DEKRA Certification B.V.

2 <drs. G.J. Zoetbrood H.R.M. BarendsManaging Director Certification Manager

© Integral publication of this certificate is allowed

ACCREDITED BY THEDUTCH ACCREDITATIONCOUNCIL

DEKRA Certification B.V. Meander 1051, 6825 MJ Arnhem P.O. Box 5185, 6802 ED Arnhem The NetherlandsT +31 88 96 83000 F +31 88 96 83100 www.dekra-certification.com Registered Arnhem 09085396

CERTIFICATE

Issued to:Applicant: Manufacturer/Licensee:ABB B.V.Frankeneng 156716 AA EdeThe Netherlands

ABB B.V.Frankeneng 156716 AA EdeThe Netherlands

Product : Connecting box for fixed electrical installationsTrade name : ABBType : HW52-F

The product and any acceptable variation thereto is specified in the Annex to this certificate and the documents therein referred to.

DEKRA hereby declares that the above-mentioned product has been certified on the basis of: a type test according to the NEN-EN-IEC 60670-1:2005 and NEN-EN-IEC 60670-22:2007 an inspection of the production location according to CENELEC Operational Document CIG 021 a certification agreement with the number 900017

DEKRA hereby grants the right to use the KEMA-KEUR certification mark.

The KEMA-KEUR certification mark may be applied to the product as specified in this certificate for the duration of the KEMA-KEUR certification agreement and under the conditions of the KEMA-KEURcertification agreement.

This certificate is issued on: 1 March 2017 and expires upon withdrawal of one of the above mentioned standards.

Certificate number: 2198657.01

ANNEX TO KEMA-KEUR CERTIFICATE 2198657.01 page 1 of 1

DEKRA Certification B.V. Meander 1051, 6825 MJ Arnhem P.O. Box 5185, 6802 ED Arnhem The NetherlandsT +31 88 96 83000 F +31 88 96 83100 www.dekra-certification.com Registered Arnhem 09085396

SPECIFICATION OF THE CERTIFIED PRODUCT

Product dataproduct : Connecting box for fixed electrical installationstrade name : ABBtype : HW52-Fratings : 16A/ 250V~model : Single box with fixraps and suitable for double inlet spout inserts 16/19mmmaterial : Thermoplasticdimensions : 65x65x50mm

TESTS

Test requirementsNEN-EN-IEC 60670-1:2005NEN-EN-IEC 60670-22:2007

Test resultThe test results are laid down in DEKRA test file 2198657.01.

ConclusionThe examination proved that all test requirements were met.

Tested by : R. van DaalenChecked by : R. Rosbag

Factory locationABB B.V.Frankeneng 15, 6716 AA EdeThe Netherlands

F{