Cim-tek CLM

7/28/2019 Cim-tek CLM

1/14


2/14

CenturionIw/Adaptor

Designed for highvolume service station applications,commercial fueling centers, marine fueling centers, agriculturafueling, and truck stop fueling centers

Filter housings and replaceable elements are compatible withgasoline, diesel, methanol and ethanol blends up to 10%,biodiesel up to B20, and ultra-low sulfur diesel (ULSD)

Filter housings may be used in hydraulic oil applications

Demonstrated extended equipment life

Assures delivery of quality fuel

Cleaner change-out with draincock design

Eco-friendly reusable housing

Application

CENTURION I

Design Features

Benefits

HIGHVOLUMESingle Housing Assembly

30 gpm (113 lpm) maximum flow

Standard 1" NPT inlet/outlet flow area

Elements are available in 10 and 30micron paper for particulate removal

Elements are available in 10 and 30micron Hydrosorbmedia for waterdetection and particulate removal

Elements are available in 2 micronCellulose/Microglass blend for longerlife of particulate removal

Equipped with a draincock for easydrainage of captured contaminants

MODEL: CENTURION I

5.1

PETROLEUMFILTER TECHNOLOGY FOR PETROLEUM PRODUCTS


3/14

Centurion I Dimensional Information

Ordering Information

Centurion I Elements

Part No. Model Description

Single

Adaptor40001

Part No. Model No. Description

E0230065

30002

30004

30033

30036

E10

E30

EHS-10

EHS-30

30195 E-10M Element for Particulate Removal. 10 Micron High Performance Micgroglass Med

Element for Particulate Removal. HighPerformance 2 Micron Microglass/Cellulo

Media Blend.

Element for Particulate Removal. 10 Micron Cellulose Media.


Element for Water Detection and Particulate Removal. 10 Micron HydrosorbMedia.


Centurion I w/Adaptor Filter Element Section View of Element

14 1/2"

5 1/4"4 1/2"

9 1/16"

NOTE: 1. Element includes gaskets, washer, and filter element.

2. Filters are not to be used with aviation applications.

Housing Kit Consisting of Adaptor, Housing, Washer, Acorn Nut, and Draincock.

Element Not Included. (1"NPT Inlet/Outlet)

201 N. CHAMPAIGN STREET BEMENT, IL 61813 TOLL FREE PHONE: 888-898-7187 TOLL FREE FAX: 888-515-2611PHONE: 217-678-2511 FAX: 217-678-2611 [email protected] WWW.CIM-TEK.COM

CENTRAL ILLINOIS MANUFACTURING COMPANY

Material: Aluminum adaptor

Used on: Centurion I

Inlet/Outlet ports: 1" NPT

Description DimensionsAdaptor Part No.

90004


4/14

Designed for high-volume service station applications,commercial fueling centers, marine fueling centers, agriculturafueling, and truck stop fueling centers

Filter housings and replaceable elements are compatible withgasoline, diesel, methanol and ethanol blends up to 10%,biodiesel up to B20, and ultra-low sulfur diesel (ULSD)


Parallel flow applications


Assures delivery of quality fuel

Cleaner change-out with draincock design

Eco-friendly resuable housing


Standard 1 1/2" NPT inlet/outlet flow



Elements are available in 2 micronCellulose/Microglass blend forlonger life

Equipped with a draincock

CENTURION III

Centurion IIIw/Adaptor

CENTURION IIIHIGHVOLUMEDual Housing Parallel Flow

5.5



5/14

Centurion III Dimensional Information


Centurion III Elements


Dual

Adaptor40013


E0230065

30002

30004

30033

30036

E10

E30

EHS-10

EHS-30

Filter ElementSection View of Element

4 1/2"

9 1/16"

Centurion III w/Adaptor

14 1/2"

10 1/2"


2. Filters are not to be used with aviation applications.

3. Centurion III requires two elements.

Element for Particulate Removal. High Performance 2 Micron Microglass/Cellulo

Media Blend.



Element for Water Detection and Particulate Removal. 10 Micron Hydrosorb

Media.

Element for Water Detection and Particulate Removal. 30 Micron Hydrosorb

Media.


Element Not Included. (1 1/2" NPT Inlet/Outlet)




Used on: Centurion III

Inlet/Outlet ports: 1 1/2" NPT


90014

30195 E-10M Element for Particulate Removal. 10 Micron High Performance Micgroglass Med


6/14

Designed for highvolume service station applications,commercial fueling centers, marine fueling centers, agriculturalfueling, and truck stop fueling centers

Filter housings and replaceable elements are compatible with

gasoline, diesel, methanol and ethanol blends up to 10%,biodiesel up to B20, and ultra-low sulfur diesel (ULSD)


Triple parallel flow applications

90 gpm flow capacity


Numerous element options

Assures delivery of quality fuels


Standard 2" NPT inlet/outlet flow



Elements are available in 2 micronCellulose/Microglass blend for longerlife

Equipped with a draincock for easydrainage of captured contaminants

CENTURION IV

CENTURION IVHIGHVOLUMEThree Element Parallel Flow

Centurion IVw/Adaptor

5.7



7/14

Centurion IV Dimensional Information


Centurion IV Elements


Triple

Adaptor40020


E0230065

30002

30004

30033

30036

E10

E30

EHS-10

EHS-30

Filter ElementSection View of Element

4 1/2"

9 1/16"

Centurion IV w/Adaptor

14 1/2"

10 1/2"


2. Consult Cim-Tek Filtration for oil, methanol, and ethanol compatability. 3. Filters are not to be used with aviation applications. 4. Centurion IV requires three elements.



Element for Particulate Removal. High Performance 2 Micron Microglass/Cellul

Media Blend.






Element Not Included. (2" NPT Inlet/Outlet)


Used on: Centurion IV

Inlet/Outlet ports: 1" NPT


90015

30195 E-10M Element for Particulate Removal. 10 Micron High Performance Micgroglass Me


8/14

Application

VIKING 1

Design Features

Benefits

FILTER HOUSING

Capable of filtering gasoline, ethanol blends up to E15, biodieseblends up to B100, diesel fuel, ultra-low sulfur diesel (ULSD), anfuel oils

Industrial fluids such as lubrication oils, hydraulic oils, syntheti

oils, transformer oils, many solvents, and thinners may be filter

Bulk fueling racks and bulk fluid transfer

Removes common contaminants such as dirt, dust, and rust

Increased filtering capacity

Easy opening and access with swing down lid

Full ASME Certification available


150 psi rating

Standard 2" NPT inlet/outlet flow,flanged available

Epoxy coated on inside and outside

3 bolt swing down lid

Inlet to Outlet dimensions 12"(2" NPT)

Inlet to Outlet dimensions 13 1/2"(Flanged model)

12"x12" bottom plate

Carbon Steel housing

1/4" ports for the optional pressuregauge kit

Requires 1 6"x18" element

MODEL: VIKING 1 & 1F

6.1

Viking 1FFlanged

PETROLEUMFILTER TECHNOLOGY FOR PETROLEUM PRODUCT


9/14



6.2


Viking 1 DimensionalInformation

Viking 1 Housing

Top View of Lid

6"

18"

E-1300-02

E-1300-10

E-1300-30

E-1300MG-03

E-1300MG-05

E-1300MG-10

E-1300HS-10

E-1300HS-30

Viking 1 ElementsPart No. Model Description Use With

30066

30008

30009

30204

30203

30202

30034

30037

Element for Particulate Removal. 2 Micron Cellulose/Microglass

Media Blend.



Element for Particulate Removal. 3 Micron High PerformanceMicroglass Media.


Element for Particulate Removal. 10 Micron High Performance

Microglass Media.

Element for Water Detection and Particulate Removal. 10 MicronHydrosorb Media.


All Above

All Above

All Above

All Above

All Above

All Above

All Above

All Above

Replacement Gaskets

90560 Standard Main Buna Gasket Seal Used On All Above

90599 Optional Main Viton Gasket Seal On All Above

Part No. Description

NOTE: Filters are not to be used with aviation applications.

NOTE: Viking 1 & 1F require one element.

32 1/2"28 1/2"

3 3/8"

7 1/2"

12"

Inlet Outlet

12"

9 1/2"

40186

40187

Viking 1

Viking 1FFlanged

Part No. Model Description (Elements Not Included.) Flow PSI NPT

Epoxy Coated Inside/Out Carbon Steel Filter Housing. 120 gpm 2" NPT

Epoxy Coated Inside/Out Carbon Steel Filter Housing. 120 gpm

150 psi

150 psi


10/14

Capable of filtering gasoline, ethanol blends up to E15, biodieseblends up to B100, diesel fuel, ultra-low sulfur diesel (ULSD), anfuel oils

Industrial fluids such as lubrication oils, hydraulic oils, synthetoils, transformer oils, many solvents, and thinners may be filter


VIKING 2FILTER HOUSING

Viking 2F Flanged

MODEL: VIKING 2 & 2F

Design Features

BenefitsRemoves common contaminants such as dirt, dust, and rust


Easy opening and access with swing down lid


150 gpm (567.8 lpm) maximum flow

150 psi rating

Standard 2" NPT inlet/outlet flow,flanged available


3 bolt swing down lid

Inlet to Outlet dimensions 12"(2" NPT)

Inlet to Outlet dimensions 13 1/2"(Flanged model)

12"x12" bottom plate



Requires 2 6"x18" elements

6.3



11/14

Viking 2 Dimens ionalInformation

Top View of Lid

Filter Element

6"

18"

201 N. CHAMPAIGN STREET BEMENT, IL 61813 TOLL FREE PHONE: 888-898-7187 TOLL FREE FAX: 888-515-2611

PHONE: 217-678-2511 FAX: 217-678-2611 [email protected] WWW.CIM-TEK.COM



E-1300-02

E-1300-10

E-1300-30

E-1300MG-03

E-1300MG-05

E-1300MG-10

E-1300HS-10

E-1300HS-30

Viking 2 ElementsPart No. Model Description Use With

30066

30008

30009

30204

30203

30202

30034

30037


Media Blend.






Microglass Media.


Element for Water Detection and Particulate Removal. 30 Micron

Hydrosorb Media.

All Above

All Above

All Above

All Above

All Above

All Above

All Above

All Above

Replacement Gaskets

90560 Standard Main Buna Gasket Seal Used On All Above

90599 Optional Main Viton Gasket Seal Used On All Above



NOTE: Viking 2 & 2F require two elements.

Viking 2 Housing12"

7 1/2"Inlet Outlet

3 3/8"

46 1/2"

50 1/2"

9 1/2"

12"

40188

40189

Viking 2

Viking 2FFlanged


Epoxy Coated Inside/Out Carbon Steel Filter Housing. 150 gpm 2" NPT


150 psi

150 ps

6.4


12/14

VIKING3FFILTER HOUSING

Viking 3F Flanged

Application

Design Features300 gpm (1135.6 lpm) maximum flow

150 psi rating

Standard 3" flanged inlet/outlet flow

Epoxy coated on inside and out

8 bolt swing away lid

Inlet to Outlet dimensions 24"



Requires 4 6"x18" elements

MODEL: VIKING 3F



Convenient housing drain

Wide variety of filtering applications

Easy opening access and extra secure seal with 8 bolt swing lid


Benefits

6.5

Capable of filtering gasoline, ethanol blends up to E15, biodieseblends up to B100, diesel fuel, ultra-low sulfur diesel (ULSD), afuel oils

Industrial fluids such as lubrication oils, hydraulic oils, synthetoils, transformer oils, many solvents, and thinners may be filte




13/14



6.

Replacement Gaskets

90561 Standard Main Buna Gasket Seal Used On Viking 3F

90600 Optional Main Viton Gasket Seal Used On Viking 3F


Viking 3F Housing


Viking 3F Dimensional Information

Top View of Lid

NOTE: Viking 3F requires four elements.


Filter Element

6"

18"

E-1300-02

E-1300-10

E-1300-30

E-1300MG-03

E-1300MG-05

E-1300MG-10

E-1300HS-10

E-1300HS-30

Viking 3F ElementsPart No. Model Description

30066

30008

30009

30204

30203

30202

30034

30037


Media Blend.






Microglass Media.


Element for Water Detection and Particulate Removal. 30 Micron

Hydrosorb Media.

Inlet

40 1/2"

17"

59 1/4"

Outlet

6"

12"

12"

24"

40190

Viking 3F

Flanged Only



150 psi


14/14

500 gpm (1892.7 lpm) maximum flow

150 psi rating

Standard 4" flanged inlet/outlet flow


8 bolt swing away lid

Inlet to Outlet dimensions 28"


1/4" port for the optional pressuregauge kit

Requires 8 6"x 18" elements



Convenient housing drain

Wide variety of filtering applications

Easy opening and extra secure seal with 8 bolt swing lid


VIKING 4F

Benefits

FILTER HOUSING

Viking 4FFlanged

MODEL: VIKING 4F

Capable of filtering gasoline, ethanol blends up to E15, biodieseblends up to B100, diesel fuel, ultra-low sulfur diesel (ULSD), afuel oils

Industrial fluids such as lubrication oils, hydraulic oils, synthetoils, transformer oils, many solvents, and thinners may be filte


PETROLEUMFILTER TECHNOLOGY FOR PETROLEUM PRODUC

Cim-tek CLM

Documents

Transcript of Cim-tek CLM