Drema Furnica News - EN

w w w. d re m a . p l • w w w. f u r n i c a . p l • w w w. d re m a . p l • w w w. f u r n i c a . p l • w w w. d re m a . p l

NEW

S

DREMA FURNICADREMA FURNICAB 2 B F O R U M O F W O O D W O R K I N G A N D F U R N I T U R E B R A N C H

POZNAŃ FAIR MAGAZINE SPECIAL ISSUE ISSN 1230-8994(06) MARCH 2010 CIRCULATION 45000 COPIES

NEW PRODUCTS AT THE FAIRFurniture Factory Live– it is worth to see

We expose trends in kitchens– Charm of Detail

NOWOŚCI NA TARGACH

FABRYKA MEBLI NA ŻYWO- to trzeba zobaczyć!

DEMASKUJEMY TRENDY W KUCHNIACH - Urok Detalu

Visit us at

Rimini 20-24.04.10

[email protected] www.scmgroup.com

Our commitment30 million euros of new investmentsin technology and know-howso as to provide the ultimate service to all our customers Worldwide.

MarMara ahorn Tessera CoIMBra sTroMBerg ahorn BUChe BaVarIa asTorIa ZweTsChge BrICks BernsTeIn eIChe IMaBarI eIChe alZey eIChe hIDDensee BUChe kanDy JaCaranDa FIlo larnaCa Zypresse aBerDeen Cherry sylVensTeIn ahorn hIDDen-see BUChe palInka nero MarqUIna ManIpUr saTInwooD leTra aTaMI BaMBUs wallIs ZweTsChge salIsBUry oak VIChy apFel-BaUM larICIo pIne MarMara Maple sTroMBerg Maple asTorIa plUM BrICks alZey oak FelDBerg ahorn hIDDensee BeeCh kanDy JaCaranDa shIno larnaCa Cypress aBerDeen Cherry sylVensTeIn Maple hIDDensee BeeCh palInka nero MarqUIna FIlo MarMara Maple ManIpUr saTInwooD aTaMI BaMBoo VIrgInIa walnUT leTra FIlo salIsBUry oak CoBUrg oak larICIo pIne CanVas palInka Tessera VIChy apple DeleMonT pear sTroMBerg Maple IkeBana saMerBerg BUChe Bergerle wenDelsTeIn eIChe MolDaU akaZIe BUChe BaVarIa salZaCh BUChe ThansaU ahorn VanCoUVer ahorn noCe CreMona noCe MIlano noCe orVIeTo CIlIegIo Tennessee MeMphIs Cherry oXForD Cherry MaInaU BIrnBaUM raVenna loCarno apFelBaUM noCe sonDrIo MarMara ahorn Tessera CoIMBra sTroMBerg ahorn BUChe BaVarIa asTorIa ZweTsChge BernsTeIn eIChe alZey eIChe hID-Densee BUChe kanDy JaCaranDa FIlo larnaCa Zypresse aBerDeen Cherry sylVensTeIn ahorn hIDDensee BUChe ManIpUr saTInwooD leTra aTaMI BaMBUs wallIs ZweTsChge salIsBUry oak VIChy apFelBaUM larICIo pIne MarMara Maple sTroMBerg Maple asTorIa plUM BrICks alZey oak FelDBerg ahorn hIDDensee BeeCh kanDy JaCaranDa shIno larnaCa Cypress aBerDe-en Cherry sylVensTeIn Maple hIDDensee BeeCh palInka nero MarqUIna FIlo MarMara Maple ManIpUr saTInwooD aTaMI BaM-Boo VIrgInIa walnUT leTra FIlo salIsBUry oak CoBUrg oak larICIo pIne CanVas palInka Tessera VIChy apple DeleMonT pear sTroMBerg Maple IkeBana saMerBerg BUChe Bergerle wenDelsTeIn eIChe MolDaU akaZIe BUChe BaVarIa salZaCh BUChe ThansaU ahorn VanCoUVer ahorn noCe CreMona noCe MIlano noCe orVIeTo CIlIegIo Tennessee MeMphIs Cherry wallIs ZweTsChge salIsBUry oak VIChy apFelBaUM larICIo pIne MarMara Maple FIlo asTorIa plUM BrICks alZey oak FelD-Berg ahorn hIDDensee BeeCh kanDy JaCaranDa shIno larnaCa Cypress aBerDeen Cherry sylVensTeIn Maple hIDDensee BeeCh palInka nero MarqUIna FIlo MarMara Maple ManIpUr saTInwooD aTaMI BaMBoo VIrgInIa walnUT leTra FIlo salIsBUry oak CoBUrg oak larICIo pIne CanVas palInka Tessera VIChy apple DeleMonT pear sTroMBerg Maple IkeBana saMerBerg BUChe wenDelsTeIn eIChe MolDaU akaZIe BUChe BaVarIa salZaCh BUChe ThansaU ahorn VanCoUVer ahorn noCe CreMona noCe MIlano noCe orVIeTo CIlIegIo Tennessee MeMphIs Cherry oXForD Cherry MaInaU BIrnBaUM raVenna loCarno apFel-BaUM noCe sonDrIo MarMara ahorn Tessera CoIMBra sTroMBerg ahorn BUChe BaVarIa asTorIa ZweTsChge BrICks Bern-sTeIn eIChe IMaBarI eIChe alZey eIChe hIDDensee BUChe kanDy JaCaranDa FIlo larnaCa Zypresse aBerDeen Cherry sylVen-sTeIn ahorn hIDDensee BUChe palInka nero MarqUIna ManIpUr saTInwooD leTra aTaMI BaMBUs wallIs ZweTsChge salIsBUry oak VIChy apFelBaUM larICIo pIne MarMara Maple sTroMBerg Maple asTorIa plUM BrICks alZey oak FelDBerg ahorn hID-Densee BeeCh kanDy JaCaranDa shIno larnaCa Cypress aBerDeen Cherry sylVensTeIn Maple hIDDensee BeeCh palInka nero MarqUIna FIlo MarMara Maple ManIpUr saTInwooD aTaMI BaMBoo VIrgInIa walnUT leTra FIlo salIsBUry oak CoBUrg pIne wallIs ZweTsChge leTra CoIMBra 25 Years of best-selling decors MarMara ahorn Tessera CoIMBra sTroMBerg ahorn BUChe BaVarIa asTorIa ZweTsChge BrICks BernsTeIn eIChe IMaBarI eIChe alZey eIChe hIDDensee BUChe kanDy JaCa-ranDa FIlo larnaCa Zypresse aBerDeen Cherry sylVensTeIn ahorn hIDDensee BUChe palInka nero MarqUIna ManIpUr sa-TInwooD leTra aTaMI BaMBUs wallIs ZweTsChge salIsBUry oak VIChy apFelBaUM larICIo pIne MarMara Maple sTroMBerg Maple asTorIa plUM BrICks alZey oak FelDBerg ahorn hIDDensee BeeCh kanDy JaCaranDa shIno larnaCa Cypress aBerDe-en Cherry sylVensTeIn Maple hIDDensee BeeCh palInka nero MarqUIna FIlo MarMara Maple ManIpUr saTInwooD aTaMI BaM-Boo VIrgInIa walnUT leTra FIlo salIsBUry oak CoBUrg oak larICIo pIne CanVas palInka Tessera VIChy apple DeleMonT pear sTroMBerg Maple IkeBana saMerBerg BUChe Bergerle wenDelsTeIn eIChe MolDaU akaZIe BUChe BaVarIa salZaCh BUChe ThansaU ahorn VanCoUVer ahorn noCe CreMona noCe MIlano noCe orVIeTo CIlIegIo Tennessee MeMphIs Cherry oXForD Cherry MaInaU BIrnBaUM raVenna loCarno apFelBaUM noCe sonDrIo MarMara ahorn Tessera CoIMBra sTroMBerg ahorn BUChe BaVarIa asTorIa ZweTsChge BernsTeIn eIChe alZey eIChe hIDDensee BUChe kanDy JaCaranDa FIlo larnaCa Zypresse aBerDeen Cherry sylVensTeIn ahorn hIDDensee BUChe ManIpUr saTInwooD leTra aTaMI BaMBUs wallIs ZweTsChge salIsBUry oak VIChy apFelBaUM larICIo pIne MarMara Maple sTroMBerg Maple asTorIa plUM BrICks alZey oak FelDBerg ahorn hIDDensee BeeCh kanDy JaCaranDa shIno larnaCa Cypress aBerDeen Cherry sylVensTeIn Maple hIDDen-see BeeCh palInka nero MarqUIna FIlo MarMara Maple ManIpUr saTInwooD aTaMI BaMBoo VIrgInIa walnUT leTra FIlo salIs-BUry oak CoBUrg oak larICIo pIne CanVas palInka Tessera VIChy apple DeleMonT pear sTroMBerg Maple IkeBana saMer-Berg BUChe Bergerle wenDelsTeIn eIChe MolDaU akaZIe BUChe BaVarIa salZaCh BUChe ThansaU ahorn VanCoUVer ahorn noCe CreMona noCe MIlano noCe orVIeTo CIlIegIo Tennessee Cherry MeMphIs wallIs ZweTsChge salIsBUry oak VIChy ap-FelBaUM larICIo pIne MarMara Maple FIlo asTorIa plUM BrICks alZey oak FelDBerg ahorn hIDDensee BeeCh kanDy JaCa-ranDa shIno larnaCa Cypress aBerDeen Cherry sylVensTeIn Maple hIDDensee BeeCh palInka nero MarqUIna FIlo MarMa-ra Maple ManIpUr saTInwooD aTaMI BaMBoo VIrgInIa walnUT leTra FIlo salIsBUry oak CoBUrg oak larICIo pIne CanVas palInka Tessera VIChy apple DeleMonT pear sTroMBerg Maple IkeBana saMerBerg BUChe Bergerle wenDelsTeIn eIChe MolDaU akaZIe wallIs ZweTsChge www.schattdecor.com VanCoUVer ahorn noCe CreMona noCe MIlano noCe orVIeTo CIlIegIo Tennessee MeMphIs Cherry oXForD Cherry MaInaU BIrnBaUM raVenna loCarno apFelBaUM noCe sonDrIo MarMara ahorn Tessera CoIMBra sTroMBerg ahorn BUChe BaVarIa asTorIa ZweTsChge BrICks BernsTeIn eIChe IMaBarI eIChe alZey eIChe hIDDensee BUChe kanDy JaCaranDa FIlo larnaCa Zypresse aBerDeen Cherry sylVensTeIn ahorn hIDDensee BUChe palInka nero MarqUIna ManIpUr saTInwooD leTra aTaMI BaMBUs wallIs ZweTsChge salIsBUry oak VIChy apFelBaUM larICIo pIne MarMara Maple sTroMBerg Maple asTorIa plUM BrICks alZey oak FelDBerg ahorn hIDDensee BeeCh kanDy JaCaranDa

NEWS DREMA • FURNICA 4

Dear Readers,

It is my pleasure to present to you DREMA FURNICA NEWS, a maga-zine dedicated to practitioners operating in the different sectors of the wood and furniture industries.

This year’s DREMA International Trade Fair of Machines and Tools for Wood and Furni-ture Industries and FURNICA International Trade Fair of Components for Furniture Pro-duction, two trade shows held concurrently under the honorary auspices of the Minister of Economy, have attracted over 800 exhibi-

tors who will be showing their products on an area of nearly 30,000 m2. The fairs in Poznań will feature a range of innovative products, many of them exhibited for the first time, prepared by leading companies especially for the trade shows which will take place in April. A foretaste of these inspir-ing solutions is presented in this magazine.

A visit at DREMA and FURNICA is not only an opportunity to see the offer of the top glo-bal companies which supply their products to the sector, but also a unique opportunity to get information helpful in making eco-nomic decisions. Therefore, together with our partners we have organized demonstra-tion spaces for technologies of the future. While visiting DREMA, you should see the Live Furniture Factory, a special presentation space where full-scale machinery will pro-duce upholstered furniture that boasts inter-esting design using cutting-edge technology and materials. This year’s FURNICA will also involve a display of components for the pro-duction of kitchen furniture and presenta-tions showing kitchen furniture designs. New trends will be showcased in an area called

Charm of Detail – Kitchen from inside. The name stands for both an exhibition showing the world of components and for an interest-ing program addressed to professionals.

The trade shows scheduled for April also include an interesting programme of meet-ings targeted at the wood industry. I partic-ularly recommend the Economic Forum of the Polish Wood and Furniture Industry POLWOOD, a meeting of representatives of leading companies and organizations. I also recommend participation in seminars on sawmilling where scientists and practi-tioners will be presenting their vision of innovation in this vital sector of the wood industry.

Hoping that this edition of DREMA FURNICA NEWS will inspire you to come to Poznań and make your stay at the fairs easier, I wish you a lot of success in business and hope that you will find the magazine pleasant to read.

Yours sincerely Hanna Ochnik-Pawłowska DREMA and FURNICA Project Director

Hanna Ochnik-Pawłowska DREMA and FURNICA Project Director

w w w.drema.pl • w w w.furnica.pl • w w w.drema.pl • w w w.furnica.plIN THE ISSUE

1-3.10.2010Katowice

Presentation of woodworking technologies in theory and practice addressed to small and medium enterprises.

Join us in Katowice for the most important industry meeting in South Poland.

Organisers:More at: www.dsm.katowice.pl

DREMA • FURNICA NEWS 5


The most high-profile trade fair in the regionFor small, medium and large woodworking and furniture production companies, using state-of-the-art technologies is the way to achieve competitive advantage as regards operational costs and the quality of final products. There-fore, the DREMA fair is a much waited-for event for the industry in Central and Eastern Europe, and has a commanding position in the calen-dar of professionals looking for the right devel-opment directions for their companies. The rec-ommendation of the European Federation of Woodworking Machinery Manufacturers EUM-ABOIS proves this fair is a world-class event. A visit at the fair in Poznań is a unique chance in a year to explore the potential of live machinery. An addition to the interesting and diverse exhibitors’ exposition is a rich programme of industry-focused events along with unique presentation areas. Within the same time frame, the FURNICA International Trade Fair of Com-ponents for Furniture Production will be held on the fairgrounds of Międzynarodowe Targi Poznańskie: a very good thematic supplement for representatives of the furniture industry vis-iting Poznań. For professionals, the opportunity to visit DREMA and FURNICA fairs means a direct contact with about 800 leading global suppli-ers of technique and technology that will show-case their offer at a total of nearly 30,000 sq m of exhibition area. Exhibitors will come from 22 countries: Austria, Belgium, China, Columbia, Czech Republic, Denmark, Estonia, France, Ger-many, Hungary, Italy, Luxembourg, Netherlands, Poland, Russia, Slovakia, Slovenia, Spain, Swe-den, Switzerland, Turkey and USA. According to the organisers’ expectations, DREMA and FUR-

DREMA 2010 International Trade Fair of Machines and Tools for Wood and Furniture Industries FURNICA 2010 International Trade Fair of Components for Furniture Production.

The most high-profile trade fairs in Central and Eastern Europe

NICA 2010 will be visited by more than 22,000 professionals from Poland and abroad, active-ly looking for ways of development in business. Live production you have never seen before Live Furniture Factory is a special presentation space that combines the spheres of interest of visitors of the DREMA fair and the FURNICA International Trade Fair of Components for Fur-niture Production held concurrently.

This live, full-scale machinery will produce upholstered furniture that boasts interesting design using cutting-edge technology and materials. The Department of Furniture Design of the Poznań University of Life Sciences will supervise this interesting yet logistically diffi-cult undertaking. The Factory will not only pro-vide information about technological nuances, but also integrate the student community: the future staff of the furniture industry. Polwood – European-scale discussionThe upcoming edition of the fair will host the 4th Economic Forum of the Polish Wood and Furniture Industry POLWOOD organised jointly by the Inwestor Publishing House and Międzynarodowe Targi Poznańskie. Attract-ing representatives of leading woodworking companies and industry circles, the forum will address sawmill and furniture industries, focus-ing on issues related to chief challenges for the industry and its development paths. The posi-tion of the Polish wood and furniture indus-try in the European Union will be high on the agenda, as well. Representatives of main indus-try organisations from abroad and journalists of industry media from Poland and abroad will be invited to this meeting.

DREMA for sawmill industryThe sawmill sector is a crucial part of the wood-working industry, and the DREMA fair will fea-ture events addressed to professionals from this very sector. These will among others include the „Cutting-edge technologies for sawmill indus-try” seminar attended by invited companies and partners from research milieus and present-ing the most interesting solutions to streamline production in small, medium and large saw-mills. The organisers are hoping for high turn-out from companies interested in long-term business development based on economic and safe production methods.

Island of AssociationsThe professional format of the DREMA fair will be confirmed at the Island of Associations. It will be attended by leading industry organisations, which will facilitate establishing many interest-ing contacts and gaining industry insight in global terms.

Competitions and exhibitionsThe 2010 edition of the fair will also fea-ture interesting competitions and exhibitions organised by the Inwestor Publishing House, the editor of Gazeta Przemysłu Drzewne-go as well as Meblarstwo and Drewnotechni-ka monthlies and the Drzewny.pl Web portal, and Międzynarodowe Targi Poznańskie. The 9th Polish Championships in Nail Hammering, with prizes for winners, will stir a lot of emotions. Students will have their “Conjured from wood” competition aimed at promoting professions related to wood processing, whereas stamp collectors fond of wood will be thrilled to see an exhibition of a rich collection of stamps from all over the world held under a slogan “Wood in stamps”.

Charm of detail – Kitchen from the insideKitchen from the inside – this is a very tricky title (a wordplay in Polish: Kuchnia od kuchni) of the next edition of the CHARM OF DETAIL exhibi-tion addressed mainly to kitchen furniture man-ufacturers, kitchen studios, and in particular to designers and sales advisors. The area has been divided into two zones: exhibition zone and knowledge zone.

Poznań: it is worth to be hereMutually complementary DREMA and FUR-NICA fairs are among top international events addressed to professionals from the wood-working and furniture industries. Thanks to over 100 new products and international pre-mieres along with interesting conferences and presentation areas, it is really worth to be there. The organisers have taken care of high comfort of your stay: registered visitors will enjoy free entry, and you can rest and have free refreshments in Rest&Meet Points at fair-grounds. Międzynarodowe Targi Poznańskie very much encourages you to register on-line at www.mtp24.pl or on-site, directly at ticket offices. For unregistered visitors, tickets will be priced at 60 PLN (single-entry ticket) and 90 PLN (four-day ticket). Guests who come by car will be happy to use the attended car park locat-ed within 350 m from the fairgrounds (Mate-jki Street). A convenient location in the vicini-ty of the railway station and the Ławica airport is good news for all those who prefer alternative ways of travel.

On 13-16 April 2010, the 26th edition of the DREMA International Trade Fair of Machines and Tools for Wood and Furniture Industries will be held in Poznań under a slogan “Technologies of tomorrow”. At the same time, FURNICA International Trade Fair of Components for Furniture Produc-tion will take place. Both prestigious events will give insight into cutting-edge solutions on the market and the condition of the industry in Central and Eastern Europe.

w w w.drema.pl • w w w.furnica.pl • w w w.drema.pl • w w w.furnica.plNEWS


The Forum has the form of a TV debate and its fourth edition is going to be divided into two panels: the wood panel and the furniture panel. The experts on the stage will address questions of current interest, among others whether this industry, so successful on international markets, has a place it deserves in the economic policy of Poland and the European Community?

- Together with invited guests, experts from Poland and abroad, we will ponder upon whether the economic success of Polish companies on the European market translates into the position of our country in the EU – said Małgorzata Wno-rowska, Polwood Project Coordinator. – Can Polish wood and furniture sector influence the European legislation in this field? Can we take advantage of the weak market in Europe and the collapse of many former leaders to fill the gaps that have appeared? What joint actions could be taken by entrepreneurs, researchers, associations and NGOs in order to improve the image of the Polish wood and furniture sector and promote it abroad?

Like every year, the Forum will be enriched with market research results that have not been published so far, as well as multimedia pres-entations and videos presenting development directions of this sector in the world. There will also be a premiere viewing of a video present-ing the latest investment of the Rettenmeier sawmill in Germany, producing 500,000 cubic meters of timber annually.

Events | Economic Forum of the Polish Wood and Furniture Industry POLWOOD 2010

Let us talk about EuropeOnly once a year, a few hundreds of guests, including managers of the largest enterprises from the woodworking and furniture industries, directors of organisational units of State Forests, researchers, economists and politicians, will all meet at the POLWOOD Forum to take part in the expert discussion supported with the latest research and analyses on the future of the woodworking and furniture industries.

Polwood Forum is a valuable form of discus-sion on current issues for the woodworking and furniture industries.

Polwood 2010 Award

The Polish woodworking and furniture industry is perceived worldwide as a major player on the global market. Not only large enterprises, but also small family-owned companies contrib-ute to intense growth of this branch of econ-omy. Poland’s accession to the European Union a couple of years ago and the benefits derived from the EU membership brought about not only unified production standards but also a level playing field on the free Community market. The Polwood competition emerged from the initiative of people who were deeply

committed to promoting good business solu-tion models and developing the wood and fur-niture industries in Poland. With the Polwood Award, we would like to identify and promote the highest standards of management and innovation in enterprises.

The goal behind the competition is to recog-nise those entrepreneurs operating on the

Polish wood and furniture market who point out new directions and set industry trends in management, development and innovation, serving as an example for others.

The POLWOOD Award goes to companies that boldly invest in modern technologies and take business decisions guided by corpo-rate social responsibility. Participation in the competition enhances the company’s pres-tige and contributes to building up the com-pany’s reputation.

Prep. by (dfn)

Phot

o by

P. P

iosik

Professional partners:



This year, the Live Furniture Factory will manu-facture a set of upholstered furniture (a set of living room furniture) that can be used in hotel lobbies, halls in public buildings or any wait-ing room. An armchair, a pouffe and a table will be made mainly of quality beech plywood and finished with solid wood. The idea behind it is that this furniture should be finished with the adhesive method, reducing the number of metal elements to a minimum. Different elements are quite difficult to process; there-fore, modern machinery will have to be used. This year’s Live Furniture Factory, organised by Międzynarodowe Targi Poznańskie, will take place thanks to the involvement of students of the Poznań University of Life Sciences under supervision of Professor Jerzy Smardzewski.

The furniture design in made in virtual envi-ronment, beginning from the design concept and construction together with dimensions, fully integrated with computer environ-ment and in consideration of durability crite-ria, so important today. Apart from functional elements, the furniture also has its safety parameters defined at the design stage, such as durability or elasticity. Simulating usage conditions, we can estimate furniture life – already at the design stage. Owing to this, intuitive behaviour and the necessity for future furniture tests are both eliminated.

The production management in the Facto-ry has been based on the ERP (Enterprise Resource Planning). This system will ensure

balancing production capacities, schedul-ing production works, planning purchases of necessary materials, calculating material usage and registration of work inflow at dif-ferent workstations through the use of bar-code scanning technology. This solution helps organise the logistics and saves time; what is more, it provides information about the oper-ations of a given employee at a given worksta-tion as well as information about actual pro-duction costs.

In previous years, the Factory manufactured box furniture made of boards and implement-ed furniture projects based on solid wood, thus becoming an exceptionally attractive event held under the DREMA International Trade Fair of Machines and Tools for the Wood and Furniture Industries. The project of this year’s Live Furniture Factory will be carried out on the basis of five M.A. theses written by stu-dents of the Poznań University of Life Scienc-es. Each student is responsible for a different stage of the project:

• Przemysław Myszkowski – development of parametric construction in CAD environ-ment

• Waldemar Mieszała – development of virtual Furniture Factory and the production technology in ERP environment

• Artur Majchrzak – concept of production management and registration of order inflow in ERP

• Piotr Podgórniak – concept of a produc-tion plant within the constraints of MTP fair-grounds

• Michał Maslej – control of construction rigidity and durability of manufactured furni-ture by way of numerical and experimental calculations.

Owing to joint involvement of the fair organ-isers, leading technology suppliers as well as students and researchers, the Live Furniture Factory once again confirms its unique edu-cational dimension, being the source of trans-fer of cutting-edge technologies for the furni-ture industry.

DREMA 2010 International Trade Fair of Machines and Tools for the Wood and Furniture Industries

Live Furniture Factory – a must-seeThe Live Furniture Factory is a unique presentation of furniture production in Europe based on state-of-the-art technologies supplied by leading world-class manufacturers. Already on 13-16 April in Poznań you will have an opportunity to see for yourself how upholstered furniture is made.

PROJECT PARTNERSTechnology suppliers:

AEROTERM, ADAMIK TRADE, AMATEC, ARKUS, BIZEA, GERBER TECHNOLOGY, HOECKER POLY-TECHNIK, HOMAG, IMA, INTEX, LEITZ, LOPING, MAKITA, POLPACK, REMA, RONDO 2, SCHUKO, SCM, SIA ABRASIVES, SWIFT SOFTWARE, TOP SOLUTION, UNISON, WEINIG

Component suppliers:

AD SYSTEM, BECKER ACROMA, HENKEL, JOWAT, KLEIBERIT, KLON, DREWZET

Professional Partner:

Poznań University of Life Sciences, Department of Furniture Design

Technical Consultant:

prof. dr Jerzy Smardzewski

Under the Honorary Auspices of:

Polish Chamber of Commerce of Furniture Man-ufacturers

Media Partners:

GAZETA PRZEMYSŁU DRZEWNEGO

MEBLARSTWO – Komponenty i Technologie

DREWNOTECHNIKA – Nowości, Innowacje, Tech-nologie

DREMA FURNICA NEWS – B2B Forum of Wood and Furniture Industry

More information: www.drema.pl/en | www.furnica.pl/ en



LIVE!

Międzynarodowe Targi PoznańskiePoznań International Fair

SET OF UPHOLSTERED FURNITURELIVE PRODUCTION LIKE NEVER SEEN BEFORE

Technology and component vendors:

Organizer: Media partner: Expert partner: Specialist partner:

13-16.04.2010, Poznań, Poland

www.drema.pl/en, www.furnica.pl/en



HOMAGOptimat BHP 210Through-feed CNC machining centre featuring a solid flat table for processing workpieces using nesting technology. Employing its routing tool, the machining centre enables cutting individual components of furniture bodies, upholstered furniture frames, or furniture fronts – all from a single raw panel. Nesting is an alterna-tive to sawing. Specifications: 12 kW liq-uid-cooled routing unit, 35 vertical spin-dles, 2 horizontal spindles in the X axis, 2 horizontal spindles in the Y axis, grooving saw (tilted 0-90°), 14-piece tool magazine, 2 CNC controlled Z axes, C axis, efficient vacuum pump: 500 m3/h + additional 500 m3/h, rich software package, WoodDesign software for 3D furniture design, device for unloading production boards and workpieces, controlled pressure ring for small workpieces.

SCMSandya 5-S Wide-Band Sanding Machine Sandya 5-S wide-belt sander will be applied for calibration, pre-sanding and finish sanding of furniture elements. The machine intended for oper-ation as part of the Furniture Factory comprises 2 working units: one fitted with a soft rubber (sanding) roller, as well as a combi unit with a hard (calibrating) roller and an electronic sec-tional pad (for finish sanding). The composition of the sander allows to use the steel roller of the combi unit for calibrating with one grit type, and afterwards to perform sanding oper-ation proper, this time with the use of 2 differ-ent grit types related with the first soft rubber roller and the electronic sectional pad. Two-speed main motor and seamless belt speed adjustment enable the selection of optimum processing conditions – both for solid wood and natural veneers, as well as lacquered surfaces. Eventually a set of rotary blowers removes process dust from sanded components. Abrasive belts used during processing are also cleaned by compressed air. This function significantly extends belt life and improves sanding quality. Sandya 5S features an electronically adjustable workta-ble, making it easier for the operator to reset the working thickness when switching between product types, without the need to measure the workpieces each time.

IMA Polska Sprzedaż i Serwis Sp. z o.o.BIMA 3004-axis CNC processing centre with an integrated axis, designed for high-capacity flexible processing as well as one-off and small batch produc-tion of furniture components and interi-or decoration elements. Resulting from 30 years’ experience of IMA experts in the field of stationary woodworking solutions, BIMA 300 is a smart machine concept that offers minimum process-ing times with maximum operating effi-ciency.

The machine is built on a massive, stable steel framework. There are guides mounted on the machine bed, along the X axis, supporting the movement of the main working extension arm. The machine body fea-tures an internal ribbing system to ensure unparalleled stability, rigidity and vibration resistance. Owing to the special design, a conveyor belt can be installed inside the machine bed for chip removal.

BIMA 300 offers optimum IMA WOP control system based on tried and tested software. IMA WOP 6.0 is a Windows-based control solution with an automatic machine setup and operation programme, real-time tool action management, and 3D processing simulation. The machine can be operated via a control panel mounted on the machine, or using a com-puter placed in a remote office (second licence included in the price).

REMADMMS-40/340 SPECIAL Circular SawDMMS-40/340 SPECIAL Circular Saw manufactured by REMA S.A. Reszel is a professional saw designed for sizing laminated panels, wood-based materials and wood. It is an excellent solution for both large manufacturing sites operated on a multi-shift basis, and for small carpentry shops. Characterised by outstanding parameters and superb sawing quality, this powerful and robust machine guarantees long and trouble-free operation. DMMS-40/340 SPECIAL circular saw has been designed and manufactured in Poland.

AMATECPegasus EXT5214H-55/545K-3x5 KH021, PL1553/4-thread, 2-needle industrial overlock sewing machine with a differen-tial bottom feed and alternating top feed system, designed for sewing heavy-weight fabrics; high foot lift; heavy-duty knife for fabric trimming; chain cutter; waste collector for fabric trimmings; electro-pneumatic foot lift. The EXT overlocks are the most advanced machines of this type in the market, offering an independently driven top feed system. This solution creates the possibility of keeping top and bottom feed systems collision-free, which greatly improves overall performance. Extra high foot lift and the possibility of setting wide stitch lengths make the EXT sewing machines an ideal solution for upholstery applications. Designed and manufactured in Japan, the EXT series guarantees an extremely long and trouble-free product life.Dürkopp Adler 867-190322A single-needle lockstitch flat bed machine with alternating bottom feed, needle feed and walking foot feed. Enlarged clearance under the arm (335 x 125 mm) allows to handle voluminous fabrics. The machine fea-tures a large vertical hook, overriding clutch, up to 9 mm adjustable top foot stroke, and a maximum sewing foot lift of 20 mm. This model also offers elec-tromagnetic thread trimming, two stitch lengths, electromagnetic lock-ing, electro-pneumatic foot lift and foot stroke adjustment during sew-ing (RAP, HP functions), integrated LED lamp. Up to 12 mm stitch length for standard seams and decorative topstitching; maximum thread size up to 10 Nm.Dürkopp Adler 550-12-24Optimised workstation for reproducible ruffling of upholstery elements, featuring an edge trimmer; single needle, double chain stitch, differen-tial bottom feed and top foot feed, electro-pneumatic foot lift, program-mable ruffling values – high rationalisa-tion effect due to joining and ruffling of cover pieces and interfacing materials with simultaneous trimming of excess material. Precise trimming results pos-sible even with voluminous padding material and intense ruffling thanks to a robust edge trimmer with a high knife stroke and smooth cutting action. Continuous reinforcement tape feed – from above or below – with additional tape tensioning to increase ruf-fling efficiency.

TECHNOLOGIES SHOWED IN THE FURNITURE FACTORY – LIVE!



ARKUSSpray booth pumpCharacterised by the pressure ratio of 36:1 and 100 cm3 volume, this

membrane pump belongs to the Merkur line of Graco’s pumps. It is a line of lubrication-free, non-freezing pumps, free from pulsation effects. Merkur 36:100 can be used with several different spray guns. Modern design and pulsation-free operation make it an ideal tool for automatic

spraying applications.Automatic spray gunsExcellent automatic spray gun. An ideal solution for mobile spray booth carriages or robot arms. The minimum weight of 545 g prevents overloads while the extremely short open time of just 60 ms guarantees optimum spraying precision. Another advantage of this solution is the possi-bility of automatic gun washing, including the nozzle, which helps reduce solvent loss and colour changeover time.

WEINIGPOWERMAT 1000 – A new definition of standard in four-side planersWith all the advantages of the new generation of moulders and a unique flexibility of applications, Powermat 1000 offers a solid foundation for your production needs. The standard ver-sion is well equipped and ideally suit-ed for utilising the varied possibilities created by the new WENIG profiling technology. The user can choose between the PowerLock tool system and a conventional solution. With up to 11 spindles, the machine will satisfy even the most demanding production expectations. The smart PowerCom control system will help you launch production in the blink of an eye, while the new Vario dust extraction hood system will provide a perfect finishing touch in terms of product quality and machine changeover time.

FlexiRip – The synonym for a flexible rip sawing machineThe genuine Jrion from RAIMANN offers endless possibilities of applica-tion in small, medium and large companies. Wherever square timber blocks, planks or boards are sawn, Flex-iRip proves itself to be an effective and flexible rip sawing machine. What our customers appreciate the most are unparalleled flexibility, optimum tim-ber yield and one-man operation. Flex-iRip is the best choice when you look for a universal solution! In addition to solid wood, you can rip such mate-rials as plastics, aluminium or different types of boards. The desired cut-ting length and width of the FlexiRip is adjusted to the dimensions of the workpiece. The operation is very simple: just place the workpiece on the table, align it and use the foot pedal to begin cutting. As the pedal is released, the saw blade descends and returns to the start position. The infinitely adjustable cutting feed speed ranges from 1 to 80 m/min.OptiCut S 90 – All economical cross-cutting optionsHigh cutting precision and simple operation – the OptiCut S 90 with a pusher offers both, while being highly productive. Compared with a manual cross-cut saw, OptiCut S 90 can cut 4 times more material, while involving half the staff.

Thanks to optimising solutions, timber yield is increased as well. Whether it is length cutting or optimising – you decide how the machine should be equipped, now or in the future. The machine is extremely versatile, for example due to the „manual cutting” option. The flexibility of appli-cations is a significant advantage, compared against more efficient through-feed saws. Whether packets, profiles, single planks or dowels are to be cut – OptiCut S 90 makes it all possible, with almost no need for making additional adjustments.

LEITZ

Circular Saw Blade

Low-noise (Anti-Schall) circular saw blade designed to reduce cutting noise by 10 db(A), which is subjectively perceived as a reduction by half. The blade is coated with a special film to offer the best noise-dampening properties – compared with all other solutions – at the same time avoiding increased cutting width.

DIAMASTER Cutting ToolsDiamond-coated DIAMASTER end mill cutting tools are suitable for processing different types of materials. They are perfectly suited for pre-treatment and finishing of all wood-based materials, especially laminated or veneered boards (particle boards, MDF, HDF, Multiplex), as well as HPL, Corian and light metals.

Drill BitsEntirely made of tungsten carbide, the drill bits allow to use higher rotational speeds (up to 12 000 rpm), which translates into higher processing quality. Moreover, they are 40 per-cent more durable than conventional drill bits made of steel.

End Mill CutterThe company will supply diamond-coated end mill cutters for nesting operations performed in the Furniture Factory Live show..Cutterheads and cutterblocks

They allow to obtain perfect surface quality and top processing efficiency. Whether applied for pre-planing or finish planing, using conven-tional machines, 4-sided planers or high-ca-pacity automatic planing systems, it is a profes-sional industrial solution for all applications.

INTEXCutter /DCS 3600/

DCS 3600 Cutter is a highly advanced automatic single-ply cutting system for fabrics, synthetic materials and tech-nical textiles, as well

as other materials used both in light industry and in sectors involving upholstered products. DCS is a brand of professional cutting systems manufactured by the US-based GERBER TECHNOLOGY, designed specifi-cally to deliver maximum throughput and unparalleled cutting quality, combined with a minimum operating workload and significant material savings. The DCS system provides operators and production managers with data on cutting time, efficiency, waste material, number of internal cuts, etc.



BIZEA

druk - offset: PANTONE Proces Blue i Red 032

Niebieski : R: 0 ; G:145 ; B:201Czerwony: R:239 ; G: 43 ; B: 45

BeA 380/16-420 Stapler

Designed for typical upholstery applications – the world’s most popular staple type (80/380) combined with the stapler regarded as the true market leader in all continents.

BeA 71/16-421 Profile Stapler

A special stapler with a thin nose for fixing „Keder” profiles. Made in Germany, it is very popular and widely appreciated in the US and Canada. Suitable for a wide variety of uphol-stery applications – large curved elements, bends or „Keder” profiles. Because of the nar-row ridge and thinner wire, type 71 staples prove an optimum solution.

BeA 14/50-763 Stapler

Popular with manufacturers of upholstered furniture frames. They enable fixing spacing blocks on armchair slats. Type 14 BeA / BIZON staples with the lengths of: 38, 40 and 45 mm.

BeA 351 – Glue gun

BeA 351 is a high-capacity glue gun recom-mended for continuous operation and for application of large adhesive amounts. The pneumatic feed mechanism and electronic control system enable precise adhesive dos-ing in a wide performance range. Due to the pneumatic nozzle and a special polypropyl-

ene-based SP adhesive, the gun also offers a spray application effect. With a selection of exchangeable nozzles, varying distance from the sur-face and pressure adjustment, various glue application patterns and densities can be obtained. The tool allows to fix upholstery elements during assembly – foam to plywood and fabric to foam – using swirl application method.

RONDO 2

PUR hosesPUR hoses manufactured by Rondo 2 are made from thermoplastic poly-urethane. Depending on the require-ments, PUR hoses can be produced in several types: anti-electrostatic, electrically conducting, flame retard-ant, with increased heat resistance, or approved for use with food prod-

ucts. Regardless of type, all PUR hoses are characterized by high resist-ance to abrasion. Diameter range: from 20 mm to 600 mm, depending on hose type. Wall thickness: from 0.5 mm to 5 mm, depending on the field of application. For the woodworking and furniture sectors, we rec-ommend PUR MB and PUR PL hoses characterised by increased abrasion resistance.

SCHUKOSchuko EcoVar 04 Modular Filter Filtration takes place on the external surface of filter bags – clean air is released through the internal surface (external blow). Filter bags are regenerated in the course of a pneumatic and mechanical process. A fan is placed at the clean-air side in a special soundproof chamber.

Thanks to the use of a special inlet box/inlet component, the speed of air stream carrying filtered mate-rial (chippings) is reduced at an early stage. The L-category filter cloth is antistatic, certified by BGIA. Total filter surface area: 150 m².

VACOMAT Mobile dust extractors Designed specifically to ensure mobility in the work area, VACO-MAT 250 and VACOMAT 300 mobile dust extractors have been designed in an identical way, the only difference between them being the filter surface and the fan. As a standard, the intake chamber is fitted on the right side, left-side version being avail-

able upon request. It should be noted that the control cabinet is not included in the standard scope of delivery. As different versions of cabinets are offered, they need to be ordered separately. The equipment comprises: large capacity expansion chamber, which helps reduce material stress on the filter medium. Fill level inspection window in the dust collecting bins. Filter hoses made of antistatic polyester needle felt, particularly advanta-geous for high dust contents, e.g. during processing of chip boards and MDF boards. BGIA-certified filter cloth. Automatic triggering of pneumatic and mechanical filter bag regeneration system. Compressed air impulse regeneration available upon request (paid extra). Monitoring of air flow volume (extraction capacity) by a pressure cell with a signal lamp. Auto-matic fire extinguishing system compliant with GS-HO-07 standard (no damage caused by water). Possibility of attaching Schuko’s Compacto bri-quetting press container. Low noise level due to the implementation of a double wall filter housing – 72 dB(A).

TOPSOLUTIONTopSolid Wood Software

TopSolid Wood software is integrated with a fully parametric CAD/CAM solution developed for the purpose of 3D envi-ronment design. TopSolid endures full integration of CAD (design, 2D docu-mentation, cost calcula-

tion) and CAM environments (CNC machine control, nesting, cutting optimisation), which guarantees that the entire product development process will be trouble-free. With this combination, any alterations in the 3D model are followed by an automatic update of the 2D documenta-tion in the CNC software (associativity).

TopSolid Wood is a kind of software dedicated for the woodworking industry, delivering all the tools needed for furniture design, e.g.: data-bases of furniture hardware, mouldings, veneers, materials, etc. Focus-ing on distribution and implementation of TopSolid and Ardis systems, TopSolution employs experts in the field of furniture production to make software integration in factories fast and trouble-free, which is evi-denced by our continually expanding list of references. Detailed soft-ware description is available at: www.topsolution.pl

w w w.drema.pl • w w w.furnica.pl • w w w.drema.pl • w w w.furnica.pl


SIA BIURO TECHNOLOGICZNE Sp. z o.o.TopTec Endless Abrasive Belts

A new generation of 1919 siawood TopTec endless abrasive belts, designed for mechan-ical treatment of workpieces on edge sand-ers as well as wide and narrow belt sanders. Belts made according to the TopTec technol-ogy remain under constant top coat control during production to ensure perfect joint fin-ishing and dust-free sanding process. Wide grit range (from P036 to P800) and optimum structure make this material suitable for a broad variety of sanding operations and for various types of wood, paint and varnish coatings.

UNISONUAL-130/4-OFP Automatic coating system

This automatic coating sys-tem is designed for through-feed coating of flat workpiec-es such as doors, furniture fronts and other elements of door joinery (door frames, door casings) and furniture joinery (furniture body com-ponents, etc.) with heights up to 80 mm.

UKS-300/240/240/2IR Drying chamberThe chamber helps reduce the drying time of spray coatings. The drying process uses thermal energy generated by gas-powered IR driers. Proper air circulation is ensured by blow fans.

LOPING s.c.Drying chamber

We are pleased to present one of the solutions manu-factured by Aeroterm – the hot air drying chamber designed for drying water and solvent-based coatings. The stationary hot air cham-ber is used for drying water-based coatings. The cham-ber is ready for loading processed workpieces placed on a rack trolley (or any other trolley). Water-soluble coat-ings are dried as the drying

cycle is launched, after which the system stops automatically. The drying process proceeds as hot air circulates inside the chamber. Air tempera-ture is controlled by the operator. Both fresh and recirculated air is fil-tered to provide maximum protection of the dried surfaces against dust. The system features a moist air exhaust discharge. It is a reliable, silent, efficient and safe solution, designed and manufactured in compliance with EU standards and regulations. In order to enable drying of solvent-based paints and lacquers, the machine can be produced in an explo-sion-proof version (upon request). The system is supplied in several mod-ules, ready for simple assembly in-house. The drying chamber must not be installed in locations subject to risk of explosion. It is available in two standard sizes, but can also be custom-made to meet individual custom-er needs. Try it yourself. Water-based lacquer drying process takes just 12 minutes.

HOECKER POLYTECHNIKExpert Z 20 Sanding TablePre-coating surface treatment as well as sanding between coating cycles can now be made easier thanks to our Expert Z 20/Z 30 sanding tables. They can be optionally fitted with a height adjustment system, and a vacuum suction table designed for holding the workpiece firmly in place. With this kind of equipment at a manual sanding workstation, sanding tasks are no longer burdensome or harmful for the operator.

Paint Star 22-7000 Dry coating wallProduct surface finishing quality is the trademark of your company. Using our extraction solutions ded-icated for coating systems you can save energy, reduce costs and protect the environment.

MAKITABO5030 Orbit sander

The sander is fitted with a powerful motor for heavy-duty applications. Quick-change hook-and-loop abrasive paper mounting system. Ergonomically profiled grip is ideally suited to the operator’s hands, ensuring maximum com-fort and control, while minimising hand fatigue and pain. It also features a sanding pad protec-

tion limiter. The bearing system is characterised by increased durability. Efficient through-the-pad dust collection system. Connection to an external dust extractor is possible without an adapter.BDF444RFE Mobile Driver Drill

2-speed driver drill with a Li-ion battery. Single sleeve keyless chuck enables fast and simple sin-gle-handed bit replacement. The tool is pow-ered by a lightweight and compact 4-pole DC motor. 16-step torque settings + drilling. Ergo-nomic anti-slip grip, aluminium gear housing. Twin LED light with afterglow for illuminating the workspace. The device is supplied with a spare battery and a charger.

POLPACKSE WRAPPER Semi-automatic pallet wrapperA modern semi-automatic wrapper for securing palletised goods using stretch and pre-stretch films. Entirely Polish design. Various wrapping modes available. A functional and reliable solution. Very easy to operate. Well equipped in the standard version.

HENKELDORUS MD041/1 Fast-bonding installation adhesiveThe adhesive is characterised by a very short bonding time and medium viscosity. It provides durable and flexible bonds that are suitable for fur-ther treatment. Unparalleled bond durability when applied on furniture and wood-based products. High moisture resistance; meets the require-ments of D2 class according to the EN 204 standard. The adhesive can be used for solid wood, glued laminated timber components, solid wood boards, furniture body assembly, dowel insertion, tenon joint assembly, application of laminates on chipboards and solid wood boards, etc. as well as edgebanding operations using natural veneers, HPL laminates, or solid wood strips in cold or hot pressing machines.

AD SYSTEMMultibond 5005 Adhesive A one-component, crosslinking, PVAC-based dispersion adhesive. Rec-ommended for cold or hot pressing, assembly bonding, or HF technol-ogy applications. Meets the requirements of D4 class acc. EN-204 stand-ard, and WATT 91 (IFT Rosenheim certified). The product has a neutral pH value. It contains special additives to prevent staining during edge-banding processes.

NEWS



A new visitor registration system for Poznań trade fair visitors available at www.mtp24.pl enjoys growing popularity among professionals. For DREMA and FURNICA visitors, registra-tion means free admission and additional privileges that facilitate your stay at the trade fair.

On-line registration for a trade fair is a great help for professional visitors because it helps save time on-site and involves bonuses from organisers. Apart from free admission, you receive a free exhibitors’ catalogue in electronic version and free access to cater-ing outlets at Rest&Meet Points. Organisers ensure a supply of up-to-date information about trade fairs, new products, events and shows directly to your e-mail address. Thus, you can prepare for your stay in Poznań through planning your meeting agenda.

Complete a form with your personal details to register at mtp24.pl. Upon correct sub-mission of all data, you will be automati-cally sent an e-mail with a link. Accept it to log into the system. You can view the histo-ry of your transactions and print document duplicates in the system. Retain your admis-sion ticket throughout your entire stay at the fair because you will need it at the exit, as well. The new visitor registration system is based on barcodes present on all docu-

ments admitting to the fairgrounds (tick-ets, invitations, exhibitors’ cards, press cards, vehicle entry passes); in order to enter the fairgrounds, you will have to scan the bar-code in a reader installed in a turnstile.

On all trade fair days assistance will be offered to visitors by the Client Assist-ant in the Eastern Lobby (entrance from ul. Głogowska) and WTC Lobby (entrance from ul. Bukowska).

Register for the trade fair and receive freebies! www.mtp24.pl

JOWATJowacoll 104.20 Adhesive

Universal adhesive suitable for various wood species, characterised by a long open time (up to 11 minutes), relatively low minimum film-forming temperature (ca. 5°C) and high resistance to dynamic loads. Filler-free product. Recommended especially for gluing support frames.

BECKER ACROMA POLSKAWaterborne Spray LacquerThis year Becker Acroma presents a new single-component waterborne lacquer, recommended for surface finishing by spray application. During Drema fair, the product will be used for coating furniture elements in the special Furniture Factory Live demonstration space. The lacquer in ques-tion is characterised by excellent clarity, good sanding characteristics, and a very short drying time (when force dried). Coated surfaces have good aesthetic and decorative qualities and optimum usability in terms of resistance to chemical and mechanical influences.

DREWZETGlued and Moulded Furniture ElementsShaped plywood made of high-grade hardwood cross veneers. The process of gluing laminated mouldings takes place in high tem-perature, in special moulds placed in hydraulic presses. Gluing process parameters, specific pressure, gluing time and temperature are control-led by an automatic control unit. The quality of bonds and the shape of elements are verified directly after the workpiece is released from the mould. The models on offer reflect the latest design trends.

KLONBeechwood BoardsThey are manufactured in 4 classes, each board side possibly belong-ing to a different class: A – uniform wood colour and structure, defects unacceptable; B – varied wood colour, no constraints on structure, up to 4 knots allowed (diameter 4 mm/m2); C – board surface comprising at least 40% heartwood strips, the whole surface must give an impres-sion of being made of heartwood, smooth transitions between heart-wood and sapwood;

D – all defects acceptable: knots, heartwood, irregular colouration, patching possible with customer consent.

A/A class beechwood boards manufactured of steamed sawn beech-wood with 8% (+/-1%) moisture content. During the first stage of processing – after steaming and drying to 8% moisture content – wood is sawn into slats that are further conditioned in order to ensure uniform moisture content. Then the slats are stacked and graded on the basis of wood structure and colour. After gluing in a high-pressure press, sand-ing (using 120 grit sandpaper), and performing another moisture check, the boards are ready for dispatch.

ADAMIK TRADE

ADAMIK company offers dust control devices in several categories, for different fields of application. The basic FT xxx SF line comprises standard bag dust collec-tors designed and applied for removing sawdust and chips in joinery shops. Our dust collectors are unique for their excel-lent quality to price ratio. The dust collector portfolio also comprises special solutions for CNC machines, edgebanders as well as special fine dust collectors. For the purpos-es of Furniture Factory show ADAMIK has

provided the following machines: FT502HSF (400 W) with a 3,75 kW motor, 1900Pa pressure at inlet, 300 mm hose connection, and 13,2 m2 filter area, as well as FT630 (400 W) with a 3 kW motor, 3000 Pa pressure at inlet, 280 mm hose connection, and 30 m2 filter area.

KLEIBERITKleiberit Flächenleim 332.0A single-component PVAC dispersion characterised by a long open time up to 25 minutes. Trouble-free application (both mechanical and man-ual), long term durability, formaldehyde-free product, pH value 5. Fields of application: bonding solid wood, natural veneers, chipboards, MDF boards, HPL boards, resin-paper films, as well as paper laminates.



PROGRAMME OF EVENTS

PROGRAMME OF EVENTS

TUESDAY, 13 APRIL

11 am-12 noon Prospects for exports of Polish furniture to the Chinese market and the potential of the Polish furniture sector

Organisers: Polish Chamber of Commerce for Furniture Manufacturers, Międzynarodowe Targi Poznańskie

Pavilion 8A, Stand 38

12 noon-3 pm Seminar: “Modern methods of timber quality assessment for sawmill purposes” Eastern Lobby, Green Room12 noon-12.30 pm Quality of coniferous timber sorted according to strength and logged in different

regions of Poland

12.30 pm-1 pm Machine sorting of timber according to strength

1 pm-1.15 pm Coffee break

1.15 pm-1.45 pm Progress in standardisation of timber quality identification

1.45 pm-2.30 pm Modern methods for non-destructive round timber research

2.30 pm-3 pm Devices for industrial quality control of round timber

Organisers: Warsaw University of Life Sciences, Międzynarodowe Targi Poznańskie Media partners: Kurier Drzewny, Drewno.pl, Drema Furnica News

10 am-3.30 pm Designing kitchen furniture. Furniture function.Organisers: Fakt Katarzyna Laskowska, Międzynarodowe Targi PoznańskiePartners: WITT KUCHNIE, BLUM, REJS, SCHATTDECOR, PFLEIDERER, HRANIPEX, IPNOTICMedia partners: Meble Plus, Produkcja Mebli, Meblarstwo.com.pl, Meble.pl, Drema Furnica News

Charm of Details – Knowledge Zone, Pavilion 7, Stand 25

4.30 pm Gold Medal and Acanthus Aureus Award Ceremony Pavilion 10

7 pm Exhibitors’ Evening

Organiser: Międzynarodowe Targi Poznańskie Please note: Admission by invitation only

Stary Browar, Piano Bar restaurant

WEDNESDAY, 14 APRIL

10.30 am-4 pm Economic Forum of the Polish Wood and Furniture Industry Polwood 2010 Pavilion 1110.30 am -12 noon Wood panel

The Polish market as a source of exports or a selling market for wood products? Beyond Europe – getting rid of European intermediaries in trading in Polish wood products beyond Europe? The EU law: presumption of guilt in trading in timber from illegal log-ging, CO2 emission trading. European standards in trading in timber and wood prod-ucts. The European sawmill industry model – should we treat gigantism? Directions of technological development in European sawmills.

12 noon Nominations to Polwood 2010 Award in the category: “Investment of the year in wood industry”. Presentation and announcement of results.

1 pm-3 pm Furniture panel

The beginning of an exodus of furniture investors to the East? The case of Ikea in Bela-rus. What else is there to do to promote the image of Polish furniture in Europe? Can we afford industrial lobbying in the EP?

The market of wood-based boards: Polish prices – European prices? Is the furniture industry closer to the euro or to the zloty?

3 pm-4 pm Nominations to Polwood 2010 Award in the category: “Investment of the year in furniture industry”. Presentation and announcement of results.

Organisers: Inwestor Publishing House, Międzynarodowe Targi Poznańskie

Partners: Institute of Wood Technology, Polish Economic Chamber of Wood Industry, Polish Chamber of Commerce for Furniture Manufacturers

Sponsors: TRADE TRANS, LEWIATAN, SKARBIEC, XELION

Media partners: Gazeta Przemysłu Drzewnego, Drzewny.pl, Meble.pl, Drema Furnica News

10 am-3.30 pm “A kitchen furniture studio that sells” Dr Marek Borowiński Organisers: Fakt Katarzyna Laskowska, Międzynarodowe Targi PoznańskiePartners: WITT KUCHNIE, BLUM, REJS, SCHATTDECOR, PFLEIDERER, HRANIPEX, IPNOTICMedia partners: Meble Plus, Produkcja Mebli, Meblarstwo.com.pl, Meble.pl, Drema Furnica News




YOU CAN’T AFFORD TO MISS IT! – 13 – 16 April 2010

10 am - 6 pm Live Furniture Factory – production of upholstered furnitureOrganiser: Międzynarodowe Targi PoznańskiePARTNERS:Technology suppliers: AEROTERM, ADAMIK TRADE, AMATEC, ARKUS, BIZEA, GERBER TECHNOLOGY, HOECKER POLYTECHNIK, HOMAG, IMA, INTEX, LEITZ, LOPING, MAKITA, POLPACK, REMA, RONDO 2, SCHUKO, SCM, SIA ABRASIVES, SWIFT SOFTWARE, TOP SOLUTION, UNISON, WEINIGComponent suppliers: AD SYSTEM, BECKER ACROMA, HENKEL, JOWAT, KLEIBERIT, KLON, DREWZETProfessional partner: Poznań University of Life Sciences, Department of Furniture DesignTechnical consultant: Prof. dr hab. Jerzy SmardzewskiProject coordination: Michał RóżańskiUnder the honorary auspices of: Polish Chamber of Commerce for Furniture ManufacturersMedia partners: Drema Furnica News, Gazeta Przemysłu Drzewnego, Meblarstwo, Drewnotechnika


Charm of Details – Kitchen from the insideOrganisers: Fakt Katarzyna Laskowska, Międzynarodowe Targi PoznańskiePartners: WITT KUCHNIE, BLUM, REJS, SCHATTDECOR, PFLEIDERER, HRANIPEX, IPNOTICMedia partners: Meble Plus, Produkcja Mebli, Meblarstwo.com.pl, Meble.pl, Drema Furnica News

Pavilion 7, Stand 25

Polish Furniture FactoryOrganizers: Stowarzyszenie DROMA, Międzynarodowe Targi PoznańskieProject partners: OSKA, GOMA, FAMAD, TECH-FA-MILER , SAFO, JAROMA , GOMAD, LAKFAM, TECHMAR, REMA, GOPOL, NADI , PROCHERA, TANELMedia patronage: Kurier Drzewny

Pavilion 5, stand 56

9th Polish Championship in Nail HammeringOrganiser: Inwestor Publishing House, Międzynarodowe Targi PoznańskieMedia partners: Gazeta Przemysłu Drzewnego, Drzewny.pl, Drema Furnica News


DREMA Skills Boot CampOrganiser: Goldman Publishing House, Międzynarodowe Targi PoznańskiePartners: WIKOMA, SCHUKO, AEROTERM, ITALCOLOR, ATLAS COPCO – KOMPRESOR SERVICE, WAGNER, KREMLIN, ARKUS, SOPUR, PLANTAG, LANKWITZERMedia partners: Lakiernictwo Przemysłowe, FAKTOR Publishing House: Meble, Materiały i Akcesoria, Drema Furnica News


Exhibition of award-winning works in the “Conjured from Wood” Competition Under the honorary auspices of: Katarzyna Hall - Minister of National EducationMedia partners: Gazeta Przemysłu Drzewnego, Drzewny.pl, Drema Furnica News


Parquet Floor Laying Workshop… liveOrganiser: Association of Polish Parquet Floor Layers


Island of Associations Pavilion 3, Stand 16

Last update: 23.03.2010. The organiser reserves the right to change the programme. The latest version is available at www.drema.pl and www.furnica.pl

THURSDAY, 15 APRIL

10 am-3.30 pm Designing kitchen furniture. Furniture function.Organisers: Fakt Katarzyna Laskowska, Międzynarodowe Targi Poznańskie

Partners: WITT KUCHNIE, BLUM, REJS, SCHATTDECOR, PFLEIDERER, HRANIPEX, IPNOTIC

Media partners: Meble Plus, Produkcja Mebli, Meblarstwo.com.pl, Meble.pl, Drema Furnica News


11 am-12 noon Supply potential of the Polish furniture sector with focus on upholstered furnitureOrganisers: Polish Chamber of Commerce for Furniture Manufacturers, Międzynarodowe Targi Poznańskie


1.30 pm-3.30 pm International Symposium of Polish Sawmill SectorOrganisers: Polish Economic Chamber of Wood Industry, Institute of Wood Technology, Międzynarodowe Targi Poznańskie

Media partners: Rynek Drzewny, Gazeta Przemysłu Drzewnego, Drewno.pl, Drema Furnica News

Eastern Lobby, Green Room

FRIDAY, 16 APRIL

1.30 pm Results of the Polish Championship in Nail HammeringOrganiser: Inwestor Publishing House, Międzynarodowe Targi Poznańskie

Media partners: Gazeta Przemysłu Drzewnego, Drzewny.pl, Drema Furnica News


2 pm “Conjured from wood” Competition resultsOrganiser: Inwestor Publishing House, Międzynarodowe Targi Poznańskie

Under the auspices of: Katarzyna Hall - Minister of National Education

Media partners: Gazeta Przemysłu Drzewnego, Drzewny.pl, Drema Furnica News


PROGRAMME OF EVENTS

Program wydarzeń



Grzegorz Piskorski, student of the Department of Wood Technology, has held the title of Champi-on of Poland in Nail Hammering since April last year. Yet, he will soon have to face those who have been working on their physical condition for months in order to defeat him. In this indus-try sports discipline, because to hammer a 3.5 inch nail in square timber is clearly a sports dis-cipline, a genuine leading edge of profession-als has emerged throughout the eight editions of championships so far. They include not only persons who work with a hammer on a daily basis, but also company owners or students. In the history of championships, there were some quite successful women’s attempts to triumph

over the disobedient nail. In other words: any-one stands a chance. All you have to do is come to the stand of the Inwestor Publishing House during Drema and Furnica, and show not only your strength and precision, but also nerves of steel. It is worth it, because as usual, winners will receive valuable prizes worth a total of 10,000 PLN.

The final and the award ceremony of the 9th Polish Championships in Nail Hammering will take place on 16 April 2010 at 1.30 pm at the stand of the Inwestor Publishing House (pavil-ion 5, stand 31) during DREMA 2010.

Prep. by (dfn)

Competition | Polish Championships in Nail Hammering

Who will beat the champion?Is there a daredevil who can dethrone the winner of the last year’s edition of the Polish Championships in Nail Hammer-ing? An opportunity for it will present itself at the Drema and Furnica fairs in Poznań.

Phot

o by

Inw

esto

r Pub

lishi

ng H

ouse

.

What you need in the competition is not only a good eye and a strong hand, but also nerves of steel.

Members of the DROMA Association of Man-ufacturers of Woodworking Machinery, Devic-es and Tools are natural persons working in the sector of woodworking machines and tools as well as a majority of Polish manufacturers of woodworking machinery and tools.

The range of machines and devices produced by the supporting members of the DROMA Association can be divided into a few groups according to their technological purpose. These are devices:

– for the sawmill industry,

– for the furniture industry,

– for joinery production plants,

– for general-purpose woodworking departments,

– for wood waste management.

Owing to joint action of members, the offer of Polish manufacturers who are members of the Associations includes design and supply of comprehensive equipment for woodwork-ing plants.

In line with project assumptions, the Polish Fur-niture Factory is supposed to present the poten-

DREMA 2010 International Trade Fair of Machines and Tools for the Wood and Furniture Industries

Polish Furniture Factory

tial of Polish manufacturers of woodworking machinery and tools as regards comprehensive solutions for technological equipment for small and medium companies of the woodworking and furniture sectors. Owing to joint action of Polish manufacturers - members of the DROMA Association, there are offers of different devices and technological lines that meet the expecta-tions of different target groups.

The project is not only aimed at presenting the potential of the Polish industry of woodwork-ing machinery, devices and tools, but also the cooperation possibilities between many enti-ties in such an undertaking, i.e. machinery man-ufacturers and suppliers of materials or com-ponents: timber, adhesives or wooden plugs. Therefore, next to Association members, Meblo-pol from Poznań will be among others involved in the project, as well. Visitors of this year’s Drema will have a chance to see live Polish machinery and devices offered by Polish manufacturers and creating a closed process line. The project will not only present live machinery, but also the technology of manufacturing a given prod-uct. This year, the final product of the Live Furni-ture Factory will be a set of bathroom furniture made of pine wood and wood-based materi-

During the upcoming edition of the International Trade Fair of Machines and Tools for the Wood and Furniture Industries „DREMA 2010”, members of the DROMA Association of Manufacturers of Woodworking Machinery, Devices and Tools will once again present a furni-ture factory live.

als. The Polish Furniture Factory will present the production process from the moment of timber sawing to the assembly of a ready-made piece of furniture in all technology nodes.

The Polish Furniture Factory will be located in pavilion 5 on a separate exhibition area next to the joint presentation of the DROMA Associa-tion members. The trade fair furniture factory will occupy about 500 sq m of exhibition area.

The following companies-members of the DRO-MA Association will be among others involved in the undertaking: OSKA, GOMA, FAMAD, TECH-FA-MILER, SAFO, JAROMA, GOMAD, LAKFAM, TECHMAR, REMA, GOPOL, NADI, PROCHERA, TANEL.

Organiser: DROMA Association, Międzynarodowe Targi Poznańskie

Project Partners – technology suppliers:

OSKA, GOMA, FAMAD, TECH-FA-MILER, SAFO, JAROMA, GOMAD, LAKFAM, TECHMAR, REMA, GOPOL, NADI, PROCHERA, TANEL

Media Partner: Kurier Drzewny



With changes in the blackFor SCM Group, the year 2009 was a time of profound changes and re-organisation. Conse-quently, this world’s leading manufacturer of woodworking and furniture production machinery can offer its customers new products within a shorter time frame and of better quality.

Last year, SCM allocated 30 million euro to trans-form its former structure into one of the largest industrial areas in Italy.

- All these changes were completed in 2010 and will result in better and faster service for our cus-tomers. We will be able to offer new models of machinery within a shorter time frame and at more attractive prices. A uniform SCM brand will become an even stronger market leader globally with its very wide range of machinery for woodworking and furniture industries– said Teresa Hauser, proxy of SCM Group Polska.

Until recently, all production plants of all brands offered within the SCM group had their own organisational structures managed by the SCM Headquarters in Rimini. Most of them were located in the Rimini and Villa Verucchio region. Therefore, it was chosen the site of a huge sin-gle woodworking machinery plant located in Villa Verucchio. The entire production process is now carried out within a single area. It begins with a new, already the second iron foundry, where workbenches to all machines in the entire group are made of iron, and a steelworks, where all main bodies and frames are then cut out of steel. One huge hall houses all numer-ically-controlled machines for metal cutting that perform machining of cast machine bas-es. There is over ten of those, and more than 800,000 euro was spent just to prepare the hall for all metal centres. The next building hous-es a huge spraying line, where all main bodies, from service machinery to over ten meters long industrial machine tools, are all automatically sprayed. Then, all machine elements are assem-bled together, and the machine as a whole is being finished in different plants for different types of machine. For example, all machining centres are assembled in one plant regardless of their brand. A separate hall was designed for electrospindle production and manufactur-ing aluminium profiles; it is also the seat of the Quality Control Department and R&D Depart-ment.

The Purchase and Logistics Department has also been restructured, thus enabling central and more effective management of materials and machinery. A single Service Department was established, divided according to machin-ery type, so all professionals were brought in one place, thus ensuring a more effective serv-ice and better information flow. The spare parts inventory has undergone a complete re-organ-isation, and as a result three large logistics cen-

PROMOTION

tres were created in different parts of the world, which will reduce both the lead time for spare parts and costs related to supplies and techni-cal service.

All these organisational changes were support-ed by image changes of the entire SCM group, which today presents a new logo of the entire group and new, uniform logotypes of all brands under the SCM Group, clearly indicating single and shared production of SCM.

More than 500,000 euro was allocated to a yet another project, namely a professional exhibi-tion centre with floor space of over 3,000 sq m, equipped with conference facilities, meeting rooms and rooms for business talks. Located in the home town of SCM Group, Rimini, it offers

new opportunities for presenting machinery to any client, both service companies and furni-ture production plants.

In the spirit of changes in the entire group, SCM Group Polska has re-organised its company, as well, introducing changes in the Sales Depart-ment. At present, sale takes place in a twofold manner: through a network of authorised dis-tributors selling machinery to service compa-nies and small production plants and through direct sales representatives who play the role of technical advisors for large production compa-nies and furniture factories. They are support-ed by the back-office of the remodeled Sales Department and, like before, our Service and Spare Parts Department.



„Conjured from Wood” is a competition addressed to students of secondary schools with woodworking specialisation. The task for competitors is to produce an original object, either from wood or wood derivatives, that has never ever been commonly made from this material. With every year, the number of com-petition works and their performance quality are higher and higher. The competition is even more prestigious owing to the fact that it is held under the auspices of Katarzyna Hall, Minister of National Education.

Participants of all six editions of the competition we have had so far prove each and every time that wood is a perfect material from which you can make basically any object while keeping all its user values. Thus, we have had a motorcycle and a sewing machine made of wood, a wood-en schoolbag and a few hundreds of other objects that defy stereotypical thinking reveal creativity of young authors and allow them to show the skills they have learnt at school in the field of selection of raw materials and produc-tion technology. In recognition of their inven-tiveness, skill and technological knowledge on wood processing, students are presented with an award, i.e. a Festool power tool worth 2,000 PLN. Additionally, the winner’s school workshop

Competition | Under the auspices of the Minister of National Education

Conjured from WoodWood is a perfect material: participants of a competition organised by the Inwestor Publishing House and Międzynarodowe Targi Poznańskie who conjure amazing objects from this beautiful substance prove this statement to be true.

You can see the exhibition of award-winning works at the stand of the Inwestor Publishing House during DREMA 2010.

„Conjured from Wood” compe-tition inspires students of wood-working schools

will be equipped in TI 115 NOVA tilting spindle

shaper worth 36,600 PLN, funded by the SCM

company, and other students from the winner’s

class together with their teacher will come to

the Drema and Furnica fairs (all expenses cov-

ered by MTP, the competition organiser).

Authors of works recognised by the competi-

tion jury will also receive gifts worth 500 PLN

each, funded by the ToolTechnic System (Pol-

ska) Sp. z o.o. company, a representative of the

Festool company. A free annual subscription

of the following magazines: Gazeta Przemysłu

Drzewnego, Meblarstwo Komponenty i Tech-

nologie and Drewno Technika will be the con-

solation prize for all schools participating in the

competition.

The Conjured from Wood competition has

a long-standing tradition and has secured itself

a strong position in the calendar of the most

high-profile industry fair event, i.e. Drema and

Furnica in Poznań. For students of woodworking

classes – to whom the competition is addressed

– it is a wonderful opportunity to present them-

selves among professionals visiting the fairs. All

works sent by students and meeting competi-

tion criteria (original, made from wood or wood

derivatives and being objects that have not

been commonly made from this raw material

yet) will be presented at the exhibition at the

stand of the Inwestor Publishing House that

can be visited during all fair days from 13 to 16

April. The competition final and the award cer-

emony of its seventh edition will take place on

16 April at 2.00 pm at the stand of the Inwestor

Publishing House (pavilion 5, stand 31).

Prep. by (dfn)Phot

o by

P. P

iosik

Phot

o by

P. P

iosik



DREMA FURNICADREMA FURNICAF O R U M B 2 B B R A N Ż Y D R Z E W N E J I M E B L A R S K I E J

POZNAŃSKI MAGAZYN TARGOWY WYDANIE SPECJALNE ISSN 1230-8994 (06) MARZEC 2010 NAKŁAD 45.000 EGZ.

Media patronage:

Partners:

W Partnerach teraz powinni by?: Blum, Pfleiderer, Witt Kuchnie, Hranipex,Rejs, Schattdecor, Ipnotic.

The CHARM OF DETAIL accompanies the FUR-NICA International Trade Fair of Components for Furniture Production to be held on 13-16 April in Poznań. The fair will provide a lot of use-ful information on newly launched products showcased by leading companies – suppli-ers of different sectors of furniture production: WITT KUCHNIE, BLUM, REJS, SCHATTDECOR, PFLEIDERER, HRANIPEX and IPNOTIC. This year, the event is held under the auspices of edito-rial boards of Produkcja mebli and Meble Plus industry magazines and Meble.com verti-cal portal, as well as the editor of Meble.pl ver-tical portal.

At the upcoming edition of the CHARM OF DETAIL exhibition we will plumb the mysteries of kitchen furniture. The design of fitted kitch-ens in the exhibition area has been developed so as to present effectively the best solutions in components available on the market. The exhi-bition organisers very much want to showcase a couple of functional areas with fitted kitchens with focus on today’s opportunities created by components available on the market.

The concept of the architectural and artistic lay-out of the exhibition, developed by a designer who collaborates with the organisers, is aimed at providing insight and inspiration for profes-sional visitors.

Visiting the Charm of Detail will also be an opportunity to take part in seminars held in the Knowledge Zone. This year, every day of exhibition events will be dedicated to a differ-ent target group. Each and every participant of seminars will receive a copy of a unique guide with information on solutions presented at the exhibition.

FURNICA 2010 International Trade Fair of Components for Furniture Production

With outstanding collections of kitchen furniture in mind Kitchen from the inside – this is a very tricky title (a wordplay in Polish: Kuchnia od kuchni) of the upcoming edition of the CHARM OF DETAIL exhibition, which is addressed mainly to kitchen furniture manufacturers, kitchen studios, and in particular to designers and sales advisors. The area has been divided into two zones: Exhibition Zone and Knowledge Zone.

For kitchen furniture manufacturers (including kitchen studios), the organisers have prepared a series of lectures and seminars devoted to design and technology aspects of kitchen fur-niture design and production. At the end of the day, there will be a panel discussion (attended by media) on the topic: design versus function-ality. The discussion will be attended by compa-nies – exhibition partners.

The following day will include events devoted to issues of concern for designers and interior architects. Series of presentations held mainly by exhibition sponsors will give listeners insight

into the latest tech-nological solutions in the field of fittings for kitchen furniture.

The series of events will end with a work-shop on kitchen furni-ture sales techniques. This professionally pre-pared panel will be attended by people professionally involved in advisory and sales, and they will receive a certificate of partici-pation at the end.

More information: www.drema.pl/en | www.furnica.pl/ en




KITCHEN – BEHIND THE SCENESDISCOVER NEW OPPORTUNITIESSEE WHAT’S BEHIND KITCHEN FRONTS

EXHIBITION • THEME SEMINARSA DIFFERENT LEAD THEME EVERY DAY

EXHIBITION ACCOMPANYINGTHE FAIR FURNICA

13-16/04/2010 POZNAŃ, POLAND

International Trade Fair of Components for Furniture Production

www.furnica.pl/en

Media partners:

Partners:



For many years, Schattdecor has set trends and introduced bestselling designs to the market that help its customers land a top-notch position. Such decors as Bavaria Beech, Red Alder, Oxford Cherry, Sutter Oak, Twist, Virginia Wal-nut, Wallis Plum or Coimbra, the latest blockbuster, are just a few examples of the company’s market success. They are characterised by continuity and guaranteed quality. For over 10 years, Schattdecor has described trends in furni-ture and floor industry, providing its recipients with advi-sory on developing future-oriented foil-finished surfaces.

This year’s Schattdecor trends show three directions in interior decora-tion. However, they all have one theme in common: they focus on nature, being the source of inspiration and a model for developing new design solutions.

In the FOR ALL trend, natural elements contrast with industrial materials. In FOR US, hand-made objects are combined with modern design that reproduces natural structures, whereas FOR ME offers a unique dialogue between nature and artistic objects made by human hands..

This style in furniture offers simplicity and a light feel. Carefully chosen furnishings, materials and colours add up to a look of elegant simplicity.

Schattdecor at Furnica 2010: nature as the designers’ focusDuring Furnica 2010 scheduled for 13.-16.04.2010 in Poznań, Schattdecor will present many new designs and exceptional foil products at its stand in hall 8.

At Schattdecor stand, you will also find new technologies, in particular in finish foils. New, innovative pre- and post-impregnated foils, i.e. Smartfoil Real, Postfoil 3D and Smartfoil 3D, are perfect for modern furniture and door surfaces.Smartfoil Real, Smartfoil- and Postfoil 3D foils mean a genuine revolution for foil-finished surfaces. Decors capture the look of real veneer and they

feel like it, too!! And they do so from job to job, keeping their perfect looks from first day on.Recognition of design trends and a guarantee of top quality: this is a pre-requisite for success! Any furniture manufacturer who wants to provide their customer with a perfect product is aware of that. See it, touch it, feel it – Schattdecor helps do that!

FOR ALL

Dąb Canterbury

FOR ME

Orzech Montreux

FOR US

Wenge Arusha

FOR ALL

Kitchen, a very creative space, conducive to communication and workshop-like, is becom-ing the centre of family life. Large worktops actually recall workbenches. The most popu-lar decors are untreated limed oaks. They are combined with stone, stainless steel, glass and innovative materials, which gives interior a modern look. White, concrete and metal col-ours dominate, as well as pale wood, from deli-cate browns to greys. Untreated natural-looking wood contrasts with smooth industrial surfac-es. The result is a light new feel to the interior.

FOR US

This trend is wonderful for living rooms, being a place for relaxation and a venue for social meetings. Furniture forms are light and angu-lar. Hand-made and eco-friendly objects are styled with modern and light design. This style involves an interplay of different forms that cre-ate a well-though-out and harmonious whole. Natural materials such as wool, wicker or leather are combined with pale, natural-coloured wood, while furniture items with a solid, artisan-craft-ed look give the final touch to the interior. The range of woodgrain decors includes patterns that reproduce conifers and such hardwood as birch, maple, ash or beech as well as natu-ral oak, creating a very warm and homely feel.

FOR ME

This trend emphasises individual character of its user and appears first and foremost in bedrooms and bathrooms. It is elegant and subtle. An indi-vidual look is obtained through creativity and classic charm, as opposed to opulent chic. The interior feel is created by appropriate surfaces and objects, such as hand-made unique items. Dominating in this trend are walnuts and trop-ical hardwoods with delicate structure, in light to dark-brown hues, offset with gold or olive.

Schattdecor Sp. z o.o., ul. Sowia 10, PL 62-080 Tarnowo Podgórne, Phone +48 61 81 66 600, Fax + 48 61 81 66 700 Plant in Głuchołazy, ul. gen. Andersa 1, PL 48-340 Głuchołazy, Phone + 48 77 40 85 500, Fax + 48 77 40 85 505 www.schattdecor.com

PROMOTION



The Poznań-based DREMA is the most high-pro-

file trade fair for the woodworking and furniture

industries in this part of Europe. FURNICA Inter-

national Trade Fair of Components for Furniture

Production, held concurrently, is by all means

a complement to the thematic scope of this

popular event focused on cutting-edge process-

ing technologies. Both prestigious events pro-

vide invaluable insight into the latest solutions

on the market and the condition of this indus-

try in Central and Eastern Europe.

This year, an interesting fair exposition will be

provided by over 800 top global companies on

the area of more than 30,000 sq m. Exhibitors

come from 22 countries: Austria, Belgium, Chi-

na, Columbia, Czech Republic, Denmark, Esto-

nia, France, Germany, Hungary, Italy, Luxem-

bourg, Netherlands, Poland, Russia, Slovakia,

Slovenia, Spain, Sweden, Switzerland, Turkey

and USA. Organisers expect DREMA and FUR-

NICA 2010 will attract 22,000 professionals from

Poland and abroad, all actively looking for busi-

ness development paths. New products from

exhibitors are not the only reason for visiting

Poznań. The organisers want to inspire profes-

sional visitors, encouraging them to visit special

presentation areas and take part in industry-

focused seminars. One of such meetings that

should be particularly recommended to rep-

resentatives of the sawmill industry is a semi-

nar entitled „Modern methods of timber quality

assessment for sawmill purposes”. A presenta-

tion panel held under the auspices of the edi-

torial board of Kurier Drzewny and Drewno.pl

vertical portal is being prepared together with

the Warsaw University of Life Sciences. Seminar

participants will focus on the quality of conif-

erous timber sorted according to strength and

logged in different regions of Poland. Machine

sorting of timber according to strength is also

an interesting topic. Experts will discuss progress

in standardisation of timber quality identifica-

Events | DREMA 2010 for sawmill industry

Presentation of modern methods of timber quality assessmentDREMA International Trade Fair of Machines and Tools for Wood and Furniture Industries, scheduled for 13-16 April and held under the slogan of „Technologies of tomorrow”, involves not only an arresting offer from key suppliers but also an inter-esting industry-oriented programme.

tion and modern methods for non-destructive

round timber research.

For small, medium and large woodworking and

furniture production companies, using state-of-

the-art technologies is the way to achieve com-

petitive advantage as regards operational costs

and the quality of final products. Therefore, the

DREMA fair is a much waited-for event for the

industry in Central and Eastern Europe, and has

More details about the seminar at: www.drema.pl

Opening hours:

Tuesday – Thursday: 9.00-17.00 Friday: 9.00-16.00

Fair Entrance:

Eastern Entrance – ul. Głogowska Western Entrance – ul. Śniadeckich Northern Entrance – ul. Bukowska

DREMA Pavilions: 3, 3A, 4, 5, 9, open area

FURNICA Pavilions: 7, 7A, 8, 8A

a commanding position in the calendar of pro-

fessionals looking for the best development

directions for their companies. The recommen-

dation from EUMABOIS European Federation of

Woodworking Machinery Manufacturers proves

this trade fair is a top-notch event. A visit at the

fair in Poznań is a unique chance in a year to

explore the potential of live machinery.

Poznań – it is worth being here

Complementary DREMA and FURNICA trade

fairs are among the top world-class events

addressed to professionals from the wood-

working and furniture industries. Owing to over

100 new products and international premieres

along with interesting conferences and presen-

tation areas, it is really worth to be there. The

organisers have ensured highly comfortable

conditions of your stay on-site: for registered

visitors, there is free admission and Rest&Meet

Points at the fairgrounds, where you can unwind

and enjoy free refreshments. Międzynarodowe

Targi Poznańskie cordially invites you to register

on-line at www.mtp24.pl and on-site, direct-

ly at ticket offices. For non-registered visitors,

tickets are available at a price of 60 PLN (single

ticket) and 90 PLN (four-day ticket). If you come

by car, you will be happy to find a supervised

car-park (ul. Matejki) just 350 m away from the

fairgrounds. A convenient trade fair location in

the direct vicinity of the railway station and the

Ławica airport is good news for all those who

prefer alternative ways of travel.



A.D. SYSTEM Sp. z o.o.Pavilion 4, stand 22

Duocoll 1014PVAC dispersion adhesive for bonding paper foils, laminates and natural veneer to wide sur-faces of wood-base materials. Single application: 30-50 g/m2. Excellent sur-face quality after veneering. The adhesive does not contain formaldehyde. It fulfils the require-ments stated in IOS MAT 0003 and 0069.

AIRTEC® A/S Pavilion 3, stand 43

Airtec® EasyLineAirtec® EasyLine high-pressure air h u m i d i f i c a t i o n system is targeted at the small and middle size com-pany. Optimized energy consump-tion and mini-mized operational cost ensures the correct air humid-ity. The system is supplied with an integrated fre-quency controlled pump system, PLC

control, touch screen display, Service Monitor-ing system and Flow Control. Airtec® EasyLine supplies from 12-600 litre of atomised water per hour in up to 3 different zones.

Airtec® HydroLineAirtec® HydroLine high-pressure air h u m i d i f i c a t i o n system is targeted at the large and medium size com-pany. Optimized energy consump-tion and mini-mized operational cost ensures the correct air humid-ity. The system is supplied with an integrated fre-quency controlled

pump system, PLC control, touch screen dis-play, Service Monitoring system and Flow Con-trol. Airtec® HydroLine supplies from 24-700 litre of atomised water per hour in up to 8 differ-ent zones

AKE Polska Sp. z o.o. Pavilion 5, stand 19

PLT Ultra wood shavings grinder The newest com-pact PLT Ultra grinder for wood shavings ensures smooth cut edges while cross cut-ting chipboards covered with soft coatings such as plastic film, paper, etc. The constant kerf width is main-tained till the last

sharpening operation. The design of the machine has been upgraded. The division into rough and fine working sections combined with reduced vibration level have resulted in excellent cutting quality.

Soft-Cut circular saws for chipless cuttingLatest generation of saws for material cutting eliminate chips and dust generation while maintaining long service life. They are suitable for cutting insulating materials: mineral, cellu-lose materials, glass and stone wool, paper,

cardboard, chip-boards, cement boards and foam materials.

APATOR CONTROL Sp. z o.o. Pavilion 3, stand 10

Digistart IS - Digital starting system for three phase motors

It replaces old star-delta switches. Thanks to controllable current limiting it eliminates cur-rent surge during direct starting of engines. Available in the execution of up to 1600 A, 208-690 V three-phase power systems. The system has a built-in by-pass contactor. Independent-ly from the smooth start system the drive has an internal star-delta motor switching system.

ARKUS Pavilion 4, stand 27

Manual electrostatic gunThe world unique design of a gun for spraying

of water-base paint in the electrostatic field. It eliminates the necessi-ty of system insulation. The electrostatic field is generated outside the gun. Individual paint drops are charged and do not lose their charg-

es. The additional advantage is much lower field intensity that keeps the paint spray away from auxiliary elements such as hangers, covers, structural components of paint booths, etc. Graco Merkur paint pumps

Merkur pump family includes over 300 pump units. This is a technolog-ical and structural leap into a new world of quali-ty and functionality. Their advantages: smooth run-ning, lack of pulsation, automatic stop when material shortage occurs, paint consumption mon-itoring, lack of freezing effect, ten times longer motor life, easy cleaning.

Graco Husky 1050 membrane pump

Husky 1050 mem-brane pumps are the 1 inch pump fami-ly. A new membrane design ensures the pump delivery increased by 30% and five times lon-ger durability. The pulsation effect has been reduced. Struc-tural materials: stain-

less steel, aluminum, polypropylene, PVDF, Has-telloy. The DataTrak system has been applied to count the pumped material and stop the pump automatically when material shortage occurs.

ARTEX Artur MakiolaPavilion 3, stand 20

VACUUM PRESSA VPF-2Vacuum press for coating panels with PVC film and natural veneer.

ATMO Sp. z o.o. Pavilion 3, stand 28

Hand-operated pneumatic APACH hammerThe hand-held pneumatic hammer designed for operation without a nail magazine. Suitable for any size of nails.

NOVELTIES



BECKER Polska Sp. z o.o. Pavlion 3, stand 5

VTLF 2.250 vacuum pump

A new VTLF 2.250 vacuum pump. Pump deliv-ery: 250 m3/h, pressure: 200 mbar (Abs), pow-er: 5.5/6.4 kW, 50/60 Hz. Increased filter area: 22,000 cm2, red filter and transparent hous-ing as standard equipment. Noise reduction: 77 db(A) at 50 Hz / 79 db(A) 60Hz. Optimum location of lubrication pipes and a non-return valve. The transparent housing as standard equipment. Less components, compact shape, lower risk of leakage.

BIZEA Sp. z o.o. Pavilion 3A, stand 15

BeA 901 DC pneumatic nailer

A new pneumatic BeA 901 Dc nailer is designed for nailing wooden elements with the use of wire coil nails. Nails: 2.5 to 3.3 mm in diameter and 50 to 90 mm long.

Pneumatic BIZON tools for C-rings

A new group of BIZON pneu-matic C-ring tools intended for the manufacturers of

upholstered furniture, mattresses and car seats. We present three models of tools for CL20x18 type clips that vary in the nose length (45, 61, 87 mm) as well as the tool for CL20x16 type clips.

The stand for connecting Georgian bars for doors and windows

The stand for connecting wooden or plastic Georgian bars for doors and windows. A mov-able pneumatic head is installed over the work-ing table to force V stitches into the bar con-nection points. The laser indicator shows the connection point.

BeA 145/32-178 pneumatic stapler to secure T-nutsThe BeA 145/32-178 stapler has been provided with an attachment to allow quick and precise forcing of two 140/15 BIZON stitches to secure the T-nut inserted in chipboard or ply-board.

BORAN s.c. Pavilion 3A, stand 17

SONPg-640a tool grinderThe previous version of the SONPg-640 grinder has been equipped with devices to work in an automatic cycle. The tool grinder operates in such a way that the grinding head automatical-ly comes in contact with the sharpened knife.

SONP-CHa tool grinder The previous version of the SONP-CH grinder has been equipped with devices to work in an automatic cycle. The tool grinder operates in such a way that the grinding head automatical-ly comes in contact with the sharpened knife.

SOG-125/Pa tool grinder The previous version of the SOG-125/P grinder has been equipped with devices to work in an automatic cycle. The tool grinder operates in such a way that the grinding head automatical-ly comes in contact with the sharpened knife.

CEFLA Polska Sp. z o.o. Pavilion 9, stand 1

‘MITO’ automatic spray painting machine‘MITO’ automatic spray painting machine is used for applying stains and paints on profiled furni-

ture components. Transport tape with patented system of backward rollers guarantees paint recovery. It is possible to install a maximum of four paint circulations. The JIT system makes it possible to paint short series of elements and to change colors quickly. The machine is strongly recommended for the application of water-based paints and water-based UV products..CEHISA Pavilion 5, stand 4

Automatic BRYKO edgebander

A Teflon coated glue tank and a digital thermo-stat to maintain working and resting tempera-ture. The automatic feeding unit for edge band-ing in strips and rolls 2 mm thick. The motor pressure roll and one extra roll with a numerical counter to measure the edge banding thick-ness. The double saw unit for precise edge trim-ming has been equipped with a high-speed motor. The top and bottom milling unit has got vertical and horizontal tracers controlled by numerical counters.

COMPACT 7.2. automatic edgebander equipped with the panel pre-milling unit

A panel pre-milling unit with two diamond cutters. A Teflon coated glue tank and a dig-ital thermostat to maintain working and rest-ing temperature. An automatic feeding unit for edge banding in strips and rolls 2 mm thick. A motor pressure roll and two extra rolls with a numerical counter to measure the edge banding thickness. A double saw unit for pre-cise edge trimming equipped with a high-speed motor. The top and bottom milling unit with vertical and horizontal tracers, controlled by numerical counters. The R2 edge scraping station controlled by numerical counters. The edge polishing station.

NOVELTIES



SYSTEM 5P automatic edgebander equipped with the panel pre-milling unit

A panel pre-milling unit with two diamond cutters. A Teflon coated glue tank and a dig-ital thermostat to maintain working and rest-ing temperature. An automatic feeding unit for edge banding in strips and rolls 2 mm thick. A motor pressure roll and two extra rolls with a numerical counter to measure the edge banding thickness. A double saw unit for pre-cise edge trimming, equipped with two high-speed motors. The top and bottom milling unit with vertical and horizontal tracers, controlled by numerical counters. The edge polishing sta-tion. LCD control panel.

CEHPOL Sp. z o.o. Pavilion 5, stand 1

THEMA 3800 panel sawing machine

A robust steel frame made up of profiles used in CNC machines to obtain the highest work-ing accuracy. The pressure beam moved by two pneumatic cylinders ensures adequate pres-sure on the panel pack at both sides of the cut-ting line. The saw carriage travels on two linear guide ways to ensure the best weight distribu-tion and lowest friction. The rate of travel of the sawing unit is controllable for the best selection of the required cutting speed. The position of the undercutting unit towards the main saw is easily adjustable. The pusher is moved by means of a rack-and-pinion mounted at the top of the side beam. The pusher moving motor is the central part of the pusher so that the rack gears are connected by two equal shafts to guarantee high accuracy and repeatability. Sev-en pneumatic grips have been placed at a regu-lar distance to hold the panel pack perfectly.

COSMA – Borstelfabriek Holland Pavilion 5, stand 21

Sanding head with replaceable work-ing elementsCosma – Borstelfabriek Holland has launched a newly designed brush system for wood sand-ing machines. In the earlier systems working

elements, i.e. a brush and abrasive paper, were placed in one lamella. A new system makes it possible to replace only used working elements, i.e. single strip of brush or abrasive paper, with no need to change the head. The Cosma head allows using various thick-nesses of abrasive paper placed in the same head.

DEERFOS Europe Sp. z o.o. Pavilion 4, stand 14

SA331 Coated Abrasive Discs on PE BackingAbrasive discs on PE film offer excellent abra-sive properties along with optimum durabil-ity of the backing material – better than other abrasive materials.Special open top coat prevents clogging and improves abrasive performance.Compared with conventional solutions, the thermally enhanced top coat ensures longer product life.Unlike paper backing, PE film is water-resistant and non-breakable.Available grits: P40 to P2000.

DIMEN s.c. Open fairgrounds, sector 03 stand 16

Gas Heating Systems for Wood Drying PlantsThe first time on the Polish exhibition will be presented the newest technology of wood dry-ing and pallets treatment. The heating system is natural or liquid gas fired. Gas heating systems are new on the Polish market due to low invest-ment cost, high efficiency, low operating costs and significantly shorten the drying time.

ELCON MACHINEFABRIEK BV Pavilion 5, stand 6

ELCON 215 D Vertical Panel Saw

Designed for cutting chipboards, MDF, plywood, solid wood and plastics, the saw enables cut-ting workpieces in both vertical and horizontal alignment. The robust structure of the machine allows to process several boards simultaneous-ly, also handling particularly heavy workpieces. The saw features a precision scale to facilitate cutting in both vertical and horizontal position, as well as a steel bar guide which helps cut nar-row pieces in the horizontal position.

Fabryka Maszyn do Drewna „GOMAD” Sp. z o.o. Pavilion 5, stand 55

FD-2/2 Bottom Spindle MoulderFDW-2/2 Tilting Bottom Spindle MoulderDrawing on the past experience of moulder production and responding to our customers’ expectations, we have introduced 6 spindle speeds: 3000; 4000; 5000; 6000; 8000 and 10000 rpm. This modification offers a wider possibil-ity of optimising processing parameters, which will result in improved quality and precision of moulding operations.

FELDER Group Polska Sp. z o.o. Pavilion 5, stand 61; 62; 65

Plan 51L Planer-Surfacer from FORMAT-4

Plan 51L offers surface planing width of 510 mm and a planer table with a total length of 3000 mm. The 4-knife cutterblock of the FORMAT-4 system enables fast replacement of knives without the need for additional adjustments. High operating comfort is ensured by a pro-fessional planer fence with an aligning fence, planer adjustment system with lateral prismatic guide rails, as well as optional electric system for infeed table height adjustment.

Perfect 710 e-motion Edgebander from FORMAT-4

Perfect 710 e - m o t i o n edgebander allows to process 8-60 mm thick workpieces using coiled

and strip material with thicknesses ranging from 0.4 to 10 mm. The machine is operated via a control panel with a 10.4” colour touch screen. Processing units are positioned and controlled electronically. As a standard, the machine is fit-ted with 7 processing units, including a corner-rounding unit, while 4 slots are left free for addi-tional tools.

Profit H30 CNC Machining Centre from FORMAT-4Profit H30 is a CNC drilling and moulding centre designed for large-scale production of furni-



ture, doors and windows. With a working field of 4800 mm (X-axis) by 1360 mm (Y) by 130 (Z), and up to 50 slots for tools, p r o c e s s i n g cycles can be effectively opti-mised. The solu-tion is supported by the state-of-the-art user-friendly WoodFlash software.

Firma Konsultingowo Handlowa TILIA Tomasz Harajda Pavilion 5, stand 10

Olsen & Stroh AS Automatic Coat-ing Machine / Robopaint Compact 1000/1300A robust Danish automatic machine fitted with cutting-edge components. User-friendly 10’’ touch-screen control panel. The machine is also equipped with a work area scanner, which auto-matically detects the workpiece, thus ensuring reduced coating consumption.

GASSTECH Przedsiębiorstwo Produkcyjne Sp. z o.o.Pavilion 3, stand 28

EKOMULTIKS Saw for Material-Saving Lengthwise Cutting of WoodEKOMULTIKS saw for lengthwise cutting of wood, featuring a special solution that has nev-er been applied before. Next to each tooth there are additional sweeping knives mounted on the blade body, which effectively prevents wood chips from getting between the blade and the workpiece, thus increasing overall cut-ting efficiency. Moreover, this structure allows to decrease tooth width, ensuring significant material savings during wood cutting.

HEDER – Viscat Fulgor SRL Pavilion 3, stand 78

Bandsaw flash welding machine, type FW-505Py NEW. 10-60 mmFlash butt welding machine. Totally electroni-cally controlled it carries out automatic welding. The annealing cycle is controlled by an optical pyrometric sensor with a laser pointer allowing a high-precision measurement of the annealing temperature and to optimize this cycle. Greatly renewed, especially in its clamping group, it can bear high workloads. Shear included.

Automatic setting machine for band-saw blades, type SV-250.40-250 mmAutomatic work cycle. Possibility to choose the type of setting: left-right or left-right-straight. Adjustment of the feed pitch of the setting high and the tooth bending degree. High-yield in very little work space.

Sharpening machine with setting machine, type AM 70 N.Sharpening machine with setting machine.

Automatic work cycle. Can sharpen band saw and circular saw blades and set band saw blades only. Can sharpen all triangular profiles. Its ver-tical design was studied to require little space and bear high workloads. Solid and reliable.

HOTLEC GmbH & Co. KG Anlagenbau zur HolzbearbeitungPavilion 3, stand 69

Cross – cut lines for long logs with synchro-roller technology and stopper table

Advantages of technology: safe log feeding to cross-cut saw, centring of log before cut-ting saw, high acceleration and braking per-formance due to spike rollers, sensing of log diameter with cutting recommendation, exact positioning of logs to saw = up to 30 % higher positioning speed.

IMA Polska Sprzedaż i Serwis Sp. z o.o. Pavilion 5, stand 16

BIMA CUT 310 V 4-Axis CNC Machining Centre

IMA CUT V is a universal CNC machining centre with an automatic in-feed table for panel load-ing. Designed for unattended production of fur-niture elements, with automatic units carrying out such operations as: routing furniture form pieces in full-size boards, moulding straight-line and curved profiles, vertical and horizontal drill-ing, straight and curved-line edgebanding, as well as automatic feeding of furniture elements onto the unloading conveyor. The machine is supplied with IMA WIN CAD software. Produc-tion capacity ca. 300-350 elements per shift.

Advantage 200 Single-Sided Edgebanding Machine

Developed for small and medium-sized fur-niture production companies running two or three shifts. All processing units are shielded by

lifting covers, which improves working safety and significantly reduces the noise of the run-ning edgebander. Advantage 200 is a machine with a compact body length ranging from 3700 mm to 6200 mm, depending on the equipment version. Importantly, this line of edgebanding machines is characterised by high feed speeds – from 20 to 30 m/min – and a top pressure track to keep the workpiece firmly on the table.

Advantage 300 Single-Sided Edge-banding Machine

The Advantage 300 line of edgebanders is IMA’s new addition to the family of compact standard edgebanding machines, suitable for using thin edging materials (from 0,3 to 3 mm thickness), fitted with a corner copying unit. Advantage 300 is a machine with a compact body length ranging from 4200 mm to 5200 mm, depending on the equipment version. Importantly, this line of edgebanding machines is characterised by high feed speeds (from 20 m/min), a top pres-sure track to keep the workpiece firmly on the table, and a possibility of rounding the corners of workpieces with up to 60 mm thickness.

INTOREX S.A. Pavilion 5, stand 5

Intorex MV-3Automatic machine for boring and inserting bushes and screws. MV-3 is fitted with a rotary table with 3 work cycles: manual load-ing and unloading, boring, bush/screw inserting. Automat-ic loading of bushes or M6, M8 and M10

screws (the vibrator is not included in standard price; maximum loading capacity is ca. 40 bush-es or 15 screws). Capacity ca. 900 pcs/hour. Pos-sibility of using the boring unit exclusively.

JAROMA S.A. Pavilion 5, stand 60

CROSS-3800 Panel SawThis panel saw guarantees excellent performance and high cutting precision. It features a touch-screen control panel with a cutting optimisa-tion system. Variable carriage feed speed – from 5 to 35 m/min. Working table dimensions: 3800 x 2100 mm. Cutting height: 55 mm. Pusher feed speed: 1-40 m/min. 6 grippers and a pneumatic feed table supplied as a standard.

NOVELTIES



WG-410 Basic Planer-ThicknesserCombined machining centre performing both planing and thicknessing functions. Fast and simple changeover. Cast iron tables, tilting guide fence, and a 4-knife cutterblock guar-antee high quality processing. Working width: 410 mm.

COMPACT DNW+ Edgebanding MachineThe best equipped representative of the Com-pact line of edgebanders, designed specifical-ly to carry out complex technological proc-esses in a limited space. Functions available as a standard: panel pre-routing, excess material trimming, veneer moulding, through-feed cor-ner rounding, as well as scraping and polishing. Touch-screen control panel.

DSVC-40 Basic Planer-SurfacerBudget version of the long-established surfacer. Cast iron tables, tilting guide fence, and a 4-knife cutterblock guarantee top quality processing. Drilling attachment available as an option.

DMUB-NX Circular SawDescendant of the well-known DMUB Atut model, priding itself on richer equipment. Motorised raising/lowering and tilting of the main saw available as a standard. Optional func-tions include: electro-motorised guide fence, scoring saw “parking” option, and programming of cutting parameters. Cutting height up to 118 mm, tool speed adjustment carried out at the working table.

SPEED WFN Edgebanding MachineGold medallist of the previous edition of DREMA, now offering a fast-changing glue con-tainer, and a rotational speed of the moulding unit increased to 18000 rpm. Workpiece height up to 80 mm. Feed speed: 10 and 15 m/min. Wide range of additional accessories.

KLINGSPOR Sp. z o.o. Pavilion 4, stand 28

PS 73 WK Self-Fastening Abrasive Discs for Power Tools

Designed for processing paint, varnish, filler and plastics with the use of power tools, especially in the automotive sector, as well as in the woodwork-ing and furniture indus-

try. Special corundum grit guarantees high grinding efficiency while maintaining consist-ent depth of roughness across the surface. The additional stearate coating minimises clogging.

PS 15 F Wide Endless Abrasive BeltsA highly efficient product applied for processing wooden

workpieces with high resin content using belt grinders. Antistatic properties of the paper back-ing combined with resin as the bonding agent both prevent clogging and help extend prod-uct life. For the furniture sector we recommend PS 15F endless paper abrasive belts with the most popular dimensions: 1350 mm x 2620 mm.

KREMLIN REXSON Polska Sp. z o.o. Pavilion 4, stand 34

Xcite GunThe new design of the lightweight Xcite™ gun ensures greater operating comfort. Thanks to the standard swivel fitting, the gun is extreme-ly ergonomic when items with complex shapes are sprayed. Ultra-light trigger ensures effort-less operation, helping increase efficiency. The Xcite gun is made of the highest quality com-ponents, guaranteeing reliable performance.

LIMAB Pavilion 3A, stand 32

Panel Profiler

Limab PanelProfiler is the market leader in non-contact thickness measuring of all types of pan-els. Soft, thin or with rough surfaces, like Ply-wood, where traditional contact measuring systems will not work properly, are measured with high accuracy. The system works nearly maintenance free (no rollers cleaning, no fre-quent calibrations needed), even placed direct-ly after presses and sanders. Easy to use system software with recipes, graphical display, log-ging and alarms. PanelProfiler comes in differ-ent versions with a freely selectable number of measuring positions.

Board ProfilerSingle Point and/or Multi Point System for wane and deformation measurement of boards and planks. Optimisation of cutting for trim-mers. Reject/turning before edgers. Deforma-tion measurement. Thickness and width meas-urement, multiple tracks. Because the system is modular it can be adapted to every specific demand, which gives optimum performance and at the same time a cost effective solution. The system can easily be installed without any costly mechanical rebuilding of existing line. Internal communication in the system is by CAN-bus, which minimizes cable connections and simplifies installation. Externally the system as standard communicates via serial interface RS232 and TCP/IP is also possible.

The basic component in the system is our developed laser gauge PreciCura. It uses the latest digital and optical laser technology with advanced build in microprocessor (DSD Digital Sygnal Processor) and high resolution CCS-array optical receiver.

LUKA P.H.U. Pavilion 3, stand 35

LUKA XS 700 Control Processor for Wood Drying PlantsNewly developed and released for production in 2010, the control processor for wood drying plants comprises the multi-output XS 700 pro-grammer and a measurement block for analys-ing two temperature values, air humidity and wood moisture – at 5 different points. The prod-uct draws on LUKA’s 15 years experience. Differ-ent data characteristics for each wood species are stored in the processor’s internal memory. Using RS 485 data transmission network and SUSZMON 2 software, the system supports two-way data transfer with the central PC and the Internet, also being capable of connecting with mobile phones thanks to the GSM mod-ule.

MAKITA Pavilion 3, stand 72

AF201Z PNEUMATIC NAILER

Lightweight (0.9 kg), compact and extreme-ly handy. Ideal for finishing works, e.g. cabinet work. Magazine capacity: up to 100 pins with lengths between 12 and 25 mm, and diameter of 0.6 mm. Operating pressure range: 3.9 – 6.8 bar; recommended compressor: AC640.

BST221RFE 18 V BATTERY-POWERED STAPLER

The aluminium magazine ensures smooth loading and feeding of staples. Magazine capacity: 98 sta-ples with lengths of 10/13/16/19/22

mm, 0.6 – 1.2mm thickness and 10mm width. The device offers depth control adjustment depending on staple width (thickness), and optional serial staple release. Ergonomic rub-



berised grip handle ensures increased control and comfort. Supplied in a case with a charger and a spare 18 V/3.0 Ah battery.

LS1016 MITRE SAW

DXT (Deep and eXact Cutting) technology: 3-stage reduction gear and retractable rear blade guard guarantee more effective cutting of crown mouldings and skirting boards. This compound mitre saw features a high-precision blade with a dual angle adjustment mecha-nism, and a mitre range of 60 degrees right and 52 degrees left. Operation is comfortable thanks to the easy-to-read bevel angle scale with large graduations. Bevel range of 45 degrees right and left with positive stops at 22.5, 33.9, 45 degrees (left and right), complemented by a quick and accurate mitre angle lock with positive stops at 0, 15, 22.5, 31.6, and 45 degrees. Extremely long cuts in one pass – up to 310 mm.

RP2300FCX PLUNGE ROUTER

Main fea-tures of this device i n c l u d e : p o w e r -ful opera-tion, pre-cise plunge d e p t h adjustment in 0.1 mm increments at 3 differ-ent depths,

increased safety ensured by an electronic brake, and longer tool life thanks to ball bearing con-struction at the drive section, accompanied by air maze filters and fans. Twin LED light with afterglow function helps reduce the shadow cast on the workpiece by tool heads. Ergonom-ically shaped, rounded handles are ideally suit-ed to the operator’s hands.

18V BTD144RFE BATTERY-POWERED IMPACT DRIVER

3-speed impact driver with a 18V/ 3.0Ah Li-ion battery. With a maximum torque of 160 Nm, it handles machine screws with diameters between 4 and 8 mm, 5-14 mm standard bolts, and 5-12 mm high tensile bolts. The device is powered by a brushless DC motor, which helped extend run time on a single battery charge. The work is additionally facilitated by a perfectly-shaped, ergonomic grip. This model also features a LED light with afterglow, and LED battery charge indicator. The device is supplied in a case with a charger and a spare battery.

MEBEL ART Sp. z o.o. Pavilion 5, stand 11 ; Pavilion 3A, stand 21

FRE 317S Corian RouterA router designed for levelling out joints formed in the corners as sections of Corian worktops are connected. 1800 W motor guarantees per-fect performance.

EB 40 Automatic Hot Melt Edge-bander

Edgebander for edging materials up to 3 mm thick. It features such functions as: temperature control, routing, trimming. The edgebander also has an automatic feeder for edge tape rolls with a pneumatic trimming system.

OPPOLD Polska Sp. z o.o. Pavilion 3, stand 32

QuickWood Sanding System

QuickWood sanding system uses patented

oscillating discs as well as a combination of

abrasive material and replaceable brushes. The

system can be used for preliminary, intermedi-

ate and finish sanding tasks. We offer portable

sanders and fully automatic solutions designed

for sanding wood, MDF and other wood-based

materials.

PAUL OTT GmbH Pavilion 5, stand 42

Shark QuattrolineThe new edgebander. Shark Quattroline is fast and highly efficient. The machine is equipped with: Premilling, Magazine for 4 coils + one exchange edge, CombiMelt-Glueing System, 4 trimming stations (rough, fine, fine+corner rounding), profile scraper with 4 tools (selec-tion via control panel), flat scraper. Shark Quat-troline offers a very high grade of automatisa-tion for professional use.

PBR Pavilion 5, stand 2

SR-Xpress CNC Drilling MachineSR-Xpress is a high quality CNC drilling cen-tre designed specifically to ensure flexibility and speed for manufacturers representing the woodworking sector, as well as plastics industry and similar companies. It has been developed in such a way so as to make it easy to use for operators without high professional qualifica-tions – SR-Xpress is simple to program and con-figure, and extremely user-friendly. The machine is also characterised by effortless maintenance and high durability, remaining fully function-al throughout its operating life. It is equipped with robust electronic positioning system – easy to use and program, with electronic con-trol in three axes (X-Y-Z).

The device is programmed directly via a colour touch-screen panel mounted on the machine, offering enough internal memory to store dif-ferent user programmes and settings.

PDS GmbH Pavilion 5, stand 37

CNC spindlesXLERATOR series spindles with manual and automatic tool change and S1 efficiency. The spindles of rigid and compact structure are cooled with a fan, compressed air or liquid. They are also equipped with a bearing temperature thermocouple, a single control connector, a sin-gle compressed air inlet, Rebo type tool holder. Power range: 5 to 16 kW.

NOVELTIES



PENNY-DOBROSZYCE Sp. z o.o.Pavilion, stand 37

SMPA 500.1-E Automated Pallet Nail-ing Machine – STÖRI MANTEL CZSMPA 500.1-E is the world’s first machine to feature a system of maintenance-free round-ed screws of the pressure bar. The screws are powered by two servo-electric motors, which helped reduce undesired dynamic jerks, and in effect decreased overall noise level. By applying servo-electric motors in the drive system of the nail driving bar and the template, more accu-rate positioning and higher operating speed have been obtained. The nailing process is car-ried out by simultaneous driving of an entire row of nails in a single cycle.

HEDGEHOG Moulder for Finger Joints – Benmet CZA revolutionary solution – moulder for finger joints with individual replaceable blades. Fast assembly and disassembly of individual knives; single screw; no additional equipment required for setup. Lower resistance thanks to the spiral alignment of knives, and increased durability of machine components. Versatility – possibility of installing different knife sizes (10/11, 15/16.5) and thicknesses, depending on the connection type (concurrent or linear, type A and B). Head life up to 5 years; knives can be sharpened up to 90 times. Sharpening can be carried out directly on the head, or on a special device.

AOP Automatic Edging System – Dřevostroj Čkynĕ CZTimber sorting before edging. Upward direction of timber wane. Cutting off any faults on timber ends. Measuring timber width, data process-ing, optimisation. Edge saw control – optimi-sation of cutting width to ensure maximum efficiency. Timber edging on the OP 850/65 edger. Removal of edgings. Maximum capacity: 20 planks per minute.

PENNY GONDEK Sp. z o.o.Pavilion 5, stand 18

ZM-18 Line LaserNew models of ZM-18 laser modules emitting red and green laser wavelengths, now also with a blue output. The new products are IP67 rated, ensuring unparalleled precision and accurate laser projection. All models offer manual focus-ing and a choice of optics to fine-tune laser projection. Line, dot, circle, multiple lines and a cross are some of the basic optics available. Similarly to other laser modules in our portfolio, the new models are resistant to water, dust and machine-induced vibration. In the case of the red wavelength, diode power range has been increased from 1-80 mW to 1-200 mW, which translates into more than 40 m projection. Sup-ply voltage range: 5-30 VDC.

EVO Wood Moisture MeterMoisture meter designed for wood products.

Application: floors, fur-niture, sawn timber.Wood groups: 1-21. Material density: 175-1075 kg/m³. As the device is pressed against the material to

be measured, its display immediately shows current moisture content.

IQ Compressed Air Humidification System – possibility of adjusting the direction of fogging nozzlesThe system comprises adjustable nozzles con-

nected to the supply of water and compressed air (ca. 5 bar). Under the influence of pressure, required amount of water is car-ried to the nozzle, and atomised into a fine aerosol mist. It is an optimum solution for small

production plants and warehouses. Relative humidity control from 30% up to 100% (thanks to a hygrostat integrated with the system). No water pre-treatment required. Easy to install and expand. Favourable price-to-performance ratio. Capacity: 4-16 l/h. Relative humidity con-trol in the range of 30% to 100%.

PH Kontra Technologie Pavilion 3, stand 55

CAPE nailing machine model CP-110

Machine with continues cycle with chains.Automatic boards and blocs squaring system.Touch colour screen to programmation machine, visualizing the pallet and move all the mechanical parts manually.Program with visual view in real time of the inputs/outputs of the PLC and analyze work and working diagnostic of the machine with explanations and solutions in case the machine stops.

POLPACK Sp. z o.o. Pavilion 3, stand 107

Wrapper SEMachine designed for pre-stretch wrapping of doors, windows, panels, parquets, skirting boards, furniture, and windowsills.

Wrapper VOMachine designed for securing doors and win-dows with stretch film.

PRINZ Polska Sp. z o.o. Pavilion 3, stand 76

Saw Chains: LOGMAX, MULTICUT and DURACUTOne of the latest results of our continuous research is the new, chromium plated LOG-MAX 15/3 chipper saw chain with improved tooth geometry for optimum removal of wood chips. Two other new solutions are scraper chains offering world-class durability and cut-ting quality: MULTICUT with high quality pro-tective coating (guaranteeing up to 50% long-er life) and DURACUT with long carbide-tipped teeth (offering up to 1000 cutting cycles with-out sharpening).

REMA S.A. Pavilion 5, stand 69

DMMS-40/340 Special Digital Dimen-sion Circular SawDMMS-40 Special Digital is a modern dimension saw designed for longitudinal and cross cutting of laminated boards and wood-based materials. As a new addition to the well-known SPECIAL line of sawing machines, it offers digital control of the longitudinal fence, as well as height and tilt adjustment of the main saw blade. All fea-tured solutions ensure high cutting accuracy and quality.

RO-MA Zakłady Narzędzi Skrawających Sp. z o.o.Pavilion 3, stand 3

Gold Wide Band-Saw Blade

Gold wide band-saw blade is manufactured from alloy steel with a characteristic gold-en colour. Ro-Ma has expanded its portfo-lio of wide saw blades with yet another (fifth) grade of steel, thus offering our Customers an even greater chance of optimal tool selec-tion. This offer is addressed to Customers seek-ing high quality solutions. The saw blade is sold ready for use. What the Customer purchases is a finished product submitted to a professional service package.



SCHUKO Polska Sp. z o.o. Pavilion 5, stand 28

Cascade ventilation system - savings of energy

Energy savings, system reliability, easy main-tenance and operation. A few smaller-individ-ual fans have been used that can be switched on and off, if necessary. Optimum energy uti-lization: exhaust fans always reach optimum efficiency and maximum compression. The amount of supplied air is adjusted to the actual demand. There is no need for an inverter.

SCM Group Polska Sp. z o.o. Pavilion 5, stand 26

Olimpic K 130 Edgebanding Machine Manufactured by the SCM Group, Italy, the standard version of this machine offers a feed speed of 9 m/min, and features: glue tank, cross-cut mitre saw, and a lengthwise mould-ing unit.Optionally: second motor for the cross-cut mitre saw, radial scraping unit, buffing unit.Working height: 8-50 mm. Minimum workpiece width: 60 mm. ORION ONE electronic control system.

EUROSAND L 1350 RK Wide-Belt Sanding MachineManufactured by DMC, this machine with a working width of 1350 mm has been fitted with units enabling calibrating and sanding of solid-material workpieces. First working unit: steel roller with a diameter of 200 mm. Second combi unit: rubber coated roller (65˚ Sh) with a diameter of 175 mm, and a rigid sanding pad. Each of the working units is powered by an independent 11 kW motor. The device also features a brush cleaning unit, and an electron-ic worktable height adjustment system.

GS LA 30-13 PA BO Hydraulic Edge Gluing PressManufactured by SERGIANI, this through-feed hydraulic press for edge glued panels (10-80 mm thick) offers a 3000 x 1300 mm worktable and optimised travel of the upper plate. Drilled steel plates are plated with INOX stainless steel. The back fence of the machine enables contin-uous gluing operation. The press is equipped

with a semi-automatic feed table, and a vacu-um unloading table. The heating medium is oil, electrically heated in an independent system.

SEMPRE Maszyny i Urządzenia Pavilion 5, stand 12

BUSELLATO JET OPTIMA CNC machin-ing centreThe CNC machine for the production of doors and windows. The centre, equipped with a ver-tical electro-spindle that can rotate around the fourth C-axis for comprehensive machining, combined with up-to-date real-time software provides an unlimited machining potential. The machine of very stable structure is suitable for industrial applications.

SOPUR Innowacyjno – Wdrożeniowa Sp. z o.o. Pavilion 4, stand 37

New Line of Water and Solvent Based PatinasNew line of water and solvent based ageing stains for adding an antique look to wooden surfaces. Our product portfolio also includes patinas helping achieve a „decape” effect, as well as gold and silver metallic patinas.

TANEL Elektronika i Informatyka Sp. Jawna Pavilion 5, stand 70

HGR-9 Wood Moisture MeterHGR-9 is an inexpensive, versatile, cutting-edge electronic device designed for measuring mois-ture content in wood and concrete. It is espe-cially useful during parquet and wooden floor laying. Despite compact dimensions, it guaran-tees excellent accuracy thanks to a specialised microprocessor. The device is extremely user-friendly. Wood species and temperature are taken into account during the measurement.

HIT-4 Wood Moisture MeterHIT-4 is a cutting-edge electronic wood mois-ture meter. The design of this device enables using long measuring needles, and taking mois-ture measurements from large wood pieces. The electrodes are inserted into (and taken out of ) wood by sliding the handle along the vertical guide bar. As a result, the needles always travel perpendicularly to the wood surface, being pro-tected against bending or breaking. The mois-ture meter features a temperature compensa-tion circuit. HIT-4 has been designed for use in the woodworking sector, forestry, and produc-tion of wood-based items.

TEKNIKA Sp. z o.o. Pavilion 9

Innovative Timber Sawing LineThe line has been designed for efficient and innovative sawing of up to 4.5 m long round

logs of deciduous wood. It is fully automatic, i.e. all major processing and material handling operations are mechanised, and automatically controlled. The log sawing process is control-led by a computer system, which suggests the most effective sawing method, depending on log dimensions.

Towarzystwo Gospodarcze MEBLOPOL Sp. z o.o. Pavilion 4, stand 15

EVA-Based Hot Melt AdhesiveThe Germany-based Follman company has launched a line of hot melt edgebanding adhe-sives (with and without fillers), as well as soft-forming and profile sheathing adhesives (also in two versions – with and without fillers).

FOLCO-LIT D4W91 – D4 rated POW AdhesiveD4 rated, single-component dispersion adhesive without fillers. WATT’91 certified – 7.6 N/mm2. It is suitable for gluing: laminated wood for window production (joints exposed to atmos-pheric conditions must be properly protected); interior elements exposed to frequent contact with condensing water; window frames; hard and soft wood species; structural wood; HPL/CPL laminated products. It also complies with requirements for II cycles of conditioning, e.g. PN EN 205.

TUBES INTERNATIONAL Sp. z o.o. Pavilion 3, stand 38

Ducting hoses connectors and reducers

Quick and effective assembly of ducting hos-es with the help of connectors and worm drive type hose clamps.Available: straight connectors – for connecting, extending and fastening of hoses, hose reduc-ers - for connecting, extending and fastening of hoses with different ID, angle joints, tees. Material: zinc plated galvanized steel (different materials available on request). Wide range of sizes: from 100 mm up to 800 mm (different sizes available on request). Custom made con-nectors (according to customers requirements) available on request.Practical application: ventilation system, duct-ing of fumes and dust, ventilators, granulate transfer, etc.

NOVELTIES



WEISS Sp. z o.o. Pavilion 3, stand 110

Biomass GasifiersBiomass is converted into gas (gasification), which is used in gas engines to produce elec-tricity and heat. In the two-stage gasification process, there is gas production and oxidation of tar. The tar in the gas is around 3%, which is necessary for correct operation of the gas engine. 38% electrical efficiency. Tar free gas.

WINTERSTEIGER AG Pavilion 5, stand 11

DSB SINGLEHEAD Band SawThis thin-cutting band saw makes a perfectly effective solution for countless applications in high-quality thin-cutting. DSB Singlehead com-bines absolute precision with extraordinary effi-ciency in the production of high-quality lamel-las for: parquets, multi-layer boards, doors, glued laminates, doors, furniture, windows, ski/snowboard components, musical instruments, as well as non-timber products such as: com-posite materials, polystyrene, cardboard, cork, foamed materials, polycarbonate materials, graphite, plastics, light metals, and many more.

ZEMAT Technology Group Sp. z o.o. Pavilion 5, stand 67

Maszyna do produkcji pudeł klapowych z tektury falistej BOXMAT 2400Machine for manufacturing flap boxes from corrugated cardboard, designed for produc-ing short batches as well as for mass produc-tion. Notching, folding (lengthwise and cross-wise), and trimming excess material – all in a single production cycle. Fast and simple oper-ation. Swift adjustment of parameters thanks to servo drives. Automatic cardboard feeder with a reliable loading system. All functions operated via a touch-screen panel. Pressure and folding parameters adjusted from a control desk. Anti-slip guide rolls preventing cardboard „floating”.

FIXMAT 2600 Gluing Machine for Flap BoxesDesigned for gluing corrugated cardboard box-es with a maximum format exceeding 2.6 m, Fixmat 2600 is an excellent complement to eve-ry production line. Simple operation, applica-tion of easily available water-based adhesives, adjustable unloading table, as well as fast setup of other parameters are undeniable advantages of this machine.

AMI Polska Sp. z o.o. Pavilion 7A, stand 12

New bracket for low-hanging cabi-nets from CamarA revolutionary solution for mounting low-hanging cabinets. This state-of-the-art prod-uct is characterised by a certified load capaci-ty of up to 600 kg, while remaining adjustable in both vertical and horizontal planes. No addi-tional supports or angle brackets are required.

New bracket for hanging panels from CamarThe only solution of this type in the market, allowing to use not just the front but also the top of the panel, ensuring its versatile instal-lation and easy removal. In effect, the panel remains adjustable at any time.

Gas springs for furniture fronts, cabi-nets and chests from VapsintThe Italian manufacturer of top quality gas springs presents a broad selection of solutions for opening furniture fronts, as well as soft-close systems for cabinet doors and chest lids, the lat-ter being the only products of this type in the market. Our gas springs are available in all col-ours.

Smove Silentia – New universal door damper system from Arturo SaliceThe new universal soft-close damper is availa-ble in two versions: damper mounted under the mounting plate’s screw, and a cross-type damp-er. Compatible with: regular and clip-on hing-es; 26, 35 and 40 hinge cup diameters; regular and clip mounting plates. Various and adjusta-ble damping rates. One damper is enough for one door.

ARTE METAL STYLE Polska Sp. z o.o. Pavilion 7A, stand 29

AUREA Line of Furniture Handles

The Aurea line of handles from the Italian mar-ket leader – Bosetti Marella – draws on the best traditions of Italian design. The new handles are individually hand-finished using jewellery tech-nique, and plated with 24-carat gold. In effect, each product is unique, giving furniture exclu-sive charm and elegance. The entire production process – from design to finishing – is carried out in Italy.

BLUM Polska Sp. z o.o. Pavilion 7A, stand 4

SERVO-DRIVE System for AVENTOS

SERVO-DRIVE for AVENTOS is an electric open-ing support system for upper cabinet fronts. A light touch of a hand is enough to make the system lift the front automatically. Closing action is enabled by a switch placed on the side of the cabinet, which helps lower the front gen-tly and silently thanks to the BLUMOTION fea-ture. SERVO-DRIVE System is available for AVEN-TOS HF, HL and HS lift systems.

CLIP top BLUMOTION Hinge

CLIP top BLUMOTION is a hinge type with the BLUMOTION feature integrated in the hinge cup, thus offering an additional functionality – silent and gentle closing action. It also works with small doors, in which BLUMOTION can be easily disabled in one hinge by sliding a switch in the hinge cup. The hinge is available for doors with a wooden frame, wide and narrow alumin-ium frames, as well as angular solutions.



CALIFORNIA TRADING Sp. z o.o. Pavilion 8A, stand 31

Modified Veneer – Lux LineA long period of research and experimentation allowed our company to achieve fantastic re-sults in the field of modified veneer production. Having minimised the colour fading effect caused by UV exposure, we have developed the Lux line.

DREW-ZET Sp. z o.o. Pavilion 7, stand 14

Shaped PlywoodNew pattern of shaped plywood – chair legs and armrests are obtained after cutting.

FORNER Sp. z o.oPavilion 8, stand 13

TSS CLEAF Furniture Panels

SMART, SURF and PENELOPE are cutting-edge products developed by Italian design masters. They are characterised by deep and distinct surface structures. FORNER is the only company to offer this innovative solution in Poland and neighbouring countries. Ideal fields of applica-tion of TSS CLEAF panels include sliding door in-fills, kitchen furniture fronts, as well as office furniture fronts and main bodies.

HPL Decorative Laminates

Botanic is a collection of HPL decorative lami-nates combining design refinement with the beauty of nature. The amazing visual and opti-

cal effect has been achieved by pressing natu-ral elements – natural fibres of leaves, flowers, grass or rice paper – in between paper layers. Thanks to this state-of-the-art technology, the plants can actually be touched and sensed. No two laminate sheets have identical patterns.

Fire-resistant boards

Fire-resistant chipboards make an excellent solution wherever construction or furniture materials must satisfy extremely high require-ments. Characterised by high density and pol-ished surface, our fire-resistant boards comply with the strictest EU standards – Euroclass B – which is confirmed by a relevant certificate. Being s1/d0 rated, this product also prides itself on class-leading performance in additional safety standards (no emission of smoke or flam-ing droplets/particles).

FRIULEVIGATURA SNC di Moras Antonio & Nardin Giorgio Pavilion 7, stand 20

Extraflex venner edges

Special veneer edges top lacquered which per-mit to curve very narrow radius from 1mm. The use of this material gives the possibility to real-ize finished product with no further lacquering passages. Advantages for customers: no expen-sive and bulky lacquering machineries and pos-sibility to realize Just In Time sales with no dis-comforts.

GRASS GmbH Pavilion 7A, stand 18

DYNAPRO Drawer RunnerThe first runner for wooden drawers with a 3D adjustment option. This solution ensures com-prehensible tool-free adjustment of drawers in three dimensions. The system enables material-efficient production of drawers, and a comfort-

able alignment of gaps between front panels.

The Soft Close damping system guarantees silent and effortless closing action.

Moreover, full slide synchronisation mechanism offers unparalleled operating comfort, with-out unnecessary noise or resistance. Manufac-tured in two versions – for loads up to 40 kg and 60 kg respectively, in lengths from 250 mm to 550 mm.

Compatible with Grass’ handle-free drawer opening systems, such as the mechanical Tip-matic Plus, and the electro-mechanical Senso-matic.

HETTICH Polska Sp. z o.o. Pavilion 7A, stand 19

Design Side

The new DesignSide extension adapter for InnoTech drawers creates unlimited possibili-ties for applying customised designs behind the drawer front. DesignSide allows to use such materials as glass, wood or stone, without the need for providing side railings. DesignSide for InnoTech drawers redefines kitchen aesthetics at a new, high level.

P.P.U.H. ANIMAR Marian Szczęsny Pavilion 7, stand 23

Zoned Pocket SpringsTraditionally, at least two different wire thick-nesses are applied to achieve the zone effect, whereas our production process involves only one spring thickness. Each spring is manufac-tured to comply with a predefined elastici-ty parameter, thus guaranteeing better adjust-ment of individual firmness zones.

PROFORM Sp. z o.o. Pavilion 8, stand 15

Moduloform - New Openwork Pat-ternsModuloform is a standard product from Proform – the manufacturer of furniture components. The MDF-based decorative panel is a part of a concept involving the continuity of patterns on furniture fronts, wardrobes, built-ins with sliding doors, wall panels or other interior finish-



ing elements. The new patterns can be applied as radiator covers, folding screens, bedroom furniture components, etc.

Przedsiębiorstwo Zaopatrzenia Budownictwa PZ-BUD Sp. z o.o.Pavilion 7, stand 46

Kerrock LUMINOKerrock LUMINO offers five semi-transparent colours: white, pastel blue, yellow, pink and green. The improved formula and modified technology allow to produce acrylic compos-ite material characterised by high light trans-mittance, which makes Kerrock applicable for designing illuminated furniture and other dec-orative elements. LUMINO panels are manufac-tured in 3600x760 mm sheets, with thicknesses of 6, 8 and 12 mm.

REJS Sp. z o.o. Pavilion 7A, stand 1

CARGO MAXI / MIDI with FULTERER Drawer Runners – MAXIMA Line

The basic fea-tures of this solu-tion include: com-fortable access to stored items due to the full-extension system; drawer runner structure guaran-teeing front open-ing with minimum effort; 200 kg

dynamic load capacity, with full stability main-tained even under maximum load; soft-close system with dampers to ensure silent and safe

operation; high finishing quality and outstand-ing aesthetics reflected in the finest details of the product.

Swivel CARGO MAXI / MIDI – MAXIMA

lThe basic features of this solution include: com-fortable access to stored items due to the 180-degree swivel system – the rack can swivel left or right; drawer runner structure guaran-teeing front open-ing with mini-mum effort; special insert set-

ting the rack in a safe position as the cabinet is closed; 100 kg dynamic load capacity, with full stability maintained even under maximum load; soft-close system with dampers to ensure silent and safe operation; high finishing quality and outstanding aesthetics reflected in the finest details of the product.

SÜNKEL ŚRUBY Sp. z o.o. Pavilion 7A, stand 23

BC 14–00

Sofa functional fittings from Lusch GmbH are

used in multiseaters with fixed seat and back.

The frame depth (76 cm) makes it possible to

obtain the 200 cm long sleeping position. The

structure is stable and durable. The assembly

method allows using foams thick enough to

ensure high seating and sleeping comfort. The

BC 14-00 sofa bed is very simple and easy to

operate.

CA 27–03Headrest fittings from Lusch GmbH are used in upholstered furniture. They can be unfolded up

vertically to change the low back-rest into high back-rest. The multi-step structure makes it possible to hide excessive material which is a problem fre-quently occurring in this type of systems. After unfolding the headrest we obtain a visually attractive and stable support for the head and the back.

Z.H.P. KOBAX Krzysztof Pająk Pavilion 8A, stand 3

Furniture Doors – Moulding Tech-nique

Cutting-edge innovative moulding solu-tion for furniture fronts. Our special tool can carry out extremely complex moulding designs – it needs just 1 pass to complete what a stand-ard CNC would in 20 passes or more. As a result, we can obtain patterns which are beyond the reach of vertical moulding machines.

NOVELTIES

REGISTER FOR THE TRADE FAIR AND RECEIVE FREEBIES!

www.mtp24.pl



We invite to the next edition!www.drema.pl/en www.furnica.pl/en




EXHIBITION AREA

Drema Furnica News - EN

Documents

Transcript of Drema Furnica News - EN