YUN-2D GIMBAL

7、GYRO

1、Data connector

Data connector

Tilt motor connector(PIT.MOT)

Rolling motor connector(ROLL.MOT)

Tilt scoket(PIT)

Rolling scoket(ROLL)

Power -

Gyro connector

4、Tilt scoket(pit)

5、Rolling scoket( roll)

6、Power -

Please connect with computer software when you need to set the parameter.

Connect with tilt motor

Connect with rolling motor

Used for receiver tilt connect

Used for receiver rolling connect

Receiver power -

Connect with gyro

2、Tilt motor connector(pit.mot) 3、Rolling motor connector( roll.mot)

1

2

3

4

5

6

7

Top carbon frame

Bottom carbon frame

Gyro

Control board

Rolling motor( roll.mot)

Tilt motor(pit.mot)

Gopro Hero3 camera

Vibration absorber*4

1. connection diagram of control board

2.component of gimbal

YUN-2D gimbal is tested by using Gopro Hero3 camera in factory before delivery. It can be perfectly compatible with quadcopter and Hexacopter in the ready market. It help you to take wonderful aerial photography images and videos.

YUN-2D 3. installation instruction：

1. Install the gimbal on the aircraft.

2、Mount Gopro Hero3 camera into the Gimbal frame.

3、Connect with receiver. We recommend to connect into the 7th and 8th channel( pleases do not take this recommendation if the transmitter is or under 6 channel, use fixed-angle to take photography ).

4、Plug gimbal into battery. Please be noted that 11.1V Li-po battery is suitable for this gimbal. Please keep the gimbal in

horizontal position and wait for 10 seconds when connecting with power supply, the gimbal will automatically adjust the camera to

the horizontal position of the factory settings after Gryo initialization completed.

A. Fix the top carbon frame on the aircraft.

。

B. Put the vibration absorber into the hole of bottom carbon frame.

Used for receiver tilt connect

Used for receiver rolling connect

GIMBAL