E-9 · 2014-01-15 · E-9 SSH Flexible Fixture Hangers: Heavy Duty Outlet Box Swivel UNILETS® for...
3
E-9 SSH Flexible Fixture Hangers: Heavy Duty Outlet Box Swivel UNILETS® for Use with Threaded Rigid Metal Conduit and IMC. Ball Joint Swivel Permits 20° Swing. Fixture Fixture Stud Stem Size Length Size (Inches) (Inches) (A) Concrete Box ^ Safety Swivel Hanger •k For Concrete Box 2-1/2" to 4" Deep Support Wt., Lbs. and (Kilograms) Catalog Number I 1/2 3/8 2.19 (5.6cm) 500 Ibs. (225 kg) 11360 Octagonal Box Safety Swivel Hanger For 4" Octagonal Box 1-1/2" or 2-1/8" Deep 1/2 3/8 2.19 (5.6cm) 500 Ibs. (225 kg) 11355 Square Box Safety Swivel Hanger For 4-11/16" Square Box 1-1/2" or 2-1/8" Deep 1/2 3/8 2.19 (5.6cm) 500 Ibs. (225 kg) 11362 Cat. No. 11360 Safety Swivel Hanger installed in OCRS-1/2 Concrete Box with OCP3/8 Plate Cat. No. 11362 Safety Swivel Hanger installed in a 4-11/16" Square Box shown with NBFS-38 (not included) Industrial lighting installations often employ the use of extra heavy fixtures requiring a properly anchored swivel attachment, assuring positive safety to carry the necessary weight. In the Type "SSH" Safety Swivel Hanger, the weight of the entire suspended unit is borne by a fixture stud instead of re- lying upon the screws and screw ears of the box or ring for support. The "SSH" hanger is furnished with a steel plate to serve as a cover for the 4" Concrete, Octagonal, and 4-11/16" Square boxes. Effective October, 1993 Copyright 1993 Printed in U.S.A. Appleton • I ELECTRIC COMPANY 1701 West Wellington Avenue Chicago, Illinois 60657 PAGE 9
Transcript of E-9 · 2014-01-15 · E-9 SSH Flexible Fixture Hangers: Heavy Duty Outlet Box Swivel UNILETS® for...
E-9SSH Flexible Fixture Hangers:Heavy Duty Outlet Box SwivelUNILETS® for Use with Threaded Rigid Metal Conduit and IMC.Ball Joint Swivel Permits 20° Swing.
FixtureFixture StudStem Size LengthSize (Inches) (Inches) (A)
Concrete Box^ Safety Swivel Hanger•k For Concrete Box 2-1/2" to 4" Deep
Support Wt.,Lbs. and(Kilograms)
CatalogNumberI
1/2 3/8 2.19 (5.6cm) 500 Ibs. (225 kg) 11360
Octagonal BoxSafety Swivel HangerFor 4" Octagonal Box 1-1/2" or 2-1/8" Deep
1/2 3/8 2.19 (5.6cm) 500 Ibs. (225 kg) 11355
Square BoxSafety Swivel HangerFor 4-11/16" Square Box 1-1/2" or 2-1/8" Deep
1/2 3/8 2.19 (5.6cm) 500 Ibs. (225 kg) 11362
Cat. No. 11360 Safety Swivel Hangerinstalled in OCRS-1/2 Concrete Boxwith OCP3/8 Plate
Cat. No. 11362 Safety Swivel Hangerinstalled in a 4-11/16" Square Boxshown with NBFS-38 (not included)
Industrial lighting installations oftenemploy the use of extra heavy fixturesrequiring a properly anchored swivelattachment, assuring positive safety tocarry the necessary weight. In the Type"SSH" Safety Swivel Hanger, theweight of the entire suspended unit isborne by a fixture stud instead of re-lying upon the screws and screw earsof the box or ring for support. The"SSH" hanger is furnished with a steelplate to serve as a cover for the 4"Concrete, Octagonal, and 4-11/16"Square boxes.
Effective October, 1993Copyright 1993 Printed in U.S.A. Appleton
• I ELECTRIC COMPANY
1701 West Wellington AvenueChicago, Illinois 60657
PAGE 9
E-2Flexible Fixture HangersUNILETS® for Use with Threaded Rigid Metal Conduit and IMC.
Applications• Designed for suspension of HID,fluorescent and incandescent lightingfixtures.• AL Series functions as combinationconduit outlet box and hanger.• JB, GS and AHG cushion hangers areenclosed and gasketed—ideal wheredust and dampness are present.• JB and GS hangers designed for usewith JB and GS boxes.• SSH heavy duty swivel hangers formounting to outlet and concrete boxes.• SHC fixture hanger covers formounting to 3-1/4" and 4" octagonalboxes and 4" square boxes.Features: All hangers• All fixture hangers protect fixtureagainst wind and vibration damage.• Cushion type for added protectionwhere lighting fixtures are subjected tovibration.Features: AL Series Hangers• Dual function—conduit outlet box andfixture hanger.• Choice of ball or cushion type.• Swivel joint construction—allows 20°swing from vertical.• Cushion style, with conical spring,supports up to 120 Ibs.• Cushion type has setscrew for lock-ing fixture stem.• Fixture and hanger stem can be wiredat work bench.• Connection block available for con-venient wiring of fixture leads.Features: JB and GS Hangers0 Mount directly to JB and GS castconduit outlet boxes.• Choice of ball or cushion type.• Ball type permits 15° swing, cushiontype 8° swing from vertical.• Cushion type is enclosed and gas-keted.
Effective October, 1993Copyright 1993 Printed in U.S.A.
PAGE 2Appleton
• I ELECTRIC COMPANY
1701 West Wellington AvenueChicago, Illinois 60657
E-3Flexible Fixture HangersUNILETS® for Use with Threaded Rigid Metal Conduit and IMC.
Features: AHG Hangers© Enclosed and'gasketed.• Leather diaphragm keeps moistureand dirt out of system.• Cushion type—permits 8° swing fromvertical.Features: UNJ HangersO Economical general purpose hanger.• Choice of ball or cushion type.• Ball type permits 15° swing, cushiontype 8° swing from vertical.Features: GHP ReceptacleHangers© Permit quick disconnect and removalof fixture for maintenance.• With 120/208/240, or 277 or 480 voltreceptacle, EFHM safety lock, FS box.and steel cover.• Covers have stainless steel screws tospeed installation, prevent "freezing" ofscrews.• Available in pendant or feed-thru.• Available with matching cord set—seeCatalog Section "R".Features: FH/FHSN/EF Hook andLoop Hangers0 Malleable iron for strength and safety.• Hook and loop combination permitsquick disconnect and removal of fixturefor maintenance.• Offer inexpensive means of pendantflexible suspension of lighting fixtures.• Permit free swing in any direction.• EF and FHSN jaw openings can becompletely closed for added safety.Features: FHS Support HangersO Provide up to 350 Ibs. support for flu-orescent fixtures on the non-electricalside of mounting.• Straddle a maximum of 1-1/4" conduitand take 1 /2" or 3/4" fixture hook or con-duit.Features: SSH Hangers© Heavy duty—support fixtures up to500 Ibs.• Steel plate serves as cover for outletor concrete box.• Ball type swivel joint permits 20° swingfrom vertical.
Features: SHC HangersO Ball type swivel joint permits 20°swing from vertical.• Support fixtures with a maximumweight of 100 Ibs.Standard Materials• AL and GHP series hangers: malle-able iron with steel cover.• JB, GS and AHG fixture hangers:malleable iron.• UNJ fixture hangers: malleable ironand steel.• FH and EF hooks and loops and FHSdummy support: malleable iron.• SSH heavy duty outlet box swivel han-gers: malleable iron and steel.• SHC outlet box swivel hanger covers:steel body with malleable iron swivelhub.Standard Finishes•AL and GHP series hangers: malle-able iron parts, triple-coat— (1) zincelectroplate, (2) dichromate, and (3)epoxy powder coat; steel parts, zincelectroplate.• GS and AHG: triple-coat—(1) zincelectroplate, (2) dichromate, and (3)epoxy powder coat.• UNJ: malleable iron parts, zinc elec-troplate and clear chromate; steel parts,zinc electroplate.• JB series, FH/EF hooks and loops andFHS dummy support: zinc electroplateand clear chromate.• SSH heavy duty and SHC outlet boxswivel hangers: malleable iron parts,zinc electroplate and clear chromate;steel parts, zinc electroplate.Compliances• JB, GS and AHG cushion type hang-ers suitable for classified location usein Class I, Division 2 areas, if installedin compliance with NEC 501-9(b).• Appleton malleable iron productsconform to ASTM A47-77, Grade 32510,which has the following properties: ten-sile strength, 50,000 psi; yield, 32,000psi; and elongation, 10%.• Appleton aluminum products are pro-duced from a high strength copper-free(4/10 of 1% max.) alloy.
Product Cross-Reference• Other classified location fixture hang-ers are listed in Catalog Section "H". D
Effective October, 1993Copyright 1993 Printed in U.S.A. Appleton
• I ELECTRIC COMPANY
1701 West Wellington AvenueChicago, Illinois 60657
PAGES
