Consumables & Tools - satisloh.com · Consumables & Tools. Satisloh - Optical Manufacturing...

Consumables & Tools

Satisloh - Optical Manufacturing Solutions

Dia

mon

d T

ools

Sur

faci

ng

Turning Tips and Holders for VFT GeneratorsTechnical Data

Radius 2 mm, 5 mm and 8 mm PCD* tip for RX-production of CR39 and selected high index lensesRadius 2 mm MCD* tip for all organic lens materials and free-form

Benefits

Short set-up time after tool change due to accurate length, height and radius of the toolEasy exchange of turning tipsResharpening of PCD* tools up to 4 times possible, up to 8 times when using MCD* tools, provided that the tips have not been damagedHigher throughput by increased spiral space utilizing 5 mm PCD* tool (CR39/HI only)Ensure short polishing time on soft tool polishers and on Toro-X machinesIncrease surface smoothness utilizing MCD* tools for lathing polycarbo-nate and selected high index materials

*PCD = polycrystalline diamond - *MCD = mono crystalline diamond

Packing Unit Order No.

VFT-orbitTool holder 1 pc. 92-007-491

Turning tip PCD R 2 mm 1 pc. 92-007-611

Turning tip MCD R 2 mm 1 pc. 92-007-626

Turning tip MCD premium R 2 mm 1 pc. 92-007-625

Turning tip PCD R 8 mm (dia 16 mm) 1 pc. 92-007-241

Twin action diamond R 2mm** 1 pc. 92-008-053

VFT-compact Tool body 1 pc. 92-005-560

Holder for tool body 1 pc. 92-006-331

Turning and engraving holder 1 pc. 92-007-076

Complete holder turning/engraving (w/o tools) 1 pc. 92-007-098

Holder for engraving pin 1 pc. 92-007-077



Turning tip LC R 5 mm PCD 1 pc. 92-006-984



VFT-ultraHolder for 16 mm PCD insert 1 pc. 92-007-240

Single tool reception 6° /CX H=11.7 1 pc. 92-006-499

Single tool reception 6° CC/CX H=12.7 1 pc. 92-006-497

Single tool reception 6° 1 pc. 92-005-547

Single tool reception 6° 14.5 mm 1 pc. 92-006-969

Tool holder for engraving complete (w/o tools) 1 pc. 92-007-099


Turning tip PCD 2 mm 1 pc. 92-007-106



** may cause limited working range

•

•

•

••

•

••

For high speed ready-to-polishturning processes onVFT models.

Turning tipsPCD / MCD

Ophthalmic Consumables

Table of Contents

For more than 90 years we

have provided ophthalmic

laboratories around the word

with precision optical products

and equipment. Our approach

focuses on the integration of

the industry’s finest equipment

matched with process

consumables that ensure

optimum results.

Be assured that each item in

this catalog is designed and

manufactured to maximize the

efficiency and performance of

your lab equipment. Our goal is

to help give you a competitive

edge by optimizing workflow

and improving yields.

When choosing consumable

products, it’s important that the

materials are suitable for the

machine, they bring optimum

results, and the quality is

consistent. Be confident that

our consumable products fulfill

these requirements.

For world-class service

and more information on

our products, contact our

customer service department.

S U R FA C I N G

Lens Protection & Blocking | 1 S - 3 SAuto Tape 3M™ Surface Saver Plus Nucleo Blocking UV Adhesive Blocking Alloy 117°Nucleo BlockBlocking Chuck

Fining Polycarbonate | 4 SP800 Poly One-Step

Fining CR39 / HI Index | 5 SP1200 One-Step

Conventional Polishing | 6 SUltimate White

Base Pad System | 7 S - 8 SLo-Lift Base Pad System

Polishing | 9 SPoly-Pro Polish System

Coolants & Defoamers | 10 S - 12 SLH-205 Coolant PLUSLH-305 Coolant PLUSPoly-LubeLoFoam

Digital Polishing | 13 S - 15 SStandard-FLEX Polishing CapsPremium-FLEX Polishing CapsExtreme-FLEX Polishing Caps

Generating Tools | 16 S - 20 SVFT Milling Wheels / PCD InsertsVFT Turning Tips / HoldersV50/V75 Cutting Wheels / PCD InsertsV100 Cutting Wheels / PCD InsertsVPRO

Job Trays | 21 SJob Trays

csr.usa@satis loh l 800.866.5640

C O AT I N G

AR Consumables | 1 C - 8 CProprietary Evaporants for AR CoatingSatisloh Top CoatsMonitor CrystalsCrucible Liners for Electron Beam EvaporationEvaporation Boats for Thermal SourcesFilaments for Electron Beam and Ion Sources

AR Accessories | 9 C - 10 CConsumables for Ion Guns Consumables for Electron Beam

Dip Coating Materials | 11 CHard Coating Chemicals for Dip Coating

Spin Coating Materials | 12 CCleaners for Spin CoatingLacquer for Spin Coating

F I N I S H I N G

Finish Pads | 1 FConform Advantage Plus Finish PadConform Advantage Finish Pad

Finish Blocking | 2 F - 3 FConform Finish BlockSatisloh Finish Block

Finish Pads | 4 F - 5 FSecur-edge Finish Pad3M™ Finishing PadConform PadsConform Advantage Plus

Finish Lens Protection | 6 F Lens Protective Blue PadAnti Slip Pad

Job Trays | 7 FJob Trays

Cutters / Diamonds | 8 FEdging Tools ES-2 / ES-3 / ES-4Dressing Stones for Diamond Tools

Edger Cutter Blades | 9 F - 11 F7E / 7Ex Dual Polish Assembly7E / 7Ex Multi-Cutter Body Assembly7E / 7Ex High W rap 2 Polish Assembly7E / 7Ex 5° Taper Polish Assembly

Surfacing l csr.usa@satis loh l 800.866.5640 1 S

Technical

• Size: 10 cm x 33 m roll/ 10 cm x 99 m roll• Thickness: 0.15 mm• Color: Transparent blue• Lenses per roll: 325 (approximate) / 950 (approximate)

Benefits

• Easy application and conforms evenly to lens front surface.• No solvents required for removal and doesn’t leave sticky residue.• Proven compatibility with all Satisloh surfacing machinery.• Works well with automated taping systems.

Recommendations

• Apply with Satisloh AutoTaper or manual tape applicator.• After tape is applied, surface must remain moisture and fingerprint free.

Failure to do so increases the possibility of deblocking lenses.• Store between 60-80º F.

Auto Tape

Technical

• Size: 10 cm x 50 m roll• Thickness: 0.20 mm• Lenses per roll: 450 (approximate)

Benefits

• Easy handling.• Consistent adhesive quality.• Two types of adhesive strengths.

Surface Saver Tape Blocking Medium Lens Material

Blue Tape Alloy Mineral & plastic

Clear Tape Wax Plastics

Surface Saver Tape Blocking Medium Lens Material

Auto Tape Alloy Mineral & plastic

Auto Tape XL Alloy Mineral & plastic

Order No. Size Unit

98-003-922 10 cm x 33 m roll

98-004-327 10 cm x 99 m roll

Order No. Product Size Unit

92-006-512 3M 1640 High Bond 10 cm x 50 yd roll

92-000-449 3M 1641 Medium Bond 10 cm x 50 m roll

92-005-488 3M 1663 Clear for Wax 10 cm x 70 yd roll

92-000-509 3M Tape Applicator each

Ordering

Ordering

Applications

Applications

3M™ Surface Saver Plus

Lens

Pro

tect

ion

& B

lock

ing

Provides superb front surface protection for all lens materials. Because of advanced adhesive qualities it works with a full range of alloys.

Protective tapes for all lens materials (see chart).


Blocking Alloy 117°

Low melting surface blocking alloys for all materials.

Benefits

• Short cooling times.• All virgin metals for optimum adhesion on lens materials.• Packaged in easy-to-use 2.2 pound (1 kg) ingots.• Ingots labeled with melting temperature prevents mixing alloys.• Recyclable.

Recommendations• After blocking, a minimum 30-minute cooling period is recommended. • Maintain proper alloy levels for consistent temperature.• Remove slag daily and prior to filling with fresh alloy.

Order No. Product Unit

92-000-442 Alloy 117° F 2.2 lb ingot

Order No. Unit

92-008-221 18 kg bucket

Ordering

Ordering

Block Medium Blocker Temp. Set At

117° F PLA, PRA, Auto Blocker S 122°- 123° F

Blocking Temp. Lens Materials Workstart After

117° F All 30-min. approx.

More time may be needed based on material.

Applications

Nucleo Blocking UV Adhesive

Technical

• State: Paste• Color: Pale yellow • Odor: Characteristic odor• Oxidizing: Non-oxidizing (by EC criteria)• Flash point > 212°F

Benefits

• Biodegradable

Recommendations• Store in cool, well ventilated area. <=113°F and away from direct sunlight.• Keep container tightly closed.• Avoid formation of dust.• Follow local regulations regarding disposal. Environmentally-friendly, light

curable adhesive used in blocking with Satisloh Nucleo Blocks

EXCLUSIVE

PRODUCT

Lens

Pro

tect

ion

& B

lock

ing


Nucleo Block

Machineable plastic block; use in every machine, including AR and edging. Open platform can be used with any brand surfacing equipment. Disposable / reusable.

Technical

• Material: UV-transmit plastic

Benefits

• Fully automated alloy-free blocking• UV curable blocking material• DIfferent block piece curvatures save adhesive• Economical• Recycle

Recommendations

• Use at room temperature• Store in dust-free environment• Clean with warm water to remove adhesive

Order No. Curve Radius Unit

92-008-084 Base 9/ Radius 60 300 / bag

92-008-081 Base 7/ Radius 80 350 / bag

92-008-082 Base 5/ Radius 110 350 / bag

92-008-083 Base 3/ Radius 180 350 / bag

92-008-085 Base 1/ Radius 500 350 / bag

92-008-221 UV Adhesive 18 kg bucket

Ordering

Blocking Chuck

Unique v-groove design holds the lens accurately for alloy and wax blocking.

Technical• Material: Aluminum• Diameter: 43 mm (standard alloy block)• Designs: Standard and Combi style for use with pin style cylinder machines.• Anodized for tracking.

Benefits

• Eliminates pins – reducing machine wear and parts costs.• Accurate – provides even coverage during fining/polishing processes.• V-groove design optimal for robotic handling.• Durable and long lasting construction minimizes chuck damage. • Single chuck style for entire curve range (alloy only).• Combi style can be used with pin style cylinder machines.

Recommendations• Blocks used at room temperature.• Keep blocks free of dried polish and other contaminates.• Do not clean with acidic products.• Replace worn blocks.• Recycle.

Order No. Chuck Style Curve Radius Color Unit

05-005-577 Standard-alloy Fits all Black ea

02-001-136 Combi-alloy Fits all Black ea

05-058-728 Alloy-notched Fits all Black ea

Ordering

EXCLUSIVE

PRODUCT

Lens

Pro

tect

ion

& B

lock

ing


Fin

ing

Pol

ycar

bona

te

Premium one-step fining pad for polycarbonate lenses.

Technical

• Abrasive: P800-graded silicon carbide• Backing: Double-sided silicon coated paper• Adhesive: Woven gummed rubber• Thickness: 0.37 mm• Design: 7 petal / 16 petal• Diameter: 76, 83, and 89 mm• Roll: 1,000 pads

Benefits

• Consistent stock removal on polycarbonate and Trivex.• Paper style backing for consistent and even distribution of abrasive.• Silicon carbide abrasive for consistent smoothing.• Can be used with LO-Lift Base Pad.• Industrial packaging prevents moisture and contamination - extending shelf life.• Single pad fining system reduces errors and costs.

Recommendations

• Always center pad on-center to clean, dry tool for optimal results.• Recommended for one-step fining elliptical error free lenses produced on

newer CNC generators, including the Satisloh V-Series.• Polish pad should be a larger diameter than fining pad. As follows:• Smoothing pad 76 mm / Polishing pad 83 mm.• Smoothing pad 83 mm / Polishing pad 89 mm.

EXCLUSIVE

PRODUCT

Machine Material Pressure Cycle Time Stock Removal

Toro-X Poly 0.20 bar 2:30 0.20 mm

Trivex 0.20 bar 2:30 0.20 mm

CR-39 0.20 bar 1:00 0.30 mm

Mid Index 0.20 bar :50 0.30 mm

Hi Index 0.20 bar 1:00 0.30 mm

Transition 0.20 bar 1:00 0.30 mm

Spectralite 0.20 bar 1:15 0.25-0.30 mm

Pin Style All 14-16 psi 2:30-3:00 0.20 mm

Order No. Size Unit

98-003-901 76 mm/7 petal 1,000/roll

98-003-903 83 mm/7 petal 1,000/roll

98-003-904 89 mm/7petal 1,000/roll

98-004-355 76 mm/16 petal 1,000/roll

Ordering

Applications

For all materials processing. Satisloh recommends using Toro-X-2SL.Satisloh A.C.T. process can offer reduced times. Contact us for more information.

P800 Poly One-Step


Fin

ing

CR

39 /

HI I

ndex

Premium one-step fining pad forall plastic lens materials.

Technical

• Abrasive: P-Graded aluminum oxide• Backing: Double-sided aluminum oxide coated paper• Adhesive: Woven gummed rubber• Thickness: 0.37 mm• Design: 6 & 7 petal• Diameter: 76, 83, and 89 mm• Roll: 1,000 pads

Benefits

• Consistent stock removal on all plastic materials including mid, and Hi Index, Transitions, and Spectralite.• Provides exceptional surface quality with shortest process times.• Pressure sensitive adhesive for easy application and removal.• Can be used as a conventional pad or with the LO-Lift Base Pad.

Recommendations

• Recommended for one-step fining elliptical error free lenses produced on newer CNC generators, including the VFT and Satisloh V-Series.• Always center pad on clean, dry tool for optimal results.• Polish pad should be a larger diameter than fining pad. As follows:• Smoothing pad 76 mm / Polishing pad 83 mm.• Smoothing pad 83 mm / Polishing pad 89 mm.

EXCLUSIVE

PRODUCT

Machine Material Pressure Cycle Time Stock Removal

Toro-X CR-39 0.25 bar 1:30 0.25-0.30 mm

Mid Index 0.25 bar 1:30 0.25 mm

Hi Index 0.25 bar 1:15 0.20 mm

Transition 0.25 bar 1:30 0.25 mm

Spectralite 0.25 bar 1:30 0.25-0.30 mm

Pin Style All 16-18 psi 1:30 0.20 mm

Order No. Size Unit

92-000-355 76 mm/6 petal 1,000/roll

98-004-387 76 mm/7 petal 1,000/roll

92-000-357 83 mm/6 petal 1,000/roll

92-000-359 83mm/7 petal 1,000/roll

92-000-358 83mm/7 petal non-adhesive 1,000/roll

92-000-349 83mm/6 petal 1,000/roll

98-004-356 76 mm/16 petal 1,000/roll

Ordering

Applications

P1200 One-Step


Con

vent

iona

l Pol

ishi

ngUltimate White

Premium polish pad for plastics, polycarbonate, and hi index.

Technical

• Surface Material: Woven-backed; high density floc• Adhesive: Gummed compensated• Design: 7 petal / 16 petal• Thickness: 1.15 mm• Diameter: 76, 83, and 89 mm• Roll: 500 pads

Benefits

• Reduces swirls and increases surface quality on Polycarboante & Trimex.• Outperforms all competitors on all organic materials and hard resin.• Consistent performance from first to last pad.• Can be used with or without LO-Lift Base Pad.• Very little floc loss.• Exclusive product of Satisloh.

Recommendations

• Store in a dry place at 60-75º F.• Polish pads should be a larger diameter than fining pad. As follows:

- Smoothing pad 76 mm / Polishing pad 83 mm - Smoothing pad 83 mm / Polishing pad 89 mm

• With base pad system, tool needs to be free of liquid polish for proper adhesion.

Machine Material Pressure Cycle Time Speed

Toro-X CR-39, Mid, & HI

0.35 bar 6:00 high

Transitions & 0.35 bar 6:00 high

Spectralite

Poly & Trivex 0.35 bar 6:00 high

Pin Style All 16-18 psi 6:00 high

Order No. Size Unit

98-004-508 76 mm / 7 petal 500/roll

98-004-507 83 mm / 7 petal 500/roll

98-004-509 89 mm / 7 petal 500/roll

92-005-402 76 mm / 16 petal 500/roll

Ordering

EXCLUSIVE

PRODUCT

Applications

Satisloh A.C.T. process can offer reduced times. Contact us for more information.


Bas

e P

ad S

yste

mLo-Lift Base Pad System

Non-abrasive, durable base pad with a unique design for easy application and removal of fining and polish pads.* Can be used as an all materials one-step pad,

including CR39, HI, and polycarbonate.

Technical

• Size: 70, 76, 85 mm• Thickness: 0.38 mm• Color: Multiple; see chart• Surface: Latest technology top coat• Adhesive: Rubber-based adhesive• Design: 7 petal

Benefits

• Unique surface design allows superior contact between working pads and base pad even when wet – eliminating the need to dry tool.

• Long life, 500+ uses, lowest cost per lens.• Pad maintains size consistency – eliminating shrinkage.• Multiple colors available for easy lap tool identification.• No chemicals needed for easy removal – adhesive simply loosens in warm

water and pad peels off.• Easy removal from liner.

Recommendations

• Tool preparation for applying new base pad: - Tool must be clean and dry. - Locate base pad on tool center. - Warm tool above room temperature for proper adhesion. - Use pad press to secure.

Recommended fining/polishing pads for Lo-Lift Base Pad System

Fining CR/HI Index


98-004-387 One-Step P1200 76 mm / 7 petal 1,000/roll



Fining Polycarbonate






Polishing


98-004-508 Ultimate White 76 mm / 7 petal 500/roll




EXCLUSIVE

PRODUCT


Bas

e P

ad S

yste

mLo-Lift Base Pad System - continued

Ordering: Base Pad

Order No. Color Size Unit

98-004-309 Blue 70 mm / 7 petal 250/roll



98-004-311 Purple 70 mm / 7 petal 250/roll



98-004-313 Pink 70 mm / 7 petal 250/roll



98-004-315 White 70 mm / 7 petal 250/roll



98-004-317 Green 70 mm / 7 petal 250/roll



98-004-319 Yellow 70 mm / 7 petal 250/roll



98-004-803 Orange 70 mm / 7 petal 250/roll

98-004-801 Orange 76 mm / 7 petal 250/roll

98-004-804 Grey/Silver 70 mm / 7 petal 250/roll

98-004-802 Grey/Silver 76 mm / 7 petal 250/roll


Pol

ishi

ngPoly-Pro Polish System

Specially- formulated polishes for specific processes in today’s labs: Poly-Pro, Poly-Pro PLUS, Poly-Pro All-Format™

Poly-Pro All-Format™

• Exclusively formulated digital polish for use in our Auto-Flex, I-Flex, Duo-Flex, and Toro-Flex polishing units in conjunction with Satisloh VFT Generator Line.

• Formulated from the Poly-Pro polish provides needed results in cut-to-polish systems.

• Provides appropriate removal rate for organics, including demanding materials like Polycarbonate and Trivex.

• Suspension treated to provide consistent results and reduce carry out and easy clean up.

• Technical: - pH: 3.0 - 4.2 - Particle size: 1.2 - 2.2 - Baume: 23 - 25

Poly-Pro• Premium conventional polish for all organic materials provides exceptional

surface quality and a consistent removal rate.• Significantly reduces haze and helps eliminate swirls on polycarbonate.• Unique formulation extends polish life – up to 25% longer than most polishes.• Ideal for AR and hard coating.• Suspension treated and frost resistant.• Technical:

- pH: 3.2 - 3.9 - Particle size: 1.6 - 1.8 - Baume: 25 - 33

Poly-Pro PLUS• Premium conventional polish allows for faster stock removals on all materials• Suspension treated to provide consistent results and reduce carry out

and easy clean up.• New formulation provides for lower cycle times while providing highest

quality on all lens materials.• Technical:

- pH: 3.2 - 4.2 - Particle size: 1.0 - 2.0 - Baume: 23 - 25

• Recommendations - To be used with Satisloh A.C.T. Process - Polish Temp of 60°F ± 2° - Filtered with 150-200 micron Nylon mesh filter

Order No. Size

92-005-541 1 gallon

92-005-542 5 gallon pail

Ordering

Order No. Size

98-004-376 1 gallon


Ordering

Order No. Size

92-007-987 1 gallon


Ordering

EXCLUSIVE

PRODUCT


Coo

lant

s &

Def

oam

ersLH-205 Coolant PLUS

A fully synthetic coolant specifically designed for ophthalmic lens processing. Unlike standard coolants, LH-205 PLUS provides exceptional micro coating of all swarf, including polycarbonate, preventing swarf build-up in both the cutting chamber and coolant system. It provides a superior quality lens finish and extends tool life.

Technical

• Color: Transparent red liquid • pH-Value: 10-10.3• Refractometer Factor: 0.7 organic• Odor: Mild• Specific Gravity: 1.04-1.05

Benefits

• Works in Satisloh/Bazell central systems as well as all conventional coolant systems.

• Prevents swarf build-up utilizing unique micro-coating properties.• Outstanding corrosion protection.• Incorporates defoaming agent for low foaming.• Anti-fungal agents prevent bacterial growth in complete circulation process.• Free-rinsing formulation prevents sticky film build-up on lenses as well

as machine tools.• Low misting and no objectionable odor for a pleasant atmosphere.• Economical – lowest cost per surface.• 100% synthetic.• Not adversely affected by below-freezing temperatures.

Recommendations

• Dilution ratio: with water up to 30:1.• Diluted concentration should read 0.7 on Refractometer for Organics.

(Satisloh Manual Refractometer #98-003-662).• For best results, system must be maintained to correct coolant ratio as

recommended by system manufacturer.• For optimum performance, use with Satisloh Foam Defoamer

(#98-004-010 gal., #98-004-167 5 gal.).• Can be used with wet-cut generators as well as edger systems.

Order No. Unit


98-003-950 55 gallon drum

Ordering

Tank size (gal.) Add this much coolant (gal.)

200 20 13.3 10 8 6.6

175 17.5 11.6 8.75 7 5.8

150 15 10 7.5 6 5

125 12.5 8.3 6.25 5 4.2

100 10 6.6 5 4 3.3

75 7.5 5 3.75 3 2.5

50 5 3.3 2.5 2 1.6

25 2.5 1.6 1.25 1 0.8

Coolant ratio 10 to 1 15 to 1 20 to 1 25 to 1 30 to 1

To charge tank

EXCLUSIVE

PRODUCT


A fully synthetic coolant specifically designed for digital ophthalmic lens processing. This new formulation provides additional chemistry for fine cut processing in digital lens production. C

oola

nts

& D

efoa

mer

sLH-305 Coolant PLUS

Technical

• Color: Yellow / gold• pH-Value: 9.3-10.2• Refractometer Factor: 0.7 organic• Odor: Mild• Specific Gravity: 1.02-1.04

Features

• Based on proven chemistry of LH-205, it provides exceptional lubricity for single point lathing process.• Additional chemistry added allows for smoother cutting and energy release for cleaner optics.• 100% synthetic coolant specially designed for ophthalmic digital lens processing.• Upgraded lo-foam protected.• Outstanding corrosion protection.• Not adversely affected by below-freezing temperatures.

Benefits

• Improved lens cutting technology allows for faster cutting and improved surface quality.• Designed for digital/free form generating.• Improves diamond life.• Prevents swarf build-up.• Improved anti-foaming agents.

Part No. Product Unit

92-006-637 LH-305 PLUS Coolant Plus 5 gallon pail

92-006-883 LH-305 PLUS Coolant Plus 55 gallon drum

98-003-951 Poly-Lube gallon

98-004-010 Lofoam Defoamer gallon

98-004-167 Lofoam Defoamer 5 gallon

98-003-662 Refractometer each

Ordering

Recommendations

• Dilution ratio: with water up to 30:1• Diluted concentration should read 0.7 on refractometer • For best results, system must be maintained to correct coolant ratio as recommended by system manufacturer.

EXCLUSIVE

PRODUCT

Tank size (gal.) Add this much coolant (gal.)

200 20 13.3 10 8 6.6

175 17.5 11.6 8.75 7 5.8

150 15 10 7.5 6 5

125 12.5 8.3 6.25 5 4.2

100 10 6.6 5 4 3.3

75 7.5 5 3.75 3 2.5

50 5 3.3 2.5 2 1.6

25 2.5 1.6 1.25 1 0.8

Coolant ratio 10 to 1 15 to 1 20 to 1 25 to 1 30 to 1

To charge tank


Coo

lant

s &

Def

oam

ersPoly-Lube

Designed to enhance the effectiveness of LH-205 PLUS/ 305 PLUS coolant for optimized lens material swarf removal.

Technical

• Physical form: Liquid• Color: Clear• Odor: Mild• pH: 5.5-6.7• Specific Gravity: 1.018• Freezing point: -25°C

Benefits

• Helps maintain proper function of LH-205 PLUS/305 PLUS coolant.• Small amounts needed to maintain system.• Keeps systems swarf-free.• Enhances effectiveness of swarf pumping systems.• Helps reduce foam.

Recommendations• Application: 20-60 ml per 100 gallons daily.• Daily checks must be performed to keep system in order.

Order No. Unit

98-003-951 1 gallon

Ordering

LoFoam

Use in conjunction with LH-205/305 PLUS to reduce foaming in coolant systems.

Technical

• Physical form: Liquid• Color: White/milky• Odor: Mild• Freezing point: -30oF

Benefits

• Proper chemistry to aid the performance of LH-205 PLUS/305 PLUS.• Can be used as needed to control overflow situations caused by lens materials or contamination.• Helps decrease entrained air bubbles and allows them to break on surface.• Keeps system clean and functioning properly. Recommendations• 2 oz dosage per 8-hour shift

Order No. Unit

98-004-010 1 gallon


Ordering

EXCLUSIVE

PRODUCT

EXCLUSIVE

PRODUCT


Dig

ital P

olis

hingStandard-FLEX Polishing Caps

Best for toric and less demanding full back side digital PAL designs; can be used to produce demanding designs provided process is very tightly controlled.

Technical

• Lifetime: Up to 2,000 to 4,000 seconds.• Polishing pressure: From 0.2 to 0.4 bar.• Work range: Base 0-14 dpt, cyl 0-6 dpt • Flocked velveteen carrier

Benefits

• High shape accuracy for all lens surfaces.• Eliminates hard lap tools.• Short polish times through hard stock removal rates; process times nearly

independent of cylinder and/or add powers. • Highly versatile: polishes all lens formats (toric, spheric, free-form, & concave).

Recommendations

• Please use with recommended polishing compound Poly Pro All Format.


92007088 Standard Flex 0/0 each















92007037 Standard Flex kit 168 pcs


92-008-323 Standard Flex 0/0 CZV each














92-008-337 Standard Flex 14/14 CZV eachOrder No. Product Unit








92008016 Standard Flex starter kit 130 pcs

Standard Flex Caps (I-Flex / Auto Flex)

Standard Flex Caps (Zeiss Process)

Standard Flex Caps (Duo/Toro Flex)

EXCLUSIVE

PRODUCT


Dig

ital P

olis

hingPremium-FLEX Polishing Caps

Best for producing primarily digital designs, including dual side progressive. Consumables utilized are priced higher but breakage is significantly lower and polish pads last up to 50 percent longer.

Technical

• Lifetime: Up to 4,000 to 6,000 seconds• Polishing pressure: From 0.2 to 0.4• Work range: Base 0-14 dpt, cyl 0-6 dpt • Polyurethane based polish carrier

Benefits

• High shape accuracy for all lens surfaces• Eliminates hard lap tools• Cost efficient• Reduces handling, because fewer tools are needed for large working range• Short polish times through high stock removal rates; process times nearly independent of cylinder and/or add powers• Highly versatile: polishes all lens formats (toric, spherical, free-form, & concave)

Recommendations• Please use with recommended polishing compound Poly Pro All Format.


92-009-139 Premium Flex 1/1 each92-009-140 Premium Flex 3/3 each92-009-141 Premium Flex 5/5 each92-009-142 Premium Flex 7/7 each92-009-143 Premium Flex 9/9 each92-009-144 Premium Flex 11/11 each92-009-145 Premium Flex 13/13 each

EXCLUSIVE

PRODUCT

Premium Flex Caps (Duo/Toro Flex)


Dig

ital P

olis

hingExtreme-FLEX Polishing Caps

For two-step polishing process best suited for large diameter lenses with steep curves or high wrap lenses - especially Rx sun lenses.

Technical

• Lifetime: Up to 4500 seconds• Polishing pressure: From 0.2 to 0.5• Work range: Base 0-14 dpt, cyl 0-4 dpt• Polyurethane based polish carrier• Fast reaction foam

Benefits

• High shape accuracy for all lens surfaces• Eliminates hard lap tools• Cost efficient• Reduces handling, because fewer tools are needed for large working range• Short polish times through high stock removal rates; process times nearly independent of cylinder and/or add powers• Highly versatile: polishes all lens formats (toric, spherical, free-form, & concave)

Recommendations• Please use with recommended polishing compound Poly Pro All Format.

FIRST STEP


92-008-515 Extreme Flex 1/1 each92-008-516 Extreme Flex 3/3 each92-008-517 Extreme Flex 5/5 each92-008-518 Extreme Flex 7/7 each92-008-519 Extreme Flex 9/9 each92-008-520 Extreme Flex 11/11 each92-008-521 Extreme Flex 13/13 each92-008-522 Extreme Flex Starter Kit 168 pcs

SECOND STEP


92-008-571 Extreme Flex 1/1 each92-008-572 Extreme Flex 3/3 each92-008-573 Extreme Flex 5/5 each92-008-574 Extreme Flex 7/7 each92-008-575 Extreme Flex 9/9 each92-008-576 Extreme Flex 11/11 each92-008-579 Extreme Flex 13/13 each92-008-577 Extreme Flex Starter Kit 168 pcs

EXCLUSIVE

PRODUCT

Extreme Flex Caps (Duo/Toro Flex)

Extreme Flex Caps (Duo/Toro Flex)


Dia

mon

d T

ools Cutting Wheels and PCD Inserts for VFT Generators

Technical Data

Pre-cuts toric, spherical and free-form organic lensesMaterials: organic lens materials like CR39, HI and polycarbonateThe cutter has 8 polycrystalline bits, each with a diameter of 11 mmBits can be turned 7 timesResharpening of the PCD bits up to 4 times

Benefits

Cutting bits can be exchanged easilyAdjustment of the cutting bits is not necessary due to exact centering by fixing screws (known from Satisloh V-machines)Cuts all organic materialsHigh stock removal rates, high feed ratesReduced deformation in work piece due to low cutting forceExcellent curve accuracy


Cutting wheel T66 L incl. 8 PCD inserts 1 pc. 92-002-738

Cutting wheel T66 L (tool body) without inserts 1 pc. 92-000-915

PCD cutter bits 11 mm 1 pc. 92-000-929

PCD cribbing cutter VFT-compact 1 pc. 92-005-544

VFT engraving pin 1 pc. 92-007-078

Cutting wheel VFT-Orbit without cutter bits 1 pc. 92-007-722

Cutting wheel VFT-Orbit with cutter bits 1 pc. 92-007-724

Holder with mounting screw for PCD-tipped wheel T66

1 pc.92-003-416

Holder for PCD-tipped wheel T66 1 pc. 92-003-464

Mounting screw for PCD-tipped wheel T66 1 pc. 92-003-465

•••••

••

••••

Pre-cutter for high stock removal; processes toric, spherical and free-form organic lenses.

Gen

erat

ing

Tool

sVFT Milling Wheels / PCD Inserts


12 blade fixed PCD Insert

Technical

• Pre-cuts toric, spherical and free-form organic lenses• Materials: organic lens materials like CR39, HI and polycarbonate• The cutter has 8 polycrystalline bits, each with a diameter of 11 mm• Bits can be turned 3 times• Resharpening of the PCD bits up to 3 times

Benefits

• Cutting bits can be exchanged easily• Adjustment of the cutting bits is not necessary due to exact

centering by fixing screws• Cuts all organic materials• High stock removal rates, high feed rates• Reduced deformation in work piece due to low cutting force• Excellent curve accuracy

Order No. Unit

92-002-738 Cutting wheel T66 L incl. 8 PCD inserts

92-000-915 Cutting wheel T66 L (tool body) without inserts

92-000-929 PCD cutter bits 11 mm

92-005-544 PCD cribbing cutter VFT-compact

92-007-078 VFT engraving pin

92-003-416 Holder with mounting screw for PCD-tipped wheel T66

92-003-464 Holder for PCD-tipped wheel T66

92-003-465 Mounting screw for PCD-tipped wheel T66

92-009-346 12 blade PCD complete tool

92-009-118 12 blade PCD disc

92-000-914 Hub for 12 blade PCD disc

Ordering

EXCLUSIVE

PRODUCT

EXCLUSIVE

PRODUCT

06-900-201In-house inspection/repair includes: cleaning, bit exchange, minor repairs

06-900-202Certified inspection for critical damage

Satisloh offers a factory inspection/repair service to maintain the integrity of your tooling hubs.


Dia

mon

d T

ools

Sur

faci

ng



Benefits































•

•

•

••

•

••



Dia

mon

d T

ools

Sur

faci

ng



Benefits































•

•

•

••

•

••



Gen

erat

ing

Tool

sVFT Turning Tips / Holders

For high speed ready-to-polishturning processes on VFT models.

Premium MCD/PCD turning tips.

Technical

• Radius 2 mm, 5 mm and 8 mm PCD tip for RX-production of CR39 and selected high index lenses• Radius 2 mm MCD* tip for all organic lens materials and free-form

Benefits

• Short set-up time after tool change due to accurate length, height and radius of the tool• Easy exchange of turning tips• Resharpening of PCD tools up to 3 times possible, up to 5 times when using MCD tools, provided that the tips have not been damaged• Higher throughput by increased spiral space utilizing 5 mm PCD tool (CR39/HI only)• Ensure short polishing time on soft tool polishers and on Toro-X machines• Increase surface smoothness utilizing MCD* tools for lathing polycarbonate

and selected high index materials

Order No. Unit

VFT-orbit

92-007-491 Tool holder

92-007-611 Turning tip PCD R 2 mm

92-007-626 Turning tip MCD R 2 mm

92-007-625 Turning tip MCD premium R 2 mm (natural)

92-007-241 Turning tip PCD R 8 mm (dia 16 mm)

92-008-053 Twin action diamond R 2 mm

VFT-compact

92-005-560 Tool body

92-006-331 Holder for tool body

92-007-076 Turning and engraving holder

92-007-098 Complete holder turning/engraving (w/o tools)

92-007-077 Holder for engraving pin


92-006-984 Turning tip LC R 5 mm PCD



VFT-ultra

92-007-240 Holder for 16 mm PCD insert

92-006-499 Single tool reception 6° /CX H=11.7

92-006-497 Single tool reception 6° CC/CX H=12.7

92-005-547 Single tool reception 6°

92-006-969 Single tool reception 6° 14.5 mm

92-007-099 Tool holder for engraving complete (w/o tools)


92-007-106 Turning tip PCD 2 mm



Ordering

EXCLUSIVE

PRODUCT

EXCLUSIVE

PRODUCT


Gen

erat

ing

Tool

sV50/V75 Cutting Wheels / PCD Inserts


Order No. Complete Tools

92-002-738 Standard range (to 14.00 D)

92-002-739 Extended range (to 30 D)

Tool Body Only

92-000-915 Standard

92-000-916 Extended

92-000-929 PCD Cutter Bits

Polycrystalline Diamond Cutters



4 carbides + 92-002-739 Extended range (to 30 D)

Tool Body Only

92-000-915 Standard

92-000-916 Extended

Carbide Cutter Bits

92-000-928 Standard

Carbide Lap Cutting




Tool Body Only

92-000-914 Standard

92-000-913 Extended

Cutting Disc Only

92-000-923 Standard (70 mm)

92-000-919 Extended (35 mm)

Glass Cutters




Tool Body Only

92-000-914 Standard

92-000-913 Extended

Cutting Disc Only

92-000-921 Standard (70 mm)

92-000-918 Extended (35 mm)

Plastic Galvanic Cutters





Gen

erat

ing

Tool

sV100 Cutting Wheels / PCD Inserts




Tool Body Only

92-002-077 Standard

92-002-337 Extended





4 carbides + 92-002-337 Extended range (to 30 D)

Tool Body Only

92-002-077 Standard

92-002-337 Extended

Carbide Cutter Bits

92-000-928 Standard

Carbide Lap Cutting




Tool Body Only

92-000-914 Standard

92-000-913 Extended

Cutting Disc Only

92-000-922 Standard (70 mm)

92-000-919 Extended (35 mm)

Glass Cutters




Tool Body Only

92-000-914 Standard

92-000-913 Extended

Cutting Disc Only

92-000-921 Standard (70 mm)

92-000-918 Extended (35 mm)

Plastic Galvanic Cutters






Gen

erat

ing

Tool

sVPRO



92-004-541 Extended range (to 24.0 D)

Tool Body Only

92-003-819 Standard

92-004-262 Extended



Order No. Standard

92-003-821 Tool Body Only

92-000-922 Cutting disc only (70 mm)

Glass Cutters


92-004-163 Standard

92-000-928 Carbide Cutter Bits

Carbide Lap Cutting






Job

Tra

ys

Ordering

Job Trays

Satisloh job trays for surfacingand finishing processes.

Technical

• Satisloh combi tray can be used for both surfacing and finishing• Available in standard colors • Designed for Satisloh automated handling systems

Benefits

• Due to a special locating device, the tray holds Satisloh blocking chucks, blocked lenses ready for the finishing process and lenses that have not yet been blocked.• Also available: Plastic envelope for the job ticket and tray divider

Order No. Product Blocking Style Color Unit

Satisloh Blocking Style

92-004-727 Combi Satisloh White 20 pieces

92-004-730 Combi Satisloh Blue 20 pieces

92-004-731 Combi Satisloh Red 20 pieces

92-004-732 Combi Satisloh Green 20 pieces

92-004-733 Combi Satisloh Yellow 20 pieces

Nidek Blocking Style

92-009-340 Combi Nidek White 20 pieces

92-009-341 Combi Nidek Blue 20 pieces

92-009-342 Combi Nidek Red 20 pieces

92-009-343 Combi Nidek Green 20 pieces

92-009-344 Combi Nidek Yellow 20 pieces

92-009-058 Tray Divider Both Clear 1

92-004-450 Rubber Lens Protector NA Black 1

92-000-763 Job Ticket Cover 220 x 135 mm Plastic 10 pieces

Further colors available on request

EXCLUSIVE

PRODUCT

Coating l csr.usa@satis loh l 800.866.5640 1 C

AR

Con

sum

able

s

Technical

• High purity and consistency

Benefits

• Optimized for Satisloh coating processes and machines• Assures high proven quality and high performance• Process guarantee for Satisloh processes

Recommendations

• Store in a dry place• Keep containers closed

Applications

Satisloh process families for box coaters and bell coaters• IONCOTE carbon• IONCOTE kappa • IONCOTE• MULTIQUARTZ• MULTICOTE• PERFORMANCE• HARDCOTE• SPECTRAFLEX• Customized coatings

Proprietary Evaporants for AR Coating

Guaranteed quality with materialsdesigned for Satisloh processes.

Order No. Product Product Form Specificatication Unit Satis Code

92-005-257 AR-Plus Granules 1-2.5 mm 500 g 9870079R001

92-005-865 G X L Process Liquid liquid 1 pc. 6500691V007

92-006-280 HSA Pills dia 20 x 6.5 mm 2 pc. 9870010Q001

92-005-244 HSAK Granules 1.5-3.5 mm 250 g 9870008S001

92-005-944 MIR Granules <1 mm 250 g 9870067X001

92-005-243 S-1-F Granules 2-4 mm 250 g 9870007D001

92-005-241 S-3-F Granules 1-2.5 mm 250 g 9870005D001

92-005-942 S-4-F Granules 1-4 mm 250 g 9870072T001

92-005-255 S-5-F Granules 1-4 mm 250 g 9870072T002

92-005-239 S-8-G plus Granules 1-3 mm 250 g 9870003C002

92-005-254 S-9-G Granules 1-4 mm 250 g 9870071P001

92-005-252 S-11-P Pills 6 g 250 g 9870068L001

92-005-240 S-15-G Granules 0.1-1 mm 250 g 9870003C003

92-005-262 S-22-P Pills 21 x 6 mm 250 g 9870097A001

92-005-263 S-23-P Pills 21 x 8 mm 250 g 9870097A008

92-005-261 S-26-P Pills 6 g 250 g 9870095S001

92-005-260 SA-1-G Granules 1-3 mm 100 g 9870094W001

92-005-264 SC-1-G Granules 1-4 mm 250 g 9870098X001

Ordering

Proprietary Evaporants for AR CoatingTechnical Data

High purity and consistency

Benefits

Optimized for Satisloh coating processes and machinesAssures high proven quality and high performanceProcess guarantee for Satisloh processes

Recommendations

Store in a dry placeKeep containers closed

Applications

Satisloh process families for box coaters and bell coaters

IONCOTE kappa process family

IONCOTE process family

MULTIQUARTZ process family

MULTICOTE process family

PERFORMANCE process family

HARDCOTE process family

SPECTRAFLEX process family

Customized coatings

•

•••

••

•

•

•

•

•

•

•

•

Eva

por

atio

n M

ater

ials

Guaranteed quality with materialsdesigned for Satisloh processes.

Ordering Information

Satis Code Product Product Form Specifi cation Unit Order No.

9870079R001 AR-Plus granules 1-2.5 mm 500 g 92-005-257

6500691V007 G X L Process liquid liquid 1 pc. 92-005-865

9870010Q001 HSA pills dia 20 x 6.5 mm 2 pc. 92-006-280

9870008S001 HSAK granules 1.5-3.5 mm 250 g 92-005-244

9870067X001 MIR granules <1 mm 250 g 92-005-944

9870007D001 S-1-F granules 2-4 mm 250 g 92-005-243

9870005V001 S-3-F granules 1-2.5 mm 500 g 92-005-241

9870072T001 S-4-F granules 1-4 mm 500 g 92-005-942

9870072T002 S-5-F granules 1-4 mm 500 g 92-005-255

9870003C002 S-8-G plus granules 1-3 mm 250 g 92-005-239

9870071P001 S-9-G granules 1-4 mm 250 g 92-005-254

9870068L001 S-11-P pills 6 g 250 g 92-005-252

9870003C003 S-15-G granules 0.1-1 mm 250 g 92-005-240

9870097A001 S-22-P pills 21 x 6 mm 250 g 92-005-262

9870097A008 S-23-P pills 21 x 8 mm 250 g 92-005-263

9870095S001 S-26-P pills 6 g 250 g 92-005-261

9870094W001 SA-1-G granules 1-3 mm 100 g 92-005-260

9870098X001 SC-1-G granules 1-4 mm 250 g 92-005-264


AR

Con

sum

able

s

Technical

• Satisloh provides simple water repellent hydrophobic products up to latest super easy to clean oleophobic products.• Materials available for application of top coatings in the AR chamber as well as application in a separate chamber

Benefits

• Evaporants for highest super top coat performance• Easy to handle hydrophobic materials• Easy to apply towelettes available• Proven quality

Recommendations

• Keep dry, because materials are moisture sensitive• Keep containers closed• Keep SATIN products refrigerated (-15 to -20°C) for extended shelf life• Consult your Satisloh sales person to find out which hydrophobic or oleophobic product best suits your needs• Satisloh recommends Anti Slip Pad for finishing (see section finishing)

Applications

• Top coats in high vacuum chambers integrated in AR process• Top coats in separate chambers• Wipe on for store applications

Satisloh Top Coats

Provide highest top coatperformance.

Order No. Product Product Form Packing Unit Satis Code

92-005-258 Cleanvac Pills Bottle 100 pcs. 9870087H001

92-007-316 Hydrophobic tablets Pills Bottle 100 pcs.

92-006-296 Aulon Pills Bottle 100 pcs. 9870058K001

92-006-302 Top 8 pills Pills Bottle 5 pcs. 987005K005

92-005-276 Hydrophobic towelette Towelette Individual packets 100 pcs.

92-007-141 Satin 300 Pills Individual packets 10 pcs.

92-006-299 Satin 380 Pills Individual packets 10 pcs. 9870107W001

92-006-301 Satin 1200 Pills Bottle 10 pcs. 9870107W002

92-006-710 Mirage 1 shot Ampoule Bottle 5 pcs.

92-006-711 Mirage 5 shots Ampoule Bottle 5 pcs.

92-007-985 Mirage 380 Pills Individual packets 10 pcs.

92-007-528 Grip II Pills Packet 10 pcs.

92-009-196 Mirage AR Soultion Bottle 50 ml 1 bottle

Ordering Eva

por

atio

n M

ater

ialsSatisloh Top Coats

Technical Data

Satisloh provides simple water repellent hydrophobic products up to latest super easy to clean oleophobic products.Materials available for application of top coatings in the AR chamber as well as application in a separate chamber

Benefits

Evaporants for highest super top coat performanceEasy to handle hydrophobic materialsEasy to apply towelettes availableProven quality

Recommendations

Keep dry, because materials are moisture sensitiveKeep containers closedKeep SATIN products refrigerated (-15 to -20°C) for extended shelf lifeConsult your Satisloh sales person to find out which hydrophobic or oleophobic product best suits your needsSatisloh recommends Anti Slip Pad for finishing (see section finishing)

Applications

Top coats in high vacuum chambers integrated in AR processTop coats in separate chambersWipe on for store applications

•

•

••••

••••

•

•••

Provide highest top coat performance.


Satis Code Product Product Form Packing Unit Order No.

9870087H001 Cleanvac pills bottle 100 pcs. 92-005-258

Hydrophobic tablets pills bottle 100 pcs. 92-007-316

9870058K001 Aulon pills bottle 100 pcs. 92-006-296

987005K005 Top 8 pills pills bottle 5 pcs. 92-006-302

Hydrophobic towelette towelette individual packets 100 pcs. 92-006-261

Satin 300 pills individual packets 10 pcs. 92-007-141

9870107W001 Satin 380 pills individual packets 10 pcs. 92-006-299

9870107W002 Satin 1200 pills bottle 10 pcs. 92-006-301

Mirage 1 shot ampoule bottle 5 pcs. 92-006-710

Mirage 5 shots ampoule bottle 5 pcs. 92-006-711

Mirage 380 pills individual packets 10 pcs. 92-007-985

Others on request.

Co

atin

g

EXCLUSIVE

PRODUCT


AR

Con

sum

able

s

Technical

• Monitor crystals in diameter 13.9 mm

• Available with gold, silver and alloy coating

• Usable in most available coating systems

Benefits

• Proven quality• Provide high precision

Recommendations

• Store in a dry place

Applications

• All AR processes• All quartz monitors

Monitor Crystals

Used for high precision coating thickness control in hot and cold processes.

Order No. ProductNominal Frequency

Diameter Unit Satis Code

92-005-219 Gold, double anchor 5.98 MHz 13.9 mm 10 pcs. 7500448N018

92-005-881 Gold, double anchor, IT 5.98 MHz 13.9 mm 10 pcs. 7500448N018

Ordering

Par

tsMonitor CrystalsTechnical Data

Monitor crystals in diameter 13.9 mmAvailable with gold, silver and alloy coatingUsable in most available coating systems

Benefits

Proven qualityProvide high precision

Recommendations

Store in a dry place

Applications

All AR processesAll quartz monitors

•••

••

•

••


Satis Code Product Nominal Frequency Diameter Unit Order No.

7500448N003 gold, double anchor 6 MHz 13.9 mm 10 pcs. 92-006-283

7500448N003 gold, double anchor, IT 6 MHz 13.9 mm 10 pcs. 92-005-878

7500448N013 gold, single anchor 5 MHz 13.9 mm 10 pcs. 92-006-306

7500448N018 gold, double anchor 5.98 MHz 13.9 mm 10 pcs. 92-005-219

7500448N018 gold, double anchor, IT 5.98 MHz 13.9 mm 10 pcs. 92-005-881

7500448N020 silver, single anchor 5 MHz 13.9 mm 10 pcs. 92-006-027

7500448N022 silver, double anchor 5.98 MHz 13.9 mm 10 pcs. 92-006-025

gold, double anchor 5 MHz 13.9 mm 10 pcs. 92-005-872

alloy, crystal 5.98 MHZ 13,9 mm 10 pcs. 92-007-504

alloy, crystal 5 MHZ 13,9 mm 10 pcs. 92-007-754

Used for high precision coatingthickness control in hot andcold processes.

Co

atin

g


AR

Con

sum

able

s

Technical

• Liners are made of a special refractory material

• Specifically designed liners available for evaporating materials in pill form

Benefits

• Optimum results when utilizing Satisloh coating processes, machines and materials• Proven quality• Process guarantee with Satisloh processes• Long lifetime

Recommendations


Applications

• For Satisloh coating processes using electron beam evaporation systems

• For customized coating processes using electron beam evaporation systems

• Applicable in most of the commercial electron beam evaporation systems

Crucible Liners for Electron Beam Evaporation

Provide optimum coating resultsfor all electron beam guns usedin coating systems.

Crucible Liners for Electron Beam Evaporation

Provide optimum coating resultsfor all electron beam guns usedin Satisloh and most other coating systems.

Technical Data

Liners are made of a special refractory materialSpecifically designed liners available for evaporating materials in pill form

Benefits

Optimum results when utilizing Satisloh coating processes, machines and materialsProven qualityProcess guarantee with Satisloh processesLong lifetime

Recommendations


Applications

For Satisloh coating processes using electron beam evaporation systemsFor customized coating processes using electron beam evaporation systemsApplicable in most of the commercial electron beam evaporation systems

••

•

•••

•

••

•

Par

ts


AR

Con

sum

able

sCrucible Liners for Electron Beam Evaporation

Order No. Product Material Unit Satis Code

92-005-113 Liner vol. = 4 cc Granules 1 pc. 1500295H015




92-005-520 Liner 1 pc. 1500295H022

92-006-152 Liner flat top Pills 1 pc. 1500295H023

92-005-136 Liner vol. = 1.5 cc Pills 1 pc. 1500295H025

92-005-430 Liner vol. = 1.5 cc Granules 1 pc. 1500295H028


92-005-139 Liner CV Granules 10 pc. 1500295H031

92-005-140 Lover, CV Granules 10 pc. 1500295H032






92-005-144 Liner 1 pc. 1500295H043

Ordering


AR

Con

sum

able

sCrucible Liners for Electron Beam Evaporation

Order No. Product Material Unit Satis Code


92-005-147 Liner vol. = 2.1 cc Pills 1 pc. 1500295H046

92-005-148 Liner 3P vol. = 10 cc S3F 1 pc. 1500295H047


92-005-150 Liner vol. = 7 cc Pills 1 pc. 1500295H051


92-006-146 Liner vol. = 7 cc S15G 1 pc. 1500295H057


92-005-585 Liner vol. = 28.5cc Pills 1 pc. 1500295H089



92-006-666 Liner vol. = 8.5 cc S15G 1 pc. 1500295H113

Ordering

15

18

3538

16

8 12

28

9 23

2131

20

23

2931


AR

Con

sum

able

s

Technical

• Liners are made of special refractory metals

Benefits

• Optimized for Satisloh and other coating processes, machines and materials• Proven quality• Process guarantee with Satisloh processes• Long lifetime• Liners are made of special refractory metals

Recommendations


Applications

• For Satisloh coating processes with thermal evaporation• For customized coating processes using thermal sources• Applicable in most of the commercial thermal sources

Evaporation Boats for Thermal Sources

High quality evaporation boatsused for all thermal sources inSatisloh coaters and mostother coaters.

Order No. Product Machine Type Material Unit Satis Code

92-006-298 Boat no. 7 Box coaters, 900, 1200 series Color substances 10 pcs. 1500295H001

92-006-295 Boat CV Box coaters, 900, 1200 series Color substances 10 pcs. 1500295H005

92-006-157 Boat no. 14 Box coaters Color substances 10 pcs. 1500295H009

92-007-627 Boat SA1G Box coaters SA1G 10 pcs. 1500295H153

92-007-628 Boat top coat Box coaters Top coats 10 pcs. 1500295H156

92-006-163 Tantalum boat BCA Box coaters 20 pcs. 1500295H054

92-006-163 Tungsten boat no. 8 Thermal sources HSAK 50 pcs. 1500295H002

Ordering

Evaporation Boats for Thermal Sources

High quality evaporation boatsused for all thermal sources inSatisloh coaters and mostother coaters.

Technical Data

Liners are made of special refractory metals

Benefits

Optimized for Satisloh and other coating processes, machines and materialsProven qualityProcess guarantee with Satisloh processesLong lifetime

Recommendations


Applications

For Satisloh coating processes with thermal evaporationFor customized coating processes using thermal sourcesApplicable in most of the commercial thermal sources

•

•

•••

•

•••

Par

tsMolybdenum Boats

Satis Code Product Machine Type Material Unit Order No.

0300112V001 crucible EV.IN 1 bell coaters with EV.IN 1 system color substances 50 pcs. 92-006-1910300112V002 crucible EV.IN 2 bell coaters with EV.IN 1 system color substances 50 pcs. 92-006-1901500148X001 cover for boat, 3 holes bell coaters color substances 100 pcs. 92-006-2841500172G001 boat no. 2 bell coaters color substances 50 pcs. 92-006-2891500172G006 boat no. 2D bell coaters color substances 50 pcs. 92-006-2821500172G002 boat no. 3 bell coaters color substances 50 pcs. 92-006-2811500172G004 boat no. 5 bell coaters color substances 50 pcs. 92-006-2971500172G005 boat no. 6 bell coaters color substances 50 pcs. 92-006-1631500172G007 boat no. 6D bell coaters color substances 50 pcs. 92-005-1291500172G008 boat no. 6S bell coaters color substances 50 pcs. 92-006-1621500295H001 boat no. 7 box coaters, 900, 1200 series color substances 10 pcs. 92-006-2981500295H004 boat no. 10 bell coaters color substances 10 pcs. 92-006-1591500295H005 boat CV box coaters, 900, 1200 series color substances 10 pcs. 92-006-2951500295H009 boat no. 14 box coaters color substances 10 pcs. 92-006-1571550341N001 boat 150B drum coater 150, thermal source color substances 10 pcs. 92-006-2921500295H153 boat SA1G box coaters SA1G 10 pcs. 92-007-6271500295H156 boat top coat box coaters top coats 10 pcs. 92-007-628

Tantalum Boats


1500169V001 boat AR-4 bell coaters AR substances 10 pcs. 92-006-164

1500170T001 boat AR-4D bell coaters AR substances 10 pcs. 92-006-288

1500171U001 boat ARS bell coaters AR substances 10 pcs. 92-006-286

1500295H054 boat BCA box coaters 20 pcs. 92-006-147

Tungsten Boats


1500295H002 boat no. 8 thermal sources HSAK 50 pcs. 92-006-287


AR

Con

sum

able

s

Benefits

• Proven quality• Process guarantee for Satisloh processes

Recommendations


Applications

• Electron bean guns, ion guns and EV.IN thermal sources for Satisloh coating systems

• Customized coating processes using thermal sources

Filaments for Electron Beam and Ion Sources

High quality filaments for electronbeam guns and ion guns for Satisloh coaters and most other coaters.

Order No. Product Specification System Unit Satis Code

92-006-192 Filament EV.IN EV.IN 50 pcs. 0300111R001

92-007-009 Filament ESV3 E.B.-Gun ESV3 1 pcs. 6500417S0012

92-006-277 Filament S ESV6 E.B.-Gun ESV6 10 pcs. 7500336J0031

92-006-293 Filament Mark II Ion gun Mark II 10 pcs. 7500800Q101

92-007-277 Filament Mark II+ Ion gun Mark II+ 10 pcs. 7500800Q417

92-006-294 Filament Mark I Ion gun Mark I 10 pcs. 7500800Q131

92-007-547 Filament Mark I+ Ion gun Mark I+ 10 pcs. 7500800Q443

92-005-229 Filament + gauge Standard emitter Temescal E.B.-Gun 5 pcs. + 1pc. 7500823P005

92-006-285 Filament TL Standard emitter Temescal E.B.-Gun 5 pcs. 7500823P122

92-005-233 Filament H.P.E. High performance emitter Temescal E.B.-Gun 10 pcs. 7500823P032

92-005-196 View port window Large 158mm x 3mm 1 pc.

92-005-195 View port window Small 1 pc.

Ordering

Par

tsC

oat

ing

Benefits

Proven qualityProcess guarantee for Satisloh processes

Recommendations


Applications

Electron beam guns, ion guns and EV.IN thermal sources for Satisloh coating systemsCustomized coating processes using thermal sources

••

•

•

•

High quality fi laments for electronbeam guns and ion guns forSatisloh coaters and most othercoaters.


Satis Code Product Specifi cation System Unit Order No.

0300111R001 fi lament EV.IN. EV.IN. 50 pcs. 92-006-192

6500417S001 fi lament ESV3 E.B.-Gun ESV3 1 pc. 92-007-009

7500336J003 fi lament S ESV6 E.B.-Gun ESV6 10 pcs. 92-006-277

7500800Q101 fi lament Mark II ion gun Mark II 10 pcs. 92-006-293

7500800Q417 fi lament Mark II+ ion gun Mark II+ 10 pcs. 92-007-277

7500800Q131 fi lament Mark I ion gun Mark I 10 pcs. 92-006-294

7500800Q443 fi lament Mark I+ ion gun Mark I+ 10 pcs. 92-007-547

7500823P005 fi laments + gauge

standard emitter Temescal E.B.-Gun 5 pcs. + 1 pc.

92-005-229

7500823P122 fi lament TL standard emitter Temescal E.B.-Gun 5 pcs. 92-006-2857500823P032 fi lament H.P.E. high performance emitter Temescal E.B.-Gun 10 pcs. 92-005-233

Filaments for Electron Beam and Ion Sources


AR

Acc

esso

ries

Benefits


Recommendations


Applications

• For all processes using ion gun treatment

Consumables for Ion Guns

A large variety of high quality standard and customized con-sumables for ion guns.

Order No. Product Material System Unit Satis Code

92-005-222 Anode Graphite Ion gun Mark 1/ Mark 1+ 1 pc. 7500800Q132

92-005-387 Anode Inox (stainless) Ion gun Mark 1/ Mark 1+ 1 pc. 7500800Q133

92-006-019 Gas distributor Graphite Ion gun Mark 1/ Mark 1+ 1 pc. 7500800Q134

92-006-018 Insulator Sapphire ball Ion gun Mark 1/ Mark 1+ 1 pc. 7500800Q136

92-005-224 Gas distributor, special Graphite Ion gun Mark 1/ Mark 1+ 1 pc. 7500800Q144

92-005-228 Gas distributor, special Inox (stainless) Ion gun Mark 1/ Mark 1+ 1 pc. 7500800Q272

92-006-015 Insulator Ceramic Ion gun Mark I, Mark II 1 pc. 7500800Q167

92-006-017 Gas distributor Inox (stainless) Ion gun Mark II 1 pc. 7500800Q164

92-006-016 Anode Inox (stainless) Ion gun Mark II 1 pc. 7500800Q166

92-005-227 Gas distributor Graphite Ion gun Mark II 1 pc. 7500800Q174

92-006-014 Anode Graphite Ion gun Mark II 1 pc. 7500800Q175

92-006-013 Gas distributor Titanium Ion gun Mark II 1 pc. 7500800Q202

92-007-278 Anode Stainless steel Ion gun Mark II+ 1 pc. 7500800Q437

92-007-292 Gas distributor Graphite Ion gun Mark II+ 1 pc. 7500800Q423

92-007-278 Thermal transfer plate Ion gun Mark II+ 1 pc. 7500800Q427

Ordering

Consumables for Ion GunsBenefits

Proven qualityProcess guarantee for Satisloh processes

Recommendations


Applications

For all processes using ion gun treatment

••

•

•

Acc

esso

ries

Benefi t by Satisloh´s largevariety of high quality standardand customized consumablesfor ion guns.


Satis Code Product Material System Unit Order No.

7500800Q132 anode graphite ion gun Mark I 1 pc. 92-005-222

7500800Q133 anode inox ion gun Mark I 1 pc. 92-005-387

7500800Q134 gas distributor graphite ion gun Mark I 1 pc. 92-006-019

7500800Q136 insulator sapphire ball ion gun Mark I 1 pc. 92-006-018

7500800Q144 gas distributor, special graphite ion gun Mark I 1 pc. 92-005-224

7500800Q272 gas distributor, special inox ion gun Mark I 1 pc. 92-005-2287500800Q167 insulator ceramic ion gun Mark I, Mark II 1 pc. 92-006-015

7500800Q164 gas distributor inox ion gun Mark II 1 pc. 92-006-017

7500800Q166 anode inox ion gun Mark II 1 pc. 92-006-016

7500800Q174 gas distributor graphite ion gun Mark II 1 pc. 92-005-227

7500800Q175 anode graphite ion gun Mark II 1 pc. 92-006-014

7500800Q202 gas distributor titanium ion gun Mark II 1 pc. 92-006-013

7500800Q437 anode stainless steel ion gun Mark II+ 1 pc. 92-007-278

7500800Q423 gas distributor graphite ion gun Mark II+ 1 pc. 92-007-292

7500800Q427 thermal transfer plate ion gun Mark II+ 1 pc. 92-007-278


AR

Acc

esso

ries

Benefits


Recommendations


Applications

• All Satisloh coating systems of 260/360/1200 series; 900 partly

Consumables for Electron Beam

Oil and Grease

Satisloh offers a large variety of high quality standard and customized consumables for electron beam guns.

Satisloh oil and grease are theoptimal choice to maintain thereliability of Satisloh equipment.

Order No. Product Specification System Unit Satis Code

92-005-161 Grease Silicon grease 1 pc. 2000400Z003

92-006-252 Grease Fomblin 1 pc.

92-006-116 Oil for roots pump P3 Roots pumps 5 kg. 2000501U003

92-005-163 Oil for turbo pump TL 011 Turbo pumps 1 pc. 2000501U004

92-005-167 Oil for rotary pump Ultragrade 19 Rotary pumps 4 I 2000503C003

92-005-165 Oil for roots pump Ultragrade 20 Roots pumps 4 I 2000503C002

92-006-113 Oil for rotary pump Ultragrade 70 Roots pumps 4 I 2000503C005

92-007-810 Oil for roughing pumps SP 100/200 Roughing pumps 1 kg 2000501U006

92-005-391 Oil for turbo pump SP 100/200 Turbo pumps 1 pc. 2000501U007

92-009-635 Oil 1 gallon

Ordering

Applications

Ensure performance of your coating system with regularly scheduled change-out of oils and greases.


Dip

Coa

ting

Mat

eria

ls

Technical

• Satisloh provides lacquers for hard coating of lenses with superior performance.• The hard coating lacquers are designed for the application by dip coating.

Benefits

• Highest abrasion resistance• Highest adhesion• One component lacquers (no mixing needed)• Easy to handle• Proven quality• Shelf life 6 month in freezer at -15 to -20°C• Pot life approx. 12 weeks• Satisloh provides lacquers for hard coating of lenses with superior performance.• The hard coating lacquers are designed for the application by dip coating.

Recommendations

• Keep the lacquers refrigerated (-15 to -20°C)• Keep containers closed• Only use Satisloh solvents optimized for Satisloh hard coats• Follow recommendations shown in the technical data sheets

Applications

• Hard coats for CR39, polycarbonate, high index and other lens materials

• Use in Satisloh and other dip coating systems

Hard Coating Chemicals for Dip Coating

Satisloh hard coats combinesuperior performance in conjunction with AR coatings.

Order No. Product Specification System Unit

92-009-121 DN 1601 Hard coat index 1.6 Dip coaters 5 kg

92-007-759 DN 1500 Hard coat index 1.5 Dip coaters 5 kg

92-008-202 DP 200 Primer for hard coat Dip coaters 5 kg

92-007-590 DS 1601 Solvent mix for DN1601 Dip coaters 4 kg

92-007-589 DS 1500 Solvent mix for DN1500 Dip coaters 4 kg

92-007-760 PMGE Solvent general purpose Dip coaters 4 kg

92-007-692 SM-301 Flow modifier Dip coaters 100 g

Ordering


Spi

n C

oatin

g M

ater

ials

Technical

• Satisloh provides lacquers for hard coating of lenses with superior performance.• The hard coating lacquers are designed for application in Satisloh spin coaters.

Benefits

• Highest abrasion resistance• Highest adhesion• One component lacquers (no mixing needed)• Easy to handle• Proven quality• Satisloh provides lacquers for hard coating of lenses with superior performance.• The hard coating lacquers are designed for application in Satisloh spin coaters.

Recommendations

• Store in clean and dry environment at room temperature.• Keep containers closed.• Use only in connection with Satisloh spin coating machines.

Technical

• Pre-coat components for lens prep.• Designed for Satisloh process and spin coat equipment.

Benefits

• Easy to handle• Proven quality• Designed specifically for Satisloh process.

Recommendations

• Store in clean and dry environment at room temperature.• Keep containers closed.• Use only in connection with Satisloh spin coating machines.

Cleaners for Spin Coating

Satisloh hard coats combine superior performance in conjunction with AR coatings.

Lens prep products

Ordering

Ordering

EXCLUSIVE

PRODUCT

EXCLUSIVE

PRODUCT


Solids

92-006-821 GT 100 Tintable G4 / G3 150 ml

92-006- 824 GNT 200 Non tintable G4 / G3 150 ml

Solvents

92-009-622 MS-P501 Tintable lacquer for poly Spin Coater 1 pint bottle

92-009-109 MS-P601 Non tintable lacquer for poly Spin Coater 1 pint bottle

92-008-318 MS-HR853 Non tintable lacquer for CR39, Trivex and high index Spin Coater 1 pint bottle


Lens Prep

92-006-552 PROPASOL Dry agent additive for DI water Spin Coater 8 pk: pints

92-006-675 PM Solvent 8 pk: pints

Lacquer for Spin Coating

Finishing l csr.usa@satis loh l 800.866.5640 1 F

Technical

• Shape/Size: 24 mm round, 18 x 24 mm ½ eye, 19 x 33 mm rugby, 17 x 33 mm small B rugby. • Design: Specially shaped to fit with Conform Finish Blocks

Benefits

• Latest finish pad technology for all lens types - including most coatings.• Unique foam material and adhesive combination provide consistent and

strong conformability to all radii.• Solid design provides greater surface area contact for increased bonding strength of block to lens.• Exclusive adhesive provides long-lasting performance for same-day pre-padding.

Recommendations

• Apply to clean, dry block.• If pre-applying to block, use within one shift.• Storage: 50-80º F and a relative humidity of 40-60%

Conform Advantage Plus Finish Pad

Ordering

Order No. Product Shape/Size Application Unit

92-009-744 Conform Advantage Plus 24 mm round Coated 1,000 / roll

92-009-745 Conform Advantage Plus 18 x 24 half eye Coated 1,000 / roll

92-009-746 Conform Advantage Plus 19 x 33 rugby Coated 1,000 / roll

92-009-747 Conform Advantage Plus 17 x 33 small B rugby Coated 1,000 / roll

Premium pad that provides superior performance on coated lenses.

Fini

sh P

ads

EXCLUSIVE

PRODUCT

Technical

• Shape/Size: 24 mm round, 18 x 24 mm ½ eye, 19 x 33 mm rugby, 17 x 33 mm small B rugby. • Design: Specially shaped to fit with Conform Finish Blocks

Benefits

• A quality finish pad at a competitive price.• Unique foam material and adhesive combination provide consistent and

strong conformability to all radii.• Solid design provides greater surface area contact for increased bonding strength of block to lens.• Exclusive adhesive provides long-lasting performance for same-day pre-padding.

Recommendations

• Apply to clean, dry block.• If pre-applying to block, use within one shift.• Storage: 50-80º F and a relative humidity of 40-60%

Conform Advantage Finish Pad

Ordering

Order No. Product Shape/Size Application Unit

92-009-740 Conform Advantage 24 mm round Uncoated 1,000 / roll

92-009-741 Conform Advantage 18 x 24 mm half eye Uncoated 1,000 / roll

92-009-742 Conform Advantage 19 x 33 rugby Uncoated 1,000 / roll

92-009-743 Conform Advantage 17 x 33 small B rugby Uncoated 1,000 / roll

Competitively priced pad that provides consistent performance on uncoated lenses.

EXCLUSIVE

PRODUCT


Technical

• Material: Special plastic composite• Design: Conformable finish block with True Center Support

Benefits

• True and constant radius eliminates center pocket and “sink” that commonly occurs with other finish blocks.• Unique “rugby” shape and center support system provides more surface contact for exceptional finishing.• Relief ring around block base reduces tearing and cracking in this critical wear area.• Because of its special material composition, Satisloh is able to offer a Recycling Return program that benefits both you and the environment.• Innovative block design combines with new composite material to provide the most durable and long-lasting finish block on the market.• Compatible with any available finishing system.

Recommendations

• Clean with water – air dry.• Use with Satisloh’s Conform Advantage, Conform Advantage Plus, and Secur-edge Finish Pads.• Do not submit to extreme heat.• Replace damaged or worn blocks.• Use with Satisloh Deblocking Pliers.

Conform Finish Block

Ordering

Order No. Product Color Unit

92-008-528 24 mm round Black 25 / bag

92-008-532 24 mm round Blue 25 / bag

92-008-529 18 x 24 mm ½ eye Black 25 / bag

92-008-533 18 x 24 mm ½ eye Blue 25 / bag

92-008-531 19 x 33 mm rugby Black 25 / bag

92-008-535 19 x 33 mm rugby Blue 25 / bag

92-008-530 17 x 33 mm small rugby (ES-4) Black 25 / bag

92-008-534 17 x 33 mm small rugby (ES-4) Blue 25 / bag

75-050-230 Deblocking pliers N/A ea

Specially-engineered True Center Support (patent pending), rather than solid block back, eliminates crazing and increases profitability.

Fini

sh B

lock

ing

EXCLUSIVE

PRODUCT


Technical

• Diameter: Large 25 mm ½ eye 20 mm

Benefits

• Flexible adaptation to the outer radius• Improved lens protection, eliminates possible surface damages during edging

Recommendations

• Clean with water - air dry.• Do not submit to extreme heat.• Replace damaged or worn blocks.

Satisloh Finish Block

Ordering

Order No. Product Color Unit

92-003-938 Satisloh Finish Block, 25 mm, round Blue 25 / bag

92-003-939 Satisloh Finish Block, ½ eye Blue 25 / bag

92-007-368 Satisloh Finish Block Black 25 / bag

92-004-201 Satisloh Finish Block, ½ eye Black 25 / bag

92-004-198 Satisloh Finish Block, large Black 25 / bag

92-007-714 Oval ES rubber clamping ring 16/22 25 / bag

92-007-911 Round ES rubber clamping ring 20 mm 25 / bag

Flexible finish block for use with Satisloh industrial edging systems.

Fin

ish

Blo

ckin

g

EXCLUSIVE

PRODUCT


Technical

• Sizes: round, ½ eye round, rugby, small• Design: specially shaped to fit with Conform Finish Block

Benefits

• Exclusive adhesive provides consistent adhesion to lens and doesn’t leave a residue after use.

• Unique solid design provides greater surface area for increased adhesion.• DIfferent block piece curvatures save adhesive• Reduced slippage• Exclusive shape to fit properly to Satisloh Conform Finish Block• Use with confidence on all lens materials, including AR.

Recommendations

• Apply to clean, dry block.• Use immediately after removing from liner.• Storage: 50-80º F and a relative humidity of 40-60%


92-005-721 24 x 18 mm ½ eye 1,000 / roll

92-005-720 24 mm round 2,000 / roll

92-008-584 17 x 33 mm small rugby (ES-4) 1,000 / roll

92-008-585 19 x 33 mm rugby 2,000 / roll

75-050-230 Deblocking pliers ea

Secur-edge Finish Pad

Fini

sh P

ads

Exclusive design features a solid center rather than the common open center – allowing for larger surface contact.

Ordering

EXCLUSIVE

PRODUCT


Benefits

• Special design for use with Satisloh industrial edgers• Compatible with all lens materials, including AR coatings• Convenient half-eye size eliminates trimming• Easy to remove from lenses• Built-in dispenser

Recommendations

• Apply to clean, dry block• Edge within 2 hours for best performance• Use immediately after removing from liner • Storage: 50-80°F and a relative humidity of 40-60%

Order No. Product Shape / Size Unit

92006514 3M 1701M Leap 3 Square shape 24mm 1000 pads / box

92006515 3M 1700M Leap 3 Square shape 24mm 2000 pads / box

92005539 3M 1696M Leap 3 Oblong shape 18x28mm 1000 pads / box

92005540 3M 1695M Leap 3 Round shape 24mm 2000 pads / box



92006651 3M 1712NR Leap 3 Oblong shape for Nidek 1000 pads / box

92006724 3M 1708 LSE Round for super-hydro 24mm 1000 / roll

92006723 3M 1707 LSE Oval for super-hydro 18mm 1000 / roll

92009645 3M 1712 LSE Nidek style for super hydro 17 x 30mm 500 / roll

92009646 3M 1724 LSE Satisloh small rugby for super-hydro 17 x 30mm 500 / roll

92009647 3M 1725 LSE Satisloh rugby for super-hydro 19 x 30mm 500 / roll

92007856 3M 1697 Leap 3 Special small B size 24 x 18mm 1000 pads / box

Ordering

3M™ Finishing Pad

Fini

sh P

ads

Optimized for use with Satislohindustrial edgers but also compatible with other finishing systems.


Technical

• Shape: round• Diameter: 35 mm

Benefits

• Improved protection of lenses - eliminates surface damages during edging process.

• Improved adhesion - holds lenses safely and stable, eliminates any lens torsion.• Easy peel off after edging, no glue residue remaining.

Recommendations

• Apply on the back of lenses before edging.


92-006-513 3M 1647 Blue Chip Pro 2000 / roll

Ordering

Lens Protective Blue Pad

Fin

ish

Lens

Pro

tect

ion

Protects the lens when edgingand avoids torsion.

Benefits

• High lens protection - avoids surface damages during edging process• Improved adhesion - holds lenses safely and stable, eliminating lens torsion

Recommendations

• Especially used for all super hydrophobic lenses

Ordering

Anti Slip Pad

Provides high lens protection,no torsion, recommended forall super hydrophobic coatings.


92-006-069 Anti slip pad high performance 500 / pack


Ordering

Job Trays

Job

Tra

ys

Satisloh job trays for surfacingand finishing processes.

Technical

• Satisloh combi tray can be used for both surfacing and finishing• Available in standard colors • Designed for Satisloh automated handling systems

Benefits

• Due to a special locating device, the tray holds Satisloh blocking chucks, blocked lenses ready for the finishing process and lenses that have not yet been blocked.• Also available: Plastic envelope for the job ticket and tray divider

Order No. Product Blocking Style Color Unit

Satisloh Blocking Style

92-004-727 Combi Satisloh White 20 pieces

92-004-730 Combi Satisloh Blue 20 pieces

92-004-731 Combi Satisloh Red 20 pieces

92-004-732 Combi Satisloh Green 20 pieces

92-004-733 Combi Satisloh Yellow 20 pieces

Nidek Blocking Style

92-009-340 Combi Nidek White 20 pieces

92-009-341 Combi Nidek Blue 20 pieces

92-009-342 Combi Nidek Red 20 pieces

92-009-343 Combi Nidek Green 20 pieces

92-009-344 Combi Nidek Yellow 20 pieces

92-009-058 Tray Divider Both Clear 1

92-004-450 Rubber Lens Protector NA Black 1

92-000-763 Job Ticket Cover 220 x 135 mm Plastic 10 pieces

Further colors available on request

EXCLUSIVE

PRODUCT


Ordering

Ordering

Edging Tools ES-2 / ES-3 / ES-4

Dressing Stones for Diamond Tools

Cut

ters

/ D

iam

onds

The combi tools provide all featuresof edging process in one tool: beveling, grinding, grooving, pre-polishing as well as fine polishing. The tool is mounted and balanced very precisely in order to achieve the high speed cutting process.

Tool

s Edging Tools ES-2 / ES-3 / ES-4Technical Data

Process all organic material like CR39, high index as well as polycarbonateThe tool segments can be changed easily by the operator.The combi tool is equipped with: PCD cutting ring, sintered pre- and fine polishing tool, PCD beveling lathing tips, sintered beveling rings as well as the carbide tips for grooving.

Benefits

Combine all process steps in one toolProvide long lifetimes

Recommendations

As a separate tool we offer the drill which allows an in-chamber drilling.


ES-4 wheel 57x20 PCD/K20/6 teeth 1 pc. 92-007-753

ES wheel 60x20 PCD/K20/6 teeth 1 pc. 92-004-079

ES-3 grooving bit +6° 0.7 mm poly 1 pc. 92-005-111

ES-3 grooving bit -6° 0.7 mm CR39 1 pc. 92-005-112










ES-3 pin bevel lathing bit PCD +6° 1 pc. 92-005-108

ES-3 pin bevel lathing bit PCD -6° 1 pc. 92-005-658

ES-4 pin bevel lathing tip poly for big tool hub 1 pc. 92-005-108

ES-4 pin bevel lathing tip CR39 for big tool hub 1 pc. 92-005-658

ES-4 pin bevel lathing tip poly for small tool hub 1 pc. 92-007-695

ES-4 pin bevel lathing tip CR39 for small tool hub 1 pc. 92-007-696

ES pin bevel wheel 60 x 3.2 30°/D36/C50 1 pc. 92-004-736

ES pin bevel wheel 60 x 6 30°/D36/C50 1 pc. 92-004-561

ES V-disc-couple D36, C50/D7, C100 1 pc. 92-004-560

ES V-disc-couple D36, C50/D7, C115 1 pc. 92-005-024

ES V-disc-couple D36, C50/D7, C115 115° 1 pc. 92-005-531

ES V-disc-couple D36, D7 1 pc. 92-007-303

ES disc-couple plano D36, C50/D7,C100 1 pc. 92-004-826

Drill bit 0.8 x 6 mm 1 pc. 92-007-752

•

••

••

•The combi tools provide all fea-tures of edging process in one tool: beveling, grinding, grooving, pre-polishing as well as fi ne-polishing. The tool is mounted and balanced very precisely in order to achieve the high speed cutting process.

Tool

s Dressing Stones for Diamond ToolsPacking Unit Order No.

Re-truing stone ES II green 33x18x15 mm for dulling the polish disc 1 pc. 92-004-769

Re-truing stone ES II pink 31x18x15 mm for sharpening the polish disc

1 pc. 92-004-768

Re-truing stone ES II white 35x18x15 mm for sharpening the polish disc

1 pc. 92-004-767

For sharpening and adjusting diamond tools.

Technical

• Process all organic material like CR39, high index as well as polycarbonate• The tool segments can be changed easily by the operator• The combi tool is equipped with: PCD cutting ring, sintered pre- and fine polishing tool, PCD beveling lathing tips, sintered beveling rings as well as the carbide tips for grooving

Benefits

• Combine all process steps in one tool• Provide long lifetimes

Recommendations

• As a separate tool we offer the drill which allows in-chamber drilling


92-007-753 ES-4 wheel 57x20 PCD/K20/6 teeth 1 pc.

92-004-079 ES wheel 60x20 PCD/K20/6 teeth 1 pc.

92-005-111 ES-3 grooving bit +6° 0.7 mm poly 1 pc.

92-005-112 ES-3 grooving bit -6° 0.7 mm CR39 1 pc.










92-005-108 ES-3 pin bevel lathing bit PCD +6° 1 pc.

92-005-658 ES-3 pin bevel lathing bit PCD -6° 1 pc.

92-007-695 ES-4 pin bevel lathing tip poly for small tool hub 1 pc.

92-007-696 ES-4 pin bevel lathing tip CR39 for small tool hub 1 pc.

92-004-736 ES pin bevel wheel 60 x 3.2 30°/D36/C50 1 pc.

92-004-561 ES pin bevel wheel 60 x 6 30°/D36/C50 1 pc.

92-004-560 ES V-disc-couple D36, C50/D7, C100 1 pc.

92-005-024 ES V-disc-couple D36, C50/D7, C115 1 pc.

92-005-531 ES V-disc-couple D36, C50/D7, C115 115° 1 pc.

92-007-303 ES V-disc-couple D36, D7 1 pc.

92-004-826 ES disc-couple plano D36, C50/D7,C100 1 pc.

92-007-752 Drill bit 0.8 x 6 mm 1 pc.


92-004-769Green ES-2/3/4 Dulling stone

1 ea.

92-004-768Pink ES-2/3/4 Sharpening stone

1 ea.

92-004-767White ES-2/3/4 Sharpening stone

1 ea.


Ordering (Blade Options)

Ordering

7E / 7Ex Dual Polish Assembly

Edg

er C

utte

r B

lade

s

High Luster Polish: 02-054-033 (90833)

Standard Polish: 02-054-035 (90825)

Technical

• Number of cuts dependent on material mix

Benefits

• Accepts any 1" blade

Recommendations

• Change blades as needed for maximum cutting quality.

Order No. Product Bevel Unit NOP Code

92-007-868 NBA 30 Deg Cutter w/ Sharp Bevel 30° 1 93194

92-007-869 NBA Cutter with 0.25” Flat 30° 1 93196

92-007-870 Fendall Safe T 115° 1 93195

92-007-871 Liberty 100° 1 93372

92-008-000 Hi-Wrap 1 54°/30° 1 93342

92-007-893 Hi-Wrap 2 44°/40° 1 93344

92-007-892 Shallow Bevel 44°/40° 1 93080

92-007-875 Hilco Sport Goggle w/ sharp bevel 50° 1 93366

92-007-876 Hilco Sport Goggle w/ flat bevel 50° 1 93422

92-008-234 Light Bender NA 2 93275


92-007-884 Carbide Cutter Standard 10 / pk 93072

92-008-052 Coated Cutter Standard 1 93074

92-008-265 Diamond Cutter Standard 1 93075

92-009-313 Micro Edge Cutter Standard 10 / pk NA


Ordering

7E / 7Ex Multi-Cutter Body Assembly

Edg

er C

utte

r B

lade

s

Includes one 1" cutter and choose from three ½" specialty cutters.

Benefits

• One cutter houses 4 blades: one 1" cutter and three ½" specialty cutters.• Avoid changing blades.• Avoid sorting work and need for separate bodies.• Switch between tool hubs in minutes and avoid unnecessary calibrations.

Recommendations

• Change blades as needed for maximum cutting quality.• Ensure blade space is clean before inserting new blade.• Ensure new blade is completely seated down and to the right.


92-007-868 NBA 30 Deg Cutter w/ Sharp Bevel 30° 1 93194

92-007-869 NBA Cutter with 0.25” Flat 30° 1 93196

92-007-870 Fendall Safe T 115° 1 93195

92-007-871 Liberty 100° 1 93372

92-008-000 Hi-Wrap 1 54°/30° 1 93342

92-007-893 Hi-Wrap 2 44°/40° 1 93344

92-007-892 Shallow Bevel 44°/40° 1 93080

92-007-875 Hilco Sport Goggle w/ sharp bevel 50° 1 93366

92-007-876 Hilco Sport Goggle w/ flat bevel 50° 1 93422

92-008-232 Light Bender NA 1 93275

92-007-891 Shelving NA 1 93418

02-504-036 Multi-Cutter Body NA 1 90812


Ordering

Ordering

7E / 7Ex High Wrap 2 Polish Assembly

7E / 7Ex Shallow Polish Assembly

Edg

er C

utte

r B

lade

s

Three-axis high-wrap edging.

Polishes bevel geometry.

Benefits

• With unique bevel geometry, greatly improve 3-axis high wrap edging.• Ability to polish bevel geometry.• Avoid changing blades.• Switch between tool hubs in minutes and avoid unnecessary calibrations.

Recommendations


Benefits

• With thin eyeware frames, utilize shallow beveling to hide excess bevel height.• Ability to polish bevel geometry.• Avoid changing blades.• Switch between tool hubs in minutes and avoid unnecessary calibrations.

Recommendations



92-007-893 Hi-Wrap 2 Blade 44°/40° 1 93344

02-054-038 Hi-Wrap 2 Polish Assembly NA 1 90827


92-007-892 Standard Cutter 44°/40° 1 93080

02-054-037 Shallow Polish Assembly NA 1 90831


Ordering

Ordering

7E / 7Ex 5° Taper Polish Assembly

7E / 7Ex End Mill Assembly

Edg

er C

utte

r B

lade

s

Able to hide excess material on thick lenses.

Ability to cut unique shapes that large diameter wheel edgers cannot.

Benefits

• Commonly referred to as Hide-A-Beveling.• The 5° flat tapered area helps to hide excess material on thick lenses.• Ability to polish bevel geometry.• Avoid changing blades.• Switch between tool hubs in minutes and avoid unnecessary calibrations.

Recommendations


Benefits

• Avoid changing blades.• Switch between tool hubs in minutes and avoid unnecessary calibrations.

Recommendations



92-007-894 Bevel and Taper Blade 115°/5° Taper 1 93435

02-054-039 5° Taper Polish Polish Assembly NA 1 90832


92-007-884 Carbide Cutter Standard 10 / pk 93072

92-008-052 Coated Cutter Standard 1 93074

92-008-265 Diamond Cutter Standard 1 93075

92-007-895 End Mill 3/32 (1.2 mm radius) 93751

92-007-896 End Mill 1/16 (0.8 mm radius) 93745

92-007-897 End Mill 1 mm (0.5 mm radius) 93756

92-008-298 Square Blade Bevel 93348

02-054-040 End Mill Assembly 90811

Consumables & Tools - satisloh.com · Consumables & Tools. Satisloh - Optical Manufacturing...

Documents

Transcript of Consumables & Tools - satisloh.com · Consumables & Tools. Satisloh - Optical Manufacturing...