Document No. : CL-F-SKF Version: vG1...specific project in question. Revision Date Version No....
Transcript of Document No. : CL-F-SKF Version: vG1...specific project in question. Revision Date Version No....
Program book/Guidelines for SKF Lubrication Systems – SKF Products
Document No. : CL-F-SKF
Version: vG1.1
Original Date: 9-15-2009 Revision Date: 11-01-2010
Central Manufacturing Engineering SKF Lubrication Solutions
Page No.: 2 of 49 Document No.: CL-F-SKF Version G1.1 Original Date: 09-15-2009 Revised Date: 11-01-2010
Document Management Information
The controlled version of this document is the one stored on the GMPT Machinery and Equipment Specifications website. Any printed copy is an uncontrolled copy. The user shall verify with the website that he/she is using the appropriate version of the specification for the specific project he/she is working on. Any questions or comments with respect to this specification should be directed to the project engineer for the specific project in question.
Revision Date
Version No.
Document Name
Revision
Paragraph Affected
Revised By
09-15-2009 G1.0 CL-F-SKF First Version Released All SKF
11-01-2010 G1.1 CL-F-SKF Filtration level changed to 10 micron from 25 micron on several units. Updated several part numbers. Added float switch
3.4.1, 3.4.2, 3.5.3, 3.5.5,3.6.3 5.21, 5.22, 5.23, 5.24, 5.29, 5.32, 5.33, 5.34
Dan Schultz
Central Manufacturing Engineering SKF Lubrication Solutions
Page No.: 3 of 49 Document No.: CL-F-SKF Version G1.1 Original Date: 09-15-2009 Revised Date: 11-01-2010
Contents
1. GENERAL INFORMATION....................................................................................................................................5
1.1. Scope of Document................................................................................................................................................5
1.2. Voltage specifications for AC motors..................................................................................................................5
2. TECHNICAL, PROJECT AND SALES SUPPORT CONTACTS...........................................................................6
2.1. Technical Support.................................................................................................................................................6
2.2. Project and Sales Contacts……………………………………………………...............................…........................7
3. PRODUCT OVERVIEW…………………………………………………………………....………….............................8
3.1. Piston distributor system…………………………………………………...........………...........................................8
3.2. Progressive feeder system…………………………………………………………....................................................9
3.3. Oil Air Lubrication…………………………………………………………........……….............................................10
3.4. Pumps………………………………………………………………………............………...........................................10
3.5. Gear and piston pump units with reservoir for oil………………………….........…….......................................11
3.6. Pump units for fluid grease…………….…………………………………..........…….............................................11
3.7. Piston pumps electrically powered for fluid grease and grease……..........………........................................12
3.8. Control and monitoring units………………………………………..............………..............................................12
3.9. Filters……………………………………………………………………….............……..............................................12
4. SAMPLE LUBRICATION CHARTS………………………………………………………...…...................................13
4.1. Single line parallel piston distributors……………………………………...........….............................................13
4.2. Single line series progressive system……………………………………..........……….......................................14
4.3. Grease nipple lubrication……………………………………………………..........…..............................................15
5. TECHNICAL DATA / FORMATION……………………………………………………….....…….............................16
5.1. 320 Metering units for oil and fluid grease with solderless tube connection................................................16
5.2. 320 Metering units for oil and fluid grease with quick connectors…...........……...........................................17
5.3. 340 Piston distributors for oil with solderless tube connection………...........……........................................18
5.4. 340 Piston distributors for oil with quick connectors…………………...…......................................................19
5.5. 340 Piston distributors for fluid grease with solderless tube connection.........…........................................20
5.6. 340 Piston distributors for fluid grease with quick connectors…..............…................................................21
5.7. 350 Piston distributors for oil with solderless tube connection……....………...............................................22
5.8. 350 Piston distributors for oil with quick connectors………….......................................................................23
5.9. 350 Piston distributors for fluid grease with solderless tube connection.....................................................24
Central Manufacturing Engineering SKF Lubrication Solutions
Page No.: 4 of 49 Document No.: CL-F-SKF Version G1.1 Original Date: 09-15-2009 Revised Date: 11-01-2010
5.10. 350 Piston distributors for fluid grease with quick connectors…………...……….....................................25
5.11. 390 Piston distributors for oil with solderless tube connection………………..……..................................26
5.12. 390 Piston distributors for fluid grease with solderless tube connection…..……....................................27
5.13. VPG progressive feeder…………………..……………………………………......………...................................28
5.14. VPBG progressive feeder………………………………………………………......………..................................29
5.15. VPKG progressive feeder……………………………………………………………..……...................................30
5.16. VPG-VEN Zone control valve……………………………………………………………….……………………….31
5.17. Oil + Air unit………………………………………………………………………………….…................................32
5.18. MV Mixing valves for oil+air lubrication MV20x-20-V58-VS…………………………....................................33
5.19. KFG1-5W1-V57+924 Piston pump electrically operated for grease NLGI 1/2……....................................34
5.20. KFG1-5W2-V57+924 Piston pump electrically operated for fluid grease NLGI 0/00/000..........................35
5.21. MFE5 – Units for oil…………………………………………………...………………......…..................................36
5.22. MFE5 – units with reservoir for oil……………………………………………………...…..................................37
5.23. MFE5-BW7-V59-*………………………...……………………………………………….........................................38
5.24. MFE2 – units for fluid grease…………………………………………………………..…....................................39
5.25. MFE2-KW6F-V58E* for fluid grease…………………………………………………….….................................40
5.26. KFB1 lube unit for fluid grease with 1 liter reservoir…………………………………....................................41
5.27. P-886-BW* units for oil…………………………………………………………………..……................................42
5.28. Float switch for minimum level with pre-warning WS35-S30+XXX…………………...................................43
5.29. Float switch for minimum level with pre-warning WS35-2-XXX-V71………………………………………....44
5.30. Float switch for fluid grease BK6.U117-V57………………………………………….......................................45
5.31. 176-190-000 digital pressure switch………………………………………………………..................................46
5.32. Flow monitor, micro flow, electronic GS30* - GS40* - 171-*00-***……………....................................…….47
5.33. 169-460-185 Filter 25μm…………………………………………………………………………………………47
5.34. 169-460-185-V57 Filter; 10μm……………………………….................................…………...……….………….48
5.35. 169-460-260-V57 Filter; 3μm………...................................………………………………………………............49
Central Manufacturing Engineering SKF Lubrication Solutions
Page No.: 5 of 49 Document No.: CL-F-SKF Version G1.1 Original Date: 09-15-2009 Revised Date: 11-01-2010
1. General Information
1.1. Scope of Document
This delivery specification covers basic conditions for the design of lubrication systems for manufacturing equipment and production facilities. This standard promotes machine uptime, system commonality, operating functionality and reduced central lubrication equipment lifecycle costs.
1.2. Voltage specifications for AC motors
Voltage specifications may vary from plant to plant. Consult the responsible GMPT Controls Engineer for the correct voltage in compliance with the project requirements.
Central Manufacturing Engineering SKF Lubrication Solutions
Page No.: 6 of 49 Document No.: CL-F-SKF Version G1.1 Original Date: 09-15-2009 Revised Date: 11-01-2010
2. Technical, Project and Sales Support Contacts
2.1. Technical Support
North America Europe East Asia
Company SKF Lubrication Systems USA, Inc.
SKF Lubrication Systems Germany
SKF Lubrication Systems Japan Ltd.
Hishie 2-chome 16-20
Address 2115 Aluminum Ave Motzener Str.35/37 Higashi-Osaka-City
Hampton, VA. 23661 D-12277 Berlin 578-0984 Osaka Phone 757-951-0370 011-49-30-72002-152 011-81-729-645055 Website www.skf.com/lubrication www.skf.com/lubrication www.skf.jp/lubrication
Local Support Frank Casinelli Eva M. Tausend Frank Allgeier
Office 757-951-0370 011-49-30-72002-323 011-81-729-645055 Mobile 248-982-7411 n/a n/a
Fax 757-951-0369 011-49-30-72002-481 011-81-729-651258
E-mail [email protected] [email protected] [email protected]
Brazil P.R. China
Company SKF Lubrication Systems Brazil SKF Lubrication Systems China
Address Estrada do Ingai, 11370 4th Floor, Shi Yan Building, No. 501 Jin Wan Road
Lote Area B1, Setor A - Bairro Ingai
Jinquiao Export Processing Zone Pudong, 201206 Shanghai P.R. China
Phone + 55 11 4619 93 40 +86 21 58 34 53 55
Website www.skf.com/lubrication www.skf.com/lubrication
Local Support Mario Ramacciotti n/a
Office +55 11 4619 91 11 +86 21 58 34 53 55
Mobile n/a n/a
Fax +55 11 4619 91 99 +86 21 58 99 24 92
E-mail [email protected] n/a
Central Manufacturing Engineering SKF Lubrication Solutions
Page No.: 7 of 49 Document No.: CL-F-SKF Version G1.1 Original Date: 09-15-2009 Revised Date: 11-01-2010
2.2. Project and Sales Contacts
North America Europe East Asia
Company Morrell Inc.
SKF Lubrication Systems USA, Inc.
SKF Lubrication Systems Germany
SKF Lubrication Systems Japan Ltd.
Address 3333 Bald Mountain Rd. 2115 Aluminum Ave. Motzener Str. 35/37 Hishie 2-chome 16-20 Auburn Hills, MI. 48326 Hampton, VA. 23661 D-12277 Berlin Higashi-Osaka
578-0984 Osaka Phone (248) 373-1600 (757) 951-0370 011-49-30-72002-152 011-81-729-645055 Website www.morrellinc.com www.skf.com/lubrication www.skf.com/lubrication www.skf.jp/lubrication Project Contact
Dale Pioch Frank Casinelli Andreas Garlipp Frank Allgeier
Office (248) 377-3580 (757) 951-0370 011-49-30-72002-413 011-81-729-645055 Mobile (248) 373-0612 (248) 982-7411 NA NA FAX (248) 373-0612 (757) 951-0369 011-49-30-72002-261 011-81-729-651258 E-Mail [email protected] [email protected] [email protected] [email protected]
Project Contact
Dennis Gibbons
Office (989) 792-3311 Mobile (586)242-6422 FAX (959)792-5393 E-Mail [email protected]
Brazil Company SKF Lubrication Systems
Brazil Address Estrada do Ingai, 11370
Lote Area B1, Setor A- Bairro Ingai
Phone +55 11 4619 93 40
Website www.skf.com/lubrication
Project Contact
Franklin Dias
Office +55 11 4619 93 40 Mobile +55 11 9480 55 37 Fax +55 11 4619 91 99 Email [email protected]
Central Manufacturing EngineeringSKF Lubrication Solutions
Page No.: 8 of 49 Document No.: CL-F-SKF Version G1.1 Original Date: 09-15-2009 Revised Date: 11-01-2010
3. Product Overview
3.1. Piston distributor system Section
No. Section Title Symbol SKF – No. Remark GM – No.
3.1.1.
Single line parallel systems piston distributors for oil with quick connector
320-401-3-VS 320-402-3-VS 320-403-3-VS 320-406-3-VS 320-410-3-VS 320-416-3-VS 342-1XX-000-V57* 343-1XX-X00-V57* 345-1XX-XXX* 352-0XX-000-VS-V57* 353-0XX-X00-VS-V57* 355-0XX-XXX-VS-V57*
0,01 cm³ 0,02 cm³ 0,03 cm³ 0,06 cm³ 0,10 cm³ 0,16 cm³ see drawing
3.1.2. Single line parallel systems piston distributors for oil with solderless tube connection
320-401-3 320-402-3 320-403-3 320-406-3 320-410-3 320-416-3 342-4xx-000-V57* 343-4xx-x00-V57* 345-4xx-xxx-V57* 352-0xx-000-V57* 353-0xx-x00-V57* 355-0xx-xxx-V57* 392-00x-000-V57* 393-0xx-x00-V57*
0,01 cm³ 0,02 cm³ 0,03 cm³ 0,06 cm³ 0,10 cm³ 0,16 cm³ see drawing
3.1.3. Single line parallel systems piston distributors for fluid grease with quick connectors
321-403-2-VS 321-406-2-VS 321-410-2-VS 342-9xx-000-V57* 343-9xx-x00-V57* 345-9xx-xxx-V57* 352-1xx-000-VS-V57* 353-1xx-x00-VS-V57* 355-1xx-xxx-VS-V57*
0,03 cm³ 0,06 cm³ 0,10 cm³ see drawing
Central Manufacturing Engineering SKF Lubrication Solutions
Page No.: 9 of 49 Document No.: CL-F-SKF Version G1.1 Original Date: 09-15-2009 Revised Date: 11-01-2010
Section No.
Section Title Symbol SKF – No. Remark GM – No.
3.1.4.
Single line parallel system piston distributors for fluid grease with solderless tube connection
321-403-2 321-406-2 321-410-2 342-5xx-000-V57* 343-5xx-x00-V57* 345-5xx-xxx-V57* 352-1x0-000-V57* 353-1xx-x00-V57* 355-1xx-xxx-V57* 392-1xx-000-V57* 393-1xx-x00-V57*
0,03 cm³ 0,06 cm³ 0,10 cm³ see drawing
3.2. Progressive feeder system
Section No.
Section Title Symbol SKF-No. Remark GM – No.
3.2.1 Progressive feeder section feeder
VPG-3-xxx VPG-4-xxx VPG-5-xxx VPG-6-xxx VPG-7-xxx VPG-8-xxx VPG-9-xxx VPG-10-xxx
3.2.2 Progressive feeder Section feeder (for gantries only)
VPKG-3-xxx VPKG-4-xxx VPKG-5-xxx VPKG-6-xxx VPKG-7-xxx VPKG-8-xxx VPKG-9-xxx VPKG-10-xxx
3.2.3 Progressive feeder Block feeder (for manual grease-nipple systems only)
VPBG-3-xxx VPBG-4-xxx VPBG-5-xxx VPBG-6-xxx VPBG-7-xxx VPBG-8-xxx VPBG-9-xxx VPBG-10-xxx
3.2.4 Zone control valve
VPG-VEN-S1-V57+924
Central Manufacturing Engineering SKF Lubrication Solutions
Page No.: 10 of 49 Document No.: CL-F-SKF Version G1.1 Original Date: 09-15-2009 Revised Date: 11-01-2010
G
Section No.
Section Title Symbol Remark GM – No.
3.2.4 Blockage indicator for VPG
VPG-UE16-2 VPG-UE32-2 VPG-UE50-3 VPG-UE63-2 VPG-UE80-2 VPG-UE100-2
16 bar 32 bar 50 bar 63 bar 80 bar 100 bar
3.2.5 Cycle indicator Auxiliary equipment Pin 1: :+24V Pin 3: 0V Pin4: output
177-300-094 177-300-095 177-300-097
VPG VPKG VPBG
3.3. Oil Air Lubrication
3.4. Pumps
rk GM – No. SectionNo.
Section Title Symbol SKF – No. Rema
3.4.1 Oil gear, gerotor and vane pumps ing ***See draw MFE*-V58-+ MF2-V58+***
*FLMF*-V58+*** 143-012-***+**
3.4.2 Fluid grease gear pumps *** MFE2-F-***-V58+
3.4.3 Piston pump for piston distributor pneumatically operated for oil
0 cm³/stroke
P-886 3
Symbol SKF – No. Remark GM – No. Section No.
Section Title
3.3.1 Oil+air mixing valves 58-VS MV202-20-V MV203-20-V58-VS MV204-20-V58-VS MV205-20-V58-VS MV206-20-V58-VS MV207-20-V58-VS MV208-20-V58-VS
3.3.2 Oil+air unit See drawings OLA**..V58+***
Central Manufacturing Engineering SKF Lubrication Solutions
Page No.: 11 of 49 Document No.: CL-F-SKF Version G1.1 Original Date: 09-15-2009 Revised Date: 11-01-2010
3.5. Gear and piston pump units with reservoir for oil
3.6. Pump units for fluid grease
e t n Section Title Symbol SKF – No. Remark GM – No.
S c ioNo. 3.6.1 Gear pump unit with 3L plastic
reservoir for fluid grease
e prewarning signal. The
r
drawing
F-V58E+***
for Parallel systems with pistondistributors (The signal of level switch must bevaluated asmachine has to be switched off afte300 working cycles by PLC) (Minimum-level)
See MFE2-KW3
3.6.2 rvoir for fluid
See drawing
MFE2-KW6F-V58E+***Gear pump unit with 6L plastic resegrease for piston distributor
3.6.3 t unit for gantries Walther quick
See drawing
FB1-M-W-S2+924Compacfor fluid grease. Withdisconnect.
K
No. SKF – No. Remark GM – No. Section Section Title Symbol
3.5.1 Oil gear pump units for piston-distributor with plastic reservoir drawing
-V59+***See MFE5-KW3 MFE5-KW6-V59+***
3.5.2 Oil gear pump units for progressive feeder with plastic reservoir
MF2-KW6-V59+*** MFE2-KW3-V59+***
3.5.3 Oil gear pump units for piston distributor with metal reservoir
ee drawing S MFE5-BW*-V59+***
3.5.4 Oil gear pump units for progressive feeder with metal reservoir
MF*-BW*-V59+*** MFE*-BW*-V59+***
3.5.5 Oil piston pump units for assembly lubrication
See drawing
P-886-BW*-V59
Central Manufacturing Engineering SKF Lubrication Solutions
Page No.: 12 of 49 Document No.: CL-F-SKF Version G1.1 Original Date: 09-15-2009 Revised Date: 11-01-2010
3.7. Piston pumps electrically powered for fluid grease and grease
Remark GM – No. Section Section Title Symbol SKF – No. No.
3.7.1 Piston pumps with or
See drawing KFG1-5W2-V57+924
capacitive level switch ffluid grease
2 kg KFG3-5W2-V57+924 5 kg
3.7.2
itch for
See drawing KFG1-5W1-V57+924
LP
F
Piston pumps with mechanical level swgrease:
2 kg
KFG3-5W1-V57+924 KFA1-M-W-V57+924
5 kg 1 kg
3.8. Control and monitoring units
Symbol SKF – No. Remark GM – No. Section Section Title No. 3.8.1 Level switch for oil -V71WS35-S-XXX
WS35-S30+***
3.8.2 Level switch for fluid BK6.U117-V57 grease
3.8.3 ch,
76-190-000Oil pressure switelectronic
1
IFM: PN7002
3.8.4 Flow monitor micro flow, GS30**
electronic GS40**
171-100-***171-200-***
3.9. Filters
ion Title Symbol SKF – No. Remark GM – No. Section SectNo. 3.9.1 Oil filter
169-460-185 25 µm
3.9.2 Oil filter 169-460-087-V57 10 µm
3.9.3 Oil filter for ms
169-460-260-V57 3 µm oil + air syste
Central Manufacturing Engineering SKF Lubrication Solutions
Page No.: 13 of 49 Document No.: CL-F-SKF Version G1.1 Original Date: 09-15-2009 Revised Date: 11-01-2010
4. Sample lubrication charts
4.1. Single line parallel piston distributors
Central Manufacturing Engineering SKF Lubrication Solutions
Page No.: 14 of 49 Document No.: CL-F-SKF Version G1.1 Original Date: 09-15-2009 Revised Date: 11-01-2010
4.2. Singe line series progressive system
Central Manufacturing Engineering SKF Lubrication Solutions
Page No.: 15 of 49 Document No.: CL-F-SKF Version G1.1 Original Date: 09-15-2009 Revised Date: 11-01-2010
4.3. Grease nipple lubrication
Central Manufacturing Engineering SKF Lubrication Solutions
Page No.: 16 of 49 Document No.: CL-F-SKF Version G1.1 Original Date: 09-15-2009 Revised Date: 11-01-2010
5. Technical data / information
5.1. 320 Metering units for oil and fluid grease with solderless tube connection
Central Manufacturing Engineering SKF Lubrication Solutions
Page No.: 17 of 49 Document No.: CL-F-SKF Version G1.1 Original Date: 09-15-2009 Revised Date: 11-01-2010
5.2. 320 metering units for oil and fluid grease with quick connectors
Central Manufacturing Engineering SKF Lubrication Solutions
Page No.: 18 of 49 Document No.: CL-F-SKF Version G1.1 Original Date: 09-15-2009 Revised Date: 11-01-2010
5.3. 340 piston distributors for oil with solderless tube connection
Central Manufacturing Engineering SKF Lubrication Solutions
Page No.: 19 of 49 Document No.: CL-F-SKF Version G1.1 Original Date: 09-15-2009 Revised Date: 11-01-2010
5.4. 340 Piston distributors for oil with quick connectors
Central Manufacturing Engineering SKF Lubrication Solutions
Page No.: 20 of 49 Document No.: CL-F-SKF Version G1.1 Original Date: 09-15-2009 Revised Date: 11-01-2010
5.5. 340 Piston distributors for fluid grease with solderless tube connection
Central Manufacturing Engineering SKF Lubrication Solutions
Page No.: 21 of 49 Document No.: CL-F-SKF Version G1.1 Original Date: 09-15-2009 Revised Date: 11-01-2010
5.6. 340 Piston distributors for fluid grease with quick connectors
Central Manufacturing Engineering SKF Lubrication Solutions
Page No.: 22 of 49 Document No.: CL-F-SKF Version G1.1 Original Date: 09-15-2009 Revised Date: 11-01-2010
5.7. 350 Piston distributors for oil with solderless tube connection
Central Manufacturing Engineering SKF Lubrication Solutions
Page No.: 23 of 49 Document No.: CL-F-SKF Version G1.1 Original Date: 09-15-2009 Revised Date: 11-01-2010
5.8. 350 Piston distributors for oil with quick connectors
Central Manufacturing Engineering SKF Lubrication Solutions
Page No.: 24 of 49 Document No.: CL-F-SKF Version G1.1 Original Date: 09-15-2009 Revised Date: 11-01-2010
5.9. 350 Piston distributors for fluid grease with solderless tube connection
Central Manufacturing Engineering SKF Lubrication Solutions
Page No.: 25 of 49 Document No.: CL-F-SKF Version G1.1 Original Date: 09-15-2009 Revised Date: 11-01-2010
5.10. 350 Piston distributors for fluid grease with quick connectors
Central Manufacturing Engineering SKF Lubrication Solutions
Page No.: 26 of 49 Document No.: CL-F-SKF Version G1.1 Original Date: 09-15-2009 Revised Date: 11-01-2010
5.11. 390 Piston distributors for oil with solderless tube connection
Central Manufacturing Engineering SKF Lubrication Solutions
Page No.: 27 of 49 Document No.: CL-F-SKF Version G1.1 Original Date: 09-15-2009 Revised Date: 11-01-2010
5.12. 390 Piston distributors for fluid grease with solderless tube connection
Central Manufacturing Engineering SKF Lubrication Solutions
Page No.: 28 of 49 Document No.: CL-F-SKF Version G1.1 Original Date: 09-15-2009 Revised Date: 11-01-2010
5.13. VPG progressive feeder
Central Manufacturing Engineering SKF Lubrication Solutions
Page No.: 29 of 49 Document No.: CL-F-SKF Version G1.1 Original Date: 09-15-2009 Revised Date: 11-01-2010
5.14. VPBG Progressive feeder – for manual grease – nipple systems only
Central Manufacturing Engineering SKF Lubrication Solutions
Page No.: 30 of 49 Document No.: CL-F-SKF Version G1.1 Original Date: 09-15-2009 Revised Date: 11-01-2010
5.15. VPKG Progressive feeder
Central Manufacturing Engineering SKF Lubrication Solutions
Page No.: 31 of 49 Document No.: CL-F-SKF Version G1.1 Original Date: 09-15-2009 Revised Date: 11-01-2010
5.16. VPG-VEN Zone control valve
Central Manufacturing Engineering SKF Lubrication Solutions
Page No.: 32 of 49 Document No.: CL-F-SKF Version G1.1 Original Date: 09-15-2009 Revised Date: 11-01-2010
5.17. Oil + Air unit
Central Manufacturing Engineering SKF Lubrication Solutions
Page No.: 33 of 49 Document No.: CL-F-SKF Version G1.1 Original Date: 09-15-2009 Revised Date: 11-01-2010
5.18. MV Mixing valves for Oil+air lubrication MV20X-20-V58-VS
Central Manufacturing Engineering SKF Lubrication Solutions
Page No.: 34 of 49 Document No.: CL-F-SKF Version G1.1 Original Date: 09-15-2009 Revised Date: 11-01-2010
5.19. KFG1-5W1-V57+924 Piston pump electrically operated for grease NLGI 1/2
Central Manufacturing Engineering SKF Lubrication Solutions
Page No.: 35 of 49 Document No.: CL-F-SKF Version G1.1 Original Date: 09-15-2009 Revised Date: 11-01-2010
5.20. KFG1-5W2-V58+924 Piston pump electrically operated for fluid grease NLGI 0/00/000
Central Manufacturing Engineering SKF Lubrication Solutions
Page No.: 36 of 49 Document No.: CL-F-SKF Version G1.1 Original Date: 09-15-2009 Revised Date: 11-01-2010
5.21. MFE5 – units for oil
MFE5-V59E+***
Central Manufacturing Engineering SKF Lubrication Solutions
Page No.: 37 of 49 Document No.: CL-F-SKF Version G1.1 Original Date: 09-15-2009 Revised Date: 11-01-2010
5.22. MFE5 – units with reservoir for oil
Voltage keys +*** depends on the plants/projects
MFE5-BW3-V59+***
MFE5-KW3-V59+***
MFE5-BW7-V59+***
MFE5-BW16-V59+***
MFE5-BW30-V59+***
Part no. A B C D E F
MFE5-BW3-V59* 220x110 240 170 380 295 170
MFE5-BW7-V59* 300x140 320 220 430 375 250
MFE5-BW16-V59* 400x124 430 305 510 465 285
MFE5-BW30-V59* 430x240 500 380 600 510 430
Central Manufacturing Engineering SKF Lubrication Solutions
Page No.: 38 of 49 Document No.: CL-F-SKF Version G1.1 Original Date: 09-15-2009 Revised Date: 11-01-2010
5.23. MFE5-BW7-V59+***
Central Manufacturing Engineering SKF Lubrication Solutions
Page No.: 39 of 49 Document No.: CL-F-SKF Version G1.1 Original Date: 09-15-2009 Revised Date: 11-01-2010
5.24. MFE2 – units for fluid grease
MFE2-KW3F-V58E+***
MFE2-KW6F-V58E+***
Voltage keys +*** depends on the plants/projects
Central Manufacturing Engineering SKF Lubrication Solutions
Page No.: 40 of 49 Document No.: CL-F-SKF Version G1.1 Original Date: 09-15-2009 Revised Date: 11-01-2010
5.25. MFE2-KW6F-V58E* for fluid grease
Central Manufacturing Engineering SKF Lubrication Solutions
Page No.: 41 of 49 Document No.: CL-F-SKF Version G1.1 Original Date: 09-15-2009 Revised Date: 11-01-2010
5.26. KFB1 lube unit for fluid grease with 1 liter reservoir
Central Manufacturing Engineering SKF Lubrication Solutions
Page No.: 42 of 49 Document No.: CL-F-SKF Version G1.1 Original Date: 09-15-2009 Revised Date: 11-01-2010
5.27. P-886-BW* units for oil
Part no.
A B C D E F G
P-886-BW7-V58* 300x140 270 223 343 219 145 320
P-886-BW16-V58* 400x124 426 255 430 250 176 453
P-886-BW30-V58* 430x240 490 397 520 324 250 500
Central Manufacturing Engineering SKF Lubrication Solutions
Page No.: 43 of 49 Document No.: CL-F-SKF Version G1.1 Original Date: 09-15-2009 Revised Date: 11-01-2010
5.28. Float switch for minimum level with pre-warning WS35-S30+XXX
RD
-ON
GN
-ON
YE
-ON
Mea
sure
men
ts w
itho
ut
tole
rance
s a
re o
rien
tation
va
lue
s fo
r in
form
atio
n o
nly
!
Fu
nction
:F
loat
sw
itch f
or
mo
nito
ring
fo
r m
inim
um
liq
uid
leve
l w
ith
pre
-wa
rnin
g.
25
mm
be
fore
the
min
imum
le
ve
l is
re
ach
ed
co
nta
ct 1
-4 c
loses.
In r
ea
chin
g the
min
imu
m leve
l c
on
tact 1-2
is o
pe
nin
g.
: S
ocke
t (a
ng
led
)O
rde
r N
o. 1
79
-99
0-6
00
Ord
er
No
. 1
79
-99
0-3
72
Acce
sso
rie
s
1)O
utp
uts
/ T
yp
e o
f co
nta
ct
With
perm
issa
ble
de
nsity
max. sw
itchin
g c
urr
ent
max. b
rea
kin
g c
ap
acity
Ope
ratin
g v
oltag
eM
oun
ting p
ositio
n
Tech
nic
al D
ata
:
Dri
lling tem
pla
te fo
r re
se
rvoir c
ove
r
: S
1 -
pre
-wa
rnin
g /
NO
: S
2 -
lo
w L
eve
l /
NC
: 24V
DC
±6
VD
C
: 30
W:
1A
: ve
rtic
al
: -1
0°C
...+
60
°C / 8
0°C
: 0.8
...1
.0g/c
m:
ma
x. 1
50
0m
m /
s
: IP
67
2
3
1)
Hyd
rau
lic s
ym
bol
Fu
nctio
n t
able
Conta
ct
pic
ture
: F
ille
d r
eserv
oir (
maxim
um
)
3 4
PIN 21
-(0
V D
C)
MIN
IMU
M / L
OW
LE
VE
L
FU
NC
TIO
N
+24
V D
C
ON
OF
F
SIG
NA
L
- --
LE
D
RD
YE
GN
2M
INIM
UM
: O
FF
4
+24
V D
C
-(0
V D
C)
31
Cir
cu
it d
iag
ram
2)
M12x1
4 1
3 2
11.25
S1:P
re-w
arn
ing
S2:L
ow
Level
36 18.75 26.25
Order length "L"Ø40.5
Sw
itchin
g p
oin
t S
1
Sw
itchin
g p
oin
t S
2
XX
XX
X
Ord
er:
Whe
n o
rde
ring
, p
lease s
pe
cify th
e r
equ
ire
d o
rder
length
"L".
Min
imu
m o
rder
length
is "
L"=
120
mm
.E
xa
mple
fo
r o
rder:
W
S35
-S3
0/1
50
Le
vel sw
itch
WS
35
-S30
/... ;
Ord
er
length
"L"=
150
mm
45°
Ø31.5+1M3(2x)
N1003
960
11
XX
/XX
/XX
XX
CW
ag
ne
r
NT
SA
5.29.
Central Manufacturing Engineering SKF Lubrication Solutions
Page No.: 44 of 49 Document No.: CL-F-SKF Version G1.1 Original Date: 09-15-2009 Revised Date: 11-01-2010
Float switch for minimum level with pre-warning WS35-2-XXX-V71
Central Manufacturing Engineering SKF Lubrication Solutions
Page No.: 45 of 49 Document No.: CL-F-SKF Version G1.1 Original Date: 09-15-2009 Revised Date: 11-01-2010
5.30. Float switch for fluid grease BK6.U117-V57
Central Manufacturing Engineering SKF Lubrication Solutions
Page No.: 46 of 49 Document No.: CL-F-SKF Version G1.1 Original Date: 09-15-2009 Revised Date: 11-01-2010
5.31. 176-190-000 Digital pressure switch
Central Manufacturing Engineering SKF Lubrication Solutions
Page No.: 47 of 49 Document No.: CL-F-SKF Version G1.1 Original Date: 09-15-2009 Revised Date: 11-01-2010
5.32. Flow monitor, micro flow, electronic GS30* - GS40* - 171-*00-*** 5.33. 169-460-185 Filter 25μm
Central Manufacturing Engineering SKF Lubrication Solutions
Page No.: 48 of 49 Document No.: CL-F-SKF Version G1.1 Original Date: 09-15-2009 Revised Date: 11-01-2010
5.34. 169-460-087-V57 Filter 10μm
Central Manufacturing Engineering SKF Lubrication Solutions
Page No.: 49 of 49 Document No.: CL-F-SKF Version G1.1 Original Date: 09-15-2009 Revised Date: 11-01-2010
5.35. 169-460-260-V57 3μm