Component List for SKF Lubrication Systems Products...Component List for SKF Lubrication Systems...

Component List for SKF Lubrication Systems Products Original date: 01-October-2010

Revised date: 20-April-2016 Version No.: 2.2

File name: Project_Book_2-2_SKF.pdf Original date: 01-October-2010 Revised Date: 01-January-2016

Scope of the Document This document contains product information to be used for the selection of components for FGA E&T-FCA (NAFTA) programs. This document provides a basic guide to selecting the correct type of lubrication system for the correct application. It also provides the necessary contact information to assist in application engineering, program management review, and stocking locations for ease of purchasing. All information contained in this document is superseded by the requirements of the FGA E&T-FCA (NAFTA) Global Specification. A current, and accurate, copy of the specification can be obtaine d from the following web addresses: http://supplierinfo.fiatpowertrain.com https://gsp.extra.chrysler.com/mfg/amedd/powertrain.htm

Document Management Information http://www.skf.com/group/products/lubrication-solutions/lubrication-system-components/specifications-of-the-automotive-industry/index.html. Any printed copy is an uncontrolled copy. The user shall verify with the project engineer that he/she is using the appropriate version of the specification for the specific project he/she is working on. Any questions or comments with respect to this specification should be directed to the project engineer for the specific project in question. Revision Table

Revision Date

DD-Month -YYYY

Version No. Document Name Revision Description

Paragraph Affected Revised By

01-October-2010 1

Original release R. Gomez Eva-M

Tausend

02-February-2011 1.1

FluidPower FPT-CPT SKF

Lubrication Project Book Version

1.1.pdf

Minor formatting changes. - Added KFB1-M-W-XXX - Added ETP unit - Added check valves for progressive feeders - Connectors for cycle switches - Minor drawing revision

2.2.5, 3.10 2.5.4, 3.7 2.11, 3.29

2.12.4, 2.12.5, 3.21.1 3.5.1

D. Schultz

03-February-2012 1.2



1.2.pdf

Correction made to 3/4" Female Quick Coupling read 995-001-521, which is 3/4" Male; changed to 995-001-519

2.17.2

R. Reynolds

File name: Project_Book_2-2_SKF.pdf Original date: 01-October-2010 Revised Date: 01-January-2016 Page No.: 2 of 76

http://supplierinfo.fiatpowertrain.com/


https://gsp.extra.chrysler.com/mfg/amedd/powertrain.htm

http://www.skf.com/group/products/lubrication-solutions/lubrication-system-components/specifications-of-the-automotive-industry/index.html

http://www.skf.com/group/products/lubrication-solutions/lubrication-system-components/specifications-of-the-automotive-industry/index.html

Revision Date

DD-Month -YYYY

Version No. Document Name Revision Description Paragraph

Affected Revised By

27-June-2012 1.3



1.3.pdf

Replaced all FPT logo with new FP logo, as requested by John H. Janssen Jr., Chrysler LLC Revised voltage code +564 to +1FV; and added note "...FP projects in China use voltage code +1FW"

3.0 R. Reynolds

01-October-2012 1.4



1.4.pdf

Added note "...FP projects in Brazil use voltage code +MDG", as requested by Mr. Giuliano of Fiat.

R. Reynolds

19-December-2012 1.5

Added missing technical drawings for all. Revised contact to Mr. Angelo Giuliano

1.1 R. Reynolds

26-March-2013 1.6

Added order form as requested by Dario Canevari of Fiat; and other general updates

R. Reynolds

19-June-2013 1.7

Fiat Powertrain is now Fiat Group Automobiles S.p.A. Engine and Transmission; replaced old logo & company name with new on all pages

R. Reynolds

12-December-2013 1.8

FCA_SKF_Project_Book_version_1_8.

pdf

- Removed MFE1-BW* Pumps - Added 3D Model - Update filter part numbers - Added Orsco information - Modified drawing for legibility - Updated quick disconnect part numbers - Removed MFE1-BW* Pumps - Added link to technical data brochure - Changed drawing - Added quick disconnect note - Added link to technical data brochure - Added link to technical data brochure - Added link to technical data brochure - Updated filter part numbers - Added link to technical data -brochure - Added Orsco Drawings

2.4 2.5.3 2.17.1 2.24 3.1.7 3.3

3.6 3.7

3.8 3.10

3.12.1 - 3.22

3.26, 3.27

3.30 - 3.34

3.37

3.41, 3.42

3.44-3.46

S. Moninger


Revision Date

DD-Month -YYYY


Affected Revised By

24-November-2014 1.9


pdf

- Removed FIAT logo. Added new FCA logo. - Added VTEC VectoLub full modular eMQL - Added AC-3790-C2 VectoLub spray nozzle - Added MOD-032 VectoLub reservoir assembly - Added VTEC-522915 technical drawing - Added AC-3790-C2 technical drawing - Added MOD-032-NC technical drawing

All

2.24

2.24

2.24

3.46

3.47

3.48

R. Reynolds

1-July-2015 2.0 FCA_SKF_Project_Book_version_2_0.

pdf

- Removed Chrysler Logo - Changed contacts to Mr. Mauro Falletti and Mr Christian Heider, updated FP and CPT to FCA (EMEA, LATAM, APAC) and FCA (NAFTA) - Updated CPT and FP to FCA (NAFTA) and FCA (EMEA, LATAM, APAC) - Changed image to match part number - Changed drawing to match part number - Changed drawing to FCA version of VSR System

All 1.1

2.1 – 2.5, 2.18, 2.22, 2.24, 3.0,

3.1, 3.6, 4.0 2.14

3.28

3.44

S. Moninger

4-December-2015 2.1


pdf

- Updated contact information for Mr. Christian Heider - Corrected note for grease filter - Changed part number to DSC3-A100K-3A2B corrected temperature range - Removed part number - Removed drawing added link to brochure - Removed drawing - Removed drawing added link to brochure - Removed drawing added link to brochure

1.1

2.3.2 2.14.1

2.14.2 3.23 – 3.25

3.28 3.29

3.39, 3.40,

3.43

S. Moninger


Revision Date

DD-Month -YYYY


Affected Revised By

26-May-2016 2.2 Project_Book_2-

2_SKF.pdf

Revised format of Revision Table - Moved Contact List before Table of Contents and updated contacts - Updated Contact List with FCA Engineering Contacts - Updated format and hyperlinks - Removed hydraulic symbols - Added part number for units with ultrasonic level switch (-BWU*/-KWU*) - Added ultrasonic level switch - Corrected quick coupler descriptions - Removed dimension data and drawing - Removed drawing and added hyperlink to brochure - Renumbered sections as required

1

1.1

TOC 2

2.1, 2.2.1, 2.2.2, 2.3,

2.4 2.15 2.18

3.4, 3.5, 3.6

3.36, 3.37, 3.46, 3.47

All

S. Moninger


1. SKF Lubrication Systems Persons to Contact

NAFTA EMEA

Name Frank Casinelli Uwe Lipinski

Company SKF Lubrication Business Unit SKF Lubricat ion System s Germ any Gm bh

Address 15918 Patriot Ln. Macomb, MI 48044

Motzener Straße 35/37 - 12277 Berlin - Germany

Phone 248-982-7411 01149-30-72002265

Fax 01149-30-72002481 Email [email protected] [email protected]

APAC LATAM

Name Frank Allgeier Dennis Heil

Company SKF Lubrication Systems Japan Ltd.

SKF Lubrication Systems Germany GmbH

Address 2-16-20 Hishie Higashi-Osaka, 578-0984 Japan

Motzener Straße 35/37 - 12277 Berlin - Germany

Phone +81 (0)72 964 5055 +49 30 72002520 Fax +81 (0)72 964 1619

Email [email protected] [email protected] 1.1 FCA (EMEA, LATAM, APAC) and FCA (NAFTA) C ontacts

FCA (EMEA, LATAM, APAC) & FCA (NAFTA)

FCA EMEA, LATAM, APAC FCA NAFTA

Address Corso Settembrini 167-10135 Torino (TO) Gate 19 Loft B

Website http://supplierinfo.fiatpowertrain.com/ https://gsp.extra.chrysler.com/mfg/amedd/control/index.htm

Project Contact Mr. Mauro Falletti Christian Heider Company FCA EMEA Strategic Planning

CoC Controls & Standardization Support FCA US LLC

Office +39 (011) 0033-099 +1 (248) 249-3021 Mobile

Fax E-Mail [email protected] christian.heider @fcagroup .com



https://gsp.extra.chrysler.com/mfg/amedd/control/index.htm

https://gsp.extra.chrysler.com/mfg/amedd/control/index.htm

Table of Contents

Document Management Information ................................................................................................................................. 2

1. SKF Lubrication Systems Persons to Contact ................................................................................................................ 6

1.1 FCA (EMEA, LATAM, APAC) and FCA (NAFTA) Contacts.................................................................................. 6

Table of Contents ....................................................................................................................................................................... 7

2.0 List of Components ...................................................................................................................................................... 10

2.1 Pumps for Single Line Parallel Piston Distributors for Oil ...................................................................................... 10

2.2 Pumps for Single Line Parallel Piston Distributors for Fluid Grease ...................................................................... 12

2.3 Pumps for High Speed Spindle Lubrication Oil+Air ................................................................................................. 13

2.4 Pumps for Progressive Systems for Oil ..................................................................................................................... 14

2.5 Piston Pumps for Progressive Systems for Grease .................................................................................................... 15

2.6 Single Line Parallel Piston Distributors for Oil ........................................................................................................ 16

2.7 Single Line Parallel Piston Distributors for Fluid Grease ........................................................................................ 17

2.8 Manifolds for Single Point Piston Distributors ......................................................................................................... 18

2.9 Oil+Air Metering Units ............................................................................................................................................. 18

2.10 Progressive Feeders .................................................................................................................................................. 19

2.11 Check Valves for Progressive Feeders ...................................................................................................................... 20

2.12 Cycle Switches and Connectors for Progressive Feeder ........................................................................................... 21

2.13 Over Pressure Indicators for Progressive Feeder ..................................................................................................... 21

2.14 Electronic Pressure Switch ........................................................................................................................................ 22

2.15 Ultrasonic Level Switch with I/O Link ....................................................................................................................... 22

2.16 Flow Monitors for Piston Distributor Systems .......................................................................................................... 22

2.17 Oil+Air Streak Sensor ............................................................................................................................................... 23

2.18 Filter .......................................................................................................................................................................... 23

2.19 Quick disconnect couplings - FCA (NAFTA) ONLY! ................................................................................................ 24

2.20 Glycerine filled pressure gauges ............................................................................................................................... 25

2.21 Solenoid valves .......................................................................................................................................................... 25

2.21 Vario Units for MQL systems .................................................................................................................................... 27

2.23 DigitalSuper Units for MQL systems ......................................................................................................................... 28

2.24 Aerosol Monitor for MQL systems ............................................................................................................................ 28

2.25 Oil/Air for Part Lubrication ...................................................................................................................................... 29


3.0 Technical Information and Drawings ........................................................................................................................ 30

3.1 MFE-Pumps for Piston Distributor System for Oil ................................................................................................... 30

3.1.1 Standard Dimensions of Reservoirs: 3, 6 and 15 liter (all dimensions are in mm) ................................................... 31

3.1.2 Standard Dimensions of Reservoirs: 30 and 50 liter (all dimensions are in mm) ..................................................... 31

3.1.3 MFE5-KW3-C100 ...................................................................................................................................................... 33

3.1.4 MFE5-BW3-C100 ...................................................................................................................................................... 34

3.1.5 MFE5-KW3-F100 ...................................................................................................................................................... 35

3.1.6 MFE5-BW3-F100 ...................................................................................................................................................... 36

3.1.7 P-886-BWW*-C100 ................................................................................................................................................... 37

3.2 Angle Bracket for Filter Assembly ............................................................................................................................. 38

3.3 Quick Disconnect Coupling ....................................................................................................................................... 39

3.4 Glycerine Filled Pressure Gauges ............................................................................................................................. 40

3.5 MFE-Pumps for Piston Distributors for Fluid Grease .............................................................................................. 41

3.5.1 MFE2-KW*F-C100 ................................................................................................................................................... 42

3.5.2 MFE2-KW*F-F100 ................................................................................................................................................... 43

3.6 MF Pumps for Progressive systems for oil ................................................................................................................ 44

3.6.1 MF1-BW*-C100 ........................................................................................................................................................ 45

3.6.2 MF1-BW*-F100 ........................................................................................................................................................ 46

3.7 Compact Greaser ETPxWZ-xxxxx-x+924 ................................................................................................................. 47

3.8 KFG1-5W2x-V71+924 Piston Pump for Progressive Systems for Fluid Grease ...................................................... 48

3.9 KFG1-5W1x-V71+924 Piston Pump for Progressive Systems for Grease ................................................................ 49

3.10 KFB1-M-W+924........................................................................................................................................................ 50

3.11 KFA1-M-WA-V71+924 Pumps for Progressive Systems for Grease ........................................................................ 51

3.12 Piston Distributor 341 and Manifolds ....................................................................................................................... 52

3.13 Piston Distributor 342,343,345 Series ...................................................................................................................... 52


3.15 Piston Distributor 352,353,355 Series ...................................................................................................................... 52


3.17 Piston Distributor 392, 393 Series; ........................................................................................................................... 52

3.18 Oil + Air Mixing Valves, MV20x-100-xxxxxxxx ....................................................................................................... 52

3.19 Progressive Feeder VPG ........................................................................................................................................... 52

3.20 Progressive Feeder VPKG ........................................................................................................................................ 52

3.21 Progressive Feeder VPBG Sizes ................................................................................................................................ 52

3.22 Modular Feeder PSG2............................................................................................................................................... 52

3.23 Cycle Switch 177-300-094 for VP and PSG progressive feeders .............................................................................. 52


3.24 Cycle Switch 177-300-095 for VPK progressive feeders ........................................................................................... 53

3.25 Cycle Switch 177-300-097 for VPB progressive feeders ........................................................................................... 53

3.26 Cycle Switch Connectors for Progressive Feeders .................................................................................................... 53

3.27 Overpressure Indicators for Progressive Feeders ..................................................................................................... 53

3.28 Pressure Switches ...................................................................................................................................................... 53

3.29 Ultrasonic Level Switch ............................................................................................................................................. 54

3.30 Flow Monitor GS300 ................................................................................................................................................. 55

3.31 Oil + Air Streak Sensor GS4011-S… ......................................................................................................................... 55

3.32 2/2 Way Directional Valve for Oil and Grease - 161-110-031+924 ......................................................................... 55

3.33 3/2 Way Directional Valve for Oil and Grease - 161-120-064+924 ......................................................................... 55

3.34 4/2 Way Directional Valve for Oil - 161-140-050+924 ............................................................................................ 55

3.35 Zero Leakage 2/2 Way Valve for Oil - VPG-VEN-V71A+924 ................................................................................... 56

3.36 Zero Leakage 2/2 Way Valve with Union Block - VPG-VEN-V71+924 .................................................................... 57

3.37 Filter .......................................................................................................................................................................... 58

3.38 Check Valves for Progressive Feeders ...................................................................................................................... 59

3.39 Lubrilean Vario UFV10-014-2 .................................................................................................................................. 59

3.40 Lubrilean VarioPlus UFV10-019-2 ........................................................................................................................... 59

3.41 Lubrilean VarioSuper ................................................................................................................................................ 59

3.42 Lubrilean DigitalSuper .............................................................................................................................................. 59

3.43 Lubrilean Aerosol Monitor AM1000 ......................................................................................................................... 59

3.44 VSR System for Part Lubrication with External Controls ......................................................................................... 60

3.45 LGPTN Spray Nozzle Assemblies for Oir/Air ............................................................................................................ 61

3.46 VTEC-522915, VectoLub Full Modular External MQL system ................................................................................. 62

3.47 AC-3790-C2, VectoLub Spray Block with Nozzle Assembly ..................................................................................... 63

3.48 MOD-032, VectoLub 6 L Plastic Reservoir Assembly .............................................................................................. 63

ORDER FORM ....................................................................................................................................................................... 64


2.0 List of Components 2.1 Pump s for S ingle Line Parallel Piston Distributors for Oil

Photo ORDER CODE DESCRIPTION RESERVOIR Notes

2.1.1

MFE5-KW3-C100+1FV MFE5-KW6-C100+1FV

MFE5-KWU3-C100+1FV MFE5-KWU6-C100+1FV

FCA (NAFTA) only Gear pump for oil Flow rate: 0,5 ltr/min Pressure: 27 bar Electrical: 220-240 / 380-420V @ 50 Hz; 254-280/440-460V @ 60Hz; both +/- 5%, UL/SCA

3l plastic reservoir 6l plastic reservoir 3l plastic reservoir 6l plastic reservoir

FCA (NAFTA) ONLY Quick fill to be ordered separately. See section 3.3. Standard components: • Filter w/ dirt indicator • Pressure gauge • Low level float switch or

Ultrasonic Level Switch w/ I/O Link (-KWU* units) • Breather

2.1.2

MFE5-BW3-C100+1FV MFE5-BW7-C100+1FV

MFE5-BW16-C100+1FV MFE5-BW30-C100+1FV MFE5-BW50-C100+1FV

MFE5-BWU3-C100+1FV MFE5-BWU7-C100+1FV

MFE5-BWU16-C100+1FV MFE5-BWU30-C100+1FV MFE5-BWU50-C100+1FV


3l metal reservoir 6l metal reservoir 15l metal reservoir 30l metal reservoir 50l metal reservoir 3l metal reservoir 6l metal reservoir 15l metal reservoir 30l metal reservoir 50l metal reservoir

FCA (NAFTA) ONLY ! Quick fill to be ordered separately. See section 3.3. Standard components: • Filter w/ dirt indicator • Pressure gauge • Low level float switch or

Ultrasonic Level Switch w/ I/O Link (-BWU* units) • Breather

2.1.3

MFE5-KW3-F100+140 MFE5-KW6-F100+140

MFE5-KWU3-F100+140 MFE5-KWU6-F100+140

FCA (EMEA, LATAM, APAC) only Gear pump for oil Flow rate: 0,5 ltr/min Pressure: 27 bar Electrical: 400V, 3PH, 50Hz

3l plastic reservoir 6l plastic reservoir 3l plastic reservoir 6l plastic reservoir

FCA (EMEA, LATAM, APAC) Only ! Standard components: • Filter w/ dirt indicator • Pressure gauge • Low level float switch or


Return to Table of Contents


2.1.4

MFE5-BW3-F100+140 MFE5-BW7-F100+140

MFE5-BW16-F100+140 MFE5-BW30-F100+140 MFE5-BW50-F100+140

MFE5-BWU3-F100+140 MFE5-BWU7-F100+140

MFE5-BWU16-F100+140 MFE5-BWU30-F100+140 MFE5-BWU50-F100+140

FCA (EMEA, LATAM, APAC) only

Gear pump for oil Flow rate: 0,5 ltr/min

Pressure: 27 bar Electrical: 400V,

3PH, 50Hz

3l metal reservoir 6l metal reservoir 15l metal reservoir 30l metal reservoir 50l metal reservoir 3l metal reservoir 6l metal reservoir 15l metal reservoir 30l metal reservoir 50l metal reservoir

FCA (EMEA, LATAM, APAC) Only! Standard components: • Filter w/ dirt indicator • Pressure gauge • Low level float switch or


2.1.5

P-886-BWW7-C100 P-886-BWW16-C100

P-886-BWU7-C100

P-886-BWU16-C100

FCA (NAFTA) Only Piston pumps for oil Volume/stroke: 30cc Oil Pres max: 25bar Air Pres max: 10bar

7l metal reservoir 16l metal reservoir

FCA (NAFTA) Only! Quick fill to be ordered separately. See section 3.3. Standard components: • Filter w/ dirt indicator • Pressure gauge • High and Low level float switch or




2.2 Pumps for Single Line Parallel Piston Distributors for Fluid Grease


2.2.1

MFE2-KW3F-C100+1FV MFE2-KW6F-C100+1FV

MFE2-KWU3F-C100+1FV MFE2-KWU6F-C100+1FV

FCA (NAFTA) only Gear pump for fluid grease Flow rate: 0,2 ltr/min Pressure: 38 bar Electrical: 220-240 / 380-420V @ 50 Hz; 254-280/440-460V @ 60Hz; both +/- 5%, UL/SCA

3l plastic reservoir 6l plastic reservoir


FCA (NAFTA) Only! Quick fill to be ordered separately. See section 3.3. Use with 213-900 grease filter in section 2.17 -KWU* units include Ultrasonic Level Switch w/ I/O Link

2.2.2

MFE2-KW3F-F100+140

MFE2-KW6F-F100+140

MFE2-KWU3F-F100+140 MFE2-KWU6F-F100+140

FCA (EMEA, LATAM, APAC) only only Gear pump for fluid grease Flow rate: 0,2 ltr/min Pressure: 38 bar Electrical: 400V, 3PH, 50Hz



FCA (EMEA, LATAM, APAC) Only! Use with 213-900 grease filter in section 2.17 -KWU* units include Ultrasonic Level Switch w/ I/O Link

2.2.3

KFB1-M-W+924

Gear pump for Fluid grease unit for 5-15 points Max Flow rate: 50 cm³/min Pressure: 38 bar Electrical: 24VDC

1.4l plastic reservoir FCA (NAFTA) Only!



2.3 Pumps for High Speed Spindle Lubrication Oil+Air


2.3.1

MFE5-KW3-C100+1FV 3 phase motor

MFE5-KWU3-C100+1FV

3 phase motor


3l plastic reservoir


FCA (NAFTA) only! Quick fill to be ordered separately. See section 3.3. Standard components: • Filter w/ dirt indicator • Pressure gauge • High and Low level float switch or


2.3.2

MFE5-KW3-F100+140 3 phase motor

MFE5-KWU3-F100+140

3 phase motor

FCA (EMEA, LATAM, APAC) only Gear pump for oil Flow rate: 0,5 ltr/min Pressure: 27 bar Electrical: 400V, 3PH, 50Hz



FCA (EMEA, LATAM, APAC) Only! Standard components: • Filter w/ dirt indicator • Pressure gauge • High and Low level float switch or




2.4 Pumps for Progressive Systems for O il


2.4.1

MF1-BW7-C100+1FV

MF1-BWU7-C100+1FV

FCA (NAFTA) only For circulating systems Flow rate: 0,1 ltr/min Pressure: 60 bar Electrical: 220-240 / 380-420V @ 50 Hz; 254-280/440-460V @ 60Hz; both +/- 5%, UL/SCA

6l metal reservoir

6l metal reservoir

FCA (NAFTA) ! Quick fill to be ordered separately. See section 3.3. -BWU7 units include Ultrasonic Level Switch w/ I/O Link

2.4.2

MF1-BW7-F100+140

MF1-BWU7-F100+140

FCA (EMEA, LATAM, APAC) only For circulating systems Flow rate: 0,1 ltr/min Pressure: 60 bar Electrical: 400V, 3PH, 50Hz

6l metal reservoir 6l metal reservoir

FCA (EMEA, LATAM, APAC) only! -BWU7 units include Ultrasonic Level Switch w/ I/O Link



2.5 Piston Pumps for Progressive Systems for Grease

Photo ORDER CODE DESCRIPTION Notes

2.5.1

KFG1-5W2A-V71+924 KFG1-5W2B-V71+924 KFG1-5W2C-V71+924 KFG1-5W2D-V71+924

Q= 2,5cm³/min Q= 1,8cm³/min Q= 1,3cm³/min Q= 0,8cm³/min Electric piston pump for grease, 24VDC

Quick fill to be ordered separately. See section 3.3.

2.5.2

KFG1-5W1GA-V71+924 KFG1-5W1GB-V71+924 KFG1-5W1GC-V71+924 KFG1-5W1GD-V71+924

Q= 2,5cm³/min Q= 1,8cm³/min Q= 1,3cm³/min Q= 0,8cm³/min Electric piston pump for fluid grease, 24VDC


2.5.3

KFA1-M-WA-V71+924 KFA1-M-WB-V71+924 KFA1-M-WC-V71+924

Q= 2,0cm³/min Q= 1,5cm³/min Q= 1,0cm³/min Electric piston pump for grease, 24VDC


FCA (NAFTA) Only!

2.5.4

ETP-X-WZ-XXXXX+924

Grease unit for 5 points or less. Metering: 10 mm3/stroke, 15 mm3/stroke, 20 mm3/stroke

FCA (NAFTA) Only!



2.6 Single Line Parallel Piston D istributors for O il


2.6.1

341-1XX-X0000-00 351-0XX-X0000-00 391-000-X0000-00

Single piston distributor for oil



0.01 to 0.16 cm3

0.05 to 0.60 cm3

0.20 to 1.50 cm3

2.6.2

342-4XX-XX000-XX 343-4XX-XXX00-XX 345-4XX-XXXXX-XX

Standard piston distributor for oil

2.6.3



2.6.4

392-000-XX000-XX 393-000-XXX00-XX




2.7 Single Line Parallel Piston Distributors for Fluid G rease


2.7.1

341-7XX-X0000-00 351-1XX-X0000-00 391-100-X0000-00

Standard piston distributor for fluid grease Standard piston distributor for fluid grease Standard piston distributor for fluid grease

0.01 to 0.16 cm3

0.05 to 0.60 cm3

0.10 to 0.30 cm3

2.7.2


Standard piston distributor for fluid grease

2.7.3



2.7.4

392-100-XX000-XX 393-100-XXX00-XX




2.8 Manifolds for Single Point Piston D istributors


2.8.1

VL-0xAAG1 VL-0xAAG2 VL-0xAAM1 VL-0xAAM2

G 1/8 G 1/4 M10x1 M14x15 Manifolds for 341 series

To be used with 341 single piston distributors

2.8.2

VL-0xBAG1 VL-0xBAG2 VL-0xBAM1 VL-0xBAM2



2.8.3

VL-0xCAG1 VL-0xCAG2 VL-0xCAM1 VL-0xCAM2



2.9 Oil+Air Metering U nits


2.9.1

MV20x-100-xxxxxxxx Oil+Air metering unit For use in Oil+Air Systems using the MFE5-KW3-C100+1FV



2.10 Progressive Feeders


2.10.1

VPG

Progressive sectional feeder Metered quantity of lubricant:0,1-1,2 cm³/stroke Threaded inlet port: G1/4 Threaded outlet port: G1/8

2.10.2

VPKG

Progressive sectional feeder Metered quantity of lubricant:0,05÷0,6 cm³/stroke Threaded inlet port: G1/8 Threaded outlet port: G1/8

2.10.3

VPBG

Progressive block feeder Metered quantity of lubricant:0,2 cm³/stroke Threaded inlet port: G1/8 Threaded outlet port: G1/8

2.10.4

PSG2

Progressive sectional feeder Metered quanitity of lubricant: 0,06 - 0,84 cm³/stroke Threaded inlet port: G1/4 Threaded outlet port: G1/4



2.11 Check Valve s for Progressive F eeders


2.11.1

VPG-RV VPG-RV6 VPG-RV8

G1/8, ø 4mm, 10 bar G1/8, ø 6mm, 10 bar G1/8, ø 8mm, 10 bar

With sleeve fitting and compression nut

2.11.2 VPKG-RV G1/8, ø 6mm, 3 bar

2.11.3

VPKG-RV-VS G1/8, ø 6mm, 3 bar Quick connection



2.12 Cycle S witches and Connectors for Progressive Feeder


2.12.1 177-300-094

3 wires cycle switch for

VP/PSG NC contact, connection: M12x1

2.12.2 177-300-095 3 wires cycle switch for VPK NC contact, connection: M12x1

2.12.3 177-300-097 3 wires cycle switch for VPB NC contact, connection: M12x1

2.12.4

179-990-600

Straight Socket w/ 5 m cable

for 177-300-094, 177-300-095,

and 177-990-097 cycle switches

4 pole; UL-CSA approved

179-660-601

Elbow Socket w/ 5 m cable for

177-300-094, 177-300-095, and 177-990-097

cycle switches

4 pole; UL-CSA approved

2.13 Over Pressure I ndicators for Progressive Feeder


2.13.1

VPG-UE16-2 VPG-UE32-2 VPG-UE63-2 VPG-UE80-2

VPG-UE100-2 VPG-UE50-3

VPG-UE100-3 VPG-UE150-3 VPG-UE200-3

16 bar - 232 PSI - 1.6 MPa 32 bar - 464 PSI - 3.2 MPa 63 bar - 915 PSI - 6.3 MPa 80 bar - 1160 PSI - 8 MPa

100 bar - 1450 PSI - 10 MPa 50 bar - 725 PSI - 5 MPa

100 bar - 1450 PSI - 10 MPa 150 bar - 2175 PSI - 15 MPa 200 bar - 2900 PSI - 20 MPA



2.14 Electronic Pressure Switch


2.14.1

DSC3-A100K-3A2B

Electronic pressure switch, Rated Pressure: Max 100 bars. Permissible overpressure: 200 bars Ambient and Fluid temperature range: -25 to + 80 C IP 67 rating

M12x1, 4-pins

2.15 Ultrasonic Level Switch with I/O Link


2.15.1

995-800-135

Ultrasonic Level Switch w/ I/O Link 4-20 mA analog output Sensing range: 800 mm Blind Zone: 60 mm IP 67 Rating

M12x1, 4-pins

Replacment for WS35-***, BK6.U117-V57, BK6.U118-V57 Level Switches

2.16 Flow Monitors for Piston Distributor S ystems


2.16.1

GS300 24VDC Flow range: 0,01-0,6cc/cycle



2.17 Oil+Air Streak S ensor


2.17.1

GS4011-S20 GS4011-S50

Oil+air streak sensor, 120 - 600 mm³/hr Oil+air streak sensor, 60 - 120 mm³/hr

2.18 Fil ter


2.18.1

169-460-099-V57 169-460-087-V70

169-460-185

3 µm - Oil 10µm - Oil 25µm - Oil

Oil pressure line with electrical contamination indicator, electrical connection: 24VDC,4pin

connector, M12x1

2.18.2

213-900

25 µm - Grease Screen filter for grease.

Flow rate - 2 l/min. Max operating pressure - 45 bar

Connection - M14x1.5



2.19 Quick disconnect coupling s - FCA (NAFTA) ONLY!


2.19.1

995-003-534 995-003-527 995-003-528

3/8” 5/8” 3/4” Complete quick disconnect with coupler, strainer and housing

FCA (NAFTA) Only! All quick disconnections must be approved by AME control’s engineering and chemical management. See section 3.3

2.19.2

995-003-529 995-002-096 995-003-530 995-003-531 995-003-532

995-005-088 995-005-096 995-005-097 995-003-533 995-005-521

1/8” 1/4” 3/8” 1/2” 3/4” 1/8” 1/4” 3/8” 1/2” 3/4” Complete quick disconnect with coupler, strainer and housing


2.19.3

995-001-228 995-003-517

995-001-227 995-003-518

3/8” 1/2” 3/8” 1/2” Complete quick disconnect with coupler, strainer and housing




2.20 Glycerine filled pressure gauges


2.20.1

169-104-015 169-110-015 169-125-015

0-40 bar / 0-580 PSI / 0-4 MPa 0-100 bar / 0-1450 PSI / 0 - 10 MPa 0-250 bar / 0-3625 / 0-25 MPa Glycerine pressure gauge, G1/4 face in MPA, PSI, bar

2.21 Solenoid valves


2.21.1

161-110-031+924 2/2 way valve For OIL and GREASE

2.21.2

VPG-VEN-V71A+924 2/2 way Zero Leakage Valve For OIL



2.21.3

VPG-VEN-V71+924

2/2 way Zero Leakage Valve with Union Block for remote

mounting

FOR OIL

2.21.4

161-120-064+924

3/2 way valve

For OIL and GREASE

2.21.5

161-140-050+924 4/2 way valve

FOR OIL



2.21 Vario Units for MQL systems


2.22.1

UFV10-014-2

Lubrilean Vario 1.8 liter capacity Internal or external lubrication Compressed air port: Min: 6 bars Optional: 8 bars Max: 10 bars Manual slide valve actuation

Can be used with SKF LubriOil or SKF LubriFluid. See page 15 of brochure 1-5102-EN

2.22.2

UFV10-019-2

Lubrilean Vario Plus 1.8 liter capacity Internal or external lubrication Compressed air port: Min: 6 bars Optional: 8 bars Max: 10 bars 24 VDC actuation Level monitoring for 4 points


2.22.3

UFV30-003

Lubrilean Vario Super 1.8 liter capacity Internal or external lubrication Compressed air port: Min: 6 bars Optional: 8 bars Max: 10 bars 24 VDC actuation Level monitoring for 2 points Pressure monitoring




http://www.skf.com/binary/21-32233/1-5102-EN.pdf



2.23 Digital Super Units for MQL systems


2.23.1

UFD10-020

Lubrilean Digital Super 1 1.8 liter capacity Internal or external lubrication Compressed air port: Min: 6 bars, Optional: 8 bars, Max: 10 bars 24 VDC actuation Level monitoring for 4 points Flow sensor Pressure monitoring

Requires FCA (EMEA, LATAM, APAC)-FCA (NAFTA) Controls engineering prior approval. Can be used with SKF LubriOil or SKF LubriFluid. See page 15 of brochure 1-5102-EN

2.23.2

UFD20-020

Lubrilean Digital Super 2 For machining centers with double spindles or turning machines with two turrets 1.8 liter capacity Internal or external lubrication Compressed air port: Min: 6 bars, Optional: 8 bars, Max: 10 bars 24 VDC actuation Level monitoring for 4 points Flow sensor Pressure monitoring

Requires FCA (EMEA, LATAM, APAC)- FCA (NAFTA) Controls engineering prior approval Can be used with SKF LubriOil or SKF LubriFluid. See page 15 of brochure 1-5102-EN

2.24 Aerosol Monitor for MQL systems


2.24.1

AM1000 Aerosol monitor

ACCESSORIES Spray blocks, nozzles and coaxial tubes see brochure 1-5102-EN






2.25 Oil/Air for Part Lubrication

Photo ORDER CODE DESCRIPTION NOTES

2.25.1

VSR-GD-XY VSR System for part lubrication with external controls

FCA (NAFTA) Only !

2.25.2

LGTPN-X-NY-XX-XXX LGTCN-X-NY-XX-XXX LGTFN-X-NY-XX-XXX

LGTPN spray nozzle assemblies for oil/air

FCA (NAFTA) Only!

2.25.3

VTEC-522915 VTEC-xxx-xxx-xxx+xxx

VectoLub full modular external MQL system

FCA (EMEA, LATAM, APAC) Only!

2.25.4

AC-3790-C2 AC-xxxx-C2

VectoLub spray blocks, nozzles and coaxial tubes


2.25.5

MOD-032 MOD-032-NC

VectoLub 6 L plastic reservoir assembly


ACCESSORIES For SKF VectoLub - Spray blocks, nozzles and coaxial tubes see brochure 1-4402-EN




3.0 Technical Information and Drawings Voltage key for electric motors: For FCA (NAFTA) plants - 480 Volts, 3PH, 60 Hz: SKF voltage key: +1FV For FCA (EMEA, LATAM, APAC) plants - 400 Volts, 3PH, 50 Hz. SKF voltage key: +140 For direct current pumps (KFG & KFA) the operating voltage is 24 VDC. SKF voltage key: +924 For FCA (EMEA, LATAM, APAC) Projects in China 220/380V, 50Hz +/- 10% "CCC" motor; SKF voltage key: +1FW For FCA (EMEA, LATAM, APAC) Projects in Brazil 460V, 60Hz +/- 10% "CCC" motor; SKF voltage key: +MDG Quick disconnects FCA (EMEA, LATAM, APAC) units include a manual fill with strainer only. FCA (NAFTA) units include a blank plate where a quick disconnect must be installed. A list of quick disconnect couplings can be found in section 3.3. Any drawing, graphic or photo showing a quick disconnect is for representative purposes only. Quick disconnects must be ordered separately

3.1 MFE-Pump s for Piston Distributor System for Oil MFE Brochure and Technical Information, Publication 1-1202-EN Technical data gear pump units: Output: 0,5 l/min Max. back pressure: 27 bar Operating viscosity: 20 to 1500 mm²/s Medium: Mineral- or synthetic oil compliant with: plastics, NBR- elastomers, copper and copper alloys Operating temperatur: +10 to +40 °C Summary of MFE -pumps for piston distributor system for FCA (NAFTA)MFE5-KW3-C100+xxx MFE5-KW6-C100+xxx

MFE5-BW3-C100+xxx MFE5-BW7-C100+xxx MFE5-BW16-C100+xxx

MFE5-BW30-C100+xxx MFE5-BW50-C100+xxx

Summary of MFE -pumps for piston distributor system for FCA (EMEA, LATAM, APAC)MFE5-KW3-F100+xxx MFE5-KW6-F100+xxx

MFE5-BW3-F100+xxx MFE5-BW7-F100+xxx MFE5-BW16-F100+xxx

MFE5-BW30-F100+xxx MFE5-BW50-F100+xxx

All gear pump units for piston distributor parallel system are without filter and quick disconnects.

Depending on applications and plants filter and/or quick disconnects can be assembled.

Quick disconnects must be ordered separately! See section 3.3.



Page No.: 30 of 76


3.1.1 Standard D imensions of Reservoirs: 3, 6 and 15 liter (all dimensions are in mm)

Reservoir capacity [liter]

Height [mm] H

H1

H2 *

Width [mm] B

B1

B2

Depth [mm] T

T1 *

T2 *

Center distance [mm] D1

D2

Whole Ø[mm] D

3 plastic --- 154 350 245 320 320 135 --- --- 220 17,5 7 6 plastic --- 183 380 290 390 390 178 --- --- 220 20 8,5 3 metal 152 170 365 238 315 315 134 220 220 220 110 7 6 metal 216 236 430 320 360 380 142 210 250 300 140 9 15 metal 250 304 500 436 475 490 180 260 285 400 124 9

Units for FCA (EMEA, LATAM, APAC) Units for FCA (NAFTA)

Please notice: FCA (EMEA, LATAM APAC) units include manual fill with strainer only. FCA (NAFTA) units include a blank plate where a quick disconnect must be installed . Quick fill disconnect MUST BE ORDERED SEPARATELY . Please see section 3.3.

Representative only!! See note below

Return to Table of Contents File name: Project_Book_2-2_SKF.pdf Original date: 01-October-2010 Revised Date: 01-January-2016 Page No.: 31 of 76

3.1.2 Standard Dimensions of Reservoirs: 30 and 50 liter (all dimensions are in mm)

Reservoir capacity [liters]

Reservoir Center- Center footprint A

B

C

Width D

Tank Height E

Height - overall F

Depth G

H

30 metal 430 x 240 500 ~514 510 ~381 ~523 320 ~394 50 metal 490 x 270 570 586 580 475 ~617 374 ~448

Please notice: FCA (EMEA, LATAM APAC) units include manual fill with strainer only. FCA (NAFTA) units include a blank plate where a quick disconnect must be installed . Quick fill disconnect MUST BE ORDERED SEPARATELY . Please see section 3.3 .

Representative only!! See note below



3.1.3 MFE5-KW3-C100 Please notice: FCA (EMEA, LATAM APAC) units include manual fill with strainer only. FCA (NAFTA) uni ts include a blank plate where a quick disconnect must be installed . Quick fill disconnect MUST BE ORDERED SEPARATELY. Please see section 3.3


1

1

2

2

3

3

4

4

A A

B B

C C

D D

PART#

DRAWING#

DATE

CUST

CHK'D BY

SCALE

OFSHEET

DRAWN BY

SIZE

First Angle

Projection

Gear Pump Unit

DESCRIPTION

REVISION HISTORY

NUMDATENAME

NOTE:

APP'D

Dimensions in mm(unless specified)

T1000109

07/12/201211

C

360

287

239

230

17.5

7

barAC/DC

40VAA 1.0

48V DCS2-Minimum / NC-contact

WA

241.024V AC

S1-Pre-warning / NO-contact

5)

4)

2)1)

1)

1)

5)

3400

0.61/0.35

Voltage range:

0.145-1min

kWAV265/460

/V220-240/380-420 254-280/440-480

Hz6050/

0.122800

0.61/0.35230/400

Circuit:

Rated power:Rated speed:

Rated current:Rated voltage:

Rated frequency:

FInsulation class:Type of operation acc. to VDE0530: S1 / 100%

3

2

4

1BN1

Standard filter NG40 acc. to DIN24550 for reversible oil flow with visual red pin and 1 electr. switching contact at 75% and at 100% of the cracking pressure.

+24V DC

Circuit diagram

mcm²l/min

25

40440

V24

D

connector

15VA / 15W4-pin, M12x1

p=5

NC-contact (100%)NO-contact (75%)

BKBU

WH43

2 100% warning

24P P

Flows to:

Filter rating abs.:Strainer area:

Contakt picture: Filter free

Switching pressure (-10%):Max. switching output:acc.to IEC 60947-5-2:Electrical connectorMax. switching voltage:

Type of indication:

Pin 3: not used75% pre-warning

176-200-009995-901-056169-400-185-V57

Pressure switch:

Filterelement:Repair set:

Spare parts

Differential pressure switch

1 1

Pressure filter

UL/CSA

3Filter rating:

Breather filter

24V AC/DC

NOT USED

PRE-WARNING

> MINIMUM

M12x1

BN1

BUBK

34

M12x1

2 WH

Circuit diagram

Float switch for min lubricant level with pre-warning

Contact scheme: Filled reservoir (maximum)

Elektrical connector:Max. breaking capacity:Max. switching current:Max. operating voltage:

Outputs / type of contact:

In reaching the minimum level contact 1-2 is opening.25mm before the minimum level contact 1-4 closes.Function:

Level switch

l3Reservoir capacity:

Technical data

l/minbarmm²/s

0.6

°C

280.5Output:

Max. back pressure:Operating viscosity:Mineral- or synthetic oil compliant with:

Operating temperature:

Motor

Degree of protection acc. to DIN EN 60529: IP54

plastics, NBR-elastomeres, copper and copper alloys+10 ... +40

20 ... 1000

Standards:

HD 60364-4-41/ DIN VDE 0100-410 / IEC60364-4-41

EN60204-1 / IEC60204-1

"Protective Extra Low Voltage" (PELV)

Applicable protection measures for operation:

8) for cable Ø6...Ø12mm

5)

2)

3)

4)

6)

at a back pressure p=5bar. Output (flow rate), is based on an operating viscosity of 140mm²/s (cSt),

Please specify voltages and frequencies when ordering

For exact power consumption see name plate.

The max back pressure is equivalent to the actual value of the built-in

P=pressure port G1/2

R=return port G1/2 closed7)

ordered separately.Quick coupling complete for reservoirs must be

Order-No.Order-No.

9)

995-001-519995-004-521G3/4

995-001-500995-002-096G1/4

995-001-517995-004-088G1/8

disconnectFemale quick

-A- for reservoirsQuick coupling completeThread

Hydraulic layout

R

P

T1P

S

u

u m

pressure regulating valve.

Revision 1.3

CHRYSLER/FIAT

Lubrication Systems

11.10.2010


Page No.: 33 of 76

3.1.4 MFE5-BW3-C100 Please notice: FCA (EMEA, LATAM APAC) units include manual fill with strainer only. FCA (NAFTA) units include a blank plate where a quick disconnect must be installed . Quick fill disconnect MUST BE ORDERED SEPARATELY. Please see section 3.3 .


m m

D

m

D

m


3.1.5 MFE5-KW3-F100


P= Pressure port G1/2

R= return port G1/2-closed2)

1)

12)

14)

13)

11)

10) Please quote voltage and frequency when ordering. Operating data are only for specified voltage.Name plate is labelled with order no., technical data andreservior capacity.Based on an operating viscosity of 140mm²/s and a backpressure of p=5bar.Applicable protection measures for operation:"Protective Extra Low Voltage" (PELV)Standards:EN60204-1 / IEC60204-1HD 60364-4-41/ DIN VDE 0100-410 / IEC60364-4-41For the exact power consumption please see power plate.Motor data on demand!

Company:specification for lubrication equipment.This component meets the following

Revision:Date:

Specification:Plant:

11.10.2010

Lubrication SystemsCHRYSLER/FIAT

Chrysler-Powertrain-CPT

Hydraulic diagram P1)

Revision 1.3

20 ... 1000

+10 ... +40plastics, NBR/FPM- elastomeres, copper and copper alloys

IP54Degree of protection acc. to DIN EN 60529:

Motor

Operating temperature:

Mineral- or synthetic oil compliant with:Operating viscosity:Max. back pressure:Output: 0.5

28

°C

0.6

mm²/sbarl/min

Technical dataReservoir capacity: 3 l

Level switch

Function:After the level of fluid drops to 25mm above themin. filling level contact 1-4 closes; if the levelof fluid continues to drop to the min. levelcontact 1-2 opens.Outputs / type of contact:Max. operating voltage:Max. switching current:Max. breaking capacity:Elektrical connector:

Contact scheme: Filled reservoir (maximum)

Float switch for min lubricant level with prewarning

13)

Circuit diagram - Level switch

2 NC-contacts18 ... 301,040M12x1

VDCAW

Breather filterFilter rating: 3 m m

UL/CSA

Pressure filter

Differential pressure switch

Spare parts

Repair set:Filterelement:

Pressure switch:

169-400-185-V57995-901-056176-200-009

Type of indication:

Max. switching voltage:Electrical connector

acc.to IEC 60947-5-2:Max. switching output:Switching pressure (-10%):

Contact picture: Filter free

Strainer area:Filter rating abs.:

Flows to:

NO-contact (75%)NC-contact (100%)

p=5

4-pin, M12x115VA / 15W

connector

D

24

AC/DCbar

V

44040

25

l/mincm²m m

Circuit diagram-Pressure Filter

and at 100% of the cracking pressure.with visual red pin and 1 electr. switching contact at 75% Standard filter NG40 acc. to DIN24550 for reversible oil flow

13)

12)11)

S1 / 100%Type of operation acc. to VDE0530:Insulation class: F

Rated frequency:

Rated voltage:Rated current:

Rated speed:Rated power:

Circuit:

230/4000.61/0.35

28000.12

/50 60 Hz

254-280/440-480220-240/380-420 V/

265/460 VAkWmin -1

0.145

Voltage range:

0.61/0.35

3400

10)

10)

14)10)

376

348

277

226

277

1

1

2

2

A A

B B

First Angle

Projection

DESCRIPTION

PART#

DWG#

SHEET OF DATE

NOTE:

DRAWN BY:

CHK'D BY: REVISION HISTORY

NUM.DATENAME

SIZESCALE

CUST

APP'D

N1004389

1 1 4-13-2011

CWagner

NTS A

11

75% pre-warning

Pin 3: not used

PP

4 2

100% warning2

3

4

WH

BU

BK

+24V DC1 BN

1

4

2

3

WH2

M12x1

4

3

BK

BU

1 BN

> MINIMUM

PRE-WARNING

NOT USED

24V AC/DC

Measurements without tolerances are orientative values for information only!


3.1.6 MFE5-BW3-F100


m

D

m


3.1.7 P-886-BWW*-C100

Please notice: FCA (EMEA, LATAM APAC) units include manual fill with strainer only. FCA (NAFTA) units include a blank plate where a quick disconnect must be installed . Quick fill disconnect MUST BE ORDERED SEPARATELY. Please see section 3.3 .


DD

CC

BB

AA

4

4

3

3

2

2

1

1

(unless specified)Dimensions in mm

APP'D

NOTE:

NAMEDATENUM

REVISION HISTORY

DESCRIPTION

Piston Pump Unit

Projection

First Angle

CSIZE

DRAWN BY

SHEET OF1 1

SCALE

CHK'D BY

CUST

11/14/2011DATE

N1004537DRAWING#

PART#

388

345

250

140

300

9 THRU2X

G1/4

Outlet Port: ISO-1179 G1/2"


3.2 Angle Bracket for Filter A ssembl y 881-280-086 881-260-041

Reservoir capacity (liters)

Angle bracket Order No.

3 plastic --- 6 plastic --- 3 metal 881-260-041 6 metal 881-280-086 15 metal 881-280-086 30 metal 881-280-086 50 metal 881-280-086



3.3 Quick Disconnect C oupling


1

1

2

2

3

3

4

4

A A

B B

First Angle

Projection

DESCRIPTION

PART#

DWG#

SHEET OF DATE

NOTE:

DRAWN BY:

CHK'D BY: REVISION HISTORY

NUM.DATENAME

SIZESCALE

CUST

APP'D

M1000813

1 1 12/09/2013

SMoninger

NTS B

Available Filler Couplings

Parker Series FEM Parker Series 60 Parker Series FF

FillerCoupling

Size

Nipple Coupler Nipple Coupler Nipple CouplerParker-single part

(coupling only)SKF-assembly(sieve,housing,

adapter, coupling)

Parker-single part(coupling only)

SKF-assembly(sieve,housing,

adapter, coupling)



adapter, coupling)



adapter, coupling)



adapter, coupling)



adapter, coupling)

1/8 " n.a. n.a. n.a. n.a. H1-63-BSPP 995-003-529 H1-62-BSPP 995-005-088 n.a. n.a. n.a. n.a.

1/4 " n.a. n.a. n.a. n.a. H2-63-BSPP 995-002-096 H2-62-BSPP 995-005-096 n.a. n.a. n.a. n.a.

3/8 " FEM-382-6FB 995-003-534 FEM-371-6FB n.a. H3-63-BSPP 995-003-530 H3-62-BSPP 995-005-097 FF-372-8FB 995-001-228 FF-371-8FB 995-001-227

1/2 " n.a. n.a. n.a. n.a. H4-63-BSPP 995-003-531 H4-62-BSPP 995-003-533 FF-502-8FB 995-003-517 FF-501-8FB 995-003-518

5/8 " FEM-622-12FB 995-003-527 FEM-621-12FB n.a. n.a. n.a. n.a. n.a. n.a. n.a. n.a. n.a.

3/4 " FEM-752-16FB 995-003-528 FEM-751-16FB n.a. H6-63-BSPP 995-003-532 H6-62-BSPP 995-005-521 FF-752-10FB n.a. FF-751-10FB n.a.


3.4 Glycerine Filled Pressure G auges

See Brochure 1-0103-EN




3.5 MFE-Pumps for Piston Distributors for Fluid G rease Technical data Output: 0.2 l/min Maximum back pressure: 38 bar Fluid grease NLGI-class: 00,000 Operating temperature: +10 to +40 °C Degree of protection acc. to DIN EN 60529: IP54 Summary of MFE -Pumps for Piston Distributors for Fluid Grease for FCA (NAFTA) MFE2-KW3F-C100+xxx MFE2-KW6F-C100+xxx

Summary of MFE -Pumps for Piston Distributors for Fluid Frease for FCA (EMEA, LATAM, APAC) MFE2-KW3F-F100+xxx MFE2-KW6F-F100+xxx Please notice: FCA (EMEA, LATAM APAC) units include manual fill with st rainer only. FCA (NAFTA) units include a blank pl ate where a quick disconnect must be installed . Quick fill disconnect MUST BE ORDERED SEPARATELY. Please see section 3.3.



3.5.1 MFE2-KW*F-C100 Please notice: FCA (EMEA, LATAM APAC) units include manual fill with strainer only. FCA (NAFTA) units include a blank plate where a quick disconnect must be installed . Quick fill disconnect MUST BE ORDERED SEPARATELY. Please see section 3.3 .


L


3.5.2 MFE2-KW*F-F100


L


3.6 MF Pumps for Progressive systems for oil Technical data : Technical data units MF1 -BW7-V100+XXX Output: 0.1 l/min Maximum back pressure: 60 bar Operating viscosity: 20 to 1500 mm²/s Mineral or synthetic oil compliant with: plastics, NBR- elastomers, copper and copper alloys Operating temperature: +10 to +40 °C Degree of protection acc. to DIN EN 60529: IP54 Summary of MFE -pumps for progressive systems for oil for FCA (NAFTA ) MF1-BW7-C100+xxx Summary of MFE -pumps for progressive systems for oil for FCA (EMEA, LATAM, APAC) MF1-BW7-F100+xxx

Please notice: FCA (EMEA, LATAM, APAC) units include manual fill with strainer only. FCA (NAFTA) units include a blank plate where a quick disconnect must be install ed. Quick fill disconnect MUST BE ORDERED SEPARATELY. Please see section 3.3 .



3.6.1 MF1-BW*-C100 Return to Table of Contents

MIN


3.6.2 MF1-BW*-F100


MIN


3.7 Compact Greaser ETPxWZ-xxxxx -x+924

See brochure 1-0988-EN




3.8 KFG1-5W2x-V71+924 Piston Pump for Progressive Systems for Fluid Grease

Quick fill/disconnect is shown for representative purposes only. Quick disconnect couplings must be ordered separately. Please see section 3.3.



3.9 KFG1-5W1x-V71+924 Piston Pump for Progressive Systems for G rease




3.10 KFB1-M-W+924



L


3.11 KFA1-M-WA-V71+924 Pumps for Progressive Systems for G rease



L


3.12 Piston Distributor 341 and Manifolds

Single Piston Distributor 341; Metering up to 0.16 ccm See brochure 1-5001-EN

Manifolds for Single Piston Distributor 341 See brochure 1-5001-EN 3.13 Piston Distributor 342,343,345 Series

Metering up to 0.16 ccm See brochure 1-5001-EN



Manifolds for Single Piston Distributor 351 See brochure 1-5001-EN 3.15 Piston Distributor 352,353,355 Series

Metering up to 0.60 ccm See brochure 1-5001-EN



Manifolds for Single Piston Distributor 391 See brochure 1-5001-EN 3.17 Piston Distributor 392, 393 Series ;

Metering up to 1.5 ccm See brochure 1-5001-EN 3.18 Oil + Air Mixing Valves, MV20x -100-xxxxxxxx

See brochure 1-5012-EN 3.19 Progressive Feeder VPG

See brochure 1-3016-EN 3.20 Progressive Feeder VPKG

See brochure 1-3015-EN 3.21 Progressive Feeder VPBG Sizes

See brochure 1-3017-EN 3.22 Modular Feeder PSG2

See brochure 1-3013-EN 3.23 Cycle Switch 177-300-094 for VP and PSG progressive feeders

See brochure 1-0107-6-EN Return to Table of Contents File name: Project_Book_2-2_SKF.pdf Original date: 01-October-2010 Revised Date: 01-January-2016 Page No.: 52 of 76










http://www.skf.com/binary/12-32208/1-5012-3-EN.pdf


http://www.skf.com/binary/12-32771/1-3015-EN.pdf%E2%80%8E




3.24 Cycle Switch 177 -300-095 for VPK progressive feeders

See brochure 1-0107-6-EN

3.25 Cycle Switch 177-300-097 for VPB progressive feeders

See brochure 1-0107-6-EN

3.26 Cycle Switch Connectors for Progressive Feeders

See brochure 1-1730-EN 3.27 Overpressure Indicators for Progressive Feeders

See brochure 1-0107-6-EN 3.28 Pressure Switches









3.29 Ultrasonic Level Switch



3.30 Flow Monitor GS300

See brochure 1-1704-EN 3.31 Oil + Air Streak Sensor GS4011 -S…


3.32 2/2 Way Directional V alve for Oil and Grease - 161-110-031+924

See brochure 1-1703-EN 3.33 3/2 Way Directional Valve for Oil and Grease - 161-120-064+924

See brochure 1-1703-EN 3.34 4/2 Way Directional Valve for Oil - 161-140-050+924




http://www.skf.com/binary/12-32184/1-1704-EN.pdf%E2%80%8E




3.35 Zero Leakage 2/2 Way Valve for Oil - VPG-VEN-V71A+924

160 bar max.24 V DC1.3 A0.03 kWIP64100%

Technical Data:

Pressure:Voltage:Nom inal current :Nom inal power:Protect ion:Duty cycle:Sym bol:


3.36 Zero Leakage 2/2 Way V alve with Union Block - VPG-VEN-V71+924


160 bar max.24 V DC1.3 A0.03 kWI P64100%

Technical Data:

Pressure:Voltage:Nom inal current :Nom inal power:Protect ion:Duty cycle:Sym bol:


3.37 Filter Pressure Filter NG63 acc. to DIN24550


Description Order Number Filter Rating Pressure filter 169-460-099-V57 3 µm Pressure filter 169-460-087-V70 10 µm Pressure filter 169-460-185 25 µm Spare Parts Order Number Filter Rating Filter element 169-400-257 3 µm Filter element 169-400-250 10 µm Filter element 169-400-185-V57 25 µm Repair set seals 995-901-056 Pressure switch 176-200-012

Screen Filter


Description Order Number Filter Rating Screen filter 213-900 25 µm





3.38 Check V alves for Progressive F eeders

See Brochure 1-0107-6-EN 3.39 Lubrilean Vario UFV10-014-2


3.40 Lubrilean VarioPlus UFV10-019-2

See brochure 1-5102-EN 3.41 Lubrilean V arioSuper

See brochure 1-5102-EN 3.42 Lubrilean Digital Super

See brochure 1-5102-EN See brochure 1-5109-EN

3.43 Lubrilean A erosol Monitor AM1000

See brochure 1-5102-EN Return to Table of Contents









3.44 VSR System for Part Lubrication with External C ontrols



3.45 LGPTN Spray Nozzle Assemblies for Oir/A ir Return to Table of Contents


3.46 VTEC-522915, VectoLub Full Modular E xternal MQL system



3.47 AC-3790-C2, VectoLub Spray Block with Nozzle A ssembly


3.48 MOD-032, VectoLub 6 L Plastic Reservoir Assembly





FCA (NAFTA) ONLY COMPONENTS

Section Order Code Description Notes Order Code Qty. Delivery Plant

2.1.1

MFE5-KW3-C100+1FV Gear pump for oil, 3L plastic reservoir

Quick fill sold

separately. See section

3.3.

MFE5-KW6-C100+1FV Gear pump for oil, 6L plastic reservoir

MFE5-KWU3-C100+1FV Gear pump for oil, 3L plastic reservoir


2.1.2

MFE5-BW3-C100+1FV Gear pump for oil, 3L metal reservoir





MFE5-BWU3-C100+1FV Gear pump for oil, 3L metal reservoir





2.1.5

P-886-BWW7-C100 Pneumatic piston pump for oil, 7L metal reservoir

P-886-BWW16-C100 Pneumatic piston pump for oil, 16L metal reservoir

P-886-BWU7-C100 Pneumatic piston pump for oil, 7L metal reservoir

P-886-BWU16-C100 Pneumatic piston pump for oil,16L metal reservoir

2.2.1

MFE2-KW3F-C100+1FV Gear pump for fluid grease, 3L plastic reservoir

MFE2-KW6F-C100+1FV Gear pump for fluid grease, 6L plastic reservoir

MFE2-KWU3F-C100+1FV Gear pump for fluid grease, 3L plastic reservoir

MFE2-KWU6F-C100+1FV Gear pump for fluid grease, 6L plastic reservoir

2.2.3 KFB1-M-W+924 Gear pump for fluid grease, 1.4L plastic reservoir

ORDER FORM PAGE 1 of 13




2.3.1 MFE5-KW3-C100+1FV Gear pump for oil, 3L plastic reservoir

Quick fill sold separately. See

section 3.3.


2.4.1 MF1-BW7-C100+1FV For circulating oil systems, 6L metal reservoir

MF1-BWU7-C100+1FV For circulating oil systems, 6L metal reservoir

2.5.3

KFA1-M-WA-V71+924 Compact unit for grease, Q= 2,0cm³/min

KFA1-M-WB-V71+924 Compact unit for grease, Q= 1,5cm³/min

KFA1-M-WC-V71+924 Compact unit for grease, Q= 1,0cm³/min

2.5.4 ETPxWZ-xxxxx-x+924 Compact greaser, 24VDC See page 46 for

order code key.

FK008-x Grease cartridge for ETP

2.19.1

995-003-534 Quick disconnect 3/8”

Complete quick disconnect with coupler strainer and housing.



2.19.2















2.19.3


Complete quick disconnect with coupler strainer and housing. See section 3.3




2.25.1 VSR-GD-XY VSR system for part lubrication

2.25.2

LGTPN-X-NY-XX-XXX

Spray nozzle assemblies for Oil+Air

LGTCN-X-NY-XX-XXX

LGTFN-X-NY-XX-XXX



FC (EMEA, LATAM, APAC) ONLY COMPONENTS

Section Material Code Description Notes Order Code Qty. Delivery Plant

2.1.3

MFE5-KW3-F100+140 Gear pump for oil, 3L plastic reservoir

MFE5-KW6-F100+140 Gear pump for oil, 6L plastic reservoir

MFE5-KWU3-F100+140 Gear pump for oil, 3L plastic reservoir


2.1.4

MFE5-BW3-F100+140 Gear pump for oil, 3L metal reservoir





MFE5-BWU3-F100+140 Gear pump for oil, 3L metal reservoir







FC (EMEA, LATAM, APAC) ONLY COMPONENTS

Section Material Code Description Notes Order Code Qty. Delivery Plant

2.2.2

MFE2-KW3F-F100+140 Gear pump for fluid grease, 3L plastic reservoir

MFE2-KW6F-F100+140 Gear pump for fluid grease, 6L plastic reservoir

MFE2-KWU3F-F100+140 Gear pump for fluid grease, 3L plastic reservoir

MFE2-KWU6F-F100+140 Gear pump for fluid grease, 6L plastic reservoir

2.3.2 MFE5-KW3-F100+140 Gear pump for oil, 3L plastic

reservoir


2.4.2 MF1-BW7-F100+140

For circulating oil systems, 6L metal reservoir

MF1-BWU7-F100+140 For circulating oil systems, 6L metal reservoir

2.25.3 VTEC-522915

VectoLub full modular external MQL system

VTEC-XXX-XXX-XXX+XXX Application

specific

2.25.4 AC-3790-C2

VectoLub spray block with nozzle assembly

AC-XXXX-C2 Application

specific

2.25.5 MOD-032

VectoLub 6 L plastic reservoir assembly

MOD-032-NC With level

switch



FCA (NAFTA) - FC (EMEA, LATAM, APAC) COMMON COMPONENTS

Section Material Code Description Notes Order Code Qty. Delivery plant

2.5.1

KFG1-5W2A-V71+924 Pump for grease, Q= 2,5cm³/min Quick fill sold separately. See section

3.3.

KFG1-5W2B-V71+924 Pump for grease, Q= 1,8cm³/min

KFG1-5W2C-V71+924 Pump for grease, Q= 1,3cm³/min

KFG1-5W2D-V71+924 Pump for grease, Q= 0,8cm³/min

2.5.2

KFG1-5W1GA-V71+924 Pump for fluid grease, Q= 2,5cm³/min Quick fill sold separately. See section

3.3.

KFG1-5W1GB-V71+924 Pump for fluid grease, Q= 1,8cm³/min

KFG1-5W1GC-V71+924 Pump for fluid grease, Q= 1,3cm³/min

KFG1-5W1GD-V71+924 Pump for fluid grease, Q= 0,8cm³/min

2.6.1

341-1xx-10000-00 Single piston distributor for oil, 0.01cm³

See page 52 for order code

key.

341-100-60000-00 Single piston distributor for oil, 0.02cm³





2.6.1


See page 52 for order code

key.





2.6.1

391-000-40000-00 Single piston distributor for oil, 0.10cm³ See page 52 for order code

key.






FCA (NAFTA)- FC (EMEA, LATAM, APAC) COMMON COMPONENTS


2.6.2

342-4xx-xx000-xx Standard piston distributor for oil, 2 port See page 52 for order code

key.

343-4xx-xxx00-xx Standard piston distributor for oil, 3 port

345-4xx-xxxxx-xx Standard piston distributor for oil, 5 port

2.6.3

352-0xx-xx000-xx Standard piston distributor for oil, 2 port See page 52 for order code

key.

353-0xx-xxx00-xx Standard piston distributor for oil, 3 port

355-0xx-xxxxx-xx Standard piston distributor for oil, 5 port

2.6.4 392-000-xx000-xx Standard piston distributor for oil, 2 port See page 52

for order code key.

393-000-xxx00-xx Standard piston distributor for oil, 3 port






2.7.1

341-7xx-x0000-00 Single piston distributor fluid grease See page 52 for order code key.

351-1xx-x0000-00 Single piston distributor fluid grease See page 52 for order code key.

391-100-x0000-00 Single piston distributor fluid grease See page 52 for order code key.

2.7.2

342-5xx-xx000-xx Standard piston distributor for fluid grease, 2 port See page 52 for order code key.

343-5xx-xxx00-xx Standard piston distributor for fluid grease, 3 port

345-5xx-xxxxx-xx Standard piston distributor for fluid grease, 5 port

2.7.3

352-1xx-xx000-xx Standard piston distributor for fluid grease, 2 port See page 52 for order code key.

353-1xx-xxx00-xx Standard piston distributor for fluid grease, 3 port

355-1xx-xxxxx-xx Standard piston distributor for fluid grease, 5 port

2.7.4 392-100-xx000-xx Standard piston distributor for fluid grease, 2 port See page 52 for

order code key.

393-100-xxx00-xx Standard piston distributor for fluid grease, 3 port

2.8.1

VL-02AAG1 Manifold for single pist.dist. 341; 2-port, G1/8 Manifolds for 341

series

VL-03AAG1 Manifold for single pist.dist. 341; 3-port, G1/8



Manifolds for 341 series



VL-02-AAM1 Manifold for single pist.dist. 341; 2-port, M10x1



VL-02-AAM2 Manifold for single pist.dist. 341; 2-port, M14x1.5







2.8.2

VL-02BAG1 Manifold for single pist.dist. 351; 2-port, G1/8







VL-02-BAM1 Manifold for single pist.dist. 351; 2-port, M10x1



VL-02-BAM2 Manifold for single pist.dist. 351; 2-port, M14x1.5



2.8.3

VL-02CAG1 Manifold for single pist.dist. 391; 2-port, G1/8







VL-02-CAM1 Manifold for single pist.dist. 391; 2-port, M10x1



VL-02-CAM2 Manifold for single pist.dist. 391; 2-port, M14x1.5





FCA (NAFTA)- FC (EMEA, LATAM, APAC) COMMON COMPONENTS


2.9.1

MV201-100-x0000000 Oil+Air mixing valve, 1 port

See page 53 for order code key.

MV202-100-xx000000 Oil+Air mixing valve, 2 port







2.10.1

VPG/03xx/00A1-xxx Feeder, 3 sections (max. 6 outlets)


VPG/04xx/00A1-xxxx Feeder, 4 sections (max. 8 outlets)

VPG/05xx/00A1-xxxxx Feeder, 5 sections (max.10 outlets)

VPG/06xx/00A1-xxxxxx Feeder, 6 sections (max. 12 outlets)

VPG/07xx/00A1-xxxxxxx Feeder, 7 sections (max. 14 outlets)

VPG/08xx/00A1-xxxxxxxx Feeder, 8 sections (max. 16 outlets)

VPG/09xx/00A1-xxxxxxxxx Feeder, 9 sections (max. 18 outlets)

VPG/10xx/00A1-xxxxxxxxxx Feeder, 10 sections (max. 20 outlets)

2.10.2

VPKG/03xx/00A1-xxx Feeder, 3 sections (max. 6 outlets)


VPKG/04xx/00A1-xxxx Feeder, 4 sections (max. 8 outlets)

VPKG/05xx/00A1-xxxxx Feeder, 5 sections (max. 10 outlets)

VPKG/06xx/00A1-xxxxxx Feeder, 6 sections (max. 12 outlets)

VPKG/07xx/00A1-xxxxxxx Feeder, 7 sections (max. 14 outlets)

VPKG/08xx/00A1-xxxxxxxx Feeder, 8 sections (max. 16 outlets)

VPKG/09xx/00A1-xxxxxxxxx Feeder, 9 sections (max. 18 outlets)

VPKG/10xx/00A1-xxxxxxxxxx Feeder, 10 sections (max. 20 outlets)





2.10.3

VPBG/03xx/00A1-xxx Feeder, 3 sections (max. 6 outlets)

See page 53 order code key.

VPBG/04xx/00A1-xxxx Feeder, 4 sections (max. 8 outlets)

VPBG/05xx/00A1-xxxxx Feeder, 5 sections (max. 10 outlets)

VPBG/06xx/00A1-xxxxxx Feeder, 6 sections (max. 12 outlets)

VPBG/07xx/00A1-xxxxxxx Feeder, 7 sections (max. 14 outlets)

VPBG/08xx/00A1-xxxxxxxx Feeder, 8 sections (max. 16 outlets)

VPBG/09xx/00A1-xxxxxxxxx Feeder, 9 sections (max. 18 outlets)

VPBG/10xx/00A1-xxxxxxxxxx Feeder, 10 sections (max.20 outlets)

2.10.4

PSG2/03xx/00A1-xxx Feeder, 3 sections (max. 6 outlets)


PSG2/04xx/00A1-xxxx Feeder, 4 sections (max. 8 outlets)

PSG2/05xx/00A1-xxxxx Feeder, 5 sections (max. 10 outlets)

PSG2/06xx/00A1-xxxxxx Feeder, 6 sections (max. 12 outlets)

PSG2/07xx/00A1-xxxxxxx Feeder, 7 sections (max. 14 outlets)

PSG2/08xx/00A1-xxxxxxxx Feeder, 8 sections (max. 16 outlets)

PSG2/09xx/00A1-xxxxxxxxx Feeder, 9 sections (max. 18 outlets)

PSG2/10xx/00A1-xxxxxxxxxx Feeder, 10 sections (max.20 outlets)

2.11.1

VPG-RV Check valve for VPKG, VPBG; 10 bar, ø 4mm

NOTE: VPG sectional feeders already have

internal check valves at every outlet. However,

VPKG and VPBG do not.

VPG-RV6 Check valve for VPKG, VPBG; 10 bar, ø 6mm

VPG-RV8 Check valve for VPKG, VPBG; 10 bar, ø 10mm






2.11.2 VPKG-RV Check valve for VPKG, VPGB; 3 bar, ø 6mm With sleeve fitting

and compression nut

2.11.3 VPKG-RV-VS Check valve for VPKG, VPGB; 3 bar, ø 6mm Quick connection

2.12.1 177-300-094 Cycle switch for VPG / PSG2

2.12.2 177-300-095 Cycle switch for VPKG

2.12.3 177-300-097 Cycle switch for VPBG

2.12.4 179-990-600 Straight socket connector w/ 5 meters cable

179-660-601 Elbow socket connector w/ 5 meters cable

2.13.1

VPG-UE16-2 Over pressure indicator, 16 bar









2.14.1 DSC3-A100K-3A2B Electronic pressure switch, M12x1, 4-pins

2.15.1 995-800-135 Ultrasonic Level Switch, M12xZ, 4-pins

2.16.1 GS300 Flow monitor for piston distr. system

2.17.1 GS4011-S20 Oil+air streak sensor, 120 - 600 mm³/hr

GS4011-S50 Oil+air streak sensor, 60 - 120 mm³/hr

2.18.1

169-460-099-V57 Pressure filter w/ dirt indicator, 3 µm - Oil

169-460-087-V70 Pressure filter w/ dirt indicator, 10 µm - Oil

169-460-185 Pressure filter w/ dirt indicator, 25 µm - Oil

Return toTable of Contents





2.18.2 213-900 Screen filter for grease, 25 µm

2.20.1

169-104-015 Pressure gauge, 0-40 bar / 0-580 PSI/ 0-4 MPa

169-110-015 Pressure gauge, 0-100 bar/ 0-1450 PSI/ 0-10 MPa

169-125-015 Pressure gauge, 0-250 bar/ 0-3625 PSI/ 0-25 MPa

2.21.1 161-110-031+924 2/2 way valve, oil and grease

2.21.2 VPG-VEN-V71-

A+924 2/2 way Zero Leakage Valve, oil

2.21.3 VPG-VEN-V71+924 2/2 way Zero Leakage Valve, oil With union block for remote mounting

2.21.4 161-120-064+924 3/2 way valve, oil, oil and grease

2.21.5 161-140-050+924 4/2 way valve, oil

2.22.1 UFV10-014-2 Lubrilean Vario

2.22.2 UFV10-019-2 Lubrilean VarioPlus

2.22.3 UFV30-003 Lubrilean VarioSuper

2.23.1 UFD10-020 Lubrilean DigitalSuper 1

2.23.2 UFD20-020 Lubrilean DigitalSuper 2

2.24.1 AM1000 Aerosol Monitor




Component List for SKF Lubrication Systems Products...Component List for SKF Lubrication Systems...

Documents

Transcript of Component List for SKF Lubrication Systems Products...Component List for SKF Lubrication Systems...