8/14/2019 Cleaning Tailings Ponds for Oil Sands Industries_1

1/2

GASOSYN Energies Canada

800, Place Victoria, R. 522, Montral (Qc) H4Z 1A1

Oil Sands Solutions.

GASOSYN Energies Canada is a division of ranbec cda ltd, a companyestablished 35 years ago to work in energies, biomass and gas industries.

GASOSYN Energies Canadais promoting the installation of Thermocyclingtm plants, usinour thermocracking reactor called GASOSYNtm.

We are proposing a new and unique solution to clean the polluted tailings ponds resulting fromrejected water from oil sands treatment.

Our solution is to use our Thermocyclingtmprocess. Taking for example, 100 poundsof oil sands, collected and transported to the treatment plant, to fuel the GASOSYNtm, we can get1to 1,3 barrel of clean distillated water from tailings ponds.

These dirty tailings ponds can be emptied and the cleaned water reused in boilersfor steamunderground injection processes, to recover the oil.

The sand, used for fuel, exiting the GASOSYNtm, is in fact sterilized at high temperaturesand isfree of oil. No other product added, only oil is taken out from the sand. It can then be used forreclaiming or other uses...

The solids from the tailingsponds are circulated in the GASOSYNtmand dried, while traces oforganics in it are used as fuel in the process. Dried solids can be disposed of in numerous ways.

AThermocyclingtmplant can be adapted to numerous other applications. The cleaned SYNGAScan replace natural gas or, with additional transformation, generate diesel or gasoline, stillhaving enough residual heat to distillate water in tailings ponds

.

See the following diagram of our oil sands treatment and our web site: gasosyn.com

8/14/2019 Cleaning Tailings Ponds for Oil Sands Industries_1

2/2

800, Place Victoria, R. 522, Montral (Qc) H4Z 1A1Tl.: 514-942-8630, fax: 450-723-1301 Courriel: franbec@contact.net

100 pounds of oil sand can produce 1 to 1.3 barrel of distillated water.A ThermocyclingtmPlant is an assembly of technologies to use the residual heat from hydrocarbothermocracking and maximize the overall process efficiency. The source of fuel can be any type of soor liquid organic materials but we give priority to raw oil sands and/or residues of heavy fractions, npumpable to the refinery. With Thermocyclingtmthe heat sources are used to distillate the polluted wafrom storage ponds. We recover the organics and return the cleaned water, to replace the fresh water boiler uses or directed back to the river under continuous sampling recording.

Using a ThermocyclingtmPlant will make oil sands industries more ecological friendly.

Thermocycling applied to Albertas Oil Sands to clean ponds of dirty water.

Oil sands extraction produces dirty waterusually held in ponds. Raw oil sand ascollected can be used to feed ourGASOSYNtmThermocracker. No other fuelrequired. We have our own autonomy; noconnections needed to natural gas orelectricity.

Existing facilities above the red dotted line with our Thermocycling plant process added under red line.

Steam oil to pipelineto the refinery

New cleaned water for boiler

OR back to RIVER

ADDED FACILITIES THERMOCYCLINGTO CLEAN polluted water PONDSUSING only raw oil sand as the FUEL

Clean distilledHot Recovered water back to River

Syngas heat

DirtyConditioned Water from pondsSYNGAS

SLUDGE

Existing Steam boiler

Waterfeeder

Existing facilities forOil Sands processingunits.

Natural as Existing sourceWater from wellsor river

Heavyfractions

Heat recovery&Syngasconditioning

GASOSYNm

REACTOR UP TO20 T/h raw oil Sand

Heat recovery andDistillation Unit

Combustiblefeeder

Ponds of dirty andcontaminated water readyto be cleaned to recoveroil and minerals in it.

FEEDSTOCKS AS A COMBUSTIBLE:

- Raw Oil sands as collected;

- Heavy petroleum fractions from

CleanSand