Command Access Technologies- Oct 2014

8/9/2019 Command Access Technologies- Oct 2014

1/48

www.CommandAccess.com | Phone: 1-888-622-2377 Fax: 1-888-622-2302

Published: October 1, 2014Page 1

Command Access is not a licensee or affiliated, associated or connected with Assa Abloy, Dorma, Ingersoll Rand, Stanley Security, Adams Rite, Arrow, Corbin Russwin, Mckinney, Pemko, Rixson, Sar

gent, Yale, Dor-O-matic, Falcon, Ives, Monarch, Schlage, Von Duprin, Best, Precision, Accurate, AHT, Baldwin, Bommer, Cal Royal, CR Laurence, Design Hardware, Emtek, First Choice, FSB, GeneralLock, Hager, Jackson, Keedex, Lawrence, LSDA, Marks, Marshal-Best, Molex, Omnia, PBB, PDQ, Ramco, TA West, Trans Atlantic or any of their subsidiaries or affiliates.

CONTENTS

Price List 41

TERMS & CONDITIONS

SECTION

ELECTRIFIED MORTISE LOCKS

ELECTRIFIED EXIT TRIM

ELECTRIFIED CYLINDRICAL LOCKS

ARCHITECTURAL & STOREFRONT EXIT DEVICES & KITS

POWER SUPPLIES

POWER ACCESSORIES

POWER TRANSFER HINGE MODIFICATIONS

DOOR LOOPS

QUICK HINGE CROSS REFERENCE SHEET

POWER TRANSFER HINGES/PIVOTS

2

PAGE

4

18

12

26

35

34

42

45

46

36


2/48





PRICES: All LISTs are subject to change without prior notice and are not guaranteed. All prices are per unit (each) unless otherwise specified and

do not include sales or local taxes. All shipments will be made at prices prevailing at time of shipment.

EXPEDITE FEE: An additional $25 minimum or 25% of the order will be charged for expediting any order to ship prior to our standard lead time.Expedite lead times are subject to availability and must be approved by the production manager. Please call for approval.

PAYMENT TERMS: The standard credit terms of Command Access Technologies (herein called CAT) are 2% 10 days net 30. Net 30 means thecheck shall be receive at CAT on or before 30 days from the date of the invoice. Interest will be charged at the rate of 2% per month on past due

accounts.

ACCEPTANCE OF ORDERS AND/OR QUOTATIONS: Possession of prices from CAT does not commit CAT to accept any order. CAT reserves the

right to refuse any order and will not be bound to fill any order until it has been accepted by a representative of CAT and confirmed by a writtenacknowledgement. Quotations are valid for sixty (60) days following the date of the quotation.

OPEN ACCOUNT STATUS: CAT reserves the right to decline or discontinue direct sales to any customer who does not meet an annual minimum

sales requirement of 2,500.00 in invoiced purchases.

ACKNOWLEDGEMENTS: An acknowledgement is an exact copy of a customer’s order as entered by CAT and should be verified by the customer.

If the acknowledgement does not agree with said customers understanding CAT should be advised within (3) three days or the order will bebilled as acknowledged. CAT’s sales terms shall apply irrespective of any special stipulation appearing in customer order, unless specifically

acknowledged and accepted by CAT.

RETURNED GOODS: The customer must advise customer service at CAT of merchandise to be returned and a Returned Goods Authorization

(RGA) will be issued. CAT will not accept goods returned without an RGA. Full credit against further purchases or a replacement will be made atthe option of CAT if upon investigation reveals that goods were shipped in error or if goods are defective in workmanship or material. Otherwise,

a restocking fee of not less than (25) twenty-five percent or $25.00 net (whichever is greater) will be charged. All merchandise must be PREPAIDAND PROPERLY PACKED. All C.O.D. orders shipped to CAT will be refused. Returned goods must be packed in their original boxes. If product has

been installed it cannot be returned. No credit will be given for product not in its original form unless, upon CAT’s inspection, product is found to

be defective. If product is returned as defective and is found to be operational, product will be returned to customer (C.O.D.) and no credit will beissued.

MINIMUM CHARGE: No order will be invoiced for less than $45.00 net plus shipping charges.

CHANGES OR CANCELLATIONS: When a special order is accepted and entered, no change can be made and the order is non cancelable.

Cancellation for items already packed for shipment will be removed if possible. A twenty-five percent (25%) restocking fee will apply.

CLAIMS OR SHORTAGES: Every possible care is taken in the final examination of packing of goods, and no complaints will be accepted unless

made promptly upon receipt of goods. No claim will be allowed for work done by others, consequential damages or other expenditure, andCAT’s understanding to repair or replace defective goods is its only liability. No claim for damage shortage or loss in transit will be accepted

unless notice is given in writing to the carrier and to CAT within (10) ten days of receipt of goods.

BACK CHARGES: CAT is not responsible for, does not authorize, and will not accept any charges for the cost of labor or material incurred by

anyone other than CAT for any installation, repair, service, or replacement unless incurred with CAT’s prior written consent and agreement.

FREIGHT CHARGES: All goods are invoiced F.O.B. CAT, Yorba Linda, California. Freight charges are prepaid and are added to invoice. Consignee

pays C.O.D. freight charges when delivered to the Freight Company the shipment becomes the property of the purchaser, who assumes therisk of loss or damage in transit. If invoice exceeds $1,000.00 net, full service freight by U.P.S. or truck within the continental U.S.A. is deductible,

provided invoice is paid within set terms. Not all products qualify for freight deduction. Airfreight and other special shipments are notdeductible.

PRODUCT CHANGES OR CANCELLATIONS: CAT reserves the right to modify or discontinue any price, product, design, function and finish

without prior notice. PRODUCT FINISHES: Although CAT modifies products with the finest protective coatings, they do have their limitations. In

time, they might deteriorate from extremes in climate, frequency of use, perspiration, or other factors. CAT does not consider excessive wear ortarnishing of the finish as a result of any of the above conditions as a defect. It is considered a normal process, which cannot be avoided. Thus,

CAT cannot guarantee product finishes and will not repair or replace finishes under this warranty.

Terms and Conditions


3/48





LIMITED WARRANTY: Command Access Technologies warrants that its products are free from defects

in workmanship and material under normal use and service. Since CAT does not control productusage, CAT makes no representation as to the degree of security conveyed by the use of any product.

This warranty does not cover defects or damage which occur from improper maintenance, improperstorage, improper installation, shipping and handling, ordinary wear and tear, misuse, abuse, accidents,

unauthorized service, work done by others or consequential damages. CAT will not pay for the cost

of repair performed other than in accordance with this warranty. CAT can only perform authorizedwarranty work at the factory. CAT’s only liability, in tort or contract, whether under this warranty or

otherwise, is limited to providing repair or replacement of any product or component part which isproven to be defective as covered by the warranty, within three (3) years after delivery from CAT to the

original purchaser. Written notice of a product or component part believed to be defective, as covered

by this warranty, should be sent to Command Access Technologies 22901 La Palma Avenue, Yorba LindaCA 92887. Include Claimant’s name, address, phone, and identification of the product, invoice number

and date, and a brief description of the defect. Upon receipt of such notice, a CAT representative willcontact claimants to where to ship such product or component part, with shipping charges prepaid,

for examination and, in the event such examination reveals a defect covered by this warranty, the

product will be repaired or replaced. This warranty is in lieu of all other express warranties. To the extentpermitted by law, all implied warranties are limited to the duration or this warranty. CAT shall not be

liable for any incident or consequential damages. Some states do not allow limitations on how longan implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so

the above may not apply to you. This warranty gives you specific legal rights, and you may have otherrights, which vary, from state to state.

INNOVATIVE SOLUTIONS: We are committed to finding better, more cost effective ways to furnish the

electrified opening. Our commitment to our in-house R&D department supports our goal to provideour customers with the right solution at the right price and the right time.

HUGE INVENTORY: We maintain a large inventory of “ready to be modified” Command Access brand,

IR, Assa Abloy, Stanley/Best and other manufacturer’s products. Additionally, we probably have a widervariety of hinges than anyone in North America. In fact, we labelled ourselves “the distributor to the

distributor”. We often supply locksmith distributors complete locks that cover brands, sizes, and/orfinishes that they typically do not, or cannot stock.


4/48





M O

R T I S

E L O C

K S E T S ELECTRIFIED MORTISE LOCKSETS

Command Access electrified mortise locks allow for remote keyless access

and egress control for heavy use applications where security and safety is

critical. Our aesthetically pleasing modifications conceal all parts within thelocksets, resulting in electrified locks that are indistinguishable from standard

mechanical ones. These locks are available in a variety of makes, models, and

finishes. Additionally, we offer multiple functions and voltages to meet your

requirements. Some common applications include stairwell doors, lobby

entrances, computer rooms, classrooms, interior and exterior doors. Mortise

locks may be purchased as complete locks, chassis only or modifications only

(of customer’s locks). If you don’t see the brand you need listed, please contact

us.

Storeroom – Latchbolt retracted by key outside or lever inside.

Switched power allows outside lever to retract latchbolt. Inside

lever is always free for immediate egress.

Institutional – Latchbolt retracted by key on either side.

Switched power allows both levers to retract latchbolt.

Classroom – Latchbolt retracted by key outside or lever inside.

Switched power allows outside lever to retract latchbolt.

Outside lever can be maintained unlocked by key. Inside lever

is always free for immediate egress.

Entry w/deadbolt – Latchbolt and deadbolt retracted by key

outside or lever inside. Switched power allows outside lever

to retract latchbolt and deadbolt. Inside lever is always free for

immediate egress.

Privacy w/deadbolt - Latchbolt and deadbolt retracted by

key outside or lever inside. Switched power allows outside

lever to retract latchbolt unless deadbolt is thrown. Inside

lever is always free for immediate egress. Available in EU

(electronically unlocked) function only.

REXKIT-ML - Field Installable (Request to Exit or AE switch)

for Schlage L9000 (SCHREXKIT-ML) and Command Access

ML1 (CATREXKIT-ML) series mortise locks) - sends a signal to

alert the control panel that the door is about to be opened by

someone intending to exit from within the secured area

REX - Request to Exit or AE switch available (depending onmanufacturer) - sends a signal to alert the control panel that

the door is about to be opened by someone intending to exit

from within the secured area

LBM - Latchbolt Monitor switch available (depending on

manufacturer) - sends a signal to the control panel to monitor

the position of the latchbolt.

DPS - Door Position switch available (depending on


the position of the door.

DBM - Deadbolt Monitor switch available (depending on


the position of the deadbolt.

SLM - Solenoid Monitor switch available (depending on


the position of the solenoid.

SCM - Security Monitor switch available (depending on

manufacturer) – uses a combination of switches to send a

signal to the control panel to monitor the position of the door

and the solenoid.

A variety of monitoring switches are available for Command Access modified mortise lockset. All switches are SPDT (single pull,

double throw) and either mechanical or reed type. Since each manufacturer has different configurations and designs, all switches

are Not Applicable on all locks. Please refer to the dedicated specification page for your desired mortise lock model, or consult

the factory for switch application verification. With the exception of a few field installable REX kits, all other switches are must be

installed at the factory. Here is a list of available switches and their definition.

FUNCTIONS

MORTISE LOCK SWITCH OPTIONS


5/48





H O W

T O O R D E

RELECTRIFIED MORTISE LOCKSETS

PREFIX

PREFIX

OPTIONS ACC.

ACC.OPTIONS

KEYWAY

KEYWAY

TRIM

TRIM

MODEL + FUNCTION

MODEL + FUNCTION

VOLTAGE

VOLTAGE

FINISH

FINISH

MODIFICATION ONLY

EXAMPLES

COMPLETE LOCK

MD

-

ML80EL

ML1485EU

-

L3

12

12

-

626

-

S

REX CRU2i

-DBM

160

500

-

-

-

-

-

-

-

-

75 40

-

+

+

+

+

75

-

-

PART NUMBER

PART NUMBER

LIST

LIST

MD-ML80EL-12

ML1485EU-12-L3-626-S

$160

$500

FOR COMPLETE LOCKS ONLY

MODEL + FUNCTION

PREFIX or SUFFIX

VOLTAGE

OPTIONAL SWITCHES

i-OPTION FOR MORTISE LOCK

TRIM

FINISH (BHMA std)

KEYWAY

ACCESSORIES

Select a model number and add

EL (Fail Safe) - Electronically Locked

EU (Fail Secure) - Electronically Unlocked

MD - Modification - Prefix

CH - Chassis Only - Suffix

12 or 24 Volts must be specified

REX – Request-to-Exit

DPS – Door Position SwitchLBM – Latchbolt Monitor

DBM – Deadbolt Monitor

SLM – Solenoid MonitorSCM – Security Monitor

For Command Access model #s only. Package includes:

• Intelligent auto voltage sensing 12-30 VDC

• Current reduction technology built-in• REX switch included

– Tubular

– Bent

– Straight

– Curved

605 – Polished Bronze606 – Satin Brass

612 – Satin Bronze613 – Oil Rubbed Bronze

625 – Polished Chrome626 – Satin Chrome

630 – Satin Stainless Steel

S – StandardLC – Less Cylinder

SFIC – Small Format I/CLFIC – Factory Large Format I/C

Faceplates – Storeroom function in specified finishes

Strikes – 4-7/8” ASA Strike in specified finishesCRU2 – Current Reduction Unit (new improved circuitry)CRU2i – Current Reduction Unit (Intelligent CRU2 w/ auto-voltage

sensing from 12 - 30VDC) now non-polarized, use with12V solenoids only.

4 Lead – 4’ Wire Lead w/ connector(s)QC – Molex Connectors

REXKIT-ML – Field installable REX (Request-to-Exit) switch kit

Elements of a Part Number

Additional Options

FOR MODIFICATION, CHASSIS ONLY AND COMPLETE LOCKS

PREFIX OPTIONS ACC.KEYWAY SUFFIXMODEL + FUNCTION VOLTAGE FINISH

CHASSIS ONLY

- ML180EU CH24 - - REX -

250 -- - - 75 -+

+

-

PART NUMBER

LIST

ML180-EU-CH-24

$250


6/48

For Complete Locks Only

S t o r

e r o o

m

P r i v

a c y

w / d

e a d b o l t (

E U o n l y

)

D e a d

b o l t

M o n i t o

r ( D B

M )

6 2 5

L C 6 0 5

L F I C

( l e s

s c o r

e )

I n s t i t u

t i o n

D o o r

P o s i t i

o n ( D

P S )

6 2 6

C l a s

s r o o

m

R e q u

e s t -

t o - E x i t

( R E X

)

E n t r a

n c e

w / d e a d

b o l t

L a t c

h b o l t M

o n i t o r

( L B M

)

6 1 3

S 6 3 0

S F I C

( l e s

s c o r

e )

Electrified Functions Optional SwitchesIn-stock Trim In-stock Finishes Keyway

- = Not Applicable

= Available





ELECTRIFIED MORTISE LOCKSETS

ML59EL

ML77EL

ML59EU

ML77EU

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

75

75

-

-

75

-

-

75

-

-

-

-

180

180

-

-

-

-

-

-

- -

-

-

---

FAIL SAFE (EL)

FAIL SAFE (EL)

FAIL SECURE (EU)

FAIL SECURE (EU)

MODIFICATION ONLY (Customer’s Accurate 9145 Chassis)Specify Voltage and Handing.

MODIFICATION ONLY (Customer’s Arrow AM17 or BM17 Chassis)Specify Voltage and Handing.

MODIFICATION

add prefix (MD)

MODIFICATION

add prefix (MD)

ML35DEL

ML35DEU

ML35WEL

ML35WEU

-

-

-

-

-

-

180 200- - -

FAIL SAFE (EL)

FAIL SECURE (EU)

MODIFICATION ONLY (Customer’s Best 35HEW Chassis)Specify Voltage and Handing. Faceplates & Strikes available in 626 (see page 11 for pricing)

MODIFICATION

add prefix (MD)

ACCURATE

ARROW

BEST 35

-

-

75 75 75

CHASSIS ONLY


7/48


S t o r

e r o o

m

P r i v

a c y

w / d

e a d b o l t (

E U o n l y

)

D e a d

b o l t

M o n i t o

r ( D B

M )

6 2 5

L C 6 0 5

L F I C

( l e s

s c o r

e )

I n s t i t u

t i o n

D o o r

P o s i t i

o n ( D

P S )

6 2 6

C l a s

s r o o

m

R e q u

e s t -

t o - E x i t

( R E X

)

E n t r a

n c e

w / d e a d

b o l t

L a t c

h b o l t M

o n i t o r

( L B M

)

6 1 3

S 6 3 0

S F I C

( l e s

s c o r

e )


- = Not Applicable

= Available

( 1 4 H

/ 1 5 H t r

i m o

n l y )

( 1 4 H

/ 1 5 H t r

i m o

n l y )






ML45DEL

ML45DEU

ML45WEL

ML45WEU

-

-

ML453DEL

ML453DEU

-

-

400 400- 430 -

170 190- 190 -

760 815- - -

FAIL SAFE (EL)

FAIL SECURE (EU)

CHASSIS ONLY

add suffix (CH)

MODIFICATION

add prefix (MD)

COMPLETE LOCK

includes In-stock Trim3H3M

15H15M -

14H14M

-- - -

TS SS GS JS - -

75 75 75 75

MODIFICATION (Customer’s Best 45HD Chassis) / CHASSIS ONLY / COMPLETE LOCKSpecify Voltage and Handing. Special order trims and finishes available. Faceplates & Strikes available in 626 (see page 11 for pricing).

BEST 45

ML8080EL

ML8080EU

-

-

-

-

ML8053EL

ML8053EU

-

-

525 -- 560 -

170 -- 210 -

FAIL SAFE (EL)

FAIL SECURE (EU)

MODIFICATION (Customer’s Cal-Royal M8080 & M8453 Chassis) / COMPLETE LOCKSpecify Voltage and Handing.

MODIFICATIONadd prefix (MD)

CAL ROYAL

-

-

-

-

-

-

-

-

75 75CHASSIS ONLY

COMPLETE LOCK

includes In-stock Trim

- -

ML03EL

ML05EU

ML01EL

ML04EU

-

-

-

-

170 190- -

880 960- - -

FAIL SAFE (EL)

FAIL SECURE (EU)

CHASSIS ONLY

MODIFICATION

add prefix (MD)

COMPLETE LOCK


-

-

-

-

-

75 75 75

MODIFICATION (Customer’s Corbin ML2057 Chassis)/ COMPLETE LOCKSpecify Voltage. Faceplates & Strikes available in 613, 625, 626 (see page 11 for pricing)

CORBIN RUSSWIN

-

-

-

540 550


8/48


9/48


10/48


S t o r

e r o o

m

P r i v

a c y

w / d

e a d b o l t (

E U o n l y

)

D e a d

b o l t

M o n i t o

r ( D B

M )

6 2 5

L C 6 0 5

L F I C

( l e s

s c o r

e )

I n s t i t u

t i o n

D o o r

P o s i t i

o n ( D

P S )

6 2 6

C l a s

s r o o

m

R e q u

e s t -

t o - E x i t

( R E X

)

E n t r a

n c e

w / d e a d

b o l t

L a t c

h b o l t M

o n i t o r

( L B M

)

6 1 3

S 6 3 0

S F I C

( l e s

s c o r

e )


- = Not Applicable

= Available






ML80EL

ML80EU

ML82EL

ML82EU

ML70EL

ML70EU

ML480EL

ML480EU

-

ML485EU

415 435425 455 495

160 180170 200 250

920 985 03 06 07 17930 960 990

FAIL SAFE (EL)

FAIL SECURE (EU)

CHASSIS ONLY

add suffix (CH)

MODIFICATION

add prefix (MD)

COMPLETE LOCK


1, 2

1, 2

1

1

75 75 75 75

MODIFICATION (Customer’s Schlage L9050/9070 & L9453 Chassis) / CHASSIS ONLY / COMPLETE LOCKSpecify Voltage. Faceplates & Strikes available in 605, 606, 612, 613, 625, 626 & 630.

NOTES: 1. ML480/85 - REX & DBM only. 2. ML70 - REX only.RD & TD add List $63

SCHLAGE

ML90EL

ML91EU

ML94EL

ML95EU

-

-

-

-

-

-

540 550- - -

185 205- - -

FAIL SAFE (EL)

FAIL SECURE (EU)

CHASSIS ONLY

add suffix (CH)

MODIFICATION (Customer’s Yale 8808 Chassis) / CHASSIS ONLY Specify Voltage and Handing. Faceplates (List $65) & Strikes available in 626 (see page 11 for pricing). Fire link is removed for LBM.

MODIFICATION

add prefix (MD)

YALE

-

-

-

-

75 75 75

+50

* Limited availabity, please call to confirm stock.

*


11/48






Command Access ML1 series mortise lock field installable REX (Request to Exit) kit.

Storeroom function in specified finishes

DESCRIPTION

DESCRIPTION

Schlage L-series mortise lock field installable REX (Request to Exit) kit.

4-7/8” ASA Strike in specified finishes

Current Reduction Unit (Intelligent CRU2 w/ auto-voltage sensing from 12 - 30VDC) Use with 12V solenoids only(now non-polarized)

Request to Exit Switch installed in mortise lock

Latchbolt Monitoring Switch installed in mortise lock

Door Position Switch installed in mortise lock

Request to Exit Switch with Bypass option to shunt the signal during unlocked cycles installed in mortise lock

Deadbolt Monitoring Switch installed in mortise lock

Solenoid Monitor Switch installed in mortise lock

Security Monitor Switch installed in mortise lock

Available for ML1 and Schlage

Available on ML1, Sargent, Schlage and Yale

Available on Corbin, ML1, Sargent, Schlage and Yale

Current Reduction Unit (now non-polarized)

8-pin or 12-pin Molex Connectors added to locking device to retrofit ElectroLynx®

ElectroLynx® is a registered trademark of Assa Abloy

3-5’ Door Cord to connect a QC8 or QC12 prepped locking device to the power transfer product.

Auto voltage sensing (12-30 VDC) + CRU2i + REX (Available for Command Access ML1 series only)

$75

$35

LIST

LIST

$75

$35

$125

$40

$75

$40

$75

$75

$75

$95

$75

$125

$100

CATREXKIT-ML

Faceplate

PART

PART

SCHREXKIT-ML

Strike

RXBP

CRU2i

REX

CRU2

QC

LBM

QC W/ Lead

DBM

DPS

Door Cord QC

SLM

SCM

i-Option

SWITCH OPTIONS FOR MORTISE LOCKS

ACCESSORIES & REPLACEMENT FOR MORTISE LOCKS

$50

$85

Mortise Lock Replacement Solenoids (Specify brand, EL or EU and voltage)

Bridge Rectifiers w/ 12” Lead

$95

$20

SOL-ML

BR1

Bridge Rectifiers w/ 5’ Lead $30BR5

8-pin or 12-pin w/ 3-5 lead Molex Connectors added to locking device to retrofit ElectroLynx®

Add 4’ lead to any switch (per switch) $204’ Lead


12/48





C Y L

I N D R

I C A L

L O C K

S ELECTRIFIED CYLINDRICAL LOCKSCommand Access electrified cylindrical locks allow for remote keyless access

and egress control for standard commercial use applications where security

and safety is critical. Our aesthetically pleasing modifications conceal all partswithin the locksets, resulting in electrified locks that are indistinguishable

from standard mechanical ones. These locks are available in a variety of makes,

models, and finishes. Additionally, we offer multiple functions and voltages

to meet your requirements. Some common applications include computer

rooms, meeting rooms, classrooms and interior doors. Cylindrical locks may be

purchased as complete locksets or as modifications only (of customers’ locks). If

you don’t see the brand you need listed, please contact us.

Storeroom – Latchbolt retracted by key outside or lever inside.

Switched power allows outside lever to retract latchbolt. Inside

lever is always free for immediate egress.

Classroom – Latchbolt retracted by key outside or lever inside.

Switched power allows outside lever to retract latchbolt.

Outside lever can be maintained unlocked by key. Inside lever

is always free for immediate egress.

Storeroom Clutching – Latchbolt and deadbolt retracted by

key outside or lever inside. Switched power allows outside

lever to retract latchbolt and deadbolt. Inside lever is always

free for immediate egress.

REX - Request to Exit or AE switch available (depending on

manufacturer) - sends a signal to alert the control panel that

the door is about to be opened by someone intending to exit

from within the secured area

REXKIT-CL - Field Installable REX (Request to Exit ) switch kits

are available for a few cylindrical locks. Each kit includes the

switch assembly and all necessary items needed for quick field

installation. When utilized, the REX switch sends a signal to


someone intending to exit from within the secured area.

All Command Access modified cylindrical lever locks are available with REX monitor switches. All switches are SPDT (single pull,

double throw) and either mechanical or reed type. With the exception of a few field installable REX kits, all other REX switchesmust be installed at the factory. Here is a list of available switches and their definition.

FUNCTIONS

CYLINDRICAL LOCK SWITCH OPTIONS


13/48





H O W

T O O R D E

RELECTRIFIED CYLINDRICAL LOCKS

PREFIX

PREFIX

OPTIONS ACC.

ACC.OPTIONS

KEYWAY

KEYWAY

TRIM

TRIM

MODEL + FUNCTION

MODEL + FUNCTION

VOLTAGE

VOLTAGE

FINISH

FINISH

MODIFICATION ONLY

EXAMPLES

COMPLETE LOCK

MD

-

CL93DEL

CL180EU

-

L6

12

24

-

613

-

S

REX CRU2i

-REX

160

300

-

-

-

-

-

-

-

-

75 40

-

+

+

+

+

75

-

-

PART NUMBER

PART NUMBER

LIST

LIST

MD-CL93DEL-12

CL180EU-24-L6-613-S

$160

$300

FOR COMPLETE LOCKS ONLY

MODEL + FUNCTION

PREFIX

VOLTAGE

OPTIONAL SWITCHES

TRIM

FINISH (BHMA std)

KEYWAY

ACCESSORIES


EL (Fail Safe) - Electronically LockedEU (Fail Secure) - Electronically Unlocked

MD - Modification



– Tubular – Bent

– Straight – Curved

605 – Polished Bronze606 – Satin Brass612 – Satin Bronze

613 – Oil Rubbed Bronze625 – Polished Chrome626 – Satin Chrome

S – StandardLC – Less Cylinder

SFIC – Small Format I/CLFIC – Factory Large Format I/C

CRU2 – Current Reduction Unit (now non-polarized)CRU2i – Current Reduction Unit (Intelligent CRU2 w/ auto-voltage

sensing from 12 - 30VDC) now non-polarized, use with

12V solenoids only.3’ Lead – 3’ Wire Lead w/ connector(s)

4’ Lead – 4 Wire Lead w/ connector(s)QC – Molex Connectors

REXKIT-CL – Field installable REX (Request-to-Exit) switch kit


Additional Options

FOR MODIFICATION AND COMPLETE LOCKS

i-OPTION FOR CYLINDRICAL LOCKFor Command Access model #s only. Package includes:

• Intelligent auto voltage sensing 12-30 VDC

• Current reduction technology built-in• REX switch included


14/48


S t o r e r o o m

6 2 5

L C L F I C

( l e s s c o r e )

S t o r e r o o m

C l u t c

h i n g

6 2 6

C l a s s r o o m

R e q u e s t - t o

- E x i t ( R E X )

6 1 3

S S F I C

( l e s s c o r e )

Electrified Functions SwitchIn-stock Trim In-stockFinishes

Keyway

= Available- = Not Applicable





CL77EL

CL93DEL

-

CL78EU

CL93DEU

-

CL877EL

-

CLCR05EL

CL878EL

-

CLCR05EU

-

-

-

-

-

-

570

-

-

350

- -15C15D -

14C14D - - -

-

180

160

-

220

-

150

-

-

-

FAIL SAFE (EL)

FAIL SAFE (EL)

FAIL SAFE (EL)

FAIL SECURE (EU)

FAIL SECURE (EU)

FAIL SECURE (EU)

COMPLETE LOCK


COMPLETE LOCK


MODIFICATION ONLY (Customer’s Arrow Q12 or H12 for rigid lever and Arrow Q82 for clutching lever)Specify Voltage.

MODIFICATION (Customer’s Best 93K Series) / COMPLETE LOCKSpecify Voltage. Typically Stocked Finishes - 626. C & D Roses Available

MODIFICATION (Customer’s Cal Royal CGN05) / COMPLETE LOCKSpecify Voltage. Typically Stocked Finishes - 605, 612, 613, 625, 626.

MODIFICATION

add prefix (MD)

MODIFICATION

add prefix (MD)

MODIFICATION

add prefix (MD)

75

75

75


ARROW

BEST

CAL ROYAL


15/48


S t o r e r o o m

6 2 5

L C L F I C

( l e s s c o r e )

S t o r e r o o m

C l u t c

h i n g

6 2 6

C l a s s r o o m

R e q u e s t - t o

- E x i t ( R E X )

6 1 3

S S F I C

( l e s s c o r e )


Keyway

= Available- = Not Applicable

6 2 5

6 0 5

6 2 6

S S F I C

L C 6 1 3

6 3 0

L6 L7* L17 -

PASSAGE

CL1010

ENTRY/OFFICE

CL1053

PRIVACY

CL1040

CLASSROOM

CL1070

175 185180 185COMPLETE LOCK


COMPLETE LOCKTypically Stocked Finishes - 605, 612, 613, 625, 626.

COMMAND ACCESS

MECHANICAL

FUNCTION

MODEL

STOREROOM

CL1080

185 -





-

-

CL03EL

CL05EU

-

-

- 580- - NZD - PZD -

- 160-

FAIL SAFE (EL)

FAIL SECURE (EU)

COMPLETE LOCK


MODIFICATION (Customer’s Corbin CL3357) / COMPLETE LOCKSpecify Voltage. Typically Stocked Finishes - 613, 625, 626.

MODIFICATION

add prefix (MD) 75


CORBIN RUSSWIN

-

-

CL180EL

CL180EU

-

-

- L6 L7* L17 - -- 300-

FAIL SAFE (EL)

FAIL SECURE (EU)

COMPLETE LOCKSpecify Voltage. Typically Stocked Finishes - 605*, 612*, 613, 625, 626. Available with i-Option.

COMPLETE LOCK

includes In-stock Trim75

COMMAND ACCESS



-

*

* *


16/48


S t o r e r o o m

6 2 5

L C L F I C

( l e s s c o r e )

S t o r e r o o m

C l u t c

h i n g

E x i t

6 2 6

C l a s s r o o m

R e q u e s t - t o

- E x i t ( R E X )

6 1 3

S S F I C

( l e s s c o r e )


Keyway

- = Not Applicable

= Available

- -- --






CL370EL

CL371EU

-

-

-

-

580 --

160 --

FAIL SAFE (EL)

FAIL SECURE (EU)

COMPLETE LOCK


MODIFICATION (Customer’s Sargent 10G04) / COMPLETE LOCKSpecify Voltage. Typically Stocked Finishes - 613, 625, 626. Call for availability.

MODIFICATION

add prefix (MD)75

SARGENT

-

-

CLFEL

CLFEU

-

-

- 180-

FAIL SAFE (EL)

FAIL SECURE (EU)

MODIFICATION ONLY (Customer’s Marks 195F)Specify Voltage.

MODIFICATION

add prefix (MD)75

MARKS

CLC5400EL

CLC5400EU

-

-

-

-

180 --

FAIL SAFE (EL)

FAIL SECURE (EU)

MODIFICATION ONLY (Customer’s LSDA C5400 Grade One Lock)Specify Voltage.

MODIFICATION

add prefix (MD)75

LSDA

CLN80EL

CLN80EU

CLN96EL CLN12EL

CLN96EU CLN12EU

CLN70EL

CLN70EU

600 610 540600 - RHO ATH* SPA

140 150 140140

FAIL SAFE (EL)

FAIL SECURE (EU)

COMPLETE LOCK


MODIFICATION (Customer’s Schlage ND12PD, ND70PD, ND80PD, ND94PD, ND96PD) / COMPLETE LOCKSpecify Voltage. Typically Stocked Finishes - 605, 606, 612, 613, 625, 626. Classic ‘C’ type keyway comes standard.

Add $25 list for Schlage original C & Everest C123. Add 12.50 list for Control key.. Add $63 List net for RD & TD (No upcharge for JD).

*Athens Handle Style Only Available in PD - 626

MODIFICATION

add prefix (MD)75

SCHLAGE

-

-

-

-

-

-

-

-

-

-

+50+30


17/48






Factory installed only - Cylindrical Lock Replacement Solenoids (Specify brand, EL or EU and voltage).Cannot be field installed.

DESCRIPTION

Current Reduction Unit (Intelligent CRU2 w/ auto-voltage sensing from 12 - 30VDC) Use with 12V solenoids only.

(now non-polarized)


$95

LIST

$40

$40

SOL-CL

PART

CRU2i

CRU2

ACCESSORIES & REPLACEMENTS FOR CYLINDRICAL LOCKS

Request to Exit Switch installed in cylindrical lock

DESCRIPTION

Request to Exit Switch installed on CAT CL1 series Anti-Rotation Plate

Schlage ND series Anti-Rotation Plate with Request to Exit (REX) switch installed

$75

LIST

$85

$85

REX

PART

SCHREXKIT-CL

CATREXKIT-CL

SWITCH OPTIONS FOR CYLINDRICAL LOCKS


Auto voltage sensing (12-30 VDC) v+ CRU2i + REX (Available for Command Access CL1 series only) $100i-Option


3-5’ Door Cord to connect a QC8 or QC12 prepped locking device to the power transfer product. $95

QC

QC W/ Lead

Door Cord QC

$50

$85

Bridge Rectifiers w/ 12” Lead $20BR1



Add 4’ lead to REX switch $204’ Lead


18/48





E X

I T T R I M


Our exit device trim modifications are perfect for stairwell conditions or

applications where electric pullback of the exit device’s latchbolt is cost

prohibitive or not required. This is especially practical in applications wherefire/life safety codes require a “fail safe” condition which is not an option with

electrified latch pullback devices. Because the current draw is quite low there is

no need for a more expensive power supply to provide the surge current.

STOREROOM (EL / fail safe) – Outside lever locked

electronically. Switched power allows outside lever to retract

the latch(es). Depending on the model, the outside key either

momentarily unlocks outside lever to retract latch(es) or

momentarily retracts the latch(es) directly. Inside push pad is

always free for immediate egress.

STOREROOM (EU / fail secure) – Outside lever unlocked

(EU) electronically. Switched power allows outside lever to

retract latch(es). Depending on the model, the outside key

either momentarily unlocks outside lever to retract latch(es) or

momentarily retracts the latch(es) directly. Inside push pad is

always free for immediate egress.

Most Command Access electrified/modified exit trims are available with an REE (Request to Enter) switch. This switch is a SPDT

(single pull, double throw) switch that sends a signal to alert the control panel that the door is about to be opened by someoneintending on entering a secured area. This switch must be installed at the factory.

FUNCTIONS

EXIT TRIM SWITCH OPTIONS


19/48





H O W

T O O R D E

RELECTRIFIED EXIT TRIM

PREFIX

PREFIX

OPTIONS

OPTIONS

KEYWAY

KEYWAY

TRIM

TRIM

MODEL + FUNCTION

MODEL + FUNCTION

VOLTAGE

VOLTAGE

FINISH

FINISH

MODIFICATION ONLY

EXAMPLES

COMPLETE TRIM

MD

-

CR22EL

ET25EU

-

L6

12

12

-

626

-

-

REE

-

250

400

-

-

-

-

-

-

-

-

75+

+

+

+-

-

-

PART NUMBER

PART NUMBER

LIST

LIST

MD-CR22EL-12

ET25EU-12-L6-626

$250

$400

FOR COMPLETE TRIM ONLY

MODEL + FUNCTION

PREFIX

VOLTAGE

OPTIONAL SWITCHES

TRIM

FINISH (BHMA std)

KEYWAY


EL (Fail Safe) - Electronically LockedEU (Fail Secure) - Electronically Unlocked

MD - Modification


REE – Request-to-Enter

– Tubular – Bent

– Straight – Curved

605 – Polished Bronze

606 – Satin Brass612 – Satin Bronze

613 – Oil Rubbed Bronze

625 – Polished Chrome

626 – Satin Chrome630 – Satin Stainless Steel

Cylinders Not Included with Exit Trim


Additional Options

FOR MODIFICATION, CHASSIS ONLY AND COMPLETE LOCKS

ACCESSORIESCRU2 – Current Reduction Unit (new improved circuitry)CRU2i – Current Reduction Unit (Intelligent CRU2 w/ auto-voltage

sensing from 12 - 30VDC) Use with 12V solenoids only.3’ Lead – 3’ Wire Lead w/ connector(s)4’ Lead – 4’ Wire Lead w/ connector(s)

QC – Molex Connectors


20/48

For Complete Exit Trim Only

S t o r

e r o o

m w / k e y

o v e

r r i d

e

6 2 5

6 2 8

6 2 6

S t o r

e r o o

m w / o k e

y o v

e r r i d

e

S L C R e q u

e s t -

t o - E n t e

r ( R E

E )

6 1 3

3 1 3

ElectrifiedFunctions

Keyway SwitchIn-stock Trim In-stock Finishes

- = Not Applicable

= Available






CR22EL

CR98EL

CR77EL

CR22EU

CR98EU

CR77EU

-

-

-

-

-

-

250

250

250

-

-

-

FAIL SAFE (EL)

FAIL SAFE (EL)

FAIL SAFE (EL)

FAIL SECURE (EU)

FAIL SECURE (EU)

FAIL SECURE (EU)

MODIFICATION

add prefix (MD)

MODIFICATION

add prefix (MD)

MODIFICATION

add prefix (MD)

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

75

75

75

MODIFICATION ONLY (Customer’s Cal Royal NESC22 Trim)Specify Voltage and Handing. SVR and RIM versions only.



CAL ROYAL

CAL ROYAL

CAL ROYAL


21/48


S t o r

e r o o

m w / k e y

o v e

r r i d

e

6 2 5

6 2 8

6 2 6

S t o r

e r o o

m w / o k e

y o v

e r r i d

e

S L C R e q u

e s t -

t o - E n t e

r ( R E

E )

6 1 3

3 1 3



- = Not Applicable

= Available






ET25EL

ET25EU

-

-

400 -

FAIL SAFE (EL)

FAIL SECURE (EU)

COMPLETE TRIM


-

-

- 75

COMPLETE TRIM FOR COMMAND ACCESS PD26 SVR & RIM ONLY Specify Voltage. Schlage C ccompatible cylinder included. Retrofits Cal-Royal 7700RIM/SVR, Von Duprin 98/99 RIM/CVR/SVR

L3* L6 L7* L17* - - -

COMMAND ACCESSET25

*Limited Availability

ENTRANCE NIGHT LATCH

230 150

RIM/SURFACE VERTICAL

COMPLETE TRIM

includes In-stock Trim-

COMPLETE TRIM FOR COMMAND ACCESS PD25Schlage C ccompatible cylinder included. Retrofits Cal-Royal 7700 series

L3* L6 L7* L17* - - -

COMMAND ACCESSMECHANICAL ET26

*Limited Availability

ET26R/SVR

FUNCTION

ET26NL

ET16RIM

ET16CVR

-

-

200 -COMPLETE TRIM


-

-

-

COMPLETE TRIM FOR COMMAND ACCESS PD15 CVR & RIMSpecify Handing. Cylinder not included

- L6 - - - - -

COMMAND ACCESSMECHANICAL ET16

ET15ELCVR

ET15ELRIM

ET15EUCVR

ET15EURIM

-

-

-

-

375 -

FAIL SAFE (EL)

FAIL SAFE (EL)

FAIL SECURE (EU)

FAIL SECURE (EU)

COMPLETE TRIM


-

-

-

-

- 75

COMPLETE TRIM FOR COMMAND ACCESS PD16 CVR & RIMSpecify Voltage and Handing. Cylinder not included

- L6 - - - - -

COMMAND ACCESSET15

-

75

75

2

+10

2- Only available for Entrrance Functions

ENTRANCE NIGHT LATCHFUNCTION

RIM

CONCEALED VERTICAL ET26CVR ET26NL

MORTISE ET26MORT ET26NL

1- Retrofits Von Duprin 98/99 RIM/CVR/SVR

1

CONCEALED VERTICAL

-

-

-

-


22/48


S t o r

e r o o

m w / k e y

o v e

r r i d

e

6 2 5

6 2 8

6 2 6

S t o r

e r o o

m w / o k e

y o v

e r r i d

e

S L C R e q u

e s t -

t o - E n t e

r ( R E

E )

6 1 3

3 1 3



- = Not Applicable

= Available

PRECISION






SGT700EL

PH49EL

SGT700EU

PH49EU

-

-

-

-

250

250

-

-

FAIL SAFE (EL)

FAIL SAFE (EL)

FAIL SECURE (EU)

FAIL SECURE (EU)

MODIFICATION

add prefix (MD)

MODIFICATION

add prefix (MD)

-

-

-

-

-

-

-

-

-

-

-

-

75

75

MODIFICATION ONLY (Customer’s Sargent 713 Trim only)Specify Voltage and Handing.

MODIFICATION ONLY (Customer’s Precision 4900 Series Trim)

Specify Voltage and Handing. Cylinder not included

SARGENT

FAL551

H45CEEL

FAL581

H45CEEU

-

-

-

-

250

250

-

-

FAIL SAFE (EL)

FAIL SAFE (EL)

FAIL SECURE (EU)

FAIL SECURE (EU)

MODIFICATION

add prefix (MD)

MODIFICATION

add prefix (MD)

-

-

-

-

-

-

-

-

-

-

-

-

75

75

MODIFICATION ONLY (Customer’s Falcon 510 Trim)Specify Voltage and Handing.

MODIFICATION ONLY (Customer’s Hager 45CE Trim)Specify Voltage and Handing.

FALCON

HAGER


23/48


S t o r

e r o o

m w / k e y

o v e

r r i d

e

6 2 5

6 2 8

6 2 6

S t o r

e r o o

m w / o k e

y o v

e r r i d

e

S L C R e q u

e s t -

t o - E n t e

r ( R E

E )

6 1 3

3 1 3



- = Not Applicable

= Available

VON DUPRIN






V96EL

V96EU

V96EL

V96EU

210 210

FAIL SAFE (EL)

FAIL SECURE (EU)

MODIFICATION

add prefix (MD)

-

-

-

-

-

75

MODIFICATION ONLY (Customer’s Von Duprin 996L-R/V, L-M, L-BE Trim)Specify Voltage and Handing. Consult factory for additional finishes and modification of discontinued 992L Trim.

V23EL

V37EL*

V23EU

V37EU*

-

-

195

500

575

-

-

-

FAIL SAFE (EL)

FAIL SAFE (EL)

FAIL SECURE (EU)

FAIL SECURE (EU)

MODIFICATION

add prefix (MD)

MODIFICATION

add prefix (MD)

COMPLETE TRIM


-

-

-

-

-

-

-

-

-

-

-

-

-

-

75

75

MODIFICATION ONLY (Customer’s Von Duprin 230L Trim) / COMPLETE TRIM (CAT Modified Von Duprin 230L Trim)Specify Voltage and Handing.

MODIFICATION ONLY (Customer’s Von Duprin L/BE/T versions of Model #’s: 371,372, 373, 374, 376, 377, 379)Specify Voltage and Handing.

- 06 - - - - -

VON DUPRIN

VON DUPRIN

V36EL

V36EU

- 500

FAIL SAFE (EL)

FAIL SECURE (EU)

MODIFICATION

add prefix (MD)

-

-

-

-

-

- 75

MODIFICATION ONLY (Customer’s Von Duprin L/BE/T versions of Model #: 360)Specify Voltage and Handing.

VON DUPRIN

-

-

-

-

Note: A dummy cylinder will be added to all cylinder prep trims.

Note: BE (Blank Escutcheon) trims do not have key override.

-

750 750COMPLETE TRIM

includes in-stock trim- -06

Note: BE (Blank Escutcheon) trims do not have key override.

*Call for availability

03* - 17* ----


24/48





Replacement Solenoids for Exit Trim (Specify brand, EL or EU and voltage) * $95SOL-ET


ACCESSORIES & REPLACEMENT PARTS FOR EXIT TRIM


DESCRIPTION


LIST

$40

$40

PART

CRU2i

CRU2

* Please call to confirm replacement solenoid can be replaced in the field

Current Reduction Unit (Intelligent CRU2 w/ auto-voltage sensing from 12 - 30VDC) Use with 12V solenoids only(now non-polarized)


3-5’ Door Cord to connect a QC8 or QC12 prepped locking device to the power transfer product. $95

QC

QC W/ Lead

Door Cord QC

$50

$85

Bridge Rectifiers w/ 12” Lead $20BR1



Add 4’ lead to REE switch $204’ Lead


25/48





NOTES


26/48





E X I T D E V I C E S & K I T S

LPEU (FAIL SECURE) - Exit device latch(es) retracted with switched power allowing for outside access or auto operator

integration. Without power, the device and latch(es) are secured (locked). Inside push pad always allows for free egress.

RIM - Rim type exit device with surface mounted push pad and

one point latching.

SVR - Surface Vertical Rod type exit device with surface

mounted push pad and two-point latching.

CVR - Concealed Vertical Rod type exit device with surface

mounted push pad and two-point locking.

MORTISE - Mortise pocket installed exit device with surface

mounted push pad and one-point locking.

REX - Request to Exit switch - sends a signal to alert the

control panel that the door is about to be opened by someone

intending to exit from within the secured area.

LBM - LatchBolt Monitor switch - sends a signal to the control

panel to monitor the position of the latchbolt.

REXKIT-ED - Field Installable REX (Request to Exit ) switch kits

are available for a variety of exit devices. Each kit includes the

switch assembly and all necessary items needed for quick field

installation. When utilized, the REX switch sends a signal to


someone intending to exit from within the secured area.

LBMKIT-ED - Field Installable LBM (LatchBolt Monitor) switch

kits are available for a variety of exit devices. Each kit includes

the switch assembly and all necessary items needed for quick

field installation. When utilized, the LBM sends a signal to the

control panel to monitor the position of the latchbolt.

Command Access offers a variety of factory and field installable exit device monitoring switches. Each mechanical switch is

SPDT (single pull, double throw) and capable of greater than 1 amp @ 24 volts. Common applications employ these switches to

monitor egress and device positioning to ensure the most secure assembly possible.

FUNCTIONS

TYPES

EXIT DEVICE SWITCH OPTIONS

Factory Installed Switches

Field Installable Switches

STOREFRONT & ARCHITECTURALELECTRIFIED EXIT DEVICES & KITS

Our electrified latch pullback modification of storefront & architectural

exit devices allows for remote keyless access control in high occupancy

/ high traffic conditions where exit devices are required. Common

applications include conditions such as hospitals, airports, schools,

churches and they are commonly specified in applications that require

automatic door openers. The device may be continuously energized

allowing for a push/pull condition if desired. We stock many types of

Command Access and other manufacturer’s exit devices. These devices

can be factory electrified along with a variety of field electrification kits

available. Our NEW Push-to-Set technology is currently available on

the motorized Von Duprin kits with other models coming soon! Call for

availability.

Scan or Click herefor more PTS information

http://media.virbcdn.com/files/84/694684eb9765ddba-PTS_Handout.pdfhttp://media.virbcdn.com/files/84/694684eb9765ddba-PTS_Handout.pdfhttp://media.virbcdn.com/files/84/694684eb9765ddba-PTS_Handout.pdf


27/48





H O W

T O O R D E

RELECTRIFIED EXIT DEVICES & KITS

PREFIX

PREFIX

PREFIX

PREFIX

OPTIONS

OPTIONS

OPTIONS

OPTIONS

SIZE

SIZE

SIZE

SIZE

MODEL + FUNCTION

MODEL + FUNCTION

MODEL + FUNCTION

MODEL + FUNCTION

VOLTAGESUFFIX

VOLTAGESUFFIX

VOLTAGE

VOLTAGE

SUFFIX

SUFFIX

FINISH

FINISH

FINISH

FINISH

MODIFICATION ONLY - SOLENOID DRIVEN

EXAMPLES

ELECTRIFIED DEVICE KIT

MODIFICATION ONLY - MOTOR DRIVEN

COMPLETE MOTOR DRIVEN DEVICE

MD

KEY: MD = MODIFICATIONM = MOTOR DRIVEN

-

MD

-

FIRLPEU

VLPKIT

ARLP86

PD25

-

36

-

36

24-

24-

24

24

M

M

-

-

-

626

REX

REX

REX

REX

450

425

500

950

-

-

-

-

--

--

-

-

-

-

-

-

-

75+

+

+

+

+

+

+

+

75

75

75

-

-

-

-

PART NUMBER

PART NUMBER

PART NUMBER

PART NUMBER

LIST

LIST

LIST

LIST

MD-FIRLPEU-24

VLPKIT36

MDARLP86-M-24

PD25-M--RIM-24-36-626

$450

$425

$500

$950

FOR COMPLETE DEVICE ONLY

MODEL + FUNCTION

PREFIX

VOLTAGE

OPTIONAL SWITCHES

SIZE (Width of device)

FINISHSelect a model number and add

EU (Fail Secure) - Electronically Unlocked only

MD - Modification

24 Volts only


LBM – Latchbolt Monitor

36 – 36” wide device42 – 42” wide device

48 – 48” wide device

STOREFRONT

628 – Aluminum313 – Duronatic


Additional Options

FOR MODIFICATION AND COMPLETE DEVICE

ACCESSORIES3’ Lead – 3’ Wire Lead w/ connector(s)

4’ Lead – 4’ Wire Lead w/ connector(s)QC – Molex Connectors

ARCHITECTURAL

626 – Satin Chrome613 – Oil Rubbed Bronze

-


28/48

For Complete Device Only

4 8 ”

6 2 8

3 6 ”

6 2 6

R e q u

e s t - t o

- E x i t ( R E X

)

L a t c h b

o l t M

o n i t o r

( L B M

)

4 2 ”

6 1 3

Electrified Functions OptionalSwitches

Sizes

R I M

In-stock Finishes

Command Access Technologies- Oct 2014

Documents

Transcript of Command Access Technologies- Oct 2014