CERTIFICATE - alvit.it · ANNEX TO ENEC CERTIFICATE 81-100011 page 1of 4 DEKRA Certification B.V....
5
DEKRA Certification B.V. 2 R drs. G.J. Zoetbrood Massimiliano Triulzi Managing Director Certification Manager © Integral publication of this certificate is allowed ACCREDITED BY THE DUTCH ACCREDITATION COUNCIL DEKRA Certification B.V. Meander 1051, 6825 MJ Arnhem P.O. Box 5185, 6802 ED Arnhem, The Netherlands T +31 88 96 83000 F +31 88 96 83100 www.dekra-certification.com Company registration 09085396 CERTIFICATE Issued to: Applicant: ALVIT Via Padania 6 20046 Biassono, Italy Manufacturer/Licensee: ALVIT Via Padania 6 20046 Biassono, Italy Product : Electronic controlgear for Light Emitting Diodes Trade name(s) : AV01 and ALVIT Type(s)/model(s) : ALT36100, ALT3624, ALT3650, ALT3670, ALT3690, ALT60150 and ALT6024 The product and any acceptable variation thereto is specified in the Annex to this certificate and the documents therein referred to. DEKRA hereby declares that the above-mentioned product has been certified on the basis of: - a type test according to the standard EN 61347-2-13:2014, EN 61347-1:2015, EN 62384:2006 and EN 62384:2006/A1:2009 - an inspection of the production location according to CENELEC Operational Document CIG 021 - a certification agreement with the number 3504102 DEKRA hereby grants the right to use the ENEC certification mark. Compliance with the requirements of this Standard carries a presumption of conformity with the essential safety requirements of the Low voltage directive (LVD) 2014/35/EU. The ENEC certification mark may be applied to the product as specified in this certificate for the duration of the ENEC certification agreement and under the conditions of the ENEC certification agreement. This certificate is issued on 26 April 2017 and expires upon withdrawal of one of the above mentioned standards. Certificate number: 81-100011
Transcript of CERTIFICATE - alvit.it · ANNEX TO ENEC CERTIFICATE 81-100011 page 1of 4 DEKRA Certification B.V....
DEKRA Certification B.V.
2 Rdrs. G.J. Zoetbrood Massimiliano TriulziManaging Director Certification Manager
© Integral publication of this certificate is allowed
ACCREDITED BY THEDUTCH ACCREDITATIONCOUNCIL
DEKRA Certification B.V. Meander 1051, 6825 MJ Arnhem P.O. Box 5185, 6802 ED Arnhem, The NetherlandsT +31 88 96 83000 F +31 88 96 83100 www.dekra-certification.com Company registration 09085396
CERTIFICATE
Issued to:Applicant:ALVITVia Padania 620046 Biassono, Italy
Manufacturer/Licensee:ALVITVia Padania 620046 Biassono, Italy
Product : Electronic controlgear for Light Emitting DiodesTrade name(s) : AV01 and ALVITType(s)/model(s) : ALT36100, ALT3624, ALT3650, ALT3670, ALT3690, ALT60150 and ALT6024
The product and any acceptable variation thereto is specified in the Annex to this certificate and the documents therein referred to.
DEKRA hereby declares that the above-mentioned product has been certified on the basis of:- a type test according to the standard EN 61347-2-13:2014, EN 61347-1:2015, EN 62384:2006 and
EN 62384:2006/A1:2009- an inspection of the production location according to CENELEC Operational Document CIG 021- a certification agreement with the number 3504102
DEKRA hereby grants the right to use the ENEC certification mark.
Compliance with the requirements of this Standard carries a presumption of conformity with the essential safety requirements of the Low voltage directive (LVD) 2014/35/EU.
The ENEC certification mark may be applied to the product as specified in this certificate for the duration of the ENEC certification agreement and under the conditions of the ENEC certification agreement.
This certificate is issued on 26 April 2017 and expires upon withdrawal of one of the above mentioned standards.
Certificate number: 81-100011
ANNEX TO ENEC CERTIFICATE 81-100011 page 1 of 4
DEKRA Certification B.V. Meander 1051, 6825 MJ Arnhem P.O. Box 5185, 6802 ED Arnhem, The NetherlandsT +31 88 96 83000 F +31 88 96 83100 www.dekra-certification.com Company registration 09085396
SPECIFICATION OF THE CERTIFIED PRODUCT
Product dataProduct : Electronic controlgear for Light Emitting DiodesTrade name(s) : AV01 and ALVITType(s)/model(s) : ALT36100, ALT3624, ALT3650, ALT3670, ALT3690, ALT60150
and ALT6024Connection to supply (PRI) : Screw less terminal block 0,5...1,5 mm²Connection to load (SEC) : Screw less terminal block 0,5...1,5 mm²Transformer insulation class : 130Impulse withstand category : IIPollution degree : 2 (normal pollution)
Product data – type ALT36100Constant : currentConstruction : Built-inInsulation : SELVSupply voltage : 220-240 / 176-280 VCurrent : 220/280 mA
Product data – type ALT3624Constant : voltageConstruction : Built-inInsulation : SELVSupply voltage : 220-240 / 176-280 VCurrent : 200/260 mA
Product data – type ALT3650Constant : currentConstruction : Built-inInsulation : SELVSupply voltage : 220-240 / 176-280 VCurrent : 180/250 mA
Product data – type ALT3670Constant : currentConstruction : Built-inInsulation : SELVSupply voltage : 220-240 / 176-280 VCurrent : 250/310 mA
Product data – type ALT3690Constant : currentConstruction : Built-inInsulation : SELVSupply voltage : 220-240 / 176-280 VCurrent : 220/280 mA
Product data – type ALT60150Constant : currentConstruction : Built-inInsulation : SELV
ANNEX TO ENEC CERTIFICATE 81-100011 page 2 of 4
DEKRA Certification B.V. Meander 1051, 6825 MJ Arnhem P.O. Box 5185, 6802 ED Arnhem, The NetherlandsT +31 88 96 83000 F +31 88 96 83100 www.dekra-certification.com Company registration 09085396
Supply voltage : 220-240 / 176-280 VCurrent : 370/410 mA
Product data – type ALT6024Constant : voltageConstruction : Built-inInsulation : SELVSupply voltage : 220-240 / 176-280 VCurrent : 310/420 mA
TESTS
Test requirementsEN 61347-2-13:2014EN 61347-1:2015EN 62384:2006EN 62384:2006/A1:2009
Test resultThe test results are laid down in DEKRA test file 350515800.
Additional InformationTest resultThe test results and critical components list are laid down in DEKRA test reports No. 3505158.50, 3505158.51, 3505158.52
For a complete list of models, see table on the last page
ConclusionThe examination proved that all requirements were met.
Factory locationALVITVia Padania 620046 Biassono, Italy
ANNEX TO ENEC CERTIFICATE 81-100011 page 3 of 4
DEKRA Certification B.V. Meander 1051, 6825 MJ Arnhem P.O. Box 5185, 6802 ED Arnhem, The NetherlandsT +31 88 96 83000 F +31 88 96 83100 www.dekra-certification.com Company registration 09085396
SPECIFICATION OF THE CERTIFIED PRODUCT
Models constant current
Models Classification Vin
VIin
mAHz Pin
WPFλ
IPXX
ALT3650 Built-inSELV
—220-240 180 50/60 34 0,82 C – 0,95
20
176-280 250 0 34 —
ALT3670 Built-inSELV
—220-240 250 50/60 45 0,90 C – 0,97
20
176-280 310 0 45 —
ALT3690 Built-inSELV
—220-240 220 50/60 46 0,88 C – 0,96
20
176-280 280 0 46 —
ALT36100 Built-inSELV
—220-240 220 50/60 45 0,90 C – 0,97
20
176-280 280 0 45 —
ALT60150 Built-inSELV
—220-240 370 50/60 66 0,90 C – 0,95
20176-280 410 0 66 —
Models constant voltage
ALT3624 Built-inSELV
—220-240 200 50/60 40 0,90 C – 0,96
20
176-280 260 0 40 —
ALT6024 Built-inSELV
—220-240 310 50/60 68 0,90 C – 0,96
20
176-280 420 0 68 —
ANNEX TO ENEC CERTIFICATE 81-100011 page 4 of 4
DEKRA Certification B.V. Meander 1051, 6825 MJ Arnhem P.O. Box 5185, 6802 ED Arnhem, The NetherlandsT +31 88 96 83000 F +31 88 96 83100 www.dekra-certification.com Company registration 09085396
Models constant current
Models Iout nom
mAVout operating
VPout
WUout
Vta
(°C)tc
(°C)
ALT3650 500 28 – 60 30 62 -10 +60 80
ALT3670 700 28 – 60 40 62 -10 +60 80
ALT3690 900 20 – 40 42 45 -10 +55 80
ALT36100 1000 18 – 40 40 45 -10 +60 80
ALT60150 1500 18 – 40 60 50 -10 +50 85
Models constant voltage
ALT3624 1500 24 36 24 -10 +50 85
ALT6024 2500 24 60 24 -10 +40 75
Additional information common to all the models:
Connection to supply (PRI) Screw less terminal block 0,5…1,5 mm2
Connection to load (SEC) Screw less terminal block 0,5…1,5 mm2
Transformer insulation class: 130
Impulse withstand category II
Pollution degree: 2 (normal pollution)
Overheating protection:
Electronic controlgear is comply with the temperature limits of VDE 0710 T14 (“MM” marking) and for mounting on normally flammable surface clause 4.16.2 of IEC 60598-1:2014
