 485 450 1000 22

GW250 360 360 580 640 DN50 DN40 350 470 184 101 485 450 1000 22

GW300 360 360 580 640 DN50 DN40 350 470 184 101 485 450 1000 22

GW320 360 360 580 650 DN50 DN40 355 500 197.5 108.5 510 440 1000 22

GW400 400 400 630 700 DN65 DN50 400 600 174 128 580 510 1000 28

GW500 400 400 680 754 DN65 DN50 420 600 187.5 187.5 600 550 1000 28

GW630 430 430 680 760 DN65 DN50 442 650 184 153 625 595 1000 28

GW800 480 480 820 915 DN80 DN65 513 750 219 161 720 630 1500 28

GW1000 550 550 905 1000 DN80 DN65 560 950 240 177 800 700 1500 30

GW1200 600 600 1030 1130 DN100 DN80 630 950 271 200 885 775 1500 30

GW1600 600 600 1105 1215 DN100 DN80 670 1020 298 219 970 850 1500 30

GW2000 700 700 1164 1274 DN100 DN100 670 1100 327 241 1070 930 1800 30

Dimension of dynamometer coupling

Model A B C D E F

GW6 6-φ6.5 42h6 62 80 2 8

GW10 6-φ6.5 42h6 62 80 2 8

GW16 6-φ6.5 42h6 62 80 2 8

GW25 6-φ6.5 52h6 72 90 2 10

GW40 6-φ8.5 75h6 101.5 125 2 13

GW63 6-φ8.5 75h6 101.5 125 2 13

GW100 8-φ10.5 90h6 130 155 3 16

GW160 8-φ10.5 90h6 130 155 3 16

GW200 8-φ10.5 90h6 130 155 3 16

GW250 8-φ10.5 90h6 130 155 3 16

GW300 8-φ10.5 90h6 130 155 3 16

GW320 8-φ10.5 90h6 130 155 3 17

GW400 8-φ16.5 140h6 190 225 4 27

GW5008-φ16.5

140h6190

225 4 278-M16 196

GW630 8-φ19 150h6 205 245 5 27

GW800 8-φ19 150h6 205 245 5 29

GW1000 8-φ20.5 175h6 245 285 5 32

GW1200 8-φ20.5 175h6 245 285 5 36

GW1600 8-φ20.5 175h6 245 285 5 36

GW2000 8-φ20.5 175h6 245 285 5 36

Eddy current dynamometer | POWERLINK...GW series Eddy Current Brake major technical specifications...

Documents

Transcript of Eddy current dynamometer | POWERLINK...GW series Eddy Current Brake major technical specifications...