Digital Message Announcer DMA-1. Solid State Digital Audio Player Applications: security warning...
-
Upload
liliana-simpson -
Category
Documents
-
view
226 -
download
5
Transcript of Digital Message Announcer DMA-1. Solid State Digital Audio Player Applications: security warning...
Digital Message Announcer Digital Message Announcer DMA-1DMA-1
Solid State Solid State Digital Audio Digital Audio PlayerPlayer
Applications:
• security warning messagessecurity warning messages• voice alarmsvoice alarms• music filesmusic files• commercialscommercials
Application sites:• cinemas cinemas
• theatrestheatres• hotelshotels• railway stationsrailway stations• shopping centresshopping centres• trade showstrade shows• museumsmuseums
DMA-1DMA-1
DMA-1DMA-1
• MP3 Audio player ;• D-class stereo power amplifier 20+20W or
mono (bridged) 40W;• 8 inputs for single, sequential or binary
combination audio messages play.• 1 RS485 serial control port;• Audio mixer to mix an external audio source.
DMA-1 is an high technology device. It houses in a very compact space:
DMA-1DMA-1
DMA-1DMA-1
TotemTotem
IR proximity sensorIR proximity sensor
The audio message invites to select an
option
ExciterExciter
DMA-1DMA-1
TotemTotemReproduced
message
Touch sensorTouch sensorExciterExciter
DMA-1DMA-1
• Very high audio quality.• High storage capacity.• The recorded music/spot quality is
maintained through time.• Hardware reliability: DMA1 has no
mechanical moving parts• Removable memory card enables quick
audio files update.
Plus:
DMA-1DMA-1
• Easy, quick and intuitive audio files management.
• File plays Instantly regardless the audio track store point.
• DMA1 does not requires any specific software to store and manage audio files.
• Free configuration software (GUI).
Plus:
DMA-1DMA-1
DMA-1DMA-1
• Mains voltage 12÷15VAC o 12÷24VDC• 6/8 multi-purpose inputs for single,
sequence playlist or binary combination playing. Activation with programmable state 0 or state 1.
• V-link programmable output.• Preamplified L+R stereo audio input for
external music source, mixable with MP3 audio.
• Preamplified L+R stereo audio output (0dB).• Amplified stereo audio output 20W+20W or
mono 40W with jumper (bridge, 4 ohm.• 1 serial communication port RS485 for
external control systems interfacing .• 1 REMOTE connector for external SD/MMC
and command buttons connection.
Technical Characteristics:
DMA-1DMA-1
• 4 buttons: play, stop, track forward, track backward and output volume setting.
• 1 Red LED: power on.• 1 Green LED: play/standby.• Configuration parameters setting and storing
on the memory card.
Technical Characteristics:
DMA-1DMA-1
• Compact size: 102x102x18 mm.• DIN rail compatible via a proper
accessory.• Memory types: SD and MMC. • Formats: MPEG1 layer 3 (64 to 192
Kbps).• Frequency response: 20 ~ 20.000 Hz
(±3dB).• Signal/noise ratio:> 90dB.• Harmonic distortion:<0,1%.
Technical Characteristics:
DMA-1DMA-1
• PLAYLIST: operation with several playlists which can be activated by logical inputs.
• SLAVE: 8 digital inputs to play up to 255 audio files in binary combination.
• SERIAL RS485: to interface with control systems for direct recalling of any audio file stored in SD/MMC memory
Progammable functions:
DMA-1DMA-1
• Audio announcement sequences cyclically issued, consisting in single files or 8-file blocks, with 60mins. Max of programmed sequences.
• DMA-1 has an audio input to connect external music sources: at the scheduled event the audio input fades out as per programming.
Progammable functions:
Connecting two DMA1s in cascade via the V-link connection and the audio inputs/outputs can recreate the typical operating mode of a commercial radio station.
DMA-1DMA-1
Special functions:
One DMA-1 (A) is programmed to run in playlist mode, to play the music content (PLAYLISTS.TXT).
The other DMA-1 (B) is programmed to run according to a schedule (PALIN.TXT) to play commercials and\or announcements.
A B
V-Link automation example:
DMA-1 (A) goes on standby after the completion of a Music file.
DMA-1 (B) starts to play a commercials according to the timer config.
DMA-1 (A) starts to play the following MP3 music file in the playlist.
Enjoy working with the DMA-1!